Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

Job Summary

Process & Mechanical design, design review, RFQ preparation, technical evaluation, site installation supervision and coordination.

Job Description

• Review engineering standards/specifications/drawings, tender, quotations and proposal documents.
• Preliminary and detailed process & mechanical design of chemical plant, incineration plant, food waste plant, water/wastewater plant, offsites & utilities, pollution abatement, etc. including mechanical specification, design calculation, equipment layout design, support design, etc.
• Collaborate with BIM team for 3D model development and ensure the model is according to design.
• Coordination of internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are achieved and exceeded.
• Prepare mechanical equipment requisitions and to ensure that the items procured are in accordance with specifications and schedule to ensure timely delivery.
• Technical review of mechanical equipment/system vendors proposal and submission.
• Coordination with equipment/system vendors on mechanical design and installation work during project execution stage.
• Prepare mechanical technical submissions and work with design lead to liaise with stakeholders, not limited to client/project consultant for submission approval.
• Prepare method statement for all the equipment installation
• Support during construction, installation, start-up, testing and commissioning activities.
• Ensure compliance & perform any other duties as requested by design lead/ engineering management.

Requirement

• Bachelor’s degree in Chemical or Mechanical Engineering or related engineering discipline.
• 3 years and above in process & mechanical design in process plant (such as chemical plant, incineration plant, food waste, water/wastewater plant, offsites & utilities, ACMV, pollution abatement, etc) and hands on experience working in fast paced, diverse and multi-disciplined projects and O&M activities.
• Familiar with process & mechanical design code of practice and standards in Singapore, EN, ASME & PED.
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office software.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Willingness to take on responsibility and work overtime to meet deadlines.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Ability to uphold the use of standards and escalate issues in a timely fashion.
• Ability to work independently with minimal oversight.

Qualification/ Requirements

1. Degree in Civil & Structure Engineer (recognized by PEB)

2. Minimum 5 years Experience in Civil & Structures Work

3. 6 Days work arrangement

Job Scope

1. To assist attend and prepare for tender/ quotation related matters

2. To plan and prepare for works as per required

3. To attend meeting with clients, authorities and others when necessary

4. To carry out work related to civil & structural such as construction building supervision, periodic structural inspections, road audit and any other jobs as per instructed.

5. To prepare reports and any other necessary paper works as required by clients, authorities or company.

6. To carry out other tasks/ instructions from Project Director and management of the company.

Softskill

1. Able to communicate and have good writing skill in English

2. Have good knowledge in computer skill such as Microsoft Office, Design softwares and Autocaad.

3. Able to deliver quality works under short deadline.

4. Post a positive work attitude such as able to perform task independently with minimum supervision, good team works and hardworking

5.Possess good leadership, planning and decision-making skills

6.Possess good communication and interpersonal skills

Responsibilities:

·Plan, execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery

·Conduct root cause analysis & implement pro-active measures

·Responsible for supporting operational systems satisfying contractual Service Level Agreement

·Perform and manage routine preventive maintenance and operational activities promptly and effectively

·Perform troubleshooting and fault rectification

·Provide up-to-date project documentation and reports

·Diagnose and rectify technical issues

·Perform standby duties if required

Requirements:

·Experience in Windows server OS, Unix/Linux OS & virtualization environment (VMware, HyperV etc.)

·Strong troubleshooting skills and analytical mind with problem-solving aptitude

· Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment

·Pro-active, dynamic and with good analytical/conceptual thinking

·Able to work independently as well as in a team and good interpersonal skills

·Good Working knowledge with VPN, firewall appliances would be an advantage

·Good working knowledge with routers, switches would be an advantage

·Good working knowledge in hardware like servers, storage area networks (SAN), network-attached storage (NAS) devices

•Experience in hardening of OS, system and network equipment

•Experience in Patch Management

•Good Knowledge of IT Infra services like Active Directory, DHCP, DNS, Exchange/Mail Service, Database, Web or App Server etc.

·Entry level candidates are welcome. Candidates with more/ complexity of experience will be considered for a senior role.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

1. Installing and configuring computer hardware, software, systems, networks, printers and scanners
2. Responding in a timely manner to service issues and requests in token based or maintenance support based
3. Providing technical support across the company (onsite or remote)
4. Troubleshooting Level-1 cases and escalate if needed
5. Liaising with vendors for maintenance service
6. Onsite deploy network / system projects
7. Other ad hoc duties assigned

Job requirements

1. Higher Diploma or higher in IT/Network/Communication related subject
2. Good working attitude
3. Related experience in IT/Network/Communication industry
4. As most of our clients are China and Hong Kong-based companies and the company's headquarters is in Hong Kong, candidates will need to frequently communicate and coordinate with the headquarters and Mandarin speaking clients to execute/report projects by using English and Mandarin proficiently.

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS system experience and DeltaV Batch experience required
• Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.

Job Description

• Collaborate with stakeholders (customers, partners, colleagues) on data-related technical issues and infrastructure needs.
• Work with data scientists to gather data requirements for modeling.
• Design, develop, document, manage, and maintain data models, ETL processes, data warehouses, data management, and pipeline solutions for large volumes of structured/unstructured data from various sources with different latencies (on-demand, batch, real-time, near-real-time).
• Define, monitor, and report SLAs for data pipelines and products.
• Ensure data security and governance standards are met.
• Execute data quality assurance practices.
• Support data management solutions pre-sales initiatives, proposal development, and provide post-sales support.

Technical Knowledge/Skills/Competencies

• Expertise in relational/non-relational/NoSQL databases and enterprise data warehouses/marts.
• Proficiency in big data technologies (e.g., Hadoop, Spark, Hive, HBase).
• Knowledge of data ingestion technologies (e.g., Flume, Kafka, NiFi).
• Experience in scripting, programming, and software development (e.g., Java, C/C++, Python, R, MATLAB, Scala, SQL) for Windows or Linux.
• Experience in master data management, data governance, and data lifecycle management.
• Skilled in designing, documenting, implementing, and supporting data management solutions.
• Familiarity with software engineering best practices (development, programming, testing, version control).
• Knowledge of data privacy and security assurance.
• Understanding of machine learning, computer vision, and large language models is a plus.

Soft Skills

• Excellent written and verbal communication skills.
• Highly organized, motivated, independent, and resourceful team player.
• Strong analytical thinking, interpersonal, and problem-solving skills.
• Ability to work productively in a matrix reporting and fast-paced environment.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

• Plan, execute, and monitor technical aspects of projects.
• Manage or support system/network setup and upgrades.
• Ensure operational systems meet Service Level Agreements.
• Perform routine maintenance and operational tasks. Provide project documentation and reports.
• Diagnose and resolve technical issues.

Requirements:

• Experience with Windows Server OS, Unix/Linux OS, and VM environments.
• Knowledge of Microsoft SQL Server is a plus.
• Familiarity with VPN, firewall appliances, and Cisco routers/switches.
• Strong communication skills for technical and non-technical audiences.
• Proactive, dynamic, and analytical.
• Fresh graduates welcome

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Job Highlights

• Permanent Position / MNC/ Near Woodlands MRT/ Urgent Hiring!!
• Afternoon Shift (Monday to Friday: 3pm – 11pm, Sat: 1pm - & 7pm)
• Afternoon Shift allowance
• AWS bonus, Annual Leave,Medical Benefit, Dental Benefit

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities

• Responsible for all automation related activities of the product.
• Responsible for the Maintenance and Repair of production automated machines.
• Optimise automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipments are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues
• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Continuous Improvement to enhance quality and productivity through automated processes
• Perform internal quality system audit.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement

Requirements

• Degree/Diploma in Engineering-related discipline, preferably Mechatronics
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA
• Results-oriented, meticulous and a self-motivated team player

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

What will you do?

• Takes ownership for validating the project’s statement of work and contract terms with the customer, including both technical and commercial elements, becomes lead contact for customer for balance of project order. (Project Initiation).
• Develops a project schedule and communicates with the customer to ensure expectations are being met. Direct engagement with internal manufacturing facilities and third party vendors. (Project Planning).
• Monitor the execution of the customer’s project order, verifying execution of the project through kick-off meetings, communication to all parties and exchange of technical requirements and project plan information, performance of factory acceptance, site acceptance, site energization preparation. (Project Execution)
• Lead the monitor and control of the performance of the customer’s project through its lifecycle. Key activities include task completion verification, project team monitoring, managing the exchange of project updates across the project team members, schedule reporting, issue resolution, and contract administration. (Monitor and Control Project Work)
• Lead the closeout of the customer’s project to include financial reconciliation, verification of job site equipment arrival, installation, start-up, and training support completion through review of internal system information, contact with the customer, and coordination with support services such as field services, after-shipment support, and training functions. (Project Close)
• Compares/differentiates/propose alternate products with additional customer value compared to competition.
• Solves problems with customer interaction that results in positive feedback and improved relationship.
• Utilizes a base knowledge of Schneider Electric products and their use would be an advantage and demonstrates an understanding of the fundamental knowledge, processes and terminology needed for effective project management.
• Manage, control and supervision of site activities, including preparation of method of statement, site risk assessment, liaise with customer’s safety personal and provide guidance and instruction to vendor for installation, testing and commissioning

What qualifications will make you successful?

• Diploma / Degree in Electrical Engineering or Equivalent.
• 3-5 years proven track record in managing electrical equipment and package projects
• Familiar with standards and regulatory requirements.
• Commercial and legal implications of contracts.
• Good understanding of budgeting and financial implications, including cash flows
• Proficient in English and computer literate.
• Good knowledge of contract law and trade documents, project management.
• Good knowledge of electrical distribution systems and standards.
• Proactive & able to work independently.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are a looking for QA/QC Engineer (Contract) to make an impact! In this role, you will be accountable to build and drive the quality processes, execution and teams for its Data Centre projects in APAC. You will work closely with the project sponsors and project management team to define the project objectives, create a plan for executing those objectives. Dependant on the systems demand, the role will include working on multiple projects or directly on a single specific project in APAC.

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Ensure Quality-related activities on the Project are compliance to Corporate, Project, and other applicable Regulatory requirements.
• Implement BIM360 QA/QC dashboards to show overall KPI metrics and status, and manage documentation tracking, distribution and submission through various collaboration tools.
• Generate Project high-level Plans/Guidelines to provide roadmap for key Quality related activities.
• Ensure knowledge transfer / lessons learnt of execution issues to local customer & SE teams. Ensure compliance to overall program.
• Ensure adequate and suitably qualified Quality team resources are available to support Project Quality requirements.
• Involve in Project Review in conjunction with Engineering/Construction phases of the Project and ensure appropriate closure of observations/issues raised from review, generation of final review closeout report.
• Ensure Project SOP’s/Plans/Guidelines are appropriately authorized for implementation and adequate training provided.
• Develop, implement and manage an effective Audit Schedule focusing on the key work processes, and design activities undertaken during the project lifespan.
• Review and approve Quality Records/Reports, Engineering Drawings, Change Notices/Design Modifications, Quality Plans, Inspection Test Plans, etc.
• Conduct and maintain training program for relevant project personnel for Project SOP’s/GDP/GEP applications.
• Continually identify and proactively manage project risks and issues, ensure execution of corrective action plans up to closure.
• Implement systematic documentation turnover system for all Project Quality related documentation.
• Manage day-to-day activities of the Project walk down teams.
• Plan, prepare, review and execute project system walk down packs to transfer punch items into Master Punch list database (BIM360), approval and issuance of Construction Completion Certificate.
• Provide support and advice on Quality-related issues and resolution of engineering-related disputes.
• Responsible for any other related QAQC matters as requested by management.
• Be seen as the trusted advisor for our customer.

What qualifications will make you successful?

In this role practical experience will carry a high weighting than formal qualifications: -

• Bachelor’s Degree in Engineering or any other related discipline from recognized university.
• Minimum of 5 years of relevant work experience in BMS, HVAC, or Industrial Controls / Automation industry.
• Has an excellent working knowledge of the technical and operational environment in which the project deliverables are created and in which they are used.
• Must be an excellent communicator at all levels both internal and external in the project environment, be proactive and exhibit strong leadership qualities and be able to adapt to a dynamic and geographically disbursed environment.
• Position is to be base at client’s site.
• Able to commit to the full duration of the contract

What's in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee
• Worldwide Employee Stock Ownership
• ...... and more!

Let us learn about you! Apply today.

Our clien is looking a experience analog chip designer engineer, this candidate must have at least 3 year work experience in similar role.

Your job responsiblities are:

-Use simulation tools to predict circuit behavior, identify potential issues.

- Design and develop high performance digital standard cell libraries tailored to meet critcal design specification, performance, power consumption.

- Work closely with layout design team to ensure accurate and efficient implementation of the physical layout of both analog and digital standard cells.

- Competent in PERL, TCL, Python and C++.

- Proficiency in schematic Capture & Simulation ( Cadence Virtuoso, Spectre)

APPLICATION SECURITY ENGINEER RESPONSIBILITY :

• Conduct white box and black box security scan, harden systems and application platform • Develop scripts to automate systems hardening and security vulnerability assessment

• Maintain security test suite in QA build

• Optimize system performance and reliability to enhance user experience.

• Conduct code reviews to ensure code quality and securityWork with Software Quality Engineer on system integration testing

• Work with Software Quality Engineer to manage defect life cycle

• Work with Software Quality Engineer to improve testing processes and tools

• Take on secondary role as an Application Performance Engineer or Software Quality Engineer

• Collaborate with cross-functional teams to enhance security in the development pipeline

EXPERIENCE AND SKILLS NEEDED :

• Min 2 years of experience in application security vulnerability assessment, analysis and remediation

• Experience in agile development environment will be an added advantage

• Experience with continuous integration and continuous delivery, using Gitlab or other similar tools will be an added advantage

• Experience in public cloud providers such as GPC, GCC (i.e. AWS, Azure, Google Cloud) will be an added advantage

• Experience with OWASP ZAP, Burp Suite, SQL Map, Nessus, Nmap, Fortify WebInspect or equivalence will be an added advantage.

• Experience with Checkmarx or equivalence will be an added advantage

• Certified Secure Software Lifecycle Professional (CSSLP), Certified Ethical Hacker (CEH), Certified Information Systems Security Professional (CISSP) or equivalence will be an added advantage

• Experience using Dynamic Application Security Testing (DAST) Tools such as ZAP, Burp Suite, Micro focus WebInspect or equivalence will be an added advantage.

• Experience using Static Application Security Testing (SAST) Tools such as Micro focus Fortify, Checkmarx or equivalence will be an added advantage.

• Security testing-specific certifications such as Offensive Security Certified Professional (OSCP), GIAC Certified Penetration Tester (GPEN), GIAC Web Application Penetration Tester (GWAPT), CREST Registered Penetration Tester (CRT) or equivalence will be an added advantage.

• Risk management-specific certifications such as Certified Secure Software Lifecycle Professional (CSSLP), Certified Information Systems Security Professional (CISSP) or equivalence will be an added advantage

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

Responsibilities

• Responsible for the design and delivery of DeltaV application system on site.
• Participate in the development and implementation of Automation solutions in line with S88 standards for the plant.
• Development Commissioning & Qualification protocols from C&Q Plans
• Creates and maintains applications according to technical design and requirements.
• Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards. Determine the processes and data flow that supports the needs of the project.
• Design & Develop plan for modifications to be made to the system through working with team in development of systems architecture, specifications, controls strategies, sequence of operations through all stages.

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS experience and DeltaV Batch experience required
• Experience in the Designing, Commissioning & Qualifications of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

RESPONSIBILITY

• Assist Product Owner and Business Analyst to craft out user story acceptance criteria • Analyse and decompose complicated software systems, and design a holistic test strategy • Conduct research on emerging technologies and develop test automation framework • Develop test suites of test scenarios and test cases • Take a risk-based approach for test automation • Perform time boxed exploratory testing • Maintain regression test suite in QA nightly build • Actively refine smoke test suite in Development CI environment • Lead system integration testing with other system owners • Manage user acceptance testing • Manage defect life cycle, test artefacts and repository • Drive continuous improvement in agile testing practices and tools • Take on secondary role as an Application Performance Engineer or Application Security Engineer EXPERIENCE AND SKILLS NEEDED • Min 3 years experience in exploratory testing and regression test automation • Strong analytical skills • Meticulous attention to details • Good interpersonal skills such as tactfulness • Good presentation and listening skills • Experience in agile development environment will be an added advantage • Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter) or EggPlant will be an added advantageb • Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage • Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Workplace: Ang Mo Kio

Job Desciption:

• Execute full software development lifecycle
• Develop existing programs by analyzing and identifying areas for modification
• Integrate software components into a fully functional software system
• Develop software verification plans and quality assurance procedures
• Document, write operational documentation and maintain software functionality
• Deploy programs and evaluate feedback
• Comply with project plans
• Maintain and improve existing codebases and peer review code changes
• Provide a detailed level of technical assistance to the customers
• Support customers by responding within the designated SLA
• Investigate and troubleshoot issues, developing solutions for customers while understanding their needs
• Perform impact analysis and coordinate implementation
• Carry out routine maintenance work
• Troubleshoot, debug and upgrade existing systems
• Maintain systems by monitoring and correcting software defects

Requirements:

• Ability to document requirements and specifications
• Proficiency in troubleshooting software issues and debugging a large codebase
• Proficent in Java development

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Title: NLP Research Scientist

Job Responsibilities:

Responsible for leading and driving innovative research and development in the field of NLP technology to address the fundamental challenges and core issues in language models, knowledge representation, machine translation, dialogue systems, and text generation. Achieve high impact through the publication of influential papers and the creation of valuable patents. Proactively explore and identify new applications for these cutting-edge technologies.

Job Qualification

● Possess a strong foundation in deep learning, machine learning, and natural language processing, including a thorough understanding of common models. Capable of selecting appropriate models and devising effective technical solutions for problem-solving purposes.

● Demonstrated outstanding publication records in top-tier international conferences and journals like ICLR, ACL, NeurIPS, EMNLP, TACL, etc. Preference given to individuals with experience in LLMs.

● Proficient in popular deep learning frameworks like PyTorch, with comprehensive knowledge of key deep learning models such as Transformer, BERT, GPT, RNN, LSTM, and their implementations.

● Exceptional organizational and communication skills, self-motivated and capable of handling pressure. Possess a strong enthusiasm for acquiring knowledge and a genuine passion for technology.

Responsibilities:

· Reporting to Managing Director

· Prepare, schedule, coordinate and monitor the assigned project

· Perform overall quality control of the work (budget, claims, schedule, plans, personnel’s performance) and report regularly on project status.

· Ensure that works complies with standards, regulations, and safety guidelines.

· Liaise with Consultant on technical issues & assist in Site inspections and coordination.

· Coordinate the handing over of completed works and completion of the necessary rectification works.

Requirements:

· Degree in Civil Engineering (Recognized Degree by PE Board)

· Proven working experience preferably in civil works

· Decision making ability and leadership skills

· Excellent organizationalband communication skills

· Attention to detail and problem-solving skills

· Proficient in MS Office, AutoCAD and Project management software

· Relevant training and/or certifications

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Job Description

• Industry/Organization Type: Supply of Environmental Systems
• Position Title: Sales & Project Engineer
• Working Location: Boon Lay
• Working Hours: Monday – Friday, 8.45 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,500 + HP Allowance + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and understanding clients’ requirements and assessing equipment needs, preparing and delivering sales proposals, technical presentations.
• Maintain relationships with suppliers and stakeholders.
• Provide continuous after-sales support such as aiding clients to identify problems with installed equipment (if any), recommending improved material, machinery or parts for replacement and maintenance.
• Direct and monitor daily activities to align the project progress and quality goals.
• Implement and adhere to the sales plan set by the manager with the aim of expanding the company’s customer base.
• Collaborate with team to compile information for tender submissions.
• Actively enhance personal knowledge of supplier’s products to introduce technology that adds value to the clients.
• Evaluate sales activities with the management weekly, including the status of prospective customers, plans to meet sales targets and status on deadlines.
• Collaborate with Sales Manager, producing reports regularly to communicate with supplier on sales activities and status of project.

APPLY NOW!!!

• Minimum Diploma in any engineering field.
• Candidates with at least 1 year of Sales experience will be advantageous.
• Candidates without experience are welcome to apply as training will be provided.
• With prior experience with tender systems such as Gebiz
• With Class 3 Driving License.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69796 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Handle tendering processes and engage with clients from oil companies through various communication channels such as meetings, phone calls, and written form tendering clarification.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience in tendering and quotation process.
• Proficient in Microsoft Office, SharePoint, and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Handle tendering processes and engage with clients from oil companies through various communication channels such as meetings, phone calls, and written form tendering clarification.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience in tendering and quotation process.
• Proficient in Microsoft Office, SharePoint, and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114