• Manage the quality assurance/quality control function on-site on various project phases.
• Ensure that the approved Inspection and Test Plan (ITP) and Method Statements are implemented by the sub-contractor on site and the particular hold points required are coordinated with the Project Team.
• Review Inspection, Test, Plans as submitted by the sub-contractor’s and ensure compliance with authorities/client's requirements.
• Closely monitor site activities, fully coordinate with site engineers, issuing NCR’s in case of non-compliance.
• Monitoring and checking calibration of plants, equipment and testing instruments.
• Monitoring plant conditions and material production during construction phase.
• Approval of source of materials, keeping track of the testing, quality and usage of materials procured for the works.
• Perform inspections of deliverables to ensure that material is as per approvals.
• Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents
• Carry out Internal Audit at the site as scheduled in the Project Quality Plan(PQP).
• Able to identify problems, root cause & offers solutions.

• Degree in Civil Engineering or equivalent
• Familiar with LTA projects job specifications in both civil and architectural works
• At least 3 years QA/QC experience in construction industry

Requirement :

Network Administration Shall administer the network equipment, either on-site or remotely, which shall minimally include the following:

(a) Checking the logs of the network equipment and network links every morning to ensure no abnormal activities;

(b) Install, maintain and upgrade all hardware, firmware and software used;

(c) Apply software and security patches as prescribed in Part 2C Patch Management Requirements;

(d) Fine-tune the network or system parameters;

(e) Patch/Re-Patch cables in patch panels, network points and all network equipment.

Perform NAC ClearPass administration for security posture check enforcement which minimally includes the following tasks.

Minimum Requirement:

• The Vendor’s support personnel who are managing the network must be trained and minimally be proficient in the following areas:
• Network technologies and protocols.
• Network configuration.
• Network utilization and performance monitoring;
• Network fine-tuning, incident troubleshooting, interpretation of statistics and traffic pattern.
• Firewall rules configuration and security setting; and
• IDS/IPS, CDN implementation and IPv6;
• (b) The Vendor network support engineer shall have at least three
• (3) years of hands-on experience in configuring routers/switches (e.g., Cisco and Alcatel), firewalls, and intrusion detection/protection systems.
• (c) The network support engineer shall minimally have the Cisco Certified Network Engineer certification, or equivalent, and have experience in WAN implementation.

Only shortlisted applicants will be notified.

EA License: 14C7275| Juhi Dwivedi : R23112291

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer PE certified or degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 3 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Develop fleet management Android application with Kotlin.
• To ensure that development meets project and design/maintenance requirements using Kotlin and Android SDK.
• Work with team members for software development and integration and testing to meet delivery.
• Debug and resolve technical issues to ensure application availability.
• Provide and document technical specifications.

• Bachelor's Degree in Computer Engineering/ Information Technology/ Computer Science or equivalent.
• Minimum 2 years of experience of development with Kotlin and Android SDK.
• Experience in developing relevant Android application.
• Prefer experience with ESRI ArcGIS Runtime/Maps SDK.
• Possesses good interpersonal and communication skills.
• Strong analytical and problem-solving skills.

A renowned M&E firm is looking for an Electrical Design Engineer to join their firm.

Job Responsibilities

• Assist for the project's electrical system specifications, design submission, shop drawings, and details.
• Assist in reviewing the project's requirements to develop design calculations for the electrical and/or power supply systems.
• Work with relevant departments to develop effective designs and solutions.
• Ensure that all installations, commissioning, and maintenance of electrical equipment conform to standards, safety, timelines and budgets.
• Report any abnormalities in electrical or power systems that will impact the project and conduct investigations immediately.
• Assist in paperwork submission.
• Ensure timely and smooth progress of works
• Perform QA/QC role on area assigned and ensure safety regulations are being complied on site
• Prepare progress report and project handover report
• Execute other assigned tasks as delegated by supervisor

Requirements

• Minimum degree in engineering or equivalent
• Preferably with at least 3 to 5 years of working experience in the construction industry or working with LTA projects and also preferably with experience in 22kv power supply.
• Excellent problem-solving skills, strong organizational skills, and the ability to effectively manage project timelines and budgets.
• Excellent communication and leadership skills.
• Ability to motivate and mentor the team.
• Familiar with construction worksite safety practices.
• Proactive, resourceful, and able to work with various stakeholders.
• 5.5 working days.

Role:System Engineer (IT Infra & Network)

JD:

Main Tasks & Responsibilities:
• Assist project or team leads in evaluating and recommending the appropriate IT infrastructure products (commercial or open source) that will meet project or customer requirements
• Take charge or support the deployment of said products, including integration and testing activities at the System-as-a-whole level
• Work with engineers from other disciplines (e.g. software, cybersecurity, integration) in the delivery of turn-key systems or proof-of-concept (POC) initiatives
• Monitor the health of infrastructure services and perform availability management for servers and its services, and assist in the resolution of operational issues
• Create & maintain technical documentation on Operations / Audit Best Practices, troubleshooting & related solutions knowledge base
• Manage the system recovery process (backup/restore of Infrastructure services and critical production server data and image) and assist in preparing incident reports in the event of outages
• Participate in failover or disaster recovery exercises of the IT infrastructure when required
• Deploy security fixes on Infrastructure services in accordance to enterprise vulnerability and patching strategy
• Support the administration of servers, VMware/Hyper-V platforms and domain controllers/LDAP servers
• Participate in the optimization of system performance and system capacity planning

Requirements:
• Degree in Computer Science, Information Technology or related disciplines
• At least three years of relevant IT experience in designing (not mandatory), deploying and managing IT infrastructure systems.
• Required knowledge and experience with Windows Server 2k16/2k19, Linux, VMware/Hyper-V virtualization, and Azure Cloud
• Knowledge of infrastructure best practices, system technologies, operation processes and system engineering methodologies
• Working knowledge of cybersecurity technologies will be desirable
• Technical certification in cloud and system technologies, such as CCNA, Microsoft Certified: Azure Administrator Associate, VCP (VMware), VMCE (Veeam), CEH etc. will be advantageous
• Good written and oral communication skills
• Motivated team player with a keen eye for details, but able to work independently as well when required
• Candidate should also be willing to explore new technical domains in order to have a holistic technical view of the digital transformation landscape

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• Design and implement AI for software engineering solutions.
• Conduct evaluations and/or user studies to validate the effectiveness of the algorithms and tools.
• Write and publish research papers and present them to reputable academic conferences.
• Package the documents, implementation code, evaluation results of the project for release.
• Liaise with other team members of this project to realize the overall goal of the project.

• Minimum Bachelor Degree in Software Engineering/Computer Science/Computer Technology/Information Systems.
• Minimum 1 year of relevant research experience in AI for software engineering research.
• Excellent knowledge about software engineering research.
• Excellent knowledge about AI.
• Highly fluent in programming.
• Competent in designing and implementing algorithms and data structures.
• Excellent oral and written communication skills.
• Excellent analytical, technical and problem solving skills.
• Self-motivated individual who can work independently and also collaboratively with team members.
• Able to work under strict deadlines.

#LI-XL1

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 8 years’ experience

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 8 years’ experience

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Responsibilities

• Responsible for supervising and checking subcontractors’ works according to design drawings, specifications, shop drawings, method statement and local codes and regulations.
• Responsible for design calculation, cost estimation, preparation of plans and details engineering design.
• Responsible for coordinating with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Responsible for overseeing and be overall responsible for works carried out by junior supervisors assigned under their care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the ubcontractors.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 3-4 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support to new product development teams
• Responsible in advising customers in the areas of high-speed signal transmission and technology development, in accordance with department strategy and objectives in terms of quality and delivery time.
• Responsible for defining, planning and executing signal integrity deliverables, including modeling, simulation, and testing. Communicate SI deliverables via reports and presentations.

Requirements

• Min Degree in Electronics Engineering, Physics or its equivalent
• Min 3 years of working experience in designing and supporting high speed electrical components
• Proficient in software tools, finite elements simulation of electro-mechanical components as well as mathematical derivation and modeling of electro-mechanical parameters

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
• Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
• Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)

Requirements

• Min Diploma in Engineering or relevant
• Min 3 years of working experience in Manufacturing Industry in Quality

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Highlights

- SGX Catalist listed company;

- Monday to Friday with flexible working hours

- West - Office located at Bukit Batok Crescent, The Spire Building, S658079

Roles & Responsibilities

- HVAC and Cleanroom products improvement;

- New product development;

- Product certification and ISO 9001 certification;

- Provide technical support to sales team and customer;

- Assisting production in improving productivity and reducing manufacturing costs;

- Perform other duties as assigned or required;

Job Requirements

- Diploma in Mechanical Engineering or equivalent;

- Experience with manufacturing, HVAC or Cleanroom experience is an added advantage;

- Initiative, proactive and responsible;

- Ability to work independently with minimal supervision;

- Strong organizational skills and effective time management;

Responsibilities

• Responsible for performing corrective and preventive maintenance of CCTV Surveillance System
• Responsible in assisting in planning of the Preventive Maintenance Schedule

Requirements

• Min Nitec in Information Technology/ Electronics/ Electrical Engineering or relevant
• Min 1 years of working experience in computer networking, CCTV set up and Video Management System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026