Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills

To be able to read and understand hydraulic schematic

To have hydraulic troubleshotting knowledge

To be able to work onsite independently

To work with a team of service engineer and technician

To know how to repair hydraulic cylinders, pump and hydraulic power unit

Simple design of hydraulic system is an advantage

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Lead and supervise a group of Technicians/Technical Assistants and manage contractors in the execution of refinery maintenance activities.
• Implement reliability programs and develop maintenance procedures for instrumentation & electrical equipment to facilitate consistent execution of maintenance tasks.
• Investigate instrument & electrical equipment failures or malfunctions in order to identify root causes of problems as well as recommend and implement solutions.

• Degree in Electrical and Electronics Engineering.

• 2 years' relevant experience in oil refinery/petrochemical or related industries. Candidate without relevant experience may be considered for entry-level position.
• Knowledge of DCS, PLC and ESD systems is preferred.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Duties and Responsibilities:

• Supervision, executing and coordinate project activities.
• Ensuring that the project is on-schedule, within budgeted cost, and quality standards.
• Review project plans, specifications, and drawings to ensure accuracy and feasibility.
• Coordinating with Clients and Suppliers to develop project schedules, and resources plans.
• Attending Clients coordination and technical meetings.
• Supervise constructions activities.
• Formulation of Method-Of-Statement, Risk Assessment and Safe Procedure
• Involvement in both internal and external WSH Activities.
• Maintain accurate and comprehensive project documentation, including daily report, inspection records and As-Built drawings.

Job Requirements:

• Minimum Higher NITEC/ Diploma in Engineering or related field.
• Proficient in MS Office applications
• Possess valid Singapore Class 3 driving License
• Good team player with ability to lead and multi task
• Good interpersonal skills and communication skills

Scope of Resposibilities

· Report directly to the Project Manager.

· To ensure high levels of client satisfaction.

· Present, Technical drawing and advise to current and potential clients

· Identify and resolve client concerns.

· Assist with the coordination of shipping schedules and delivery of products and services.

· Attend team & technical meetings

· Maintain accurate records of all activity reports.

· Work closely with the sales team to secure orders

· Adhere to all company policies, procedures and business ethics codes and ensures that they are communicated and implemented within the team.

· Assist sales to come out with design proposal during commercial phase

· Coordination with Client and vendor for project handing from start to end

· Commissioning on board vessel are require to attend

. Fresh Grad

Job Responsibilities

• Design, deploy, and maintain cloud-based infrastructure using AWS or Google

Cloud.

• Ensure compliance with asset management regulations in relevant countries.

• Monitor and optimize cloud resources for performance, cost, and security.

• Collaborate with cross-functional teams to develop and implement cloud

solutions.

• Troubleshoot and resolve cloud-related issues promptly.

• Develop and maintain documentation for cloud infrastructure and processes.

• Stay updated with the latest cloud technologies and best practices.

• Managing cloud environments in accordance with company policies and security

guidelines.

• Developing, deploying and debugging IaC code (Cloud formation and Terraform).

• Interacting with users, providing cloud support, and making recommendations

based on user needs.

• Employing exceptional problem-solving skills, with the ability to see and solve

issues before they snowball into problems.

• Educating teams on the implementation of new cloud technologies and initiatives.

• Regularly reviewing existing systems and making recommendations for

improvements.

Job Requirements

• Bachelor’s degree in Computer Science, Information Technology, or a related

field.

• 3-7 years of experience in cloud engineering, with a focus on AWS or Google

Cloud.

• Experience in the financial services industry.

• Strong understanding of cloud security, networking, and cost management.

• Knowledge of DevOps practices and tools.

• Familiarity with asset management regulations in countries where UOB Asset

Management operates.

• Experience with infrastructure as code (IaC) tools such as Terraform or

CloudFormation.

• Proficiency in scripting languages like Python, Bash, or PowerShell.

• Excellent problem-solving skills and attention to detail.

• Strong communication and collaboration skills.

Relevant cloud certifications (e.g., AWS Certified Solutions Architect, Google

Cloud Professional Cloud Architect)

- Prepare and submit technical documents, drawing and procedures to client.

- Involved with site inspection and commissioning at client premises (local or oversea shipyard).

- Manage,plan and monitor project schedule to meet contractual delivery. To ensure high levels of client satisfaction.

- Assist project manager to liaise with client and consultants on projects.

- Plan, coordinate and monitor orders and deliveries.

- Monitor in-house fabrication works to ensure compliance with approved drawing.

- Support sales team to prepare technical proposal.

- Attend technical meeting.

- Adhere to ISO Procedures and standards.

- Fire-fighting system integration experience is a plus.

- Diploma/ Degree in mechanical Engineering

- AutoCAD skills & basic computer skills (Microsoft Office - Word, Power point and Excel).

- Is a good team player and is analytical and a problem solver.

A Project Engineer, or Project Management Engineer, is in charge of planning and coordinating technical engineering initiatives to make sure they can complete a project within their budget and according to a schedule. Their duties include upholding project standards by researching compliance regulations, developing project implementation plans and adjusting specifications for elements of a project.

Project Engineer duties and responsibilities

Project Engineers manage the planning and processes of a project and delegate responsibilities to ensure the project is completed efficiently and successfully. Their day-to-day duties and responsibilities may vary depending on the type of industry, company or project they’re working on, but typically include the following:

• Conduct regular meetings with clients to ensure clarification and meet specific requirements in a timely manner.
• Delegate tasks to team members according to their individual skill sets, experience and abilities to ensure efficient completion of the project.
• Maintain budgets and make adjustments according to needs as they arise.
• Track performance and analyze the completion of key goals.
• Document and report project progress to collaborators and clients.

To manage and coordinate the production of quality shop drawings and BIM models in all projects assigned with minimal supervision. He/ She must be able to carry out HVAC/piping-related drawings.

• To produce 2D drawings from BIM models with accuracy ensuring drawings produced are according to the Project or the Client’s Drafting Standards and Procedures, and that the drawing submission schedule is achieved.
• Maintain proper records of all issued & received models/drawings, Clash Reports, RFIs, etc.
• BIM Register following the company’s ISO Standards and Procedures and ensuring all the drawings are completed on schedule or promptly.
• Perform regular drawing backups and housekeeping work in the directory
• The secondary role includes developing technical plans, sections, details, and 2D/3D schematic diagrams using AutoCAD and in-house software.
• Accountable for the fluent/organized presentation, content correctness/accuracy of shop drawings production in form, fit, and function through thorough coordinates with other trades and services in 2D/ 3D submission.
• Responsible for ensuring full compliance with the company’s Shop Drawings Standard Operation Procedure, including adherence to design provision/scope of work according to contractual obligations.
• Generate a clash report based on the Matrix provided
• Work under the supervision of the Project Manager and perform the work tasks assigned.

Experience / Skills

• Degree/ Diploma in Mechanical Engineering or other relevant disciplines.
• Preferably with a minimum of 2 years of working experience in space planning, and design coordination, preferably on different scales of projects within engineering design consulting business.
• Having good knowledge of software such as Revit, and AutoCAD.
• Knowledge in Isometric drawings, LOD 350, and Plant 3D will be added advantages
• Good planning skills in managing modeling and drafting work.
• Possess strong initiative, and ability to work independently and within a team environment when required.
• Good interpersonal, written and verbal communication skills.

We regret that only shortlisted candidates will be notified.

Perform servicing on electronics equipment and testing using Multimeter and other instruments

Provide troubleshooting, repair, maintenance on Printed Circuit Board ( PCB ) , power supply & electroincs equipment

Perform electronics & electrical functional testing

Figure out and replace electronics faulty components, using soldering iron, sucker with proper type of spare parts replacements

Install electronics part into specified locations using proper hand tools and specifications

Perform documentation for repair success rate and spare parts inventory

Job Requirement:

Minimum NTC-3 in Electronics /Electrical related field; prefer Electronics related will be added advantage

Minimum 2-3 years of Electronics/electrical repair and experience in good soldering skill , repair of power supply, PCB

Strong knowledge of electrical circuit theory and advance soldering skills

Great interpersonal and customer service skills

Good logical thinking and attention to details

Self-motivated and independent

Cloud Engineer

We are looking for a Cloud Engineer to help with the acceleration of cloud adoption. The

applicant will have a strong background in IT Infrastructure with a strong understanding

and at least 3 years’ experience with Public, Private and hybrid cloud.

Job Responsibilities

• Design, deploy, and maintain cloud-based infrastructure using AWS or Google

Cloud.

• Ensure compliance with asset management regulations in relevant countries.

• Monitor and optimize cloud resources for performance, cost, and security.

• Collaborate with cross-functional teams to develop and implement cloud

solutions.

• Troubleshoot and resolve cloud-related issues promptly.

• Develop and maintain documentation for cloud infrastructure and processes.

• Stay updated with the latest cloud technologies and best practices.

• Managing cloud environments in accordance with company policies and security

guidelines.

• Developing, deploying and debugging IaC code (Cloud formation and Terraform).

• Interacting with users, providing cloud support, and making recommendations

based on user needs.

• Employing exceptional problem-solving skills, with the ability to see and solve

issues before they snowball into problems.

• Educating teams on the implementation of new cloud technologies and initiatives.

• Regularly reviewing existing systems and making recommendations for

improvements.

Job Requirements

• Bachelor’s degree in Computer Science, Information Technology, or a related

field.

• 3-7 years of experience in cloud engineering, with a focus on AWS or Google

Cloud.

• Experience in the financial services industry.

• Strong understanding of cloud security, networking, and cost management.

• Knowledge of DevOps practices and tools.

• Familiarity with asset management regulations in countries where UOB Asset

Management operates.

• Experience with infrastructure as code (IaC) tools such as Terraform or

CloudFormation.

• Proficiency in scripting languages like Python, Bash, or PowerShell.

• Excellent problem-solving skills and attention to detail.

• Strong communication and collaboration skills.

Relevant cloud certifications (e.g., AWS Certified Solutions Architect, Google

Cloud Professional Cloud Architect)

Responsibilities

- Perform repair, troubleshooting and commissioning of Caterpillar engines/

machines / equipment.

- Coordinate and communicate with customer.

- Develop strategies to improve quality of technical support, and to improve service.

- Review set up for technical support with principals

Requirements

- Diploma in Marine / Mechanical Engineering / Mechatronics

- 2-3 years working experience in the construction/marine or mechanical handling

equipment industry or 5 years experience with Industrial Technician Certificate

- Ability to organise and lead with plenty of drive and initiative

- Shipyard working experience / sea going experience will be an advantage.