Position Summary

Your main role will be to ensure that Lam Research comply with regulatory and safety requirements. You will be is responsible for administering and coordinating the organization’s Workplace Safety and Health Management Systems, processes and policies. This will include conducting safety inspections, closing audit findings, reviewing workplace risk assessment and coordinating safety training for all personnel.

Job Responsibilities:

• Enter, inspect and examine worksite for potential safety violations/hazards; (WSH Reg)
• Inspect and examine any machinery, equipment, plant, installation or article in the worksite for potential violations / hazards; (WHS Reg)
• Assess the level of noise, illumination, heat or harmful or hazardous substances in the worksite and the exposure levels of persons at work; (WSH Reg)
• Investigate any accident, dangerous occurrence or occupational disease that occurred within the worksite. Coordinate with management, customers and relevant authorities when an incident / accident occurred
• Employ risk mitigation strategies, and environmental and safety requirements for the business unit;
• Identify safety lapses and provide solutions to improve. Execute to aligned action plans to close the identified gaps;
• Conduct audits to ensure conformance to Lam’s and customers’ safety requirements, policies and procedures;
• Conduct safety briefings (as appropriate) including representing Lam Research at customer meetings on issues relating to EHS;
• Report/ assist in any accident / injury/ near misses’ investigations
• Establish mechanisms to implement and monitor compliance requirements such as advise and assist with job analysis, risk assessment, job instruction training, safe work procedures, method statement
• Establish tracking and ensure that all Lam personnel attend required training such as CSOC (Construction Safety Orientation Course) and other related EHS (Environmental, Health & Safety) training for employees, including new hires, contractors and loaners from other countries;
• Take appropriate action to halt any conditions that may result in imminent hazard to persons, property, or the environment;
• Perform the role of Safety Assessor for the inspection/ assessment of Permit-to-work system
• Notify the local EHS manager of any unresolved compliance issues and situations, and seek EHS guidance in implementing corrective actions as needed; facilitate and promote the exchange of information within the business unit and with EHS in the interest of collaborative problem solving and program improvement;
• Represent the business unit on EHS committees (Customer meetings) and provide regular briefings to business unit management and the local EHS manager on the unit’s environmental and safety program status, trends and risks.
• Identify PPE (Personal Protective Equipment) requirements and sourcing of approved supplier for procurement
• Assist in applying special permits if certain work is required (e.g. hot work, working at tall heights etc), including facilitating the application / renewal of licenses and liaise with relevant authorities/bodies for license / permit issue
• Maintenance of worksite safety records, certificates, notices and documents (WSH Reg)
• Manages internal WSH systems, coordinates government agency or customers visits, inspections and compliance audit at the workplace and submit audit reports to relevant stakeholder for review (Customs, Foreign Trade, Biz Safe, MOM)
• Point of contact for physical security in Singapore Office
• A key member of the SEA BCP (Business Continuity Plan) team, responsible to ensure that the business continuity plan is up to date and support the coordination of annual BCP tabletop exercise.
• Lead a team of contract EHS officer / coordinator, ensuring that adequate resources are deployed to support different customers sites.
• Any other Safety, Health and Environmental related duties as assigned by the Immediate Supervisor

Job Requirements:

• Bachelor’s degree or equivalent
• Processes relevant qualification recognized ty the Ministry of Manpower
• Must be a registered Workplace Safety and Health (WSH) Officer with the Ministry of Manpower
• At least 10 years’ experience handling a WHS in a manufacturing site, preferably in the electronic or semiconductor industry
• Possesses strong inter-personal and communications skills, both in written and spoken English
• Comfortable to interact with people of diverse backgrounds
• Is meticulous and maintains detailed and accurate records
• Possesses good analytical and problem solving skills

Project/Site Engineer is responsible for planning and coordinating technical engineering initiatives to make sure they can complete a project within their budget and according to a schedule, also to uphold project standards by researching compliance regulations, developing project implementation plans and adjusting specifications for elements of a project.

1. Examine project specifications, technical clarifications, and construction drawings.
2. Execute scheduling of construction activities, requisition of materials, cost management, project oversight, and documentation to guarantee adherence to regulatory standards.
3. Collaborate with Structural, Architectural, and M&E personnel to address related challenges and concerns.
4. Ensure the timely and efficient advancement of construction activities.
5. Undertake QA/QC responsibilities in the designated area and ensure compliance with safety regulations on-site.
6. Compile various reports, including progress reports and project handover documentation.
7. Perform any additional tasks as assigned.

Education Qualifications & Other Requirements:

• 2 Years relevant working experiene.
• Diploma or equivalent.

To design, test, and implement control functions, developing unit tests and automated tests, analyze test data for ways to improve existing controls and design, lead and execute complex software projects, communicate with internal and external customers for requirements and roadmaps.

Requirements:

• Bachelor's degree in technical discipline
• At least 5 years of engineering experience in developing software solutions in semiconductor equipment industry preferred
• C/C++, JavaScript/C# programming and Linux experience
• Experience in PLC programming and automation

Interested candidates, please forward your updated resume to [email protected]

Zenith Infotech (S), a Tech Recruitment firm with 28 years of presence in Singapore, is looking out for Data Platform Engineer to be supporting our client's project.

Canddiate whom are open for 12 months contract to start with, are most welcome to apply here or email to [email protected]

Job Scope :

• Perform operation, installation, and monitoring of big data platforms
• Ensure the reliability and normal operation of multiple core systems for big data and online computing, resolving issues within the agreed SLA
• Evaluate infrastructure requirements for deployments and upgrade activities
• Develop and maintain technical documentations related to design, configuration, troubleshooting, backup, DR, etc
• Ensures deployment and operations of the data platform comply with prevailing security, regulations and audit requirements
• Provide recommendations on data governance practices and in-depth optimizations best practices

Requirements:
• Solid computer software basic knowledge; understand Linux operating system, storage, network IO and other related principles
• Familiar with one or more programming languages, such as Python/Go/Java/Shell/Ansible
• Experience with Cloudera, Informatica, or Denodo and its runtime components would be highly advantageous
• Relevant computing/distributed/big data system experience (Hadoop/HDFS /Kubernetes/Docker/OpenStack/Hadoop/Spark/Flink,etc.) would be advantageous
• Good data structure and system design skills highly preferred
• Good knowledge of information security highly preferred

Job Description:

• Control and manage resources including labour and machinery on site.
• Conduct regular inspections and assess the work performance done by subcontractors.
• Monitor and manage work progress of subcontractors.
• Manage and resolve technical issues.
• Assist in planning and sequencing of the construction operations according to the Project Quality Plan.
• Attend meeting with consultant.

Job Requirements:

• Recognized Degree in Civil Engineering.
• HDB experience preferred.
• Min 5 years of relevant working experience.
• Good computer literacy.
• Self-motivated and able to work independently.

Job scopes

• Perform operation, installation, and monitoring of big data platforms
• Ensure the reliability and normal operation of multiple core systems for big data and online computing, resolving issues within the agreed SLA
• Evaluate infrastructure requirements for deployments and upgrade activities
• Develop and maintain technical documentations related to design, configuration, troubleshooting, backup etc
• Ensures deployment and operations of the data platform comply with prevailing security, regulations and audit requirements
• Provide recommendations on data governance practices and in-depth optimizations best practices

Job requirements

• Bachelor’s degree in computer science or any equivalent
• With 3+ years’ experience in Data Engineering, DevOps and system engineers in Unix
• Solid computer software basic knowledge; understand Linux operating system, storage, network IO and other related principles
• Familiar with one or more programming tech skills, such as Python/Go/Java/Shell/Ansible
• Experience with Cloudera, Informatica, or Denodo and its runtime components
• Relevant computing/distributed/big data system experience (Hadoop/HDFS /Kubernetes/Docker/OpenStack/Hadoop/Spark/Flink,etc.)
• Good data structure and system design skills
• Good knowledge of information security

Thank you for your interest!

We respect your privacy and all communication will be treated with confidentiality. If you wish to know more about this position or explore other roles, please prepare your updated profile and get in touch with our consultant at [email protected]

Cristina Malabuyoc Malijan EA License No. 02C3423 Personnel Registration No. R1111547

Please note that your response to this advertisement and communications with us pursuant to this advertisement will constitute informed consent to the collection, use and/or disclosure of personal data by ManpowerGroup Singapore for the purpose of carrying out its business, in compliance with the relevant provisions of the Personal Data Protection Act 2012. To learn more about ManpowerGroup's Global Privacy Policy, please visit https://www.manpower.com.sg/privacy-policy

Roles and Responsibilities

• Develop and establish quality assurance deliverables and testing framework, including estimate testing scope and time needed based on user requirements, create and maintain test specifications in accordance with changing requirements, throughout development;

• Create and maintain automated test framework using tools such as Cucumber/Selenium to support continuous development and testing, including prepare test environment, create and maintain functional testing scripts in accordance with changing requirements;

• Conduct manual functional / exploratory testing to compliment automated testing, including browser testing and system integration tests with other modules;

• Conduct impact analysis of defect fixes discovered during manual or automated tests

• Validate stories using acceptance criteria, raising defects as needed and work with development team to improve the expected behaviours and test cases;

• Conduct performance and load tests if needed, validate the output and expected outcomes and feedback on improvement required;

• Conduct application performance and security testing if needed, to ensure we have a robust and secured system in place;

• Work with Business Analyst on UAT data preparation and support;

• Work collaboratively with the rest of the technical and business team, including understanding the business/user requirements to facilitate testing, participate in desk-checks to do early validation and verify completeness of story, as well as participate in showcases to demonstrate tested stories;

• Conduct system integration tests with external parties when necessary, validate the output and expected outcome e.g. data to and from external parties’ systems and feedback on improvement requirement;

• Work with DevOps team to establish process for deployment and maintaining CI/CD pipeline

Knowledge and Skills

• Tertiary education in relevant fields is preferred

• Experience in programming in Java / Python / NodeJs is preferred

• Hands-on experience with software testing including automated functional testing tools such as Cucumber, Selenium, Maven, Capybara is preferred.

• Experience doing automation testing in Agile development process will be an added advantage

• Have SQL scripting skills

• Hands-on experience in one or more of the followings is preferred:

o Application exploratory testing and regression test automation

o Application performance testing

o Application security testing

• Have relevant knowledge of software QA methodologies, tools, and processes

• Hands-on experience with performance testing tools such as JMeter, Gatling will be an added advantage

• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage.

• Strong analytical and problem-solving skills

• Good presentation and listening skills

• Good writing skills

• Good communication and interpersonal skills

• Team player

• Meticulous attention to details

• Able to multi-task, take initiative and work independently with multiple stakeholders

Technical Lead (Cloud L2) Role and Responsibilities,

• Overall responsible for managing AWS cloud (70%) and On-perm (30%) infrastructure to ensure high availability and performance.
• Overall responsible for supervising, directing, and coordinating all work related to cloud operations and project.
• Be a Single Point of Contact for client on Operation matters.
• Participate in the regular meeting with customer to update operation status.
• Provide technical guidance and support to team members and client IT teams as needed.
• Monitoring for security threats and responding to security incidents.
• Monitoring cloud and on-perm resource availability, performance, and troubleshooting of issues when required.
• Monitor and troubleshoot issues that impact cloud/on-perm services, including cloud-native network services and cloud-native security services.
• Work closely with cloud engineers, system engineers, database engineers and client IT staff to monitor and troubleshoot systems.
• Automating operation tasks to improve productivity through using tools and scripts to automate repetitive tasks.
• Collaborate with developers and other teams to maintain the cloud services that meet client operation requirements.
• Perform provisioning and configuring of cloud and on-perm resources such as creating and managing virtual machines, storage, and networking resources.
• Deploy, manage, and monitor middleware and applications deployment: This includes deploying of OS patches, applications deployment, and their updates to the cloud.
• Continuous monitoring and performance of resource scaling when demanded.
• Deploy automation to monitoring and scaling cloud resources.
• Securing the cloud environment through adherence to security policies and procedures.
• Perform troubleshooting and resolving cloud and on-perm issues.
• Supporting cloud users. This includes providing support to users of the cloud environment and applications.

Required Skills for OS, Backup and Applications

• Windows Servers 2019
• RedHat Linux 8/9
• Active Directory, LDAP, OWFT
• IIS, SLIF, CrushFTP

Required skill for On-perm,

• VMWare, ESXi, vCenter
• Veritas Netbackup

To Apply:
Please send your latest CV in word file to [email protected]
Kindly indicate your availability, current and expected remuneration package.
We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)
Registered EA Personnel (Reg. No.:R1551322)

Objectives of the position:

This role involves Customer Quality Support for our company’s product distribution, addressing customer feedback and product quality requirements/issues. The person in this position will be responsible for handling customer feedback or requirements, such as complaints, test data, and other technical information as requested. This includes necessary communication with all stakeholders (Customer, Supplier, Customer Service, Production Planning, Supplier Management, Logistics).

Knowledge in cable testing or Electrical & Electronic (E&E) product testing, along with an understanding of technical specifications, will be required to comprehend customer complaints (both technical and logistical) and provide appropriate advice for resolution.

Key Responsibilities:

1. Manage Customer Complaint Processes:

• Acknowledge the complaint

• Update the complaint in SAP & Customer complaint log

• Track the complaint & Close the complaint once actions are completed

• Summarize complaints for monthly reporting (LOS & Q-reporting)

• Properly handle customers’ needs by providing accurate and timely information on inquiries related to cable standards, test reports, and complaint handling

2. Track Supplier Quality:

• Conduct incoming inspections when required or prompted by customer complaints

• Update results in the SAP system and release inspected lots according to the defined usage decision

• Generate Supplier Corrective Action Requests (CAR) and track corrective actions by liaising with the supplier

3. Compliance with Standards:

• Familiarize with and comply with international cable testing standards and procedures

• Contribute to achieving company and department KPIs through due diligence, duty of care, and personal accountability for quality assurance in all tasks

4. Liaise with Stakeholders:

• Effectively close customer complaints by liaising with relevant stakeholders

5. Maintain Records:

• Maintain records in SAP and other relevant records

6. Operate Laboratory Test Equipment:

• Operate laboratory test equipment when required for the validation of complaints

7. Assist with Customer Technical Enquiries:

• Assist with product test reports, RoHS, REACH, and CE inquiries

8. General Assistance:

• Assist in other day-to-day activities related to the QA department as assigned by your superior

Skills & Qualification:

• Min. Diploma in Engineering (Electronics / Electrical) or equivalent

• Min. 1 year of experience in electrical / electronic product testing and qualification

• Knowledge in ISO 9001: 2015 QMS standard will be added advantage

• To be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

• Prior experience in SAP system is required for this role.

• Knowledge of cable product testing is an added advantage

• Good customer handling skills and able to communicate to all levels in the organization

• Proficient in Microsoft Words, Excel & Power point

• Addresses present issues immediately and independently

• Possess self-confident and willing to share opinions and expertise in discussions

• Anticipate potential problems and takes action to avoid crisis

• Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am to 5.30pm

Job Description

• Desired Candidate Profile Technology Engineering Expertise
• 5 years of experience in implementing data solutions using GCPSQL programming
• Proficient in dealing data access layer RDBMS NOSQL
• Experience in implementing and deploying Big data applications with AWSGCP Big Data Services
• Must have excellent SQL skills
• Experience with different development methodologies RUP Scrum XP Soft skills Able to deal with diverse set of stakeholders
• Proficient in articulation communication and presentation
• High integrity
• Problem solving skills learning attitude
• Team player Key Responsibilities
• Implement data solutions using AWSGCP and need to be familiar in programming with Java
• Ensure clarity on NFR and implement these requirements
• Work with Client Technical Manager by understanding customer’s landscape

EA Number: 11C4879

Key Responsibilities

• Undertake projects related to IT infrastructure (physical and virtual servers, storage, network, on-premises, and cloud), i.e., systems provisioning, installations, configurations, as well as monitoring and maintenance.
• Plan, gather requirements, design, implement, test, troubleshoot systems as per system requirements for new or existing systems.
• Provide technical support and advice to users on systems-related issues or queries.
• Perform systems administration/maintenance and work toward continuous optimization of systems performance.
• Standby with on-call availability with varied shifts, including nights, weekends, and holidays during critical cutovers; provide L2 support onwards.
• Improve governance (policies, standards, guidelines) for successful delivery outcomes, e.g., industry compliances, delivery frameworks/playbooks, post-mortem reviews, documentation.
• Work closely with all technical groups to onboard technical knowledge of solution offerings, inclusive of vendors and partners as needed.
  

Qualifications/Experience/Knowledge

• Diploma/Degree or other equivalent qualifications.
• At least 5 years of experience in:Practical experience working on OpenShift or Ansible on customer projects.
• Proven ability to design, implement, and support infrastructure projects:Technical knowledge of on-premises (data centres, virtualization, security) and cloud ecosystems, especially RedHat OpenShift and Ansible across technologies.
• Technical knowledge of the infrastructure stack, i.e., x86, Unix, storage, networks, security, servers.
• Experience handling IBM, Dell, and HP servers.
• Solid understanding of IT lifecycle management.
• Knowledge of ITSM, including ,Incident Management, Problem Management, Change Management, Asset Management and Patch Management.
• Strong problem-solving skills with the ability to prioritize and manage multiple tasks.
• Strong interpersonal and stakeholder management skills with the ability to coordinate between technical and business teams.
• Ability to interact effectively with various levels of internal and external stakeholders in both written and verbal forms.
• Demonstrated project management experience, handling multiple projects simultaneously.
• Ability to efficiently understand client organizations and their business models to tailor relevant processes to privacy requirements.
• Added Advantages
• ITIL Certification.
• CKA Certification.
• RHCE Certification.
  

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $10,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

We are looking for a QA Engineer proficient in Manual Testing.

• Gain exposure to the FinTech/ Online Gaming Industry.
• Salary package up to $4,200 + AWS + VB (~2 months).
• Dynamic working environment.

Responsibilities

• Review requirements, specifications and technical design documents to provide timely and meaningful feedback.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Perform thorough regression testing when bugs are resolved.
• Stay up-to-date with new testing tools and test strategies.
• Coordinate with development team/project management team for smooth SIT/UAT.

Requirements

• Tertiary education in Computer Science or related field.
• Min 2 years of working experience in Software Testing (Web Application/Mobile Application).
• Strong knowledge of software quality assurance methodologies, tools and processes.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50777 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Job Descriptions & Requirements

Job Descriptions:

To work with customer to identify and verify the scope of work

To work with customer or customer’s site project manager to develop project schedule

To work with project installation team to develop project installation schedule

To plan weekly work schedule with scheduler for the installation team

To work with project installation team to complete the weekly project monitoring report

To ensure timely progressive monthly project billing

To ensure that work site safety regulations are being enforced

To provide and monitor scope of work on project variation work for salesperson

Ability to work under pressure and resolve problem independently

Job Requirements:

Candidate must possess at least Professional Certificate/Nitec, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical/Electronic), Engineering (Mechanical), Computer Science/Information Technology or equivalent.

At least 2 Year(s) of working experience in the related field is required for this position.

Preferably Junior Executive specialized in Engineering - Electronics/Communication or equivale

Job Description

• Scope of Work: NPI (New Product Introduction) and mass production, for assigned product (module, sub-assembly, instrument level) for LCMS.
• Product Quality, Yield, and Cycle Time: Lead cross functional team to drive continuous product and quality performance improvement i.e. factory yield, DEFOA, warranty/Annual Failure Rate and production efficiency (yield and cycle time).
• Product Development: Collaborate with R&D in product development and validation, and provide engineering support. Works with R&D to design, develop and release new tools or process technologies and is a resource for risk assessments and design for manufacturability. Influencing the design of the product and/or process to ensure manufacturability leveraging global supply chain, enabling prototyping and run manufacturing and realiability test, scale-up, and manage prototype transition into production. Develop manufacturing and test for new product i.e. responsible for the development of product manufacturing process, assembly fixture/tooling and test system. Design test procedures to optimize test time and troubleshooting. Actively participate design reviews and provide input on electronic circuit designs and obsolescence re-design. Define manufacturing process and test and product test plans. Support and implement the transition of products and manufacturing processes from prototype to full production, and through the entire product life cycle.
• Product Sustenance: Performs a variety of engineering duties to support manufacturing operations. Provide technical support to day-to-day product issues and all product/manufacturing process related issues, which include customer quality issues, production line troubleshooting, product/part/process change validation, etc. Maintain & improve product quality. Redesign products/processes to meet cost objectives, obsolescence, and customer requirements. May be assigned as the technical leader to assist operating manager or as project lead for value engineering or CPE (current product engineering) projects, product/process improvement, product/process transfer, equipment and test enhancement, New Product Introduction.
• Process Improvement/Digitalization and Compliance, Lean Manufacturing: Ensure compliance to engineering change order (ECO) procedures and work instructions. Collaborate with R&D to transition design prototypes into cost-efficient, manufacturable (DFx) high-volume products. Implementing Lean Manufacturing principles within manufacturing. Design jig/fixtures for new product, to ensure product manufacturability. Utilizes digital solutions to optimize and maintain state of the art manufacturing processes.
• Supply Chain related: Collaborate with procurement and material engineering in the specification, sourcing and qualification of materials used in the design and production of Agilent products to meet quality, cost and manufacturability goals.
• Other tasks and responsibilities assigned by manager in support of business needs.

Qualifications

• Education: Bachelor's or Master's Degree or University Degree or equivalent in the field of Electrical & Electronic Engineering. Candidates with Mechanical, Mechatronic Engineering, Physics or Computer Science qualifications with strong product engineering experience are also encouraged to apply.
• Certifications: Relevant certifications can enhance your qualifications. Examples include ASQ, QC/QA, EMC, and EMI.
• Knowledge in 6Sigma / Engineering Statistics (PFMEA, SPC, DOE, Process Capability), Value Stream Mapping, Qualification of equipment and Process Validation would be added advantages.
• Skills: Knowledge of probability and statistics, board-level product qualification procedures, manufacturing processes, and familiarity with tools like Microsoft Office and pythons. Knowledge in designing test fixture and tools is added advantage.
• Experience: At least 5+ years relevant experience, especially in manufacturing environment of Mass spectrometry. Vacuum system, electronics and test is desirable. Process characterization and validation using tools such as Cp/Cpk, and Design of Experiments techniques have added advantage. Product test methodology, test software and tester development are advantageous.
• Passionate, innovative, systematic problem-solving and leading on continuous improvement. Self-starter and proven track record of results in setting, implementing complex engineering projects and achieving the goals and demonstrated levels of creativity.
• Must possess strong engineering and analytical skills. Ability to multitask, prioritize and work independently.
• Strong team player with good interpersonal skill and excellent collaboration, oral and written communication skills.

Job responsibilities:

• Report to, and provide support to the Lead/ Senior Instrumentation Engineer on assigned projects and report to the Head - Instrumentation Engineering at the basis level.
• Be familiar with and implement Company work processes, procedures and quality policy as appropriate on assigned areas of projects.
• Be aware of Company contractual requirements and Scope Boundaries
• Responsible for work assigned by the Lead / Senior Engineers through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements relevant to his/ her assigned scope of work. Specific duties could include:
• Prepare requisitions, specifications and datasheets as assigned.
• Evaluate vendor offers and prepare Technical Bid Evaluation Report for assigned packages.
• Populate Instrument database such as SPI/Aveva Instrumentation.
• Prepare and Issue documents such as Instrument Index, Hazardous Are registers etc
• Provide inputs to designers to develop design/drafting deliverables such as cable block diagrams, wiring diagrams, Layouts and review these deliverables
• Assist in preparation of control system deliverables such as I/O lists, Control narratives, Cause and Effect Matrix etc.
• Review and provide technical inputs on Instrumentation Engineering related technical matters to interfacing disciplines
• Review and provide technical inputs to equipment/ package related technical matters
• Be responsible for and manage the Instrumentation Engineering technical interfaces with equipment and package suppliers, in coordination with the Lead/ Senior Instrumentation Engineer, for assigned areas to ensure that the equipment and packages comply with the technical requirements & specifications of and to monitor the compliance to Client’s Basis of Design, Standards & Project Specifications.
• Continuously seek to improve discipline working methods, tools and procedures and contribute actively to “Discipline Development” and “Experience Transfer”.

Work experience requirements:

• Minimum of 3 years of work experience in instrumentation engineering activities such as preparation of data sheets, specifications, Technical Bid Evaluation reports etc in a reputed engineering consultancy.
• Applicants with less than 5 years of relevant Instrumentation Engineering experience may be considered for junior positions.

Qualifications:

• Bachelor’s Degree in Instrumentation/Electrical/Chemical Engineering with relevant work experience as per above.

Other skills:

• A self-starter who can work independently, make sound decisions, analyse problems and provide focused solutions.
• Good understanding and knowledge of oil and natural gas industry standards such as, but not limited to, API (American Petroleum Institute), ISO (International Organisation for Standardisation),IEC, NORSOK, EU Directives ATEx, IECex requirements and other relevant standards related to Instrumentation Engineering.
• Effective verbal and written communication skills in English
• Experience in engineering of Oil and Gas offshore projects would be an advantage.
• Experience in SPI/Aveva Instrumentation would be an advantage.
• Applicant shall have strong computer literacy in commonly used business software applications such MS Word, MS excel, Teams etc.
  
  We regret that only shortlisted candidates will be notified.

About the role

The position is part of our Cyber Fusion Center’s managed support and operations team and is responsible for day-to-day support and operations of assigned cybersecurity solutions and platforms.

Job Responsibilities:

• Provide support for assigned security platforms, including onsite troubleshooting, root cause analysis, prepare and present incident reports.
• Provide security knowledge in security architecture recommendation and perform the necessary best configuration.
• Provide collaboration efforts in assisting the SOC teams in incident investigation.
• Manage ticket queue and take ownership and responsibility of tickets assigned, within agreed SLA.
• Perform change requests activities per change window allocated, including planning, review, tracking & verification and documentation.
• Ensure that daily operations and tasks are properly completed and followed up.
• Escalate issues and liaise with subject matter experts as required to resolve issues.
• Support after-office hours activities and standby requirements as necessary.
• Support shift rotation as necessary.
• Prepare activities report and work documentation.

Job requirements:

• Educational background in Information Systems, Cybersecurity or related disciplines.
• 2-5 years of hands-on engineering, support or operations experience in Infrastructure, Network or Security Tools
• Broad understanding of systems, network infrastructure; working experience with databases, LDAP and directory services, application servers, operating systems, and network infrastructure.
• Proficiency in one or more general-purpose programming languages (Perl, Python, PHP, Shell, PowerShell, Windows Scripting, Windows console programs, .Net, Yara, Regular expression) will be a plus.
• Certificates such as ITIL Foundations, Microsoft MCSA, CISA, CISSP will be a plus.
• Ability to work independently, under the general guidance.
• Support after office hour and during weekend/public holiday.

Responsibilities:

- Review technical documents and work together with sales managers to close sales

- Prepare technical calculation and commercial proposal in timely manner

- Provides technical assistance to clients relating to the design and use of products

- Maintain good customer business relationship

- Coordinate with regional partners

- Provide support to Outside Sales and work closely to achieve the sales target

- Monitor and update status of sales quotes and proposals

- Various other sales related tasks as assigned.

Requirements:

- Diploma in Chemical/ Engineering/ Mechanical/ Mechatronics discipline or equivalent

- Good understanding in Mechanical Instrumentation & Controls or Valve Automation

- Good communication, interpersonal and customer service skills

- Willing to learn and a good team player

Position title : Sales Engineer

• Location: Loyang Industrial Estate
• Working Days: Mon - Fri (830 a.m. to 530p.m.)
• Salary : $3,000 - $4,500 (depends experience)

Requirements

• Possesed Bachelor’s degree in Engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up-to-date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

From making valuable connections between people and businesses to building premium services that deliver high-value experiences, we are the teams who create all of Meta's products used by billions of people around the world. As Meta focuses on building the next evolution of social experiences, the team plays a crucial role in shaping the communication pathways that all sized businesses, especially small to medium ones, need to thrive in the new digital economic environment. And we achieve that from end-to-end product and technology innovation.

As a Software Engineer on the team at Meta, you can help build cutting-edge full-stack technologies that will transform the way people and businesses connect and communicate. You’ll help develop the next-generation of products that help us connect the next billion people, create new features that have billions of interactions per day and be a part of a team that’s working to help people connect with each other around the globe.

Responsibilities

• Full stack development with a variety of coding languages
• Create consumer products and features using internal programming language Hack
• Implement web or mobile interfaces using XHTML, CSS, and JavaScript
• Work closely with our PM and design teams to define feature specifications and build products leveraging frameworks such as React & React Native
• Work closely with operations and infrastructure to build and scale back-end services
• Build report interfaces and data feeds
• Sets direction and goals for the team regarding project impact, product quality and engineering efficiency
• Leads major initiatives, projects, teams, rollouts and phased-releases
• Helps to onboard new team members, provides mentorship and enables successful ramp up on your team's code bases

Minimum Qualifications

• 8+ years of programming experience in a relevant programming language
• 6+years relevant experience building large-scale applications or similar experience
• Experience with scripting languages such as Python, Javascript or Hack
• Experience leading major initiatives successfully
• Experience leading projects and teams accordingly
• Experience building and shipping high quality work and achieving high reliability
• Experience improving quality through thoughtful code reviews, appropriate testing, proper rollout, monitoring, and proactive changes
• Experienced in utilizing data and analysis to explain technical problems and providing detailed feedback and solutions
• Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience.

Preferred Qualifications

• Experience in programming languages such as C, C++, Java, Swift, or Kotlin

Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today—beyond the constraints of screens, the limits of distance, and even the rules of physics.

• Reports to Construction Manager
• Ensure all relevant permits and clearances obtained from respective agencies prior any excavation works
• Ensure all resources provided (manpower/equipment) comply with stakeholder’s requirement
• Coordination and liaison works with relevant authorities / agencies on services /stakeholder for utilities and diversion works
• Facilitate Permit-to-dig application from Client / Stakeholders
• Attend the meeting with the stakeholder/client
• Generate and handle company reports, meetings and documents required
• Propose alternative work method or other way to increase productivity
• Provide advise on appropriate measures on services / utilities protection and adopt safe work procedure to prevent damage to utilities
• Ensure the activities comply with the quality, environment, health & safety requirements

Job Requirements:

• Degree in Civil Engineering or its equivalent
• Minimum of 5 years relevant experience in road construction projects
• Possess basic understanding of Permit-to-Dig process and application
• Proficient in Microsoft Office and AutoCAD
• Attained BCSS/Confined space
• Qualified as a Licensed Cable Detector Worker (LCDW), Licensed Telecommunication Cable Detection Worker (TCDW)
• Registered Earthwork Supervisor (RES) with EMA/SPPG
• Ability to perform task under pressure and multi-task
• Hardworking and willing to learn
• Good interpersonal skills
• Past experience in LTA project (NSC) is an added advanatge
• Project: Viaducts
• Location: Woodlands

Senior Project Engineer is responsible for assisting the Project Manager on the progress of the projects/site works and manpower related aspects of the project. He/She is to oversee drawing management and make sure the updated drawings to the clients and subcontractor are issued. This also includes planning and coordinating technical engineering initiatives to make sure a project can be completed within budget and according to schedule, while upholding project standards by researching compliance regulations, developing project implementation plans and adjusting specifications for elements of a project.

Job Responsibilities:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, clients & main/sub-contractors and coordinate for site activities arrangement, design submission and work progress supervision
• Perform site inspection (excavation, structural, casting) and ensure that the work is carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors / foreman for works coordination with main/subcontractors and/or authorities and/or consultant on project progress and technical issues
• Assist in preparation of method statement and construction sequence for project implementation
• Assist Project Manager in Project Costing, monthly progress claims and monthly progress report
• Support Quantity Surveyor (QS) in verifying progress payments and claims
• Coordinating the handing-over of completed works to the client and completion of the necessary rectification works

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering
• At least 3-6 years of working experience in the related field is required

Project/Site Engineer is responsible for planning and coordinating technical engineering initiatives to make sure they can complete a project within their budget and according to a schedule, also to uphold project standards by researching compliance regulations, developing project implementation plans and adjusting specifications for elements of a project.

Job Description:

• To study tender / construction drawings, specifications and contracts to understand project requirements.
• Plan and schedule work sequences for construction operation, according to the Project Management Plan and master construction programme
• Liaise with consultants, client & main/sub-contractors and coordinate for site activities arrangement and work progress supervision
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering

JOB RESPONSIBILITY

• Responsible for building and facility services, system operations and maintenance program
• Ensure all the works are carried out safely and in accordance with safety work procedures
• Oversees the Building Automation System (BAS) and other systems within the BMS/BASCO/FRC room, including ensuring the smooth operation (within the acceptable limits and are run safely, effectively and economically) and timely rectification of the M&E equipment and responding to all alarms as part of the drive to achieve KPIs.
• Manage and assign Corrective Maintenance (CM) and Preventive Maintenance Work order (PM) using the CMMS (Computerized Maintenance Management System) to the maintenance staff accordingly.
• Lead the coordination and communication process of rectifying the faults between the maintenance staffs, vendors and contractors.
• Manage a team of technicians in attending to breakdown calls.
• Responsible to undertake maintenance program in accordance with the standards, all corporate policies and legislated regulations
• Develop working schedule / duty roster for the team.
• Ensure all building and facility systems are operational within the acceptable limits and are run safely, effectively and economically
• Responsible for conducting preventive and corrective maintenance program in accordance with the standards, all corporate policies and legislated regulations
• Liaison with OEM /system contractor for all building services & regularly solicit feedback from maintenance staff regarding fault status and feedback to users.
• Assists in Business Continuity, Emergency Operations and Exercises such as Fire Drill/Evacuation exercise, major equipment breakdowns, major power shutdown, disease outbreak and incidents where deemed to be of top priority. Activates Recall protocol for emergency situation.
• Provide feasible solution and coordinate with owners/users, consultants, vendors/contractors on engineering function requirement
• Conduct regular inspection of existing building equipment and its serviceability status
• Review service reports and escalate any finding or action that is required
• Assist in the Development, maintenance and the regular review and test of SOP/EOP
• Advice and lead the technical investigation / troubleshooting for rectification works
• Investigate and determine root cause of faults and report
• Prepare and submit regular reports to Management and Customer, with analytical findings and propose improvements.
• Provide training to technician /technical officers, and junior staff as necessary
• Undertake any ad hoc assignment requested or delegated by the AFM/FM as required for the operational needs
• Senior Grade level would have the below additional job responsibilities & deliverables:
  Participate in Ops Meeting and ensure follow-up items for BASCO issues (campus level) are closed in a timely manner.
  - Chairs BASCO Trade meetings with NUH Customer on a regular basis and to follow-up with delegation of tasks to ISS team to ensure completeness in follow-ups.
  - Lead the planning for BASCO coverage at assigned building and on campus wide for CERT requirements
  - Overall accountable for training and uplifting the competency and familiarity of BASCO team members on-site.
  - Target to reduce 15% month-on-month of Open RM items, by proposing practical solutions for customer to implement.
  - Perform on-boarding program for any new joiners to BASCO Team at NUH ISS. This can be done on a fixed-monthly frequency including existing staff as part of the refresher training.
  - Overall visibility & control of the BASCO team & performance at site. Key target is to hold internal bi-monthly meetings and foster camaraderie and team bonding among the team. Target is to establish full contractual compliant BASCO team and achieve 95% attendance rate.
  - Oversee and report the Emergency Recovery Equipment list at a cluster level and on a predefined frequency to ensure all equipment are operational functional and readiness.
  - Overall BASCO Lead during working / Shift Hours and leads in handling any key events / incidents, while working closely with other BASCO team members across the campus for manpower deployment, cross-support or coordination works.

JOB REQUIREMENT

• Degree in Mechanical Engineering / FM discipline with minimum 3 years experience; or Diploma in Mechanical Engineering / FM discipline with minimum 5 years of relevant experience;
• Preferably minimum 2-3 years of working experience in a facility management environment in a hospital / clean room / pharmaceutical will be preferred.
• Pro-active, ability to prioritize work and achieve desired result
• Independent, able to work with minimum supervision and have a good understanding of critical workflow
• Able to communicate and write well in English and Mandarin
• Able to work on Monday to Friday (Shift 1) 0700-1600 Hrs (Shift 2) 1100-2000 Hrs; Saturday 830am to 1230pm.

- Candidate will be required to Develop, design, program, upgrade software for Crane Safety Devise – Anti-Collision System.

- Troubleshoot & maintenance of Cloud & E-Platform for ACS.

- To provide software solution for our project specific requirements.

- Staying current with modern development practices, including continuously developing new skills as needs arise.

- Degree in Computer Science/Computer Engineering/Information Technology

- 3 years of experience in system analysis, design and programming.

- Ability to develop software in Java, C++, React or other programming languages

- Familiar with Autocad, PLC Programming & HMI Programming

- Strong analytical and problem solving skills.