To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

Job Description:

• Develop and maintain responsive web applications and user interfaces.
• Collaborate with backend developers to integrate APIs and services.
• Write clean, maintainable, and efficient code using modern frameworks and libraries.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for maximum speed and scalability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in frontend development.
• Proficiency in HTML, CSS, and JavaScript.
• Familiarity with frameworks such as React, Angular, or Vue.js.
• Knowledge of responsive design principles and cross-browser compatibility.
• Strong problem-solving skills and attention to detail.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Description:

•Check and analyse drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Check and prepare for discrepancies of drawings to be highlighted to consultant

•Oversee the projects and follow the terms and conditions of contracts. Ensure compliance to contracts and the drawings with regulatory specifications

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

Job Requirements:

•Candidate has at least 2 years of working experiences that possess Degree in Construction, Civil Engineering and M&E or equivalent

•Entry level candidates are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Knowledgeable in basic Autocad software

•Able to handle construction projects with commitment on work

•Good in communication and written abilities

•Required skill : Able to use Microsoft Project to present schedule to the clients

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Developer/Senior Developer (Full Stack)

Shaping Singapore’s digital future, we at the Infocomm Media Development Authority (IMDA) often tackle head-on challenges that come with developing and deploying emerging, frontier technologies across various sectors. We Dream, Design and Deliver in the technology and media space, leading Singapore into a limitless digital future.

Join us in playing an exciting role in building Singapore’s digital metropolis.

If you have what it takes to build Singapore’s digital future with us, we are looking for a Full Stack Developer for the role in SGTraDex Technologies Pte Ltd, wholly owned subsidiary of IMDA.

What the role is:

SGTraDex Technologies Pte Ltd is a company incorporated to design, own and operate SGTraDex, a trusted and secured data exchange highway.

You will be part of the Engineering Team and will be working on enterprise level applications to build web applications that facilitates data exchanges across multiple systems.

What you will be working on:

• Drive the development team in building reusable and extensible services

• Advocate and practice agile principles in software development

• Design and build services with a focus on business value and usability

• Design systems with scalability and flexibility in mind

• Embrace and ensure “lean operations” for all system

• Contribute in technical discussion or solutioning session

• Perform code reviews and encourage best practices

• Maintain user guides and technical documentations

What we are looking for

• Experience with Cloud hosting or PaaS such as AWS, Azure, Google Cloud, Heroku, Firebase, etc

• Write high quality and maintainable code on open-source (Linux based) web platforms and frameworks (Example: NodeJS, Angular, ReactJS, Go, etc.)

• Experience with both frontend and backend development from development to operation

• Experience with micro-service architecture

• Experience with at least 1 SQL and NoSQL database

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• Excellent written and communication and skills

• Work in a cross-functional service team consisting of software engineers, DevOps, and other specialists

For senior developers:

• Own end-to-end design and implementation for complex systems

• Provide technical leadership within the team

• Mentor junior engineers

• Review and approve code

• Take ownership of the project documentation

• Perform the Scrum master role (scrum master certification is a plus)

This position will commensurate with experience

Only shortlisted applicants will be notified

JOB SCOPE & JOB RESPONSIBILITIES

• Experience in an engineering, procurement and operations.
• Ability to analyze bills of material and drawings to understand key requirements.
• Knowledge and direct experience in negotiating contracts and quotations with Contract Manufacturers and Suppliers.
• Ability to identify cost reduction opportunities.
• Responsible for procurement, sourcing and negotiation.

JOB REQUIREMENT

• Diploma or Bachelor degree in engineering.
• At least 3 years experience in procurement engineering.
• Good procurement knowledge is a must.
• Possess good analytical skills, resourceful and independent.
• Team player
• Effective verbal & written communication skills.

Job Scope:

• Responsible for co-ordination of all technical activities on assigned project and assist in ensuring successful completion and execution of the assigned projects.

• Set up network equipment/system for site deployment.

• Participate in Site Test with Customers.

• Ensure effective communication and coordination between all disciplines and project participants in the projects, to resolve all site issue hindering the work progress.

• Assist in planning, scheduling and coordination of works and ensure proper deliverables and full compliance to the approved standards.

• Report to the Project Manager on any site issues hindering the work progress. Highlight those changes that might result in omission or variation cost.

• Report to the Project Manager/Site Manager on work progress carried out on site.

Requirements

• Nitec in Electrical and Electronic Engineering.

• Strong communication and coordination skills.

• Basic Network knowledge is required.

• Experience in Wifi, CCTV and Network is preferred.

• Good planning and project management skills.

• Resilience and ability to work under high pressure.

• Good interpersonal skills and ability to manage difficult situations and client relations effectively.

• Experience with M&E Site Coordination will be an advantage.

• Able occasionally at night to work at work for maintenance support.

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will be involved in the requirements gathering, development and testing of products as per evolving business needs as part of the end-to-end agile development lifecycle starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Participate in the requirements gathering sessions and contribute to the development of the functional/design specifications

2. Design algorithms and flowcharts to create new software programs and systems

3. Develop clean, efficient and extendable codes using HTML/CSS, Javascript, Java, .NET, React Native and other relevant programming languages.

4. Troubleshooting, debugging, maintaining and improving existing software

5. Perform code reviews and functional testing to ensure that standards are upheld.

6. Continuous review and refactoring code for reusability and reduce technical debt.

7. Work with QA Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

8. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively

9. Maintain and update library of reusable APIs, components and modules

10. Develop technical documentation to guide future software development projects

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as HTML/CSS, Javascript, Java, AngularJS, Bootstrap or other relevant programming languages

3. Participated in at least one full software or product development cycle, preferably using Agile Methodology

4. Excellent communication skills

5. Teamwork and collaboration skills

6. Possess critical thinking and problem-solving skills

Duties & Responsibilities:

• To install, troubleshoot, repair service and maintenance for Chamber, Oven, Chiller & Semiconductor Testing Equipment.
• Provide technical support in the field.
• Prepare onsite for service schedules within budgets.
• Create and execute work plans and revise as appropriate to meet changing needs and requirements.
• Manage day-to-day operational aspects of the after sales service.
• Prepare progress reports, risk assessments and customer updates.
• Continually seek opportunities to increase customer satisfaction and deepen customer relationships.
• Manage sub-contractor and ensure work compliance with specifications.

Job Specifications:

• Diploma holder in Electronics/Electrical/Mechatronics Engineering or equivalent.
• Minimum experience of 1-2 years in the Refrigeration Industry.
• Knowledge and experience in brazing will be an added advantage.
• Willing to travel.
• Self-motivated and able to work independently, with minimum supervision.

Job Description:

• Develop and maintain iOS applications.
• Collaborate with designers and backend developers to implement features.
• Write clean, maintainable, and efficient code following iOS best practices.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for performance and reliability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in iOS development.
• Proficiency in Swift and/or Objective-C for iOS development.
• Familiarity with iOS SDK, UIKit, and design patterns.
• Knowledge of RESTful APIs and third-party libraries.
• Strong problem-solving skills and attention to detail.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

We are seeking a skilled Civil Engineer to support the site project. The candidate will also supervise concreting operations and manage estimation of Bill of Quantities, project progress claims and earthwork supervision. Proficiency in AutoCad to review and make necessary adjustment to project

drawings.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Overview

We are seeking bright and friendly individuals with excellent communication skills, willingness to learn and apply new technology and a track record for providing great customer service. You will have opportunities to work in a variety of challenging IT environments to quickly build up your IT and communication skills.

What will you be doing?

As a Senior Service Engineer, you provide Level 1 and Level 2 Support to existing clients, serve as a primary contact to identify, troubleshoot and to provide resolutions to the reported issues. Your job is to work closely with R&D Team by conducting preliminary investigations i.e., replicating the reported issues raised and communicate to the support software engineers and Quality assurance engineers of your findings to facilitate in bug fixing.

Your responsibilities will include:

• Being a representative for project-specific customer inquiries and issues that you will take ownership and bring resolution.
• Ensure customer satisfaction in Project Support and Maintenance
• Collect information and perform deep-dive analysis, diagnosis, and troubleshoot.
• Commit to SLA for response and resolution, troubleshoot and perform root cause analysis of technical issues
• Communicate efficiently with the customer and the Internal R&D team on the bug fixes needed.
• Manages the status of issues raised and ensure they are resolved effectively in a timely manner.
• Continually evaluate existing processes to streamline and enhance customer support activities.
• Manage and keep tracks of change requests, bug fixes status and system updates deployments documentations.
• Prepare weekly statistic reports and able to present professionally in the weekly progress meetings with clients.
• Prepare and keep track of user manuals documentation and versions as well as release notes for upcoming enhancement releases.
• Conduct training / hand-holding sessions with users and to guide them to troubleshoot the system to resolve software issues or problems.

OK, I’m interested… is this the job for me?

We look for people who value agility, passion and teamwork; those who can bring fresh ideas to the table and want the opportunity to learn, grow, and expand their careers. Bring your aptitude and build upon what you do best for our customers, partners, team, and you.

Other qualities that you’ll need to be a fit for this role include:

• Degree in Information Technology/Computer Science/ Computer Engineering
• Preferably > 1 year experience in IT Industry managing large-scale applications support
• Pro-active, customer-focused, and comfortable dealing with clients/vendors directly.
• Excellent communication skills and the ability to interact professionally with a diverse group, executives, managers, and subject matter experts.
• Highly energetic, motivated team player, able to work under tight timelines and pressure to participate in digital transformation journey
• Good interpersonal skills, resourceful, take ownership
• Organized, meticulous, and able to work independently
• Strong analytical and troubleshooting skills
• Delivered B2B services effectively and efficiently, aware of service management preferred.
• Preference given to vendor–based software delivery experiences.
• Experience in Software Development and Microsoft SQL Server will be an advantage

Responsibilities

• Attend to all customer calls.
• Performing thorough equipment inspections, calibration, adjustment & test/repair of equipment
• Scheduling appointments for test equipment due for calibration
• Ensuring laboratory equipment is calibrated as per specifications and standards
• Addressing and troubleshooting any test equipment failures and repairing of test equipment
• Maintaining and updating a record of all documentations of the calibration process
• Administering and monitoring effectiveness of calibration procedures
• Ensuring completion of tasks as per assigned deadlines.

Requirements

• Minimum Education Level: NITEC/ Diploma in Electrical/Electronic Engineering or its equivalent
• Minimum 3 years proven work experience as a calibration technician or similar role
• Knowledge in ISO 7025 standard will be an advantage
• Strong analytical and troubleshooting skills
• Hardworking, meticulous, team player and able to work independently
• Proficency in Microsoft Office is essential

Seeking Site Engineer with prior knowledge and experience tomaintenance and troubleshooting and repair equipments such asTLD ACU, GPU, Tow Tractor, ASU, boom lift and scissors lift, hydrauliccylinder and general electrical troubleshooting. Will be deploy atvarious site in singapore for general repair, servicing andmaintenance of basic ground support equipment.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes. Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses.

Accountabilities:

• Understand the customer’s network structure and become familiar with the Customer’s network implementation and support processes and procedures to ensure supporting a network with proper SLAs.
• Carry out migrations of existing setup, features, and configuration as required by the customer in a production/testing environment and help improve plans to implement new features to increase the network stability or user requirements.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Raise equipment Return Material Authorizations (RMA’s) and to track till problem resolution and produce incident report for any severity issues that was reported by customers or end users.
• Be available for customers’ questions in assisting their needs to support network related issues and monitor customer network leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.
• Perform the wireless testing across customer’s different locations and identifying or fixing if there are any performance issues or slowness in network for wireless users.
• Identify the principal vendor best practices and only perform changes with customer approval to improve the security levels.
• Co-ordinate between his/her own Global Network Centre for any escalations or major issues and bridge between customer / senior resources / vendor / etc

The Individual and their Experience:

• Minimum 2-3 years of relevant experiences in network operations including wireless technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA certified plus any other networking certifications preferred
• Basic understanding about Routing / switching protocols.
• In-depth knowledge on Stacking / L2 technologies / STP / IP Addressing.
• Proficient at performing local / remote IOS upgrades on different products and RMAs for faulty devices in production
• Good understanding about different monitoring tools like Cisco PI / PRTG / Spectrum / Syslog / etc and TCP/IP structure and IP scheme
• Strong knowledge on Wireless / ARP / MAC / L2 loops / Switching.
• Understand DNS / DHCP / Security knowledge is an added advantage.
• Eagerness and willingness to pick up & adapt new technologies and automation.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Job Description:

1. Oversees projects management and implementation;
2. Codify implementation design into documented for end user's record;
3. Conduct training and presentation for team members and end-users;
4. Provide technical testing or support to pre-sales engineer/customer on the network setup;
5. Assist on technical communications with customer/partner, to ensure closure of sales order;
6. Ensuring that the solution can deliver on the customer’s requirements;
7. Work closely with Level 2 support, if case issue is escalated to Level 3;
8. Maintain rapport with customers and competence in managing vendors; and
9. Any other ad-hoc duties assigned.

Job Requirement:

• Degree/Diploma in IT Networking or equivalent
• At least 2 years of work experience in a SI or distributor environment with network security skillset
• Good IT knowledge in OSI 7 Layer, TCP/IP, LAN/WAN technologies and network security
• Ability to work under pressure with minimal supervision
• Excellent in communication and analytical skill
• Experience in network security projects implementation
• Positive working attitude and a good team player
• Willing to work extended office hours and after office hours when needed
• Exposure to security solution such as Firewall, local balancer or endpoint protection will be an added advantage

Job description of position

• Windows Server configuration and support
• Experience in configuring and troubleshoot Firewalls, Switches, network routing and WiFi Access Point to maximize network efficiency and security
• Maintain and updating network equipment to the latest firmware releases
• Experience in Office365, Teams, OneDrive and SharePoint support.
• Cloud experience in Azure and AWS is advantage.
• End-user, computer and software support
• Knowledge of SD-WAN technology
• Regional countries remote support is required

Minimum qualification & working experience:

• Diploma or Degree with minimum 5 years of server & IT networking support related experience.
• Experience in Firewall and Network Switch configuration.
• Must be a team player

Language proficiency and skill set:

• Prefer with CCNA/CCNP/CCIE/CompTIA Network & Security
• LAN/WAN. TCP/IP Networking, Palo Alto Firewall, Azure/AWS cloud, routing protocol

Job Description:

• Prepare project proposals & review, and seeking for approvals. Management team and Team Leaders will provide guidance. project team, management and customers.
• Work closely with business team to handle customers. Support business team for any escalations from customers.
• Organize and ensure key project milestones are achieved, eg Design Review, Factory Acceptance Test, Site Acceptance Test, etc…
• Closely monitor progress with project Gantt chart, budget and scope of work. Resolve conflicts, remove impediments, and foster positive work environment for project team.
• Manage and maintain project documents and artefacts.
• Manage and facilitate productization of projects with manufacturing and aftersales team.

Requirements:

• Min Bachelor’s Degree, preferably in an engineering field
• Knowledge in financial accounting, systems engineering, alternative and/or clean energy is advantageous
• Proficient with MS Project or similar, MS Office Suite of tools
• Fluent in English and writing skill of clear and concise reports
• Excellent communication skill, patient and precise
• Proactive team player, also able to work independently
• Motivate others and yourself