Job Responsibilities

1. Provide front and backend supports for the following security systems:

a. Access Control System – Integrated Security Management System (ISMS);

b. Electronic Key and Cabinet System: Key Management System (KMS);

c. Radio Communications: Digital Trunk Radio System (DTRS);

d. CCTV System – Video Surveillance Management System (VSMS);

e. Entry / Exit Access Turnstiles;

f. Crash Barriers; and

g. Vehicle Alert System

2. Perform corrective and preventive maintenance on all security systems.

3. Ensure critical system fault reported rectified within the shortest possible time to prevent disruption to operation.

4. Update and maintain fault rectification report.

5. Maintain security system stock inventory to ensure sufficient spare.

Job Requirements

• Meet the relevant Regulatory Authority's statutory requirement of minimum 21 years of age.
• Diploma/Higher NITEC/NITEC from a recognized training institute.
• Must be able to work rotating shifts, including weekends and public holidays
• Technical knowledge or experience in electrical/electronic work. IT Network knowledge would be an added advantage.
• Experience in CCTV or card access system.

Job Description

Overall Job Summary

The incumbent is responsible to provide support in the day-to-day overall HR and office administration functions, including handling of administering pay and employee benefits, recruitment and selection, training and development, updating of HR policies and procedures, employee relations and administrative matters.

Responsibilities and Duties

• Advertise, search and schedule candidates for interview
• Process clients’ monthly payroll and CPF
• Manage end-to-end process of on boarding and off boarding of employees
• Handle EP, work pass application, renewal, and cancellation
• Support daily administration/operations matters
• Other admin duties assigned by the Manager

Job Requirements

• Minimum 2 years of relevant HR experience with a diploma / degree in Human Resources Management or equivalent.
• Possess effective verbal and written communication skills.
• Resourceful, initiative, self-motivated, diplomatic and people-oriented.
• Good team player and yet able to work independently with minimal supervision.
• Ability to multi-task with good time management skills.
• Proficient in Microsoft Word, Excel, Power-point and IT savvy.
• Experience with Opensoft and Success Factors HRIS software will be an added advantage.
• Able to commence employment within short notice.

General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent is also responsible for establishing, reviewing and overseeing the relevant mechanical design elements of new build equipment / asset enhancement activities and implementation of minor mechanical engineering projects, while ensuring the overall mechanical integrity of the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical/maintenance support and solutions to the terminal operation Teams including supporting the development of maintenance strategy focusing on equipment reliability, compliance, spares inventory requirement, preventive and predictive maintenance programmes and mechanical maintenance procedures for mechanical equipment.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical static equipment and piping systems.
• Manages the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and gas supply reliability
• Responsible to ensure compliance to applicable regulations/industry best practices, safe to operate, fit for purpose, maintainable and reliable for the site’s modified or newly build mechanical systems (such as marine loading arm, pumps, pressure vessel, safety device , etc).
• Manage and ensure list of statutory equipment (lifting machine, lifting gears, pressure vessel, safety valves, etc) are timely serviced and inspected in accordance to statutory codes and compliance standards
• Perform root cause analysis on equipment failure and provide recommendations to resolve technical issues which may also arise from vibration, RT, UT, oil and other analysis as part of predictive maintenance programmes
• Manage and maintain historical information on static and rotating equipment such as running hours, data statistical information on all plant shut down and loss of production events caused by mechanical systems, engineering documents and review applicable codes and standards for compliance purpose
• Lead technical discussions, execute and manage project schedules and cost and collaboration with external and internal stakeholders, vendors for end of life and improvement project using SLNG Management of Change (MOC) process for mechanical equipment
• Liaise with external stakeholder including government agencies on approval and risk of shutdown of mechanical system that will affect gas-send out
• Participate in RCA, RBI, HAZID, HAZOP, Model Review studies for mechanical packages, co-ordinates and close out Mechanical related issues
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose

Work Experience

• Minimum of 3-5 years’ experience in maintenance of plant equipment, rotating machinery and static equipment, preferably in oil/petrochemical or related industries
• Good knowledge and experience working on different types of in-service pipeline inspection. Knowledge of the LNG / natural gas or other hydrocarbon industries an advantage
• Relevant technical experience in maintenance of mechanical/ machinery systems i.e compressor, pump, pressure vessel, hydraulic components and piping system.
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• The incumbent should possess the following personal attributes:

1. A team player who can work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments
3. Willing to take up new challenges and responsibilities

Education

• Bachelor Degree in Mechanical Engineering or other relevant Engineering/Technical disciplines
• Candidates with professional accreditation or affiliation to professional bodies of engineers will have an advantage

Job Description & Requirements

- Administer project planning and project execution
- To study drawings, specifications and contracts to understand project requirements
- Willing to learn and hands-on
- Liaise with client, consultants & main / sub-contractors and coordinate for site activities arrangement
- Perform site inspection and ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner
- Assist in cost control and estimating activities;
- Planning and deployment of resources such as manpower, machinery, equipment and material
- Preparation of report, Method Statements and technical submissions
- Ensure the project complies with regulations and clients’ specifications
- Adhere to safety and health regulations and aim for zero accident in the workplace
- Ensure safety and housekeeping is to maintained to the highest standard
- Prepare job completion record and progress claims
- Continually seek improvements in the work systems
- Ensure all company reports and documentation are completed accurately and on time;
- To perform Ad-Hoc duties as per assigned

- Fresh Graduates are welcome to apply

Job Description

• Perform regular / periodic maintenance for the diving hats, equipment & system.
• Monitor the expiry certs for the gauges, filters & parts.
• Perform function testing for diving systems before deployment to site.
• Inspect, repair and replace mechanical parts for the air compressors.
• Work with high pressure air cylinders and bailout bottles for maintenance / pressure testing.
• Liaise with 3rd party contractors for maintenance works and progress.

Job Requirements

• Familiar with pneumatic and hydraulic systems will be an advantage.
• Those with Class 3 driving license will be an advantage.
• Successful candidates will be sent for Dive Tech Course and all the required training.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

Job Description :

• Project management and daily operations including inspections, handover, site measurements, project management.
• Prepare submission of shop drawing, method statement, progress claims and project management reports.
• Supervise and monitor projects are carried out in accordance to company's operating procedures, quality standards and contractual specifications.
• Ensure environmental, safety and health practices are carried out at all times.

Requirements :

• Candidate must possess at least a Diploma / Bachelor's Degree in Civil Engineering or its equivalent.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Min. 5 years of working experience in Construction Industry are preferred.
• Strong analytical and communication skills.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

Responsibilities

• Provide Leadership to the Electrical engineering team to comply with project requirements and to meet project schedules.
• Lead and prepare overall concept.
• Lead, prepare, & review Request for Quotations (RFQs) and specifications. Lead EPC tender as the lead for Electrical.
• Review technical proposals from OEMs to ensure compliance to our design requirement.
• Plan & Manage the Electrical Master document List.
• Plan & Manage manpower loading.
• Review cable routing, BOQ, lead engineers and drafters.

Able to understand and manage the following:
Subcontractor's submission of 66kV, 6.6kV & LV power supply system including; Power Generation System, transformer, UPS & DC systems.
Electrical Single Line drawings
Power system Analysis by ETAP
Protection coordination
Cable Size calculation
HV, MV and LV motor starter system
UPS & DC system
Solar generation system
Power Management System
Plan & coordinate Electrical Room layout
Plan & coordinate Cable tray and Busduct

Familiar with the following Equipment and System:
Generators
Circuit breakers
Transformers
VSDs
Busducts
Civil interface for switchboard installation, pull pit and penetration.

Requirements

• At least 10 years of relevant experience as Leader or Senior Electrical Engineer in EPC projects.
• Bachelor’s degree in electrical engineering or equivalent
• Leadership & people management skills
• Familiar with industrial standard, e.g, ISO, IEEE, and etc. and Singapore standard, e.g. SS638
• Familiar with statutory Regulation or Code, like Singapore transmission code. etc.
• Able to work in collaboration with various disciplines
• Able to interface seamlessly with engineering, construction, and operations contractors
• Able to work on-site in construction environment

Work location: Tuas Nexus

ROLES & RESPONSIBILITIES

• To be responsible for all deliverables required in the agreement with Singapore General Hospital.
• To organize his team to align with the overall client’s expectation and contractual requirements andsupport the operations of the hospital, especially in the front end engineering and customersupports. To plan and execute all fix it and programmed maintenance within the frame work of theallocated resources.
• To plan the resources available to align with the operational requirements for fix it and programmedmaintenance.
• Managing all minor repairs and fix it work within the budget.
• Work closely with other service providers in the hospital to be part of the team to create a safe andsound environment for the patients, staff and visitors, especially ISS House Keeping and Portering team to demonstrate the strength and capability of ISS’s integrated service model to be productive, efficient and effective.
• Constantly engaging the client and end users to seek feed back, gaps and improvementopportunities through survey and dialogue.
• Responsible for overall customer and end users relationship management while exercising costcontrol monitor and measure with the awareness to generating additional works to enhancemargin.
• To stabilize the team during upon operations and continued to seek improvement in theorganization structure and operations process to improve supports to the hospital.
• Manage relationship with all specialist sub-con and contractors appointed by the hospital toachieve the required KPI, client’s expectations and deliverables in the contract with SingaporeGeneral Hospital.
• Be part of the team to management energy saving and initiatives.
• Identify engineering issues and trouble shooting to response to end users’ request. Resolving andmitigating potential engineering problems and potential cause to system breakdown. Work closelywith the Central Operations to tackle engineering problems.

JOB REQUIREMENTS

1. Contractual fulfilment of ISS for the outsourced facility management contract

2. Compliance of all statutory requirements

3. Successful mobilization

4. Achieve financial margin set by the management

5. Motivation and leadership of the outsources facility management team

6. Meeting KPI requirements and meet customers’ and end users’ expectations

7. Healthy QEHS records

8. Provide an safety environment to enhance the patient’s staff’s and visitors’ experience

• Develop and implement maintenance schedules for machinery and equipment.
  Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
  Liaise internally between operations teams to address machinery breakdowns and operational concerns.Coordinate data collection on auxiliary materials from operations teams and report on a weekly basis.
  Manage receipt, maintenance, and monitoring of machinery parts inventory.
  Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.Undertake additional tasks as required to support operational needs and project requirements.Preferably with at least 3 years of working experience in related field.
• Comfortable working in Workshop environment.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

THIS IS A 2-YEARS RENEWABLE / CONVERTIBLE CONTRACT ROLE

The Centre Management System Support, Executive/Senior Executive is responsible for overseeing the upkeep, procurement & maintenance of all exhibits, audio-visual equipment, facilities and essential services for daily operations for centres/museums under Defence Collective Singapore (DCS).

RESPONSIBILITIES

• Maintenance Planning: Planning and implementation of building maintenance programs for architectural, electrical, and mechanical, exhibits and attractions AV lighting systems. Co-ordinate and liaise with internal and external vendors for the execution of maintenance services. Conduct joint inspection rounds with Specialists/Technical Officers on building/Exhibit/AV & lighting defects.
• Safety Compliance: Ensure compliance with safety equipment, work methods, and procedures. Promptly rectify any unsafe situations, adhering to Workplace Safety and Health (WSH) regulations. Be responsible for implementing Company’s SOP and policies including compliance to QEHS policies. Conducting regular checks on the entire building to ensure the prompt removal of fire hazards, proper functioning of fire escapes, fire doors, and obstruction-free access.
• Supervise Works: Control and supervise all AV Lighting and exhibition related works performed by Specialists/Technical Officers and contractors, including those carried out by tenant's fitting out contractors. Supervise and inspect the works of contractors and the works of the service providers (cleaning, housekeeping, landscaping, pest control, car park and security). To ensure contractors’ compliance to safety, regulations and level of standards set by DCS.
• Repairs and Emergency Situations: Responding to emergency situations & troubleshoot sound and video and ensuring prompt repairs of property facilities. Providing updates to Centre Management team with regards to the situation.
• Procurement: Manage budgetary control of expenditures including preparation of annual budgets and forecast. Conduct tender exercises for OPEX/CAPEX works such as replacement, upgrading or redevelopment works and manage such works according to timeline including putting up of documents and procurement for OPEX/CAPEX requests.
• Daily Operations: Responsible for the coordination of meetings and events such as logistics support, obtaining quotations, raising of invoices etc. Conduct regular inspection of the centre to ensure high standard of cleanliness and service are provided by term contractors related to cleaning, landscape, pest control etc.
• Reports: Monitor and report on the work progress of minor improvement projects or A&A work. Tabulate inspection report and plans for defects rectification.
• Project Management: Procurement of services as well as management of services and projects from inception, execution and to completion. Project lead to manage all aspects of project.
• Event Management: To provide audio, visual and media services for events and activities (e.g. Family Day, celebrations, etc). To help staff (hands-on) on setup of technology in the venues.
• Others: provide training to staff and students on the use of AV and lighting equipment, carry out any ad-hoc duties, handyman work, projects as assigned.

REQUIREMENTS

• Minimum diploma in the audiovisual technology, sound engineering, lighting design technology or any related field, such as digital media or related disciplines.
• Demonstrated ability to communicate effectively, including proficiency in clear, concise, and compelling oral and written communication in English.
• Demonstrated ability to work independently and under pressure and to manage multiple concurrent tasks and responsibilities while dealing with changing priorities.
• Possess strong working knowledge with maintenance work, local codes and regulations. Familiar with statutory requirements on building services, facility operations, maintenance, and safety.
• Withstand various strenuous activities such as frequent walking, prolonged standing, climbing ladders, bending, and kneeling without restriction.
• Able to work on rotating shifts, weekends, and public holidays.
• Relevant experiences in facilities management/MCST, ACMV, M&E Systems, building automation system (BAS), Certification as Fire Safety Manager will be an added advantage.

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

Job Descriptions:

* Site coordination, Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Involve in Project planning, electrical & control, instrumentation / sensor, programming, Testing and Commissioning, Service and Maintennace, Documentation and Training

* Experience in AutoCAD drawing or equivalent will be added advantages

* Ad-hoc engineering support when required.

* Willing to work on fast pace environment.

* Willingness for standby duties or work after office hour or during weekend / Public Holiday

Job Requirements:

* Relevant graduate diploma for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance.

* Fresh graduates are welcome.

* Hands on experience in automation system implementation and support.

* Experience in programming, site coordination and support

* Electrical, instrumentations and control knowledge

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

- Managing a part of the construction

project

- Assist in technical advice and supervision

for other members of the staff

- Planning day to day work program of the

project progress

- Ensure projects meets agreed

specifications, budgets as well as

timescales

- Authorizing technical drawings and

engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed

property from start to finish

- Good communications skills

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

Location of Work : Jurong Island

The Resident Engineer shall be the Customer’s main point of contact on site in relation to the Long-Term Service Agreement (LTSA) and shall act as a technical representative of Mitsubishi Power (MPW) in relation to operation and maintenance of the Gas Turbine Combined Cycle (GTCC) Power Plant located in Jurong Island, Singapore.

The Resident Engineer needs to have strong technical knowledge in Gas Turbine Combined Cycle Power Plant. The role requires analyzing operational data to investigate various operation problems on turbines and auxiliary systems, trouble shooting a diverse range of problems that occur during operation and/or maintenance. With the support from the Singapore office and the Service Engineering Head Office in Japan, the Resident Engineer needs to be capable of providing solutions on an urgent basis.

The Resident Engineer must have experience completing Gas Turbine Combined Cycle Power Plant outages successfully and know how to coordinate with various internal stakeholders, vendors, technical advisors and local labour. The Resident Engineer must establish and maintain good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

The Resident Engineer shall be stationed at the site in Jurong Island during normal working hours (8 hours per day, 5 days per week, excluding public holidays), and at times when there is a substantial risk of Power Train operation interruption due to problems arising from the Power Train. As the Power Plant provides essential services, in the event of an emergency, the Resident Engineer shall be required to reach the Power Plant within specific required timeframe based on the service agreement with the customer, upon activation by the Customer to support the efficient recovery of the power plant.

Technical Support

The Resident Engineer shall act as the Customer’s interface for the flow of information to and from the Singapore office and Service Engineering Head Office in Japan. Such activities include but are not limited to:

· Establishing and maintaining good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

· Responding to and resolving internal and external customer requests for technical issues concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of technical product knowledge and analytical skills while adhering to sound engineering principles, standards, practices and procedures.

· Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.

· Proactively identifying potential failures, assessing and controlling operational risks with support from the 24/7 remote monitoring hub and expert support

· Proactively advising and assisting the Customer in planning and executing relevant maintenance activities and coordinating with the Customer and MPW for the preparation of planned and unplanned inspection activities.

· Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance · against the contractual guarantees and obligations. If necessary, recommend corrective actions.

· Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.

· Reviewing and presenting the inspection findings and outage reports to the Customer.

Maintenance Work Coordination

The Resident Engineer shall be responsible for coordinating all activities provided by MPW under the LTSA, including but not limited to:

· Collaborating with the Customer, various MPW group resources (E.g. LTSA Program Manager, Technical Advisors, Field Services, Engineering) and Local Vendors (E.g. Labour, Onsite Machining, Local Workshop or other Third Party Services) in order to achieve the common goals with the Customer including but not limiting to health and safety, environmental protection, customer satisfaction, unit availability, reliability, performance and emissions

· Presenting and discussing with the Customer the scope and the planning of Planned/ Unplanned Maintenance

· Actively contributing in maintenance planning meetings, pre-outage and post-outage meetings between the Customer and MPW, confirming repair status with Repair Facilities.

· Supporting the Customer in the selection of spare parts to be kept on stock, aiming to increase the timely availability of necessary spare parts while optimizing inventory costs.

· Helping the Customer in selecting tools and equipment required for maintenance of the Covered Equipment.

· Coordinating dispatch of Parts and Technical Advisory Services

Troubleshooting/ Failure Investigations

The Resident Engineer shall be responsible to lead and/or support the troubleshooting of a diverse range of problems that may occur during Plant operation and/or Planned or Unplanned Maintenance, with the support from the Singapore office and Service Engineering Head Office in Japan. Such activities may include but are not limited to:

· Conducting fact-finding and communicating failure data between the Customer and MPW

· Analyzing operational data to investigate various operation problems on the Power Train and Auxiliary systems and suggesting necessary actions.

· Leading or supporting root cause analysis to determine the original cause of failures that led to plant trips or unplanned maintenance.

· Investigating problems that have occurred during maintenance works and be capable of providing solutions on urgent basis.

· Summarizing findings and conclusions in clear, logical and easily understood reports for external customers or internal departments.

Pre-requisites

Education level and relevant experiences

· Diploma/Degree in a relevant engineering or technical field

· More than 10 years of proven related work experience in the Power Industry

· Previous site work experience in Long Term Service Agreements, field service or maintenance and overhaul of CCGT power plants or industrial plants rotating equipment is preferable.

· Previous customer facing experience where there is regular interaction with plant personnel to provide support and resolve problems.

Knowledge and skills

· Knowledge of Gas Turbine Combined Cycle Power Plant Equipment operations and maintenance.

· Good communication skills.

· Able to develop and write clear and concise technical instructions, reports, specifications and recommendations.

· Able to work in a multidisciplinary team with people from different cultures and nationalities.

· Good Knowledge of MS Office software (Word, Excel & PowerPoint)

· Industry standard training courses on NDT, Machinery Diagnostics, Lubrication, Automation, Quality Control, Metrology would be an added advantage.

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

SINOTCC, an Engineering, Procurement and Construction (EPC) firm specializing in PROCESS and GENERAL CONSTRUCTION, is looking for a suitable candidate to fill up the role.

- Bachelor Degree in Engineering (major in HVAC, Mechanical, Electrical, Instrumentation).

- At least 5 years experience working in the Process & Construction Industry

- Independent, hardworking and self-motivated

- Willing to travel overseas (if needed)

- Willing to work over time

- 5.5 days work week

- Salary Negotiable