Job Purpose

The Assistant Engineer’s job scope shall include leading a team of Technical Officer(s) to perform Preventive Maintenance (PM), Corrective Maintenance (CM), Overhaul (OH) and Engineering Support (ES) on all SMRT Thomson-East Coast Line (STEL) Trains, Depot and Workshop equipment so as to provide a safe, reliable and comfortable journey for our commuters.

Responsibilities

• Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.
• Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.
• Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.
• Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.
• Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.
• Ensure spares, tools and equipment used are in good condition and calibrated if necessary.
• Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.
• Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System
• Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.
• Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.
• Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.
• To support the group during incidents, accidents and emergencies.
• Ensure excellent housekeeping are maintained within all work areas.
• Maintain a high level of work discipline and standards.
• Perform any other task as assigned.

Qualifications & Work Experience

• Diploma in Electrical, Mechanical or Mechatronics Technology/ Engineering from a recognized institution.
• Preferably 5 year’s relevant experience in the railway environment.

• Industry: Pumps, blowers, Industrial Equipments, mining, waste water treatment.
• Identify & develop new business opportunities
• Establish new accounts as well as maintaining with existing customers
• Meeting Company objectives and expectations
• Marketing function for new products
• Corresponding with customers on quotations and purchase order related issues
• After Sales service calls

Requirements

• Diploma / Nitec in Engineering field
• Possess own vehicle / Class 3 Driving License
• Welcome entry level (Training Provided)
• Positive attitude, hardworking
• Work location at Tuas South
• Basic salary + Commission + Car allowance + Petrol Card

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

We invite highly motivated, dynamic professionals to join our growing Information Technology Services team.

Information Technology Services is dedicated to creating and delivering value to our business by leveraging on IT technologies. The team is responsible for delivering customer-focused solutions and high-quality IT services internally to enable our business.

The role involves:

• Design, implement, and maintain network and firewall infrastructure across both on-premises and cloud environments, ensuring optimal performance and reliability.
• Ensure compliance with internal standards, policies, guidelines, and information security protocols regarding network infrastructure. Implement best practices and industry standards.
• Drive diagnosis and resolution of complex network and application connectivity issues. Oversee technical support escalations and assist Tier 2 teams when necessary.
• Lead and mentor junior engineers, guiding them in the completion of tasks and helping to develop their problem-solving skills. Collaborate with cross-functional teams to achieve strategic objectives.
• Oversee network infrastructure projects, from planning to implementation, ensuring timely delivery and resource optimization. Engage with external vendors for managed services or new project implementation.
• Maintain detailed documentation of network configurations, policies, and procedures. Conduct semi-annual reviews of these materials to ensure accuracy and compliance.
• Act as the primary point of contact for escalated issues, providing timely updates to senior management and stakeholders. Work closely with the IT leadership to align network strategies with business goals.

⠀

The ideal candidate should possess:

• Degree in Computer Science, Information Technology/Security, or Systems Engineering.
• At least 5 years of relevant experience in cloud environments and network technologies, with 3 years managing projects related to connectivity engineering.
• In-depth knowledge of Cisco and Palo Alto firewall technologies, with a strong understanding of network infrastructure, services (TCP/IP, Routing, DNS), and cloud connectivity (AWS, Azure).
• Proven ability to diagnose and resolve complex network issues efficiently, providing timely and effective solutions.
• Excellent communication skills, with the ability to convey technical information clearly to stakeholders and team members. Demonstrated experience leading technical teams and managing cross-functional collaborations.
• Ability to analyse situations rigorously, logically, and systematically.
• Ability to contribute to continuous improvement of processes and services.
• A proven track record ensuring the proper functioning of operational services.
• Understanding of, and practical experience with, ITIL processes is an advantage.
• Ability to multi-task independently, while also working effectively in a team within a dynamic, fast-paced environment.
• Strong technical experience with Palo Alto security product such as (Prisma Access and Palo Alto Next Generation Firewall).
• Strong technical experience with Palo Alto security products, such as Prisma Access and Palo Alto Next Generation Firewall. Relevant certifications like Palo Alto Prisma Certified Cloud Security Engineer (PCCSE), Palo Alto Networks Certified Network Security Engineer (PCNSE), and optionally Cisco certifications, are highly desirable.

Only shortlisted candidates will be contacted by KPMG Talent Acquisition team, personal data collected will be used for recruitment purposes only.

At KPMG in Singapore we are committed to creating a diverse and inclusive workplace. We believe that diversity of thought, background and experience strengthens relationships and delivers meaningful benefits to our people, our clients and communities. As an equal opportunity employer, all qualified applicants will receive consideration for employment regardless of age, race, gender identity or expression, colour, marital status, religion, sexual orientation, disability, or other non-merit factors. We celebrate the different talents that our people bring and support every staff member in their journey to achieve personal and professional growth. One of the ways we do this is through Take Charge: Flexi-work, our flexible working framework which enables agile and innovative teams to help deliver our business goals.

Mandatory Key Skills:

1. Role is focused on Middleware Configuration & App Infrastructure Integration

2. (Secondary Requirement): Application Software Aspect (Trouble Shoot Error Logs only, no programming needed)

4. Data Processing

5. 3-tier environment installation

6. Configuration and troubleshooting, Shell Script, SQL, NOSQL, System Integration, System Diagram

7. Application Infra Aspect (JBoss, Hive, HDFS, Hadoop, Cloudera, SSH, SSO *Not just simply MQ Series)

8. Please Note this is not server side infra

What you will be doing:

- Install Apache, JBoss, Maria DB

- Configuration and establish connection between above and Cloudera cluster includes edge node, hive, HBASE

Job Objectives

Potential candidate will support AML Projects/CRs for Singapore and Regional entities.

We are seeking a skilled System Integrator to join our team. As a System Integrator, you will be responsible for performing middleware

installations, configurations, and troubleshooting, as well as system integration with other systems and applications.

You will work closely with architects, security team, and development team leads to ensure compliance with

enterprise design principles, security standards, and control measures

Job Objectives

Potential candidate will support AML Projects/CRs for Singapore and Regional entities. We are seeking a skilled

System Integrator to join our team. As a System Integrator, you will be responsible for performing middleware

installations, configurations, and troubleshooting, as well as system integration with other systems and applications.

You will work closely with architects, security team, and development team leads to ensure compliance with

enterprise design principles, security standards, and control measures.\

Key Responsibilities

• Participate in end-to-end projects for the implementation of MLS includes middleware and LAMP

• Collaborate with architects, security team, and development leads to ensure compliance with design principles,

security standards, and control measures.

• Liaise with application teams across the group and countries to build enhancements according to the technical

solution plan.

• Analyze user requirements and convert them into design documents and other system documentation, capturing

key design decisions.

• Plan technical deliverables, perform design and development tasks to meet project requirements within schedule.

• Perform data mapping and process mapping with interfacing applications.

• Escalate any issues that impact project schedules and propose workarounds or resolutions.

• Create comprehensive technical documents for the implemented solutions.

• Test, maintain, and recommend software improvements to ensure strong functionality and optimization.

• Work with production support team to conduct root cause analysis, review code, and perform unit testing.

• Collaborate with Test Management teams to ensure completion of system integration testing (SIT), user

acceptance testing (UAT), performance/load testing, and application security testing with high-quality results.

• Collaborate with other application teams and business users to prepare test cases and test data for UAT and

Mock Run environments.

• Manage project change request approval windows and deployment schedules.

• Provide technical and testing support before and after production deployment.

• Liaise with other units across IT and Business in the organization.

• Manage external vendors for project delivery within the scheduled timelines.

Key Requirements

Must Have

• Bachelor's degree in computer science, information technology, or a related field

• At least 10 years of experience in Unix/Linux, Shell Scripting, SQL and database management

• At least 6 years of hands-on experience in middleware (Apache, Jboss, and Maria database) installation,

configuration and troubleshooting

• Proficiency in firewall, network, and security concepts to draft system diagrams and raise firewall connectivity

requests and perform verification

• Experience in integration with SSO, LDAP, SSL, FTP, Connect Direct and encrypted connectivity setup

• Experience in drafting system integration diagram, data flow diagram, class / ER diagram, program sequence

diagram, deployment diagram, etc

• Ability to multitask effectively and handle multiple team communication and coordination on development and

testing tasks

• Highly driven, pro-active and a strong team player

• Excellent interpersonal skills and written and verbal communication skills in English

Good to Have

• Experience in Hadoop ecosystem and technologies

• Experience in NoSQL database or Big Data

• Experience in Control-M, Git, Jenkins, JIRA, Aldon and Remedy

• Experience in MS Team, MS SharePoint, MS Office and Confluence

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for manual lathe machines and CNC machines
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities

• Oversee the workshop's day-to-day activities, ensuring smooth operations and customer service.
• Develop and implement policies and procedures that promote operational efficiency and optimal workshop maintenance.
• Ensure the workshop staff is adequately trained, motivated, and operating to the company's standards.
• Act as the escalation point for any operational challenges, ensuring prompt and effective resolution.
• Liaise between the sales, operations, and customer teams to ensure alignment and effective communication.
• Regularly assess and improve workflows and working conditions to reduce labor turnover and optimize efficiency.
• Ensure compliance with all company safety protocols and housekeeping standards during operations.
• Compile and submit detailed technical reports to customers and manufacturers.
• Prepare and manage reports covering workshop performance, budget, and expenses.
• Plan and track financial budgets and key performance indicators to meet targets.
• Address any issues that arise within the operations team and handle them in a transparent and timely manner.
• Undertake additional tasks as assigned by supervisors.

Requirements

• Diploma/Degree in Engineering - Electrical Preferred
• Strong knowledge of Material Handling Equipment (Forklifts, cranes etc.)
• Prior working experience in managing daily workshop for at least 2 years
• Candidates with Class 3 Driving License will be an advantage.
• Candidate with AGV Experience is preferred.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

PC Deployment and Configuration

• Install, configure, and deploy personal computers and related peripherals, including desktops, laptops, monitors, and printers.
• Ensure that all PCs are set up according to company standards, including operating systems, software applications, and security protocols.
• Perform hardware and software upgrades as needed.

Troubleshooting and Technical Support:

• Provide technical support to end-users for PC-related issues, including hardware and software problems.
• Escalate complex problems to the appropriate IT teams when necessary.

Maintenance and Upkeep:

• Conduct routine maintenance on PCs to ensure optimal performance and security.
• Perform system updates, patches, and antivirus scans.
• Manage inventory of PC hardware and software licenses.

Documentation:

• Maintain accurate records of PC configurations, repairs, and maintenance activities.
• Updates of support tickets and resolutions details on job completion.

Job Requirements:

• Diploma / Nitec in IT, Computer Engineering, Electrical, Electronic or relevant
• Welcome entry level (Training provided)
• Mandarin speaking to work with chinese associates
• 5 days work (Monday to Friday)
• Islandwide work locations (Mostly in the East areas)
• Salary $2300 - $2800

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Responsibilities

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue

Requirements

• Experience in Windows server OS, Unix/Linux OS & VM environment
• Good knowledge and hands-on experience with Microsoft SQL Server would be an advantage
• Good Working knowledge with VPN, firewall appliances and Cisco routers/switches
• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment
• Pro-active, dynamic and with good analytical/conceptual thinking
• Fresh graduates are welcome to apply

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Responsibilities:

l Plan, execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery

l Conduct root cause analysis & implement pro-active measures

l Responsible for supporting operational systems satisfying contractual Service Level Agreement

l Perform and manage routine preventive maintenance and operational activities promptly and effectively

l Perform troubleshooting and fault rectification

l Provide up-to-date project documentation and reports

l Diagnose and rectify technical issues

l Perform standby duties if required

Requirements:

l Experience in Windows server OS, Unix/Linux OS & virtualization environment (VMware, HyperV etc.)

l Strong troubleshooting skills and analytical mind with problem-solving aptitude

l Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment

l Pro-active, dynamic and with good analytical/conceptual thinking

l Able to work independently as well as in a team and good interpersonal skills

l Good Working knowledge with VPN, firewall appliances would be an advantage

l Good working knowledge with routers, switches would be an advantage

l Good working knowledge in hardware like servers, storage area networks (SAN), network-attached storage (NAS) devices

l Experience in hardening of OS, system and network equipment

l Experience in Patch Management

l Good Knowledge of IT Infra services like Active Directory, DHCP, DNS, Exchange/Mail Service, Database, Web or App Server etc.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Vision Inspection Systems)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in component selection, engineering evaluations, and testing of parts and sub-modules for vision inspection equipment.
• Design electrical parts and sub-modules for vision inspection systems.
• Maintain product design documents, including drawings and BOM (Bill of Materials).
• Work closely with and manage suppliers to ensure all design requirements are met.
• Provide troubleshooting expertise for design and system issues.
• Plan and coordinate the release of new designs to manufacturing.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering.
• Familiarity with CAD software for electrical layout and schematic design.
• Experience working with PC hardware, Windows OS, and relevant software.
• Knowledge of PCB/PCBA design, fabrication, and testing processes is a plus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Description

• Acts as a project lead by establishing development plans and preparing for design reviews.
• Guides others on engineering tools, test specifications and assesses application of Health, Safety, and Environment techniques during the design process.
• Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results. Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques. Contributes to Halliburton’s Intellectual Property portfolio by delivering innovative and commercially successful solutions.
• Creates an impactful relationship with Halliburton’s technical community, customers, and vendors by proactively collaborating with key stakeholders.
• Participates in professional societies in area of specialization.
• Skills acquired through the completion of a degree in Mechanical Engineering or similar discipline.

Requirement

Minimum educational requirement of a doctoral degree and zero years’ experience or a master’s degree and two or more years’ related experience or a bachelor’s degree and four or more years’ related experience.

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Responsible for the design of controls system and programming coding.
• Modify controls design and other documents according to the company standards and compliance to industry standards.
• Develop specific program as per project requirements based on company coding standard.
• Support in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.

Requirements:

• Diploma in any relevant engineering discipline
• At least 5 years of PLC experience in using Allen Bradley and Siemens-S7 programming.
• Good communication and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Animal Science Care Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Responsibilities:

• Act as the Technical Subject Matter Expert (SME) for the Private Wealth system (FinIQ platform) and other assigned banking systems (including bespoke Backoffice systems and tools).
• Analyze, design, develop, customize, test, implement, and maintain assigned systems.
• Work closely with the Tech Lead to gather requirements from users, perform technical impact analysis and estimate effort for development/customisation.
• Create and update functional and technical documentation, as well as prepare test cases.
• Develop, modify, and customize applications/platforms based on requirements, overseeing or working with other team members when necessary.
• Conduct peer reviews of source code and documentation.
• Perform unit testing, system integration testing, and support user acceptance testing (UAT).
• Prepare release procedures and support production implementations.
• Update user manuals, system operational manuals, and other essential documentation.
• Troubleshoot issues and problems, provide workarounds and/or work with the product vendor to resolve the issue where necessary. Perform root cause analysis and come up with preventive measures.

Requirements:

• Bachelor's Degree in Computer Science, Computer Engineering, Information Systems, or a related field.
• 5+ years of experience in software development with Microsoft technologies (.NET, SQL Server/SSIS/SSRS, Azure).
• 3+ years of hands-on experience with the FinIQ platform in Private Wealth management.
• Strong understanding of the banking domain, particularly in Private Wealth.
• Proven ability to work effectively within a complex matrix organization.
• Solid knowledge of SDLC methodologies, particularly waterfall.
• Excellent presentation, communication, and coordination abilities.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24938

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Assume a critical role in defining the future of a globally recognized firm and have a direct and significant effect in a realm tailored for top achievers in site reliability.

As a Lead Site Reliability Engineer at JPMorgan Chase within theChief Technology Office, you hold a leadership role in your team, demonstrate strong knowledge across multiple technical domains, and advise others on the technical and business issues facing them. Take lead and conduct resiliency design reviews, break up complex problems into digestible work for other engineers, act as a technical lead for medium to large-sized products, and provide advice and mentoring to other engineers.

Job responsibilities

• Leads initiatives to improve the reliability and stability of your team’s applications and platforms using data-driven analytics to improve service levels

• Collaborates with team members to identify comprehensive service level indicators and stakeholders to establish reasonable service level objectives and error budgets with customers

• Demonstrates a high level of technical expertise within one or more technical domains and proactively identifies and solves technology-related bottlenecks in your areas of expertise

• Ensures the reliability, availability, and performance of PAM systems leveraging vendor products including CyberArk, BeyondTrust, Microsoft, and HashiCorp Vault

• Develops and maintain automation scripts and tools to streamline PAM operations and reduce manual intervention

• Responds to and resolve incidents related to PAM systems in a timely manner

• Conducts regular security assessments and audits of PAM systems

• Works closely with Technology Teams to ensure seamless integration and operation of PAM systems

• Provides weekend coverage on Saturday and Sunday from 8 AM to 5 PM SGP, when needed

• Participates in an on-call rotation for after-hours support as needed..

Required qualifications, capabilities, and skills

• Bachelor’s Degree in Computer Science, Engineering, Mathematics or other related disciplines

• 5+ years or equivalent expertise in site reliability engineering

• Deep proficiency in reliability, scalability, performance, security, enterprise system architecture, toil reduction, and other site reliability best practices with the ability to implement these practices within an application or platform

• Fluency in at least one programming language such as (e.g., Python, Java Spring Boot, .Net, etc.)

• Deep knowledge of software applications and technical processes with emerging depth in one or more technical disciplines

• Proficiency and experience in observability such as white and black box monitoring, SLO alerting, and telemetry collection using tools such as Grafana, Dynatrace, Prometheus, Datadog, Splunk, etc.

• Proficiency in continuous integration and continuous delivery tools (e.g., Jenkins, GitLab, Terraform, etc.)

• Experience with container and container orchestration (e.g., ECS, Kubernetes, Docker, etc.)

• Experience with troubleshooting common networking technologies and issues

• Ability to identify and solve problems related to complex data structures and algorithms

• Ability to expand and collaborate across different levels and stakeholder groups

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=21b93c1870dfde88b34a086076603f0e

Our client is a distributor of automotive and industrial solutions.

• Manage and configure network devices such as firewalls, routers, VPNs, internet proxies, and wireless networks.
• Optimize enterprise networking, including WAN, LAN, and VPN implementations and support.
• Monitor system performance and troubleshoot issues to ensure optimal performance and reliability.

Requirements:

• CCNA certified
• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of experience in Infrastructure Engineering.
• Good knowledge with internet architecture designs (TCP/IP, DNS, DHCP, Proxy and Firewall).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

What We Do

At Goldman Sachs, our Engineers don’t just make things – we make things possible. Change the world by connecting people and capital with ideas. Solve the most challenging and pressing engineering problems for our clients. Join our engineering teams that build massively scalable software and systems, architect low latency infrastructure solutions, proactively guard against cyber threats, and leverage machine learning alongside financial engineering to continuously turn data into action. Create new businesses, transform finance, and explore a world of opportunity at the speed of markets.

Engineering, which is comprised of our Technology Division and global strategists’ groups, is at the critical center of our business, and our dynamic environment requires innovative strategic thinking and immediate, real solutions. Want to push the limit of digital possibilities? Start here.

Who We Look For

Goldman Sachs Engineers are innovators and problem-solvers, building solutions in risk management, big data, mobile and more. We look for creative collaborators who evolve, adapt to change and thrive in a fast-paced global environment.

More About This Job

Listed Clearing Engineering partners closely as a front-to-back unit with Trading, Sales, and Operations to generate a direct impact on business revenue. We are committed to leading and building the best-in-class middle and back-office platforms to meet dynamic client needs and high trading volumes. We connect clients to over 40 global markets and continually expand our platforms to process new markets and products. The industry is currently going through a transformation in how business is transacted, and this directly impacts how our platforms are being designed, architected and distributed. It is an exciting time for you to make your impact on this transformation.

As a full stack engineer within the team, you'll be responsible for designing, implementing, reviewing and testing a variety of scalable applications leveraging the latest firm wide technologies. You will be expected to implement and suggest best development practices/methodologies to deliver high quality software throughout the development stack. We’re agile, global and diverse and welcome fresh perspectives. You’ll be expected to collaborate with engineers in our team and in adjacent teams and other stakeholders to ensure our solutions continue to drive our businesses forward.

RESPONSIBILITIES AND QUALIFICATIONS

HOW YOU WILL FULFILL YOUR POTENTIAL

• You will work within the global team to support both regional and global deliveries.
• You are flexible and will be able to seamlessly transition between different aspects of the technical stack.
• You have effective problem-solving coupled with strong analytical and technical skills.
• You will develop integrated scalable solutions across components utilizing micro-services, REST frameworks, APIs, ETL (extract, transform, load) frameworks.
• You will work to enhance our report offering, by improving delivery SLAs and building out additional features as requested by clients.
• You will undertake development across all tiers of our business-facing systems within a global team (NY, LDN, Bengaluru, SLC). You will be expected to implement and suggest best development practices/methodologies to deliver high quality software throughout the development stack.
• Build close working relationships with Business users covering, Middle & Back Office Operations, Product Development Teams, Markets and Clients

SKILLS AND EXPERIENCE WE ARE LOOKING FOR

• 1-3 years of Core Java development experience (Solid understanding of Core Java concepts and Design Patterns).
• Similar expertise with equivalent object-oriented languages also considered (e.g. C/ C++/C#).
• Preferable to have experience in shell scripting.
• RDBMS experience (Sybase or DB2 preferred - able to write and analyze complex queries with multi-table joins and aggregate functions)
• Desire to build strong and efficient SDLC practices.
• Systematic problem-solving approach, coupled with a hands-on experience of debugging and optimizing code, as well as automation.
• Strong interpersonal skills and drive. Excellent communication skills required, able to contribute to discussions on design and strategy.

Preferred Qualifications

• Experience with JavaScript applications.
• Experience with HTML5 and CSS2.
• Familiarity with build/deployment/runtime tools e.g. Gradle, Maven, Git, Spring, Kubernetes, Cloud
• Familiarity with building and running resilient and scalable systems
• Technical Skills - Demonstrates strong technical skills required for the role, pays attention to detail, takes initiative to broaden their knowledge and demonstrates appropriate technical/analytical skills.
• Drive and Motivation - Successfully handles multiple tasks, takes initiative to improve their own performance, works intensely towards extremely challenging goals and persists in the face of obstacles or setbacks.
• Teamwork – Gives evidence of being a strong team player, collaborates with others within and across teams.

ABOUT GOLDMAN SACHS

At Goldman Sachs, we commit our people, capital and ideas to help our clients, shareholders and the communities we serve to grow. Founded in 1869, we are a leading global investment banking, securities and investment management firm. Headquartered in New York, we maintain offices around the world.

We believe who you are makes you better at what you do. We're committed to fostering and advancing diversity and inclusion in our own workplace and beyond by ensuring every individual within our firm has a number of opportunities to grow professionally and personally, from our training and development opportunities and firm wide networks to benefits, wellness and personal finance offerings and mindfulness programs. Learn more about our culture, benefits, and people at GS.com/careers.

We’re committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: https://www.goldmansachs.com/careers/footer/disability-statement.html

© The Goldman Sachs Group, Inc., 2021. All rights reserved.

Goldman Sachs is an equal employment/affirmative action employer Female/Minority/Disability/Veteran/Sexual Orientation/Gender Identity

Mission Context: GoToCloud – Cloud Center of Excellence (CCoE)

Capital Markets IT has launched in 2022 the global transformation program “GoToCloud” to realize its Cloud strategy, targeting 80% of applications in private or public Cloud by 2026.

The GoToCloud program is managed by the transversal Architecture & Innovation team within Capital Markets IT department.

To support these ambitions, a new Cloud Center of Excellence (CCoE) has been created within the program governance. This team coalesces all applicable technical and business product expertise into one team to bring the new Cloud-native workloads or migrated workloads to the Cloud. The team will be distributed team in Paris and Singapore.

In the process, it establishes the technical objectives, reusable architecture, patterns, and associated code for the organization’s use of Cloud across the paradigms of security, reliability, scalability, cost, and time to value differentiation.

As a cloud architect/engineer you will be part of CCoE team in Singapore, fully integrated with the global CCoE from head office.

CCoE will deliver support to IT teams in their transformation journey under different types of deliverables:

• Architecture patterns and guidelines

- Creation of standards repository with documentation

- Code samples and/or white applications shared on the central source control system (GitLab)

• Solution design and engineering for specific workloads to help development teams
• Gathering of recurring use cases, issues and requirements from the field, and definition of global solutions, in collaboration with other partner departments, such as Infrastructure teams
• Contribution to training of development teams in Cloud technologies, in collaboration with the change management stream
• Contribution to other Cloud expertise/strategies communities within the company
• Welcome kit to onboard new joiners

Your core attributes will include:

• Clear communication & systematic reasoning.
• Mastery of modern design patterns for Events, Data, and APIs with a good understanding of trade-offs required depending on the use cases and current state challenges (legacy monoliths, legacy data models, legacy vendor platforms). It is expected that the individuals are already recognized technical leaders or have access to deep technical expertise throughout the engagement.
• Have a clear vision on digital trends in Finance and the imperative for financial firms to build digital platforms.
• Have a deep understanding of Capital Market IT ecosystems and how they can potentially be transformed into digital platforms using cloud technology, modern design patterns, and data products.
• Be able to work closely with senior IT and Business leaders and be able to provide credible responses to digital, business and data strategies.
• Have a prior experience in a Cloud transformation program, similar to the CMI program.
• Has an Architecture certification from at least from one Cloud provider (AWS, Azure or Google Cloud Platform)

Key Responsibilities

• Accountable for cloud solution architecture design and support during the full life cycle of the solution.
• Develop and select migration startegies and approaches to move exiting applications and workloads to the cloud
• Continues Improvement of solutions, architecture standards and guidelines and support creation of documention to ensure application design compliance and efficient operations of the cloud architecture program
• Develop proof of concepts to prove new techniques
• Ensure quality, security and legal guidelines of the robust and high sustainable code.
• Helps IT teams to design the right solution based on Cloud services
• Lead compliance assessment with the team on designed cloud architecture
• Collaborate closely with Platform and DevOps and Engineering teams to ensure timely delivery of the project deliverables
• Autonomous, self motivated and excellent team player
• Strong perseverance and diligence towards attaining goals and effective time management
• Self-starter and ambitious

Qualifications and Profile

• An ideal candidate should possess atleast 3+ years of experience aa a cloud engineer (Preferably AWS), with around 5 to 9 years of software development experience.
• Strong knowledge on AWS services, includingEc2, Lambda, Redshift, IAM, Cloudwatch and others
• Experience in Infrastructure as code (IaC) tools like Terraform, CloudFormation, or Ansible
• Proficiency in coding languages such as Java, Python etc
• Experience with REST APIs and Microservices
• Strong knowledge on OOA, OOD principles and multi-threading
• Experience with common Cloud design patterns, messaging patterns and distributed systems
• Experience CI/Cd tools such as Jenkins, GitLab CI, or AWS CodePipeline
• Knowledge of containerization and orchestration tools such as Docker and Kubernetes
• Must have alreast one AWS cloud certifications(AWS Certified Developer/ Devops or solution architect )

These responsibilities are not intended to be prescriptive – it is anticipated that staff will be encouraged to undertake activities outside their specific responsibilities.

Legal and Regulatory Responsibilities

• Comply with all applicable legal, regulatory and internal Compliance requirements, including, but not limited to, the Compliance manual and Compliance policies and procedures as issued from time to time; Financial Security requirements, including, but not limited to, the prevention of Financial Crime and Fraud including reporting obligations to the Money Laundering Reporting Officer.
• Maintain appropriate knowledge to ensure to be fully qualified to undertake the role. Complete all mandatory training as required to attain and maintain competence.

Next Step

Prepare your updated resume and expected package.

Simply click on 'Apply here' or email to [email protected] to drop your resume

All shortlisted candidates will be contacted.

Prasant Sirohi

EA License Number: 91C2918

Registration Number: R22106307

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in electrical engineering
• 2-6 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Responsibilities

• Conceptualisation and design of facades, preparation of drawings and structural calculations

• Delivery of technical presentations

• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members.

• Supervision of construction, site inspection and training of constructors

• Preparation of technical submissions, proposals and documentation.

Requirements

• Degree in Civil, Structural or Mechanical Engineering or related disciplines.

• 3 – 5 years of experience in façade design, engineering and construction and project management

• Proficient in CAD software to create designs and solve technical issues.

• Strong and diverse technical background with effective presentation skills

• Well-versed in construction trends, international design standards and building regulations.

To apply, please visit to www.gmprecruit.com and search for Job Code: 24793.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Requirements:

• Degree in Computer Science/Engineering, Information Technology, or in relevant disciplines.
• Added advantage with AWS Certification - At least 1 years of working experience in Cloud-based services, IT operations and vendor management.
• Proactive and dedicated individual with multi-tasking capabilities
• Working knowledge of and experience in Public Agency IT/System environment is preferred.
• Familiar with cloud-based services such as Government Commercial Cloud (GCC), AWS and/or Azure.
• Familiarity with security and access control measures to control privileged access to test and production environment.
• Experience in networking technologies such as WAN, LAN, Network Security, Network Configuration, Load Balancers, VPNs and DNS
• Good Experience in IAM
• Knowledge of disaster recovery, system backup and restore.
• Troubleshooting connectivity and data transfer issues.
• Certification in AWS SysOps or AWS Solution Architect Or AWS Cloud Practitioner will be good.

Responsibilities:

• Responsible for daily system health checks and proactive incident reporting.
• Support new operation initiatives and to drive development of system integration,acceptance, performance management practice and performance testing.
• Work with different stakeholders to perform technical support for any TRUST incident or request.
• Support infrastructure services either on premise, hybrid, or public cloud environment to support TRUST systems by working closely with different stakeholders.
• Support integration services between external systems either on premise, hybrid, or public cloud environment to support TRUST systems by working closely with different stakeholders.
• Responsible for ensuring backup solution for TRUST data and system are operational state
• Support for any application/platform and security incidents, work with various internal teams and vendors to resolve issues on a timely basis to meet SLA.
• Responsible for tracking and maintaining TRUST asset inventory to ensure all asset are accounted for.
• Ensure that Standard Operation Processes (SOPs) are properly documented and complies with audit requirements.