Candidates are expected to:-

• Take lead of the shipboard engineering department and engineers in the maintenance, operations, and repairs of the vessel’s mechanical and electrical systems, equipment, and installations;
• Ensure seaworthiness and readiness of the vessel’s mechanical and electrical systems, equipment and installations in accordance to voyage schedule;
• Plan and maintain inventory of spare parts, fuel, and lubricating oil;
• Take charge of emergency drills and situations related to the vessel’s mechanical and electrical systems, equipment, and installations;
• Develop and control plans for the maintenance of technical installations and equipment throughout the vessel;
• Deploy vessel staff in close consultation with the Chief Mate and Second Engineer;
• Appraise the performance and potential of the vessel's staff in accordance with established company procedures
• Ensure the vessel has sufficient freshwater supply for the voyage;
• Oversee bunkering procedure and liaise with relevant stakeholders for the delivery of bunker vessel;
• Ensure compliance to all local, national and international environmental laws relating to maritime safety, pollution, and domains where applicable; and
• Perform survey work in accordance with Classification Society regulations.

The ideal candidate must:-

• Possess a valid Certificate of Competency (Marine Engineer Officer) Class 1; and
• Possess at least 3 years of experience as a Chief Engineer onboard a container vessel.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Candidates are expected to:-

• Take lead of the shipboard engineering department and engineers in the maintenance, operations, and repairs of the vessel’s mechanical and electrical systems, equipment, and installations;
• Ensure seaworthiness and readiness of the vessel’s mechanical and electrical systems, equipment and installations in accordance to voyage schedule;
• Plan and maintain inventory of spare parts, fuel, and lubricating oil;
• Take charge of emergency drills and situations related to the vessel’s mechanical and electrical systems, equipment, and installations;
• Develop and control plans for the maintenance of technical installations and equipment throughout the vessel;
• Deploy vessel staff in close consultation with the Chief Mate and Second Engineer;
• Appraise the performance and potential of the vessel's staff in accordance with established company procedures
• Ensure the vessel has sufficient freshwater supply for the voyage;
• Oversee bunkering procedure and liaise with relevant stakeholders for the delivery of bunker vessel;
• Ensure compliance to all local, national and international environmental laws relating to maritime safety, pollution, and domains where applicable; and
• Perform survey work in accordance with Classification Society regulations.

The ideal candidate must:-

• Possess a valid Certificate of Competency (Marine Engineer Officer) Class 1; and
• Possess at least 3 years of experience as a Chief Engineer onboard a container vessel.

Product area

Google Cloud accelerates every organization’s ability to digitally transform its business and industry. We deliver enterprise-grade solutions that leverage Google’s cutting-edge technology, and tools that help developers build more sustainably. Customers in more than 200 countries and territories turn to Google Cloud as their trusted partner to enable growth and solve their most critical business problems.

Job description

When leading companies choose Google Cloud, it's a huge win for spreading the power of cloud computing globally. Once educational institutions, government agencies, and other businesses sign on to use Google Cloud products, you come in to facilitate making their work more productive, mobile, and collaborative. You listen and deliver what is most helpful for the customer. You assist fellow sales Googlers by problem-solving key technical issues for our customers. You liaise with the product marketing management and engineering teams to stay on top of industry trends and devise enhancements to Google Cloud products.

Additional job description

As a Customer Engineer, you will partner with Cloud Sales teams to differentiate Google Cloud to our customers. You will help prospective and existing customers and partners understand the power of Google Cloud, develop creative cloud solutions and architectures to solve their business challenges, engage in proofs of concepts, and address any technical questions and roadblocks. You will use your expertise and presentation skills to engage with customers to understand their business and technical requirements, and persuasively present practical and useful solutions on Google Cloud.

You will be a part of a diverse team of fellow Googlers working in an environment of respect and inclusion where we promote equal opportunities to succeed.

Qualifications

Job responsibilities

• Work with the team to identify and qualify business opportunities, understand key customer technical objections, and develop the strategy to resolve technical blockers.
• Share enterprise infrastructure modernization expertise to support the technical relationship with customers, including technology advocacy, supporting bid responses, product and solution briefings, proof-of-concept work, and partnering directly with product management to prioritize solutions impacting customer adoption to Google Cloud.
• Guide customers through assessments of existing legacy application environments and provide recommendations on a prioritization roadmap for infrastructure and application modernization.
• Recommend integration strategies, enterprise architectures, platforms, and application infrastructure required to implement a complete solution on Google Cloud.

Minimum qualifications

• Bachelor's degree or equivalent practical experience.
• 4 years of experience with cloud native architecture in a customer-facing or support role.
• Experience engaging with, and presenting to technical stakeholders and executive leaders.
• Ability to communicate in Korean and English fluently to support client relationship management.

Preferred qualifications

• Experience in migrating applications and services to cloud platforms.
• Experience with cloud infrastructure engineering, on-premise infrastructure engineering, virtualization, or containerization platforms.
• Experience with security concepts such as encryption, identity management, access control, attack vectors, and pen testing.
• Experience with networking concepts such as software-defined networking, routing, virtual private networks, load balancers and firewalls.
• Experience prospecting, and building and maintaining customer relationships from scratch, with excitement for building Greenfield territories in SMB, Mid Market and Startup accounts.

As a 3D Graphics Engineer Intern, you will be developing graphics components and applications for our products. In this role, you will work closely with UI-UX designers and the R&D team to collaboratively solve real-world problems.

What will you do

• Design, build and maintain efficient and reliable software modules for Screening Eagle software products.
• Develop tools for real-time interactive 3D graphics applications.
• Analyse & optimise 3D rendering pipelines.
• Assist other team members to implement next generation NDT solutions.
• Collaborate with team members to integrate the components to mobile and web platforms end products.

What do we expect

• Pursuing BA/MA/MS/PhD degree in Computer Science, Computer Graphics, or strong experience in 3D Games/CV/Robotics.
• Proficiency in C++11 and above, or comparable languages.
• Good understanding of software design patterns.
• Good knowledge of data structures and algorithms for OOP.
• Good understanding of memory management in non-garbage collected environments.
• Familiar with memory and CPU usage optimization.
• Familiar with 3D graphics pipelines and optimization techniques.
• Familiar with OpenGL / Vulkan / Metal.
• Solid linear algebra knowledge.
• Experience in developing for and integrating third party software on mobile and web tech stacks.
• Familiar with uitilizing machine learning algorithms for vision problems.
• Understanding of 2D/3D graphics pipeline and GPU programming.
• Experience with Windows, Linux platform, MacOS and iOS.

Responsibilities:

• Design, development, testing and support of firmware/embedded software applications for microcontroller based wireless systems.
• Develop software communication protocols for wireless communication systems
• Drive technology/development projects in all phrases from specification to release.
• Read or understand electronics schematic and system design.
• Work closely with cross functional teams to ensure project delivery on time.
• Define and create product software specification including software architecture, feature descriptions and applications notes of the system
• Research technical issues and/or opportunities and provide recommendations.
• Participate in ad hoc software projects and assignments as required.

Requirement:

• Degree in Electronic/Electrical/Computer Engineering/Computer Science, Software Engineering or related fields.
• Minimum 3-5 years of experience in real time embedded system
• Must process strong knowledge of C/C++ language
• Experience with Arm, Cortex based microcontroller is required
• Strong Knowledge of the communication transport protocol like I2C, SPI, UART and USB
• Understanding of the Bluetooth protocol and stack is a plus.
• Familiarity with DSP programming is an added advantage
• Excellent teamwork skills, flexibility, and ability to handle multiple tasks.
• Able to manage one's own time efficiently

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

About NUS IT

NUS Information Technology is the cornerstone to providing reliable, high-performance and secure IT solutions and effective IT governance for the campus. Here at NUS IT, we aim to transform NUS into a borderless computing community providing knowledge at its fingertips by enhancing the use of effective applications and services for teaching and learning.

We drive a culture that is forward-looking. With a strong passion for IT, our people are always striving to improve, push boundaries and innovate with a "can-do" attitude. We embrace collaboration, open communication and knowledge sharing. If you see yourself thriving in a dynamic environment and breaking new grounds with innovative ideas, you will find yourself at home in NUS IT.

As part of our team, you can look forward an empowered work environment that allows you to take charge of your own career path. We provide competitive remuneration as well as flexible work arrangements to enable your growth and development. We pride ourselves on our diverse workforce and are committed to transforming NUS into a leading global University shaping the future.

https://nusit.nus.edu.sg/

Job Description

You will be part of the End-User support team that is responsible to manage the day-to-day support for faculties, schools and departments. You will work across a broad range of technologies and liaise across multiple areas of the business to support incidents, problems and requests and be responsible for answering IT requests via phone, email and IT Ticketing System.

Duties and Responsibilities

• Supervise and manage a team of IT desktop support engineers to provide effective and timely IT desktop support, advice, guidance and timely problem resolution to achieve desired operational outcomes.
• Manage day-to-day work activities of a team, including rostering, customer experience, SLA and prioritising and allocating service tickets.
• Provide level 1.5 technical support and advice to users on EUD related issues or queries.
• Provide effective and timely day-to-day End-User device support, advice, guidance and diagnosis, and timely problem resolution.
• Maintain PCs/laptops, mobile devices, IP phone systems, printers and peripherals, etc.
• Support the use of End-User devices such as PC, laptops, tablets and mobile devices running on MS Windows, Linux, Mac OS, iOS, Android, etc.
• Support the use of IT applications such as O365, Faculty software and utility applications e.g., Adobe, Zip, etc.
• Provide technical consultation and advice to users on End-User devices.
• Work closely with technical teams to provide technical solutions.
• Assist IT Business Partner with miscellaneous administrative and management duties.

Qualifications

• Diploma in Computer Science / Information Technology / Software Engineering or equivalent.
• Minimum 5 years of working experience with 2 – 3 years of team lead experience in managing and supervising a team.
• Good knowledge on basic networks, security, printers, desktops/ laptops/mobile devices, endpoint security and imaging.
• Good experience in troubleshooting MS Windows Operating Systems, Linux, Mac OS, iOS, Android and vulnerability resolutions
• Good customer service, communications and problem-solving skills.
• Knowledge in ITIL processes will be an advantage
• Good communication skills.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

• Recipe creation and optimisation for new R&D applications requirement.
• Preventive and corrective maintenance planning cum execution and vendor management.
• To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up
• Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).
• To set-up appropriate process and product control plan and out of control action plans (OCAP)
• Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

• Diploma/Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering
• Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)
• Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)
• Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

• Recipe creation and optimisation for new R&D applications requirement.
• Preventive and corrective maintenance planning cum execution and vendor management.
• To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up
• Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).
• To set-up appropriate process and product control plan and out of control action plans (OCAP)
• Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

• Diploma/Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering
• Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)
• Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)
• Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

We are hiring a lead engineer for the software development of healthcare application platform. The potential candidate will be involved in the development and solutioning for the transformation of Singapore Healthcare IT landscape. The candidate will be working with a team of dedicated & committed engineers to deliver the next generation healthcare digital experience across whole of Singapore

• Translate business requirements into technical architectures & detail design, including resilient integration with external systems

• Develop solutions in hybrid cloud environment

• Design robust application that complies with IT Policies

• Hands-on development and mentoring of junior team member

• Work closely with DevOps engineer for Release management

• Bachelor's Degree, Post Graduate Diploma, Professional Degree in Computer Science, Information Technology.

• 8+ years of relevant work experience in software product development.

• Experience developing applications using native cloud service offer by AWS or Azure

• Experience with Containers and Orchestration such as Kubernetes/OpenShift

• Experience in design and implementation of REST API, and ensure the API is compliant to healthcare industry standards HL7 FHIR

• Experience in Microservice architecture design and implementation

• Hands-on development experience for Backend application (C# .Net core)

• Knowledge and experience in frontend development (e.g. Reactjs) will be advantageous

• Sound knowledge and experience in application design patterns

• Experience in Azure DevOps or equivalent CI/CD

Responsibility & Scope of works:

• Manage, supervise and co-ordinate small projects, electrical installation turn-on inspection & licensing inspection undertaken by the Company and works assigned to you by the Project Manager.
• Participate in company tender exercise and quotation.
• Assist in price negotiation, drawings preparation and related activities.
• Ensure timely requisition of resources such as labour, materials, equipment for the small project works - power upgrading, tenancy renovation works, A&A works, etc.
• To issue site purchase order - purchasing material for electrical installation works.
• Inspection & Testing of the electrical safety of electrical installation in commercial and retail, healthcare, industrial building in compliance with Code of Practices.

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree in Electrical/Power/Electronics Engineering
• Good communication skills, team player, independent, strong leadership and self-motivated
• Knowledge in Electrical Installation (EI)
• At least 2-3 years working experience in the related field.
• Full-time position

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

Responsibilities:

1. Perform system-level testing, including unit testing, integration testing, and regression testing for communication, positioning, and radar systems.

2. Design and execute detailed test plans to ensure the reliability and performance of embedded systems.

3. Develop and maintain automated testing scripts using Python or other relevant tools.

4. Collaborate with R&D engineers to identify and resolve bugs.

5. Utilize diagnostic tools to perform hardware-in-the-loop (HIL) testing.

6. Generate comprehensive reports based on test results, providing insights for product enhancement.

7. Contribute to the continuous improvement of testing frameworks and methodologies.

Requirements:

1. Diploma degree or above in software engineering, computer science, electronics, telecommunication or a related field.

2. Proficiency in Python for scripting automated tests.

3. Knowledge of network equipment, communication protocols, and embedded systems.

4. Strong analytical skills, attention to detail, and problem-solving capabilities.

5. Effective communication skills and a proactive, collaborative mindset.

Job Description:

DxD Hub is seeking an experienced UI/UX engineer for our product development for our Digital Diagnostics Team. In this role, you will play a crucial role in driving the user interface and experience of digital health products in collaboration with external partners (especially clinicians). The ideal candidate should possess a strong usability engineering skills and able to translate expectation to visualisation and handover to technical team.

Job Responsibilities:

• Design innovative app experiences based on the understanding of personas, their behaviors and needs as well as competitive market insights.
• Collaborate with partners to understand their goals and propose a user-centric approach to improve digital services.
• Communicate design ideas through tools such as sketches, user journeys, storyboards, mind maps, wireframes, and clickable prototypes.
• Drive user research activities such as, usability testing, user interviews, surveys, and translate research findings into meaningful recommendations.
• Guide all aspects of UX including design research, design strategy, user experience, usability testing, interaction/content design and prototyping.
• Work closely with Product Owners to ensure all design work meets user needs and business requirements.
• Create a design-minded environment and build design capabilities amongst project team members.

Job Requirements:

• Degree or Diploma in Human Computer Interactions, Design, Psychology, Computer Science or related fields
• 1-2 years’ experience in user-centered design with hands on experience building visual identities for web and mobile app UI.
• Experience in delivering wireframes, UX flows, mockups, interactive prototypes, design specifications, and final assets.
• Experience with design/wireframing software such as: Figma, Sketch, Adobe suite, or equivalent.
• Strong portfolio showcasing your best design work for web and mobile.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

DxD Hub is seeking an experienced UI/UX engineer for our product development for our Digital Diagnostics Team. In this role, you will play a crucial role in driving the user interface and experience of digital health products in collaboration with external partners (especially clinicians). The ideal candidate should possess a strong usability engineering skills and able to translate expectation to visualisation and handover to technical team.

Job Responsibilities:

• Design innovative app experiences based on the understanding of personas, their behaviors and needs as well as competitive market insights.
• Collaborate with partners to understand their goals and propose a user-centric approach to improve digital services.
• Communicate design ideas through tools such as sketches, user journeys, storyboards, mind maps, wireframes, and clickable prototypes.
• Drive user research activities such as, usability testing, user interviews, surveys, and translate research findings into meaningful recommendations.
• Guide all aspects of UX including design research, design strategy, user experience, usability testing, interaction/content design and prototyping.
• Work closely with Product Owners to ensure all design work meets user needs and business requirements.
• Create a design-minded environment and build design capabilities amongst project team members.

Job Requirements:

• Degree or Diploma in Human Computer Interactions, Design, Psychology, Computer Science or related fields
• 5 years’ experience in user-centered design with hands on experience building visual identities for web and mobile app UI.
• Experience in delivering wireframes, UX flows, mockups, interactive prototypes, design specifications, and final assets.
• Experience with design/wireframing software such as: Figma, Sketch, Adobe suite, or equivalent.
• Strong portfolio showcasing your best design work for web and mobile.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Title: Sales & Marketing Engineer (ID6004)
Location: Yishun
Working Hours: Mon to Fri( 8:30am -5:30pm) Sat (8:30am -12:30pm)
Salary: S$3,200 to S$4,500

Key Responsibilities:
1. Sales and Business Development:
-Identify and pursue new business opportunities within the assigned market segments.
-Develop and maintain a robust sales pipeline.
-Conduct market research to understand customer needs and industry trends.
-Collaborate with cross-functional teams to tailor solutions to customer requirements.
-Prepare and deliver technical presentations explaining products or services to customers and prospective clients.

2. Marketing and Promotion:
-Create and execute marketing strategies to enhance brand visibility.
-Leverage online marketing platforms (such as social media, email campaigns, and webinars) to reach potential clients.
-Participate in trade shows, conferences, industry events to qualify and generate business leads.
-Develop compelling product presentations and collateral.
-Leads generation role.

3. Technical Expertise:
-Familiarity with cleanroom environments and their impact on product specifications.
-Knowledge of mechatronics or bioprocess equipment is advantageous.
-Ability to translate technical features into customer benefits.

4. Relationship Building:
-Cultivate strong relationships with existing clients and prospects.
-Understand customer pain points and provide tailored solutions.
-Conduct regular client visits and maintain open communication channels.

5. Communication and Cold Calling:
-Excellent verbal and written communication skills.
-Comfortable making cold calls to potential clients.
-Engage in consultative selling to understand client needs deeply.

6. Personal Attributes:
-Mature and confident demeanour.
-Positive attitude and enthusiasm for meeting people.
-Strong analytical skills for market analysis and forecasting.
-Ability to work independently and as part of a team.
-Able to take up extra responsibilities assigned from time to time.
-Enjoy learning and take out new challenges.

Qualifications:
• Technical certificate/diploma in Engineering, Business, Marketing, Pharmaceutical engineering or a related field, or “A” Level.
• Proficiency in English, Mandarin (Bonus: Malay, and another ASEAN language)
• Prior experience in technical sales or marketing preferred but not mandatory.
• Familiarity with online marketing platforms (e.g., Google Ads, LinkedIn, etc.).
• Possess Class 2 or 3 Licence
• Fresh graduates are welcome.

What you will do

• APU Physical Design Implementation for APU partitions focus on MDLA/NDLA n5/n4/n3e/ process
• Physical VerificaTion to deliver clean APU partition gds N5/n4/n3e/ process
• Perform Timing Closure ECO for APU partition including PrimeTime timing check and twk timing ECO

What you bring

• Apr hands on for n5/n4/n3e process using Innovus and Fusion compiler EDA tool
• tcl/csh/perl/bash. programming skill
• Timing Analysis Debugging and Fixing skills
• Experienced N4/N3e process

Job Description & Requirements

Responsibilities:

1. Responsible for maintaining our machine learning framework
2. Responsible for the cleaning, processing and analysis of both unstructured and structured texts in the FinTech area
3. Participate in the development and upgrade of our machine learning and data mining algorithms

Requirements:

1. Degree in Computer Science or similar field
2. 1+ years experience in data processing, data analytics or data visualization
3. Proficient in Python programming language
4. Familiar with data analytics libraries like NumPy and Pandas
5. Experience with relational databases (e.g. MySQL) and key-value databases (e.g. Redis)
6. Experience in RESTFul API service development and familiarity with HTTP / TCP
7. Familiarity with Container techniques including Docker and Kubernetes is preferred
8. Strong communication skills in Chinese and English to communicate with associates

Job Description:

• Responsible for ensuring that the Electrical Integrity Inspection scope of work is executed with technical excellence, acting as a technical reference and local legal representative, focusing on the Electrical Integrity Management Process, ensuring the execution of inspections, generation of recommendations, quality assurance and quality control of subcontractors, and development and improvement of inspection plans, in order to maximize reliability, availability, maintenance, safety and integrity of assets (RAMSI), as well as contributing to the Operations procedures and achievement of results established for the business.
• Support MdB's annual corporate budget planning (expenses and investments) by participating and advising the team on corporate planning, providing information on workforce planning for Electrical Integrity Inspection and on resource needs, services and materials and other expenses used in its activities.
• Guarantee the continuous improvement of IMS by monitoring projects status and ensuring that IMS Documents under Reliability Coordination are updated and implemented.
• Reference to assist in the analysis of inspection results, traceability of information, proper root cause elaboration, and issuance of technical review/recommendation.

Education & Experience:

• Minimum 12 year experience operating with Oil and Gas industry
• Minimum 18 year experience working as Electrical Engineer
• Experience with FPSO is preferred
• Bachelor in Engineering

Key Responsibilities

• Design, develop, and maintain high-performance C++ applications.
• Collaborate with software architects and other developers to design system architecture and APIs.
• Optimize code for performance, scalability, and reliability.
• Debug and resolve complex technical issues, providing mentorship to junior developers.
• Write clean, maintainable, and well-documented code.
• Participate in code reviews and contribute to best practices.
• Work closely with QA teams to ensure high-quality software delivery.
• Stay updated on the latest industry trends and technologies to continuously improve development processes.

Qualifications

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• Strong understanding of object-oriented programming (OOP) and design patterns.
• Experience with multi-threading, concurrency, and parallel processing.
• Proficient in C++11/14/17 standards and familiarity with C++20.
• Experience with debugging tools and performance profiling.
• Familiarity with Linux/Unix operating systems.
• Knowledge of software development lifecycle (SDLC) and agile methodologies.
• Excellent problem-solving skills and attention to detail.
• Strong communication skills and the ability to work well in a team environment.
• Knowledge of other programming languages such as Python, JavaScript
• Experience with Electron and node modules

Temus was established by Temasek in partnership with UST, to provide digital transformation solutions for the private and public sectors as we aspire to be a strategic partner in realising the Singapore Government’s Smart Nation vision. We are headquartered in Singapore and have more than 400 employees across a wide range of disciplines in strategy, design, architecture, technology, data & AI.

Responsibilities:

• Collaborate closely with the GCC engineering team, product team, and other key stakeholders.
• Help develop proof-of-concept projects for the GCC platform alongside the product team and various stakeholders.
• Take responsibility for comprehensive solutions delivered by teams throughout the organization.
• Offer troubleshooting and problem-solving support across platform and application areas, including participating in on-call escalations for customer-facing issues.
• Support migration efforts for GCC platforms.

Requirements:

• Degree in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.
• Experienced in managing cloud infrastructure and services on AWS, Microsoft Azure, or Google Cloud Platform is preferred.
• User-focused approach: Able to advocate for users' perspectives on GCC to promote changes and innovations that address their needs.
• Proficient in designing, building, deploying, and securing highly available web applications on cloud platforms like AWS, Microsoft Azure, or Google Cloud Platform.
• Familiarity with DevOps tools such as GitLab or Azure DevOps.
• Experienced with back-end technologies like Node.js, Python, or Go.
• Solid understanding of network components, including load balancers, firewalls, VPNs, and DNS.
• Good understanding of DevOps principles and practices; knowledge of DevSecOps is a plus.
• Experience in an Agile development environment, focusing on rapid and quality delivery.

Temus is an equal opportunities employer. We welcome applications from all. We do not discriminate by race, religion, belief, ethnicity, origin, disability, age, partnership status, sexual orientation, or gender identity.

We see the diversity of our team as a strategic advantage, and we work actively to maintain it.

By applying for this role, you have read and acknowledge the data privacy statement via this link - temus.com/job-applicant-data-protection/

Job Description:

- Integrate, install, service, and troubleshoot auto-mechanical, electrical, and electronic systems, according to process instructions

- Carry out calibration / acceptance test on sub-systems/equipment, according to process instructions

- Perform functional checks, setting, testing, fault finding and failure analysis

- Provide support services in users' training courses, and other operational exercises

- Liaise with customers on schedule, planning, monitor, control, and execution of works

Job Requirements:

- Diploma in Electrical/ Electronics/ Mechatronics/ Mechanical Engineering preferred

- Able to interpret schematics, technical manuals, and drawings for assembly and maintenance works

- Good verbal and written communication skills

- Ability to use analytical skills and a "hands-on" person

- Good interpersonal skills, proactive and work well with others

- Preferably with valid Class 3 driving license

About The Team

We are the bank's security engineering team - our mission is simple - we make sure that we build and leverage secure systems and operate them at production scale in a secure way. Our engineering teams move fast and are constantly innovating, and our security engineers need to ensure we provide the right tools and processes to help them move at high velocity.

We are a builder function, we build tools and processes that bring to life the banks security standards and policies. We use security metrics to make continuous improvements to security controls and culture. We strive for automation and love Jira tickets. What is not measured, can not be improved.

Get to know the Role:

• We are seeking security engineers who are excited about shaping the future of information security by building security tools to identify and eradicate vulnerabilities across all stages of the software development lifecycle.
• Our team covers line one control ownership of multiple domains, including cloud, DevSecOps, privileged access management, runtime, containers, kubernetes, cryptography, SaaS security and automated response.
• You will work on a public cloud security program with an aim of real-time vulnerability identification and automatic remediation.
• You will work with public cloud, terraform, commercial cloud posture security management tools, open-source kubernetes admission controllers (Kyverno) and build tools that automate our security posture.

The day-to-day activities:

• Design and implement cutting edge preventative and detective controls
• Shift security left in the engineering life-cycle by implementing commercial, security tools and scanners.
• Collaborate with experienced security engineers and engineering squad leads to research and build solutions geared towards identifying security issues at scale
• Evaluate/extend/contribute to existing open-source security tools and integrate them into pipelines.
• Constantly evaluate our progress and work on solutions to raise our security bar at scale. You understand that security is a continuous, ever evolving process.
• Design and implement cutting edge security tools and scanners, including static application security testing (SAST) and dynamic application security testing (DAST).
• Design and implement an automated security scanning solution for cloud infrastructure as code, experience using Sentinel policies for Terraform is preferred.

The must-haves:

• An understanding of public cloud security and cloud native security services is a plus
• An understanding of common global and industry standard control frameworks (CIS, NIST800-53, PCI-DSS)
• Should have relevant experience of 4 to 5 years
• Experience with scripting/programming security automation. While you do not need to be a full time programmer, we do strive for automation and are required to glue a lot of our processes together. Go, Python, etc.
• Experience with container platforms and frameworks is preferred (AWS EKS, Docker, Kubernetes, Admission Controllers, Kyverno).