The Network Technician is responsible for installing, amending, and removing unnecessary cablings and other network peripherals.

The activities may include but not limited to:

• Install well-functioning computer networks, connections, and cabling.
• Perform troubleshooting to system failures and identify bottlenecks to ensure long term efficiency of network.
• Inspect LAN infrastructure and fix minor or major problems/bugs.
• Test and configure software and maintain and repair hardware and peripheral devices.
• Evaluate network performance and find ways of improvement

Make an Impact by

Technical Experience

• Experienced in Layer 1 Physical administration in enterprise DC and Port Environment.
• Responsibilities Analyzing, troubleshooting, and correcting network problems remotely/on-site
• Maintaining an inventory of network equipment along with their specifications
• Troubleshooting problems with computers, printers, network devices, or other network components to ensure optimal performance.
• Provide support for Level 1 escalated issues.
• Performing standard or project change request as per change window (non-business hours)
• Performs any other related duties as assigned by the team lead/manager.
• Driving within Port

Rack Condition

1. Rack Sighting
2. Rack Available
3. Rack Locked
4. Rack Fan Working
5. Rack Cleanliness
6. Power Cables Secured

Environmental Condition

1. Temperature (Check the location of the temperature and inform the authority or our engineer)
2. Other Environmental Factors (Dust, Dirt etc.), if Duty then need to clean the rack or space where device is located.
3. Physical Health of Device (Randomly need to check the device health).
4. AGV Preventive Maintenance.
5. Rack Mount and Dismount (Installation, Removal and Addition)

Labelling

1. Labelling Condition (verify labelling of device if not okay then need to relabel the device.

Skills for Success

• Must possess a valid Singapore class 3 driving license
• Diploma in Computer Science / IT or equivalent
• Minimum 1 year of experience in hands-on experience with common software and hardware installation and deployment

he Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

We are looking to provide a learning opportunity for individuals delivering timely, sustainable output for Technical Services Team. The trainee will work under supervision of the Technical Services - Utilities & HVAC Systems team, Understanding and collaborate with other functions of Technical Services team in the company to provide appropriate and timely output.

Key Responsibilities:

You will be required to:

• Perform daily operation and maintenance of Utility plant and utilities services.
• Provide reliable plant utilities services of heating, cooling, steam and air by involving in operation and maintenance activities on plant facilities and utility systems.
• Determine work priorities, scheduling repair / maintenance of equipment for plant facilities and utilities services.
• Implement and Improve preventive maintenance programs by reviewing operations, quality control and maintenance reports and statistics with operational standards / cGMP for plant facilities and utilities services.
• Contribute to continuous improvement by providing recommendation and initiative to promote sustainability.
• Actively seek improvements to systems and processes through continuous improvement, streamlining and simplification.
• Provide support to new changes to systems and commissioning activities.
• To be able to assess and manage spare parts for Utilities Systems.
• Involve in problem solving sessions to identify the root cause of system issues.
• Participate in qualification of gmp areas (cleanrooms).

You will be able to learn :

• Process Design Learning of Utilities Systems.
• HVAC - Heating Ventilation and Air Conditioning,
• Clean Utilities (Compressed Gases, Purified Water, Water for Injection & Pure Steam Systems) and
• Black Utilities Systems (Chillers, Boiler, Air Compressors, Neutralization package).
• Spare Part Management & Maintenance Work Order Portfolio in SAP.
• Continuous Improvement frame work.

Skills:

Business Skills and Competencies

• Educational background –Mechanical / Chemical Engineering (Diploma)
• Proficient in use of IT and software/systems, ideally document management and database systems

Behavioural Skills and Competencies

• Strong written and oral communication skills
• Flexible with self-reliance to work in an empowered environment
• Awareness and ability to work within culturally diverse teams
• Demonstrated ability to take initiative, think and work independently, and problem-solve
• Strong drive for performance and attention to details
• A keen interest to learn and a passion for knowledge enhancement

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Looking to gain valuable real world work experience and help positively impact the health of billions of people? Apply for a GSK Traineeship today!

This offers you the opportunity to kickstart your career – to take on a real role with genuine impact! You’ll take on challenging, serious work on live projects or assignments. You’ll also get to learn from us, develop your skills and gain valuable experience for wherever the future takes you.

What will you do?

• Receipt of materials/chemicals from central warehouse, store and issue to production on timely manner.
• Performing SAP transactions in alignment with physical movement of goods.
• Ensure adherence to GMP requirement such as sanitization of materials, cleaning of classified and non-classified area.
• Receive, handling and management of process waste.
• Timely review temperature graphs from temperature sensors (PEMS and AMS)
• Maintain inventory accuracy and proper documentation (cycle count).

What will you learn?

• cGMP requirement in Biopharma manufacturing environment.
• Zone classification and requirements (cleaning and gowning).
• Inventory management (Kanban and SAP).
• Coordination between requestor, warehouse, and material planner (if shortage of materials)
• Exposure to Biopharma production materials and handling manner (material sanitization method)

What are we looking for?

• Curious, willing to learn and adaptable to changes.
• A lively interest in biopharma industry.
• Good interpersonal skills
• Disciplined and work with integrity.

What do we offer you?

• Working hours: 0800 to 1700, Monday to Friday.
• Subsidized cafeteria service.
• Comprehensive network of company transport serving multiple MRT stations

Sevenseas Electronic is a marine electronics company established in Shanghai, China since 1996 and registered our local companies/stations located in Qingdao, XinGang ,Dalian, Yantai, ZhouShan , FuZhou & GuangZhou ports & Singapore with more than 40 owned, trained & experienced technicians to provide on time & cost-effective service in China and Singapore ports.

Our company is combined by three parts including Radio/Navigation, Automation & IT Solution.

We are looking for a dedicated Service Technician/ Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing of navigation and communications equipment on shipping vessels.

Responsibilities/Requisite :-

1. Attending ships in terminal, anchorage, shipyard for repair, installation, troubleshooting services.

2. Report and documentation as per company procedures (E.g. Update of Software, database, etc.).

3. Timely completion of technical and service work report

4. Conducting fault-finding process and resolve the technical issue onboard as appropriate.

5. Providing technical support both onsite and remotely for company product to the customer.

6. Providing support to coordinators.

7. Ensuring that the work is executed according to Company Quality, Health, Safety and Environmental guidelines and customer site procedures.

8. Ad-hoc duties as assigned by manager.

9. Able to travel overseas.

Requirements

• O-Level/ITE in Electronics Engineering
• Newly graduates are welcome

Alternatively, you may wish to email your resume in a detailed Word format to [email protected].

Machinery Mechanic/Technician

Job Description:

• Good job knowledge of marine heavy Equipment Mechanical works, troubleshoot, remove re-installation and repair works (Such as Cranes, motors, generators, and pumps etc.）
• Good job knowledge of Heavy Equipment Electrical work, troubleshoot and repair Equipment Electrical related matters.
• Attend Breakdown
• Provide technical assistance to service operations
• Other ad hoc duties assigned by supervisor/management

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Ensure safe and optimal operation of process units
• Ensure workplace safety by proper asset upkeep, supporting function testing on safeguarding system and proper control on work activities in the plant
• Participate in plant shutdown & start-up and process unit troubleshooting work activities

• Diploma or NITEC in Chemical Process Technology (Petrochemicals or Pharmaceuticals) OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE / Polytechnic engineering graduates are welcome to apply as training will be provided

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description:

• To record daily output data and submit to leader.
• Setting up machines during changeover of part.
• Trouble shoot production related quality issues.
• To attend daily morning briefing conduct by leader and provide status update.
• To communicate on the status on each machine before shift hand over.
• Ensure own responsible machines to be warm up before start of shift.
• To report any scrap or technical issue to leader faced during processing.
• To ensure respective in-charge machines are fully utilize.
• Inform leader if machine is faulty/down to avoid delay in delivery.

Prerequisites:

• Minimum ‘O’ Levels, Higher Nitec/Diploma in Engineering (Mechanical/Electrical/Electronics), or its equivalent.
• Minimum 2-3 years of working experience in production environment preferred.
• Experience in setup and operating single point diamond turning machine.
• Preferably some years of work experience in related or relevant work experience in optics manufacturing.
• Must be able to understand and communicate in English.
• Able to carry heavy items (segments or tooling).
• Willing to perform rotating shifts.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 - S$50,000)

Perform and ensure safe and efficient day-to-day operations of oil movement area so that movement and blending of products are in accordance with specification.

• Diploma or NITEC in any Engineering/Science discipline OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE/Polytechnic engineering graduates are welcome to apply as training will be provided

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency.
• Attend to ad hoc job at train and bus depots.
• Responsible for personal and safety of others accordance to workplace and health safety act.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Job Responsibilities:

• To perform mechanical fitting job, machine assembly and maintenance, which requires knowledge of machine fits and tolerances
• To lead a team of technicians in preventive maintenance, checking and inspection, troubleshooting, repairs and overhauls of machinery and equipment having assigned and allocated resources to meet targets through planned and scheduled annual maintenance activities
• To carry out metal working for hot works
• To execute welding work
• To operate heavy machinery and perform lifting works
• To read mechanical drawing

Job Requirements:

• Candidate must possess at least secondary school education/ NITEC
• Past experiences in heavy industry/ metal fabrication shops/ machine maintenance will be preferred
• Candidate should possess basic knowledge of computer and data entry, and basic command of English (ability to read, write and speak)
• Able to work rotation shift and weekends

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.
• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.
• Perform and maintain the documentation of operations in accordance with cGMP requirement.
• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.
• Perform online monitoring of in process parameters / checks throughout the batch.
• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.
• Perform all activities in accordance with cGMP.
• Maintain the cleanliness of work area to ensure cGMP compliance.
• Perform all other relevant duties required to meet the schedule.
• Check relevant material and product details against batch document
• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.
• Involve in equipment / process qualification.
• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.
• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.
• Experience in tablet coating of oral solid dosage manufacturing is preferred.
• A good team player with positive learning attitude.
• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology /Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines
• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.
• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Job Requirement

• Perform routine inspections, maintenance, and repairs on compressors and related equipment.
• Diagnose and troubleshoot mechanical and electrical issues with compressors.
• Replace or repair defective components and parts as needed.
• Ensure all work complies with safety regulations and company standards.
• Maintain accurate records of service and repair activities.
• Provide technical support and advice to clients regarding compressor operation and maintenance.
• Respond to service calls and emergencies promptly.

Qualifications

• Proven experience as a Service Technician
• Possess Class 3 Driving license
• Strong knowledge of compressor systems and components.
• Proficiency in troubleshooting and repairing mechanical and electrical issues.
• Familiarity with safety regulations and best practices.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Description:

• Responsible for carrying out field duties according to the Standard Operating Procedures (SOPs) and / or Operation Supervisor’s instructions.
• Perform unit start-up, shutdown and plant turnaround activities according to the Standard Operating Procedures (SOPs).
• Perform planned rounds (Field / DCS) and take corrective action to maintain equipment and plant operations within safe operating limits and product quality compliance.
• Monitor unit performance to ensure safe and optimal operation of the plant equipment, pipeline distribution network and other facilities.
• Prepare process equipment for maintenance service, this includes line purging, LOTO.
• Take part in operating procedures development and prepare job pack documentation for equipment repair.
• Perform troubleshooting, resolve field operational issues and provide support for engineering, operation and maintenance teams.
• Execute according to production schedules and achieve operation targets in a cost-effective manner.
• Perform any other tasks which may be assigned to him by Ops Supervisor or Ops Manager.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Minimum GCE ‘N’ Level certification with 3 – 5 years of relevant work experience.
• Candidates without any relevant experience will be considered as training will be provided.
• Experience in ISO-tanker unloading, incineration and water treatment operations will be added advantages.
• Candidate with a forklift licence is a plus point.
• Must be prepared to work rotating shifts, weekends and Public Holidays.
• An effective team player with good communication skills.

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

Lead Maintenance Engineer (HVAC & Purified Water Systems)

Our Engineers support internal and external manufacturing operations remain operational, continuously improve, and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

Lead Maintenance Engineer (HVAC and purified water system)

In this role, you will:

• Act as Subject Matter Expert (SME) in IPT Maintenance team with in-depth knowledge in Purified water system, HVAC, and Electrical & Instrumentation.
• You will take ownership for the HVAC and purified water system day to day support and continues improvement.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Lead Quality Risk assessment and develop a yearly trend for purified water system and HVAC system.
• Develop and implement maintenance program, preventive maintenance procedures and spare parts strategy for safe, reliable, and efficient operation of the systems/Equipment’s.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using our Production System.

Key Responsibilities:

Safety & compliance

• Lead or support investigation, participate in trouble shooting and root cause analysis for various operational events, and ensure that all relevant engineering CAPA are completed within agreed timeline.
• Provide support and actively participate in the site expansion project related to the HVAC and water systems, ensuring compliance with the company’s requirements.
• Lead and manage change control on project activities or act as technical advisor for system modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget, and qualification of facilities in accordance with site to approved procedures.
• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.
• Develop commissioning, qualification (IQ, OQ) activities are executed accordingly and in compliance.
• Maintain HVAC and Purified water systems are in optimum condition in compliance with Good Manufacturing Practice (GMP) & EHS requirements.
• Lead/participate in equipment failure troubleshooting and deviation investigations whenever required.
• Provide input during Basis of Design (BOD) and Detailed Design during large capital projects, applying good maintenance and reliability engineering principles whenever required.

Enhance and uphold maintenance quality.

• Implements technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies)
• Supports Maintenance Lead to meet Profit Plan targets, optimize maintenance and product standard cost effectiveness in accordance with cGMP and Safety guidelines.
• Responsible for improving the reliability of equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.
• Lead and perform Root Cause Analysis (RCA) for surfaced issues and implement a robust solution.

Operations excellence

• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program and also ensures that the work is done in accordance with schedule and specification.
• Regularly review and revise maintenance program and procedures to increase equipment reliability, reduce waste and improve overall asset care process & cost efficiency.
• Work with Engineering & Safety, Health & Environment (SHE) to execute a 'reliability-centric’ maintenance plan.
• Share best practices and lessons learned with the objective of improving asset utilization.
• Undertake activities to support realization of production, maintenance and product cost effectiveness with emphasis on equipment reliability and maintenance expenses.
• Conducts Maintenance effectiveness / optimization reviews along with IPT maintenance leads/Engineers/Technicians.

Continuous Improvements (CI)

• Utilize Lean methodologies such as 5S, Standard Work, real-time problem solving (RTPS), to support execution of continuous improvement activities.
• Support the development of continuous improvement framework and work with the Maintenance team to identify opportunities.
• Compile and review data and develops action plans for critical HVAC systems and Purified water systems to improve reliability and reduce M&R cost.
• Identify water and HVAC system repair and replacement projects, plan and develop schedules, acquire materials, prepare budgets, and develop an RFC for job execution.
• Effective project management ensures that jobs are completed on time, within budget,

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 5 to 8 years of maintenance work experience in Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Analytical and Problems solving skill with regard to Purified water system and HVAC Systems
• Knowledge in HVAC and Purified water system operation and Maintenance principle.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Knowledge of various clean room standards across the Pharmaceutical Manufacturing Industry will be an added advantage.
• Familiar with Life cycle of the HVAC system (from design, operations, controls monitoring, maintenance and obsolescence management).
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Demonstrated use of Reliability analysis tools such as FME, RCFA, etc.

Professional Competencies

• Resilient and resourceful
• Good oral/written communication and interpersonal skills
• Continuous learning mindset
• Foster team collaboration
• Strong work ethics

Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

Responsibilities:

· Provide timely IT support to all company users, and when necessary, liaise with vendors for support.

· Leveraging technologies to help in improving the organization's efficiencies and productivity.

· Ability to troubleshoot network, hardware, and software problems.

· Company Windows server maintenance.

· Responding in a timely manner to service issues and requests.

Requirements

· Minimum 1-2 years relevant experience in IT infrastructure.

· Knowledge in TCP/IP, DHCP, Windows systems, and Windows Server.

· It would be better if there's understanding about smart factory settings such as IoT, MQTT, etc.

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

About the role

To support R&D department in conducting laboratory tests, sample preparation and executing technical and quality control documentation/testing while co-ordinating with various departments to ensure smooth running of the organisation.

Roles & Responsibilities

Sample Preparation

• Receive and label all raw materials brought into the lab for accountability.
• Maintain inventory of chemicals.
• Prepare materials for experiment and assist R&D activities..
• Assist R&D Engineer to conduct experiments and operate equipment.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• 
  

Measurement & Calibration

• Perform periodic calibration of equipment and reporting of any malfunctions.
• Assist in troubleshooting and maintenance of all testing equipment.
• Ensure proper housekeeping of laboratory on a daily basis.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Perform Laboratory Data Analysis and Reporting

• Recording and reporting of experimental results and trends.

Quality Control

• Perform in process quality check and physical test on in-process materials & finished products
• Testing of properties of aerogel products and co-ordinating with 3rd party laboratories.
• Prepare QC documents for all batches in production department

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Assist workplace safety initiatives.
• Implement and manage waste disposal and coordinate with chemical disposal companies.

Requirements

• ITE / Diploma in Chemical Engineering, Chemistry, Biotech, Lifesciences and Pharma etc.
• Years of work experience: At least 1 - 3 years.
• Training will be provided.
• Knowledge of safe handling of chemicals
• Possess basic computer skills and Microsoft Office applications.
• Team player and able to work independently

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Qua_Ctrl in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, details of your educational background and work experience.

JOB DESCRIPTIONS:

• Carry out routine inspection and maintenance on company’s construction equipment
• Dismantles defective equipment and install new or repaired mechanical and electrical parts
• Handles & follows up on equipment issues such as repair & maintenance of electrical and mechanical equipment
• Carrying out mechanical and electrical maintenance, repairing and servicing tasks
• Supervise installation / renovation / replacement works on facilities and equipment which are carried out by vendors / contractors and ensures all works are carried out appropriately
• Troubleshoot and perform minor repairs on M&E services & installation for the building, which includes but not limited to general handyman work in fitting, installation, electrical wiring, plumbing, painter, carpentry and etc.
• Install, test, and commission mechanical and electrical systems and equipment, including heating, ventilation, air conditioning (HVAC), plumbing, electrical wiring, and other critical systems.
• Liaise & supervise the appointed contractors / Term Contractor for any maintenance, repairs and / or renovation works and to ensure standard of work is performed
• Communicate effectively with clients, supervisors, or contractors regarding system status, repairs, and timelines.
• Support foreman / manager in supervision of night site works, ensuring that safety regulations are adhered to when carrying out maintenance works
• Co-ordinate job site activities to consistently meet timeline, customer / client job requirements, SOPs, and statutory regulations
• Carry out any other duties or instructions assigned by the Management

JOB REQUIREMENTS:

• N/O Level/ Higher /Nitec/ Diploma
• Preferably with atleast 5 years of relevant experience in a similar capacity
• Required to work hands-on and in Non-Aircon environment
• Able to be on standby after office hours for any technical / electrical works default.
• Possess knowledge of cable & wiring, AC/ DC drives & inverter motors
• Candidates must have class 3 driving licence. Need to travel from time to time for business needs.
• Able to interpret blueprints, technical drawings and sketches to calculate requirements
• Knowledge on mechanical, electrical and building system, including using of hand and electrical tools
• Regularly inspect and monitor mechanical and electrical systems to detect any performance issues or wear.
• Must be able to read technical manuals and drawings
• Must be able to meet the physical requirements of the job which include bending, lifting heavy equipment and working in confined spaces
• Ability to work in physically demanding conditions and handle equipment with precision.
• Must be able to work shifts, weekends and public holiday when necessary
• Able to manage multiple projects within the scope of work and stay on task
• Able to work well under pressure with minimal supervision

Company Overview

Atera Water is a Singaporean water technology start-up, specialising in providing filtration membrane solutions for water and wastewater treatment. The company specialize in economically viable and environmentally friendly filtration technologies, designed to empower communities to tackle water challenges amidst climate change and high costs of advanced filtration membranes.

The company is scaling up our membrane production for pilot and commercial projects in SEA region. We are looking for full-time technician to support the manufacturing of membrane products.

Responsibilities

1. To support membrane manufacturing activities, which includes fibre spinning, looping, stretching and treatment process.

2. To assist in managing inventory of raw materials, components, and finished products

3. To maintain proper records of each batch of newly manufactured products and ensure proper labelling and documentation.

4. To assist in preventive maintenance, checking, inspection and troubleshooting of manufacturing equipment.

5. To ensure that membrane products are manufactured with appropriate quality and on schedule with project or customer requirement.

6. To comply with standards, regulations and safe work practices.

7. To provide supporting duties for product testing, when required.

Requirements

· Minimum Higher NITEC/Professional Certificate in Engineering or Manufacturing or equivalent

· Diploma without experience is welcome to apply and willing to be trained

· Experience in polymer processing and extrusion processes would be an advantage

· Possess a positive attitude and sense of urgency

· Meticulous, keen attention to details and organized.

· Team player and able to work independently

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Perform hands-on mechanical/electrical assembly tasks within the standard time
• Ensure that the assembled machine is according to Makino's quality standards
• Responsible for keying the operation time into EES for performance measurement
• Responsible for housekeeping and ensuring that the assigned machine area is clean and tidy
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job requirements:

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• Experience working in Assembly/Production is an added advantage
• Able to work shifts and commit to overtime on weekdays and weekends when required
• Able to handle physical work and stand for long hours
• Able to read and interpret drawings
• Have the initiative to learn and produce quality outcome
• Responsible and committed to the assigned task
• Team player and able to work independently