Responsibilities

• Daily Update of Project / Operation Progress to immediate superior.

• To have and maintain good daily attendance and punctuality.

• To update team member at least 2 working days in advance before going for leave , in order to minimize downtime.

• Ensure to know project scope of works and meet the client’s needs as per project standard and requirements.

• Supervise and oversee the sequential activities of Structural, Piping &

Mechanical Equipment (SMP) Installation such as Receiving, Locating in

the lay down, Preservation, Foundation and Structure, Receiving from

Main Contractor/Suppliers/Vendors, Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement, Touch up Painting and Hand Over.

• Must have working knowledge of all applicable piping and structure

standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.

• Managing project scope and change control with commercial or without commercial impact.

• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.

• To procure and requisition materials based on interpret construction and technical drawings.

• Communicate with Engineering/technical/quality requirement to team individuals.

• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance. Departments & Subcontractors and interfaces with other REL' s Business Units.

• Working closely with main contractor and client to ensure the project

meets the required needs.

• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.

• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritize from Pre-Fabrication required (e.g.

PTREI and Subcontractors).

• Preparation of method of statement, risk assessments for Piping,

Mechanical & Steel Structure Scopes.

• Monitoring and installation supervision with Subordinates to deliver the projects in Safety, Quality and Production manners.

• To liaise with clients representative on all project issues and

subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.

• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site.

• Communicating with Project Management Team / QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works.

• Assist with the management of internal and external third party interfaces.

• Monitoring and assist of site construction team for Installation, Testing and Pre-Commissioning works related to SMP Scopes.

• Liaise with respective functions or Bu's to prepare project planning,

contracts, procurement, progress reports and claims.

• Timely Setting out the target, plan and accurate achievement including manpower, materials and machineries as per scope and budget.

• To outsource the Shop-Prefab for Piping and Steel Structure Scope, Shop and Field Painting, Galvanising, Metal Roofing, Shop drawings (TEKLA),etc.

• Able to have understanding of systems and subsystems of the plant in order to expediously complete and handover to Client.

• To take note the Variation order (VO) and to take note of any Notice of Delay (NOD) during execution of the project.

• Nominating and training of supervisors, foremen, fitters, welders and

general workers to be capable of doing works well.

• To initiate and undertake action to prevent the occurrence of nonconformity.

• Promote best practice for Safety, Quality and Productivity.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to

eliminate and reduce HSE hazards, aspects and risks.

Requirements

• Preferably bachelor’s degree in engineering or relevant Pre-U/ A level/

College/ Diploma/ Advanced/ Higher/ Graduate Diploma/ Office Skill

Certificate or equivalent

• Preferably computer literate in MS Office Word, Excel and PowerPoint

• Preferably minimum 3 years’ experience of in oil and gas industry or related field

• Good oral and written communication skills in English

• Positive attitude with good interpersonal skills, excellent problem-solving skills backed by solid technical knowledge

• Ability to work in a dynamic and fast paced environment.

• Able to complete tasks with little or no supervision.

• Motivated Team player

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

1. Degree in Building/Construction Studies/Civil & Structural Engineering/Geological Science or equivalent

2. Ensure full adherence to company policies on-site, particularly health and safety standards

3. Able to manage and control workers and monitor their work closely

4. Attend project site meetings with the clients, consultants, sub-contractors, suppliers, authorities, etc. and to ensure the smooth progress of the project

5. Supervise the collection of soil and rock samples and instrument installation works

6. Prepare reports from fieldwork eg. Borelogs, installation records and daily journals

7. Co-ordinating with materials suppliers and managing the delivery, quality and installation of materials

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Responsibilities

· Analysing project specifications, developing work schedules, and delegating tasks to different teams.

· Ensuring that each project stays within the allocated budget and timeframe.

· Determines project specifications by studying product design, customer requirements, and performance standards.

· Determines project schedule by studying project plan and specifications, calculates time requirements, sequences project elements

· Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems

· Prepares project status reports by collecting, analysing, and summarizing information and trends and recommending actions

· Maintains a safe and clean working environment by enforcing procedures, rules, and regulations

· Preparing, scheduling, co-ordinating and monitoring the assigned engineering projects

· Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specification.

· Interact daily with the clients to interpret their needs and requirements and represent them in the field

· Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status

· Assign responsibilities and mentor project team

· Cooperate and communicate effectively with project manager and other project participants to aid and technical support

· Review engineering deliverables and initiate appropriate corrective actions.

Reuirements:

Maintains & assists PM with preparation of Weekly Project Update accurately and on time

Reviews project documents & creates RFIs in a timely manner

Maintains and updates RFI Log

Actively assists project superintendent with enforcement of site safety

Can identify quality issues in the field and communicate them accordingly

Assists in preparation and implementation of Project Execution Plan (PEP).

• Attends the Weekly Progress Meetings (Internal as well as with Client and consultant).

• Monitors work in progress and prepares weekly report of the status of each assignment.

• Ensuring all procedures and calculations are submitted to the client for review and approval.

• Coordinates materials and assists in the logistics, its shipment and receipt at construction site.

• Coordinates with all projects related personnel (onshore and offshore) on day-today progress of work activities, procurement and operations to ensure timely completion of the project.

• Provide full support as required by the Management and PMT for all projects.

skills

• Proven working experience as a M&E Engineer/Supervisor
• Excellent knowledge of design and visualisations software such as AutoCAD/BIM
• Advanced MS Office skills
• Familiarity with rules, regulations, best practices, and performance standards
• Ability to work with multiple discipline projects
• Decision making ability and leadership skills.

Position Summary

• To ensure legal compliance for all activities within assigned area of responsibility.
• To ensure a safe and healthy work environment within assigned area of responsibility.

Responsible for: (The main job activities)

• Ensure legal compliance for all activities within relevant regulatory framework and PaxOcean’s HSE Management System
• Support HSE Manager to implement and execute HSE Programs & Initiatives
• Plan, conduct and participate in audits to identify potential areas of improvement and best practices.
• Organise and conduct regular HSE site inspections with all relevant stakeholders and follow up on all identified non-conformances
• Function as a safety assessor as per relevant regulatory requirements
• Function as a Site Incident Controller (SIC) and lead the Company Emergency Response Team (CERT) during emergency situations
• To serve as secretary for the Vessel Safety Coordination Committee (VSCC) for all assigned projects
• Initiate and conduct investigation for the purpose of identifying root causes upon any occurrences
• Liaise with relevant authorities as point of contact representing PaxOcean
• Any other tasks or responsibilities as assigned by HSE Head

Job Requirements

• Diploma / Degree in any Engineering field or related discipline
• Hot work Assessor
• Confined Space Assessor
• Work at Height Assessor
• Relevant emergency response certifications will be an added advantage
• WSH Level C
• Candidates without prior experience are encouraged to apply.

Duties/Responsibilities

Drive Project Operations Dept.

1. Assists Project Manager to overseas the projects in charge

2. Ensure the project engineering issues are on schedule/within budget

3. Work closely with Engineering Service dept. to ensure accurate & updated construction drawing

4. Work with Supply Chain & Procurement on machinery and materials orders

5. Monitor all the material wastage

6. Deployment of resources (manpower, material, machineries) required to achieve project schedules

7. Ensure the sub-contractors to achieve project requirement & schedule

Prepare Risk Management Plan

1. Build contingencies in to the plan to provide a reserve in the schedule for unforeseen future problems

Administer Workplace Safety and health (WSH) and Environmental Management Systems (EMS)

1. Ensure workers/sub-contractor comply with the company safety regulation

Organise and Proper Handover the Completion Project

1. Ensure proper accurate handover of construction documents to the Clients

2. Ensure the Sub-contractor submit the proper handover documents to the company

3. Ensure the project deliver by us and sub-contractor to client(s) on schedule with "0" defect

Manage a Team with Good Technical Knowledge

1. Build and train a competent Supervisor, Leadmen and worker team

As work roles evolve over time, company may change your job scope, based on organizational needs and employee abilities, from time to time.

Backend Engineer

Salary: SGD 4,600 – SGD 6,200/month

Key Responsibilities:

• Develop and maintain robust backend systems to support our HR Tech platform.
• Collaborate closely with cross-functional teams to design and implement scalable solutions.
• Optimize system performance and ensure seamless integration with third-party services.

Requirements:

• Experience with backend development using modern frameworks.
• Proficiency in designing and managing APIs.
• Native-level English communication skills.
• No Japanese language proficiency required.
• Work remotely from anywhere under a labor visa in Japan. The company supports visa applications and registering your address in Japan.

Why Join Us?

• Global Expansion: Focused on Japan until 2025, with plans to enter the Indian market by 2026.
• Work Flexibility: Full remote and full-flex work style.
• Employee Engagement: Monthly team activities like pizza parties to foster strong connections.
• Relocation Support: One-way flight ticket provided upon joining and support with finding accommodations in Japan.
• Low Attrition Rate: Our employee-first approach ensures a supportive and engaging work environment.

Company Snapshot:

• Total Employees: 240 as of 2023.
• Management: Position reports to an American male leader residing in Japan (mid-30s to 40s).

Ready to embark on an innovative journey with us? Apply now to shape the future of HR Tech!

==Contact==

JUNYA OISHI:
Reg No. (MOM): R2094543

Fellows Creative Staff Singapore Pte. Ltd.
Registration No. (ACRA) : 201329050C
License No. (MOM) :　13C6828

Job Responsibilities

- Supervise Plumbing & Sanitary installation works.
- Discuss with Main Contractors, Sub-Contractors & Suppliers and Consultant if necessary.
- Documentation of method statement and work procedures.
- To develop, monitor, and review site construction activities to ensure work completion as scheduled.
- Manpower arrangement and supervise/manage site arrangement.

Working Day: 6 days per week

Job Requirements

Min 3 years experience in similar experience and managing a few sites.
Knowledge of Plumbing/Sanitary and Gas as an Advantage.

Astek has an opening of Quality Engineer role for our projects in Singapore.

Responsibilities:

• Develop and maintain automated test cases, test plans, and test frameworks, ensuring alignment with evolving requirements and policy changes.
• Build, enhance, and manage the automated test framework and test environments.
• Execute testing on new features and document any defects identified.
• Conduct a variety of tests, including manual, functional, performance, and exploratory, while also supporting User Acceptance Testing (UAT).
• Assist in troubleshooting and resolving production issues.

Requirements:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 3-5 years of professional software quality testing experience, with hands-on automation expertise.
• Strong knowledge of testing methodologies, risk analysis, and test-driven development.
• Proficiency in Java or Kotlin, with Spring Boot knowledge a plus.
• Experience with automated testing frameworks like Cucumber, TestNG, Playwright, and performance tools like JMeter or LoadRunner.
• Familiarity with penetration testing tools such as ZAP, Burp Suite, and CheckMarx.
• Proven ability to work in SCRUM teams with excellent communication and collaboration skills.

The Civil Engineer is responsible for supervising structural projects. They ensure each project is feasible by analyzing local and environmental impacts and making sure that they can be completed on time within the budget restrictions. Other duties and responsibilities may include:

• Considering budget, regulations and environmental hazards during risk-analysis stage
• Preparing material, equipment and labor cost estimates and confirming costs are within the budget
• Forecasting design and construction timeline
• Completing and submitting all permit applications to the appropriate agencies and ensuring projects are compliant throughout the design and construction stages
• Overseeing soil testing to establish soil strength and building feasibility

Geotechnical Engineer, for COWI in Singapore

Are you interested in joining one of the leading consulting companies, creating value for customers, people and societies world-wide? Are you a dedicated and proactive engineering and have experience in underground MRT stations and tunnels? If you can answer 'yes' to both questions, this could be the next step in your career.

JOIN OUR COWI INTERNATIONAL TEAM

With over 93 offices worldwide, COWI is a leading international consulting group providing clients with innovative and sustainable solutions to complex challenges within transportation, energy, environment, water, industry, buildings and planning. Together with our over 6,500 dedicated professionals, COWI pushes the boundaries of engineering design around the globe.

As a member of the SE Asia team, you will support local and international projects across the transportation and energy sectors, including railways, highways, metros, marine, wind, hydro, and more.

You will be joined by hundreds of skilled experts, collaborating over the entire lifecycle of a project – from idea, concept and design, to operation and maintenance within our portfolio of tunnels & underground structures, bridges, complex structures, ground engineering and reclamation projects.

DESIGN THE FUTURE WITH A GLOBAL TEAM OF EXPERTS

This is a superb opportunity for you to develop your career and work for one of the industry's foremost tunneling and civil engineering companies, based from our Singapore office.

As a Specialist, Geotechnical with a broad range of high-level technical experience, you will work closely with the structural team to design various structure especially underground MRT stations and tunnels.

On a day-to-day basis, you will be responsible for:

• Designing a variety geotechnical designs for ERSS, geotechnical and civil engineering projects, liaising with clients and other stakeholders.
• Detailed geotechnical design and analysis
• Ensuring that design, assessments and checking of designs are in accordance with the current Standards, Codes of Practice and Best Practice
• Review/checking/approval of designs, assessments and calculations in accordance with quality procedures
• Preparation of risk assessments and full compliance with DfS
• Coordination of work undertaken by external sub-contractors and design checkers and Client management

COWI is a leader within its field, because our employees are leaders within theirs. We invite you to learn from the best and expand your potential in an outstanding environment, where we collaborate on shaping tomorrow's societies. Alongside your manager, you outline the path for your development and build your expertise on a day-to-day basis, working on global and local assignments.

YOUR SKILLS. OUR TEAM. TOGETHER, WE DESIGN THE FUTURE

Your skills are the key to our success. Working across borders and disciplines, we share knowledge and build strong relationships with colleagues and customers. You contribute your expertise and get to learn from the best.

To succeed in this position, we believe that you should have excellent communication and rapport building skills.

Furthermore, you shall have:

• Sound understanding of DfS Regulations, specifically the designer's requirements and the risk assessment process
• Ability to manage own time
• Must have excellent communication skills, both verbally and in writing.
• Ideally, you will have experience in ERSS designing of underground MRT station
• Ability to manage small projects
• Ability to interface with other disciplines

DO YOU HAVE ANY QUESTIONS?

Please write to Ms Sani [email protected]

HOW TO APPLY

Click on the link below and tell us why you are the right person for this role. We look forward to receiving your application as soon as possible since the recruitment process is ongoing. The application deadline is stated at the top of the page.

EQUAL-OPPORTUNITY EMPLOYER

COWI provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, colour, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, COWI complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description :

• Perform environmental monitoring in various industries such as aerospace, pharmaceutical, chemical industry and etc
• Experience in Compressed Dry Air and Nitrogen Testing
• Day-to-day operations and activities such as noise, water & air sampling, monitoring, and report writing
• Coordination with customers and suppliers

Requirements :

• Degree in Chemical/ Environmental Engineering, Chemistry, or Science-related field
• Minimum 1 year of working experience
• Entry-level candidates are welcome to apply as on-the-job training will be provided
• Must possess Class 3 or equivalent driving license

Work location : 121 Genting Lane, ALS Building, Singapore 349572

Please apply with detailed resume stating current/last drawn and expected salary, and notice period.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

· Build data pipelines (ETL) to enable scalable processing of large volumes of data in AWS environment (Informatica, Pentaho)

· Organise, build and maintain data stores (e.g., RedShift, RDS) of structured and unstructured data (e.g., text, customer transactional data, work-flow/ticket/log data)

· Co-evaluate business needs and objectives

· Identify opportunities for data acquisition

· Conduct data analysis, working independently or with data analysts, and report on results

· Analyze and organize raw data

· Interpret trends and patterns

· Prepare data for prescriptive and predictive modeling

· Combine raw information from different sources

· Explore ways to enhance data quality and reliability

· Work with stakeholders to identify and solve business needs related to advanced data processing



Job Requirements

· Minimally a Degree in Computer Science, IT, or similar field

· At least 1 year experience working with SQL or as a data engineer or in a similar role.

· Proven work experience with ETL tool such as Pentaho Data Integration (KETTLE), Informatica.

· Excellent SQL knowledge and with proven experience with Data Analysis, Data Profiling and Data Processing.

· Good knowledge of working with databases such as Oracle, PostgreSQL, RedShift.

· Experience working with Tableau or similar BI tools.

· Technical expertise with data models, data mining, and segmentation techniques

· Ability to integrate data /data streams from different sources

· Great numerical and analytical skills

· Detail-oriented, with excellent organizational skills and experience

Interested candidate please click "APPLY" to begin your job search journey

We regret to inform that only shortlisted candidates will be notified.

EVO Outsourcing Solutions Pte. Ltd
• RCB No. 202233837K

Senior M&E Engineer

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm
Office at The Adelphi (City Hall)
Salary: $5000 to $6000

Job Requirements:

• At least 3 years relevant experience

Job Scope:

• Generate M&E co-ordination shop drawings.
• Evaluate and resolve M&E problems with consultants and sub-contractors.
• Attend principal meetings with client and consultants.
• Prepare M&E progress report or any other reports required by the client or consultants.
• Collect operational manuals from suppliers / sub-contractors on completion of project for submission.
• Check and ensure compliance with the requirements of ISO 9000, ISO 14001 and OHSAS 18001.
• Collaborate with site engineer to resolve problem and co-chair meeting monthly.
• Propose risk assessments based on tender drawings and documents.
• Develop VCED, including cost-effective solutions for M&E.
• Review M&E work schedules and lead times to create suitable project schedules using Microsoft Project (or equivalent) for tender projects.
• Assist in tendering work by proposing appropriate architectural and C&S solutions, including necessary plinths, access panels, structural openings, dog houses, make-good areas, and other related elements.
• Attend site surveys and ensure proper methods of statement and material shifting are in place.
• Review all VOs on-site and evaluate costs based on POs and tender clarifications.
• Collaborate with the Planning and QS Departments on related matters.
• Prepare Tender presentation slides and present M&E-related items to the client during interviews.
• Full M&E functions as designated and not limits to other general assigned duties.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Technical Sales Engineer/ Product Sales Engineer

Location: Bukit Batok

Working Days: 5 Days

Working hours : 9am - 6pm

Salary : SGD2,200 - $3,500 (not inclusive of transport allowance, bonus/commission)

Job Responsibilities:

• Develop a thorough understanding of our complete range of product
• Responsible for preparing quotations, proposal according to customers' requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.
• Industry: Electrical & Electronics

Requirement:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic
• Passion for automation, with creative and adaptive approaches

Skills

• PLC programmable logic controller programming, touch panel, Control And Automation

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

The Lead Software Engineer/Assistant Manager will be part of the IT Service Management team in SIA's Information Technology Division, focusing on enhancing IT operations efficiency and effectiveness. This role involves managing initiatives to improve service quality and operational resilience, including process improvements and implementing new tools and methodologies. The successful candidate will collaborate with stakeholders to ensure swift recovery from complex incidents, manage disaster recovery, and drive improvements in service availability and operational stability.

Key Responsibilities include:

• Improvement Initiatives: Identify areas for improvement within IT operations through data analysis, stakeholder feedback, and performance metrics. Lead improvement projects, aligning them with business goals and IT strategies. Apply process improvement methodologies like Lean, Six Sigma, or ITIL.
• Process Optimization: Analyse existing IT processes to identify inefficiencies and design streamlined processes to enhance response times, reduce costs, and improve service quality. Ensure effective adoption of new processes.
• Performance Metrics Review and Adoption: Develop and maintain metrics and KPIs to monitor IT operations and improvement initiatives. Provide regular reports to senior management, utilizing data-driven insights for decision-making.
• Stakeholder Engagement: Collaborate with IT leadership, service desk teams, and other stakeholders to address operational challenges. Facilitate workshops and meetings to gather input and drive consensus on improvement initiatives. Foster a culture of continuous improvement.
• Incident Management and Resiliency: Take ownership of critical incidents, ensuring swift resolution and conducting root cause analyses. Proactively prevent defects and eliminate inefficiencies to enhance system resilience.
• ITSM Leadership and Training: Provide ITSM knowledge training to all IT teams, including remote offshore resources. Mentor team members and align ITSM ITIL practices to ensure operational readiness.

Requirements:

• Degree in Information Technology or related fields, with ITIL/Service Integration and Management (SIAM) certification. Additional certifications in ITSM CAS, CAD, or CIS are a bonus. Knowledge and certification in Business Continuity Management (BCM) preferred but not mandatory.
• At least 5 years of relevant experience in IT Operations and IT Service Management, including process improvement. Proven proficiency in Agile methodologies for operations management.
• Hands-on experience with ServiceNow Platform or equivalent ITSM tool is mandatory. Familiarity with network and cloud technologies (e.g., Linux, Wintel, VMware, DevOps) preferred.
• Strong analytical skills, project management skills, and a proven track record of successful improvement initiatives in an IT environment. Proficiency in collaboration tools (e.g., Microsoft Teams, SharePoint, JIRA, Confluence) and monitoring/orchestration platforms (ScienceLogic, Splunk, APM).
• Excellent communication and interpersonal skills, with the ability to influence and engage stakeholders at all levels.
• Ability to work on strategic direction initiatives, balance multiple priorities in a fast-paced environment, and oversee operations, including Service Desk, IT Operations Command Centres, Major Incidents Handling, and Chairing Change Advisory Board reviewing teams' readiness for Major change.
• Adaptive, responsive, able to manage dynamic environments effectively, independent, self-motivated, result-driven, and willing to work beyond office hours.

Japanese MNC

Salary $2600-$3000

Location: Ubi

Industry: Electronic Component Manufacturer

Monday to Friday 8.30am to 5pm

Requirements

• Electro-mechanical engineering background preferred and the company will provide necessary training for the candidate to assume this position
• Ability to travel at short notice to S.E. Asia and other markets as required by the superior

Job Roles

Technical aspects

• To inspect, service and maintain our company’s crimping tools, machines and equipment to ensure they remain in tip top condition prior to shipping to our customers
• Provide on-site after-sale service such as repair, replace spare parts and provide technical education to the customers who may encounter technical issues when operating our crimping tools, machines and equipment
• Troubleshoot, analyse and recommend service or repair methodology on the crimping tools, machines and equipment to the customers whenever there is a technical breakdown affecting their production operation
• Overhaul and inspect conditions of crimping tools, machines and equipment returned by the customers
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Description:

• Manage projects and renovations for hospitals, medical centers, and related units.
• Track and support preventive maintenance, service contracts, and car park operations.
• Assist with assigned projects, ensuring they meet deadlines and budgets.
• Solve problems independently and work well with various departments.
• Oversee contractor and vendor schedules to minimize disruption.
• Coordinate with colleagues and contractors to maintain equipment and facilities.
• Perform other duties as assigned by supervisors.

Requirements:

• Degree in any of these field :
• Engineering (Mechanical, Electrical, or Civil)
• Facilities Management
• Project Management
• Construction Management
• or a related field
• No need experience , On Job Training Provided ( Pay Range : 3K - 3.4K* )

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

• Basic Salary UP$4200 + Transport Allowance

• Company located at Tuas

• 5 Days work week: Monday – Friday: 8am – 5pm

• Well Established Manufacturing Company

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Understand the full requirements of all manufacturing and improvement project.
• Familiar with various laser systems as well as advance welding / cladding technique.
• Experience in robot programming for welding / laser cladding.
• Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.
• Generate PCR and manufacturing process plan.
• Generate engineering drawings and perform drafting.
• Support Asst. Engineering Manager on the job costing.
• Continuously explore for new manufacturing method or new external providers to support the production.
• Work closely with the Production team to resolve any production issue.
• Support the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Requirement

• Diploma / Degree in Mechanical / Manufacturing Engineering or equivalent
• 1 - 3 years of relevant experience in metal machining or oil & gas industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety
• Perform electrical and Instrumentation troubleshooting
• Able to work and trouble shoot with AC low voltage single phase and 3 phase systems
• Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain
• Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose
• Experience in 3 phase generator control interfacing to grid power
• Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva)
• Understand and develop electrical panel schematics if needed
• Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting
• Update and control of Electrical specification, procedure and drawings
• Material Management including consumables, parts and spare units
• Responding to breakdowns, diagnosing faults, record and report
• Review and approve of service, repair and overhaul equipment, record and report
• Managing routine 5S at the maintenance workshop, store and work area at site
• Communicate with clients, consultants, project personnel and relevant authorities
• Other ad-hoc duties as assigned

Requirements:

• Degree in Electrical Engineering or Instrumentation / Maintenance Engineering
• At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

To manage and execute EMS/DMS SCADA projects and service contracts

Carry out routine and corrective maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements

Ensure smooth and proper execution of projects/contracts

Requirements:

Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognised Polytechnic/University

Preferably have some working experiences in executing /maintaining of SCADA and Substation Automation System.

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Transport Provided at Yishun, Woodlands, Jurong East and Boon Lay MRT
• WFH Working Arrangement

Key Responsibilities:

1. Dealer Development

• Support the reporting Manager to manage the dealer support and development activities such as plan & set up yearly development / enhancement program for specific dealers; plan & execute trainings on new products to dealers; prepare and review training materials; plan and organize regional trainings to dealer base on training needs.

2. Dealer Support

• Support the reporting Manager to manage and oversee the services.
• Collaborate with other teams such as Parts Sales & Machine Sale to provide technical support and conduct field visits for troubleshooting and resolve issues; gather feedback from both internal & external sources for product improvement.
• Manage Dealer portal to provide timely and accurate service information as Product Support Bulletin to share with dealers.

Requirements:

• Minimum Diploma Education Level
• No experience is required
• International Travel for business needs
• Good Communication and Interpersonal skills
• Cross cultural sensitivity
• Adaptability and Ability for fast learning
• International Travel

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

• Well Established Company
• Basic $5500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer
• To successfully completely New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ)
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes
• To update the status of on-going programs to the management
• To consistently pursue for new customers
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma / Degree in Mechanical Engineering/Precision Engineering or relevant qualification with minimum 2-3 years relevant working experience
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492