1. Manage the team of RTOs, supervision of site set up, earth works, drainage works and reinstatement works

2. Report to Qualified Person

3. Prepare weekly reports and monthly reports.

4. Attend the meeting with client and consultants

5. Report any non-compliances to Qualified Person

6. Ensure the site Safety

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Job Description

• To assist engineering supervisor in the review of project orders relevant specification and/or data sheets
• Act as secondary check and make recommendation based on common industrial engineering practice, where necessary
• To aid supervisor in providing and implementing cost effective and best engineering solutions for project in order to stay competitive
• To support sales, project and production team on various aspects of technical/engineering matters
• To prepare and maintain accurate engineering documents, i.e. general assembly drawing with BOM, control schematic drawing, test procedure, data sheet and engineering library
• Manage engineering change function and ensure engineering documents are updated accordingly
• To support and assist engineering supervisor in providing sound engineering practice and engineering calculation where applicable in a timely manner top meet project timeline
• Providing field support for the customers to resolve after sales / any technical issues
• Travel along with Technicians to installation base and sites if situation arises
• To act as the main administrator and to maintain the SAP item master data
• To assist engineering supervisor and manager to drive the department’s improvement programs and/or process efficiency initiatives
• Perform additional related duties as requested or required

Job Requirement

• Bachelor degree / Diploma in Mechanical/Instrumentation or equivalent
• 1-2 years experience in either marine, oil & gas or automation industry is preferred
• Possess knowledge in instrumentation and control system
• Conversant with all industrial standards related to valve automation
• Able to read and interpret drawings, specifications and technical documents
• Knowledge of Autocad 2D/3D or drafting software and SAP will be an advantage
• Strong verbal and written communication skills
• Fresh graduates are welcome to apply for this entry level position

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

· To identify project : Active participation and identification of prospective project through regular contacts with customer (face to customer)

· To liaise with allocated customer for sales acquisition

· To review customer requirements and prepare offers to allocated customer and follow-up offers with customer and keep updated project information

· To finalise and negotiate on contract with customers

· To commit and achieve the order intake budget

· To prepare project schedules

· To maintain existing account and help expand sales network

· Good contact with M&E Contractors & Consultant

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Descriptions:

* Site coordination, Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Involve in Project planning, electrical & control, instrumentation / sensor, programming, Testing and Commissioning, Service and Maintennace, Documentation and Training

* Experience in AutoCAD drawing or equivalent will be added advantages

* Ad-hoc engineering support when required.

* Willing to work on fast pace environment.

* Willingness for standby duties or work after office hour or during weekend / Public Holiday

Job Requirements:

* Relevant graduate diploma for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance.

* Fresh graduates are welcome.

* Hands on experience in automation system implementation and support.

* Experience in programming, site coordination and support

* Electrical, instrumentations and control knowledge

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Plan, schedule, and oversee renovation projects from start to finish.

• Coordinate with architects, contractors, and other stakeholders to ensure timely project completion.

• Monitor project progress and address any delays or issues.

• Review and modify structural designs to ensure safety and compliance with building codes.

• Provide technical advice on materials, techniques, and construction methods suitable for renovations.

• Prepare cost estimates and budgets for renovation works.

• Conduct on-site inspections to ensure quality and adherence to specifications.

• Oversee demolition, retrofitting, and structural reinforcement activities.

• Ensure proper implementation of health and safety standards on-site.

• Ensure all renovation works meet local regulations and building codes.

• Inspect completed work to confirm structural integrity and functionality.

• Address any defects or rework requirements promptly.

• Liaise with clients to understand their needs and ensure satisfaction.

• Provide regular updates on project status, budgets, and timelines.

• Prepare and submit detailed reports and documentation for all project phases.

Requirements:

• Bachelor's degree in Civil Engineering or a related field.

• Relevant professional certifications or licenses (e.g., PE or equivalent).

• 3-5 years of experience in construction, specifically in renovation or retrofitting projects.

• Proven track record of managing renovation projects from start to finish.

• Strong knowledge of construction materials, structural engineering principles, and renovation techniques.

• Proficiency in design and project management software (e.g., AutoCAD, SAP2000, Primavera, or MS Project).

• Ability to analyze and solve structural and design challenges.

• Strong attention to detail and commitment to quality.

• Excellent organizational and time-management skills.

• Effective communication and leadership abilities.

• Familiarity with local building codes and regulations.

• Willingness to visit construction sites regularly and adapt to on-site challenges.

Job Description:

Requires an expert with knowledge of a broad range of IT technologies.
* Proven 2years of experience as an IT professional.
* Knowledge of Linux/UNIX and/or Windows Server operating systems is essential
* Understanding of Nutanix prism, Microsoft HyperV and related virtualisation technologies
* A good knowledge of MS SQL
* An understanding of SAN, NAS and Veeam storage technologies including storage replication
* Maintain inventory and asset configuration documentation for network switches, servers and workstations.
* Ensure the implementation of IT Security System that are aligned of High Availability and Disaster Recovery
* Ensure network security, efficiency and availability for entire IT infrastructure.
* Experience of open-source software and the principals behind it. and using it
* Knowledge of capacity planning and performance measurement techniques
* Strive to learn and ability to interpret performance statistics, identify bottlenecks and translate application load projections into infrastructure utilization projections
* An understanding of Enterprise Security and IT risk management
* Some knowledge of programming languages and current software development practices such as Visual Stdio

Requirements:
- Diploma or Degree in Electronic or IT
- At least 2 years in related field
- Knowledge of VM, Microsoft Servers, Unix, VLAN and etc.
- Knowledge of server and desktop hardware troubleshooting and setup
- Strong analytical, problem solving and decision-making skills
- Ability to work Independently
- Preferable with CCNA

Responsibilities

· Perform start up and commissioning , audit & installation checks on engine & its

related system.

· Troubleshoot electrical and electronic related problem on engine & attachments.

· Conduct failure analysis on electrical components and prepare written report.

· Co-ordinate activities with vendors/ contractors.

· Provide technical support to customer on engine electrical/electronic related

issues, recommend repairs and provide solution.

Requirements

· Diploma or Degree in Marine / Electrical Engineering

· 3 -5 years working experience in the marine, automation or power generation

industry or 5 years’ working experience with Nitec or Higher Nitec in Marine/Electrical Engineering holder

· Knowledge of power generation, generators synchronize and control, marine

propulsion system, shut down / alarm devices on engine.

· Experience in equipment / engine testing & troubleshooting.

· Shipyard working experience / sea going experience will be an added advantage.

The Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability.

Roles & Responsibilities:

• Develop detailed process designs for complex wastewater treatment projects.
• Lead pilot studies and data collection efforts to validate process concepts.
• Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).
• Perform detailed calculations related to plant process design and prepare system operation & control philosophy.
• Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.
• Support Business Development on technical presentations and/or meetings with potential or existing clients.
• Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.
• Assist in project implementation, including process-related document preparation and technical clarification with client.
• Participate in testing and commissioning work.
• Any other works as instructed by the company management.

The Service Engineer is responsible for providing ocean going vessels with on-site and remote technical assistance regarding water and chemical treatment asset protection program adherence, energy management programs, cleaning solutions, welding, refrigeration and sealing products and installation services and repair of equipment. The Service Engineer will investigate and approve operational quality of onboard programs, processes and system equipment and instruct vessel crew in the operation and maintenance of the programs and systems. Serves as company liaison with customer on administrative and technical matters for assigned projects.

Principal Duties and Responsibilities:

• Analyze current application of Company programs and products onboard vessels
• Evaluate consistency of Water Treatment and Energy Management programs through on-site sample analysis and observation
• Collaborate with Chief Engineers and marine officers about full scope and application of Company product line
• Provide solutions for increased efficacy of Company products and identify potential vessel needs
• Supervise, whenever necessary, inspections, chemical cleanings, and installation and repair of Company equipment
• Provide training to the crew
• Maintain vessel information files through the use of service/technical assistance reports and conceptualize information towards achieving actionable knowledge
• Visit accounts with Account Executives and Area Manager to better understand client needs & key contacts
• Other tasks and projects may be assigned from time to time

Required / Desired Knowledge, Experiences and Skills:

• Relevant Bachelor’s or Diploma degree with 3-5 years’ experience, or 5-8 years of related experience, in a technical role in the Marine or Chemical industry
• Strong interpersonal skills when working with colleagues and international maritime clients
• Strong communication skills, both verbal and written
• Strong technical knowledge and experience
• Flexible and motivated work ethic, with desire to serve the needs of the clients
• Commitment to safe working practices and environmental stewardship
• Understanding of maritime regulations a plus

Education/Certifications:

• Degree or Diploma with over 2 years of experience in Marine engineering and Mechanical or chemical engineering related background

Physical Working Environment:

Position may be exposed to harsh industrial and external elements such as heat, vibration, noise and weather when onboard vessels and at ports. Must be able to navigate the structures and obstacles commonly found on ocean going vessels, such as vertical stairs, gangways, and narrow passages, and poses safety awareness around operating machinery and moving objects. Position requires travel approximately 25%.

Responsibilities

• Perform Reliability, Maintainability and Supportability (RMS) analysis, to ensure an effective through life support capability package to support the System.
• Engage design engineers on design specifications and influence Reliability and Maintainability (RAM) in their design.
• Engage customers and contractors, and to ensure RAM and ILS deliverables are on schedule and of quality.
• Lead ILS team of technical writers, technical trainers and supply support management to ensure supportability of the Systems.

Requirements

• Degree in Mechanical Engineering or Mechatronics Engineering or equivalent.
• Preferably RAM and ILS knowledge. Training / OJT will be provided, if not equipped with basic statistics skills.
• Preferably knowledge in either Automotive and/or Artillery systems.
• Meticulous in quantitative analysis and strong in statistical analysis.
• Good leadership skills and project management skills.
• Strong communication & interpersonal skills.
• Entry Level candidate are welcome to apply

Responsibilities:

- Systems design and selection of equipment instrumentation and controls.

- Reviewing of customers’ specifications requirement and drawings.

- Define specifications and scope of work to contractors.

- Startup, testing, commissioning and troubleshooting of plants.

- Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control. - Responsible for Single Line Drawing, Control Schematic drawings. - Develop engineering capabilities and work with sales team on project proposal and bidding.

- Reviewing of customers' specifications and drawings.

- Execution of projects.

- Preparation of tender activities.

Requirements:

- Recognised degree by PE Board in Electrical / Instrumentation Engineering.

- Minimum 3 years relevant working experience, preferably with experiences in FEED of LV/MV switchboards, MCC, MCB, Control Panels etc and in Water & Waste Water industries.

- Knowledge in Instrumentation and Control.

- Able to read & understand single line diagram and generate Bill of Materials from single line diagram.

- Knowledge on control, schematics, motor controls and materials take-off.

- Proficient in AutoCAD, Microsoft Office.

- Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.

- Those with relevant project management, process design, and service & maintenance experience will be an added advantage.

*** Please apply with detail resume, stating present and expected salary, date of availability and/or notice period required.

Operational Support:

• Assist the Account Manager in coordinating and prioritizing maintenance tasks, addressing issues encountered by the team.

• Support the optimization of manpower, standard time, equipment, and energy usage.

• Provide regular updates on maintenance activities and help resolve operational challenges.

Customer Relationship Management:

• Assist in responding to customer complaints and support customer satisfaction investigations.

• Work with the Account Manager to collect feedback from customers, Dealers/Distributors, and maintain positive relationships.

• Help escalate complex issues to the Account Manager that may impact service quality or business performance.

Financial Support:

• Assist the Account Manager in monitoring financial performance, documenting expenses, and helping to track account receivables.

• Support the management of after-sales service delivery, including the use of Microsoft Business Central for financial tracking.

• Aid in the preparation of financial reports, including service revenue and margin data.

Team Management:

• Provide administrative support in the recruitment, interviewing, and training of technicians as required by workload demands.

• Support the management of a team of technicians by tracking their schedules, workload, and performance metrics.

• Help facilitate communication between technicians, subcontractors, OEMs and the Account Manager to ensure smooth operations.

Logistics and Procurement:

• Assist with parts, materials, and tools procurement for scheduled maintenance, repairs, and emergency service calls.

• Support logistics planning to ensure that the necessary resources are available for maintenance activities.

• Aid in the coordination with subcontractors, from comparing quotations to ensuring timely delivery of services and materials.

Contract and Quotation Support:

• Help in the preparation and management of contract renewals, ensuring that all necessary documentation is in place.

• Assist the Account Manager in generating quotations for simple repairs and service requests.

Health, Safety, and Compliance:

• Help drive Environmental, Health, and Safety (EH&S) initiatives, ensuring compliance during all maintenance operations.

• Support the monitoring of safety standards and participate in creating EH&S awareness within the team.

Performance Metrics:

• Assist in tracking and reporting key performance indicators (KPIs), such as technician productivity, field expenses, and Aftermarket Service Sales revenue.

• Provide regular feedback on operational performance to the Account Manager.

Job responsibilities:

• Assist the Sales Team in reviewing technical documents and providing feedback.
• Prepare accurate cost estimates based on customer specifications and drawings.
• Generate quotations and perform follow-up actions to close sales.
• Provide technical and engineering support to sales personnel.
• Respond promptly to customer inquiries and technical specifications.
• Offer technical assistance to customer service related to product issues.
• Monitor and update the status of sales quotes and proposals.
• Update and maintain the costing master list.
• Assist in sourcing new materials and suppliers as required.
• Ensure compliance with QMS (Quality Management System), EHS (Environmental Health and Safety), and L&E (Labor & Ethics ) procedures.
• Support various sales-related projects and tasks as assigned.

Requirements:

- Diploma in Mechanical Engineering

- Preferably with 2 – 3 years working experience in the printing/label industries an advantage

- Proficient in Microsoft office and IT savvy

- Driven with positive mentality, strong initiative and a team player

- Resourceful, meticulous, willing to be hands on

- Possess strong communication, interpersonal, coordination and customer service skills

- Willing to learn and able to work under pressure in a fast pace environment

Responsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTOResponsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

· Degree in Civil/Structural Engineering (recognized by Singapore PE Board)

· Minimum 5 years’ of precast experience in commercial and condo building projects

We are looking for Electrical Engineers to expand our team.
Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

· Meet customers and generate enquiries to develop potential spare parts / maintenance contract business, build and develop assigned accounts and relationship, site assessments, etc.

· Hunt for new potential customers, via cold calls, to meet and exceed sales order Intake.

· Promote sales of new pumps / replacements, spare parts (i.e., pump parts and mechanical seals) and maintenance contracts, to new and existing customers.

· Attend promptly to enquiries and understand customers’ needs in order to fulfil their requirements.

· Validate on commercial and technical requirements before generating quotations to customers, with close follow-ups up till quotation status being closed.

· Assist Sales Manager in strategic planning and statics collection for the sales progress.

· Correspond with factories, KSB companies and contractors / dealers for support; in relation with terms of price, technical support / service, and delivery.

· Utilise and update CRM (C4C) database on registered products to installed base and customer visits records.

· Ensure proper handover of purchase order (in terms of technical and commercial with supporting document / costing sheet) to sales admin for order processing.

· Any other ad-hoc duties as per assigned by HOD.

Planning co-ordination with main contractor and sub-contractor

- Arrange and co-ordination for fabrication and installation of steel structural

- Arrange and co-ordination of manpower for fabrication and installation

- Preparation Mathod Statement, risk accessment and safe work procedure

- willing to learn & positive mindset

- Email send to [email protected]

RESPONSIBILITIES
Able to utilize advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling.Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.

Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.

Performs assigned repairs, emergency and preventive maintenance. Completes maintenance and repair records as required.

Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.

Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum.

Maintains the building lighting system, including element and ballast repairs or replacements.

Performs welding, carpentry, furniture assembly and locksmith tasks as needed.

Responds quickly to emergency situations, summoning additional assistance as needed.

Performs other duties as assigned.

Job Description:

• Oversee the day-to-day operations of facilities, ensuring a safe, efficient, and well-maintained environment.
• Coordinate maintenance and repair activities for buildings, grounds, and equipment.
• Manage relationships with external vendors, contractors, and service providers.
• Implement and enforce health and safety protocols.
• Identify cost-saving opportunities, and ensure fiscal responsibility.
• Implement energy-saving initiatives and sustainable practices.
• Implement and promote environmentally sustainable practices.
• Address tenant or employee concerns related to facilities.
• Maintain accurate records of facility-related activities.
• Generate reports on maintenance, expenditures, and key performance indicators.
• Execute maintenance projects, including preventive maintenance, equipment upgrades, and infrastructure improvements.
• Follow project scopes, timelines, and budgets, ensuring that the project milestones are met.
• Coordinate with internal teams to ensure the timely completion of projects.
• Monitor and report project progress and suggest necessary adjustments to ensure objectives are achieved.

Qualifications:

• Diploma or Degree in Engineering or equivalent.
• Minimum 2 years’ experience in M&E.

Job Description & Requirements
Responsibilities:

Develop software solutions by studying information needs; conferring with users; studying systems flow, data usage and work processes; investigating problem areas; following the software development lifecycle.


Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and proposed solutions


Document and demonstrate solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code


Prepare and install solutions by determining and designing system specifications, standards and programming
Improve operations by conducting systems analysis; recommending changes in policies and procedures


Update job knowledge by studying state-of-the-art development tools, programming techniques and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations


Protect operations by keeping information confidential
Provide information by collecting, analyzing and summarizing development and service issues


Accomplish engineering and organization mission by completing related results as needed


Support and develop software engineers by providing advice, coaching and educational opportunities


First and foremost, developing software our users need
Mentor junior and mid-level engineers


Collaborate with team to brainstorm and create new products
Grow engineering teams by interviewing, recruiting and hiring
Make informed decisions quickly and taking ownership of services and applications at scale


Work collaboratively with others to achieve goals
Be a persistent, creative problem ­solver
Remain cool and effective in a crisis
Stay on the leading edge of development practices


Passionate about great technologies, especially open source
Understand business needs and know how to create the tools to manage them

Job Description:

• Develop a Non-Routine Lifting program and advise the Construction Manager accordingly.
• Develop specific Lift Plans.
• Liaise with the Engineering Department for engineering calculations and drawings as required to develop specific Lift Plans according to his Lifting program.
• Prepares procedure in coordination with vendors for internal shifting and load out operations.
• Wart management for project cargo loading and offloading operation active projects, load out operations by floating crane and Roll on load outs.
• Attend JSA meeting and client RA meeting for the assigned project and report to Section Head/Lifting Superintendent/Production Manager/GMO.
• Assist Engineer in preparing yard layout drawing for module location as per construction and load out sequence by confirmed projects and assisting tender department in lifting and load out feasibility check.
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.
• Liaise with Lifting / Rigging Superintendent on a day-to-day basis for work progress.
• Liaise with client representatives, classification society surveyors and others to comply with inspection requirements.
• Resolve any technical problems or issues faced at the work site
• Ensuring that the ground conditions are safe for any lifting operation to be performed by mobile cranes

Job Requirements:

• At least 8 years of experience as a lifting supervisor.
• Experience and knowledge in heavy lifting.
• Obtained Lifting Supervisors Safety Course and Work-At-Height Certificate

Roles:

-Interpretation and analyze of production drawings & documents.

-Implementing best fabrication / machining practices and techniques to develop and maintain efficient processes to achieve productivity, quality and safety.

-Planning of project and management of the project team to keep project on schedule and budget.

-Handle all day-to-day issues and troubleshooting problems as they arises finding efficient and effective solutions.

-Estimate costs for quotation preparation.

-Coordinate and work closely with management, customers, contractors and suppliers.

-Maintain good customer relationship.

-Perform other duties as assigned to ensure success of project and company objectives.

Requirements:

-NItec / Diploma in Mechanical / Manufacturing Engineering or related.

-At least 5 years experience in metal fabrication and machine shop activities.

-Self-motivated and result-driven mindset

-Great communication and interpersonal skills