Job Title: Production Quality Engineer (SLT Department)

This Production Quality Engineer role is in-charge of the daily operation inspection & assurance of the defined processes and procedures. Working environment inside a Semiconductor 100K cleanroom, System Level Testing Operation. Work with Production Quality Manager & Operation HOD to develop and implement quality standards and processes to meet customer and company requirements. Conduct daily tests to evaluate the accuracy and precision of products and production equipment. Prepare reports by analyzing, collecting, and summarizing data. Manage customer-specific requirements and offer technical support. Supervise daily workplace safety and quality practices. Teamwork with Production Engineers & Supervisors to ensure high quality standards for Operation.

Responsibilities:

• Production Quality daily inspection system ownership and assurance of processes pertaining to 100K clean room System Level Testing operation.
• Mange and deploy daily Production IQC & OQC operators/inspectors.
• Attend daily operation meeting, and present the Production Quality KPI.
• Report to Production Quality Manager on quality issues and provide updates/resolution.
• Ensure products meet quality standards and resolve quality issues with operation.
• Drive continuous improvement of quality standards and processes with operation.
• Evaluate skill levels of new QA inspectors, develop training materials, coach and train team members for improving team performance.
• Provide quality assistance in buyoff, installation and maintenance of company equipment.
• Document quality procedures and processes.
• Ensure compliance with ISO standards and support audit functions.
• Ensure safety requirement is strictly followed and all vendors must meet our safety expectation before commencement of work.
• Provide urgent/ad-hoc support for quality topics, even during off-office hours, so as to achieve continuous running of the operation.
• Develop cost-reduction initiatives while still maintaining high quality and productivity.
• Provide job assistance and conduct job trainings for employees as needed.
• Any additional tasks as assigned by the manager or management.

Requirements:

• Minimum Degree in Engineering or equivalent
• At least 3-5 years’ experience in managing high quality standards of Semiconductor 100K Cleanroom Testing operation.
• Able to demonstrate good communication, organizational, analytical and interpersonal skills
• Experience in implementing continuous improvement projects (Lean/Kaizen) and demonstrate resource planning capability.
• Experienced Production In-Process Quality Engineer who is highly effective working in a team-oriented matrix organization.
• Must have proven skills effective problem solving, troubleshooting and root cause failure analysis, on Production Quality management.
• Certification in Quality Standards is a plus point.

ECAS Consultants Pte Ltd

Established Civil & Structural Engineering Consultancy Firm is looking for:

Senior Resident Engineer (Tunnel) (LTA)

Degree in C&S Engineering.

Accredited by JAC of IES/ACES as RE(T)

Minimum 8 years of relevant experience as civil engineer

Minimum 4 years of relevant experience in supervision of LTA tunnel project.

Project Location: Maju Station

Please indicate your expected salary and your available date.

Please email resume and certificate, with expected salary and available date to: Email: [email protected]

Key Responsibilities:

• Manage and oversee multiple marine construction projects, from initiation to completion.
• Develop and implement project plans, schedules, and budgets.
• Coordinate with internal teams, contractors, and stakeholders to ensure project requirements and specifications are met.
• Monitor progress, identify potential risks, and propose solutions to ensure project milestones are achieved.
• Conduct site inspections and ensure compliance with safety, environmental, and quality standards.
• Prepare and review project documentation, including reports, drawings, and permits.
• Stay updated on industry trends and advancements to enhance project outcomes.
• Perform other duties as assigned to support project success.

Requirements:

• Prior experience in civil engineering or related projects; experience in marine construction is a plus.
• Strong interest in exploring and building a career in the marine construction industry.
• Excellent problem-solving skills and attention to detail.
• Ability to manage multiple projects and adapt to changing priorities.
• Proficiency in project management tools, Microsoft Office Suite, and CAD software.
• Strong communication and interpersonal skills to liaise effectively with teams and stakeholders.
• Willingness to travel and work on-site as required.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Position: Production Engineer / Executive

• Location: Tanjong Penjuru
• Working hours: Mon to Fri from 7:30am to 5pm
• Salary: $3,500 - $4,000

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

MAIN RESPONSIBILITIES:

The Field Service Engineer is responsible for providing technical field assistance in maintenance, operation, equipment installation and startup and/or shutdowns for all CPM processes. The Field Service Technician must have strong business and communications skills to establish and maintain strong relationships with the customer. Analytical and problem-solving skills are just as essential to this position.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Provide technical field assistance, in maintenance, installation, operation, and startup for CPM equipment; prepare customer field report after each trip.

· Perform inspections of existing CPM equipment during plant shutdowns, assist plant/contractors with recommended repairs/parts and provide each customer with a field report.

· Evaluate fabricated product when asked; prepare non-conformance report when necessary and work with internal and external customers to resolve issues.

· Provide technical training to relevant customer and responsible for tracking customer claim.

· Work integrally with internal employees and external customers to promote the CPM Aftermarket service, to meet group initiatives and objectives.

· Assist contractors in the erection of CPM equipment at customer site.

· Identify customer's needs and sales opportunities to help future growth.

· Participate in company meetings in order to increase communication, understanding, and teamwork.

· Cross train with engineers/technicians to learn technical processing information.

· Observe all customer and OSHA safety rules.

· Perform other related duties as required and assigned.

QUALIFICATION AND SKILLS:

· Associate degree or equivalent from a two-year college or technical school, preferably in Engineering.

· A minimum of 2 years of experience in animal feed or biomass related manufacturing industry.

· Good written and verbal communication skills.

· Establish and maintain effective working relationships with co-workers, customers, and vendors.

· High integrity and ethics.

· Working knowledge in AutoCAD.

· Required knowledge of Microsoft Office.

· Be able to communicate in English fluently and at least one local language.

· Ability to travel on need basis – domestically or internationally and up to 50% of the time.

SUMMARY

Direct Test Engineers I & II in operating within area of assigned responsibilities with a high level of efficiency, integrity and enthusiasm, striving to achieve excellence in all endeavors. Designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:

· Recruit and interview Test Engineers I & II.

· Communicate criteria to recruiters for Process Technician position candidates.

· Coach Test Engineers in the interviewing/hiring process.

· Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:

· Identify individual and team strengths and development needs on an ongoing basis.

· Create and/or validate training curriculum in area of responsibility.

· Coach and mentor Test Engineers I & II to deliver excellence to every internal and external customer.

Performance Management:

· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).

· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team members based on feedback.

· Express pride in staff and encourage them to feel good about their accomplishments.

· Perform team member evaluations professionally and on time.

· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.

· Coordinate activities of large teams and keep them focused in times of crises.

· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:

· Provide communication forum for the exchange of ideas and information with the department.

· Organize verbal and written ideas clearly and use an appropriate business style.

· Ask questions; encourage input from team members.

· Assess communication style of individual team members and adapt own communication style accordingly.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

Business Strategy and Direction:

· Know and understand the campus strategic directions.

· Define, develop and implement Test Engineering strategies, which contribute to the campus strategic directions.

· Provide regular updates to Assistant Test Engineering Manager on the execution of the strategy.

Cost Management:

· Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).

· Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.

· Provide feedback to Assistant Test Engineering Manager on cost and cost trends.

TECHNICAL MANAGEMENT RESPONSIBILITIES

· Perform duties, which involve conventional engineering practices that may include a variety of complex duties from ICT, FVT, ESS to System level test.

· Manage the engineering test function for standard and/or custom devices.

· Through subordinate supervisors or professional staff, identify and evaluate test procedures and test equipment required to perform quality checks.

· Compile and document data necessary to analyze performance and make recommendations for changes in the testing process.

· Assist/spearhead in the development of special test equipment and software text programs as required for the successful completion of project.

· Assist customer, setup training program for new product testing procedures.

· Provide training and assist test engineers.

· Act as the liaison and technical conduit for assigned customers.

· Explore new avenues and test technologies for quality improvements on product assigned.

· Perform detailed analysis on test quality of product assigned, identify trends and spearhead corrective actions.

· Monitor, through assigned test engineer, all NPI activities.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS

Bachelors of Science in Electronics or Electrical Engineering from a college or university; and five to ten years experience

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Support the selection and design of components for inspection systems.
• Accurate documentation and supplier compliance with specifications.
• Provide troubleshooting support and manage the integration of new designs into manufacturing processes.

Requirements:

• Proficient in CAD software for electrical and schematic design.
• Experience in designing, fabricating, and testing PCBs and PCBAs is beneficial

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

PM Singapore is currently looking to expand the CQV capabilities. This role will be supporting one of our many clients in the field of commissioning, qualification and validation work within the Life Sciences space.

Your day to day role would involve the following activities:

• Planning, Performance, and Coordination of Computer System Validation, Equipment Qualification, Temperature Controlled Objects (Freezers, Incubator etc), Clean Utilities Validation and cleaning validation in accordance with internal procedures and industry standards.
• The qualification includes, FAT, SAT, IQ, OQ, PQ of any additional modifications of existing manufacturing process equipment, package units (e.g. Ultrafiltration Unit, Chromatography Columns, autoclave, FIT testers), commercial off the shelves (COTS) analytical instruments, freezers,
• Create, review and approve equipment qualification and analytical instruments lifecycle documentations, e.g. FAT, SAT, IQ, OQ, PQ protocols and reports, risk assessments, technical specifications.
• Can lead investigation revolving around discrepancies identified during qualification activities.

We would like to hear from candidates who have:

• Relevant experience in validation activities (including the creation, pre-execution approval, execution, post-execution review, and post-execution approval of all validation lifecycle documents)
• Leading daily validation meetings with cross functional teams in resolving validation issues.
• Experience in equipment qualification including analytical instrumentation and manufacturing equipment.
• Work experience in Pharmaceutical or BioPharma industries
• Hands on validation execution experience
• Able to execute activities in cGMP environment, including cleanrooms or technical areas.

Position

We are looking for L2 Application Ops Engineer to join our Application Services department to help us implement DevOps and accelerate the bank’s transformation. This a very hands-on technical role to drive continuous improvement initiatives on top of day-to-day BAU support. We want someone with fresh and relevant ideas who is passionate about learning new things and wants to develop themselves further.

Mission

The L2 Application OPS Engineer is responsible to ensure production stability and contribute to the continuous improvement of the applications in scope. You will manage incidents, changes and requests as per the company's standards and SLA to ensure a high quality of service. You will also be involved in major operations as per the requirements of the bank.

As we are covering the bank’s global operations, you will work in rotational shifts* and also be occasionally doing on-call support** during non-business hours. You will also be occasionally required to work on planned activities on the weekends or public holidays as per our operational requirements. This will be an opportunity to have a better perspective of what can be further improved in production!

*Rotational shifts: Members in the team will rotate accordingly around 3 shifts (time will shift to an hour later during the daylight saving time period in the year).

**On call support: This covers 7 consecutive days during non-business hours to manage escalated incidents and to work on planned changes, weekend included.

• Morning: 7am-4pm
• Afternoon:2pm-11pm
• Evening: 5pm-2am

Main responsibilities

You will mainly be responsible for:

Performing all run activities in respect of the company's process, ensuring:

– SLA and priorities are respected

– Appropriate reaction, in line with the severity of an incident or escalation.

– The company process are dully followed (service request, change, incident, problem management)

– Management of technical issues, escalations and ensuring good level of delivery

– Primary operational technical support and assist the functional support teams

– Good collaboration between various teams within ITS and also BLI

Continuous improvement of service

– Propose improvement and solution to reduce repetitive tasks

– Improving complex operations (DRP, Migrations, Major maintenance etc.)

– Improving reliability and quality of our systems (automation, monitoring, alerting, security, RCA etc.)

– Reducing time-to-market by implementing CICD pipelines where possible

– Improve and standardize existing workflow processes and framework

– Bridging the gap between Dev and Ops

Managing knowledge within the team

– Share the knowledge within AS teams through the WIKI

– Promoting knowledge sharing within the organization (trainings, documentations etc.)

Driving the most complex operations & ensures they are well prepared (involvement on DRP test, WIP, etc…).

– Act as global coordinator main events.

– Review of major releases roadmaps

– Ensure post checks are documented, performed and report is shared

Qualifications and Profile

The position requires a minimum of 3 years relevant experiences as a production support or at least infrastructure support or development role.

Functional

• No functional skills required. Experience in a banking environment is obviously a plus.

Technical and process

• Preferred

• Minimum 3 years of experience with UNIX environments

• Minimum 3 years of experience in scripting languages such as Python, Powershell

• Minimum 2 years of hands on experience in any of these tools and technologies such as Ansible, Gitlab, Azure Devops, Docker, Kubernetes

• Experience with task schedulers such as Control-M

• Good understanding of IT ecosystems and application architectures

• Knowledge about

• CICD pipelines, ITIL practices, Agile practices, Lean

• Observability tools such as Grafana, Kibana, Prometheus, or Dynatrace is a plus

Soft skills

• Fluent in English, French is a plus
• Good analytical and problem solving skills
• Proactive and able to propose new ideas
• Positive attitude towards continuous learning and improvement
• Team player
• Curious about new technologies

Next Step

Prepare your updated resume and expected package.

Simply click on 'Apply here' or email to [email protected] to drop your resume

All shortlisted candidates will be contacted.

Prasant Sirohi

EA License Number: 91C2918

Registration Number: R22106307

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Will be part of Operation & Support Team to support Project implementation and Maintenance.

The key responsibilities are as below:

Job Description:

Project:

• Support Project Team in Project implementation
• System setup, configuration and testing
• Perform any other duties as assigned.

Maintenance:

• Perform CUAS Preventive and Corrective maintenance works at restricted Areas.
• Provide support services in operation exercise.
• Perform functional check and/or repair on testers and unit under Test.
• Perform any other duties as assigned.

Requirements:

• NITEC / Higher NITEC / Diploma in Mechanical, Electronics or Computer Engineering
• Fresh graduate are welcome to apply
• Experience in Electronics, PCB-related, electrical & networking would be advantageous
• Able to work over the weekend and standby for fault call if required
• Able to interpret schematics, technical manual and drawings for maintenance works.
• Ability to use analytical skills and a "hands-on" person.
• Good interpersonal skills, proactive and work well with others.
• Possess class 3 driving license will be advantageous.

Interested candidates can click on 'Apply' or send updated resume to [email protected]

We are regret that only shortlisted candidates will be notify

About the team:

MediaTek’s Physical design team is responsible to implement top quality digital backend design for our advanced process chips which have billions of transistors. Passionate talent who are eager to join this fast-growing IC design industry and grow together with our passionate team are welcome to apply!

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

Location: One North, Singapore

Important Note: This advertisement is meant to source suitable candidates for future openings for this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Job Scope:

• C# Development:
  • Develop web applications using C#, ASP.NET MVC, and .NET Core frameworks.
  • Apply MVC architecture principles to ensure clean, maintainable, and scalable solutions.
  • Implement secure and high-performance features in web applications.
• Web Application and API Development:
  • Design and maintain RESTful APIs for integration with web, mobile, and external platforms.
  • Optimize and troubleshoot existing APIs to ensure high performance and reliability.
• Mobile App Development:
  • Build cross-platform mobile applications using Flutter and Dart.
  • Ensure smooth integration between mobile apps and backend services.
  • Enhance mobile app performance and user experience through optimization techniques.
• Navision 365 Development:
  • Customize and extend Microsoft Dynamics 365 Business Central (Navision) to meet business needs.
  • Develop custom modules, workflows, and reports in Navision 365.
  • Troubleshoot and resolve Navision-related issues to ensure system reliability.
• Database Design and Management:
  • Design and optimize relational database schemas (e.g., SQL Server, MySQL)
  • Write efficient and secure database queries, stored procedures, and scripts.
• Testing and Quality Assurance:
  • Perform unit and integration testing to ensure code quality and functionality.
• Documentation:
  • Create/Maintain comprehensive technical and user documentation for developed solutions.

Requirement:

• Degree in Computer Science or related field
• Minimum of 2 years of professional development experience in C# and .NET technologies.
• Strong proficiency in C#, ASP.NET MVC, and .NET/ .NET Core.
• Experience with MVC architecture and building scalable web applications.
• Hands-on experience developing RESTful APIs and backend services.
• Knowledge in Flutter and Dart for cross-platform mobile app development.
• Knowledge in Microsoft Dynamics 365 Business Central (Navision) customization and integration.
• Solid knowledge of relational databases (e.g., SQL Server, MySQL, PostgreSQL).
• Familiarity with Git or other version control systems.
• Excellent problem-solving skills and attention to detail.
• Experience with cloud platforms such as Azure or AWS.
• Provide IT support/assistance in after-sales services.

Be a Part of Something BIG!

As a Senior Software Engineer in Core Engineering team, you will be responsible for building applications that run in the cloud or in the data centre to support both web and mobile apps. Using engineering best practices, the applications you build will be of the highest quality and confirm to development standards. The applications you write will be primarily written in the Java programming language with specialized services written in other languages such as JavaScript or Golang, Python, other. You will have a good understanding of building cloud-native applications on Kubernetes.

You will understand service implementation approaches that support consistent and eventually-consistent data models using synchronous and asynchronous techniques and understand the fundamentals of resource optimization and concurrency.

From time to time you will employ your technical experience in frameworks and databases to handle old code bases in order to transform legacy systems into cloud-native applications.

Make an Impact by:

• Development of High Performance Java Service API and Business Systems
• Using SpringBoot to build microsservices in Java
• Working with AWS Services to optimize your Java applications (SQS, SNS, SES, Lambda, S3, DynamoDB, RDS, and more)
• Contributing to common Java libraries, SDKs and Framework development
• Design database schemas and technical architecture
• Implement and following coding best practices and maintain high quality codebases
• Be a mentor for junior engineers

Skills for Success:

• BA in Computer Science or Computer Engineering
• 5-10 Years of experienced in Java 11+, SpringBoot, RESTFul Services, JSON API, Gradle, Linux, Kubernetes and AWS
• Understanding of Algorithmic Design
• Can work in small and large teams
• Ticking Systems
• Documentation Systems
• Testing Methodologies

Rewards that Go Beyond

• Full suite of health and wellness benefits
• Ongoing training and development programs
• Internal mobility opportunities

Your Career Growth Starts Here. Apply Now!

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Project Engineer / Senior Project Engineer (ELV/ Security System)

• Co-ordinate and work closely with the external parties and customers to plan, organize and execute the project related activities.
• Assist the manager in engineering works such as system designing, documentation, testing & commissioning (T&C) for ELV and security systems.
• Plan and develop the project schedules in compliance with customer requirements, deadlines, and/or milestones; develop efficient mechanisms to track the project progression in the field and update the schedules regularly to ensure that the activities are progressed within the schedules timelines.
• Responsible for all work site activities such as coordination and supervision works related to engineering works and systems design.
• Ensure timely completion of all the assigned projects particularly the T&C schedules.
• Responsible for project management related activities which include attend work site meetings, job coordination, system designs etc.
• Ad hoc duties as assigned.

Requirements:

• At least a Diploma in relevant fields.
• Minimum 2 years of relevant experience.
• Knowledge in Security System and ELV Systems e.g. PA system, Fire Alarm System, CCTV system, Card Access, Structure Cabling & etc.
• Familiar with BIM (Navisworks) and/or AutoCAD.
• Able to manage project cycle independently with minimum supervision.
• Knowledge in underground cabling work will be an added advantage.
• Entry level candidates are welcome to apply.

Remuneration:

• $2,800.00 - $4,500.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to:

[email protected]

for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,800.00 - $4,500.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

• Handle schedule work in accordance with the master and detailed work program.
• Manage technical and engineering problems.
• Liaise with consultants for technical issues and organise site activities with subcontractors.
• Maintain quality standards and perform site inspections and resolve technical issues on time.

Requirements:

• Degreein Civil Engineering recognised by Singapore PE Board.
• Registered Resident Engineer with IES/BCA.
• At least 3 years of relevant working experience preferably in handling LTA projects.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

What we are looking for:

- Skill set of an Asst Vice President (AVP Level) For MAS610 Financial Reporting System Support (Functional).

- Domain knowledge in MAS610, Finacial Accounting & Financial Reporting is a must.

- SQL Queries is a must

- Main duties are focused on ensuring MAS610 regulatory reports are provided to business users as per SLA.

- Work Hours: Mon – Fri, 9AM – 6:30PM (Includes monthly peak period 1st to 10th of each month – Ad-hoc weekend work during peak, off-in-lieu given)

Your team will support the BANKS Group Finance department to understand the business objectives, requirements and processes of the various Finance stakeholders and provide end-user maintenance of the Finance systems and related processes.

Job Scope:

The candidate will be part of Financial Information Management (FIM) within Group Finance under the System Production Support organization structure. The key responsibilities include:

• Ensure timely and accurate service delivery in accordance with Service Level Agreement
• Understand system set up implications due to changes in requirements or new products, and updates the necessary system configuration and procedure.
• Review and ensure operational problems, issues and queries are resolved promptly and satisfactorily
• Identify areas of improvements for implementations
• Gather requirements from stakeholders and work closely with IT and relevant stakeholders to support implementation including performing User Acceptance Testing

Job Requirements:

• Degree in Accounting / Finance/ Business or its equivalent professional certificates
• At least 5 years demonstrated experience in banking industry and conversant with current accounting policies and banking regulations
• Have a good understanding of technology and operational needs of one or more of the following subject areas:
• Financial accounting
• Financial reporting
• Regulatory reporting related to Finance and Risk within a banking environment to support MAS610 regulatory submission
• Aptitude for system related work, good knowledge of project planning and implementation including requirement gathering, system testing and system end-user maintenance
• Proven business analysis skills, including developing business / functional requirement, user test strategy and test scripts
• Strong capability in process control and operational risk management
• Experience in SQL, MS PowerPoint, Excel and Word
• Strong skills on data analysis via tools such as OBIEE, Power BI or Qlik Sense
• Proven team player with strong interpersonal skills, possesses drive, initiative and is a self-starter
• Strong communication skills and superior attention to details

Bloomberg is a global leader in business and financial information, news and insight, and we use innovative technology to deliver trusted data and bring transparency to the financial markets. Our customers around the globe rely on us for the information and tools they need to make critical investment decisions and remain connected across all sides of the financial community. And, to ensure the best experience for our 20,000+ employees across 176 offices globally, we provide the spaces and systems that allow our teams to work together with agility, productivity and collaboration, no matter where they are. Bloomberg Financial Solutions, a department of 5,000+ employees is at the forefront of ensuring success for our customers and employees alike. Our team comprises several key pillars: sales, service, operations, culture and brand. As a department, we are united by a common goal: We create meaningful relationships with clients by understanding their needs and delivering exceptional end-to-end support from sales and implementation, through their ongoing relationship with Bloomberg.

Bloomberg’s Multi-Asset Risk System (MARS) and derivatives data and valuation services (BVAL OTC) offers a comprehensive suite of risk management tools that delivers consistent, consolidated results across our clients entire firm. MARS is powered by Bloomberg’s world-class pricing library, market data and mortgage cash flow engine, and together with BVAL OTC enables front office, risk, middle office, collateral managers and other financial professionals to analyze their trading and investment portfolios, manage and mitigate their exposure and ready themselves for any turn of events.

What's the role?

As a key member of our APAC Sell-side Solutions Sales team, you'll be responsible for sales of the suite of solutions under the Bloomberg MARS and BVAL OTC offering. You'll work closely with clients and prospects to gain a clear understanding of their business needs, build strong relationships, and provide consultative solutions.

You will have a broad knowledge of fixed income and derivative markets, with a solid grasp of the regulatory landscape. You will be comfortable engaging with a range of players across organizations from banks, securities houses to interdealer brokers and exchanges. You’ll be familiar with their technical architecture, data flow, systems and workflows: who uses what and for what purpose. You'll be a good listener; able to demonstrate a genuine interest in our clients. You’ll be comfortable interacting with C-level executives, be experienced with long selling cycles, and be confident in communicating how our pricing, risk management and regulatory solutions will contribute to our clients' overall business goals.

We'll trust you to:

• Manage the sales engagement smoothly from beginning to end
• Establish and execute a pipeline building strategy for your target market
• Balance multiple engagements across the sales life-cycle
• Use market, product and technical expertise, and contribute innovative ideas that anticipate to identify and address client needs
• Build relationships across client organizations to ensure that all stakeholders are managed appropriately as part of the sales process
• Leverage your knowledge to build and maintain credibility with clients
• Act as a subject matter expert in derivatives, valuations, risk management and regulations
• Be able to produce clear, concise proposals and presentations that identify client needs, current workflows, proposed solutions and commercials
• Work with internal product teams to recommend enhancements to our range of client solutions
• Collaborate across different product and sales teams to deliver the right suite of solutions for each client
• Participate actively in new projects that drive departmental and firm-wide initiatives and goals
• Seek out additional ways to make an impact, such as mentoring, involvement in training, running campaigns, and active involvement in product improvement

You’ll need to have:

• 5+ years of experience in financial services technology solutions sales where you have met or exceeded demanding targets
• Demonstrable experience working with derivative products, gained from experiences as either a market participant, technology solutions support specialist or sales specialist within the past 5 years
• Demonstrated work experiences advising or adhering to regulatory requirements, with strong understanding of sell-side and risk management workflows and concepts such as, Credit Risk, Market Risk, XVA, VAR etc.
• Consultative sales approach and experience building relationships with senior level customers
• Demonstrated continuous career growth within an organisation
• Ability to engage and collaborate with other teams internally
• Aptitude to excel in a fast paced, rapidly growing environment
• Exemplary presentation and communication skills in English
• A willingness to travel is essential. Our clients are located all over ASEAN
• Bachelor’s degree or degree-equivalent qualifications

We’d love to see:

• Familiarity with the Bloomberg Professional Service
• Professional working proficiency of an additional Asian language

What’s It Like To Work Here?

We work hard. We are ambitious and set ourselves tough business goals. We are a meritocracy where everyone has a voice - not a job title. Working with people you trust, respect, and can collaborate with is more important than titles or position. Things move fast, and we want people who will enjoy working in this environment and feed off the energy. But it isn’t all about work. Giving back is one of our core values, and there are many ways to get involved in philanthropic initiatives from helping local school kids with their reading to helping clean up local parks and waterways.

If this sounds like you:

Apply if you think we're a good match. We'll get in touch to let you know what the next steps are, but in the meantime feel free to have a look at this: https://www.bloomberg.com/professional/product/risk/mars/

Why Bloomberg?

We’re individuals with diverse backgrounds, talents, and experiences who take on big challenges and create even bigger impact through our work. We’re interested in what makes you you, and how we can create opportunities for you to channel your unique, personal energy and grow to your fullest potential.

Learn more about our office and benefits:

Singapore | www.bloomberg.com/singapore

Bloomberg is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of age, ancestry, color, gender identity or expression, genetic predisposition or carrier status, marital status, national or ethnic origin, race, religion or belief, sex, sexual orientation, sexual and other reproductive health decisions, parental or caring status, physical or mental disability, pregnancy or maternity/parental leave, protected veteran status, status as a victim of domestic violence, or any other classification protected by applicable law.

Bloomberg provides reasonable adjustment/accommodation to qualified individuals with disabilities. Please tell us if you require a reasonable adjustment/accommodation to apply for a job or to perform your job. Examples of reasonable adjustment/accommodation include but are not limited to making a change to the application process or work procedures, providing documents in an alternate format, using a sign language interpreter, or using specialized equipment. If you would prefer to discuss this confidentially, please email [email protected] (Americas), [email protected](Europe, the Middle East and Africa), or [email protected](Asia-Pacific), based on the region you are submitting an application for.

• Position: MIS Executive (Management Information Systems)
• Location : Tai Seng
• Working Days : Monday - Friday
• Working Hours: 9am-6pm
• Salary : $3,500 - $4,000

Roles & Responsibilities

IT Shared Services Support

• Provide end-user support for system functional, operational and technical basis; assist in troubleshooting, testing and maintenance.
• Manage timely updates, patching, system housekeeping, and backups.
• Research, identify, and support the implementation of new technologies.
• Configure, install, and support software and business applications in Windows environments.
• Conduct 1st and 2nd level troubleshooting and application setup for business units.

Business Function & ERP Support

• Maintain and provide end-user support for management and hospitality systems, including ERP, CRM, POS, and network equipment.
• Oversee day-to-day operations of Microsoft Dynamics Business Central for seamless performance.
• Configure and optimize Microsoft applications, including SharePoint, Business Central, and Office 365.
• Train users on Business Central for effective system usage and role proficiency.
• Customize Business Central reports, dashboards, and interfaces to align with business needs.

Database Management and Reporting:

• Maintain and optimize databases; manage data collection and reporting in Business Central to keep information accurate and accessible.
• Integration Management: Coordinate integrations between Business Central and other systems (POS, CRM) to enable seamless data flow for financial reporting and timely insights.
• Inventory Management: Track and manage inventory in Business Central, collaborating with F&B outlets to prevent shortages or overstock and ensure proper bill of material setup.
• Security and Compliance: Ensure data integrity, security, and compliance within Business Central.
• Data Migration and Updates: Oversee data migration and updates during system upgrades or transitions from legacy systems.
• System Upgrades and Testing: Manage system upgrades, test functionalities, and maintain the latest version with minimal disruptions.

Project Implementation Support:

• Manage User Acceptance Testing (UAT), user training with vendors, stakeholders, and end users, track application issues and upgrades closely.
• Maintain IT project training documentation and user guides.
  
  Requirement
• Minimum diploma in Engineering (Computer/Telecommunication), Computer Science, Information Technology, or a related discipline
• Proficient in MS Office Full Suite including NAV ERP and Office 365, Windows server setting up, MySQL, IT Domain knowledge.
• Knowledge of F&B or Retail business IT workflow and ERP system interface.
• Prior project experience related to IOT tools on F&B Manufacturing & Distribution would be advantageous.
• Experience in Enterprise Resource Planning implementation and maintenance.

Interested Personal kindly contact WhatsApp :+65 8833 7969(Lydia)

OR

Email to : [email protected]

The Supreme HR Advisory Pte Ltd

Reg No: R1988890

EA No: 14C7279

• Working days: Monday - Friday + Alternate Half Sat WFH (if busy)
• Working hours: 9am - 6pm
• Location: Marina Square (Promenade MRT)
• Salary: $3000 - $4000

Responsibilities:

• Provides CAD design services in support of client requirements and modifications.
• Updates and issues CAD space plans.
• Generates component breakdown for the sales department for quotations and orders.
• Provides 3D rendering for presentation.
• Prepares presentation boards.
• Site audit on existing components, and communicate churn requirements to the customer.
• To measure the site for space planning.
• Assists and coordinates mock-up preparation.

Requirements:

• Candidate must possess at least a Diploma certificate.
• Design and system furniture background experience would be preferred.
• Must be proficient in AutoCAD operation and 3D Modeling.
• Must understand drawing standards.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Space Planner

• Working days: Monday - Friday + Alternate Half Sat WFH (if busy)
• Working hours: 9am - 6pm
• Location: Marina Square (Promenade MRT)
• Salary: $3000 - $4000

Responsibilities:

• Provides CAD design services in support of client requirements and modifications.
• Updates and issues CAD space plans.
• Generates component breakdown for the sales department for quotations and orders.
• Provides 3D rendering for presentation.
• Prepares presentation boards.
• Site audit on existing components, and communicate churn requirements to the customer.
• To measure the site for space planning.
• Assists and coordinates mock-up preparation.

Requirements:

• Candidate must possess at least a Diploma certificate.
• Design and system furniture background experience would be preferred.
• Must be proficient in AutoCAD operation and 3D Modeling.
• Must understand drawing standards.

Interested Personal kindly contact WhatsApp :+65 8833 7969(Lydia)

OR

Email to : [email protected]

The Supreme HR Advisory Pte Ltd

Reg No: R1988890

EA No: 14C7279

Sales Executive

Location: Nearest MRT: Nicoll Highway/Bugis

Working Hours: 5.5 days (Mon – Fri, 9am – 5pm & Sat 9am – 1pm)
Salary: $2800 - $4500 (Starting pay will be based on job experience)

This company is the general service administration for Saudi Arabian Airlines which includes both inbound and outbound services such as Accommodation, Transportation, Sightseeing Tours, Accommodation, Visa Services, Air Ticketing.

Job Description

1. Building and maintaining relationships with our agents and clients.
2. In charge of updating our social media platforms with updates, promotions, advertising campaigns and any other information that would further our market presence.
3. Work with the team and top executives to plan and create marketing and future sales strategies.
4. Do regular reports of agent visits, complaints, etc. Analyze previous sales data trends to design sales strategies and set sales goals.
5. In charge of handling BSP whenever required.

Job Requirements

1. Experienced in GDS System, preferably Amadeus / Galileo will be an advantage.
2. Knowledge in ticketing system is a bonus.
3. Candidates with no prior experience are welcome to apply.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Space Planner

• Working days: Monday - Friday + Alternate Half Sat WFH (if busy)
• Working hours: 9am - 6pm
• Location: Marina Square (Promenade MRT)
• Salary: $3000 - $4000

Responsibilities:

• Provides CAD design services in support of client requirements and modifications.
• Updates and issues CAD space plans.
• Generates component breakdown for the sales department for quotations and orders.
• Provides 3D rendering for presentation.
• Prepares presentation boards.
• Site audit on existing components, and communicate churn requirements to the customer.
• To measure the site for space planning.
• Assists and coordinates mock-up preparation.

Requirements:

• Candidate must possess at least a Diploma certificate.
• Design and system furniture background experience would be preferred.
• Must be proficient in AutoCAD operation and 3D Modeling.
• Must understand drawing standards.

Interested Personal kindly contact WhatsApp :+65 8833 7969(Lydia)

OR

Email to : [email protected]

The Supreme HR Advisory Pte Ltd

Reg No: R1988890

EA No: 14C7279