• Provide technical subject matter expertise to enhance the electrical reliability and ensuring all KPIs are met.

• Improve reliability of electrical equipment by implementing repair recommendations and conducting inspections based on engineering codes and standards.

• Provide troubleshooting services to resolve electrical issues impacting safety, quality and reliable plant operations.

• Offer technical reliability guidance to site maintenance team during unplanned electrical outages.

• Liaison with OEMs and vendors for reliability improvement works and raise PRs for spares and services.

• Develop and implement preventive maintenance programs, analyze reports and address recurring issues.

• Roll out reliability improvement programs for the site based on global directives.

• Identify, procure and manage the critical spares required for electrical maintenance.

• Lead reliability-related RCA/Failure Investigations and conduct FMEA.

• Review and grade the low level RCAs performed by technicians and suggest action plans.

• Lead the RCM and CERR programs for electrical discipline addressing critical issues and bad actors.

• Provide technical support for process safety studies like PHA related to electrical discipline.

• Execute Turnaround job scopes for electrical discipline and ensuring all the TA KPIs are met.

• Review standard maintenance procedures and risk assessments for electrical equipment.

• Support global and site audits related to electrical reliability and close assigned action items.

• Raise MOCs for new projects and non-RIK modifications related to reliability improvement.

• Provide cost-saving ideas and productivity projects to reduce maintenance and TA costs.

• Review and optimize the warehouse inventory stock for electrical discipline-related spares.

• Support procurement teams in the vendor selection and approval process.

• Coordinate with OEM, electrical vendors, service contractors to define scopes, schedules and progress updates.

• Prepare five-year capital plan for discipline-related projects and lead reliability improvement capital projects.

• Expertise in electrical system studies such as short-circuit calculations, load flow analysis, relay coordination, motor starting analysis, harmonics studies and arc flash analysis.

• Proficiency with electrical equipment such as MV/LV switchgear, induction motors, power and control cables, bus ducts, UPS systems, transformers, diesel generators, VFDs, and SS.

• Good understanding of single line diagrams, control schematics, interconnection diagrams and logic diagrams.

• Strong knowledge of Singapore’s earthing, lightning protection

requirements and hazardous area classification.

• Review vendor drawings and electrical design calculations for electrical equipment and perform FAT of electrical systems at

OEM/Vendor sites for electrical projects.

• Execute SAT, loop testing, interlock, function testing, assist in electrical pre-commissioning and commissioning activities for electrical projects.

• Prepare project close-out reports, hand over systems to operations and update technical documentation.

• Participate and support the safety, quality and reliability programs of the site.

• Collaborate with multidisciplinary teams to ensure performance

standards are met by implementing best practices and maintaining compliance with industry standards.

• Mentor electrical team members in areas of technical expertise and provide training to in-house electrical contractors and operations team on mandatory electrical trainings.

• Network with peers and industry experts to adopt best practices for technology improvement and reliability programs.

Role:

Senior Electrical Design and Commissioning Engineer (Marine Vessel Solution)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• S$ 4,000 - 6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Salary: up to $8000

Working Days & Hours: Mon-Fri Office Hours

Location: Tuas (Transport Pick Up: Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun)

Job Description:

• Design and implement Automation and/or Digital solutions to support and optimize Active Pharmaceutical Ingredient (API) manufacturing operations.
• Maintain and ensure optimum performance and availability of the Automation and Digital systems/applications such as PCS/CMS (Delta-V), Programmable Logic Controllers (PLC), AMPS, Catalyst (Product Life Cycle Management System), Infrastructure and Cybersecurity and other digital transformation applications / systems used for manufacturing (such as IIoT, Advance Process Control).
• Provide support to ensure successful product manufacturing and projects execution.
• Participate in Process Centric Teams (PCT) in supporting the development of production recipes and devising automation solutions that improve productivity, business operations and safety/quality standards.
• Troubleshoot automation related issues in manufacturing operations. Lead or participate in quality or safety investigations and implement any automation solutions resulting from these investigations
• Actively attain knowledge of process unit operations.
• Participate in periodic alarm review/analysis and derive with solutions to reduce alarms.
• On Call Support for Operation team which includes after office hours support on rotation basis.
• Participate as automation representative in capital projects involving facilities, utilities and equipment.
• Responsible to raise Automation-related change controls in QTS system.
• Responsible to raise Automation-related incidents, events and QARs, and/or support cross functions in the investigation.
• Author or update existing Automation SOPs and/or system design documentation as part of periodic review.
• Ensure seamless data flow through all interfaces and hierarchies of system connectivity, within control system, and between other systems.
• Provide support and be subject SME in Audit.
• Lead any FAT / SAT tests as required.
• Validate new PCS systems and changes to existing systems.
• Perform Preventive Maintenance of Automation systems as scheduled.
• Identify and address issues at recipe level as well as 3rd party interfaces with Automation systems.
• Actively contribute to the building and leveraging of knowledge base within the automation team.
• Team player with proven performance records, creative thinking abilities, and excellent communication skills.
• Co-ordinate and work with Global site Automation team members to investigate and troubleshoot critical issues
• Provide training related to Automation systems to relevant cross function departments!
• Customer-focused, positive attitude and a demonstrated passion for innovation and continuous improvement.
• Liaise with Vendors for troubleshooting of fundamental application software/architecture level issues
• Participate and actively support Digital for PGS initiatives involving system integrations, data connectivity, validation methods and value-based optimization of manufacturing via process control system

Job Requirements: Min Degree in Engineering or similar w min 4-7 years of experience in Process Automation, preferably in a batch manufacturing environment; Extensive knowledge and experience in process automation system, preferably in Emerson DeltaV

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

The Opportunity

• Our Client, US established MNC company
• DCS Engineer
• Monday to Friday: 7:45am - 4:45pm
• Location: Jurong Island, Singapore
• Basic Salary: $6500 - $10000 (Based on experience)
• Completion Bonus

The Talent

• Bachelor's Degree in Electrical, Electronics/Instrumentation and Control/Chemical
• At least 5 years related work experience in DCS in refinery, petrochemical or chemical industry
• Strong analytical/trouble-shooting skills
• Advance knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Excellent interpersonal and communication skills
• Good knowledge in SQL Programming/Power BI, Process Control Domain & Network administration
• Able to start in a short notice / immediately

The Job

• Provides engineering design, troubleshooting and maintenance of Distributed Control System
• Troubleshoots day-to-day process on process control applications, and controller tuning
• Assist Process Hazard Analysis and implements process
• Maintain documentation for DCS
• Conducts training programs for operators
• Lead and support development & execution of control system and greenfield projects

Next Step
Interested candidates can email to [email protected] with details below:

• Full Name
• Residential Area
• Work commit period
• Updated Resume

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities

• Develop, test, and maintain ETL processes using Informatica and Pentaho for data integration and transformation.
• Write and optimize Oracle PL/SQL queries for data extraction, manipulation, and reporting purposes.
• Implement and maintain UNIX shell scripting, Perl, and Awk scripts to automate data-related tasks.
• Support financial reporting using Hyperion and Oracle Report Writer.
• Manage job scheduling and batch processes using Tidal Enterprise Scheduler (TES).
• Collaborate with team members to implement Big Data solutions, including data processing and analytics on platforms like HDFS, Spark, Hive, and Scala.
• Conduct ETL processes and data handling on databases such as Oracle, Sybase, and SQL Server.
• Use HP Seaquest for data repository management and HP Quality Center (HPQC) for quality assurance of data pipelines.
• Leverage knowledge of BI tools (e.g., MS BI, Qlik, OBIEE) for reporting and data visualization.
• Contribute to the development of Python scripts to support Big Data ETL processes and workflows.

Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 8+ years of experience in ETL development, data warehousing, or a similar role.
• Proficiency in Informatica and Pentaho for ETL.
• Strong knowledge of Oracle PL/SQL, Oracle, Sybase, and SQL Server.
• Solid experience in UNIX shell scripting, Perl, and Awk.
• Familiarity with Hyperion and Oracle Report Writer.
• Hands-on experience with Tidal Enterprise Scheduler (TES) or similar job scheduling tools.
• Exposure to Big Data technologies such as HDFS (Hadoop), Spark, Hive, Scala, and Python.
• Knowledge of BI tools including MS BI, Qlik, and OBIEE.
• Strong analytical and problem-solving skills, with the ability to work independently and in a team.
• Familiarity with HP Seaquest and HPQC is a plus.

Savita Rai

EA REG NO: R1873418

EA License No:23C2060

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Our Client:

• Construction Industry [MNC]
• Havelock
• Mon – Fri, 8.30am – 5.15pm
• UP $3,500 Basic + VB + Mobile Allowance

Job Description:

• Assist the QS Manager in calculating quantities and costs for tender assignments, ensuring supplier proposals meet all requirements.
• Understand general contracts and various tender documents.
• Provide budget estimates as instructed.
• Liaise with suppliers for product and service presentations.
• Find solutions to technical issues during the tender process.
• Communicate with other departments regarding documents and issues.
• Coordinate with suppliers/contractors for follow-up on bills and quantities.
• Evaluate market rates for materials and labor monthly or quarterly.
• Hand over all tender documents and costing to the project team once awarded.
• Attend site visits for interested tenders.
• Respond to tender clarifications and prepare for interviews and presentations.

Requirements:

• Min. Diploma in Mechanical & Electrical Engineering or equivalent.
• Min. 1 year of mechanical engineering working experience as a Quantity Surveyor in Sub-Contractor environment.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Deidrie Chiam Rui-Xuan | EA Reg No: R23116361

RS Recruitment Agency LLP | EA Lic No: 17C8809

Job Responsibilities:

• Render all M&E Engineering support to the M&E Manager/Project Manager for the successful execution of the project.
• Liaise and coordinate with clients, consultants, consultant representative (RE/RTO), relevant authorities and sub-contractors on M&E issues and challenges.
• Coordinate with all M&E subcontractors, as well as project team structural and architectural colleagues to resolve all drawings, site discrepancy or technical issues.
• Attend all project meetings and progress meetings relating to meeting master program schedule.
• Ensure good M&E drawing management and the control of M&E documentation/filing on site.
• Ensure timely production and submission of M&E shop drawings, materials submission and method statements. All M&E shop drawings, materials and method statement are to be approved before use.
• Ensure all M&E site activities are well-planned, well-coordinated and on time.
• Oversee and guide all M&E staff/Supervisors/sub-contractors, ensuring work is carried out in accordance to the approved shop drawings, materials and method statements.
• Prepare accurate and comprehensive M&E progress report with photographs when required.
• Arrange for all M&E T&C works
• Work with Consultants to come out with proper site inspection schedule to be carried out by the relevant government authorities.
• Work closely with EHS Department to ensure strict compliance of safety regulations.

Requirements:

• Degree in Mechanical/Electrical Engineering or related disciplines
• Minimum 3 years’ experience for Main Contractor in project management and/ or site coordination works for building or civil projects
• Strong in communication skill and speak good English
• A team player

· Responsible in providing day-to-day engineering support to manufacturing operations to achieve key business objectives involving quality and productivity.

· Provide support for engineering conception phase all the way to implementation and operations support.

· Work closely with cross functional teams to provide innovative engineering solutions for continue process improvements.

· Active involvement in projects relating to design and implementation of manufacturing-related equipment, such as automated optical inspection units.

· Assist in developing, updating and revising manufacturing documentation in accordance with company policies, relevant standards, and regulations established by regulated agencies (e.g. ISO9001/14001/13485).

· Assist in initiating, evaluating and implementing engineering change order.

· Assist in anyalzing and determining conformance of materials and parts manufactured.

· Assist in monitoring and improving productivity metrics established as company’s goal.

· Participate in development and validation activities for R&D products.

Knowledge in Delta PLC programming and COBOT.

Job Description:

The Refrigeration Engineer/Technician will be responsible for the installation, maintenance, and repair of refrigeration systems used in the production and storage of ice, including ice machines, cold rooms, freezer trucks, and autopacking machines. This role involves troubleshooting, preventive maintenance, and ensuring all equipment operates efficiently and complies with safety standards. The technician will collaborate with the production team to minimize downtime and improve the overall efficiency of the facility.

Responsibilities:

1. Installation and Maintenance:Install and commission ice machines, cold rooms, freezer trucks, and autopacking machines.
   Perform routine preventive maintenance to ensure optimal functioning of refrigeration and packaging systems.
   Troubleshoot and repair breakdowns or malfunctions in refrigeration systems, including ice machines, compressors, condensers, evaporators, and automated packing equipment.
   
2. Refrigeration Systems Operation:Monitor the performance of ice-making and cold storage equipment.
   Adjust and calibrate refrigeration controls, such as thermostats and pressure gauges, to maintain optimal temperatures.
   Manage refrigerant levels, ensuring the proper handling and disposal of refrigerants as per environmental regulations.
   
3. Cold Room and Freezer Truck Management:Ensure cold rooms and freezer trucks maintain appropriate temperatures for ice storage and transportation.
   Conduct regular inspections of cold storage facilities and freezer trucks to identify potential issues.
   Manage the energy efficiency of refrigeration units, recommending upgrades or improvements when necessary.
   
4. Autopacking Machine Support:Maintain and repair autopacking machines, ensuring they operate smoothly and efficiently.
   Perform mechanical and electrical troubleshooting on packing machines and automate systems as needed.
   
5. Documentation and Reporting:Keep detailed maintenance logs and records of equipment performance.
   Report any major equipment failures or parts that need replacement to management.
   Assist in managing spare parts inventory for refrigeration and packing equipment.
   
6. Health & Safety Compliance:Ensure all work complies with safety standards, especially when working with refrigerants and electrical systems.
   Maintain a safe working environment, adhering to industry regulations for refrigerants and cold storage.
   

Requirements:

1. Technical Qualifications:Diploma or Degree in Refrigeration, HVAC (Heating, Ventilation, Air Conditioning), or a related engineering field.
   Certification in handling refrigerants (e.g., F-Gas certification or equivalent).
   Electrical and mechanical certifications are preferred.
   
2. Experience:Minimum of 3-5 years of experience working with commercial refrigeration systems, including ice machines, cold rooms, freezer trucks, and autopacking machines.
   Experience with ammonia-based refrigeration systems (if applicable) and other industrial-grade cooling systems is an advantage.
   Familiarity with automated packaging machines and production line equipment.
   
3. Technical Skills:Strong troubleshooting and diagnostic skills for both refrigeration and mechanical systems.
   Ability to read and interpret technical diagrams and manuals.
   Proficiency in using tools, meters, and other diagnostic equipment for refrigeration maintenance.
   
4. Communication and Teamwork:Good communication skills to coordinate with the production team, suppliers, and management.
   Ability to work independently and as part of a team.
   
5. Other Requirements:Willingness to work flexible hours, including on-call duties for emergency repairs.
   Valid driver’s license for maintenance work on freezer trucks.
   

• Receive Service Request / Incident through phone, email and Helpdesk Ticketing tool.
• Basic technical support at the End User Computing (EUC) and network level: PC, iPad, Laptop, WAN and LAN.
• User Account Management (Add, Delete and Change) and follow Change Management processes.
• Escalate to Level 2 engineer if the issue not resolved.
• Remotely assist users with support needs.
• Manage and monitor internal assets to ensure accurate inventory records.

Roles and Responsiblities

1. Site project management.

2. Overall project planning, scheduling, monitoring and updating to meet project completion targets.

3. Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

4. Work closely with sub-contractors on project progress and ensure timely work arrangements

5. Liaise with consultant and carry out site inspection.

6. Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

7. Preparation of structural analysis, loading calculation and drawings.

8. Establish good relationship with all relevant parties.

9. Ensure site safety & compliance to authorities’ requirements.

10. To take on PE Assignee supervision role.

Requirement

1. Degree in Civil Engineering or relevant Engineering

2. Min. 3 years’ experiences.

3. RE registration with IES

4. Experience in Infra-structure project more than 200million.

Other informaiton :

Work location at Bugis

To Apply

Please submit updated CV with below details.

• Current & Expected Salary

• List of Projects Handled

• Notice Period

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Job Scope:
As a member of customer support team, the Customer Support Engineer (CSE) will be responsible for technical support activities to customers and partners including on-site support and second line support as needed. He/she will act as the liaison between the field and customer support regional office in Hong Kong and being the technical representative to resolve customers and partners’ issues and escalations.

Responsibilities

• Provide remote support to customers to resolve technical problem
• On-site support to customers until problem solved
• Perform on-site installation and training to customers
• Handle and follow up escalated issues from customers until solution is provided. Communicate promptly escalations to the Regional Technical Specialist team in Hong Kong
• Provide application support to clients’ engineer or internal staffs
• Prepare timely report to customer support management
• Participate on special projects and company initiatives as needed.

Requirements

• Candidate must possess at least Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): Microsoft Office
• Preferably Junior Executive specialized in Engineering - Mechanical/Automotive or equivalent.
• Preferably with Class 3 License

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Job Scope:

• Install, maintain, and repair equipment and systems at customer sites
• Conduct regular inspections and preventive maintenance on equipment
• Troubleshoot and diagnose technical issues in the field
• Provide training and support to customers on equipment usage
• Prepare and maintain service reports and documentation
• Collaborate with internal teams to resolve customer issues
• Ensure compliance with safety and quality standards
• Manage inventory of spare parts and tools for on-site work
• Communicate effectively with clients to understand their needs and provide solutions

Requirements:

• Nitec/Higher Nitec in Mechatronics/Mechanical Engineering or Diploma in Mechanical/Electrical Engineering
• At least 2 years of hands-on experience in equipment servicing and repair
• More experienced candidates may qualify for higher positions
• Good command of written and spoken English
• Ability to write simple reports in English
• Responsible, hardworking, and able to work independently
• Positive work attitude and eagerness to learn new skills
• Capable of working under tight schedules
• Willingness to work after office hours as needed
• Availability for business trips on short notice

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Established in 2017, QCP is one of the first digital asset trading firms in Singapore, with a vision to partner the next generation of investors to unlock institutional opportunities in digital assets. 

QCP brings to clients deep expertise gained from thriving through multiple market cycles. A global market maker in digital asset derivatives with a vast network of liquidity providers and counterparties, we are shaping the future of digital asset markets through greater access and efficiency. 

We offer a range of tailored derivatives and spot trading as well as structured solutions to institutional, professional and accredited investors. We also provide 24/7 liquidity across various markets in partnership with various exchanges and platforms. 

QCP is headquartered in Singapore and is supported by a strong team of professionals in trading, business development, operations, risk and compliance teams.

Our in-house publications track the constantly evolving state of digital assets and markets, and can be accessed on our Telegram (t.me/QCPbroadcast), website (qcpgroup.com), Twitter (@qcpgroup) and LinkedIn.

Responsibilities

As an Entry-Level Cloud Engineer at QCP Capital, you will play a key role in supporting the design, implementation, and maintenance of our AWS infrastructure. You will be part of the Technology Operations team, reporting to the Head of Technology, and will work closely with cross-functional teams to ensure our cloud-based systems' availability, scalability, and security. This is a great opportunity for a recent graduate with a passion for cloud technologies to gain hands-on experience and grow their skills in a dynamic and fast-paced environment.

• AWS Infrastructure Management
• Assist in the design, deployment, and maintenance of scalable and highly available AWS infrastructure.
• Support the implementation and management of AWS services such as ECS, EC2, S3, RDS, Lambda, Networking, and others as needed.
• Monitor and optimize resource usage, performance, reliability, and costs.
• Monitor and improve AWS network performance.
• Security and Compliance
• Participate in regular security assessments and audits to ensure compliance with industry standards.
• Work closely with the security team to assist in responding to and remediating security incidents.
• Support efforts to enhance cloud infrastructure and data protection following Well Architected Framework principles.
• Automation
• Develop basic infrastructure as code (IaC) using tools such as Terraform, CloudFormation, or the Cloud Development Kit (CDK).
• Learn to implement automation scripts to streamline routine tasks and improve operational efficiency.
• Assist in setting up CI/CD pipelines.
• Monitoring and Alerting
• Help set up and configure monitoring and alerting systems to proactively identify and resolve issues.
• Collaborate with other teams to respond to and resolve incidents.
• Collaboration
• Work closely with development and production teams to ensure seamless integration of cloud services.
• Provide technical support and assistance to team members and stakeholders as needed.

• Bachelor's degree in Computer Science, Computer Engineering, or a related field.
• 0-2 years of experience in cloud engineering, software development or related fields.
• Experience with programming languages (e.g., Python, Bash) is mandatory.
• Experience with docker and containerization is a plus.
• Good understanding of Networking.
• Familiarity with infrastructure as code tools (Terraform, CloudFormation, CDK) is a plus.
• Knowledge of CI/CD pipelines, cloud architecture, security and DevOps practices is an advantage.
• Strong problem-solving skills, eagerness to learn, and excellent communication skills.
• Able to work independently.
• Interest in building a career as a Cloud Engineer with a focus on AWS.
• AWS certifications (e.g., AWS Certified Solutions Architect, AWS Certified Developer) are an added bonus, but not required.

The Environment We Offer

As a growing firm with a tightly-knit team, we respect and listen to all our employees. You will get the chance to make an impact by having your voice heard by everyone, including the management.

Our employees enjoy a high level of autonomy at work. We focus on substance, not form - as long as you can perform, you will be recognized and rewarded. We are also dedicated to supporting our staff and ensuring they develop holistically to maximize their potential in the long- term.

We also provide flexible working arrangement as required and a casual and fun environment to boot!

Project Overview

We are hiring research engineers interested in advancing the state of the art in data-efficient machine learning at SMART in the new program: Mens, Manus and Machina: How AI empowers people and the city in Singapore (M3S).

With the recent emergence of large language models (LLMs), the research engineers will assist in investigating how data-efficient and resource-efficient techniques, such as data attribution, data selection/reweighting, data valuation, data curation, Bayesian optimization, active learning, can be applied in the context of LLMs (as well as important issues involving AI privacy, model auditability and updatability).

Responsibilities

• Research on topics related to data-efficient machine learning, such as data attribution, data selection/reweighting, data valuation, data curation, Bayesian optimization, and active learning, in the context of LLMs.
• Investigate how these concepts as well as important issues involving AI privacy, model audibility, and updatability can be applied in the context of LLMs.
• Develop, implement, and evaluate experiments to characterise the feasibility and performance of the proposed research ideas.
• Collaborate with other PhD and undergraduate students to publish research results in top-tier conferences and journals, with focus on venues associated with the above-mentioned areas .

The research engineer will be jointly advised by Prof. Daniela Rus (MIT CSAIL), Prof. Alex 'Sandy' Pentland (MIT Media Lab), and Assoc. Prof. Bryan Low (NUS School of Computing), and based at SMART (Singapore-MIT Alliance for Research & Technology) in Singapore. The research engineer will have the opportunity to collaborate with PhD and undergraduate students, as well as Postdoctoral Fellows, within our research groups.

For more information on our research group and interests, visit

https://danielarus.csail.mit.edu/

https://www.media.mit.edu/people/sandy/overview/

https://www.comp.nus.edu.sg/~lowkh/research.html

Requirements

• Degree or Masters Degree in Computer Science, Machine Learning, Artificial Intelligence, or other related disciplines.
• Strong publication record at premier AI/ML venues such as ICML, ICLR, NeurIPS, CVPR, ACL, EMNLP or similar.
• Strong proficiency in programming.
• Strong proficiency in English and communication skills.
• Experience with machine learning and deep learning frameworks such as Pytorch, Tensorflow, among others.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified.

Job Description

• Collaborate with stakeholders (customers, partners, colleagues) on data-related technical issues and infrastructure needs.
• Work with data scientists to gather data requirements for modeling.
• Design, develop, document, manage, and maintain data models, ETL processes, data warehouses, data management, and pipeline solutions for large volumes of structured/unstructured data from various sources with different latencies (on-demand, batch, real-time, near-real-time).
• Define, monitor, and report SLAs for data pipelines and products.
• Ensure data security and governance standards are met.
• Execute data quality assurance practices.
• Support data management solutions pre-sales initiatives, proposal development, and provide post-sales support.

Technical Knowledge/Skills/Competencies

• Expertise in relational/non-relational/NoSQL databases and enterprise data warehouses/marts.
• Proficiency in big data technologies (e.g., Hadoop, Spark, Hive, HBase).
• Knowledge of data ingestion technologies (e.g., Flume, Kafka, NiFi).
• Experience in scripting, programming, and software development (e.g., Java, C/C++, Python, R, MATLAB, Scala, SQL) for Windows or Linux.
• Experience in master data management, data governance, and data lifecycle management.
• Skilled in designing, documenting, implementing, and supporting data management solutions.
• Familiarity with software engineering best practices (development, programming, testing, version control).
• Knowledge of data privacy and security assurance.
• Understanding of machine learning, computer vision, and large language models is a plus.

Soft Skills

• Excellent written and verbal communication skills.
• Highly organized, motivated, independent, and resourceful team player.
• Strong analytical thinking, interpersonal, and problem-solving skills.
• Ability to work productively in a matrix reporting and fast-paced environment.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

As a Facilities Mechanical Engineer, you will be leading engineering and maintenance works in the fields of Mechanical equipment and system on site, to achieve continual improvement to system robustness, reliability and efficiency with the necessary guidance and direction from Facilities organization, to achieve facilities department, site, facilities corporate and company goals.

Job Responsibilities

• Plan and implement preventive and corrective maintenance programs for Facilities mechanical systems including HVAC, exhaust systems, scrubbers, process cooling water, chillers, boilers, cooling towers, compressed air systems, Fire protection system and cleanroom air systems to ensure maximum equipment uptime and reliability.
• Plan, design and lead mechanical system expansion projects to facilitate tool utilities demand of future technology of manufacturing equipment.
• Plan, design and lead mechanical engineering projects includes new construction, system upgrading and quality improvement.
• Respond and problem solving of system issues and production interruptions to mechanical related systems.
• Perform capacity tracking and planning for mechanical systems.
• Enforce to company’s environmental safety health policy and procedure, standard operating procedure with risk assessment, good housekeeping standard and quality policy when performing work.
• Apply computer base software to document and analyses records of maintenance work order, equipment history and project tracking.
• Maintain maintenance record for system fault history traceability.
• Proficient in quality tool such as 8D & 5 WHY analysis for troubleshooting or incidents.
• Initiate and lead energy savings & sustainability projects.

Job Requirements

• Bachelor’s degree in Mechanical engineering.
• Design and Engineering background of mechanical system such as HVAC system and Exhaust system will be of good advantage.
• Ability to understand and use schematic, single-line drawing and related equipment and system documentation.
• Ability to work in a team environment with various professional level.
• Considerable knowledge and application of problem solving and data analysis methodology.
• Considerable knowledge of maintenance practices and procedure and installation work.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses. We will recommend that you watch this short video with input from our employees around the world.

Responsibilities:

• Understand the process and practices related to GNC support Templates and Standard Operating Procedures
• Ownership on critical incidents for customers to deliver resolution with in SLA.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up-to-date software.
• Troubleshoot production issues and network/security problems to fix any infra related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Performing RMA for hardware failures and replacement in production environment
• Perform health checks for the critical environments and ensure the systems running up to the standard and no potential failures.
• Setup staging and simulation for customer activities for critical jobs before actual tasks in production environment.
• Working in 24/7 operations centre and standby role for after office hours support on monthly rotational basis
• Able to follow and meet customer SLA for all the incidents and requests / responsible for the service delivery
• Undertake escalation for Enterprise Networking related matters from level 1 helpdesk engineers, perform level 1/2/3 on site troubleshooting and hardware field replacement works for customers.
• Responsible for updating technical documentations for configuration changes made via helpdesks and/or managed services customers.
• Responsible for opening and closing of support tickets when applicable and providing timely updates to helpdesk personnel and customer for support cases that has been allocated to you

The Individual and their Experience:

• Knowledge of ITIL principles, particularly Incident, Change, Problem and Service Management
• Minimum 2-3 years of relevant experiences in network operations including network, wireless, security technologies.
• Experienced on working with vendors and customer on outage situation and provide direction to juniors and customer on recovering services affectively.
• Hands on experience in operations and BAU for fixing user/infra issues in production environment is essential.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

• M&E Consultancy Services for Building and Industrial project
• $3,800 - $7,000 +Variable bonus
• Excellent career progression with equal opportunities
• Attractive employee welfare benefit
• Location: Hougang (Kovan)| Mon - Fri | 9am to 6pm

Responsibilities

• To design and engineering of Electrical system and ELV System (CCTV System, Access control System, Data and Telecom System, Fire alarm system, Emergency voice communication system).
• Prepare Concept design, detailed design, tender design and issue for construction.
• Liaise and coordinate with client, other consultants, contractors in development and implementation of the project until completion and advice on technical matters for Mechanical and Electrical related queries.
• Ensure cost control, maintain project timeline, manage manpower resources for the project.
• Prepare and vet drawings plan for submission to all Authorities.
• Liaise with appointed Mechanical and Electrical PE for all submission to authorities.
• Attend to site progress meeting and site technical issues.
• Attend and liaise with authorities for plan approval and site inspection.
• Conduct testing and commissioning of Mechanical and Electrical System
• Assist on the tender for all prospective projects.

Requirements:

• Has experience in Electrical system in Singapore Building Services Design.
• At least 1-2 years of related experience

KINDLY INCLUDE THE FOLLOWING IN YOUR RESUME:

1. Expected salary
2. Notice period
3. Past project details – what kind of construction/building, etc

We regret to inform that only shortlisted candidate will be contacted.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Job Scope:

• Designing electrical systems and circuits
• Analyzing the performance of electrical systems and identifying areas for improvement
• Testing electrical equipment to ensure safety and functionality
• Managing electrical engineering projects from initiation to completion
• Collaborating with other engineers on multi-disciplinary projects
• Creating detailed technical documentation, including schematics and user manuals
• Ensuring electrical systems comply with safety regulations and industry standards
• Providing technical support and troubleshooting assistance to teams and clients
• Improving system efficiency, reliability, and sustainability
• Overseeing the installation and commissioning of electrical systems
• Researching and integrating new technologies into existing electrical designs
• Conducting feasibility studies to assess the viability of system upgrades or new installations
• Preparing cost estimates for materials, labor, and installation
• Training and mentoring junior engineers and technicians
• Maintaining accurate project documentation and records

Requirements:

• Diploma/Degree in Electrical Engineering
• 2 to 3 years of relevant experience in automation machine design and development
• Proficient in writing PLC application programs (e.g., Omron, Allen Bradley, Siemens, Keyence, Beckhoff)
• Knowledge of PC-based programming (Visual Basic, C++) for machine control systems
• Hands-on experience with schematics and electrical layout design
• Ability to guide technicians on technical matters
• Occasional travel required

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Position Overview:

We are seeking a motivated and detail-oriented Semiconductor Engineer to join our Tool Installation team. This position is ideal for recent graduates with a strong foundation in semiconductor technology, electrical engineering, or mechanical engineering. You will be responsible for installing, maintaining, and troubleshooting semiconductor tools used in the production of advanced semiconductor devices.

Key Responsibilities:

• Tool Installation & Commissioning: Support the installation and setup of semiconductor manufacturing tools and equipment, ensuring they meet operational standards and specifications.
• Technical Support: Provide troubleshooting and technical support for tool-related issues, collaborating with cross-functional teams to resolve problems efficiently.
• Maintenance & Calibration: Assist in the regular maintenance and calibration of tools, ensuring they operate at optimal performance levels.
• Documentation: Maintain detailed records of installations, modifications, maintenance, and performance data for tools and equipment.

Required Qualifications:

• Education: Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Semiconductor Technology, or a related field.
• Certification: Must have an Engineer certification (e.g., EIT or equivalent).
• Technical Skills: Familiarity with semiconductor fabrication processes and tools is a plus. Strong knowledge of electrical circuits, mechanical systems, and troubleshooting techniques.
• Problem Solving: Ability to diagnose and resolve technical issues effectively and efficiently.
• Communication: Strong written and verbal communication skills. Ability to document work processes clearly and collaborate effectively with team members.
• Team Player: Ability to work in a team environment and follow detailed instructions while taking initiative when needed.
• Attention to Detail: A keen eye for detail, ensuring that installations and processes are carried out according to established protocols and safety guidelines.

Preferred Qualifications:

• Internship or project experience related to semiconductor tool installation or maintenance is a plus.
• Familiarity with cleanroom environments and semiconductor manufacturing equipment is desirable but not required.