Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. To carry out RBI inspections as per the codes and standards.
7. Perform QA/QC welding inspections at site.
8. Carry out coating inspections of equipment’s and piping.
9. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
10. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have bachelor or masters degree in mechanical engineering or equivalent.
2. Must have more than 10 years’ work experience.
3. Must have valid API 510, API 570, API 571 and API 580 Certificate.
4. Must have Senior Welding inspector certificate under AWS-SCWI or CSWIP 3.2.2.
5. Must have NACE level 3 or FROSIO level 3 certificate.
6. Must have NDT level II certificates in MPI, PT, UT and RT.
7. Must have previous shutdown inspection experience in Shell Seraya and Neste Singapore.
8. Knowledge in code book like AWS, ASME, API codes.
9. Must have good knowledge in coating inspections.
10. Must have a good knowledge about MT, PT, UT, RT Methods.
11. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

As a Service Engineer, you have to :

• Attend to equipment fault at customers’ premises.
• Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities.
• Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met.
• Ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault.
• To carry out periodic maintenance for our customers.

You should :

• Possess a Diploma in Electronics and/or Electrical Engineering.
• 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc.
• With good interpersonal communication skills.
• Have a valid Class 3 license.
• Be ready for rotating stand-by duty.

Job Description & Requirements

Job Responsibilities :

• Preparation of document for presentations.
• Attending site visit for tendering project and project management.
• Involve in solving construction issues raised by construction teams
• Other duties assigned from time to time.

Job Requirements :

• Degree in Civil / Structural Engineering recognized by BCA and preferably recognizes by Professional Engineering Board, Singapore.
• At least 5 years of relevant experience preferred
• Familiar with AutoCAD, Microsoft word, Excel and Project
• Familiar with latest code of practice as per BCA requirement

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.
• Maintain systems and component capabilities through rigorous testing, track cutting-edge trends, search for ways to improve functionality and efficiency, and implement appropriate segments to keep production methods current
• Prepare comprehensive documentation for all electrical designs, including wiring diagrams and schematics, bills of materials, assembly drawings, design changes, test reports, design-validation plans, and reports ensuring that installations and operations conform to standards and customer requirements

Analyze customer and project requirements, and provide technical guidance and recommendations to project teams and stakeholders

● Develop and implement testing and validation protocols to ensure that electrical systems and equipment meet or exceed industry standards and regulations

● Collaborate with other engineers, project managers, and stakeholders to ensure that projects are completed on time, within budget, and to the highest quality standards

● Stay up-to-date with industry trends, technologies, and best practices in electrical engineering, and recommend new tools and techniques as needed

Basic Information

• 5 Days : 8am - 5.15pm
• Basic up to $4.5k
• Working location at Joo Koon

Job Responsibilities:

• Ensure projects meet internal and client expectations for quality, budget, delivery timelines, and strategy, complying with Workplace Safety and Health (WSH) standards to avoid Liquidated Damages (LD).
• Monitor project cash flow, ensuring timely submission of progressive payment claims and managing budgets, cash flow projections, and cost variance reporting.
• Review and approve WSH documents (e.g., Risk Assessments, Method Statements, Safe Work Procedures, Fall Prevention Plans, Lifting Plans, Safety Management Systems, Permits to Work).
• Ensure all work is executed safely in compliance with approved safety standards.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified**

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Please include your current and expected Salary in your resume.

· Provide technical supports before & after sales

· Sourcing, compiling of costing, preparation of proposals

· Reviewing of sales inquiries, tender specifications, drawings etc.

· Corresponding with supplier and customers

· Prepare/submit quotations/proposals after reviewed & approved

· Handle ordering processing

· Reviewing of purchase orders against drawings, specifications, BOM and/or RFQs

· Diploma in Mechanical/Electrical/Mechatronics with experience preferred

· Higher Nitec/Nitec in Engineering with experience are welcome

· Outspoken personality, able to work independently as well as a team player in pressurized environment

· Transport provided in Boon Lay

· Training will be provided

· Work in customer’s site if requires

· Entry level candidates are welcome

· Both genders may apply

· Estimate Monthly Salary : SGD2,500.00 to SGD3,200.00

Job Descriptions

1. Manage the day-to-day sales activities for the semiconductor manufacturing equipment products (e.g. CMP tool) within the designated sales territory so as to achieve the sales target set by management.
2. Monitor, regulate and direct the activities of the sales representatives to maximize the market opportunities.
3. To make forecasts / targets regularly and to monitor performance of the sales team in relation to these forecasts. Manager is expected to make directions for the team to achieve these sales targets
4. To drive new marketing promotion efforts and to work with EC on the implementing the marketing and promotions efforts for the semiconductor manufacturing equipment products (e.g. CMP tool)
5. To make, develop and manage the localized marketing and sales program for the sales territory.
6. To communicate with the sales team to understand customer demands and offer sales support where necessary.
7. To work with EC to set the industry pricing level.
8. To manage the SAP ERP system for monitoring the progress of quotations, purchase orders, delivery and invoicing of customers.
9. To work closely with EC on the new accounts and new products, using the local team to win new contracts.
10. Establish customer rapport an acceptance
11. Any other duties as assigned by the management

Job Requirements

1. Knowledge of commercial and shipping documents (Incoterms)
2. Knowledge of the semiconductor manufacturing equipment products(e.g. CMP Tools).
3. Diploma/Degree in Engineering or equivalent
4. Good people skills with a pleasant personality.
5. Strong communication, interpersonal and customer service skills.
6. Excellent presentation and negotiation skills.
7. Ability to work independently as well as collaboratively within the team.
8. Must be prepared to travel overseas for training and to our customers’ location in the region as required.

Preferably to have Sales work experience in Japanese company in semiconductor industry for more than 5 years.

(Those without the relevant experience may be appointed as Senior Sales Engineer initially with a view to be upgraded later)

(Those with more years of relevant experience may be appointed to a relevant management position)

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday

. JOB DESCRIPTION

Job Description & Requirements

1. Experience in metal fabrication n installation works

2. Proficent in mechanical engineering drawings n autocad

3. Perform project management n supervise site works

4. Able to coordinate with customer, Vendors n fellow workers to meet project dateline

5. Posses a class 3 licence with driving experience

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

Responsibilities:

• Design of heavy structures made of aluminium alloy
• Liaise with clients, vendors and third parties on technical issues
• Cooperate with project team on the project planning and execution
• Supervise/check the design drawings and material take-off
• Perform structural analysis and prepare structural analysis report

Requirements:

• Degree in structural/marine/naval architecture/civil/ engineering
• Min. 5 years experience in structural design in offshore/marine/civil industry
• Strong technically and competent in structural design and analysis
• Familiar with and experience in international structural design codes, standards and project specifications and structural design software packages
• Experience in aluminium design is not required as training will be provided
• Good written and spoken English
• Come and convince us why you are the best person for the job

Job Description:

- Prepare weekly reports on vehicle repair status.

- Assist in writing meeting minutes to track outstanding issues.

- Conduct team briefings before starting work.

- Coordinate and manage team assignments and vehicle parking allocation.

- Plan and monitor vehicle sequencing and status for operational tasks.

- Provide documentation support to the Operations Leader for work-related needs.

Job Requirements:

- Degree in Engineering (Mechanical, Electrical, Hydraulic, Automotive, Electrical & Electronics, Mechatronics) or a Diploma in a related field with 5 years of relevant industry experience.

- Strong team player.

- Ability to lead a team effectively.

· Customizes CMS database check sheets and allocation of check sheets based on latest engineering drawing revisions and punch list updates for mechanical/ electrical process/safety /HVAC discipline

· Prepares boundary drawings as per subsystem listing

· Prepares procedures/ work method statements and risk assessment for mechanical/electrical process/ safety/ HVAC commissioning activities

· Attends Factory Acceptance Test at vendors' premises, as required. (FAT)

· Leads a team of mechanical electrical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides

· Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability

· Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities

· Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner

· Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities,

· Able to travel oversea

· Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc

· Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures

· Reviews completed commissioning documentation such as check sheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.

· Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

· Ensure to maintain up to date punch close report

Requirements:

· Min. 3 years year of commissioning experience in the Oil & Gas/ marine industry.

· Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc

· Good knowledge and experience in commissioning activities of oil and gas/ marine facilities

· Familiar with permit-to-work systems and lock-out tag-out procedures

· Good analytical, problem solving and planning skills.

· Familiar with Project Specifications, Technical and HSE Standards

· Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

· Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS---(Optional or added advantages)

Working hours：

Monday –Friday: 8:30am – 6:00pm (Transport provided from Jurong East MRT to Office)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

This role supports the Project Manager. It involves the planning and co-ordination of site work. The person in this role needs to be good at communication and obtaining feedback. Instructions must be given to site personnel in a manner that is easy to understand and the person needs to ensure his instructions are understood correctly. This person will also help the Project Manager with any issues that may arise on site.

Job Scope:
1.) Plan and coordinate site work
- Attend meeting with Main Con and work with PM to prepare relevant information i.e. drawings for approval.
- After approval, update Site Personnel of requirements.
- Prepare necessary permits, drawings to get clearance from authorities.
- Co-ordinate with PM, Site Supervisors and Main Contractor.

2.) Attend site meetings
- Ensure approved construction methods are communicated clearly to site personnel.
- Communicate frequently with PM and Site Supervisors.
- Prepare and pass updated drawings to Site Supervisors.
- Go through drawings and permits and explain to site personnel.
- Clarify with PM if unsure.
- Make decision on behalf of PM if there is a need on site.

- Please note that site can be by the roadsides, at substations or in tunnels. There will be some exposure to the elements.

3.) Submit applications for wayleave to relevant authorities.
- Process for application: Road Opening application, NCE, Purchase of Services Plan, Prepare drawing submission
- Monitor and submit site progress reports
- Submit weekly schedules to client
- Submit monthly progress report to PM

4.) Design of SOP

5.) Training of workforce to reach safety goalposts

Requirements:
- Possess certificate "Manage Workplace Safety and Health in Construction Sites (or Construction Safety Course for Project Managers)".

- Required to sign Permit To Work.
- Proven track record with SP group's projects in high voltage power cable installations.

- Candidates with class 3 license and/or their own transport will be viewed favourably.

- Working hours: Monday - Saturday, 8am-5pm

Project Engineer will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. Attend and manage dealing with vendors, designers, classification, and flag statutory on engineering issues

5. Reviewing technical specification and drawings from designer meeting owner, class, and customer requirements

6. To perform any other duties & Responsibilities assigned by superiors from time to time.

7. Ability to demonstrate and implement cost -saving measures.

8. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

- Possess positive working attitude

Key Accountabilities: ​

Sales Engineering and Application Matters

• Provides the design, drawing and documents for the customer’s technical requirements.
• Calculates, verifies, selects the right equipment/suppliers.
• Provides the technical specifications and defines the scope of supply for the equipment.
• Provides and maintains the product and sales engineering information.
• Uses the computerized engineering tools/database, technical library information and factory standards for the engineering work.
• Prepares and carries out technical presentations and training.
• Familiarize oneself with the applicable international and in country technical standards.

Sales Support Matters

• Work closely with sales to define the technical scope of supply.
• Reviews/clarify customer’s specifications & tender documents.
• Provides technical solutions and scope of supply.
• Coordinates with factory and local suppliers for scope of supply.
• Provides total product and project cost calculation.
• Provides technical specs, scope of supply and work with suppliers/contractors to obtain proposals and quote for the equipment timely.

Order Execution

• Raises the necessary purchase requisitions for the scope of supply.
• Manages the order with internal departments, suppliers and contractors till all contractual requirements are fulfilled.
• Verify on the clarification of the order, sales engineering, and drawings/documents.
• Knowledge in SAP tool

Qualifications and Skills:

• University / college studies in Electrical or Mechanical engineering.
• Experience in the diesel/gas engine/generator industry, min. 7 years.
• Hands on experience on engineering, site supervision and commissioning of diesel genset with knowledge of electrical power systems and genset control system
• Knowledge of engineering calculation for and related to genset and electrical systems.
• Review electrical schematics, wiring diagrams, P&ID and system layouts.
• Knowledge and Project execution in the packaging and testing of genset.
• Knowledge in Autocad would be an added advantage.
• Knowledge of switchgear and electrical power protection would be an added advantage.
• Adaptable to different cultures and business practice
• Excellent team player with an open mindset, collaborative spirit and excellent communication skills.
• Proactive and positive attitude.
• Proficient in English language. Fluent in Mandarin would be an added advantage.
• Willingness to travel.

• Total Plant Maintenance (Preventive maintenance & Corrective maintenance)
• Daily operations suport (Including Ah-hoc & CAPEX Projects)
• Shutdown, Pit-stop/Turnaroundworks
• Plant start-up commissioning support
• Computerized maintenance management system
• Condition Monitoring/Reliability Engineering
• Identifying project goals and scope
• Planning and documenting project tasks
• Ensuring deliverables are delivered on-time
• Managing all project resources
• Effectively communicating with stakeholders
• Eliminating blockers and potential risks
• Documenting projects process using various project management tools
• Ensuring top-quality results and project success

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

Job Requirement

• Degree in Civil Engineering or equivalent
• At least 6 years of working experience in the related field is required
• Having experiences in LTA Project would be bonus and advantageous
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• Willing to work in site office

- Proposed CAAS Extension of ATCC

Requirements

- At least 5 years of supervisory experience in supervision of Civil/Structural works, RC & steel works.

- Experience in supervision of medium to large scale building works, piling works, temporary works, Ground Building Works (GBW) for Government Institutional projects.

- To provide full supervision works to ensure works are carried out in accordance to approved plans under Building Control Act.

- Assist QP to keep and maintain site records.

- Job site is at Sealand Road, Changi Area, must be willing to travel and work at that area

- Able to lead a team of site staffs.

- Possess Degree in Civil Engineering recognized by PEB and registered with IES as Resident Engineer

Interested applicants to reply to:

[email protected]

Quote: SG510

Submit resume with photo including current and expected salary and contact no.

Job Description & Requirements

• Working hour: 9am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Descriptions

• Build and install offshore generator/fire pump systems;
• Onsite planning and managing of installation teams, sub-cons;
• Supporting assistant to project manager and ad-hoc;
• Project Management, including effective cost, time and quality control, manpower planning, Material Take Off & etc
• Overall project schedule and expertise to meet project objectives and deliverables;
• Involve in negotiation with subcontractors and suppliers with commercial personnel where necessary;
• Liaise with clients and consultants on project requirements and attending meetings;
• Complete assigned projects on schedule and within budget;
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks;
• Prepares for engagement reviews and quality assurance procedures;
• Ensure that Health, Safety and Environmental Safety standards are met;
• Supervision of project engineers and other project team members;
• Ensure smooth delivery of the project completion/site commissioning

Requirements:

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechatronics), Engineering (Mechanical), Engineering (Electrical/Electronic) or equivalent.
• Minimum 5 years as Project Engineer in oil & gas industry, Energy industry and must have experience in M&E
• Completed medium sized projects from start to finish
• Previous project experience in relevant fields e.g. offshore projects, marine projects etc.
• Commercial knowledge
• Offshore general Safety Course for Project Manager
• Managing Work at Height Course
• Workplace Safety and Health Risk Management Course
• Possess high level of integrity, good interpersonal and strong leadership skills.
• Good communication skill
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative, and passionate about energy generation
• Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Passionate candidates having a sufficient knowledge and exposure in electroplating processes & the laboratory activities, are requested to submit their resume. Having a minimum 1 year of experience is prefereable for the post. Only the locals and the Permanent Residents are invited to apply for the post.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome

Job Description

• Liaise with clients to identify and define project requirements
• Coordinate between authorities, management and relevant stakeholders on project implementation
• Liaise/ negotiate with suppliers and sub-contractors
• Carry out sit surveys and submitting proposal for cabling works, project planning, etc.
• Develop or update project plans including information such as objectives, technologies, schedules, costing, and staffing
• Monitor and manage project milestones and deliverables
• Inspection of inventory to ensure working conditions of machines and equipment
• Monitor store inventory, carry out stock take and ensure quality control of project materials
• Ensure project claims are carried out in a timely manner and projects are closed successfully
• Report project status, such as budget, resources, technical issues, customer satisfaction, etc.
• Utilize industry best practice, techniques, and standards throughout the project execution

Requirements

• At least 3 years of experience in telecommunication/ fiber related fields (OSP & ISP)
• Possess at least a diploma in any engineering field
• Possesses a Class 3 driving license
• Able to commit to a 5.5-day work week

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits