Job Description & Requirements

Responsibilities:

· Understanding process requirements from Technical Spec & P&ID.

· Interaction with customer for getting inputs for designing and Development of Control System.

· Preparing the flow chart, FDS / FCD, system configuration, P&ID for Instrumentation and verifying the electrical drawing.

· Developing the PLC programming, HMI / SCADA Designing as off-site development and onsite commissioning.

· Field wiring and commissioning the instrumentation such as transmitters, switches, valves and motors.

· Conducting Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and related document preparation.

· Commissioning & troubleshooting for new & existing systems & Interaction with customer for Commissioning execution.

· Involve in the installation of new Equipment’s during plant expansion.

· Carry out Equipment improvements projects and modifications.

· Manage Projects including Testing and commissioning, on site installation, repair, maintenance and test tasks.

· PLC Programming of Life Safety Systems configurations.

· Diagnose errors or technical problems and determine proper solutions.

· Produce timely and detailed reports.

· Installing small additions and changes to existing systems.

· Follow all company’s filed procedures and protocols.

Requirements:

· At least 5 years of hands-on experience in PLC & SCADA developments and Maintenance

· Hands-on experience in Siemens S7-400 CPU, Mitsubishi, Proface, Panasonic, Allen Bradley PLC’s and redundant system configuration

· Hands on experience in Wonderware ArchestrA SCADA system, WINCC and TIA Portal

· Familiar with Automation and Control engineering

· Proficiency in Profibus communication and troubleshooting

· Bachelor’s Degree in Electrical / Electronic Engineering or above

· Knowledge of MS Office

· Basic knowledge in Mechanics, Pneumatics and Hydraulics.

· Strong personality with a hands-on attitude.

· Ability to work rotating shift and perform overtime on weekdays & weekends.

· On call support during and after office hours.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Experience in Marine related trade. Working location Tuas, shipyard and and Anchorage Must committed overtime,expecially on weekends and holidays.

We need for turbine, pump and engine Service Engineer with min 10 years experience.Work within the project delivery teams to engineer physical layout and system. installation works and highlighting of any apparent technical, functional or compatibility issues with the design package while highlighting any deviation to client’s standards.

Manage all on site trades both external and internal ensuring. completed on time to enable the project to be delivered successfully as planned for the clients.Communicate effectively while on and off-site with clients, client project teams.Discuss project details, requirements, identified problems, clarify updates, identify, and explain clear solutions and testing and troubleshooting.Follow assigned projects to final adjustments, test, troubleshoot and rectify as part of the commissioning and signoff process.Communicate progress on jobs and provide regular status reports to the Project Manager.

Attend site meetings as required, representing the company. Ensure prompt completion of personal timesheets, expenses, project tracker reports and any associated paperwork. completed shipyard safety supervisor course.

Responsibilities:

• Able to manage BMS and ELV projects independently

• Responsible for site activities, coordination and supervision works

• Ensure timely completion of all projects

• Monitor / review operational costs and responsible for financial performance of projects

• Responsible for project management including attending meetings, coordination and supervision works

• Liaise with consultants, architects, and contractors and handle all technical matters

Requirements:

• Degree / Diploma in Electrical and Electronics Engineering

• Minimum 2 – 5 years relevant working experience in BMS or ELV

Other info:

· Company specializes in integrated automated systems

· Salary $3000 - $5500

(Interested candidates, pls apply with resume in MS Word format)

You may email to [email protected]

EA License No: 17C8809

EA Reg No: R1108561

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Responsibilities

• Assist Project Manager in project management, survey, managing site works, construction activities, monitor work schedules, update progress, planning and implementation in accordance to master work plan and scope of work within project budget.

• Provide guidance and supervision to contractors/ in-¬house workers in relation to Electrical/ Structured cabling works in accordance to proposal for site build for cabling infrastructure, installation quality, and adherence to site work safety requirements and to resolve technical issues.

• Prepare project submissions, tenders, system designs, installation drawing & coordination of all technical activities on assigned projects

• Participate in project meetings and resolving project issues

Requirements

• Candidates should possess at least a Nitec/Diploma in Electrical/ Engineering or its equivalent.

• At least 1-¬3 years Project Management and hands on working experience in Electrical and/or Structured Cabling.

• Able to read/write and speak English is a must.

• Able to work independently and/or work together in a team when needed.

• Able to multi¬task

• Have a strong sense of leadership, customer oriented and problem solving skills

• Proficient in Microsoft Office

About the Opportunity

The IT Engineer provides support to employees experiencing technical problems and performs troubleshooting, problem diagnosis, resolution, and escalations. In-depth knowledge and hands-on experience with system and server administration and virtualization experiences are required. Area of expertise for this position includes Microsoft technologies, VMware virtualization, Citrix VDI, Linux and storage. Prior experience supporting L1 and L2 requests in IT would be helpful for this position.

Job Responsibilities:

• Primary responsibilities will include overseeing and executing system-based projects, writing scripts to automate manual processes, and creating system documentation & diagrams. Provide system administration and configuration of specialized mission applications and software.
• Strategic Infrastructure Management: Global Administration, maintenance, and support of the Server environment and VDI infrastructure, ensuring optimal performance and scalability to meet the evolving needs of the organization as the need arise.
• Incident Resolution and Technical Escalations: Act as a point of escalation for complex technical issues, leveraging your advanced troubleshooting skills to swiftly diagnose and resolve incidents, minimizing impact on business operations.
• Advanced Problem Analysis and Resolution: Conduct in-depth analysis of system problems, particularly those related to hardware, software applications, and operating system servers, employing sophisticated diagnostic techniques to implement effective solutions.
• Comprehensive Documentation and Knowledge Management: Develop and maintain comprehensive documentation, including automation scripts and procedures, to streamline troubleshooting processes, enhance team collaboration, and ensure continuity of operations.
• Root Cause Analysis and Problem Management: Lead root cause analysis efforts for critical problems and major incidents, identifying underlying issues and implementing preventive measures to mitigate future occurrences, thereby safeguarding business continuity.
• Proactive Performance Monitoring and Security Compliance: Utilize advanced monitoring tools and command-line interface utilities to continuously assess server performance, identify potential vulnerabilities, and ensure adherence to stringent security standards.
• Change Management and Risk Mitigation: Spearhead the planning, coordinating, and executing system software upgrades, patches, and firmware updates, meticulously evaluating risks and impacts to minimize disruptions and maintain system integrity.
• Effective Communication and Stakeholder Engagement: Interface with IT management, end-users, and departmental teams to communicate feedback, share insights, and champion initiatives aimed at enhancing operational excellence and delivering exceptional service quality.
• Follows SOP: Support procedures and provides troubleshooting guideline and cause analysis for technical issues

Job Requirements

• BS degree or equivalent experience.
• 8 + years of advanced experience as a IT Administrator or Engineer with hands on experience in servers, virtualization and storage.
• Active Directory (AD) & Domain Controller Administration including DNS and GPO management in a multi-site environment.
• Building and administering Windows\Linux servers and accompanying infrastructure, maintaining capacity and performance in enterprise environment.
• Candidates must possess experience with both Windows and Linux mixed environments.
• Experience with Infrastructure – virtual environment, VDi, Citrix Netscalar, Backup& Restore, disaster recovery and business continuity
• Hardware: Dell MX7000 Chassis and MX700 series blade configuration, PowerEdge rack servers
• Storage: NFS and ISCSI storage concepts. Cronjobs and rSync functionality
• Networking: TCP/IP, VLAN, DNS, Load Balancing and security concepts
• Virtualization: VMware 7 and above and Citrix Storefront
• Transferable Skills: Communication, ability to work with a diversity of people, ability to plan and organize, time management, analytical problem solving, Project Management, & customer service skills.
• Strong communication and collaboration skills
• Ability to work independently and as part of a team.
• Willingness to learn and adapt to new technologies and processes.
• Ability to multi-task in a fast-paced IT environment with fluctuating priorities and deadlines.
• Ability to interface and work with varied positions and levels of technical knowledge both within the department and with other departments in the company.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Identify, propose and evaluate new business opportunities for business growth, with respect to the sale/purchase of refining products including procurement of intermediate components for value-added feedstock/blending entities, and third-party service collaboration.
• Coordinate with internal and external stakeholders to establish operating, commercial and accounting procedures for managing third-party contracts and agreements.
• Oversee day-to-day refinery performance and ensure stakeholders adherence to contractual quantity and obligations. Liaise and collaborate with stakeholders to resolve issues and concerns.
• Work closely with internal stakeholders to support the needs of refinery feedstock demand and supply of products, to achieve optimal refinery operation.

• Degree in Chemical Engineering

• At least 2 years' relevant experience in oil refinery/petrochemical.
• Experience in process/development engineering or commercial work knowledge will be advantageous

SUMMARY:

Responsible for the safe, reliable and cost effective maintenance and repair of the fleet and facilities by effectively planning and managing the workshop resources to maximise efficiency and productivity, in the process ensuring that scheduled work is completed on time and within budget, making due allowance for effectively dealing with the unscheduled work that arises during the course of daily operations. In meeting this prime objective, full compliance with all Company policies and procedures are mandatory with particular reference to health, safety and environmental legislation.

PRINCIPAL RESPONSIBILITIES AND AUTHORITIES:

• Responsible for running and updating the vehicle inspection, servicing and MOT plans on the computerised fleet management system.
• Responsible for allocating the details of the repeat and breakdown defects to the relevant Engineering Supervisor and ensuring that adequate remedial action is taken.
• Responsible for ensuring that all vehicle records are kept up to date and comply with all company policies, procedures and legislation.
• Identify and establish reasons for poor vehicle component performance, formally reporting such incidences to the Fleet Maintenance Manager with the full facts and implications.
• To manage and motivate the engineering team to achieve good standards of performance, level of commitment, awareness and motivation. Identify training and development needs and arrange appropriate training. Encourage staff to share their skills and knowledge.
• To develop and foster a culture of continuous improvement and problem solving amongst the engineering staff. In conjunction with technical personnel, strive for high levels of diagnostic skills to be attained.
• Undertake the delivery of regular tool box talks and team briefings to the engineering workforce documenting all such occasions and the attendees.
• Responsible for planning and controlling the engineering staff holidays and cover arrangements to ensure there are at all times sufficient levels of resource available on all shifts to meet the operational business requirements.
• Responsible for ensuring that adequate numbers of Engineering staff hold and maintain a valid vocational licence, planning for sufficient vocational licence holders to be on duty to provide adequate resource for workshop and on-the-road support throughout the traffic day.
• Develop the relationship between the stores and the workshop to promote cooperation. Arrange for the correct component parts to be available when scheduling vehicles for repair. Review stock levels to ensure they match demand without exceeding budgeted levels of stock holding.
• Monitor the performance of external contractors undertaking vehicle maintenance and repair to ensure quality of work and compliance with vehicle maintenance standards.
• Produce on a timely basis, engineering cost statements for use in third party insurance recoveries ensuring that all labour and material costs are accurately captured and documented.
• Consult with Trade Union Representatives with the objective of maintaining good industrial relations whilst exercising appropriate management leadership.
• Responsible for ensuring personal knowledge is maintained of all the relevant company policies and procedures and that they are adhered to at all times. Additionally, maintain a working knowledge of current legislation that is relevant to the engineering function.
• To provide cover for the Fleet Maintenance Manager, having available suitably trained support from an engineering supervisor to cover Workshop Planner duties.
• Contribute to the effective management of the engineering function on a day to day basis to develop and maintain good relations with the Operations Dept. who are ultimately the customer.
• Making sure of MAR result achieved at high rating.
• Undertake any additional reasonable duties at the request of the Line Manager.
• Undertake any training and development activities at the request of the Line Manager.

SKILLS, EXPERIENCE, CONDITIONS SPECIFICATION:

• Minimum of Diploma in engineering.
• Flexibility of working hours if effective control of the 24/7 engineering function is to be maintained.
• Man management, leadership and organisational skills are important and essential qualities that are relevant to the role.
• Computer literate with a broad knowledge of a range of software products.
• Knowledge of all the legislation relevant and necessary for running a safe and reliable vehicle fleet and engineering workshop.
• Conversant with the requirements that ensure safe and legally compliant operation of all workshop and depot plant and equipment.
• Experienced and competent in the use of computerised fleet and inventory management systems.

Duties:

• Start from the design, development, building and qualifying of various lab instruments, the major focus is in Sample Preparation equipment including our featured FastPrep family (homogenizer).
• Develop and fabricate test equipment in line with test specifications under the direction and guidance of direct supervisor.
• Execute tests using test equipment that measures temperature, electricity, light, flow, pressure, strain, force, distance, time, noise, weight etc.
• Collect and analyze test data/results, document results and outcomes.
• Support the design and fabrication/assembly of both working and visual prototype models. Materials include foam, plastics, and various metals.
• Analyze equipment failures and factory work stoppage problems and provide solutions
• Fabricates, repairs, improves designs of and constructs mechanical and electro-mechanical equipment
• Coordinate with outside calibration vendors effectively
• Maintains detailed and up to date test data in laboratory notebook and active test logs
• Support manufacturing ramp up, and design transfer during product development

Requirement:

• Master's Degree and above in Electrical Engineering or Mechanical Engineering
• 5 years of hands-on Mechanical and Electrical experience.
• Possess broad base of knowledge with understanding and skills in the following areas: Electrical, Fabrication, Tool Making, Machining.
• Must be proficient in the use of machine shop equipment and all hand tools including saws, sanders, drills, grinders, press, brake, shear, lathe, milling machine.
• Able to operate test equipment that measures temperature, electricity, light, flow, pressure, strain, force, distance, time, noise and weight.
• Can work from prints, sketches, written and verbal instructions.
• Reads wiring/electrical and piping schematics and engineering drawings.
• Electrical experience/training in use of and design of AC and DC circuits.
• Piping experience and ability to use electrical test equipment and measuring tools necessary.
• Self-motivated, team player with excellent communication and problem solving skills
• Experience and knowledge of the following areas preferred:

1. Rapid Prototyping
2. Testing and Design Controls
3. Installation
4. Design

The position holder is responsible for checking the engineering datasheets of designers when required, assisting the production team, and E & I contractor(s) in technical clarifications and solutions to solve site problems, and assisting the commissioning team to solve E & I engineering problems

Key tasks:

• Carry out testing of all aspects of industrial generators, control panels, synchronizing panels, and fuel pump panels to ensure the product works to its specification.
• Setting up test bench and equipment includes load bank test on generators
• Able to read and understand electrical and mechanical drawings/layout
• Require to generate factory and site test report
• Troubleshoot and diagnose problems and minor repairs during testing and commissioning
• Aliasing with project engineers/managers to schedule and coordinate works to tight deadline
• Supervising and leading junior staff
• Ensure a safe work environment at all times
• Any other related activities or responsibilities as assigned by superior

Job Requirements:

• Min Nitec / Higher Nitec / Diploma in Electrical or Mechanical
• Min 1-year experience in a related field
• Knowledge of genset controllers/PLCs is an added advantage
• Good Knowledge and experience of generators will be considered engineer role
• Possess a valid Singapore class 3 driving license

Personal Competencies:

• Good interpersonal and communication skills
• Able to work as a team as well as individual under limited supervision

Job Highlights:

• Positive working environment
• 5 Days Work Week
• Attractive job package
• Flexible Work Arrangement (FWA)
• Age-Friendly Workplace Practices

• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Element has an opportunity for an Engineer (Fire Product Testing) to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

Job Duties:

• Liaise with customers for proposal and job arrangement
• Perform quality checks on equipment prior to site deployment
• Conduct hardware mecahnical test and witness at customer's site or designated site
• Prepare test and inspection reports
• Upkeep of testing equipment and calibration records

Job Requirements:

• Diploma or Degree in Mechanical Engineering
• Candidate with prior testing experience and working knowledge of laboratory safety would be an added advantage
• Knowledge and understanding of the local and international fire testing standards, building elements design standards and regulations
• Ability to interpret technical documents
• Able to miltitask and possess excellent interpersonal and communication skill

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Responsibilities

• Assist Project Manager in project management, survey, managing site works, construction activities, monitor work schedules, update progress, planning and implementation in accordance to master work plan and scope of work within project budget.

• Provide guidance and supervision to contractors/ in-¬house workers in relation to Electrical/ Structured cabling works in accordance to proposal for site build for cabling infrastructure, installation quality, and adherence to site work safety requirements and to resolve technical issues.

• Prepare project submissions, tenders, system designs, installation drawing & coordination of all technical activities on assigned projects

• Participate in project meetings and resolving project issues

Requirements

• Candidates should possess at least a Nitec/Diploma in Electrical/ Engineering or its equivalent.

• At least 1-¬3 years Project Management and hands on working experience in Electrical and/or Structured Cabling.

• Able to read/write and speak English is a must.

• Able to work independently and/or work together in a team when needed.

• Able to multi¬task

• Have a strong sense of leadership, customer oriented and problem solving skills

• Proficient in Microsoft Office

• Have knowledge in IT infrastructure will be an advantage

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer’s Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Requirements:

• Diploma in Electrical Engineering
• 2-5 years of relevant experience in the Marine related or Oil & Gas industry
• Candidate with no experience may apply
• Experienced dealing with 440V Main switchboard, Distribution Boards, Transformer, Power Generator, Main Engine, Converter, Inverter Batteries, Fire alarm & flooding system and Ship Control Monitoring & Management System
• Experience in troubleshooting on various brands of PLCs (Panasonic, Omron, Allen Bradley, Siemens, Mitsubishi, ABB, etc.) is advantageous
• Proficient in selection and integration of sensors, pneumatic systems, Stepper and Servo Motors & control systems, Power Supply Units, other electrical hard wares, etc.
• Possess man management experience in leading up to 6 men, including Supervisors and Technicians
• Willing to work as a team player to achieve assigned task within given timeline.
• Comfortable with report writing
• Able to work onboard vessels and at heights

• Other Information:
  Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Summary:

• Salary range : $4500 - $5500
• Working Days and Hours: Monday - Friday (8.30am - 6pm)
• Location of work: Somerset
• 1-month completion bonus upon completion of full year contract

Job Responsibilities:

• Responsible for conducting feasibility studies, market/customer needs analysis and financial analysis for electricity, utilities and related businesses. Specifically, the duties include:
• Conducting feasibility studies (Technical) of domestic and overseas projects/ investments, including economic (cost-benefit) analysis, project/ investment appraisal and project risk analysis
• Perform technical specifications review
• Provide engineering support for future developments of the group
• Participate in regulatory and statutory approval matters
  
  Requirements:
• Candidate must possess at least a Bachelor's Degree in Engineering (Electrical, Chemical, Mechanical)
• Minimum 5 years of relevant experience in Engineering/ Construction/ Oil & Gas industry
• Strong interpersonal communication and coordination skills

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON,

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Foo Kai Jing (Fiona)
Registration Number: R2199329
EA License No: 06C2859 (MCI Career Services Pte Ltd)

Nanyang Technological University’s ANT Group – NTU Joint Lab is a collaboration between ANT International and NTU. The partnership will explore privacy-preserving methods for large language models (LLMs) and will be overseen by a joint research committee.

We are looking for a Research Engineer II to involved in research and development collaboration with industry, on AI Safety and Trust Technology, especially on the topic of applying fully homomorphic encryption in privacy-preserving machine learning. The successful applicant is expected to be familiar with fully homomorphic encryption and its applications in AI models.

Key Responsibilities:

• Research and development of trust technologies such as privacy-preserving machine learning which are important components of digital trust platforms.
• Be involved in privacy-preserving machine learning and fully homomorphic encryption system development and implementation.
• Assist in preparation of reports and scientific papers.

Job Requirements:

• Master’s degree in computer science, mathematics, information theory or related field
• Participation in privacy, security, and trust related conferences and journals
• Good programming skill, preferably with experience in implementing cryptographic algorithms.
• Be familiar with the following programming languages: C/C++
• Good communication skill, self-motivated, and could deliver under tight schedule

We regret to inform that only shortlisted candidates will be notified.