Job Description

• Perform regular / periodic maintenance for the diving hats, equipment & system.
• Monitor the expiry certs for the gauges, filters & parts.
• Perform function testing for diving systems before deployment to site.
• Inspect, repair and replace mechanical parts for the air compressors.
• Work with high pressure air cylinders and bailout bottles for maintenance / pressure testing.
• Liaise with 3rd party contractors for maintenance works and progress.

Job Requirements

• Familiar with pneumatic and hydraulic systems will be an advantage.
• Those with Class 3 driving license will be an advantage.
• Successful candidates will be sent for Dive Tech Course and all the required training.

About the role

We are seeking someone to join our team as an Assistant System Analyst, you will play a crucial role in supporting the Information System department, providing supports in systems analysis to help drive the company's strategic initiatives. Be part of our dynamic and forward-thinking team!

What you'll be doing

1. Analyze problems, provide solutions to IT issues, and use troubleshooting skills to diagnose and resolve technical issues.
2. Perform routine updates and system checks to ensure optimal performance.
3. Document the workflows into manuals and maintain detailed system and its processes.
4. Maintain an inventory of all IT assets and equipment.
5. Continuously monitor, maintain and repair the organization's network, such as switches, routers, cabling, etc.
6. Participate in the design, development, and implementation of new systems and its applications.
7. Install and configure computer systems and applications within the company.
8. Provide help desk support and training to end-users as needed.
9. Updates and publish newsletters or information onto SharePoint Intranet.
10. Collaborate with cross-functional teams to understand existing processes and identify opportunities for improvement.

What we're looking for

• Bachelor’s degree in computer science, information systems, or a related field
• Minimum 2 years’ experience in similar role providing IT supports.
• Knowledge of internet security and data privacy principles is a plus.
• Technical understanding of IT hardware, software and networking
• Certifications such as CompTIA A+, Microsoft Certified: IT Support Specialist, or other relevant certifications can be advantageous.
• Strong analytical and problem-solving skills with the ability to translate business requirements into technical solutions.
• Ability to work independently and as part of a team.
• Excellent communication and interpersonal skills to effectively collaborate with stakeholders at all levels.

What we offer
At Epson (SEP), we are committed to providing our employees with a supportive and rewarding work environment. In addition to a competitive salary, we offer a range of benefits, including:

• Company transport provided at designated pick-up points islandwide
• Medical insurance coverage
• In-house canteen at subsidized price
• Employee Flexible benefits Scheme
• Career development opportunities, including training programs

Working Hours: 7.50am to 4.55pm (Mondays - Fridays)

Purpose: Responsible for the complete end-to-end planning, direction, and coordination of all the manufacturing processes related to system integration for a specific project. Together with the program team, the Manufacturing Engineer is to ensure that assembly can meet costs, quality, and delivery requirements.

Key Area of Responsibilities:

• Design of production layout to enable production to fulfill build plan forecast or pre-defined production run rate.
• Define requirements for assembly tools and equipment to support product realization and build plan.
• Participate actively in PQP to ensure that risks are identified, and preventive actions defined and implemented.
• Implement a certification program for assembly to ensure that assembly module leads are trained and certified to carry out specific assembly tasks.
• Collaborate with the Process Engineer in the design of the assembly Kit Kart for issue of materials into the clean room and effective handling of materials inside the production area.
• Lead in resolving technical problems faced by Assembly, and resolve internal and customer quality complaints.
• Monitor assembly capacity of the program, and perform ramp assessment when required, to fulfill build plan system delivery.
• Contribute to the system build progress meetings together with the program team to meet on-time delivery targets.
• Evaluate assembly efficiency and implement improvements to achieve the calculated standard time.
• Monitor all customer's consigned equipment to ensure all are inventoried, calibrated, and maintained regularly.
• Identify and implement improvements to shorten production cycle time, improve overall production efficiency, improve quality performance, enhance safety or to boost sustainability.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering)
• At least 3 year of experience as an engineer in the manufacturing assembly environment.
• Strategic, creative, and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Responsibilities:

· Plan, coordinate and oversee the installation and maintenance of internal systems of hardware, software and networks.

· Implement and manage security protocols, including access controls, backups and firewalls.

· Monitor, troubleshoot IT systems, including security system and networking.

· Manage servers, email systems, CCTV, HR system and others.

· Set up user accounts and PC workstations, Apps etc.

· Ensure the efficiency and reliability of IT infrastructure.

· Support web development and maintain Company portals.

· Maintain and support the Dynamics NAV ERP system.

· Conduct programming and develop Apps to support business operation.

· Provide IT support to internal and external users as needed.

· Maintain all IT related documentation and policies up to date.

· Perform other tasks as required.

Requirements:

· Minimum Diploma in IT, Computer Engineering, or a related field.

· At least 2 to 3 years of programming experience.

· Knowledge of system security, networking and database management.

· Good programming skills, with app development experience is a plus.

· Familiarity with access control, CCTV, and alarm systems is an advantage.

· Highly adaptable with a fast-learning ability.

· Open to young professionals and fresh graduates, eager to learn and grow.

Working Hours: 8am to 5.30pm (Monday to Friday)

Work Location: 5 Jalan Tepong

(Transportation is provided, pick-up at Lakeside MRT station)

Job Responsibilities:

• Establishes networking environment by designing system configuration, directing system installation, defining, documenting, and enforcing system standards
• Maximizes network performance and optimization by monitoring performance, troubleshooting network problems and scheduling upgrades when necessary
• Oversee maintenance of all IT system in line with IT security policy
• Secures network system by establishing and enforcing policies, defining and monitoring access
• Ensure project tasks are completed on time and project goals are achieved

Relevant experience:

• 1-2 years of experience in network engineering, administration, or related roles

Basic skills required:

• Diploma / Bachelor degree in IT related field
• Strong understanding of network protocols (Eg: TCP/IP, DNS, DHCP, BGP, OSPF)
• Knowledge on LAN/WAN networking, network design, problem solving, network hardware configuration and project management
• Familiarity with cloud networking (AWS, Azure, Google Cloud) is a plus
• Knowledge of network security best practices and tools
• Excellent problem-solving and analytical skills
• Responsible, resourceful, customer oriented and an independent player

Purpose: To manage and provide technical support of IT systems and networks, to ensure uninterrupted and secured business operation, and compliance with VDL/ETG standards and roadmap.

Key Area of Responsibilities:

• Maintain and update all information technology (IT) systems, devices and peripherals, within the company to ensure stable and reliable performance.
• Maintain and update the company’s network infrastructure and adhere to the parameters & static address tables according to the One-ETG standard.
• Trouble-shoot and resolve all IT-related technical issues and prevent re-occurrences.
• Ensure security and proper access control of all IT systems, networks and data, so that they are free from malware, spyware, hacking, illegal software and unauthorized access.
• Create regular backups of all relevant company data and store it safely, to ensure Business Continuity, in case of systems and/or network outage.
• Research and benchmark new developments in the IT industry, and propose improvements to business processes to save costs and drive for better efficiency and productivity.
• Source, communicate and manage external parties or service providers that provide service support and maintenance to operational IT matters.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Computer Science/Electrical and Electronic Engineering or other relevant field.
• Minimum 3 years of working as a system support engineer in the semiconductor industry or other similar roles.
• Proficient in Microsoft Excel functions
• Good communication skills

What a System Interaction Engineer does in HP:

• Partner with the R&D, NPI and Manufacturing teams for both Supplies and Printer organizations to deliver on program deliverables.
• Define and design System Interaction testing to evaluate product performance and programs intent of meeting or exceeding customer experience.
• Collaborate with Supplies Quality team to analyze defects, understand root cause and define solutions to improve product quality.
• Automate and digitize current Test Flow for better efficiency and effectiveness.

Individuals who will do well in this role usually possess:

• Bachelor's or master’s degree in Mechanical Engineering, Manufacturing Engineering, Electronic and Electrical Engineering, or equivalent.
• Typically, 1-3 years’ experience.
• Software development, python coding and RPA experience.
• Strong technical engineering leadership and capabilities

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Purpose: Strategic planning and develop cost effective & low risk manufacturing/assembly process steps/planning from raw material to completion including special processes through Product Quality Plan(PQP).

Key Area of Responsibilities:

• Transfer of Project, Technology, System from customer to VDL for New product development.
• Feasibility study for New Assembly.
• Identify the facilities/supplies required for the assembly.
• Define and establish Project Plan for Assembly to meet on time delivery.
• Resolve technical issues in assembly to ensure smooth production.
• Manage technical changes to fulfill customer requirement.
• Implement improvements to processes for cost effectiveness.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical or Precision Engineering or other relevant discipline.
• Minimum 3 years of experience as a process engineer in the Contract Manufacturing industry or equivalent.
• Mechanical and electrical workmanship
• Experience in working in cleanroom will be an advantage
• Good problem-solving skills
• Proficient in Microsoft Excel functions
• Good communication skills

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

Position Title: Technician

Responsibilities

• Perform electrical and mechanical troubleshooting and repairs on automated equipment
• Assist in the troubleshooting of the Automated Storage and Retrieval System (ASRS) equipment and control systems
• Assist in repair works of plant, equipment, and facilities
• Perform lighting replacement and tracking
• Ensure the completion of preventive maintenance as per the schedule assigned by the Manager
• Conduct routine inspections and servicing of the company’s mechanical and electrical installations, building and associated facilities, air-conditioning units plumbing and sanitary systems, machinery, and equipment
• Conduct inspections, checks and minor repair work that are building related such as floor demarcation, patching and partition works
• Attend to user complaints and carry out minor repairs
• Attend to external contractors during major repairs and installation work as well as provide assistance as required
• Ensure work done by external contractors are completed as per requirements and in a timely manner
• Assist in all building contractual works such as pest control, lift servicing, landscaping etc
• Assist external contractors in the preventive maintenance of all facilities such as cooling tower, air compressor, fire alarm system
• Ensure work done by external contractors are completed as per requirements and in a timely manner

Requirements

• Minimum 3 years of experience in Engineering and Facilities management
• ITE Higher Nitec/Nitec in Mechanical Engineering or Electrical Engineering is preferred
• Strong problem-solving skills, attention to detail, and the ability to work independently
• Basic computer literacy
• Good communication skills to liaise with internal parties and external vendors

Markono is committed to fostering and cultivating a diverse and inclusive workplace. We believe that a diverse workforce is needed to drive innovation, grow, and succeed in today’s corporate climate. We recruit and select employees on the basis of merit (such as skills, experience or ability to perform the job), regardless of nationality, age, gender, marital status, pregnancy status, caregiving responsibilities, race, religion, language, disability and mental health conditions. Join us and thrive!

Technician Responsibilities:

• Diagnose, troubleshoot and repair mobile devices;

• Quality control and testing of repaired devices to ensure full functionality. Resolve/manage customer inquiries;

• Able to interact positively with customers at the storefront and over the phone;

• Ability to multi-task between repairs and customer service;

• Other related duties as required;

• Maintain and use repair tools and equipment. Including software and in-store POS system to track repair tickets and inventory;

• Strategically plan the order of operations to ensure a successful repair;

• Provide estimates and quotes;

• Glass only replacement on Samsung and iPads;

• Microscopic Board work; component replacement Hand-solder SMT components,

• remove and replace thru-hole comp without board damage,

• solder wires and cables,

• Diagnosis, troubleshoot and repair mobile devices;

• identify assembly and documents issues;

• Repair logic board issues from water damage.

Requirements:

• Excellent knowledge of customer service best practice with previous experience;

• Ability to repair a variety of mobile devices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone, and iPads.);

• Ability to communicate effectively with a wide variety of people in a professional manner, face to face, on the telephone and in writing;

• Knowledge of mobile devices including manufacturers, operating systems, and network service providers;

• Willing to work flexibly and with enthusiasm;

• Excellent organizational skills;

• Good attention to detail and ability to show initiative;

• Ability to demonstrate practical troubleshooting and problem analysis techniques;

• Ability to plan and prioritize your workload without supervision

Responsibilities:

· Repair and servicing of tools / equipment

· Delivery and collection of company products

· Field service work / Inspection

Requirements:

· Preferable with a driving license

· Candidate must possess at least “N" Level or ITE

· Preferred bilingual in English

- Preferred with mechanical background

· Relevant training will be provided

Technician Responsibilities:

• Diagnose, troubleshoot and repair mobile devices;

• Quality control and testing of repaired devices to ensure full functionality. Resolve/manage customer inquiries;

• Able to interact positively with customers at the storefront and over the phone;

• Ability to multi-task between repairs and customer service;

• Other related duties as required;

• Maintain and use repair tools and equipment. Including software and in-store POS system to track repair tickets and inventory;

• Strategically plan the order of operations to ensure a successful repair;

• Provide estimates and quotes;

• Glass only replacement on Samsung and iPads;

• Microscopic Board work; component replacement Hand-solder SMT components,

• remove and replace thru-hole comp without board damage,

• solder wires and cables,

• Diagnosis, troubleshoot and repair mobile devices;

• identify assembly and documents issues;

• Repair logic board issues from water damage.

Requirements:

• Excellent knowledge of customer service best practice with previous experience;

• Ability to repair a variety of mobile devices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone, and iPads.);

• Ability to communicate effectively with a wide variety of people in a professional manner, face to face, on the telephone and in writing;

• Knowledge of mobile devices including manufacturers, operating systems, and network service providers;

• Willing to work flexibly and with enthusiasm;

• Excellent organizational skills;

• Good attention to detail and ability to show initiative;

• Ability to demonstrate practical troubleshooting and problem analysis techniques;

• Ability to plan and prioritize your workload without supervision

Job Description:

To perform preventive and corrective maintenance works on equipment to ensure equipment can function/operate properly and operate safely.

Requirements:

1. Carry out preventive maintenance works in accordance to the schedule.

2. Carry out corrective maintenance works as when required.

3. Observe safety work procedures.

4. Ensure that tools provided are properly kept and used.

5. Observe proper behavior while working.

6. Perform standby works when required.

7. Follow-up on breakdown report and assist Standby Section where required.

8. Report to the superior on all matters relating to the section.

9. Carry out any other duties as assigned by superior.

10. To keep proper records of works carried out in the relevant reports.

11. Attend to the building or equipment inspection as required, by law (BCA, FSB).

12. Assist in conducting and investigation of damages/ accidents to equipment or personnel.

13. Follow-up on QA defects.

14. Ensure compliance to Environmental Policy, reduction of waste and prevention of pollution.

15. Perform maintenance work under supervision.

Mission/purpose of the Job:

• Responsible for vehicle repair, diagnostic, service maintenance.
• Ensure all assigned jobs are carried out according to UD/Volvo Quality Standards.

Key responsibilities/Accountabilities:

• To perform all basic troubleshooting and basic diagnostics with appropriate recommendations (With guidance from Team Leaders where appropriate)
• To check and provide correct recommended Parts details in the Work Order as and when required.
• To carry out Service Maintenance on the trucks including:

- Power Steering Diagnostics and Repair

- Engine Overhaul

- ESCOT Control Housing Overhaul

- ESCOT Gearbox Overhaul

- Rear Axle Overhaul

- Advanced Multimeter Measurements and Wiring Repair

- Emission Related System

- Fault tracing and repair electrical system via Tech Tool test, Calibrate and programming

• To perform all repairs (Mechanical, Electrical, Electronic etc)
• To ensure Utilization, Efficiency and Productivity is achieved.
• To record repair time and detail of repair in the Work Order.
• To keep Team Leader updated on the repair details and repair requirements.
• Adhere to Warranty Process and Procedures (Warranty tagging of parts, return and storage of warranty parts etc).
• Ensure good housekeeping of work bay.
• Accountable for all tools and equipment handling and usage.
• Ethical compliance of genuine parts replacement and service rendered according to the checklist and scope of works.
• Ensure all service and repairs are performed thoroughly and in accordance to good quality practice and procedures adhering to manufacturers standard 4 (Singapore).
• Lead by example to ensure high level of Health & Safety performance within the area of responsibility.
• Attend upgrading courses as and when available.
• To attend to breakdown where necessary and to be equipped with a valid Class 3/4 driving license.
• Adhere to UD/Volvo processes and policies.
• Any other duties assigned by your immediate superior.

Essential educational and/or training qualifications and certificates

• NITEC in Automotive Technology or former NTC 3/2 in Motor Vehicle Mechanics or NTC 3/2 Heavy Duty Diesel Mechanics or Diploma in Automotive Engineering or related field.
• Preferred with valid Class 3 / 4 / 5 driving license (Singapore).

Preferred experience and knowledge

• Minimum of 4 – 6 years working experience in servicing and repairing heavy trucks (Japanese and Continental brands).
• Basic Vehicle Principles and Concepts.
• Advanced engine, transmission and brake system knowledge.
• Multi-meter basic electrical values.
• Knowledge in vehicle electrical circuit diagram.

Necessary technical/functional/language skills

• Basic Hydraulics
• Power Steering Diagnostics & Repair
• Brake System & Diagnostics
• Diesel Engine
• Electrical Wiring Repair
• Multimeter Advanced Measurements
• Engine Overhaul
• Emission Related System
• Preventive Maintenance
• Transmission check and adjustments
• Rear Axle Overhaul
• ESCOT Gearbox Overhaul, Control Housing Overhaul, Voith Retarder Overhaul
• Telematics
• Compressor cooling basic
• Computer skill
• Completed Curriculum and related Assessment for Technician Level III –Service & Basic Repair

• Engage in the installation, repair and maintenance of various technology-based equipment.
• Conduct regular checks and troubleshooting to ensure the technical equipment operates at its optimal performance.
• Provide on-site assistance with hardware and software use and address and resolve technical issues faced by clients or customers.
• Carry out diagnostic tests and analyses to identify the roots of technical issues.
• Liaise with team members and communicate with stakeholders in layman's terms to assess needs and system requirements.
• Record and document instances of hardware failure, repair, installation and removal.
• Stay up to date with technical developments and advancements in allied fields.

Requirements

• working hours : 7:30am - 5:15pm (5.5 days)
• Nitec in Mechanical/Mechatronics

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

• Conduct routine maintenance work (replacing fluids,lubricating parts etc.) aiming to vehicle functionality and longevity and repair work and report to workshop foreman for necessary technical assistance
• Inspect vehicle computer and electronic systems to repair, maintain and upgrade
• Inspect vehicle engine and mechanical/electrical components to diagnose issues accurately.
• Repair or replace broken or dysfunctional parts and fix issues (e.g. leaks)
• Has Experience in Automotive repairing, repair tyres,engine tune-ups, oil changes, gearbox repair, air-con & system diagnosis
• Any other ad-hoc duties as assigned

Jobs Requirements

• A minimum of 5 years’ experience in a similar role.
• Basic computer skills.
• Able to work independently and with a good working attitude
• Experienced/Responsible/Diligence.
• Strong team spirit.
• Able to work any shift
• Able to work on weekends and public holiday
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Summary:

The service technician provides efficient after-sales technical services and support, including assembly, PDI, delivery and commissioning, trouble-shooting, maintenance and servicing of equipment and its related parts.

Job Description:

• To attend to, with urgency, all service calls and is responsible to provide efficient and reliable scheduled maintenance for all equipment. To ensure equipment is tested upon completion before handing over to clients.
• To, at all times, represent the Company in the best possible way, and to relate to clients with professionalism and integrity.
• To assemble, deliver and commission equipment at customer sites, and to train users on its operation.
• To observe safety precautions and to execute correct engineering practices at all times so as to minimise risk to self and others as well as damage to equipment and workplace.
• To maintain proper housekeeping and discipline both within the office floor and workshop as well as the client's work site so as to improve operational efficiency, whilst maintaining the good image of the Company.
• To be responsible to comply with the Group and Company Environment, Health and safety (EHS) policies and safe work procedures.
• To carry out service contracts which our company has with customers.
• To prepare parts recommendation of repairs to admin team for customers
• To assist the manager in seminars, workshop and product demonstration on ad-hoc basis.
• To complete service order as per completed job.
• To assist in improving and building up the Service unit to achieve the Company's objective of being a leading service provider in terms of its reliability and professionalism.
• To pursue and achieve total quality and competitive advantage through high degree of self-discipline, commitment and involvement at all levels of the organization as well as with its clients, suppliers and principals.
• Any other duties as assigned by the company.

Experience & Qualification:

• NITEC or Diploma in Automotive Technology, Mechatronics or Mechanical Engineering.
• Overhead crane service and repair experience is preferred.
• With Class 3 license is preferred.
• Able to work independently with minimum supervision.
• Technical knowledge in automotive repairs.
• Team player with good discipline and work attitude.

Roles & Responsibilities

The aircon technician will be involved in the maintenance, repair, and installation of different types of air conditioning systems. Aircon Technician will be involved in performing general maintenance services in households and offices all across Singapore, including washing aircon, diagnosing and rectifying issues in all brands and types of aircon, and installing and dismantling aircon. This role has the following responsibilities:
- Dismantle malfunctioning systems and replace worn out or defective parts.
- Perform chemical washes and chemical overhauls.
- Perform repair and maintenance on malfunctioning air conditioners.
- Perform general maintenance services on normally-functioning air conditioners.
- Prepare service reports after every completed job.
- Keep a record of job schedules.
- Pick up and deliver required materials and supplies as and when required.
- Communicate with clients with regards to problems in equipment and post-job reports.
- Perform any ad-hoc tasks given by supervisor or management.
This role requires the following skills
- Possess a CLASS 3 DRIVING LICENSE.
- Must be a confident driver and have experience driving medium-large-sized vans.
- Minimum 5 years experience working as an air conditioner technician performing chemical wash, general servicing, repairs, and installation.
- Experience working in CENTRALISED AIRCON SYSTEM maintenance is a big advantage.
- Confident at carrying out repairs and cleaning on all common aircon brands for wall-mounted, ceiling, casement, ducted, and portable aircon in Singapore including Daikin, Panasonic, Samsung, Mitsubishi Electric, Heavy Industries, Fujitsu, Toshiba, Carrier, and Europace.
- Able to speak and write basic English (excellent English is a strong advantage)
- Knowledge of electrical wiring.
- Able to do some heavy lifting and climbing.

- Willing to work on weekend shift

Summary of Job Scope:

To work closely with Microbiologist, Production, QC personnel and QA department to ensure all apparatus and end products are safe and free from any contamination.

• Perform QC checking, sampling and routine analysis of in-coming raw material.

• Operation of High Performance Liquid Chromatography (HPLC) and laboratory analytical instrument.

• Perform sampling, routine checking and recording of packaging material and printed packaging material (Label, leaflet, unit box, tube).

• Carry out sampling and testing for daily purified water system monitoring.

• Maintain and record retained sample of raw material.

• Maintaining and recording the temperature and room humidity in equipment room.

• On line checking and recording of in-process granules and tablet

• Checking and recording of in-process syrup, cream.

• Checking and approval of packing process.

• Daily stock card update for working standard.

• Perform identification test for in-coming raw material.

• Routine analysis and recording of raw material, intermediates and finished product.

• Carry out stability testing.

• Carry out dissolution profile test and monitoring.

• Carry out Analytical method validation.

• Carry out calibration/ performance verification of laboratory equipment/ Apparatus.

• Quality Control check on raw material dispensing.

• Ensure coding of labels and bar code labels are complete & accurate.

• Preparation and recording of reagents and chemicals.

• Preform analysis and support for working standard preparation.

• Maintain tidiness and cleanliness of laboratory equipment and workplace.

• Practice Good Laboratory Practice (GLP) and laboratory safety.

• Maintain QC document in laboratory to ensure up to date and accurate.

• Update laboratory equipment log book / Quality Control (QC) record book and all other QC documents.

Requirements:

• Diploma/ Degree in Chemistry or related field
• Able to perform independently in a fast paced environment
• Able to perform multi-task as assigned by superior
• No prior experience required (Fresh grads are welcome to apply)
• Must be able commit to OT and Night Shift (when necessary)

Responsibilities:

• Executing electrical preventive maintenance to maintain and sustain the food production equipment, facilities and electrical system.
• Supporting Engineers in setting up of the new equipment & systems and transfer equipment for new projects.
• Troubleshooting, maintaining and repairing equipment and electrical / electronic systems.
• Preventing fire and ensuring safety of personnel and equipment and preventing any incidents and accidents from possible electrical hazards.
• Implementing projects to improve energy efficiency for all of systems.
• Maintaining proper records for works of repairs, maintenances and projects.
• Exhibiting good work discipline and housekeeping habits, and adhering to all safety regulation and house rules at all times.

Pre-requisites:

• Minimum NiTEC in Electrical Engineering or related fields.
• Experience in manufacturing environment with handling machine repair and troubleshooting inclusive of preventive maintenance.
• Salary will commensurate with qualifications and experience.

Purpose of the Position

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)
• To manage Linde Gas Singapore operations to ensure it is maintained safe, reliable, and efficient.
• The operations are to achieve key performance indicators (KPI’s) and annual plan objectives.

Responsiblities

• Accountable for compliance with safety, health, environmental, quality and relevant industry standards.
• Accountable for safe, efficient, and reliable operation of assets
• Accountable for investigating and trouble shooting process issues and outages
• Support process improvement, productivity and reliability projects
• Accountable for the planning, supervision, and execution of operation activities
• Accountable for compliance to all Procedures, Routines, Logs and other Operational Processes
• Accountable for meeting contractual and supply commitments
• Accountable for planning and executing TAR operational activities
• Accountable for controllable site costs
• Accountable for timely and accurate data reporting

Requirements

• ITE in Chemical Process technology /Diploma in Chemical Engineering or related discipline
• Min. 1 to 2 years Operational experience with demonstrable exposure to process plant operations and site-based activity or equivalent.