Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent is also responsible for establishing, reviewing and overseeing the relevant mechanical design elements of new build equipment / asset enhancement activities and implementation of minor mechanical engineering projects, while ensuring the overall mechanical integrity of the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical/maintenance support and solutions to the terminal operation Teams including supporting the development of maintenance strategy focusing on equipment reliability, compliance, spares inventory requirement, preventive and predictive maintenance programmes and mechanical maintenance procedures for mechanical equipment.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical static equipment and piping systems.
• Manages the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and gas supply reliability
• Responsible to ensure compliance to applicable regulations/industry best practices, safe to operate, fit for purpose, maintainable and reliable for the site’s modified or newly build mechanical systems (such as marine loading arm, pumps, pressure vessel, safety device , etc).
• Manage and ensure list of statutory equipment (lifting machine, lifting gears, pressure vessel, safety valves, etc) are timely serviced and inspected in accordance to statutory codes and compliance standards
• Perform root cause analysis on equipment failure and provide recommendations to resolve technical issues which may also arise from vibration, RT, UT, oil and other analysis as part of predictive maintenance programmes
• Manage and maintain historical information on static and rotating equipment such as running hours, data statistical information on all plant shut down and loss of production events caused by mechanical systems, engineering documents and review applicable codes and standards for compliance purpose
• Lead technical discussions, execute and manage project schedules and cost and collaboration with external and internal stakeholders, vendors for end of life and improvement project using SLNG Management of Change (MOC) process for mechanical equipment
• Liaise with external stakeholder including government agencies on approval and risk of shutdown of mechanical system that will affect gas-send out
• Participate in RCA, RBI, HAZID, HAZOP, Model Review studies for mechanical packages, co-ordinates and close out Mechanical related issues
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose

Work Experience

• Minimum of 3-5 years’ experience in maintenance of plant equipment, rotating machinery and static equipment, preferably in oil/petrochemical or related industries
• Good knowledge and experience working on different types of in-service pipeline inspection. Knowledge of the LNG / natural gas or other hydrocarbon industries an advantage
• Relevant technical experience in maintenance of mechanical/ machinery systems i.e compressor, pump, pressure vessel, hydraulic components and piping system.
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• The incumbent should possess the following personal attributes:

1. A team player who can work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments
3. Willing to take up new challenges and responsibilities

Education

• Bachelor Degree in Mechanical Engineering or other relevant Engineering/Technical disciplines
• Candidates with professional accreditation or affiliation to professional bodies of engineers will have an advantage

Job Description & Requirements

- Administer project planning and project execution
- To study drawings, specifications and contracts to understand project requirements
- Willing to learn and hands-on
- Liaise with client, consultants & main / sub-contractors and coordinate for site activities arrangement
- Perform site inspection and ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner
- Assist in cost control and estimating activities;
- Planning and deployment of resources such as manpower, machinery, equipment and material
- Preparation of report, Method Statements and technical submissions
- Ensure the project complies with regulations and clients’ specifications
- Adhere to safety and health regulations and aim for zero accident in the workplace
- Ensure safety and housekeeping is to maintained to the highest standard
- Prepare job completion record and progress claims
- Continually seek improvements in the work systems
- Ensure all company reports and documentation are completed accurately and on time;
- To perform Ad-Hoc duties as per assigned

- Fresh Graduates are welcome to apply

Responsibilities:

· Plan, coordinate and oversee the installation and maintenance of internal systems of hardware, software and networks.

· Implement and manage security protocols, including access controls, backups and firewalls.

· Monitor, troubleshoot IT systems, including security system and networking.

· Manage servers, email systems, CCTV, HR system and others.

· Set up user accounts and PC workstations, Apps etc.

· Ensure the efficiency and reliability of IT infrastructure.

· Support web development and maintain Company portals.

· Maintain and support the Dynamics NAV ERP system.

· Conduct programming and develop Apps to support business operation.

· Provide IT support to internal and external users as needed.

· Maintain all IT related documentation and policies up to date.

· Perform other tasks as required.

Requirements:

· Minimum Diploma in IT, Computer Engineering, or a related field.

· At least 2 to 3 years of programming experience.

· Knowledge of system security, networking and database management.

· Good programming skills, with app development experience is a plus.

· Familiarity with access control, CCTV, and alarm systems is an advantage.

· Highly adaptable with a fast-learning ability.

· Open to young professionals and fresh graduates, eager to learn and grow.

Working Hours: 8am to 5.30pm (Monday to Friday)

Work Location: 5 Jalan Tepong

(Transportation is provided, pick-up at Lakeside MRT station)

• Designing, developing and enhancing electro-mechanical systems and mechatronic devices.
• Creating automated systems and the software to control them.
• Conducting research, documenting findings, and presenting reports at meetings.
• Developing design documents for mechanical parts and final products.
• Identifying areas of weakness in the Equipment and making recommendations for improvement.
• Understanding problems or client briefs and developing solutions that satisfy them.
• Selecting the required tools and materials for the process.
• Assisting with recruitment, onboarding, and training of junior Engineers or Apprentices.
• Attending workshops, training sessions, and conferences to network with others and stay on top of field advancements.
• willing to do night shift
• any service requirement from the site must go and attend any time
• Willing to work Night Shift

Responsibilities:

• Conducts business requirement gathering, user testing, and training, and prepares necessary functional documentation
• Assists in the development and support of systems using .NET Framework 4.5 and above, Visual Studio (VS) 2015 and above, JQuery/Kendo/Telerik UI controls, MS SQL, Entity Framework, Web API, SQL Server Reporting Services (SSRS), SQL Server Integration Services (SSIS).
• Provides functional and technical support to users
• Troubleshoots and resolves system issues
• Participates in business analysis and technical design sessions
• Ensures compliance with industry regulations
• Documents system processes and presents progress reports
• Collaborates with team members and other departments to ensure smooth operation
• Manages projects as assigned, potentially serving as Project Manager
• For senior positions, provides coaching and mentoring to team members

Requirements:

• Bachelor's degree or higher in Computer Science, Information Technology, or a similar field
• At least 5 years of experience in business requirement gathering, system development, and support
• Strong functional skills in business requirement gathering and translating requirements into functional specifications, test cases, and training manuals
• Strong technical skills in .NET Framework 4.5 and above, Visual Studio (VS) 2015 and above, JQuery/Kendo/Telerik UI controls, MS SQL, Entity Framework, Web API, SQL Server Reporting Services (SSRS), SQL Server Integration Services (SSIS)
• Excellent analytical and problem-solving abilities
• Strong communication and interpersonal skills
• Ability to manage multiple projects and deliverables simultaneously
• Involvement in one or more full SDLCs for enterprise projects

Our Addresses and Working Hours:

Seatrium - Pioneer Yard

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Details:

Our client is a significant player in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised telecommunication system integrator in the oil and gas global market, they provide turnkey project systems that cover a full spectrum of services in the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, and various telecommunication system drawings.

Salary: $3800 - $5500

Job Description:

1️⃣ Lead engineering design, ensure thorough understanding of client requirements to propose optimal solutions

2️⃣ Prepare engineering documents (VDRL) and address client feedback promptly with high quality and accuracy

3️⃣ Create preliminary drawings and guide AutoCAD drafters in producing engineering deliverables

4️⃣ Incorporate industry standards and best practices into design, drawing preparation, review, and submission

5️⃣ Supervise equipment assembly, cabinet integration, system configuration, simulation, testing, and verification

6️⃣ Provide in-house training for client and commissioning engineers

Requirements:

1️⃣ Minimum Diploma in Engineering (Electronics, Electrical, Mechanic, Marine & Offshore) or possesses technical knowledge about Maritime communication systems

2️⃣ Experience in a similar role within the industrial markets

3️⃣ Experience as an ex-sailor, Ex-Radio Officer, or Ex-Navy personnel are added advantage

4️⃣ Well-organised documentation and time management skills

5️⃣ Ability to articulate and share concepts with customers and suppliers

6️⃣ Knowledge of AUTOCAD will be an added advantage

7️⃣ Site commissioning/radio surveying experience as per SOLAS / MODU (Not a must-have but good to have)

8️⃣ Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, and iBwave for UHF/GSM coverage (Not a must-have but good to have)

⭕️ Please send your updated resume to: berrylim(at)rapidrecruitmentasia.com

For quicker response, please contact me (Berry) directly at:
Telegram: (at)Berryseisei or HP: (at)+65 92472216

Rapid Recruitment Asia Pte Ltd (16C8261)
Berry Lim (R23117685)

Responsibilities

• Provide Leadership to the Electrical engineering team to comply with project requirements and to meet project schedules.
• Lead and prepare overall concept.
• Lead, prepare, & review Request for Quotations (RFQs) and specifications. Lead EPC tender as the lead for Electrical.
• Review technical proposals from OEMs to ensure compliance to our design requirement.
• Plan & Manage the Electrical Master document List.
• Plan & Manage manpower loading.
• Review cable routing, BOQ, lead engineers and drafters.

Able to understand and manage the following:
Subcontractor's submission of 66kV, 6.6kV & LV power supply system including; Power Generation System, transformer, UPS & DC systems.
Electrical Single Line drawings
Power system Analysis by ETAP
Protection coordination
Cable Size calculation
HV, MV and LV motor starter system
UPS & DC system
Solar generation system
Power Management System
Plan & coordinate Electrical Room layout
Plan & coordinate Cable tray and Busduct

Familiar with the following Equipment and System:
Generators
Circuit breakers
Transformers
VSDs
Busducts
Civil interface for switchboard installation, pull pit and penetration.

Requirements

• At least 10 years of relevant experience as Leader or Senior Electrical Engineer in EPC projects.
• Bachelor’s degree in electrical engineering or equivalent
• Leadership & people management skills
• Familiar with industrial standard, e.g, ISO, IEEE, and etc. and Singapore standard, e.g. SS638
• Familiar with statutory Regulation or Code, like Singapore transmission code. etc.
• Able to work in collaboration with various disciplines
• Able to interface seamlessly with engineering, construction, and operations contractors
• Able to work on-site in construction environment

Work location: Tuas Nexus

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

Job Responsibilities

1. Provide front and backend supports for the following security systems:

a. Access Control System – Integrated Security Management System (ISMS);

b. Electronic Key and Cabinet System: Key Management System (KMS);

c. Radio Communications: Digital Trunk Radio System (DTRS);

d. CCTV System – Video Surveillance Management System (VSMS);

e. Entry / Exit Access Turnstiles;

f. Crash Barriers; and

g. Vehicle Alert System

2. Perform corrective and preventive maintenance on all security systems.

3. Ensure critical system fault reported rectified within the shortest possible time to prevent disruption to operation.

4. Update and maintain fault rectification report.

5. Maintain security system stock inventory to ensure sufficient spare.

Job Requirements

• Meet the relevant Regulatory Authority's statutory requirement of minimum 21 years of age.
• Diploma/Higher NITEC/NITEC from a recognized training institute.
• Must be able to work rotating shifts, including weekends and public holidays
• Technical knowledge or experience in electrical/electronic work. IT Network knowledge would be an added advantage.
• Experience in CCTV or card access system.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

Element has an opportunity for a Engineer to join our rapidly expanding team. As a member of the operations team, the Senior Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision. The engineer positions must be proficient in a number of core business and technical skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures.

Location: Tuas, Singapore

Job Duties:

• Responsible for routine mechanical test such as Tensile, Hardness, Charpy and Bend Test
• Perform critical facture mechanics test such as CTOD, SENT, Rebar Fatigue
• Perform correstion test such as G48, ASTM A262, G28,SSC, HIC and etc
• Ensure smooth day-to-day operations, resolving exigencies such as urgent requirements
• Carry out supervisory responsibilities in accordance with the organisation's policies and applicable laws

Job Requirements:

• Possess a Bachelors in Mechanical Engineering, Materials Science or equivalent
• Minimum of 3 years’ pertinent post-degree engineering experience, or advanced academic/professional qualifications
• Working knowledge of laboratory safety
• In-depth understanding of testing concepts and familiar with international and local code & standards such as ASTM, BS, AWS, ASME, DNV, ABS, AS and other testing standards
• Possess a demonstrated ability to apply academic knowledge within the context of Element’s business

Roles & Responsibilities

As a Project Engineer, you’ll be at the forefront of our installations, managing projects from start to finish and ensuring everything runs smoothly. This includes preparing technical drawings, managing vendors, and coordinating with our team and clients. If you're comfortable with AutoCAD, enjoy the hands-on challenge of site work, and like to take ownership of projects, this is the role for you. Our company is under second-generation leadership, and we’re excited about expanding our reach and growing our presence in the industry—come help us shape our future!

Key Responsibilities:

· Plan and manage project timelines, resources, and budgets.

· Create technical drawings and layouts using AutoCAD.

· Coordinate with vendors and suppliers to secure project materials and services.

· Conduct site assessments and ensure project are on schedule

· Oversee safety and quality standards on site.

· Keep clients and internal teams updated on project progress.

· Tackle any issues that arise and make sure everything is completed on time and to spec.

· Maintain project documentation and prepare reports.

Working hours: Mon-Fri, 08:00 - 17:30

Requirements

· Diploma in Engineering (Mechanical, Electrical)

· Proficiency in AutoCAD and other drafting software.

· 2-3 years of project management experience, especially in industrial installations or construction.

· Strong understanding of mechanical and electrical systems.

· Good communication and coordination skills.

· Ability to manage multiple projects at once.

· Knowledge of safety regulations and project standards.

Plus Points

Possess own transport (transport allowance provided)

Key Responsibilities:

· Lead Operation plans and processes to optimize manufacturing Operations.

· Responsible for Plant operations and performance in accordance with production goals

· Technical Leadership in Production workforce for plant operation, optimization & Troubleshooting

· Coach & Guide for field and console operators reporting to Production Manager

· Cross function collaborations with Maintenance, Project, Reliability Technical- Technology and HSE functions to troubleshoot Petrochemical Manufacturing Site

· Lead the Operating Procedure development and Plant improvement activities.

· Lead plant related risk assessment and compliance of Safe operating work practices

· Hire, Train, Develop, Inspire and Coach the Production team.

· Lead emergency response, Crisis Management plan

· Provide guidance of shift team during plant troubleshooting, Start-ups/ Shutdowns / Turn arounds

· Capable to identify, develop and implement improvements / changes in the Plant.

· Lead Production ideas for improving Profitability, safety, reliability of facilities.

· Process Safety Champion for Operations; MOC/PSSR leadership

· To fill in for Production Manager during his/her absence

Key Requirements:

· Degree in Engineering (Chemical or other equivalent) with least 8-10 years of experience in Petrochemical, Refining Manufacturing facilities.

· Production Experience in Rubber, Polymer or Petrochemical plants will be preferred.

· Experience as Team Lead of Shift Teams

· Excellent Leadership, Planning & Problem-Solving skills.

· Advance Coaching & Mentoring Skill to technician and Undergraduates

· Preferred Experience of Green Field Start-up, Operating Procedure development

· Effective written & verbal communication skills

· Knowledge of Singapore Regulations & Industry HSE practices & Process Safety Basics

· Prior experience in Six Sigma, Lean, 5S, and continual improvement programs are preferred.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Assist in the design, development, and implementation of physical security systems, including access control, CCTV, and intrusion detection systems, for industrial facilities
• Ensure designs adhere to security-by-design principles and industry standards
• Conduct site assessments to identify security risks and recommend appropriate solutions
• Collaborate with cross-functional teams, including but not limited to clients and site team to ensure seamless integration of security systems
• Prepare technical documentation and reports as required
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s degree in Electrical Engineering or a related field
• Minimum 3 years of experience in electrical engineering with a focus on physical security systems in industrial plants or similar settings
• Knowledge of security-by-design principles and best practices
• Familiarity with industry standards for security systems (e.g., ISO 27001, UL 294)
• Strong problem-solving skills and attention to detail
• Excellent communication and teamwork abilities

As a Project Engineer, you will be responsible for managing the entire project lifecycle for plumbing and sanitary installations, ensuring that projects are delivered on time, within scope, and on budget. You will work closely with clients, contractors, suppliers, and internal teams to ensure smooth execution and adherence to high-quality standards.

Key Responsibilities:

1. Project Planning and Execution: Plan, execute, and oversee all plumbing and sanitary project activities from inception to completion.
   Develop detailed project plans, schedules, and budgets, ensuring realistic timelines and cost-effective solutions.
   Coordinate with engineers, architects, and other stakeholders to ensure project requirements are clearly defined and met.
   Ensure compliance with all local building codes, regulations, and industry standards.
   Monitor and evaluate project progress, making necessary adjustments to keep the project on track.
   
2. Team Leadership and Supervision:Lead and manage a team of technicians, subcontractors, and laborers, ensuring smooth project execution.
   Conduct regular site inspections to ensure adherence to safety protocols and quality standards.
   Provide direction and guidance to on-site staff, resolving issues and offering solutions to challenges that arise during project execution.
   
3. Client Management:Serve as the primary point of contact for clients, providing regular updates on project status, timelines, and budgets.
   Address client concerns and inquiries promptly and professionally, ensuring a positive customer experience.
   Build and maintain strong client relationships, ensuring their needs are met and customer satisfaction is maintained throughout the project.
   
4. Budget and Resource Management:Prepare and manage project budgets, ensuring that projects are completed within budget constraints.
   Procure materials and manage inventory to ensure timely availability of resources, avoiding delays and cost overruns.
   Track project expenses and implement cost-saving initiatives, without compromising on quality or safety.
   
5. Risk Management and Problem Solving:Identify potential project risks and develop proactive mitigation strategies to minimize delays and disruptions.
   Resolve any issues or challenges that may arise, including design changes, delays, and unforeseen obstacles.
   Maintain a proactive approach to problem-solving and continuously improve project execution processes.
   
6. Reporting and Documentation:Maintain accurate and up-to-date project documentation, including contracts, change orders, progress reports, and safety records.
   Provide regular progress reports to senior management and clients, keeping all stakeholders informed of key developments.
   Ensure the timely submission of invoices, accurate tracking of payments, and clear financial documentation.
   

Requirements:

Education:

• Bachelor's degree in Engineering, Construction Management, or a related field (or equivalent experience).

Experience:

• Minimum of 2 years of experience in project management, preferably in the plumbing, sanitary, or construction industry.

Skills:

• Strong knowledge of plumbing systems, sanitary installations, and construction processes.
• Proficiency in project management software (e.g., MS Project, Procore, etc.).
• Excellent communication, negotiation, and leadership skills.
• Ability to manage multiple projects simultaneously while adhering to deadlines.
• Strong problem-solving and decision-making abilities.
• Solid understanding of budgeting, cost control, and resource management.

Certifications:

• PMP (Project Management Professional) certification or similar is a plus.

Physical Requirements:

• Ability to visit construction sites regularly and perform site inspections.
• Ability to work in varying environmental conditions (outdoors, construction sites, etc.).

About Us:
We are a local specialist in Plumbing and Sanitary solutions, Auto Irrigation, and Rainwater Harvesting systems. With a commitment to delivering high-quality and sustainable solutions, we serve a diverse range of industries and customers. We are looking for a dynamic and results-driven Sales Engineer to join our team and contribute to the growth of our projects, product sales, and maintenance contracts in these specialized fields.

Job Description – Sales Engineer

As a Sales Engineer, you will be responsible for generating sales for projects, products, and maintenance contracts within the auto irrigation, rainwater harvesting, and plumbing & sanitary sectors. You will manage the full sales cycle—from site visits and designing solutions to proposal generation, quoting, and handing over the project to the operations team.

Key Responsibilities:

• Sales Target Achievement: You will be given a clear, realistic sales quota for both projects, product sales, and maintenance contracts. Achieving and surpassing your quota will be key to your success. The quota will be discussed transparently during the interview process and is tailored to market conditions and industry standards.
• Site Visits & Assessments: Conduct on-site visits to assess client needs and project requirements, providing expert recommendations on the most suitable solutions. Travel expenses (including fuel and accommodation if necessary) will be fully reimbursed by the company.
• Design and Proposal Generation: Collaborate with the technical team to create system designs and generate detailed proposals and quotations for clients, ensuring they are tailored to client specifications and budget.
• Client Relationship Management: Maintain strong relationships with clients throughout the sales process, from initial contact to project handover. You will serve as the primary point of contact for any queries or concerns, ensuring their satisfaction and continued business.
• Project Handover: Work closely with the operations team to ensure a smooth transition of the project details for execution, ensuring all technical specifications are met.
• KPI Management: Achieve key performance indicators (KPIs), focusing on sales targets for projects, product sales, and maintenance contracts. Regular reviews will be conducted to track your progress and ensure support for your success.
• Market Research: Stay informed about industry trends, competitor offerings, and new technologies. Leverage this knowledge to identify opportunities and maintain a competitive edge in the market.

Key Skills and Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field, or equivalent experience in a technical sales environment.
• Proven sales experience within the auto irrigation, rainwater harvesting, or plumbing & sanitary industries. Experience in designing or engineering such systems is a plus.
• Excellent communication and negotiation skills, with the ability to clearly explain technical concepts to clients and negotiate deals effectively.
• Strong problem-solving abilities, with a results-driven mindset and a proven track record of meeting or exceeding sales targets.
• Proficiency in Microsoft Office and sales management software. Familiarity with proposal generation and project management processes is essential.
• Ability to manage multiple projects and clients simultaneously in a fast-paced, deadline-driven environment.

Preferred Qualifications:

• Experience in maintenance contract sales is a plus.
• Strong local industry network and familiarity with the market.

Compensation Package:

• Base Salary: Up to $3,000 per month, based on experience. The salary will be discussed during the interview process.
• Commission: Performance-based commission for sales beyond the minimum sales quota. Commission rates will be provided clearly upon hire.
• Incentives: Additional performance-based incentives for meeting sales targets and securing long-term contracts. These incentives are designed to reward top performers.
• Travel Expenses: All travel costs related to site visits, including fuel, accommodation, and other expenses, will be reimbursed.
• Other Benefits: Comprehensive benefits package, including [e.g., healthcare, annual leave, etc.]. Further details will be discussed during the interview.

Why Join Us?

• Clear Career Growth: Opportunities for career advancement based on performance, with potential to grow into more senior roles. You will be mentored and supported by leadership, with regular performance reviews to ensure career progression.
• Diverse & Impactful Projects: Work on innovative and sustainable projects that make a difference in the industry. You’ll be involved in a range of projects across different sectors.
• Supportive Team Environment: Collaborate with a dynamic and experienced team of experts in plumbing, irrigation, and rainwater harvesting, providing ample opportunities for learning and professional growth.
• Competitive Salary & Benefits: Competitive base salary, along with a commission structure and incentives that reward success.

How to Apply:
If you are a driven and passionate Sales Engineer with a technical background and a strong sales acumen, we would love to hear from you. Please submit your resume and cover letter to [insert application email or link].

Additional Notes:

• Sales Quota: We understand that sales targets need to be achievable, and we will ensure that your quotas align with market realities. These will be clearly communicated during the interview process and adjusted based on your experience and the specific market conditions.
• Support for Design and Proposals: You will work closely with our technical team to ensure you have the right tools and support for creating accurate designs and proposals. The company is committed to providing the resources necessary to help you succeed in the sales process.

'We are seeking a dedicated and knowledgeable Service Engineer to oversee the operation on-site. The role involves ensuring that vehicles are maintained according to contract requirements and managing day-to-day operations efficiently.

Job Description:

- Oversee the operation on-site, ensuring efficient use and allocation of resources.

- Ensure that vehicles are maintained according to contract requirements.

- Monitor team performance to optimize operations.

- Schedule and coordinate regular maintenance and repair work for vehicles to ensure safety and reliability.

- Maintain records of all maintenance activities, repairs, and inspections.

- Organize and maintain physical and digital files, ensuring that important documents are easily accessible.

- Ensure that all vehicles comply with safety and emissions standards.

- Stay updated on changes in regulations and adjust fleet operations accordingly.

- Coordinate training and development programs to enhance skills and safety.

- Analyse fleet performance data to identify trends, inefficiencies, and areas for improvement.

- Prepare reports for management on fleet performance, costs, and compliance.

- Implement safety protocols and policies to minimize accidents and incidents.

- Conduct risk assessments and address any identified risks related to fleet operations.

Job Requirements:

- Proven experience in fleet management or vehicle maintenance, preferably in a similar role.

- Good understanding of safety regulations and compliance standards.

- Excellent organizational skills and attention to detail.

- Strong communication and interpersonal skills to work effectively with team members and management.

- Ability to work independently and manage multiple tasks effectively.

Contract Type:

- This position is a 2-year contract with the possibility of permanent employment based on performance and business needs.

Responsibilities and duties

· Define processes, system specifications, input-output and working parameters for hardware and/or software compatibility.

· Work on device qualifications / applications and generate suitable processes to meet or exceed customer requirements

· Work closely in cross-functional teams to develop process solutions

· Support customers in technical training during new product or process introductions, equipment process buyoff and post-sales process troubleshooting

· Assist in preparation of engineering plans and programs

· Field visit or travelling maybe required

Requirements

· Bachelor’s or Master’s degree in Engineering or Science related field

· 2-5 years of process experience on high precision electro- mechanical components and system

· Working experience in semi-conductor industry preferred

· Strong analytical and problem solving skills

· Good communication and interpersonal skills

· Good presentation skills and report writing skills

· Strong attention to detail and organization

· Self-motivated and able to work independently

** Senior grade would be offered to the candidate with strong background or relevant working experiences

Job Descriptions:

* Site coordination, Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Involve in Project planning, electrical & control, instrumentation / sensor, programming, Testing and Commissioning, Service and Maintennace, Documentation and Training

* Experience in AutoCAD drawing or equivalent will be added advantages

* Ad-hoc engineering support when required.

* Willing to work on fast pace environment.

* Willingness for standby duties or work after office hour or during weekend / Public Holiday

Job Requirements:

* Relevant graduate diploma for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance.

* Fresh graduates are welcome.

* Hands on experience in automation system implementation and support.

* Experience in programming, site coordination and support

* Electrical, instrumentations and control knowledge

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

- Managing a part of the construction

project

- Assist in technical advice and supervision

for other members of the staff

- Planning day to day work program of the

project progress

- Ensure projects meets agreed

specifications, budgets as well as

timescales

- Authorizing technical drawings and

engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed

property from start to finish

- Good communications skills