Job Responsibilities

1. Provide front and backend supports for the following security systems:

a. Access Control System – Integrated Security Management System (ISMS);

b. Electronic Key and Cabinet System: Key Management System (KMS);

c. Radio Communications: Digital Trunk Radio System (DTRS);

d. CCTV System – Video Surveillance Management System (VSMS);

e. Entry / Exit Access Turnstiles;

f. Crash Barriers; and

g. Vehicle Alert System

2. Perform corrective and preventive maintenance on all security systems.

3. Ensure critical system fault reported rectified within the shortest possible time to prevent disruption to operation.

4. Update and maintain fault rectification report.

5. Maintain security system stock inventory to ensure sufficient spare.

Job Requirements

• Meet the relevant Regulatory Authority's statutory requirement of minimum 21 years of age.
• Diploma/Higher NITEC/NITEC from a recognized training institute.
• Must be able to work rotating shifts, including weekends and public holidays
• Technical knowledge or experience in electrical/electronic work. IT Network knowledge would be an added advantage.
• Experience in CCTV or card access system.

Job Description

Overall Job Summary

The incumbent is responsible to provide support in the day-to-day overall HR and office administration functions, including handling of administering pay and employee benefits, recruitment and selection, training and development, updating of HR policies and procedures, employee relations and administrative matters.

Responsibilities and Duties

• Advertise, search and schedule candidates for interview
• Process clients’ monthly payroll and CPF
• Manage end-to-end process of on boarding and off boarding of employees
• Handle EP, work pass application, renewal, and cancellation
• Support daily administration/operations matters
• Other admin duties assigned by the Manager

Job Requirements

• Minimum 2 years of relevant HR experience with a diploma / degree in Human Resources Management or equivalent.
• Possess effective verbal and written communication skills.
• Resourceful, initiative, self-motivated, diplomatic and people-oriented.
• Good team player and yet able to work independently with minimal supervision.
• Ability to multi-task with good time management skills.
• Proficient in Microsoft Word, Excel, Power-point and IT savvy.
• Experience with Opensoft and Success Factors HRIS software will be an added advantage.
• Able to commence employment within short notice.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

• Designing, developing and enhancing electro-mechanical systems and mechatronic devices.
• Creating automated systems and the software to control them.
• Conducting research, documenting findings, and presenting reports at meetings.
• Developing design documents for mechanical parts and final products.
• Identifying areas of weakness in the Equipment and making recommendations for improvement.
• Understanding problems or client briefs and developing solutions that satisfy them.
• Selecting the required tools and materials for the process.
• Assisting with recruitment, onboarding, and training of junior Engineers or Apprentices.
• Attending workshops, training sessions, and conferences to network with others and stay on top of field advancements.
• willing to do night shift
• any service requirement from the site must go and attend any time
• Willing to work Night Shift

• Develop and implement maintenance schedules for machinery and equipment.
  Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
  Liaise internally between operations teams to address machinery breakdowns and operational concerns.Coordinate data collection on auxiliary materials from operations teams and report on a weekly basis.
  Manage receipt, maintenance, and monitoring of machinery parts inventory.
  Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.Undertake additional tasks as required to support operational needs and project requirements.Preferably with at least 3 years of working experience in related field.
• Comfortable working in Workshop environment.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

ROLES & RESPONSIBILITIES

• To be responsible for all deliverables required in the agreement with Singapore General Hospital.
• To organize his team to align with the overall client’s expectation and contractual requirements andsupport the operations of the hospital, especially in the front end engineering and customersupports. To plan and execute all fix it and programmed maintenance within the frame work of theallocated resources.
• To plan the resources available to align with the operational requirements for fix it and programmedmaintenance.
• Managing all minor repairs and fix it work within the budget.
• Work closely with other service providers in the hospital to be part of the team to create a safe andsound environment for the patients, staff and visitors, especially ISS House Keeping and Portering team to demonstrate the strength and capability of ISS’s integrated service model to be productive, efficient and effective.
• Constantly engaging the client and end users to seek feed back, gaps and improvementopportunities through survey and dialogue.
• Responsible for overall customer and end users relationship management while exercising costcontrol monitor and measure with the awareness to generating additional works to enhancemargin.
• To stabilize the team during upon operations and continued to seek improvement in theorganization structure and operations process to improve supports to the hospital.
• Manage relationship with all specialist sub-con and contractors appointed by the hospital toachieve the required KPI, client’s expectations and deliverables in the contract with SingaporeGeneral Hospital.
• Be part of the team to management energy saving and initiatives.
• Identify engineering issues and trouble shooting to response to end users’ request. Resolving andmitigating potential engineering problems and potential cause to system breakdown. Work closelywith the Central Operations to tackle engineering problems.

JOB REQUIREMENTS

1. Contractual fulfilment of ISS for the outsourced facility management contract

2. Compliance of all statutory requirements

3. Successful mobilization

4. Achieve financial margin set by the management

5. Motivation and leadership of the outsources facility management team

6. Meeting KPI requirements and meet customers’ and end users’ expectations

7. Healthy QEHS records

8. Provide an safety environment to enhance the patient’s staff’s and visitors’ experience

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent is also responsible for establishing, reviewing and overseeing the relevant mechanical design elements of new build equipment / asset enhancement activities and implementation of minor mechanical engineering projects, while ensuring the overall mechanical integrity of the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical/maintenance support and solutions to the terminal operation Teams including supporting the development of maintenance strategy focusing on equipment reliability, compliance, spares inventory requirement, preventive and predictive maintenance programmes and mechanical maintenance procedures for mechanical equipment.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical static equipment and piping systems.
• Manages the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and gas supply reliability
• Responsible to ensure compliance to applicable regulations/industry best practices, safe to operate, fit for purpose, maintainable and reliable for the site’s modified or newly build mechanical systems (such as marine loading arm, pumps, pressure vessel, safety device , etc).
• Manage and ensure list of statutory equipment (lifting machine, lifting gears, pressure vessel, safety valves, etc) are timely serviced and inspected in accordance to statutory codes and compliance standards
• Perform root cause analysis on equipment failure and provide recommendations to resolve technical issues which may also arise from vibration, RT, UT, oil and other analysis as part of predictive maintenance programmes
• Manage and maintain historical information on static and rotating equipment such as running hours, data statistical information on all plant shut down and loss of production events caused by mechanical systems, engineering documents and review applicable codes and standards for compliance purpose
• Lead technical discussions, execute and manage project schedules and cost and collaboration with external and internal stakeholders, vendors for end of life and improvement project using SLNG Management of Change (MOC) process for mechanical equipment
• Liaise with external stakeholder including government agencies on approval and risk of shutdown of mechanical system that will affect gas-send out
• Participate in RCA, RBI, HAZID, HAZOP, Model Review studies for mechanical packages, co-ordinates and close out Mechanical related issues
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose

Work Experience

• Minimum of 3-5 years’ experience in maintenance of plant equipment, rotating machinery and static equipment, preferably in oil/petrochemical or related industries
• Good knowledge and experience working on different types of in-service pipeline inspection. Knowledge of the LNG / natural gas or other hydrocarbon industries an advantage
• Relevant technical experience in maintenance of mechanical/ machinery systems i.e compressor, pump, pressure vessel, hydraulic components and piping system.
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• The incumbent should possess the following personal attributes:

1. A team player who can work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments
3. Willing to take up new challenges and responsibilities

Education

• Bachelor Degree in Mechanical Engineering or other relevant Engineering/Technical disciplines
• Candidates with professional accreditation or affiliation to professional bodies of engineers will have an advantage

Job Description & Requirements

- Administer project planning and project execution
- To study drawings, specifications and contracts to understand project requirements
- Willing to learn and hands-on
- Liaise with client, consultants & main / sub-contractors and coordinate for site activities arrangement
- Perform site inspection and ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner
- Assist in cost control and estimating activities;
- Planning and deployment of resources such as manpower, machinery, equipment and material
- Preparation of report, Method Statements and technical submissions
- Ensure the project complies with regulations and clients’ specifications
- Adhere to safety and health regulations and aim for zero accident in the workplace
- Ensure safety and housekeeping is to maintained to the highest standard
- Prepare job completion record and progress claims
- Continually seek improvements in the work systems
- Ensure all company reports and documentation are completed accurately and on time;
- To perform Ad-Hoc duties as per assigned

- Fresh Graduates are welcome to apply

-To Project management Coordinate with main-con and consultant for drawing submission, material sample submission and meeting with main-con and consultant

-Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptade layout, single line diagrams, CCTV, data Telcom operational routing diagram, ELV systems, control schematic and writing diagrams

-Identify discrepancies in tender/contract/IFC drawings and raise queries for clarification, A and A ( R and R) + Constriction Filed

- Attend all operational matters related to the daily running of the project and Handle multiple projects simultaneously

-Testing and commissioning for Electrical apparatus

-QA/QC documentation review of engineering deliverables

-LV and HV cables sizing calculations and prepare a bill of material

-Planning workforce arrangement and supervision and working planning

-Giving progress reports regularly to teams and monitoring project schedules

-Prepare Electrical shop and As-builts SLD Rcp drawing

Objectives:

· Supporting refurbishment projects within the Domestic Business Management Division.

· Support and execute business expansion plan.

· Overseeing engineering processes, ensuring technical standards are met

· Collaborating with cross-functional teams to deliver projects in a timely and cost-effective manner.

· To support refurbishment projects and business operations in the Singapore region.

· Ensure project quality, and act as a bridge between Japanese headquarters and local teams, fostering seamless communication and collaboration.

Job Responsibility:

1. Project Support:

- Plan, execute, and monitor refurbishment projects within the Capital Area.

- Assist in the execution of key projects, ensuring alignment with Japanese business standards and practices.

- Monitor project progress and report updates to stakeholders, ensure schedules effectively.

2. Technical Expertise:

- Provide technical input on refurbishment designs, materials, and processes.

- Conduct feasibility studies and risk assessments for refurbishment projects.

- Ensure adherence to industry standards, regulations, and safety protocols.

3. Collaboration and Communication:

- Work closely with internal teams, including procurement, operations, safety and quality assurance.

- Prepare and present progress reports, technical documents, and proposals in English and Japanese.

- Strong in Business Japanese communication and written skills to communicate with executives in Japan regional offices.

4. Administrative Duties:

- Handle documentation, reporting, and correspondence related to assigned projects.

- Coordinate meetings, schedules, and travel arrangements as necessary.

- Ensure all activities adhere to local regulations and company policies.

Requirements:

- A bachelor’s degree in business administration, Engineering, or a related field is typically required.

- Minimum of 3 years of experience in a business or engineering-related role.

- Strong communication and interpersonal skills.

- Ability to manage multiple tasks and projects effectively.

- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

What a System Interaction Engineer does at HP:

• Partner with the R&D, NPI and Manufacturing teams for both Supplies and Printer organizations to deliver on program deliverables.
• Define and design System Interaction testing to evaluate product performance and programs intent of meeting or exceeding customer experience.
• Collaborate with Supplies Quality team to analyze defects, understand root cause and define solutions to improve product quality.
• Automate and digitize current Test Flow for better efficiency and effectiveness.

Individuals who do well in this role at HP, usually possess:

• Bachelor's or master’s degree in Mechanical Engineering, Manufacturing Engineering, Electronic and Electrical Engineering, or equivalent.
• Typically, 0-1 years’ experience.
• Software development, python coding and RPA experience.
• Strong technical engineering leadership and capabilities.
• Effective leadership on planning, execution, and issue resolution.
• Demonstrated analytical and empirical problem-solving skills.
• Demonstrates growth mindset hallmark.
• System thinker, looking for connections, and comfortable with things being dynamic.
• Good flexibility and adaptability are key.
• Possesses strong teamwork and ability to collaborate with cross function teams.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage logistic activities within QC department

Key Responsibilities:

• Performs receipt and storage of sample in accordance to local procedure.
• Performs routine and non-routine sampling of raw materials and utilities with observation of GMP requirements
• Ensures proper packaging of samples and correct samples are shipped to offsite recipient timely
• Ensures a good inventory of QC materials (purchased and prepared materials/glassware) to support testings; ensures no over surplus of inventory
• Ensures wastes are disposed appropriately and promptly.
• Practices 6S and ensures good housekeeping of laboratory, work area and equipments.
• Supports equipment calibration and maintenance, performs autoclave requalification and washing machine verification
• Performs peer review for verification of task and data.
• Participates in laboratory investigation (when required) and assist in the timely closure investigations, CAPAs.
• Ensures proper archival of submitted document for easy retrieval
• Identifies and reports problems in QC to supervisor in a timely manner.
• Adheres to all safety and security policies and practises
• Manages ad-hoc support tasks
• Assist QC support manager in the management and operations of the team
• Scheduling day-to-day shopfloor activities and resources handling to ensure timely sample and material management Provides training to the team
• Provide guidance, support, and technical expertise to the team Involves in investigation and protocol and report writing (when required).
• Involves in SOP writing and updating.
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget

Skills:

Professional

• For QC Support Technologist - Fresh graduate of NITEC, Diploma in Science (or equivalent)
• For Senior QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 4 years of experience/Degree holder with at least 2 years of working experience.
• For Lead QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 8 years of experience/Degree holder with at least 4 years of working experience.

Technical

• Competent technical skills in good laboratory knowledge and hands on experience in inventory management
• Knowledge of cGLP & cGMP

Business

• For QC Support Technologist, Senior QC Support Technologist 1, 2
• Basic report writing skills (preferably with legible hanwriting)
• Basic planning and organizing skills (for individual time management and work planning) Good interpersonal skills
• Team player
• For Senior QC Support Technologist 3 and Lead
• Effective report writing skills
• Planning and organizing skills (for individual time management and work planning)
• Leadership and problem solving with analytical and logical thinking

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking

​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

As a Service Engineer, you have to :

• Attend to equipment fault at customers’ premises.
• Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities.
• Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met.
• Ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault.
• To carry out periodic maintenance for our customers.

You should :

• Possess a Diploma in Electronics and/or Electrical Engineering.
• 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc.
• With good interpersonal communication skills.
• Have a valid Class 3 license.
• Be ready for rotating stand-by duty.

Responsibilities

• Develop technical designs of roadworks and highways, traffic diversion schemes and delivery models according to different standards and requirements.
• Planning and supervising projects.
• Responsible for temporary traffic diversion scheme to suit construction progress.
• Coordination with relevant authorities for purpose of obtaining information and approvals.
• Preparation of Traffic Management Plan (TMP) for construction project.
• Preparation of tender documents and proposals.
• Preparation of Traffic Management Plan for road widening and viaduct construction project.
• Stakeholder management & liaising with different authorities.

Requirements

• Preferably with a Degree in Traffic Engineering and above or equivalent.
• Min 10 years experience in construction industry .
• Able to work as a team, assertive, independent, and proactive.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a skilled Process Engineer to design, implement, and optimize processes. Key responsibilities include reviewing process design documents, participating in safety and design reviews, managing change control, vendor relations, and quality risk assessments. You will oversee commissioning, qualification, and validation activities while ensuring HSE compliance. Additionally, you'll troubleshoot process issues, manage deviations, and provide SME input. Collaboration with stakeholders, SOP generation, and completing training on time are essential for success in this role.

Key Responsibilities

• Lead Process Design: Develop and review key process design documents (P&IDs, PFDs, URS, data sheets) to ensure optimal system performance and compliance.
• Drive Safety & Design Excellence: Contribute to safety and design reviews (3D models, HAZOP, DQ) to guarantee robust and safe process designs.
• Manage Project Changes: Oversee site and project change control, ensuring smooth transitions and effective execution of process improvements.
• Vendor Relationship Management: Cultivate strong vendor partnerships, ensuring timely and high-quality deliverables.
• Engage in Quality Risk Assessments: Actively participate in risk assessments to enhance process quality and minimize operational risks.
• Review & Approve Documents: Ensure all relevant technical documents are thoroughly reviewed and approved, maintaining high standards.
• Monitor & Report Progress: Track and report the status of assigned projects and tasks, ensuring transparency and alignment with timelines.
• Coordinate Field Work & Commissioning: Lead and coordinate field work, including commissioning, qualification, and validation activities, ensuring smooth implementation of processes.
• Champion Health, Safety & Environment (HSE): Take full ownership of HSE responsibilities in your designated area, ensuring strict adherence to safety standards.
• Solve Process Issues: Troubleshoot and resolve process-related issues, applying your expertise to maintain smooth operations.
• Manage Deficiencies & Deviations: Effectively address any deficiencies or deviations, working proactively to resolve them.
• Provide Expert Input: Offer Subject Matter Expert (SME) input as needed, driving improvements and operational excellence.
• Support SOP Creation: Contribute to the development and refinement of Standard Operating Procedures (SOPs) to streamline operations.
• Collaborate with Stakeholders: Coordinate with key stakeholders to ensure alignment and successful project outcomes.
• Ongoing Learning: Complete required training on time, keeping up to date with the latest tools, technologies, and industry standards.

Required Qualifications

• Minimum Degree in Engineering or Science Disciplines
• Minimum 3 years’ experience in a related field / Pharmaceutical Industry
• Proven track record in following and promoting Safety in all aspects of your role
• Strong process and automation knowledge, adequate knowledge in utility and HVAC
• Project management / coordination experience
• Proactive and self-motivated
• Adequate knowledge on cGMP and other regulatory requirements, guidelines and industry best practices
• Be IT literate and familiar with Microsoft office suite of applications
• Demonstrated proficiency of written and verbal communication skills in English (including technical writing and presentations) with ability to communicate and collaborate effectively with technical and senior management staff

Why join us?

• Generous Leave Policy including Elderly Care Leave for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions?
If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a Validation Engineer to manage and execute validation activities, including equipment, utilities, and facility qualifications. You will develop and support the creation of validation documentation, apply a science-based approach to validation, analyze data, and assist with investigating deviations. Collaboration with cross-functional teams and adherence to safety, quality, and regulatory standards are key aspects of this role to ensure the successful delivery of validation projects.

Key Responsibilities

• Lead and complete critical validation activities, including equipment and utilities qualification, facility qualification (aligned with EU Annex 1), and thermal mapping for controlled temperature chambers to ensure precise temperature control and compliance.
• Perform thorough thermal mapping as part of the qualification process for temperature-controlled chambers, ensuring that all temperature conditions are validated according to industry and regulatory standards.
• Develop and support the creation of essential validation documentation, such as Risk Assessments, plans, protocols, and reports.
• Apply a science-driven and risk-based approach to all validation activities.
• Analyze, interpret, and summarize data from thermal mapping and other validation studies to ensure compliance and operational accuracy.
• Investigate and support the resolution of deviations or non-conformities identified during thermal mapping or other validation activities.
• Collaborate effectively with stakeholders, including cross-functional teams, clients, and corporate functions, to ensure seamless project delivery.
• Guarantee the safety, quality, and timely completion of thermal mapping and validation projects.
• Ensure adherence to validation lifecycle processes (e.g., URS, FAT/SAT, commissioning, IO/PQ protocols) and compliance with international regulatory standards.

Required Qualifications

• Bachelor`s degree in a science or engineering discipline.
• Minimum of 2 years of experience in pharmaceutical CQV.
• Strong understanding of validation lifecycle processes and regulatory guidelines.
• Familiarity with industry best practices for equipment and utilities qualification.
• Fluent in written and spoken English.
• Adaptable to a fast-paced, dynamic work environment.
• A quick learner with a proactive "Can-do" attitude.
• Exceptional time management skills with strong attention to detail.
• Proficiency in presentation and facilitation is an advantage.

Why join us?

• Generous Leave Policy including Elderly Care Leave for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions?
If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.