Responsibilities

• Responsible for performing corrective and preventive maintenance of CCTV Surveillance System
• Responsible in assisting in planning of the Preventive Maintenance Schedule

Requirements

• Min Nitec in Information Technology/ Electronics/ Electrical Engineering or relevant
• Min 1 years of working experience in computer networking, CCTV set up and Video Management System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supervising and checking subcontractors’ works according to design drawings, specifications, shop drawings, method statement and local codes and regulations.
• Responsible for design calculation, cost estimation, preparation of plans and details engineering design.
• Responsible for coordinating with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Responsible for overseeing and be overall responsible for works carried out by junior supervisors assigned under their care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the ubcontractors.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 3-4 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
• Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
• Responsible for creating, overseeing and testing security measures
• Responsible for mentoring junior team members

Requirements

• Min Degree in computer Science, Engineering or a related field
• Min 3 years of working experience as a Senior Network Engineer or Network Administrator
• Professional certification (e.g. CCNP, CCDP)
• Experience in network administration and architecture
• Experience with access control models and network security

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a senior process engineer you will lead the timely and successful transfer of the cell culture or purification stages of the customer’s manufacturing process(es) into the Lonza Singapore production facility. Lead the preparation, execution, process monitoring and post-campaign activities for cell culture or purification stages of the customer’s manufacturing processes at Lonza Singapore production facility and also lead investigations into process trends, issues or deviations.

Key responsibilities:

• Technology Transfer: Lead the timely and successful transfer of the cell culture or purification stages of the customer’s manufacturing process(es) into the Lonza Singapore production facility. Work with other MSAT team members, technical experts from Lonza’s customer companies or Lonza donor sites, Manufacturing (MFG), Quality Assurance (QA), Quality Control (QC), and other departments on the technology transfer.

• Process Support: Lead the preparation, execution, process monitoring and post-campaign activities for cell culture or purification stages of the customer’s manufacturing processes at Lonza Singapore production facility. Become proficient with all processes in the facility and develop ability to support/lead activities across multiple processes. Monitor processes on a regular basis to have further understanding of process behavior and prospectively identify process issues. Develop ability to generalize issues across processes.

• Write change requests and drive to implementation as needed.

• Review cell culture or purification process manufacturing batch records and provide technical input to MFG technical document writing specialists.

• Identify training needs and provide training materials for MFG operators on cell culture or purification process batch records. Work with MFG to update process batch records to enable robust manufacturing operations.

• Support plant start-up and pilot/commercial runs and perform technical investigations and help author technical reports to support close-out of deviations, trouble-shoot process excursions/issues for cell culture or purification operations.

• Design and perform/ support small-scale experiments/ studies in lab to support technology transfer or investigations.

• Follow all applicable lab safety policies.

• Support preparation of Annual Product Review (APR) and Continued Process Verification (CPV) summary reports, perform work-stages to support customer BLA filing.

• Maintain process databases and monitor batch to batch consistency of operations.

• Support inspections and audits by customer and regulatory authorities.

• Provide technical guidance and share process knowledge to MSAT team members and other departments.

• Any other duties as assigned by your Supervisor/Manager

Key requirements:

• Degree in chemical engineering, biochemical engineering, biochemistry/ chemistry/microbiology or related discipline.

• Extensive work experience in Biotechnology process development, process support, research or a related manufacturing environment.

• Prior hands-on experience in purification experimental technique and equipment.

• Knowledge of Excel as well as Statistical Data Analysis tools.

• Excellent communication skills, outstanding action orientation, and ability to work well in a cross-functional technical environment.

• Excellent technical writing skills, ability to provide attention to detail is essential.

• Demonstrated track record in completing projects under tight timelines.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description

Job Description

• Design & implement scalable & serverless architectures
• Organize and visualize raw data using data visualization tools
• Design database models
• Build & maintain deployment pipelines
• Software development lifecycle technical writing & testing

Qualification & Job Requirements

• Undergraduate student majoring in Computer Science, Information Systems, or equivalent
• Fluent Python programming skills
• Data visualization skills (e.g. Power BI, Spotfire)
• Familiarity with databases (e.g. SQL, DynamoDB)
• Knowledge of front-end languages (JavaScript, HTML/CSS) will be a plus
• Interest in cloud computing (AWS, Azure)
• Experience with PowerPoint, Word, Excel, and other Office365 products
• Excellent verbal, written communication and documentation skills
• Excellent analytical and problem-solving skills
• Demonstrates a growth mindset and comfortable working in agile environment
• Fast & independent learner
• Able to commit for more than 6 months for this internship

Learning Outcome to be gained by the intern

• Opportunity to gain more exposure in cloud computing & FinOps domain
• Exposure working in agile environment & global setup
• Continuous training on skills, competences and tools
• Able to experience wide range of technology e.g. serverless technologies, Infrastructure as Code, DevOps, APIs, and more

Brief write-up of the department

The Cloud Computing team develops the strategy and works with teams worldwide to govern, grow, and operate Cloud solutions.  Our team embraces the regulatory challenges of our industry and drives innovative, secure, and compliant use of Cloud Service Providers.  We collaborate closely with internal and external partners worldwide to mature our ability to utilize Cloud Service Providers. Our team also impacts application development agility worldwide via our cloud-based application hosting Platform as a Service (PaaS).

Current Employees apply HERE

Current Contingent Workers apply HERE

Search Firm Representatives Please Read Carefully 
Merck & Co., Inc., Rahway, NJ, USA, also known as Merck Sharp & Dohme LLC, Rahway, NJ, USA, does not accept unsolicited assistance from search firms for employment opportunities. All CVs / resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company.  No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. Where agency agreements are in place, introductions are position specific. Please, no phone calls or emails. 

Employee Status:

Relocation:

VISA Sponsorship:

Travel Requirements:

Flexible Work Arrangements:

Shift:

Valid Driving License:

Hazardous Material(s):

We are looking for SCCM Engineer for Singapore city for a large-scale project. This is a contract role with a global IT service leader.

• Must possess a minimum of four years of experience in industrial or consumer packaging.
• Must demonstrate strong expertise in SCCM 2012/Current Branch.
• Proven experience working in a multinational environment with flexible work schedules.
• Extensive experience in SCCM administration, monitoring, troubleshooting issues, and root cause analysis (RCA).
• Demonstrated ability to handle complex software deployment using SCCM.
• Proficient in patch management using SCCM, particularly with WSUS and Windows 10 servicing.
• Thorough knowledge of Microsoft Windows operating systems for both workstations and servers.
• Familiarity with basic SQL Server, VBS, and PowerShell scripting.
• Experience with SQL Server Reporting.
• Strong understanding and practical experience in troubleshooting SCCM-related technologies.
• Experience working with Delivery Optimization Solutions, such as Adaptiva OneSite or 1E Nomad.
• Familiarity with Intune and Cloud Management Gateway.

About Us

Zone IT Solutions is Australia based Recruitment company. We specialize in ERP and larger IT Services. We offer flexible, efficient and collaborative solutions to any organization that requires IT, experts. Our agile, agnostic and flexible solutions will help you source the IT Expertise you need. Our delivery Offices are in Melbourne, Sydney, Singapore, and India. If you are looking for new opportunities your profile at [email protected] or contact us at 0434189909

Also follow our LinkedIn page for new job opportunities and more.

Zone IT Solutions is an equal opportunity employer and our recruitment process focuses on essential skills and abilities. We welcome applicants from a diverse range of backgrounds, including Aboriginal and Torres Strait Islander peoples, people from culturally and linguistically diverse (CALD) backgrounds and people with disabilities.

Job Title: Application Engineer (ID4539)
Location: Tiong Bahru
Working Hours: Mon to Fri 8.30am-6.00pm
Salary: $3000-$4500

Job Description:
• Provide technical support to users and liaise with development teams for maintenance and updates required
• Optimize applications by integrating new technologies and performing upgrades
• Contribute to manage UAT, demonstrate prototypes and completed applications
• Generate ideas for software innovation based on market trends
• Document development processes, procedures and application version histories
• Keep up with advancements in application engineering and new technologies
• Create efficient and logical databases for clients

Requirements:
• Diploma or higher professional qualification in Computer Science
• At least 2 years of relevant experience
• Proven work experience as an Application Engineer or similar role
• Strong lead developer experience in one or more of the following: Microsoft C#.Net, Microsoft VB.NET, Microsoft SQL Server, Microsoft Azure, PHP, React, Mobile Apps and AWS Micro Services
• Extensive experience in deploying, optimizing, and maintaining software.
• Excellent analytical and problem-solving abilities
• Exceptional customer service, interpersonal, collaboration and communication skills

Job Description

As a Senior/ Infrastructure Engineer, you will assume the responsibility of conceptualising and crafting cloud and infrastructure solutions, ensuring seamless integration into diverse on-premise or SaaS environments. Leveraging comprehensive expertise across vertical and horizontal technologies, your focus will be on refining, fortifying, and providing solutions to our clients. This entails overseeing the holistic technical design, encompassing infrastructure elements, integration, connectivity, and hosting.

Roles and Responsibilities

• Managing the project lifecycle of infrastructure setup and implementation for our clients.

• Designing and implementing infrastructure solutions, incorporating multi/hybrid cloud design principles.

• Continuously researching and evaluating new solutions and technologies, integrating insights and recommendations into the development process.

• Demonstrating expertise in the products and solutions of major Cloud Service Providers.

• Specialising in best practices for the design, operations, and support of private/public/hybrid cloud infrastructure, covering Network, Storage, Compute, and Security.

• Identifying potential and emerging technologies with relevance to innovation for the company.

Qualifications and Requirements

• Diploma/Bachelor's degree in Computer Science, Computer Engineering, Information Technology, or a related discipline.

• A minimum of 4 years experience in the design, implementation, and consulting of private/public/hybrid cloud infrastructure solutions.

• Hands-on experience and robust technical skills with a proven track record in IT infrastructure and/or emerging IT technologies engineering, specifically in Platform, Storage, Virtualisation, and Cloud infrastructure.

• Strong working knowledge and the ability to apply architecture concepts, frameworks, and methodologies to projects.

• Experience in business and technical analysis, architecture design, and project

• Possession of PMP and ITIL certifications is considered an added advantage.

Job Title: Senior Software Engineer (ID4540)
Location: Seletar
Working Hours: Mon to Fri 8.00am-5.30pm
Salary: $6000-$7000


Job Description
• Develop web applications using ASP.Net MVC and ASP.Net Web API, following the development standards and technical design provided
• Understanding of best practices in software development process (SDLC) including coding standards, code reviews, design patterns, source control and object-oriented programming.
• Tap knowledge from domain experts and write SQL scripts to manage & query databases to extract & generate required data for analysis.
• Ability to develop web-based dashboards to show the results for internal & external customers is preferred.
• Supports and develops software engineers by providing advice, coaching, and educational opportunities.
• Develop software solutions by studying information needs conferring with users studying systems flow, data usage and work processes
• Document and demonstrate solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code
• Design and architect new software product for data analytics
• 2nd level user support for application interface issues across systems
• Analyse issues and work with other team members to identify root cause to prevent future occurrences

Requirements and Skills
• 2 to 5 years of relevant experience in .Net core software Development .
• Working knowledge of C#, ASP.Net, MS SQL
• Degree in Engineering or Computer Science or IT
• Hands on experience in technical design patterns, development, and documentation.
• Experience using Visual Studio 2019 and later.
• Strong in SQL server complex SQL query and Stored procedure development (2+ years)
• Good knowledge of microservice architecture and SOA.
• RPA UiPath knowledge advantage.
• DevSecOps knowledge advantage.
• Knowledge in third party API integration .

• Your primary responsibility is to provide technical assistance and support to end-users within the organization.
• Your role involves resolving hardware and software issues related to desktops, laptops, and other IT peripherals.
• You will be tasked with installing, configuring, and maintaining computer systems and ensuring they operate efficiently.
• Additionally, you'll assist users with technical inquiries, troubleshoot problems, and escalate issues when necessary.
• Provide remote assistance for off-site users using remote desktop tools.
• Assist users with login issues, password resets, and access-related queries
• Your goal is to ensure a smooth and productive computing environment for all employees, contributing to the overall efficiency of the organization

• Strong understanding of desktop operating systems (Windows, macOS).
• Knowledge of desktop hardware components and peripherals
• Install and configure desktop operating systems, applications, and software updates.
• Set up and troubleshoot hardware components.
• Excellent troubleshooting skills to diagnose and resolve technical issues.
• Ability to analyze and solve hardware and software problems efficiently.
• Ability to collaborate with other IT professionals and support teams.
• Share knowledge and contribute to the overall IT support function.
• Familiarity with remote desktop tools for providing off-site support

#techsupport #desktopsupport #itsupport #ittechnician #l1support #l1desktopsupport #technology #tech