An Mechanical Engineering Technician is largely responsible for diagnosing and repairing vehicle engine systems.

. Repair brake and steering systems

. Diagnose and repair electrical and electronic systems

. Replace or repair transmissions and fuel components as needed

. Repair cooling components and systems including air conditioners and engine cooling system

. Perform emissions inspections, safety checks and similar state-regulated vehicle examinations

. Perform preventive maintenance, checking and inspection, troubleshooting, repairs and overhauls of

motors/gear system

. Perform other ad-hoc duties as assigned by immediate supervisor

. Maintain a clean, safe working environment

Requirements

. Proactive and able to work independently in a fast-paced environment

. Responsible and dedicated team player

. Class 3 driving licence would be preferred

Job Description

• To be able read Electrical/Instrumentation Drawings

• Experience in Electrical wiring troubleshooting

• Has Knowledge in Instrumentation & Motor Control

Job Requirement

• ITE in Electrical

• Able to write Service Report

• Able to follow the safety procedure

• Computer Literate

• Can work independently

• Willing to work overseas & accept offshore/onboard assignment

Job Benefits

• Positive and close knitted working environment

• Training Provided

• Onboard Allowances

• Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• Annual leaves starting with 14 days and up to 21 days

Working location:

15 Kwong Min Road

Singapore 628718

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

FOOD PRODUCTION TECHNICIAN Job description

A Food Production technician is responsible for preparing and processing foods, ensuring that production meets quality standards and is delivered in a timely manner. Duties include operating small kitchen equitments like Mixer Grinder, Deep Frier, Buy Electric Cookers, packing and monitoring product quality.

A food production technician is need to prepare and package foods according to the company's standards. Food production workers may also be responsible for maintaining a safe and hygienic working environment, following food safety regulations and ensuring products meet food safety requirements.

Duties and Responsibilities

• Assist with the preparation of food items

• Ensure the kitchen and production area are kept clean and tidy

• Check ingredients and food products for quality

• Package food items ready for sale

• Follow food safety regulations and health codes

• Preparing ingredients for the shift; washing vegetables, chopping, seasoning meat, etc.

• Preparing deep fryer, utensils, and grill for shift

• Roti prate flour mixing

• Ready to cook Goring items (nasi,ikanpils,mee,kwithya,noodles)

• preparation of south indian & north indian curies

• Cooking order according to food health and safety standards

• Delivering food order to wait staff in a timely manner

• Storing all food properly

• Sanitizing and cleaning work stations and utensils

• Reordering stock and food supplies

• Monitoring other cooks and team members

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

FOOD PRODUCTION TECHNICIAN Job description

A Food Production technician is responsible for preparing and processing foods, ensuring that production meets quality standards and is delivered in a timely manner. Duties include operating small kitchen equitments like Mixer Grinder, Deep Frier, Buy Electric Cookers, packing and monitoring product quality.

A food production technician is need to prepare and package foods according to the company's standards. Food production workers may also be responsible for maintaining a safe and hygienic working environment, following food safety regulations and ensuring products meet food safety requirements.

Duties and Responsibilities

• Assist with the preparation of food items

• Ensure the kitchen and production area are kept clean and tidy

• Check ingredients and food products for quality

• Package food items ready for sale

• Follow food safety regulations and health codes

• Preparing ingredients for the shift; washing vegetables, chopping, seasoning meat, etc.

• Preparing deep fryer, utensils, and grill for shift

• Roti prate flour mixing

• Ready to cook Goring items (nasi,ikanpils,mee,kwithya,noodles)

• preparation of south indian & north indian curies

• Cooking order according to food health and safety standards

• Delivering food order to wait staff in a timely manner

• Storing all food properly

• Sanitizing and cleaning work stations and utensils

• Reordering stock and food supplies

• Monitoring other cooks and team members

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

FOOD PRODUCTION TECHNICIAN Job description

A Food Production technician is responsible for preparing and processing foods, ensuring that production meets quality standards and is delivered in a timely manner. Duties include operating small kitchen equitments like Mixer Grinder, Deep Frier, Buy Electric Cookers, packing and monitoring product quality.

A food production technician is need to prepare and package foods according to the company's standards. Food production workers may also be responsible for maintaining a safe and hygienic working environment, following food safety regulations and ensuring products meet food safety requirements.

Duties and Responsibilities

• Assist with the preparation of food items

• Ensure the kitchen and production area are kept clean and tidy

• Check ingredients and food products for quality

• Package food items ready for sale

• Follow food safety regulations and health codes

• Preparing ingredients for the shift; washing vegetables, chopping, seasoning meat, etc.

• Preparing deep fryer, utensils, and grill for shift

• Roti prate flour mixing

• Ready to cook Goring items (nasi,ikanpils,mee,kwithya,noodles)

• preparation of south indian & north indian curies

• Cooking order according to food health and safety standards

• Delivering food order to wait staff in a timely manner

• Storing all food properly

• Sanitizing and cleaning work stations and utensils

• Reordering stock and food supplies

• Monitoring other cooks and team members

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

1. Production Operation:

• Operate and monitor manufacturing for veterinary
• Follow standard operating procedures (SOPs) to ensure quality and efficiency.

2. Quality Control:

• Conduct routine inspections to ensure products meet quality standards.
• Identify and report any deviations or issues in the manufacturing process.

3. Adherence to Safety Protocols:

• Follow safety guidelines and protocols to maintain a secure working environment.
• Report any safety concerns or incidents promptly.

4. Documentation:

• Maintain accurate records of production activities and quality checks.
• Complete required paperwork to comply with regulatory standards.
• Participate in discussions to identify areas for process improvement.

5. Compliance:

• Ensure compliance with relevant industry regulations and guidelines.
• Stay informed about updates in manufacturing practices and veterinary product regulations.

Able to work under stress.

Good team player.

Perform regular maintenance on equipment used in the construction project.

Basic knowledge of hydraulic systems and hydraulic pumps.

Conduct inspection regularly on the machinery /equipment to ensure a smooth operation process.

Carry out routine servicing of equipment as part of a measure to prevent breakdowns and malfunction, which could thwart operation activities.

Install, assemble and test new machines and equipment.

Carry out mechanical and basic electrical troubleshooting and repair of machinery.

Ensuring repairs, installations and preventive maintenance on equipment are completed on time and safety.

Perform any other duties as assigned by the Manager.

Required to go to the construction site and work overtime if necessary.

Basic Responsibilities:

Ø Fabricate and test perovskite solar cells.

Ø Effectively execute related experimental arrangements.

Ø Participate in maintaining laboratory equipment.

Ø Design, execute, and analyze experiments, and submit reports and analyses as required.

Ø Strong written and verbal communication skills.

Ø Other responsibilities, and job description subject to change at any time.

Education/Experience:

Bachelor's or master's degree in engineering or a similar technical discipline, majoring in materials, chemistry, physics, electronics, or a similar field.

Required Skills/Competencies:

Ø Experience with photovoltaics is preferred.

Ø Some experience working in a chemical/material/semiconductor laboratory.

Ø Basic understanding of materials science, semiconductor device physics, and chemistry.

Ø Ability to handle complex data, analyze, and communicate results effectively.

Ø Ability to coordinate activities between various engineering and operations teams. Good verbal and written communication skills.

FOOD PRODUCTION TECHNICIAN Job description

A Food Production technician is responsible for preparing and processing foods, ensuring that production meets quality standards and is delivered in a timely manner. Duties include operating small kitchen equitments like Mixer Grinder, Deep Frier, Buy Electric Cookers, packing and monitoring product quality.

A food production technician is need to prepare and package foods according to the company's standards. Food production workers may also be responsible for maintaining a safe and hygienic working environment, following food safety regulations and ensuring products meet food safety requirements.

Duties and Responsibilities

• Assist with the preparation of food items

• Ensure the kitchen and production area are kept clean and tidy

• Check ingredients and food products for quality

• Package food items ready for sale

• Follow food safety regulations and health codes

• Preparing ingredients for the shift; washing vegetables, chopping, seasoning meat, etc.

• Preparing deep fryer, utensils, and grill for shift

• Roti prate flour mixing

• Ready to cook Goring items (nasi,ikanpils,mee,kwithya,noodles)

• preparation of south indian & north indian curies

• Cooking order according to food health and safety standards

• Delivering food order to wait staff in a timely manner

• Storing all food properly

• Sanitizing and cleaning work stations and utensils

• Reordering stock and food supplies

• Monitoring other cooks and team members

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

Job Description:

- Operate CNC machines to perform tasks.

- Set machines to complete full cycles to fabricate parts.

- Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result.

- Prepare a test run to check if the machines produce outputs according to specifications.

- Prepare and load raw materials and parts onto the machines.

- Understand specifications of the task at hand and the desired result.

- Check and maintain and upkeep machinery daily to ensure functionality.

- Uphold good housekeeping.

Job Requirements:

- Nitec/ Higher Nitec in Precision Machining/ Mechanical Technology or equivalent.

- Good communication skills.

- Able to work as a team.

- Good CNC programming knowledge.

- Able to read and interpret technical drawings.

- Good technical knowledge on various machining and tooling techniques.

- Able to work efficiently and independently.

Job description

JOB PURPOSE

To support the Commercial Diving Department by performing maintenance, repairs, and inspections of leisure and commercial diving equipment. The Junior Diving Technician will ensure all equipment operates efficiently and meets safety standards, enhancing operational reliability and customer satisfaction.

DUTIES & RESPONSIBILITIES

Equipment Maintenance and Repair:

• Inspect, service, and repair diving regulators, BCDs, breathing air compressors, and associated equipment.
• Perform hydrotesting of diving cylinders and ensure compliance with regulatory standards.
• Conduct air quality analysis for compressors to maintain safe breathing air standards.

Commercial Equipment Support:

• Assist in the maintenance and troubleshooting of Surface Rescue Panels (SRP), cascade systems, and Launch and Recovery Systems (LARS).
• Support the repair and maintenance of decompression chambers and other specialized commercial diving systems.

Technical Operations:

• Perform routine checks and diagnostics on all diving-related equipment.
• Keep detailed records of maintenance, inspections, and repairs for compliance and quality assurance.

Customer Support:

• Provide technical guidance to customers regarding the use and care of diving equipment.
• Address client inquiries and ensure high levels of service satisfaction.

Health and Safety:

• Adhere to workplace safety protocols and industry standards
• Identify potential risks during equipment handling and mitigate them effectively.

MINIMUM QUALIFICATIONS AND EXPERIENCE

Education: Diploma or Degree in Mechanical, Electrical, Marine, or related engineering disciplines.

Experience:

• Minimum 1-2 years of experience in servicing diving equipment.
• Hands-on experience with regulators, BA compressors, hydrotesting, and air quality analysis.

Exposure to SRP panels, cascade systems, LARS, and chambers will be an added advantage

KEY SKILLS AND COMPETENCIES

FUNCTIONAL SKILLS & COMPETENCIES

Technical Skills:

• Proficiency in repairing and maintaining diving equipment.
• Knowledge of commercial diving systems and their operation.
• Familiarity with air quality testing standards and hydrotesting processes.

Core Competencies:

• Problem-solving and troubleshooting abilities.
• Precision and attention to detail in technical tasks.
• Strong organizational skills for maintaining records and workflows.

GENERAL SKILLS & COMPETENCIES

• Effective communication skills for customer and team interactions.
• Ability to work independently and as part of a team in a fast-paced environment.

Commitment to continuous learning and staying updated with industry advancements.

Job Type: Full-time

Work Location: In person

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Are you interested in joining a team that is revolutionising the resource exploration and navigation industry? At Atomionics, we are building quantum sensors using Atom Interferometry - harnessing the potential of the wave-nature of atoms - for resource exploration.

Atomionics is an early-stage, fast growing startup based in Singapore, backed by fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

The Opportunity

This is an exciting role that involves travel, working in dynamic, real-world environments, and hands-on engagement with pioneering quantum technology. As a Field Technician, you’ll play a critical role in supporting the deployment of our unique Quantum Gravimeter at survey sites, such as in the Northern Territory, Australia, and Arizona, USA.

Responsibilities

• Troubleshoot On-Site Issues: Identify and address technical issues on-site promptly, performing necessary repairs or adjustments to maintain sensor accuracy.
• Conduct Routine Inspections and Testing: Regularly assess the performance of equipment, conduct diagnostics, and verify sensor calibration for data integrity.
• Deploy and Maintain Equipment: Set up and ensure proper functioning of quantum sensors and gravimeters in various field locations, including rugged or remote environments.
• Document Procedures and Findings: Maintain accurate records of maintenance activities, troubleshooting steps, and solutions for future reference and compliance.
• Collaborate with Internal Teams: Provide feedback to engineering and operations teams about equipment performance and potential improvements, contributing to product refinement.

About you

• You have 1-2 years experience in a technician role, ideally in a technology-intensive environment, with exposure to sensor or electronics maintenance.
• You have an ITE or a Diploma in electronics, mechanical engineering, or a related field.
• You are proficient in diagnosing and repairing mechanical and electronic systems.
• You are able to work outdoors in varying conditions, and travel frequently to remote locations (Australia, USA, etc.).
• A valid driver’s license and a clean driving record, as regular travel is required.

What we can offer you

• A chance to learn about the intricacies of deep tech research, product development, and strategy in a high-growth startup
• On-the-job training and real responsibility within the business
• Impactful work at the cutting edge of quantum technology
• Board games and curry night

* To provide mechanical engineering design expertise during the detailed design phase

* Will be involved in all aspects of the mechanical engineering design and installation supervision

* Engineering package development for cogeneration, flue gas treatment, pressurized equipment, pump, fan, piping etc.

* To prepare tender documents, b i d analysis, operating & maintenance procedures, mechanical drawings and piping layout.

* Assist in the assessment of construction costs, maintenance cost, and safety studies.

Engineering Technician EIC

Location: Pioneer, Singapore

Reporting to: Site Engineering Manager

As the Engineer Technician, you will carry out maintenance, troubleshooting and/or improvement activities to the Electrical system, Instrumentation and Control (Automation) to ensure optimum uptime of the equipment and plant.

Main Responsibilities:

• Execute troubleshooting corrective and preventive maintenance work for related equipment in a timely, cost effective and safe manner and to minimize production down time.

• Instrumentation, transmitters / switches / detectors, control panels, PLCs and SCADA
• Electrical, earthing, motor, motor control centres, variable frequency drive
• Access and troubleshoot of PLC program logics

• Identify and prioritize the production criticality and equipment availability
• Work with engineer to setup maintenance plan (preventive and predictive) and vendor service agreement
• Identify, estimate and plan the resources (manpower, material and time) required for forthcoming / planned maintenance tasks • Work with engineer to carry out improvement and monitor performance of equipment for optimization of equipment functionality
• Liaise and coordinate with vendors/contractors for equipment maintenance and repairs
• Support and attend to daily ad hoc request with regards to maintenance and improvement works
• Keep track of equipment spares and work with maintenance planner to replenish the spares upon depletion
• Support to develop Preventive Maintenance SOP/Procedures and tasks to maintain plant assets.
• Attend to off-office hour call back by user to repair equipment breakdown
• Plan, organize and supervise work performed by in-house contractor and external contractor engaged for maintenance work.
• Learn safety policies and guide external contractors on site requirements
• As authorized permit to work applicant
• Good record keeping in all involved tasks relevant data in SAP
• Adherence and support EHS initiatives and compliance
• Maintain and support all site activities according to accreditation standards in the scope of the QMS [ISO 9001 & Good Manufacturing Practice (GMP)]

Academic Background

• NITEC/ITC/Diploma in Electrical, Instrumentation, Control and/or Automotive background

Technical Skills

• Familiar with basic SAP Plant Maintenance function (module)
• With some experience with the Programme Logic Control (PLC) and Supervisory Control and Data Acquisition (SCADA) system
• Good knowledge of EHS rules and guidelines. • Good coordination skills with contractors/vendors
• Able to interpret P&ID, electrical single line diagram, instrument hook up drawing, SCADA network drawing, instrument datasheet etc
• Able to organized and have good interpersonal skills
• Well verse in Microsoft office (e.g. Words and Excel)

Professional experience

• 3 to 10 years of experience in maintenance or projects work

Our Benefits

• We offer attractive package with benefits
• Excellent opportunities for progressive learning and development
• A creative team environment that will inspire you
• Comprehensive healthcare plans
• PTO and family leave

Main responsabilités :

● To deliver or collect machines for after sale and hire fleet customers.

● Performance of repairs, servicing, preventive maintenance program and quotation job on site.

● Conduct Training for Operators on the correct method of operation and daily check maintenance of the new and hired fleet machine on site.

● Assist PE inspection for sale and hire machine fleet on site.

● Any other technical related aspects as and when required.

● Responsibility for complete customer satisfaction within the work area. Assists in planning, communicating, and coordinating support plans with customers.

● Complies with all safety procedures and consistently demonstrates safety as a value.

● General service report writing for internal and external customers.

● Ensure the excellence of services by strictly adhering to company standards and policies

● Thoroughly follow up on all open technical issues until the problems are fully resolved

● To travel and carry out machine troubleshooting, repair work or rectification and servicing jobs onsite.

● Write and submit service reports to customers based on the job done.

● Work as a team to maintain and expand customer base.

● Collaborate with the team to manage and schedule service calls effectively.

● To record and submit all service data and reports as and when required

● To provide accurate, factual reports to the team leader or technical support personnel to enable informed decisions to be made on a course of action to resolve product issues.

● To carry out machine diagnostic using special diagnostic tools such as,

-Manipad Diagnostic Tool

-I.V Special Tools

-Boom Lift / Scissors Lift Diagnostic Calibrator Tool

● To utilize Manitou, Genie, JLG & Skyjack diagnostic tools

EDUCATION:

• Higher Nitec in Mechanical or Automotive.
• Diploma in Mechanical or Automotive.

EXPERIENCE:

• Minimum of 2-3 years of field service support.
• Ability to work independently.
• Mechanical, Electrical and Hydraulic System troubleshooting skill.
• Experience working with a wide range of brands and models in the aerial equipment industry.
• Familiarity with diagnostic tools and software
• Proven experience in servicing boom lifts, scissor lifts, and other aerial work platforms.
• Ability to read and interpret schematics, technical drawings, and service manuals.
• Excellent communication skills and a customer-focused attitude.

Requirement:

• Valid driving license (mandatory).

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Provide Leadership to the Electrical engineering team to comply with project requirements and to meet project schedules.
• Lead and prepare overall concept.
• Lead, prepare, & review Request for Quotations (RFQs) and specifications. Lead EPC tender as the lead for Electrical.
• Review technical proposals from OEMs to ensure compliance to our design requirement.
• Plan & Manage the Electrical Master document List.
• Plan & Manage manpower loading.
• Review cable routing, BOQ, lead engineers and drafters.

Able to understand and manage the following:
Subcontractor's submission of 66kV, 6.6kV & LV power supply system including; Power Generation System, transformer, UPS & DC systems.
Electrical Single Line drawings
Power system Analysis by ETAP
Protection coordination
Cable Size calculation
HV, MV and LV motor starter system
UPS & DC system
Solar generation system
Power Management System
Plan & coordinate Electrical Room layout
Plan & coordinate Cable tray and Busduct

Familiar with the following Equipment and System:
Generators
Circuit breakers
Transformers
VSDs
Busducts
Civil interface for switchboard installation, pull pit and penetration.

Requirements

• At least 10 years of relevant experience as Leader or Senior Electrical Engineer in EPC projects.
• Bachelor’s degree in electrical engineering or equivalent
• Leadership & people management skills
• Familiar with industrial standard, e.g, ISO, IEEE, and etc. and Singapore standard, e.g. SS638
• Familiar with statutory Regulation or Code, like Singapore transmission code. etc.
• Able to work in collaboration with various disciplines
• Able to interface seamlessly with engineering, construction, and operations contractors
• Able to work on-site in construction environment

Work location: Tuas Nexus

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Efficiently and effectively manage and operate assigned processing or packaging operation according to the standardized operating procedures, guides and manual
• Ensure the correct cleaning and sanitation of processing equipment are rendered following Good Manufacturing practices

Job Requirement

• A good team player to achieve production targets
• Self motivated and work with least supervision
• Able to be on the feet for long hours
• Transportation provided
• Candidates with relevant experience are preferable
• More focused on attitude rather than educational level
• 5.5 days week with OT's & perks

Benefits:

• 14 days of annual leave per year. Prorated based on join date.
• Variable bonus.
• Meal allowance.
• Annual health screening.
• Dental reimbursement.
• Hospitalisation insurance.
• Specialist treatment coverage.
• Annual allocated training hours for each employee.

Responsibilities:

• To adhere to prevailing Company SOPs including service KPIs.
• To carry out indoor and outdoor service jobs (commission, repair, troubleshoot, inspection, modification, warranty checks).
• To investigate customer complaints (product defects, failures or non-conformance) and recommend solutions.
• To issue customer outdoor and indoor service reports.
• To disassemble cancelled units for stock return.
• To provide service and maintenance training sessions on product usage for customers.
• To perform routine maintenance and repair work on inverters and gear motors.
• To report discrepancies if any.

Requirements:

• ITE (Mechanical Engineering) with 1 year of relevant work experience.
• Basic proficiency in English (both written and spoken) is mandatory.

Work Conditions:

• Must be comfortable working outdoors in order to repair and service inverters and gear motors.
• Must be willing to be on standby for after office hours for service activiation, with OT payment.
• Must be willing to commute to clients' site for servicing. Transport reimbursement is provided for commute between the office and client sites.
• Work-at-height is required at some clients' sites.
• Must be open to occasional overseas work on adhoc activation basis.

Job Description & Requirements

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

JOB SUMMARY:

The Engineering Technician is responsible for ensuring the efficient operation of all hotel facilities, systems, and equipment to guarantee guest comfort, safety, and satisfaction. This role requires proactive maintenance, repair work, and troubleshooting to address any technical issues within the hotel. The Engineering Technician will work closely with other hotel departments to support operational needs, uphold safety standards, and ensure that all technical systems function properly, contributing to an overall exceptional guest experience.

WHAT YOU WILL BE DOING:

• Guest and Facility Support:Ensure the smooth operation of all hotel systems, including HVAC, plumbing, electrical, and mechanical systems, for the safety and comfort of guests.
  Respond promptly to guest requests and issues related to the hotel’s facilities, ensuring minimal disruption and maximum satisfaction.
  Carry out preventive maintenance tasks, addressing any technical issues before they impact guests.
  Assist with repairs of guest rooms, public areas, and common hotel facilities, ensuring guest comfort and operational efficiency.
  
• System & Equipment Management:Regularly inspect hotel equipment, including heating, cooling, plumbing, and electrical systems, to ensure proper operation and compliance with safety standards.
  Perform troubleshooting and repairs to hotel systems, machinery, and equipment, identifying and resolving issues quickly and effectively.
  Maintain a clean and organized mechanical room, ensuring all tools and supplies are readily available and properly stored.
  Document maintenance activities, including repairs and inspections, in the Duty Log to ensure clear communication and follow-up on any unresolved issues.
  
• Safety & Compliance:Ensure compliance with all safety protocols, building codes, and hotel standards.
  Respond to emergency situations, including fire alarms, water leaks, or power failures, ensuring a safe and quick resolution.
  Conduct safety checks on all hotel systems and infrastructure to identify and prevent potential hazards.
  Assist in emergency drills and safety training, ensuring the hotel staff is well-prepared for any situation.
  
• Collaboration with Hotel Departments:Work closely with other hotel departments, including housekeeping, front desk, and security, to address maintenance issues promptly and prevent any inconvenience to guests.
  Assist in setting up and maintaining hotel equipment for special events or large group functions as needed.
  Provide technical support to other hotel staff, offering guidance or assistance on maintenance-related tasks when necessary.
  
• Other Operational Duties:Ensure that all hotel vehicles, including buggies and other transport equipment, are properly maintained, clean, and in working condition.
  Recharge and maintain the hotel's buggy fleet, ensuring it is operational and ready for use by guests and staff.
  Maintain a tidy and organized environment in all work areas, ensuring that tools and supplies are stored appropriately.
  Perform other duties as requested by supervisors or hotel management to support the hotel's operational needs.
  

YOUR EXPERIENCE AND SKILLS INCLUDE :

• Strong verbal communication skills, allowing for effective communication with guests and hotel staff.
• Ability to work cohesively with a team, building positive relationships with colleagues and departments.
• A proactive, solutions-oriented mindset, with an ability to stay calm and professional in urgent situations.
• Strong attention to detail and a commitment to providing high-quality service.
• Ability to work in a multi-cultural environment, demonstrating respect and understanding for diverse guest needs and backgrounds.

Qualifications:

• Secondary/High School education required; technical certifications in engineering or maintenance preferred.
• Possess a valid driving license.
• Minimum 1 year of experience in hospitality, facilities management, or a technical role.
• At least 2 years of experience in maintenance, repair, or engineering, with hands-on experience in troubleshooting systems and equipment.
• Previous experience in a hotel or similar service environment is an advantage.
• Knowledge of building systems, including HVAC, plumbing, electrical systems, and mechanical equipment.