Job Description – Service Technician

We are looking for a Service Technician in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Technician shall report directly to the Service Engineer/Maintenance Lead (Reporting Officer (RO)) and Maintenance Manager (Approving Officer (AO)). Hiring shall be 1 year services contract via agent arrangement with option to extend or convert to direct outsource or permanent hiring.

Responsibilities

· Assist the RO in providing Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks.

· Provide update and feedback on PM & CM work including maintenance documentation such as PM & CM checklist and status update to RO for maintenance report consolidation and generation to AO for review and final release to customer.

· Attend to and conduct on-site CM to faults reported/raised by customer on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment.

· Perform on-site PM to system equipment based on planned scheduled including O-level testing and sensors calibration to ensure optimal operational performance.

· Work with OEM on fault findings on-site and off-site including D-level components repair by sub-contractor

· Convey updates to RO on maintenance tasks progress.

· Review with RO and AO on maintenance processes and resources etc. for maintenance improvement.

• Perform any other related duties as assigned by RO/AO.

Requirements

· Holding recognised Professional Certificate such as Nitec/ Higher Nitec/ Diploma in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution; or at least 3-years working experiences in above mentioned engineering fields.

· Both local and foreigner as well as fresh graduate would also be considered.

· Advantage if have some knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting

· Resourcefulness and logical in problem-solving aptitude.

· Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc

· Ability to work as a team and occasionally independently.

· Ability to conduct on the job risk assessment and provide advisory to team member, RO and AO.

· Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).

· Self-motivated, self-discipline and a service mindset with commitment and willingness to learn.

· Able to start work immediately or within a short notice is an advantage

• Field service work / Workshop repairs: attend site and perform field work, i.e. breakdowns, preventative maintenance, install and commissioning. Workshop tasks: dismantling, assembly, cleaning of parts and using of precision equipment and machinery and apply safety and health rules and taking into consideration the actual site conditions.
• Planning / Coordination: preparation and control of all material, equipment and documentation needed for site activities and organized them in accordance with contractual and supplement documentation.
• Repair: conducts detailed inventories and inspections to determine necessary maintenance and reports. Troubleshoots and repairs equipment and recommends changes such as new equipment or modified procedures to improve performance and customer satisfaction.
• Reporting: prepares all technical and work reports to be signed by customer representative.
• Customer Regulation: obtaining certain passes or attending classes for commencing of works.

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

Job Description

• To be able read Hydraulic Circuit Drawings

• Experience in Heavy machinery related to hydraulics such as crane, winch & HPU tc..,

• Experience working in any Marine Vessel /Ships

• Has Knowledge in Instrumentation & Motor Control

Job Requirement

• ITE in Mechanical

• Able to write Service Report

• Able to follow the safety procedure

• Computer Literate

• Can work independently

• Willing to work overseas & accept offshore/onboard assignment

Job Benefits

• Excellent learning environment

• Training Provided

• Onboard Allowances

• Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• Annual leaves starting with 14 days and up to 21 days

Working location:

15 Kwong Min Road

Singapore 628718

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

· Involve in hands-on execution of the plant operations and assist Manufacturing

· Associates in troubleshooting

· Monitor and analyse processing parameters for atypical trends and improvement opportunities

· Perform solution and equipment preparation

· Stage components for autoclaving and washing

· Support in-process testing of production samples, prior experience with analytical instrument will be a plus point

· Actively support continuous improvement initiatives

· Support Safety audits

· Adhere to any applicable EHS and regulatory requirements

· Ability to follow written procedures, recognize and report malfunctions

· Evaluate documentation/data according to company and regulatory guidelines

· Engage & interact with inspectors (internal and external)

· Interpretation and application Good Manufacturing Practice (GMP) knowledge is required

· Basic statistical mathematical skills

· Ability to organize work and handle multiple priorities and meet deadlines

· Need to understand, apply and evaluate basic chemistry, biology and physical principles

· Understanding of analytical methods

Basic Qualification:

· Diploma in Science or Engineering

Preferred Qualification:

· NTC/ITC/Diploma in Chemical, Pharmaceutical, Life Sciences or Bio-processing related disciplines

· Fresh graduates are strongly encouraged to apply.

· Proficiency in reading and writing English

· Demonstrate commitment to cGMP, EHS compliance aspects of clean-room plant operation, prior experience and demonstration of cGMP knowledge is a plus

· Knowledge of plant and unit operations (autoclave, parts washers, process equipment), good problem-solving skills

· Excellent self-motivated team player with hands-on attitude and good communication skills

· Experience with Emerson DeltaV, LIMS, TrackWise

· Should understand, apply and evaluate basic chemistry, biology and physical principles

· Required to work any shift in support of operations that may include 24/7

· Mechanical ability/expertise

Job Description

• To be able read Electrical/Instrumentation Drawings

• Experience in Electrical wiring troubleshooting

• Has Knowledge in Instrumentation & Motor Control

Job Requirement

• ITE in Electrical

• Able to write Service Report

• Able to follow the safety procedure

• Computer Literate

• Can work independently

• Willing to work overseas & accept offshore/onboard assignment

Job Benefits

• Excellent learning environment

• Training Provided

• Onboard Allowances

• Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• Annual leaves starting with 14 days and up to 21 days

Working location:

15 Kwong Min Road

Singapore 628718

Job Description

• Efficiently and effectively manage and operate assigned processing or packaging operation according to the standardized operating procedures, guides and manual
• Ensure the correct cleaning and sanitation of processing equipment are rendered following Good Manufacturing practices

Job Requirement

• A good team player to achieve production targets
• Self motivated and work with least supervision
• Able to be on the feet for long hours
• Transportation provided
• Candidates with relevant experience are preferable
• More focused on attitude rather than educational level
• 5.5 days week with OT's & perks

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Responsibilities:

• Operate the Combined Cycle Power Plant safely, efficiently, and in accordance with established operational guidelines to meet output requirements.
• Prepare for, execute, and monitor the startup, shutdown, and routine operations of generation units and auxiliary systems.
• Carry out condition monitoring, review operating parameters, and correct deviations to maintain optimal plant performance.
• Identify, report, and rectify all system, plant, and equipment defects.
• Ensure adherence to the plant’s generation dispatch schedule, conducting operational tests and inspections as required.
• Respond to plant emergencies, equipment failures, and outages.
• Manage generating unit operations and maintenance activities, ensuring compliance with safety measures and specifications.
• Monitor work areas and inspect tools and equipment to detect and prevent unsafe conditions or violations of procedures and safety rules.
• Prepare daily shift log reports and other operational reports.
• Liaise with external agencies (e.g., EMA PSO, PUB, NEA, SCDF) on operational matters during shift duty.

Requirements:

• Nitec in Mechanical, Electrical Engineering or an equivalent discipline.
• Knowledge of plant processes, operations, and safety protocols.
• Relevant experience in power plant operations, or related industries, is advantageous.
• Possession of a 2nd Grade Engineer (Steam) Certificate of Competency or a 1st Grade Engineer (Steam Combustion Engine) Certificate of Competency awarded by the Ministry of Manpower is an advantage.
• Proficiency in Microsoft Word, Microsoft Excel, and Maximo EAM or equivalent software.
• Strong analytical and communication skills, self-motivated, independent, and a team player.
• Willingness to work 12-hour rotating shifts.

The incumbent is responsible to:

• Assist the pharmacist in the processing of medication orders for inpatient and outpatient dispensing which includes typing, packing, labelling and distribution of drug supplies to the wards and other hospital departments
• Perform billing functions and ensure that cost and revenue of all stocks supplied are recovered
• Dispenses medicines under the supervision of a pharmacist
• Monitor and maintain inventory stock level of drugs in the areas of work
• Receive, unpack and check deliveries against the appropriate documents, to ensure that items supplied are correct and accounted for
• Perform stock receipts and issues strictly in FIFO order
• Assist in providing quality customer service
• Maintains the cleanliness of the work areas and prepare these for daily operations
• Assist in orientating new staff assigned to the section
• Supports the hospital by participating actively in the various activities organized by the hospital

Job Requirements:

• Certificate in Pharmacy Technician Course or a Diploma in Biomedical Science (Specialization in Pharmaceutical Science Technology) or Diploma in Pharmaceutical Science and relevant experience
• Able to work staggered shift duties Job

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Roles and Responsibilities

• Analyse and define detailed functional specification based on the functional and non-functional requirements document
• Collaborate with Functional Business Analyst and Business Unit to clarify with functional and non-functional requirement
• Work closely with architecture team to define project target state and specification
• Collaborate with business and IT to analyse, elicit and review business requirements
• Participate and contribute to technical solutioning and architecture reviews with architecture team
• Define functional and non-functional requirements and perform impact analysis assessment with the vendor
• Perform detailed estimation of projects and change requests
• Facilitate communication between vendor, project team, business stakeholders and internal IT team
• Conduct FDS review / Write and review user stories with Functional Business Analyst and Business Unit for signoff
• Review interface design specifications created by development team
• Review test strategy and functional test cases created by testing team
• Support project and delivery team all throughout the project implementation
• Monitoring and manage risks /issues related to requirements and scope creep

Skills

• Bachelor’s Degree in related disciplines or equivalent experience
• 8 to 12 years of relevant Business Analysis experience related to Pre-Payments, Core-Payments processing and Post Payment processing, eg, Local, Interbank(G3, DuitNow, FPS, PromptPay, PayNow, BI Fast) &, Cross Border Payments (Swift, other payment providers like Bank of New York)
• Relevant experience in Banking / Finance / IT; good knowledge in financial services policies, procedures, products and industry practices.
• Good knowledge in channel products for wholesale banking focusing user experience/journey, validation and processing will also be preferred
• Advantageous to have hands-on experience to configure Payment product/systems from vendors like FIS, etc
• Good Open API knowledge for design and delivery
• Excellent communication and inter-personal skills to manage functional and technical stakeholders across multiple business units.
• Able to work independently with minimum supervision
• Ability to work in a fast-paced, team-oriented environment
• Strong problem solving and analytical skills
• Proven results-oriented person with main focus on delivery
• Good understanding and experience in standard Software Development Life Cycle (SDLC) and Agile development methodology.
• Strong negotiation skills.

Roles and Responsibilities

• Analyse and define detailed functional specification based on the functional and non-functional requirements document
• Collaborate with Functional Business Analyst and Business Unit to clarify with functional and non-functional requirement
• Work closely with architecture team to define project target state and specification
• Collaborate with business and IT to analyse, elicit and review business requirements
• Participate and contribute to technical solutioning and architecture reviews with architecture team
• Define functional and non-functional requirements and perform impact analysis assessment with the vendor
• Perform detailed estimation of projects and change requests
• Facilitate communication between vendor, project team, business stakeholders and internal IT team
• Conduct FDS review / Write and review user stories with Functional Business Analyst and Business Unit for signoff
• Review interface design specifications created by development team
• Review test strategy and functional test cases created by testing team
• Support project and delivery team all throughout the project implementation
• Monitoring and manage risks /issues related to requirements and scope creep

Skills

• Bachelor’s Degree in related disciplines or equivalent experience
• 8 to 12 years of relevant Business Analysis experience related to Pre-Payments, Core-Payments processing and Post Payment processing, eg, Local, Interbank(G3, DuitNow, FPS, PromptPay, PayNow, BI Fast) &, Cross Border Payments (Swift, other payment providers like Bank of New York)
• Relevant experience in Banking / Finance / IT; good knowledge in financial services policies, procedures, products and industry practices.
• Good knowledge in channel products for wholesale banking focusing user experience/journey, validation and processing will also be preferred
• Advantageous to have hands-on experience to configure Payment product/systems from vendors like FIS, etc
• Good Open API knowledge for design and delivery
• Excellent communication and inter-personal skills to manage functional and technical stakeholders across multiple business units.
• Able to work independently with minimum supervision
• Ability to work in a fast-paced, team-oriented environment
• Strong problem solving and analytical skills
• Proven results-oriented person with main focus on delivery
• Good understanding and experience in standard Software Development Life Cycle (SDLC) and Agile development methodology.

JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Candidate must have minimum 3 year exprience in lift industrie.

Candidate must stay at the Dormitory with Existing Employees

and also need to follow transportion company Vahicle.

Candidate Some time need to work in nightshift.

Candidate need to work a day muiltiple area.

Candidate must need to take care the tools.

Electrical Technician - European MNC

3 months contract (Project)

Salary: $4500 max

5 days work week

8am - 5pm

Location: Gul Circle

Job Scope:

• Installs and repairs electrical wiring, systems, and fixtures in buildings.
• Installs conduits and pipes to house electrical wires and cables.
• Ensures piping complies with electrical codes.
• Installs circuit breakers and other electrical hardware and connects wiring to them.
• Connects electrical systems to powerlines to provide electricity to the building.
• Tests electrical systems to ensure proper installation and operation.
• HVAC experience added advantage

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

Why Patients Need You

Whether you are involved in the design and development of manufacturing processes for products or supporting maintenance and reliability, engineering is vital to making sure customers and patients have the medicines they need, when they need them. Working with our innovative engineering team, you'll help bring medicines to the world even faster by imagining what’s possible and taking action.

What You Will Achieve

Working with Pfizer’s dynamic engineering team, you will play a critical part in managing the maintenance and reliability engineering activities involving the redesign, maintenance, and repair of utilities systems, buildings, and production/non-production equipment.

Your prior work experience and ability to apply your breadth of knowledge will help you adapt the standard methods and procedures. You will help us identify required delivery and process improvements that drive increased efficiency, throughput and quality. You will arrive at decisions on which methods and procedures are the best fit for different work situations.

It is your hard work and dedication that will make Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Knowledge of mechanical equipment operations and maintenance skill and knowledge with experience in working in a team
• Hands on experience in pump overhaul (Centrifugal, Diaphragm etc.).
• Performance matrix environment.
• Knowledge of Computer Maintenance Management System (CMMS), current Good Manufacturing Practice (cGMP) and Right First Time technique.
• Able to demonstrates clear and concise written and verbal communication.
• Knowledge in Mechanical Equipment Troubleshooting and Analysis Skills.
• Knowledge and able to create Job Safety Analysis (JSA) / Risk Assessment (RA) in document system.

Qualifications

Must-Have

• Minimum 5 years of relevant experiences in pharmaceutical, chemical, or petrochemical industries for Senior position and Minimum 2 years for Junior position.
• High School Diploma or GED
• Willing to work in 12 Hours rotating shift.

Work Location Assignment: On Premise

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Systems analysts are computer software experts who assess the current state of a company's systems and work to implement new ones to improve performance and efficiency. If you're interested in information technology (IT) and working with software, learning about the typical responsibilities of a systems analyst can help you determine if the role is right for you. Understanding which industries hire these analysts and what skills they have can also aid you in preparing for career success.

JOB REQUIREMENTS:

• Reviewing current IT systems, such as network, software and hardware features for any errors or issues

• Collaborating with employees and department heads to determine which system requirements they need to remain efficient

• Building new systems that address and fix any issues shown in the current systems

• Creating analysis reports that represent the cost-benefit of any proposed upgrades

• Assisting the IT team in implementing any new system that was recently drawn up and approved

• Testing and troubleshooting any recently implemented plans to ensure they're operating efficiently

• Instructing other employees on how to use these new systems through training programs and documents

• Submitting and implementing all systems under strict deadlines and budget restrictions

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

Job Description:

• Investigate, troubleshoot and resolve IT-related issues (including software, hardware, systems, networks, printers and scanners).
• Support all IT infrastructure and operations within the company, while ensuring the security and privacy of networks.
• Manage vendors on IT matters such as issue escalation and projects.
• Provide support in the operation of all technologies including office networks.
• Setting up and maintaining of equipment
• Ensure security and privacy of networks and computer systems.
• Establish and ensure proper IT asset tracking including hardware and software licenses.
• Maintain IT Systems, inventory, and infrastructure documentation.
• To assist the team in all IT-related duties and activities.
• Setting up accounts for new users n management of dc
• Support HR in onboarding new joiners to set up their computers and run through an IT induction on their first day.

Job Requirements:

• High Proficiency in MS Office
• In-depth understanding of diverse computer systems and networks
• Good knowledge of internet security and data privacy principles
• Basic understanding in TCP/IP and LAN technology
• Knowledge of Windows
• Translate business requirements, questions, problems related to innovative and effective IT solutions related to Mid-range workflow, ECM and middleware systems.
• Proactive team player with the ability to work independently with minimal supervision
• Good communication and problem-solving skills
• Must be able to commit to 5 work days and 1 Saturday (half-day) per month.

Job Info:

• Salary: Basic up to $2800 + Performance Bonus + OT
• Working Hours: Monday - Friday (9am - 6pm)
• Location: Tampines

Job Scope:

• To support the provision of plans and layout advice for projects
• To aid in the procurement of AV hardware and software, ensuring project needs are adequately addressed
• To strategize, maintain, and monitor project timelines, intervene promptly, and oversee the storage and transportation of equipment
• To execute rack & stack, onsite installation, device/software upgrades, troubleshooting, and equipment repairs, as well as contribute to in-house projects at customer premises
• To conduct electrical wiring and trunking, perform programming, and engage in basic construction of setups (may involve the use of a ladder)
• To oversee the management, testing, and commissioning of CCTV, ELV equipment, Bluetooth devices, and other necessary devices
• To ensure the timely completion of testing, configuration, staging, and project upgrades
• To assist management in other company projects when required, such as cabling and logistics

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Purpose of the Job:

• Responsible for vehicle repair, diagnostic, service maintenance.
• Ensure all assigned jobs are carried out according to Company's Quality Standards.

Job Duties:

• To carry out Maintenance checks, basic annual preventive maintenance for trucks
• To perform all repairs (With guidance from Team Leaders where appropriate)
• To ensure Utilization, Efficiency and Productivity is achieved.
• To record repair time and detail of repair in the Work Order.
• To keep Team Leader updated on the repair details and repair requirements.
• Understand and adhere to Warranty Process and Procedures (Warranty tagging of parts, return and storage of warranty parts etc)
• Ensure good housekeeping of work bay.
• Accountable for all tools and equipment handling and usage.
• Ethical compliance of genuine parts replacement and service rendered according to the checklist and scope of works.
• Ensure all service and repairs are performed thoroughly and in accordance with good quality practice and procedures adhering to manufacturers standard
• Lead by example to ensure high level of Health & Safety performance within the area of responsibility.
• To attend to breakdown where necessary and to be equipped with a valid Class 3/4 driving license.
• Any other duties assigned by your immediate superior.

Job Requirements:

• Minimum of 3 – 5 years working experience in servicing and repairing heavy trucks
• Basic Vehicle Principles and Concepts.
• Basic engine, transmission and brake system knowledge.
• Multi-meter basic electrical values.
• Knowledge in vehicle electrical circuit diagram.
• Preferred with valid Class 3 / 4 / 5 driving license
• Able to be on 24/7 on standby

Interested applicants, please send resume to [email protected]

Liz Ooi Li Chen (R1104561)

Recruit Express Services Pte Ltd

EA License No: 13C6614

We regret that only shortlisted candidates will be notified. Thank you.