Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

MAIN RESPONSIBILITIES:

The Field Service Engineer is responsible for providing technical field assistance in maintenance, operation, equipment installation and startup and/or shutdowns for all CPM processes. The Field Service Technician must have strong business and communications skills to establish and maintain strong relationships with the customer. Analytical and problem-solving skills are just as essential to this position.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Provide technical field assistance, in maintenance, installation, operation, and startup for CPM equipment; prepare customer field report after each trip.

· Perform inspections of existing CPM equipment during plant shutdowns, assist plant/contractors with recommended repairs/parts and provide each customer with a field report.

· Evaluate fabricated product when asked; prepare non-conformance report when necessary and work with internal and external customers to resolve issues.

· Provide technical training to relevant customer and responsible for tracking customer claim.

· Work integrally with internal employees and external customers to promote the CPM Aftermarket service, to meet group initiatives and objectives.

· Assist contractors in the erection of CPM equipment at customer site.

· Identify customer's needs and sales opportunities to help future growth.

· Participate in company meetings in order to increase communication, understanding, and teamwork.

· Cross train with engineers/technicians to learn technical processing information.

· Observe all customer and OSHA safety rules.

· Perform other related duties as required and assigned.

QUALIFICATION AND SKILLS:

· Associate degree or equivalent from a two-year college or technical school, preferably in Engineering.

· A minimum of 2 years of experience in animal feed or biomass related manufacturing industry.

· Good written and verbal communication skills.

· Establish and maintain effective working relationships with co-workers, customers, and vendors.

· High integrity and ethics.

· Working knowledge in AutoCAD.

· Required knowledge of Microsoft Office.

· Be able to communicate in English fluently and at least one local language.

· Ability to travel on need basis – domestically or internationally and up to 50% of the time.

Responsible for civil and steel structures scopes for building construction works.

- Study tender / construction drawings, specifications, contracts scope of works to understand project requirements.

- Plan, schedule work sequences, prepare Microsoft Project for all task and micro-schedule form throughout the project.

- Perform site inspection and ensure that the work is carried out based on the project specification and construction drawing, consultant, and authority requirement.

- Liaise and coordinate with consultants, client, main contractor, other contractor and authority.

- Provide guidance to supervisors in relation to construction works, ensure progress according to schedule.

- Ensure project is executed according to micro-schedule and timeline.

- Resolve all engineering, technical and project queries from time to time.

- Prepare a report and method statement whenever necessary.

- Prepare progress report, handover report, meeting minutes, TOP/CSC documentation, and other requirement request by client and authority.

- Any other ad-hoc duties assigned related to project

Requirements:

- Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Civil / Structural or equivalent.

- Candidate must possesses Civil, Architectural, Steel Structures and/or related experience.

- At least 3 Year(s) of working experience in the related field is required for this position.

- Required Skill(s): Autocad, Microsoft Office, Microsoft Project.

- Able to work on Saturday.

Job Description:

MAINTENANCE & ENGINEERING

• Plan and carry out preventive maintenance throughout the hotel to ensure standards are maintained for guest comfort.
• Prioritise and carry out maintenance as requested by Departments on a daily basis to ensure the smooth running of all hotel departments.
• Motivate and develop the Engineering team to reach to their fullest potential.
• Ensure guest-centric approach to works, schedules with priority placed on services which impact guest satisfaction.
• Liaise and work closely with the MCST and FCC to ensure smoother operations and consistency in approach.
• Record meter readings and liaise with the Executive Assistant Manager regarding options to improve energy management and conservation.
• As a Fire Safety Manager, be responsible for the testing of fire alarms, emergency lighting etc. on a routine basis as required by local Council and Fire Service.
• Liaise with the Body Corporate with regards to maintenance issues and re-charge labour and materials at agreed rates
• Ensure compliance with all legislation, including Health and Safety and Environmental.
• Liaise with the Executive Assistant Manager regarding use of contractors within the Hotel, controlling expenditure and ensuring work is to the standard required by the Company and manufacture specifications.
• Ensure the cost effective and hygienic removal of rubbish from the hotel areas and monitor to ensure areas are clear and free of offensive odour.
• Be available to carry out emergency maintenance work outside of normal working hours, as required for: full power failure, evacuation fire system re-set and / or failure of mechanical systems.
• Maintain records of repair work and daily checks as required by local Council, Government and Manufacturer specifications.
• Liaise closely with all departments regarding ‘down’ rooms to expedite a quick turn around and return to inventory.
• Ensure the external areas of the hotel are neat and tidy and maintained in line with Company brand standards.
• Research, recommend and liaise with the Executive Assistant Manager regarding procedures to improve the overall efficiency of the department and to carry out project work/prepare reports as requested by the Executive Assistant Manager.
• Support the co-ordination of safety and security/risk management programs via third party providers
• Work with the operational Department Heads team to ensure InterREACT tracking and compliance
• Ensure health, safety and welfare of all ambassadors is provided for through implementation of integrated occupational safety and health program.
• Give guidance to the effective operation of the WHS Committee.
• Ensure all ambassadors are competent in the safe and effective use of equipment and chemicals in accordance with the manufacturer’s instructions.
• Attend and actively participate in daily meetings respecting the confidentiality of issues which may be discussed formally or informally.
• Prepare monthly Engineering reports, commenting on key performance indicators and action taken to keep on target.
• Adherence to Emergency Communication procedures ensuring that enquiries from the media are only responded to by the nominated spokesperson.
• Strive to implement the AccorHotels Vision and demonstrate active use of AccorHotels Values.
• Any other reasonable request within your range of competence as required by Management.

The role will work as a member of the Global Cybersecurity organisation - Security Architecture team, which is focused on improving technology and architecture decision-making through collaboration with management, staff and customers on technology strategy, enterprise architecture, and investments in strategic security technology.

The individual, with a broad cybersecurity plus systems and network architecture knowledge and experience, will deliver security assessments while supporting our direction, lifecycle management and leadership for security architecture and technology. The individual will perform a key role in Security assessments while supporting various critical initiatives through the identification, analysis, evaluation, lifecycle management and adoption of security architectures and technologies. The Security Architect will work closely with other security functions and will provide guidance to ensure that there is coordination with their activities in technology choices. In addition, the Security Architect will be involved with education and mentorship, supporting the delivery framework, development of technical architecture and associated documentation, as well as advanced topics of research.

Essential Functions:

• Be a product security champion by driving Security Architecture and Design, implementation and optimization for Web, API and Mobile backend applications across Visa.

• Applying security design principles to develop security solutions architectures

• Engage in the initial requirements definition including analysis of threats and risks and alignment with Visa security, Engineering, IT and Architecture standards.

• Conduct and facilitate security reviews, threat modelling including deep design reviews throughout the development lifecycle.

• Facilitate 'table-top'/red-team/scenario analysis exercises in conjunction with other SMEs. Plan the resolution of any identified vulnerabilities/issues.

• You’ll be working on enabling/building security controls which protect the applications from attacks on various platforms and technologies, like:

  • Linux, Windows, VMWare, Openstack, SDN, Public cloud like AWS, Google

  • Cybersecurity tools like IDS, SIEM, Tripwire, Tanium, Netwitness, Netflow, WAF

  • HSMs, Tokenization systems, data encryption solutions from Safenet, Vormetric etc

  • Web technologies like HTTP, SOAP, REST services, AJAX

  • Databases like Oracle, MS SQL, Redis, Cassandra

  • Programming languages like Java, C, C++, .Net, Javascript, GoLang, ErLang, etc

  • Caching services like Hazelcast, Coherence, and messaging systems like Kafka, MQ

  • Web Access Management solutions like Forgerock, Siteminder, Custom/in-house Security Frameworks

• Help business and product team to achieve various compliance certifications like PCI, FFIEC  etc.

• Identify and analyse system and application level vulnerabilities to provide recommended counter measures or mitigating controls that reduce risk to an acceptable and manageable level.

• Driving security technologies evaluations, proof-of-concepts, and production pilots

• Building strong cross-organisational relationship through integration with the teams, in order to effectively influencing staff across the IT organisation and product groups

• Managing the lifecycle of security technologies

• Staying current with security technologies, as well as development techniques and methodologies in order to make recommendations for use based on business value

• Maintaining oversight of the design and implementation of IT systems to ensure appropriate and effective security controls are included.

• Contribute to the definition of overall IT architecture from a cybersecurity lens.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Description:

• To improve and optimize the manufacturing processes and practices.
• To oversee design and installation of new process equipment, e.g. bottle/drum filling lines, storage/blending tank installation.
• To participate in new product introduction project.
• To carry out maintenance on the factory facilities and production equipment.
• To spearhead and maintain the environmental and safety management system.
• To take charge and oversee the jetty operation.
• To provide technical training.
• To perform any other works as required and assigned by superior.

Requirement:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Chemical), Engineering (Mechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position.
• Preferably Executive specialized in Engineering - Chemical or equivalent.
• Workplace Safety and Health level B or higher.
• Port Facility Security Officer an added advantage.
• Certified Internal Quality Auditor an added advantage.

How to Apply:

Interested applicants may apply by sending in the following:

1. Updated resume
2. Short description of experience
3. Reason for leaving prior jobs
4. Current and expected salary

We regret to inform that only shortlisted candidates will be notified.

Job Description:

• Review and coordinate detailed civil/ structural/geotechnical design.
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities.
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works.
• Assist to check on the design calculations.
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractors design teams to ensure prompt resolution of all design related issues arising from the reviews of the Temporary and Permanent Works.

Job Requirements:

• Degree in Civil/ Structural/ Geotechnical Engineering or its equivalent.
• Minimum 2 years relevant experience in Singapore.
• Good exposure in the analysis and design of civil works or soil-structure interactions.
• Good knowledge of the various engineering design software and analytical tools.

Responsibilities:

• Design of heavy structures made of aluminium alloy
• Liaise with clients, vendors and third parties on technical issues
• Cooperate with project team on the project planning and execution
• Supervise/check the design drawings and material take-off
• Perform structural analysis and prepare structural analysis report

Requirements:

• Degree in structural/marine/naval architecture/civil/ engineering
• Min. 5 years experience in structural design in offshore/marine/civil industry
• Strong technically and competent in structural design and analysis
• Familiar with and experience in international structural design codes, standards and project specifications and structural design software packages
• Experience in aluminium design is not required as training will be provided
• Good written and spoken English
• Come and convince us why you are the best person for the job

Install, service, and maintain of

Bolding machines. (TBM)

- Electrical Wiring

- PLC Based control system

- Motor control systems

Pump system

- Motor installation and Repair

- Commissioning

Filter Press Machines

Decanter Centrifuge Machines

Verify lighting installations against design specifications and drawings.

Determine load balance and distribution to ensure optimal electrical system performance.

Create single-line diagrams for household electrical wiring systems. (troubleshooting & repairing)

Install and commission household electrical systems and equipment.

Perform power calculations and distribution analysis for substation design and operations.

Conduct high voltage testing on equipment prior to operation.

Provide technical support on electrical system & equipment to project team.

Other adhoc duties to support project team.

PERSONIL SKILL

- Highly organized and efficient

- Excellent communication and fluency skills

- Strong work ethic and willingness to learn

- Quick learner with adaptability

- Proven leadership abilities

- Self-motivated and results-driven

- Independent worker with excellent teamwork skills

Install, service, and maintain of

Bolding machines. (TBM)

- Electrical Wiring

- PLC Based control system

- Motor control systems

Pump system

- Motor installation and Repair

- Commissioning

Filter Press Machines

Decanter Centrifuge Machines

Verify lighting installations against design specifications and drawings.

Determine load balance and distribution to ensure optimal electrical system performance.

Create single-line diagrams for household electrical wiring systems. (troubleshooting & repairing)

Install and commission household electrical systems and equipment.

Perform power calculations and distribution analysis for substation design and operations.

Conduct high voltage testing on equipment prior to operation.

Provide technical support on electrical system & equipment to project team.

Other adhoc duties to support project team.

PERSONIL SKILL

- Highly organized and efficient

- Excellent communication and fluency skills

- Strong work ethic and willingness to learn

- Quick learner with adaptability

- Proven leadership abilities

- Self-motivated and results-driven

- Independent worker with excellent teamwork skills

Job Responsibilities

• Assist in the design, build, wiring and testing of R&D prototypes.
• Sourcing of components, materials, etc.
• Liaise with vendors & suppliers on technical issues.
• Hands on troubleshooting and maintenance of existing systems.
• Perform other ad hoc duties as requested by management.

Job Requirements

• Diploma or Degree in Mechatronics/Electrical engineering.
• Entry level will depend on applicable skills and experiences.
• Must be able to comprehend electrical schematics and wiring diagrams,
• Hands-on experience in mechanical work would be an advantage.
• Able to work with minimal supervision and keen on learning new technologies.
• Team player and motivated to succeed.
• Fresh graduates with strong interest may apply as Assistant Electrical Engineer.

Electrical Engineer

Job Responsibilities:

• Design control systems.
• Preparation of drawings for customer approval.
• Preparation of drawings/BCM for shop floor production.
• Co-ordinating with clients, consultants and internal departments.
• Drafting work with the use of CAD system (AUTOCAD/SOLIDWORKS).

Requirements:

• Diploma or Bachelor’s Degree in Electrical Engineering.
• Hands-on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.
• Excellent analytical thinking and problem-solving abilities.
• Team player and good communication skills.
• Physically fit and able to work in strenuous circumstances.

Job Responsibility

• Design, develop and maintain software for in-house designed parking system and /or automation solutions
• To provide adhoc remedial repair service as required by customers
• Meeting desired Service Level that is expected of from the customers/sites assigned
• PC software/system development for parking system / automation solutions
• Responsible for system design, support and recommend improvements and customization to conventional systems
• System integrations
• Product maintenance and customer services
• Microcontroller firmware development
• Study customer’s requirements implement new features for products improvement.
• Support system and service works on site as required. Choose best approach based on available resources for system development
• Brainstorming for ideas on creating or acquiring new resources
• Analyze the system symptoms or performance of system and make appropriate recommendations or solutions
• Implement or execute solutions to address feedbacks received

Job Requirement

• Minimally a Technical Diploma/Degree in Computer Science, Software Engineering, Electronic Engineering or its equivalent.
• At least 1 year of relevant experience relevant industry
• Knowledge in SQL skills and management
• Knowledge in coding skills such as C & Python
• Strong knowledge and experience in Visual Basic (VB.NET), WPF, C#, and/or ASP.NET
• Database knowledge such as MS Access, MSSQL
• Ability to discuss highly technical concepts
• Strong verbal, written, and interpersonal skills

Working Location : West side, near Pioneer MRT

Job Highlights

• On-the-job training and coaching.

• Immediate Hiring

Job Description

Job Responsibilities:

1. Participate in the design, implementation, and test of firmware systems for logistics automation.

2. Manage lab equipment and conduct PoC (Proof of Concept) tests for potential customers.

3. Work with colleagues in Korea and China to maintain and continuously improve system demonstrations at the Singapore lab.

4. Assist to manage the implementation of automation projects according to customer requirements.

5. Supervise project implementation and manage contractors, to maintain project schedule.

Qualifications / Skills:

1. Diploma or Bachelor of engineering in mechatronics, mechanical or electrical engineering, manufacturing, or other related discipline required.

2. 1~3 years of PLC programming or robotic programming.

3. Training will be provided.

4. Experience in logistics automation systems will be an advantage.

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 2 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

· Managed project lifecycle from BOM creation in SAP B1 to overseeing commissioning and handling after sales enquiries.

· Provide technical field assistance, in maintenance, installation, operation, and start-up for all CPM equipment; prepare customer field report after each trip.

· Assist customers service and the sales team, providing technical and process information for after-market sales.

· Coordinate customer service and purchasing department for after-market sales and delivery.

· Regular visits the prospects, customers, and agents to provide technical advice and generate sales opportunities.

· Maintain and analyses records of opportunities, quotes and contacts and knowing how to act on them.

· Engineering design & improvement of current parts

· Perform equipment assembly related task (quality check on incoming items, urgent assemblies, electrical I/O and PLC)

· Perform other related duties as assigned

QUALIFICATION AND SKILLS

· Bachelor’s degree in engineering (Mechanical Engineering preferred), or equivalent 5 years relevant working experience

· Ability to travel as needed. up to 30-50% possible.

· Customer service, sales support, or project management experience a plus

· Experience with ERP systems (SAP Business One is preferred), Excel, CAD (AutoCAD & Inventor is preferred)

Job Overview:

The Applications Engineer (AE) represents technical aspects of business development and project definition. AE is responsible for providing full technical support for Business Development/Sales of all Anaergia Projects from the origination phase through contract negotiation and hand over to Anaergia Project Execution Team with all required specifications and budget development. Consistently manage the assigned engineering activities in preparing project documents in compliance with project schedule and observing the correctness and the completeness of the provided information.

The AE’s goals can be summarized as follow:

· Design phase: providing technical support to the Sales Team by assessing technical information and develop conceptual/preliminary design of integrated solutions for projects using both Anaergia and third party technologies.

· Proposal phase: Cost and price calculation using Anaergia tools and basing design on Anaergia Design Manual recommendations, lessons learned and best practices

· Provide technical documentation and cost data for the Contracts, Sales, and Marketing teams and help negotiate technical issues at customer level.

· Permanent support to Sales during the proposal phase interfacing with client, client engineers, subconsultants, contractors and permitting agencies as required.

· Quickness and flexibility in responses to urgent questions from project managers, project Engineers and sales managers.

· Provide integrated view of the project and forge strong links between all internal and external project stakeholders to ensure a consistent and coordinated technical approach for all projects.

Job Responsibilities:

The AE’s tasks includes:

· Provide technical and commercial support and product advice for existing and future product portfolio within the areas of solid waste treatment, anaerobic digestion, biogas utilization, nutrient recovery and wastewater treatment.

· Develop Front End Engineering Documents (FEED) including Block Flow Diagrams (BFD), Process Flow Diagrams (PFD) and Process & Instrumentation Diagrams (PID) and general arrangement drawings during bid development and project development as necessary.

· Liaise and develop new Asian vendor database.

· Review and appraise customer specifications and provide summary notes including the specification’s alignment or otherwise with Anaergia’s Products and Technologies.

· Design systems, including biological processes using existing tools and process blocks in coordination with the Global Process Engineering Team.

· Process customer inquiries and orders; Analyze customer requirements and development of offers in close consultation with the Sales Team; Obtain, compile and process information about competitors and the market.

· Prepare proposals and price calculation according to the company guidelines and the implemented processes; Request quotations from defined and selected subcontractors and pre-negotiate the received quotes.

· Actively participating in Offer Preparation during the proposal phase to note any deviations; Participate in finding solutions in coordination with internal manufacturing departments and the sales manager.

· Compile all relevant technical documents for the proposal and / or for the contract.

· Support Sales department in request phase for pre-qualifications.

· Record all project relevant documents and costing data on the within the database.

· Perform continuous maintenance of costing data base in conjunction with the Global Applications Team.

· Support and coordinate preliminary design activities during project development of Anaergia Build Own Operation Business including site/civil, electrical, mechanical, structural as well as permitting and grant application activities as necessary.

Job Requirements:

Education and Experience

· Holds a bachelor’s degree in: Chemical Engineering / Mechanical engineering/ Environmental Engineer/ Residential water management or another high technical education or equivalent with a focus on municipal and environmental engineering.

· Fresh graduates are warmly welcomed. 1 to 3 years of working experience as an Applications Engineer or Process Engineer within the Industrial Plant business, preferable in solid waste treatment, wastewater treatment is considered highly advantageous.

· Understanding of all MS Office tools and ability to adapt to new digital tools.

· Basic understanding of process plants including chemical processes.

Technical Skills

The AE has the following technical skillsets:

· Good understanding of basic processes like wastewater treatment, biogas, anaerobic digestion and/or municipal solid waste (will be preferred).

· Understanding of mass and energy balance, equipment sizing.

· Ability to use MS office tools, AUTOCAD software (will be preferred).

The AE has the following Key Personal Attributes -

· Excellent interpersonal skills and a positive attitude to get things done.

· Passionate, highly driven, and hard-working, portrays an Entrepreneurial spirit, a great team player and gets things done. Has the ability to self-start tasks without dropping the ball waiting for responses from others. Inquisitive, solutions oriented. “Can do” attitude

· Always reading on new technologies, technically deep and detail oriented.

· Team player, humble. Meets promises internally and to external clients and project stakeholders and participants

· Aligned and motivated by our company Mission.

Duties & Responsibilities

• Prepare the equipment list
• Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries
• Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries
• Prepare the requisition and RFQ documents for vendor enquiry
• Prepare the technical clarification and technical bid evaluation of vendor proposal
• Review and check the drawings, designs specification, materials and equipment from vendor for conformity with project technical requirements
• To liaise effectively with vendor and inter-departments to resolve engineering technical issue
• To resolve and response to client comment.
• Prepare information drawing for interface design work whenever is necessary
• Prepare bill of material for cost estimation of bid project
• Provide engineering support for the equipment installation and commissioning activities at site
• Provide engineering support for maintenance works.
• To carry out any other duties as and when assigned by the immediate supervisor or principle engineer

Qualification & Experience Generally Required

• Bachelor Degree in Mechanical Engineering or its equivalent
• Min. 1 to 2 years engineering knowledge in mechanical disciplines in Oil & Gas and Petrochemical industries.
• Experienced in equipment engineering specifications and standards
• Familiar with industrial standards and local codes
• Strong communication skills and the ability to stay organised and multi-task
• Proficient in using MS Word, Excel, Autocad

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Job Info:

• Basic: $3000 - $4000 + Phone Allowance + OT + Performance Bonus
• Working Hour: Monday - Friday (9am - 6pm)
• Location: Tampines

Job Scope:

• Take the lead on AV initiatives and provide input for project procurement
• Offer expert advice on project plans and layouts
• Assist in the procurement of AV hardware and software, ensuring project needs are met
• Plan, maintain, and monitor project timelines, intervening when necessary, and managing equipment storage and transportation
• Perform rack and stack, onsite installation, upgrades, troubleshooting, and repair of AV equipment, networking, and other in-house projects at customer premises
• Complete electrical wiring, trunking, programming, and basic construction setups (may require the use of a ladder)
• Manage, test, and commission CCTV, door access, ELV equipment, Bluetooth devices, and other necessary devices
• Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects
• Liaise with clients to understand their requirements
• Conduct quality control analysis prior to events
• Diagnose and resolve technical issues, both hardware and software, as needed
• Respond to service calls related to equipment breakdowns
• Provide on-site support and user training at end-users' premises.
• Ensure production and updating of documentation such as user guides, etc
• Follow up with the finance department regarding costing and billing

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

Improved JD:

• Oversee the maintenance, monitoring, and uptime of EV charging stations to ensure seamless customer experiences. Lead a service team.

• Manage the lifecycle of technology assets, including chargers, software platforms, and network security, ensuring system reliability and scalability.

• Establish and implement SOPs for troubleshooting and preventive maintenance, optimizing network performance.

• Implement data analytics solutions to monitor and analyze charging station performance, driving continuous improvements in operational efficiency.

- Collaborate with key vendors, suppliers, and partners to secure and manage essential hardware, software, and support services. Oversee the design, testing, and implementation of new chargers, including setting up Router, LAN or SIM. Set up API.

- ⁠Ensure that all technology solutions comply with local regulations and industry standards for safety, environmental impact, and cybersecurity.

• Oversee the implementation of cybersecurity protocols to protect customer data and infrastructure from potential threats.

- Work closely with the customer support team to address technical issues and improve customer satisfaction.

• Evaluate and manage relationships with Factory & technology providers, ensuring cost efficiency and quality.

Purpose Statement:

• Ensures reliability and mechanical integrity of equipment for processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance.
• Develops engineering solutions for repetitive failures and all other problems that adversely affect plant operations including capacity, quality, cost or regulatory compliance issues.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items

Major Responsibilities:

• Ensures reliability and maintainability of equipment, processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance
• Lead and drive mechanical integrity program in compliance with regulations
• Take a lead to troubleshoot equipment reliability issues and carryout RCFA for the repeated failures and failures that has an impact to production, quality and safety.
• Lead RCM studies for critical assets/systems and implement the action items generated.
• Run online/offline condition monitoring program site wide.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items.
• Works with project engineering teams to ensure reliability/ maintainability of new/modified installations.
• Perform analysis of asset performance including: Asset utilization, Overall equipment effectiveness, remaining useful life and capital replacement plans as well as other parameters that define Site MEP KPIs such as availability, maintenance performance, reliability and R&M costs of assets.
• Develop SOPs, equipment job aids, checklist to assure no equipment reliability issue after repair work.
• Evaluate content of maintenance plans in CMMS including methods, maintenance frequencies and spare parts needed

Qualifications:

Education

• A bachelor’s degree or a diploma in Mechanical engineering discipline.

Experience

• Mechanical engineering degree with at least 5 years work experience or a diploma with a minimum of 15 years of relevant work experience in pharmaceutical/ biological/ chemical/ oil & gas industries.
• Experience driving RCM studies and RCFA
• Experience/Knowledge in Asset Integrity Management
• Sound technical knowledge coupled with hands-on experience in maintenance of processing equipment

Skills

• Comfortable working in a team and matrix environments with high degree of initiative and self-motivation
• Scientific approach to solving problems and makes data-based decisions.
• Keen in driving and adopting new technologies.
• Knowledge of CMMS, Reliability, and proficiency in MS Office products (Excel, Outlook, PowerPoint, Word, Project)
• Knowledge on vibration analysis, RCM and RBI
• API 510/570/580 certification will be an added advantage
• Good written and oral communication skills
• Interpersonal skills and a "hands-on" attitude
• cGMP experience is a plus

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.