Responsibilities

• Work as Senior Tankage Design Engineers to execute the Tankage Design Engineering of

the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650,

Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII &

Cryogenic Double Wall Tanks as per API 620 & API 625.

• Preparation, Review & Checking of Tankage Design Documents such as Design Calculation

for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification,

Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME

Sec VIII, AP 2000 and all Applicable Codes & Standards.

• Prepare all Tankage documents in accordance with project specification. Maintain Design

integrity and quality within the Project Engineering Team

• Preparing Engineering schedule and Engineering man hours estimation to meet project

requirements.

• Coordination with PMC and Construction Coordination.

• Participates in discipline and inter-discipline design check and screening meetings for

compatibility, completeness and correctness in works.

• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

• Preparation of Technical Specification for Works and Technical Bid Evaluation

• Technical assistance to construction activities and attending to Site Queries.

• Preparation of Foundation Loading Data.

• Generate 2D construction drawings and data sheet.

• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system,

aluminium dome roof & etc. Preparing technical bid evaluation for item purchased.

Checking vendor’s calculation & construction drawings.

• Checking of construction drawings. Preparation of bill of material for purchasing.

• Preparation of technical queries to client base on design deviation.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE

in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce

HSE hazards, aspects and risks.

• Any additional Adhoc related work

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Min. 10 years’ experience in oil and gas.

Software Requirements

• Autocad

• Good proficiency in MS Excel , MS word

Code Knowledge

• API 650/ API 620

• ASME Section VIII D1 & D2

• ASME Section II Part A & D

• ASTM

• NFPA

Responsibilities:

• Design of hydraulic schematics
• Sourcing and sizing of components
• Modelling and drafting using CAD software
• Generate the EBOM and prepare design documents
• Integrate and testing of hydro-pneumatics system

Requirements:

• Keen interest in Mobile System Hydraulics and Pneumatics engineering and technology
• Must be competent with CAD Software such as Unigraphics and SolidWorks
• Knowledge in drafting, geometric dimensioning & tolerancing (GD&T) preferred
• Able to read and interpret fabrication/ mechanical/ assembly drawings
• Able to read and interpret electrical/ hydraulics/ pneumatic schematics
• Strong analytical skills is a plus
• Possessing a valid class 3 license is a plus
• Able to work independently and effectively with peers, resourceful and keen to learn
• Must be a team player with good communication skills
• Willing to perform hands-on work in the workshop/on the vehicle

Brief Summary

• Basic $4000 + AWS + VB + Medical benefits
• 5 Days : 8.30am-5.30pm
• Working Location @ West
• AL 14 Days, Birthday Leave, Annual health check-up, Customized Gift for holiday season
• Required to attend a 2-week training session in Shanghai HQ
• New Headcounts

Responsibilities

• Assembly, testing, and maintenance of mechanical, electronic, or automated equipment.
• Adhere to operational protocols to ensure quality control and proper functionality of equipment.
• Collaborate with engineers to diagnose malfunctions and enhance system performance.
• Assist in documenting testing procedures and results.
• Maintain a safe and organized work environment, complying with workplace safety standards.
• Conduct wafer testing on the wafer platform according to the schedule.
• Perform die testing on the die platform as scheduled.
• Execute die sorting on the sorting platform based on the timeline provided.
• Uphold and manage 6S standards within the Fab environment.

Requirements:

• Min 1 year relevant experience
• Proficiency in handling mechanical, electronic, or automated equipment.
• Singaporean only

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**

EA Reg. No: R1988238

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Descritption:

• After market sales related promotion to existing customers in Singapore
• Regular " patrol " activity as pro-active maintenance promotion.
• Patrol / Check machine condition / Report / Service proposal w quotation & manage prospectives / secure order / execute maitenance job by team
• Troubleshooting / proper report and action order to the team.
• Compressor system improvement proposals
• Energy saving proposal with existing system diagnosis

Job Requirement

• Minimum 3 year experience in aftersales service
• Experience in handling compressor/Valve/Pump
• Minimum diploma in Mechanical engineering

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are looking for an Assistant Principal Engineer to join our ILS O&S Team. In this position, you will be responsible for in-service vehicle matters, item obsolescence and vehicle upgrading proposal. You will work closely with the Design and O&S team as well as the End Users in order to maintain the availability of the in-service vehicles.

Job Responsibilities:

• Meet up of End Users to understand their issues and matters on hand.
• Work with different departments, local vendors, overseas OEMS to submit design/pricing proposal.
• Monitor progress of outstanding issues and/or submitted proposals.
• Monitor allocated budget for the given year.

Job Requirements

• Degree in Mechanical Engineering.
• Knowledge and/or experience in mechanical design. Proposal writing and budgeting experience will be an advantage
• Self-motivated and able to work systematically
• Team player with good communication and presentation skill
• Singaporeans only

Job Summary:

We are seeking organised and technically skilled individual to serve as System Engineer. This role will be responsible for implementing, testing and integrating of system. The candidate should have strong technical background and ability to communicate effectively with technical and non-technical teams.

Job Responsibilities:

• Implement and integrate system to meet customer requirements

• To resolve issues on-site

• Perform system testing, integration, troubleshooting and validation.

• Prepare documentation for System Design Document, Installation Control Document, Acceptance Test Plan and User Manual to facilitate training and support.

Qualifications:

• Prior experiences in System Implementation of Radio Communication, Public Addressing System (PA), PABX, Charger System and Battery Monitoring System.

• Strong understanding of System Design

• Good analytical, problem-solving, communication, problem-solving skills and teamwork abilities.

• Prior working experience with MINDEF and/or MHA customer is an advantage

Key Competencies:

• Proficient in MS office and Visio

• Good problem-solving abilities and attention to detail

• Team player with pleasant personality

• Strong interpersonal skills

Responsibilities/Requirements:-

• Resourceful, knowledgeable in solar energy market and aware of related events and news in exploring business opportunities
• Prepare and deliver presentations explaining technical products on Solar/EV/BESS to existing and prospective customers
• Liaise with customers, the sales & technical teams, to determine product needs and system requirements
• Provide customers with product sales support
• Build up and nurture good networking in related industries
• Screen and identify potential partners
• Drafting, review and proven ability to negotiate contracts
• Possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical or Electrical Power or Clean Energy) or equivalent
• At least 3 Years of working experience in the related field is required
• Experience in Clean Energy, Sustainable Energy, Solar Energy
• Good interpersonal, communication & presentation skills
• IT Savvy
• Possess own vehicle

Responsibilities/Requirements:-

• Resourceful, knowledgeable in solar energy market and aware of related events and news in exploring business opportunities
• Prepare and deliver presentations explaining technical products on Solar/EV/BESS to existing and prospective customers
• Liaise with customers, the sales & technical teams, to determine product needs and system requirements
• Provide customers with product sales support
• Build up and nurture good networking in related industries
• Screen and identify potential partners
• Drafting, review and proven ability to negotiate contracts
• Possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical or Electrical Power or Clean Energy) or equivalent
• At least 5 Years of working experience in the related field is required
• Experience in Clean Energy, Sustainable Energy, Solar Energy
• Good interpersonal, communication & presentation skills
• IT Savvy
• Possess own vehicle

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

Safety

• Engineer must adhere to all the HSE principles and WI during the work.

Quality

• Remember all WI, SOP, and Quality Policy. Work with related internal departments (such as Production, Equipment, Quality, Technology) and external CM suppliers to resolves wafer blocks/cells/modules quality issues and implement required decisions made by internal management at the external supplier sites.
• Ensure no quality issues during qualification/certification and proper change management implementation phase.

Delivery

• Possess excellent project management skills by establishing schedules, coordinating with required resources both within the organization or CM suppliers, projecting cost of qualifications/certification projects and risks identification to implement and execute the required projects. Responsible to generate bill of materials (BOMs) and Design/Engineering change, product transfer to internal/external lines and lead in DFMEA/PFMEA for product change.
• Ability to create and maintain excellent internal/external customer supplier relationship through excellent interpersonal and communication skills.
• The Key Performance indicators are the results and prompt project schedule control.

Cost

• Initiate and lead cost-reduction projects relating to cost reduction.
• These types of projects will relate to man, method, machine, and materials.
• In cases where projects are not initiated, participation towards such project will also be required.
• The Key Performance Indicator is CM product performance in addition to the CM product pricing.

Continuous Improvement

• Initiate and lead projects relating to cell efficiency and module power improvement activities.
• To run and execute projects base on RPDM process flow.
• Engineer will have the chance to research on new processes and materials at the suppliers site to be implemented into our internal production environment.

Others

• Perform other duties as assigned. Duties will vary according to the degree of difficulties and involvement of the specific targets set in the department.
• Develop and maintain proper job methods, work instructions and change management.
• Regular reporting of project status.
• Lead trouble-shooting and root cause analysis efforts to resolve issues.

• Degree in Electrical/Electronics/Mechanical/ Materials Engineering.
• Working experience in Solar/Semiconductors/Electronics manufacturing industries will be an advantage.
• Knowledge in Semiconductor/Solar cell and module processes.
• Knowledge in FMEA, DFMEA, DOE, Fish-Bone Analysis.
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and data-mining.
• Ability to work under stress in a fast paced environment with self motivation.
• Strong organization and project management skills.
• Ability to communicate effectively with all levels (PS to Management) within the organization.
• Ability to write and speak in English and one other language, preferably Mandarin for liasion with Taiwanese and China suppliers/customers.
• Dynamic & committed with proactive working attitude.
• Ability to initiate without being asked.
• Challenging spirit to improve current conditions.
• Highly effective personal skills communication and organization.
• Good Team player.

Additional Advantageous Skills

• Ability to perform software simulations using SPICE or MATLAB.
• Electrical characterization and physical characterization/ Failure Analysis tools for systematic troubleshooting and improvement.
• Characterization tools/technique competency preferred include: IQE tester, Spectrophotometer, Ellipsometer, Semilab WT-2000, Sinton WCT-1200, Corescan, Photoluminescence Technique and Electroluminescence Technique.

Objectives of the position:

This role involves Customer Quality Support for LAP’s product distribution, addressing customer feedback and product quality requirements/issues. The person in this position will be responsible for handling customer feedback or requirements, such as complaints, test data, and other technical information as requested. This includes necessary communication with all stakeholders (Customer, Supplier, Customer Service, Production Planning, Supplier Management, Logistics).

Knowledge in cable testing or Electrical & Electronic (E&E) product testing, along with an understanding of technical specifications, will be required to comprehend customer complaints (both technical and logistical) and provide appropriate advice for resolution.

Key Responsibilities:

Manage Customer Complaint Processes

• Acknowledge the complaint
• Update the complaint in SAP & Customer complaint log
• Track the complaint & close the complaint once actions are completed
• Summarize complaints for monthly reporting (LOS & Q-reporting)
• Properly handle customers' needs by providing accurate and timely information on inquiries related to cable standards, test reports and complaint handling

Track Supplier Quality

• Conduct incoming inspections when required or prompted by customer complaints
• Update results in the SAP system and release inspected lots according to the defined usage decision
• Generate Supplier Corrective Action Requests (CAR) and track corrective actions by liaising with the supplier

Compliance with Standards

• Familiarize with and comply with international cable testing standards and procedures
• Contribute to achieving company and department KPIs through due diligence, duty of care, and personal accountability for quality assurance in all tasks

Liase with Stakeholders

• Effectively close customer complaints by liaising with relevant stakeholders

Maintain Records

• Maintain records in SAP and other relevant records

Operate Laboratory Test Equipment

• Operate laboratory test equipment when required for the validation of complaints

Assist with Customer Technical Enquiries

• Assist with product test reports, RoHS, REACH, and CE inquiries

General Assistance

• Assist in other day-to-day activities related to the QA department as assigned by your superior

Skills & Qualification:

• Min. Diploma in Engineering (Electronics / Electrical) or equivalent
• Min. 1 year of experience in electrical / electronic product testing and qualification
• Knowledge in ISO 9001: 2015 QMS standard will be added advantage
• To be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).
• Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage
• Good written and communication skills in English
• Good customer handling skills and able to communicate to all levels in the organization
• Proficient in Microsoft Words, Excel & Power point
• Addresses present issues immediately and independently
• Possess self-confident and willing to share opinions and expertise in discussions
• Anticipate potential problems and takes action to avoid crisis
• Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Your Job

Part of the New Product Development team, you will collaborate with cross-functional teams, including design, manufacturing, and supply chain, to mitigate risks, drive improvements, and ensure compliance with internal and external quality standards to ensure the flawless introduction of products into the market.

Our Team

Molex creates connections for life by enabling technologies that transform the future and improve lives. You will be in our Datacom and Specialty Solutions (DSS) division, which designs and manufactures an extensive product line serving customers in telecommunications, datacom, (hyperscale) data center, cloud, and storage applications.

What You Will Do

• Collaborate with cross-functional teams to facilitate risk assessment and mitigation activities during design, prototype and manufacturing phases of new product development.
• Develop and implement comprehensive quality plans that is focused on the voice of customers and adhere to required internal and external standards to achieve new product qualification.
• Support supplier quality assessments and collaborate with suppliers to achieve qualification on new products.
• Lead or facilitate problem solving and resolution of quality issues during launch, and support efforts to prevent future occurrences.
• Champion continuous improvement and lean initiatives to improve new product development and advanced product quality planning.

Who You Are (Basic Qualifications)

• Experience in new product introduction - product and process development and qualification
• Experience in quality management and advance product quality planning
• Strong interpersonal skills
• Strong analytical and critical thinking abilities

What Will Put You Ahead

• Degree in Engineering or related field
• Working knowledge of electronic assembly, testing, molding, stamping, plating and assembly processes
• Strong leadership abilities

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

Part of the New Product Development team, you will collaborate with cross-functional teams, including design, manufacturing, and supply chain, to mitigate risks, drive improvements, and ensure compliance with internal and external quality standards to ensure the flawless introduction of products into the market.

Our Team

Molex creates connections for life by enabling technologies that transform the future and improve lives. You will be in our Datacom and Specialty Solutions (DSS) division, which designs and manufactures an extensive product line serving customers in telecommunications, datacom, (hyperscale) data center, cloud, and storage applications.

What You Will Do

• Collaborate with cross-functional teams to facilitate risk assessment and mitigation activities during design, prototype and manufacturing phases of new product development.
• Develop and implement comprehensive quality plans that is focused on the voice of customers and adhere to required internal and external standards to achieve new product qualification.
• Support supplier quality assessments and collaborate with suppliers to achieve qualification on new products.
• Lead or facilitate problem solving and resolution of quality issues during launch, and support efforts to prevent future occurrences.
• Champion continuous improvement and lean initiatives to improve new product development and advanced product quality planning.

Who You Are (Basic Qualifications)

• Experience in new product introduction - product and process development and qualification
• Experience in quality management and advance product quality planning
• Strong interpersonal skills
• Strong analytical and critical thinking abilities

What Will Put You Ahead

• Degree in Engineering or related field
• Working knowledge of electronic assembly, testing, molding, stamping, plating and assembly processes
• Strong leadership abilities

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Working hour: 8:30am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Scope

· Designing, manufacturing, and installing components that fulfil requirements.

· Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement) （Preferably IN MARINE&OFFSHORE&MANUFACTURING INDUSTRY）

· Analyzing problems or deficiencies and developing solutions to resolve them.

· Conducting experiments and evaluations to improve and innovate product designs.

· Creating plans and designs using CAD technology.

· Evaluates final product’s overall performance, reliability and safety.

· Estimating budgets and time scopes for each project.

· Writing technical documentation for machine operators.

· Ensuring that products meet compliance regulations.

· Collaborating with project managers and other engineers in our team.

· Liaison with vendors on finalization of modules.

· Responsible for mechanical documentation.

Requirement

· Degree in Mechanical / Mechatronics Engineering or related disciplines with 3years’ experience.

· Diploma in Mechanical / Mechatronics Engineering or related disciplines with 5 years’ experience.

Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Element has an opportunity for a Sales Engineer. In this role you will be an inside seller, responsible for establishing and maintaining strong relationships with a defined group of Element clients and prospects.

You will expand business with dormant and existing accounts, provide increased touch points for accounts, and is budget responsible for 200+ growth and retention clients. It will be your responsibility to assure customer satisfaction through all stages of the sales process. In addition to client relations, this role will interact with the broader Element Sales Team, General Manager, and lab/technical personnel. The ideal candidate will be action oriented, customer focused and have an entrepreneurial drive.

Job Duties:

• Establish and proactively maintain a strong professional relationship with key decision makers and influencers within assigned accounts
• Identify current and future customer service requirements by establishing personal rapport with potential and actual customers, acting as a liaison between the customers and Element
• Identify opportunities early in the sales cycle to ensure maximum share of wallet for Element
• Qualify opportunities with assistance of inbound team / specialists
• Manage relationships and utilize technical support to assist in Sales
• Follow up in a timely manner on quotations for the assigned customer base
• Actively utilize CRM to record activities, ensuring contact details are accurate, duplicates are removed, new information is added and accurate call / visit logs are entered
• Actively participate in regular pipeline reviews, ensuring all CRM records are up to date and critical success factors are identified for key opportunities
• Achieve sales goals by converting and penetrating accounts
• Build and maintain a working knowledge of Element’s service offerings; participate in training/coaching opportunities
• Ensure compliance with all Element policies including but not limited to terms and conditions, trade compliance, treatment of others, moral code of conduct, and employee handbook
• Ensure adherence to all applicable laws pertaining to safety, environment and corporate governance

Job Requirements:

• Approximately 3 years of Business Development, Sales or Account Management experience
• Ability to read and interpret documents such as customer quotes / contracts, marketing materials, and customer testing specifications
• Ability to write routine reports and correspondence and speak effectively before groups of customers or employees of organization
• Ability to calculate figures and amounts such as discounts, interest, commissions and proportions and apply concepts of basic algebra and geometry
• Ability to solve practical customer problems and interpret a variety of instructions, data and details furnished in written, oral, diagram, or schedule form
• A valid driver’s licence, with an acceptable driving record under Element’s policy
• Experience in interpreting testing procedures and requirements desired
• Proficiency in Microsoft Applications (Word, Excel)
• Availability, flexibility, and maturity to represent the company at a broad range of events / projects in the community, with customers and within the company
• Ability to remain calm when faced with mounting pressure related to deadlines and multiple priorities
• Well-developed oral and written communication skills to meet a variety of communication needs
• Good interpersonal skills that foster open upward and downward communication built on mutual respect
• Ability to interface with clients, win new work and determine their requirements; helps develops proposals including cost estimates, work plan and terms and conditions
• Some overnight travel may be required

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Engineer to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

Job Duties:

• Perform source emission sampling work at sites and quality check on instrument prior to site deployment
• Lead sampling team in conducting tests
• Able to work under the dun in client's process areas
• Data entry using site information to generate test reports
• Assist Principal Engineer in method development

Job Requirements:

• Degree in Environmental or Chemical Engineering
• Physically fit and required to work at height
• Candidates with experience in Indoor Air Quality Testing, Microbiology Testing and Source Emission Testing will have an added advantage
• Possess valid Class 3 Driving Licence and have excellent interpersonal and communication skills
• A team player who is able to multitask

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

Design /drafting of various Electrical layouts and schematics using solid work electrical software as directed by PD/AE and/or as per the requirement of the assigned job.

· 3D modeling of electrical components, equipment and other related items as per the requirement of project.

· Provide the technical support to site Engineer.

· Creating Draft of Electrical Single Line / Panel Diagram according to customer technical specification.

· Maintain, update and rectify drawings as needed and ensure its accuracy and completeness.

· Respond promptly to inquiries and requests relating to the drawings.

· Helps PD/AE in resolving interferences/clash reports.

Requirements:

· Diploma in Electrical Engineering or equivalent.

· Good working knowledge of mechanical/electrical aspect of generator system and control panels.

· Experience in internal/ Client model review.

· Working experience of drawing software like solidworks electrical and draftsight.

· Able to read and understand site layout drawings and general arrangement drawing of genset.

· Fresh graduates are welcome to apply.

** 0830am -1800pm

** 5-day work weekly

** Two ways of shuttle bus service provided at Jurong East MRT

Only for PR and Singaporean.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR department. We regret that only suitable candidate will be notified.

Job Duties:

• Maintain 5S & Safety in Laboratory, plan and deliver services to meet the local and regional business plan objectives
• Technical report preparation and authorization and provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Provide onsite project leadership and testing execution while ensuring development and training of junior staff
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing, possess the ability to oversee standard and/or routine technical problem solving activities and able to interact with customers on technical issues and questions
• Provide Input and support on business development opportunities with new or existing customers and be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory
• Carry out crucial examination and implementation of testing concepts and data, utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions
• Ensure that tests assigned to the technicians are performed in a timely manner in accordance with validated test protocols and procedures; give training to the technicians as required, upkeep test reports and related records and ensure equipment and testing meets the requirement of ISO/IEC 17025
• Maintain and upkeep test facilities and laboratory equipment, assist with hazard identification and risk assessment exercises within their areas of responsibility and monitor day-to-day health and safety in their section of responsibility and ensure all hazards, near misses and accidents are reported

Job Requirements:

• Working knowledge of laboratory safety
• Possess a Degree in Civil Engineering or Materials Engineering major or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic / professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description

> Performing electrical engineering work in analysis, design, development, running simulations, prototyping hardware, evaluation, planning, testing and operations;

> working with the end customer and/or systems engineers to gather requirements and convert them to engineering specifications;

> trouble shooting and repair the system hardware and software during real-time collection operations.

> On site electrical research, construction audits, field reviews

> Writing detailed and concise technical reports, feasibility studies, proposals, including written responses and instructions as required during all project phases

> Conducting all tasks in cooperation with internal clients and other engineering disciplines

> Managing and enhancing client relationships

> Maintain proper project documentation of the electrical work performed Job

> Other assigned tasks as requested

Job Requirements

> Minimum Diploma/ Degree in Electrical Engineering/Electronics/Automation Control or equivalent

> Responsible and committed.

> Good problem solving and troubleshooting knowledge using systematic approach

> Knowledge of AutoCAD software or electrical equivalent will be an advantage

> Ability to design electrical circuit and perform electrical calculations

> Knowledge and experience on wiring will be an advantage

>Self-motivated, highly resourceful and organized