Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The Network Engineer is responsible for managing day to day support of operational tasks, requests, incidents, and changes meeting customer’s requirements and agreed service levels. Perform and support regular preventive maintenance tasks.

The activities include:

• Respond and handling of customer requests/queries
• Incident resolution
• Change and Service Request fulfilment
• Problem ticket closure
• Preventive maintenance tasks fulfilment
• Vulnerability assessment
• to assist the Team Lead/Operations Manager to train and guide junior team members
• Develop and enhance NOC team capability

Make an Impact by

• Analysing, troubleshooting and correcting network problems remotely and on-site
• Responsibility for documenting incident RCA report the configuration of the system and (network) system performance tuning
• Responsibility for security compliance, patching, health check & hardening remediation
• Maintaining and administering perimeter security systems such as firewalls and intrusion detection systems
• Performing standard or project change request as per change window
• Provide on-call 24 x 7 support on a rotating basis
• Responsible for applying operating system updates, patches, and configuration changes
• Perform Preventive Maintenance
• Participate in customer weekly sessions

Skills for Success

• Degree in Computer Science / IT or equivalent
• Minimum 2 years of experience in in Network support and maintenance (LAN/WAN/Cloud)
• Minimum CCNA Certified
• Experienced in network/security administration in enterprise DC and Public Environment
• Experiences in supporting firewall /network product such as Cisco routers & switches, Cisco Firewalls, Cisco ACI, Aruba, Infoblox, Citrix load balancers, Solarwinds etc
• Experienced in troubleshooting system and network problems, diagnose and solve hardware/software issues, analysing system logs and identifying potential issues/incident
• Good to have a valid Singapore class 3 driving license

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.
  

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Position Overview:

Develop image/video processing algorithms for camera related applications.

Responsibilities:

1. Expand existing solutions to new levels of functionality, quality, and performance.
2. Assist other teams with algorithm implementation, testing and verification
3. Drive the productization of the hardware.
4. Algorithm documentation
5. Collaboration with external researchers.

Requirements:

Key Qualification:

1. BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
2. Knowledge of image processing algorithm development;
3. Good understanding of digital photography, image quality assessment.
3. Proficiency in C/C++
4. Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

1. Farmiliar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
2. Proficinecy in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
3. Strong mathematics background and track record of independent algorithm research.

Job Description:

• Support mechanical design, dynamic modeling, and structural simulations of mechanical systems.
• Contribute to software development for motion controllers using ROS/ROS2.
• Support development of front-end and/or back-end software for UI interfaces using the React framework.
• Participate in project implementation trials related to mobile robot fleet management.
• Support engagement in technical project planning and execution for development projects with industry partners.
• Prepare technical write-ups and presentations of project work.

Requirements:

• Strong knowledge of mechanical systems, particularly in the automotive domain.
• Proficiency in dynamic modeling and structural simulations.
• Experienced with ROS/ROS2 for motion controller development.
• Exposed to front-end and/or back-end software development, particularly using React.
• Understanding the use-cases of mobile robot fleet management.
• Exposed to NoSQL/SQL database management.
• Adequate technical project planning and execution skills.
• Able to perform basic technical writing and presentation abilities.

Minimum Qualifications/Specialization:

• Diploma in mechanical engineering, Mechatronics, Robotics, Computer Science, or a related field.
• Specialization in mechanical systems design and simulation, particularly within the automotive domain.
• Relevant coursework or experience in robotics, control systems, software development (with a focus on ROS/ROS2), and UI/UX design.
• Experience or training in software engineering best practices.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Support mechanical design, dynamic modeling, and structural simulations of mechanical systems.
• Contribute to software development for motion controllers using ROS/ROS2.
• Support development of front-end and/or back-end software for UI interfaces using the React framework.
• Participate in project implementation trials related to mobile robot fleet management.
• Support engagement in technical project planning and execution for development projects with industry partners.
• Prepare technical write-ups and presentations of project work.

Requirements:

• Strong knowledge of mechanical systems, particularly in the automotive domain.
• Proficiency in dynamic modeling and structural simulations.
• Experienced with ROS/ROS2 for motion controller development.
• Exposed to front-end and/or back-end software development, particularly using React.
• Understanding the use-cases of mobile robot fleet management.
• Exposed to NoSQL/SQL database management.
• Adequate technical project planning and execution skills.
• Able to perform basic technical writing and presentation abilities.

Minimum Qualifications/Specialization:

• Diploma in mechanical engineering, Mechatronics, Robotics, Computer Science, or a related field.
• At least 3 years of experience
• Specialization in mechanical systems design and simulation, particularly within the automotive domain.
• Relevant coursework or experience in robotics, control systems, software development (with a focus on ROS/ROS2), and UI/UX design.
• Experience or training in software engineering best practices.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct cutting-edge research in large language models, translating theoretical algorithms, frameworks, and methodologies into practical, working prototypes that demonstrate potential product applications.
• Collaborate closely with researchers and engineers to design and implement system architectures and software solutions that transition research findings into scalable, deployable products.
• Develop and build tools and frameworks to facilitate the transfer of LLM capabilities to industry partners, showcasing the practical value and impact of the research outcomes.
• Create and maintain comprehensive technical documentation, including white papers, presentations, and tutorials, to disseminate knowledge to a broader audience and enhance overall expertise in these emerging areas.
• Engage with international research communities and partners to stay abreast of the latest advancements in machine unlearning, contributing to discussions, collaborations, and initiatives that elevate Singapore’s position in the global AI and privacy research landscape.

Job Requirements:

• Minimum Masters’s degree in computer science/ engineering or related fields.
• Proficiency in Python is a must. Experience with other programming languages such as Java, C/C++, or Go, and frameworks like PyTorch or TensorFlow, is highly advantageous.
• Experience in developing and deploying machine learning models, particularly in natural language processing (NLP) and large language models (LLMs), including tasks such as data preprocessing, feature extraction, model training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques, including knowledge graphs, machine unlearning, and AI testing.
• Proficiency in working with common Linux distributions (e.g., Ubuntu, CentOS) and familiarity with shell scripting and command-line tools.
• Experience with cloud platforms (AWS, GCP, Azure) and containerization technologies (Docker, Kubernetes) is a must.
• Experience with version control systems (e.g., Git) and collaborative development tools.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Experience in AI model testing methodologies, including robustness, fairness, and explainability assessments, as well as understanding data privacy and security considerations in AI.
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

Do you want to be part of the team that revolutionizes the resource exploration and navigation industry? Atomionics is working on quantum sensors based on cold atom interferometry where atoms are cooled down to almost absolute zero using lasers. At such cold temperatures, these atoms start behaving like waves, which allows us to precisely measure the forces acting on them.

This opens up a wide range of applications including, but not limited to, paving a path in the energy transition to zero-carbon, exponentially improving the performance of inertial navigation systems, and transforming the global positioning system. At Atomionics, you will get the chance to prototype, test, refine, finalize, and produce your designs toward making our devices compact and robust for field deployment with the only constraints being power and your imagination.

We are looking for an electronics engineer who:

1. Wants the freedom to innovate by being involved in deep tech research
2. Is excited by the prospect of working within an interdisciplinary team comprised of mechanical engineers, physicists, and software engineers
3. Would like to own their work via compelling equity offerings

We are a small, focused group in a high-energy environment. Our team consists of people at the top of their domains with a diverse set of experience, such as in advanced rocket engines, the first digital cameras, and high-resolution microscopes, apart from cold atom physics. In addition, we are backed by some fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

Responsibilities

• Lead project development from hardware specifications, manufacturing methods and procedures, and manufacturing quality
• Design architecture to manage size, weight, and power of cold atom sensors to target specifications
• Propose new innovative solutions and technology

Must have skills

• Analog and digital design
• Microcontroller/microprocessor and FPGA based design, interface SPI, I2C, RS232, Parallel, USB, CAN, and SATA
• Schematic capture and PCB design layout
• Prototyping and debugging of boards
• Strong interest in and passion for technology

Nice to have skills

• Knowledgeable in RF test methodologies of RF modules and the use of RF test equipment
• Knowledgeable in solid-state and fiber-based lasers
• Knowledgeable in high power switching power supply and battery management
• Leads and owns projects
• Expertise in emerging technologies

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Overseeing projects at one or multiple stipulated sites.

• Assist project manager is the execution of the projects.

• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.

• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.

• Monitor and ensure progress of works are carried out according to project specification.

• Assist drafting team for design schematic drawing, layout drawing, P&ID drawing.

• Review and check drawing before submit to main contractor.

• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.

• Support project manager in the administration of contract, claim, variation and any dispute arise.

• Raise MR and order material & arrange manpower for necessary works.

• Advise site team for work schedule and technical issues.

• Make sure project is carried out according to schedule.

• Responsible for site supervision and implementation.

• Responsible for ensuring implementing safety measures.

Requirements:

- Minimum diploma

- 3 years or above experiences in ACMV, especially in air-conditioning industry

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Prepares and reviews key project documentation in executing the complete Subsea/Riser interface engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares and reviews project requirement specification, layout and interface drawings, design studies and other engineering deliverables using engineering common network, software and tools
• Coordinates with other engineering team members (i.e. Yard engineering, basic design and etc.), Equipment designers and Client’s SURF contractors on technical issues and design solutions in meeting project deliverables
• Participates in project meeting, attends to basic technical queries and issues related to subsea/riser interfaces, reviews and be responsible for Riser interface equipment designer deliverables
• Liaises with owners, Equipment designers, SURF contractors, , statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Generates and reviews the reports on work progress for submission to owners, statutory and classification authorities for approval and maintains project database for future references
• Preparation of technical specification (TS) for complex riser related packages.
• Technical bid evaluation (TBE) of vendor proposals to aid selection of most suitable proposal for the project.
• Reviews Vendor deliverables
• Manages & Liaises with the selected vendor to deliver the package meeting all the project requirements in a safe and cost-effective manner meeting the schedule.
• Provides engineering inputs to commercial, production and project team members on all aspects to procurement, fabrication, installation, testing and commissioning activities

Requirements

• Bachelor's Degree in Mechanical/ Offshore and Marine Engineering or equivalent
• 5 years of experience in Procurement, Planning, Designing, Integration of Subsea/Riser interface design in the oil & gas industry
• Experienced in engineering pre-commissioning and commissioning activities in package
• Possesses good interpersonal skills
• Good problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B