Job Highlights

• 5.5 working days
• with OT
• Medical Benefits
• Company Shuttle Bus

Position objective and summary

• To ensure all waste types are properly identified, received, sorted, treated and disposed of within regulatory requirements
• Monitor, plan and organise the waste/wastewater treatment system processing activities
• Submit reports on performance and progress.
• To ensure Evaporator systems running smoothly with pre-set parameters

Main tasks / activities / responsibilities

• To operate the Evaporator systems safely according to protocol, work procedures & SOPs and to advise line supervisor of any abnormality
• Assist with incoming waste management and system & equipment maintenance
• Conduct sampling of treated waste samples as instructed by line Lead
• Work with Line Lead, Operation Manager and Consultants to eliminate any possible bottlenecks in waste treatment procedures
• To ensure company’s treatment procedures are in line with regulatory requirements

Job requirements

• Willingness to communicate & build rapport with team of diverse cultures
• Solid organizational skills, including multi-tasking and time management
• Experience working in EHS and Permit-To-Work system
• Able to work independently
• Willingness to assist on the ground when the need arises
• Able to perform 12hr rotating shift
• Experience in evaporator & process plant supervisory role will be advantageous

Reporting to the Engineering Manager, you are responsible for supporting and executing the setup of the Packaging operations. This involves working closely together with the Capital Project team to ensure Safety, Quality, Compliance and Operational aspects of the packaging lines are adequately included during the design and construction phase. Post construction and qualification, as the team prepares for commercial supply, you will support the engineering and maintenance activities to ensure they meet GMP, regulatory and supply requirements.

In this role, you will:

• Participate actively as part of the Site start-up team in equipment FATs and site qualification activities (IQ, OQ and PPQ) for Syringe and Vial Packaging lines.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using MPS.
• Build future-ready manufacturing facility and position Singapore as strategic site for new products and innovation solutions in the Global Network.

Key Responsibilities:

Safety & compliance

• Uphold and comply with safety standards and never compromise on patient, team and personal safety.
• Participate in Safety, Health, and Environment (SHE) improvement initiatives.
• Implement corrective and preventive actions as recommended from investigations, regulatory inspections and internal audits.
• Understand and ensure Safety and cGMP requirements are met. Ensure equipment related activity is completed according to established procedures and all associated documentation is completed to a high standard.
• Participate in Emergency Response Team (ERT) as a team member when assigned.

Enhance and uphold Maintenance quality

• Execute maintenance and improvement activities within the IPT, ensure preventative maintenance is completed according to schedule requirements, and support equipment change control implementations.
• Reduce equipment downtime and enhance equipment performance through quality preventive maintenance works.
• Executes CMMS Work Instruction from Packaging line (e.g. Isolation and Reconnection of electrical supply, replace faulty part, troubleshoot, repair E/I and mechanical faults).

Operations excellence

• Support and meet performance metrics of the assigned operations.
• Proactively assess and carry out preventive maintenance and corrective repair works on packaging, robotic and conveying system.
• Contribute to maintain a high level of good housekeeping and carrying out operations within accepted GMP and HSE practices.
• Resolve issues in a timely manner and minimize equipment down time.
• Participate in Continuous improvement initiatives. Identify and report improvement for routine work activities.
• Highly effective worker; resourceful with a “get-it-done, can-do” attitude.

Problem solving

• Analyze and recommend solutions for identified issues.
• Support Production and Maintenance teams on problem solving and troubleshooting.
• Able to properly assess the situation and understand when to escalate to a higher level.
• Work together with the Engineering team to use 5S tool to maintain the working environment and perform Kaizen for improvement activities.

What are we looking for?

Qualifications & Experience

• Nitec/ Diploma in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 3-5 years of maintenance experience in the chemical or semiconductor industry.
• Experience or knowledge of PLC’s/HMI’s, electrical protective devices will be an added advantage.
• Good oral/written communication and interpersonal skills.
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Basic knowledge in using Microsoft Office, including MS Word, MS Excel, MS PowerPoint

Professional Competencies

• Resilient and resourceful
• Continuous learning mindset
• Foster teamwork and cross collaboration
• Strong work ethics
• Result driven mindset

Job Requirements

• Physically fit as the job requires employee to stand, walk, crouch, lift, twist, climb and reach.
• In addition, employee may be required to stand for a period of time, climb flights of stairs, and wear hearing protection equipment as required by the job.
• May be required to be on standby for any emergency repair after office hours, weekends and public holidays.

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only.
• PMETs/Mid-Careerist with minimum 2 years working experience.
• Open to two years contract.

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path.
• A state-of-the-art facility that delivers solution to its customers world-wide.
• Highly engaging team that aims to innovate the future.

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

Responsibilities:

1. Involve in manufactory processes

• Supervise process flow control
• Supervise machine/equipment setting control
• Quality Control in between processes
• Monitor issues and matters on manpower

2. Provide positive suggestions on improvement on process

3. Suggest machines/equipment alteration for better control and preventive maintenance programme

4. Ensure strict GMP control and guidelines

5. Any other assignment by Management

Requirement:

· Diploma in Pharmaceutical Technology

Job Description:

To perform preventive and corrective maintenance works on equipment to ensure equipment can function/operate properly and safely.

Responsibilities :

1 Carry out preventive maintenance works in accordance to the schedule.

2 Carry out corrective maintenance works as when required.

3 Observe safety work procedures.

4 Ensure that tools provided are properly kept and used.

5 Observe proper behavior while working.

6 Perform standby works when required.

7 Follow-up on breakdown report and assist Standby Section where required.

8 Report to the superior on all matters relating to the section.

9 Carry out any other duties as assigned by superior.

10 To keep proper records of works carried out in the relevant reports.

11 Attend to the building or equipment inspection as required, by law (BCA, FSB).

12 Assist in conducting and investigation of damages/ accidents to equipment or personnel.

13 Follow-up on QA defects.

14 Ensure compliance to Environmental Policy, reduction of waste and prevention of pollution.

15 Perform maintenance work under supervision.

Our Production Technicians operate our chemical processes and perform production related activities, utilizing their chemical manufacturing knowledge and experience to operate and troubleshoot the plant in a safe and efficient manner. The Production Technician works in a team environment where collaboration and teamwork are critical to meeting the goals of the business.

Production Technicians are required to work shift work including nights, weekends, and holidays.

Job Responsibilities include but are not limited to:
- Safely and efficiently operates their assigned processes to meet the day-to-day quality, production and productivity goals of ALAM.
- Effectively prioritizes their daily tasks working with the Production Leads and Production Supervisors.
- Participate in monthly safety meetings and promote a safe work environment
- Actively participate on ALAM’s emergency response (ER) team and ER entry team
- Reviews and updates the Standard Operating Procedures
- Reviews and updates the Learning Resources for the processes
- Completes annual personal goals to achieve the plant goals and their own personal development goals
- Assembles and disassembles production equipment
- Performs basic maintenance on equipment
- Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
- Successfully complete all assigned training
- Cross-trains peers on approved functions
- Ability to roll cylinders- Rolling cylinders requires an individual to tilt a cylinder slightly with one hand, and use the other hand to move the cylinder forward by rolling it
- Fitness for duty, including but not limited to: ability to lift 50 pounds and have the ability to climb ladders
- Actively participate on ALAM’s emergency response (ER) team including as an ER entry team member, which requires wearing a tight fitting full-face respirator

Responsibilities:

• To have a role in VSAT product development team that participates in designing of LNA and Power Amplifier.
• Operating up to Ka band frequencies, the Up/Down Converter facilitates communication as part of its functionality.

Requirements:

• Bachelor’s Degree in Electronics Communication Engineering or equivalents.
• Minimum 3 years of experience in any RF systems.
• Experience in RF circuit design (LNA, PA, Up/Down Converter, Synthesizer).
• Experience in using simulation software.
• Experience in VSAT system or subsystem design.

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Be part of something altogether life-changing!

Find what drives you on a team with a more than 70-year history of discovery, determination, and innovation. As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers protect people. Our products serve a wide range of markets, so if your interests lie along the spectrum of Life Sciences to Industrial, you’ll find a rewarding role here. For the exponentially curious, Pall is a place you can thrive and amplify your impact on the world.

Pall is proud to work alongside a community of nine fellow Danaher Life Sciences companies. Together, we’re pioneering the future of science and medicine, developing products that enable researchers in the fight to save lives.

Learn about the Danaher Business System which makes everything possible.

The position is part of the Pall Singapore Operations team and will be located in Benoi, Singapore.

In this role, you will have the opportunity to:

• In the project phase to assist in installation, hook-up, start-up, qualification for all facilities equipment.
• To work closely with engineers and external vendors to resolve technical problems.
• To support daily facilities maintenance, troubleshooting, preventive, corrective maintenance, spare parts management and establishing equipment maintenance documents.

The essential requirements of the job include:

• Tertiary education in Mechanical, Mechatronics, Electrical & Electronics Engineering, or NITEC holders with > 5 years of experience.
• Must possess basic computer skills (MS Office)
• Analytical, systematic in problem solving approach, independent and a good team player.
• Experience in maintaining CDA, Chiller system, Chemical Supply System, UPW/DIW, wastewater treatment plant, ACMV, fire protection system, AHU/MAU & cleanroom.

It would be a plus if you also possess previous experience in:

• Working experience in Cleanroom environment will be an advantage.
• Working experience in Chemical environment will be an advantage.

Duration: 1 year, potentially extendable

The job descriptions are as follows:

• Experience in setting up and configuration of communication and network system eg. Muxes, Radios, Public Address System, PABX, network switches and routers.

• Analyse, isolate and resolve system integration issues.

• Liaise with vendors for procurement of equipment.

• Assist in testing of system to ensure seamless deployment.

• Generate System and Installation Control Document.

• Plan, generate test cases and procedures to carry out acceptance tests.

Working Hours: 8.30am – 6pm

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirement and execute task given by team leader.
• Attend to ad hoc job required for train, bus and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair, and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirements and execute tasks given by team leader.
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized.
• Self-disciplined to carry out tasks responsibly.
• Work cooperatively in a team with other technicians to complete assigned tasks.
• Have a positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis
• Perform installation, maintenance, repair, and replacement of all electrical jobs
• To execute work plan and ensure job compliance to quality standards
• Ensure compliance with safety regulations
• Able to understand job requirements and execute tasks given by team leader
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized
• Self-disciplined to carry out tasks responsibly
• Work cooperatively in a team with other technicians to complete assigned tasks
• Have a positive and pleasant attitude.

Job Description & Requirements

ZRG Adventures and Consulting is a specialist attractions consultancy company based in Singapore and we service a wide range of clients who are owners of world class attractions in Singapore and the region. We are looking for resourceful and service oriented individuals to join our growing team. If you enjoy working in an independent and fast paced environment with a keen eye for detail, we have an exciting role for you.

The Go Kart Maintenance Technician will be responsible for the maintenance, repairs, and upkeep of concession Go-Karts under the direction of the Operations Manager and Ride Manager. He / She is required to have a good understanding of electrical components and mechanical systems of a concession Go Kart and be hands on in ensuring that the highest serviceability levels are achieved.

Primary Responsibilities:

• Performing daily safety, mechanical, electrical, and quality assurance checks on the multiple concession Go Karts of the attraction to the highest standards of safety and according to the local and international standards.
• Performing daily safety checks of the track and conducting repairs to safety critical equipment / infrastructure as required to maintain track serviceability.
• Troubleshooting on-the-spot problems and repair requirements as per the manufacturer’s recommendations.
• Assisting with overall attraction maintenance, rebuilds, or enhancement works as required.
• Inspecting and performing minor repairs of all attraction equipment, safety gear, and track elements.
• Have excellent communication skills, able to work unassisted, and have excellent problem-solving abilities to meet customer needs.
• Full training will be given in all areas of the role.
• Assisting the Operations Manager / Ride Manager with the attraction operations.

Desired Qualifications:

• Applicants must be mechanically inclined with the proven ability to troubleshoot mechanical problems and have experience utilising basic hand tools and special repair equipment in the workplace.
• Previous experience with mechanics such as hydraulic disc brakes, precision measuring tools, and electrical equipment components will be an advantage.
• Previous mechanical or repair experience with DC electronics, Go Karts, or similar equipment (buggy, go-karts, car repairs, powered bikes, off-road vehicles, etc.) is a definite asset for the role.
• The ability to work independently as well as take direction from the Operations Manager / Ride Manager.
• Problem-solving skills, with great attention to safety procedures and protocols.
• Excellent communication and interpersonal skills and the ability to work independently and as part of a team.
• Must be able to work with a variety of environmental factors, including heat, noise, and flashing lights, and must be able to lift up to 30 kgs.

Terms of Employment:

• This is a full-time position that requires flexible availability for days, evenings, weekends, and holidays on a varied and rotational schedule.

Job Description:*

We are seeking a highly skilled and experienced LSA/FFA (Life-Saving Appliances/Fire-Fighting Appliances) Technician to join our team. The ideal candidate will have a minimum of 4 years of hands-on experience in the installation, troubleshooting, and annual maintenance of liferafts, lifeboats, and fire-fighting equipment. A strong understanding of class regulations and SOLAS (Safety of Life at Sea) requirements is essential for success in this role.

*Responsibilities:*

Install, inspect, maintain, and repair various life-saving appliances (LSA) and fire-fighting appliances (FFA) aboard vessels, ensuring compliance with class regulations and SOLAS requirements.

Conduct routine inspections and testing of liferafts, lifeboats, fire extinguishers, fire hoses, and other firefighting equipment according to manufacturer guidelines and regulatory standards.

Perform troubleshooting and diagnosis of equipment malfunctions, identifying and resolving technical issues promptly and effectively.

Conduct annual maintenance and certification of LSA/FFA equipment, adhering to industry best practices and safety protocols.

Keep accurate records of maintenance activities, inspections, and repairs, maintaining detailed documentation for regulatory compliance purposes.

Collaborate with ship crews, marine engineers, and other stakeholders to ensure the safe and reliable operation of life-saving and fire-fighting systems onboard vessels.

Stay updated on the latest industry developments, regulations, and technologies related to LSA/FFA equipment, participating in training programs and workshops as necessary.

*Qualifications:*

Minimum of 4 years of experience as an LSA/FFA Technician or similar role in the maritime industry.

Proficient understanding of class regulations, SOLAS requirements, and other relevant maritime standards.

Strong technical skills with hands-on experience in the installation, maintenance, and repair of liferafts, lifeboats, fire extinguishers, and related equipment.

Excellent troubleshooting abilities, with the capacity to diagnose and resolve equipment malfunctions efficiently.

Detail-oriented with a focus on accuracy and compliance with safety standards and procedures.

Effective communication skills, with the ability to collaborate with diverse teams and communicate technical information clearly and concisely.

Flexibility to work in challenging maritime environments and willingness to travel as needed.

Relevant certifications or training in LSA/FFA maintenance and inspection preferred.

Join our team and play a vital role in ensuring the safety and security of maritime operations by maintaining high-quality life-saving and fire-fighting equipment onboard vessels. If you meet the qualifications and are ready to contribute your expertise to our dynamic team, we encourage you to apply.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 1-2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The Process Technician is responsible for the daily operation of the equipment and procedures for the Plant area to which he/she has been assigned. This includes responsibility for manipulation of equipment and controls to carry out procedures, and completion of in-process analytical for process decisions and verification, and housekeeping of the work area. In completion of his/her job tasks, the Process Technician is responsible for seven basic performance areas – Yield, Capacity, Safety/Health/and Environmental, Quality, Plant Condition, Skill Development and Other Costs.

Education:

- NITEC/Diploma in chemical technology or closely related field

Responsibilities:

• Assist in the recruitment process by posting job openings, reviewing resumes, scheduling interviews
• Application of trainings with various centre
• Manage work passes application, renewal and cancellation
• Manage leave management system
• Support HR operation as and when required

Requirements

• N Level with min. 2-3 years’ experience in HR
• Detail oriented and meticulous
• Able to work independently with minimum supervision
• Work location in Tuas
• Transport provided at Boon Lay MRT
• 5 days work week
• Strictly for Singapore/ PR
• Able start work immediately

Responsibilities

• Prepare polymer additives for production usage.
• Carry out lab evaluation of finished products using testing equipment.
• Quality checks on finished products as well as production samples.
• Ensure proper documentations of results, equipment and consumables.
• Ensure proper sample management according to SOPs.
• Prepare test reports/Certificate of Analysis.
• Carry out safety and housekeeping activities in the department.
• Any other duties as and when required to be done by Quality Manager.

Requirements

• Possess at least ITE/Diploma in Chemical Process Technology, Chemistry Chemical Engineering, Science & Technology, Polymer Science or equivalent.
• Fresh graduates are welcomed. Preferably 1 to 2 years of relevant experience in lab testing/chemical/ petrochemical industry.
• On-the-job training will be provided.
• Keen to learn and responsible.
• Good interpersonal and communication skills.
• Team player.
• Meticulous with an eye for accuracy.
• Proficient in MS Office.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Job Responsibilities:

• Be responsible for the company's network, service equipment, the daily operation of desktop and management of the company's IT operation
• Provide on-site service support and handle the installation and maintenance of client's computer desktop, hardware and network equipment
• Be responsible for debugging and troubleshooting the video conference system
• The installation, debugging, configuration and maintenance of the desktop equipment (e.g. desktop, notebook, printer, printer, video conference, telephone, etc.)
• Communication with users to ensure the normal operation of the system
• Normal maintenance of network and computer room management (configured switches and firewalls basically)
• Management of the company's IT assets
• Other IT works assigned by the department manager and work report

Job Requirements:

• College degree and above, major in computer and other related fields
• Familiar with the basic network technology, the working principle of TCP/IP protocol, proficient in the configuration of brand network equipment such as Feita and Cisco, and experienced in the operation and maintenance management of computer room is preferred
• Familiar with mainstream systems such as Windows and Mac operating systems, common conference systems and equipments such as Polycom/Cisco/Teams. Experienced in deploying and debugging systems related to AD domain is preferred
• Good communication skills, initiative in work, strong learning ability, teamwork spirit, ability to work under pressure, strong sense of responsibility and service
• More than three years of relevant IT helpdesk experience. Experienced in system research and development with logical thinking is preferred
• Handle common computer hardware and software failures independently
• Accept the occasional business trip and hardworking
• Proficient in both English and Mandarin

Description

• $2600 - $3200
• 5.5 Days work
• 8am to 5pm, 8am to 12pm
• AWS + VB
• Shipbuilding Industry

Responsibilities:

• Perform inspections, troubleshooting, and maintenance on a variety of marine equipment
• Diagnose and repair mechanical, electrical, and electronic issues
• Maintain detailed records and documentation
• Installs and repairs wiring, fixtures, and equipment for all electrical services aboard ship and in shipyard facilities

Requirements:

• Diploma in Electrical or similar
• At least 1 year working experience in electrical repairs and maintenance
• Candidate possess LEW certificate with EMA or hold a valid Licensed Electrical Worker (LEW) certification is an added advantage

Interested applicants, kindly send your updated resume to +65 8288 5668 or Email to "[email protected]"

We regret that only shortlisted candidates will be notified.

EA Reg. No: R1880058 | Dylan

EA License No: 15C7752