Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency.
• Attend to ad hoc job at train and bus depots.
• Responsible for personal and safety of others accordance to workplace and health safety act.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

• Attractive Benefits Package
• 5 days work week
• Medical and dental benefit

THE PERSON:

– ITE Trade Certification

– 3-5 years in related field

– Electrical system and mechanical knowledge

– Technical and customer service

THE JOB:

– To provide service, diagnosing problems and troubleshooting equipment

– Replacing faulty equipment

– Be a team-player

– Training will be provided

Job Description & Requirements

1. Liaise with the Sales Dept , Finance Dept , Warehouse and Shipping Executive on purchase , L/C opening , arrival of consignment etc

2. Check on order status and stock and catalogue availability through computer for order raised by the sales personnel

3. Check and verify the Sales Contract from supplier’s against P.O.

4. Check and verify the D.O. and Invoice received against P.O. and Goods Receipt Note

5. Update order control register and GRN into computer when the goods are received

6. Maintain new items, location changes , inventory adjustment into computer

7. Raise claim forms for short supply or damage goods to suppliers and follow up on the matters , whenever necessary

8. Follow up on outstanding orders and delivery schedules of orders

9. Prepare and type documents , A&P support etc. required within the Dept

10. Handle daily correspondence independently pertaining to the administration of the purchasing function

11. Attend to customer’s inquiries in the office

12. Ensure proper documentation procedures are adhered to by the Dept and recommend improvement , if any

13. Monitor and maintain proper filing system for easy retrieval of information

14. Collect all Tender Notice related to Power & Services products and inform Manager and /or person-in-charge

15. To follow up on the correspondence with the principal and customer

16. To prepare and assist in delivery order , invoice and confirmation of order upon receiving sales order

17. Prepare reports for Dept reporting and decision making purpose

18. Provide administrative support to the Dept

Requirement:

• Min GCE “O” Level or equivalent
• Min 2 years’ experience in similar capacity

· Good computer skills especially in MS Office Software

· Experience with SAP is highly preferred

· Possess good interpersonal & communication skills

· Meticulous and attentive to details

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.
• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.
• Perform and maintain the documentation of operations in accordance with cGMP requirement.
• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.
• Perform online monitoring of in process parameters / checks throughout the batch.
• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.
• Perform all activities in accordance with cGMP.
• Maintain the cleanliness of work area to ensure cGMP compliance.
• Perform all other relevant duties required to meet the schedule.
• Check relevant material and product details against batch document
• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.
• Involve in equipment / process qualification.
• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.
• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.
• Experience in tablet coating of oral solid dosage manufacturing is preferred.
• A good team player with positive learning attitude.
• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology /Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines
• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.
• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

What a System Interaction Engineer does at HP:

• Partner with the R&D, NPI and Manufacturing teams for both Supplies and Printer organizations to deliver on program deliverables.
• Define and design System Interaction testing to evaluate product performance and programs intent of meeting or exceeding customer experience.
• Collaborate with Supplies Quality team to analyze defects, understand root cause and define solutions to improve product quality.
• Automate and digitize current Test Flow for better efficiency and effectiveness.

Individuals who do well in this role at HP, usually possess:

• Bachelor's or master’s degree in Mechanical Engineering, Manufacturing Engineering, Electronic and Electrical Engineering, or equivalent.
• Typically, 0-1 years’ experience.
• Software development, python coding and RPA experience.
• Strong technical engineering leadership and capabilities.
• Effective leadership on planning, execution, and issue resolution.
• Demonstrated analytical and empirical problem-solving skills.
• Demonstrates growth mindset hallmark.
• System thinker, looking for connections, and comfortable with things being dynamic.
• Good flexibility and adaptability are key.
• Possesses strong teamwork and ability to collaborate with cross function teams.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Responsibilities:

• To perform mechanical fitting job, machine assembly and maintenance, which requires knowledge of machine fits and tolerances
• To lead a team of technicians in preventive maintenance, checking and inspection, troubleshooting, repairs and overhauls of machinery and equipment having assigned and allocated resources to meet targets through planned and scheduled annual maintenance activities
• To carry out metal working for hot works
• To execute welding work
• To operate heavy machinery and perform lifting works
• To read mechanical drawing

Job Requirements:

• Candidate must possess at least secondary school education/ NITEC
• Past experiences in heavy industry/ metal fabrication shops/ machine maintenance will be preferred
• Candidate should possess basic knowledge of computer and data entry, and basic command of English (ability to read, write and speak)
• Able to work rotation shift and weekends

Job Description:

• To record daily output data and submit to leader.
• Setting up machines during changeover of part.
• Trouble shoot production related quality issues.
• To attend daily morning briefing conduct by leader and provide status update.
• To communicate on the status on each machine before shift hand over.
• Ensure own responsible machines to be warm up before start of shift.
• To report any scrap or technical issue to leader faced during processing.
• To ensure respective in-charge machines are fully utilize.
• Inform leader if machine is faulty/down to avoid delay in delivery.

Prerequisites:

• Minimum ‘O’ Levels, Higher Nitec/Diploma in Engineering (Mechanical/Electrical/Electronics), or its equivalent.
• Minimum 2-3 years of working experience in production environment preferred.
• Experience in setup and operating single point diamond turning machine.
• Preferably some years of work experience in related or relevant work experience in optics manufacturing.
• Must be able to understand and communicate in English.
• Able to carry heavy items (segments or tooling).
• Willing to perform rotating shifts.

Job Description & Requirements

1.Removes, applies and repair ceramic tile and other similar solid materials to floors, walls and ceilings

2.Compliance with materials / workmanship schedules

3.Lay bricks or blocks

4.Mix and apply glues, cements and grouts

Prepare cement floors, sidewalks, stairs and curbing

5.Install grout for new and existing door jamb

6.Apply non skid surfaces, safety strips

7.Prep flooring surfaces for floor coverings

8.Preparing and mixing different types of raw materials to get the plaster ready

9.· Hanging pictures, paper towel holders, sharps dispensers, soap dispensers

10.Preparatory to painting, make repairs in plaster, sheetrock, and masonry surfaces

11.Repair plaster,Lay brick and block.

12.Removal or make arrangements for the removal of waste/debris on a daily basis and upon the completion of any works

Lead Maintenance Engineer (HVAC & Purified Water Systems)

Our Engineers support internal and external manufacturing operations remain operational, continuously improve, and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

Lead Maintenance Engineer (HVAC and purified water system)

In this role, you will:

• Act as Subject Matter Expert (SME) in IPT Maintenance team with in-depth knowledge in Purified water system, HVAC, and Electrical & Instrumentation.
• You will take ownership for the HVAC and purified water system day to day support and continues improvement.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Lead Quality Risk assessment and develop a yearly trend for purified water system and HVAC system.
• Develop and implement maintenance program, preventive maintenance procedures and spare parts strategy for safe, reliable, and efficient operation of the systems/Equipment’s.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using our Production System.

Key Responsibilities:

Safety & compliance

• Lead or support investigation, participate in trouble shooting and root cause analysis for various operational events, and ensure that all relevant engineering CAPA are completed within agreed timeline.
• Provide support and actively participate in the site expansion project related to the HVAC and water systems, ensuring compliance with the company’s requirements.
• Lead and manage change control on project activities or act as technical advisor for system modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget, and qualification of facilities in accordance with site to approved procedures.
• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.
• Develop commissioning, qualification (IQ, OQ) activities are executed accordingly and in compliance.
• Maintain HVAC and Purified water systems are in optimum condition in compliance with Good Manufacturing Practice (GMP) & EHS requirements.
• Lead/participate in equipment failure troubleshooting and deviation investigations whenever required.
• Provide input during Basis of Design (BOD) and Detailed Design during large capital projects, applying good maintenance and reliability engineering principles whenever required.

Enhance and uphold maintenance quality.

• Implements technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies)
• Supports Maintenance Lead to meet Profit Plan targets, optimize maintenance and product standard cost effectiveness in accordance with cGMP and Safety guidelines.
• Responsible for improving the reliability of equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.
• Lead and perform Root Cause Analysis (RCA) for surfaced issues and implement a robust solution.

Operations excellence

• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program and also ensures that the work is done in accordance with schedule and specification.
• Regularly review and revise maintenance program and procedures to increase equipment reliability, reduce waste and improve overall asset care process & cost efficiency.
• Work with Engineering & Safety, Health & Environment (SHE) to execute a 'reliability-centric’ maintenance plan.
• Share best practices and lessons learned with the objective of improving asset utilization.
• Undertake activities to support realization of production, maintenance and product cost effectiveness with emphasis on equipment reliability and maintenance expenses.
• Conducts Maintenance effectiveness / optimization reviews along with IPT maintenance leads/Engineers/Technicians.

Continuous Improvements (CI)

• Utilize Lean methodologies such as 5S, Standard Work, real-time problem solving (RTPS), to support execution of continuous improvement activities.
• Support the development of continuous improvement framework and work with the Maintenance team to identify opportunities.
• Compile and review data and develops action plans for critical HVAC systems and Purified water systems to improve reliability and reduce M&R cost.
• Identify water and HVAC system repair and replacement projects, plan and develop schedules, acquire materials, prepare budgets, and develop an RFC for job execution.
• Effective project management ensures that jobs are completed on time, within budget,

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 5 to 8 years of maintenance work experience in Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Analytical and Problems solving skill with regard to Purified water system and HVAC Systems
• Knowledge in HVAC and Purified water system operation and Maintenance principle.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Knowledge of various clean room standards across the Pharmaceutical Manufacturing Industry will be an added advantage.
• Familiar with Life cycle of the HVAC system (from design, operations, controls monitoring, maintenance and obsolescence management).
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Demonstrated use of Reliability analysis tools such as FME, RCFA, etc.

Professional Competencies

• Resilient and resourceful
• Good oral/written communication and interpersonal skills
• Continuous learning mindset
• Foster team collaboration
• Strong work ethics

1) Full Set of Accounts Management:

- Responsible to manage and maintain the full set of accounts.

- Ensure accurate and timely recording of financial transactions.

- Support monthly, quarterly, and annual financial statements and reports.1

2) Accounts Payable and Receivable:

- Handle all aspects of accounts payable and receivable.

- Perform bank reconciliations and monitor cash flow.

- Handling and developing improvement processes in overall General Ledger account including managing subledger of AR, AP, and Inventory account, Intercompany transaction, account revaluation and depreciation.

- Update the receipt entries in the accounting system on daily basis

- Manage accounts payable and receivable functions, including invoice processing and follow up to the clients with regards the outstanding AR in timely manner.

3) General Ledger Maintenance:

- Maintain and reconcile general ledger accounts.

- Ensure compliance with accounting standards and regulations.

- Prepare and post journal entries as required.

4) Financial Reporting and Analysis:

- Assist in the preparation of budgets and forecasts.

- Conduct financial analysis to support business decisions.

- Prepare ad-hoc financial reports as needed.

5) Compliance and Audit:

- Ensure compliance with local tax, GST regulations and filing requirements.

- Ensure quarterly GST submission is accurate and submitted on timely basis

- Assist with internal and external audits.

- Maintain accurate and organized financial records.

6) Human Resources Functions:

- Support monthly payroll and incentive calculations.

- Process staff claims and reimbursements.

- Maintain and organise personnel records and filing.

JOB REQUIREMENTS:

• Bachelor’s degree in Accountancy/Finance strongly preferred.
• Minimum 3 years of full set accounting experience.
• Meticulous and organized.
• Proactive and independent
• Possess excellent communication and interpersonal skills
• CPA/ACCA/CA or equivalent is a plus point
• Strong technical skills and ability to work in a fast-paced environment, having good oral and written communication skills and be analytical, independent, and proactive
• Experience with Xero and Quickbooks is a plus

• At least 2 Years of working experience in the related field is required for this position.
• Required Skill(s): Microsoft Office

· Preferably Non-Executive specialized in Clerical/Administrative Support or equivalent.

• Proficient in Microsoft Excel and PowerPoint
• Prepare quotation, issue delivery order and Invoice
• Lead and manage full spectrum of HR functions including strategic Human resource development, Recruitment & Selection, Compensation & Benefits, Learning & Development, process and compliance, handle of Grievances and Exit procedures.
• Develop and execute recruitment strategies to support company business growth
• Prepares employees for assignments by establishing and conducting orientation and training programs.
• Responsible for planning & implementation of HR projects or initiatives in accordance with company’s values.
• Good knowledge in construction sectors Labour Law & Regulation
• Conduct interviews and on-boarding process for new hirer/staff.
• Initiate plans and activities for cohesive working environment
• Administering and managing human resources plans for departments. Retains historical human resource records by designing a filing and retrieval system and keeping records in compliance with personal data protection.
• Advances human resource staff job results by counselling and disciplining employees, and planning, monitoring, and appraising job results
• General office administration and business support.
• Lead, organise, maintain, and develop HR policies.
• Preparation of HR reports to management
• Full Payroll
• Handle company worker’s accommodation such as dormitory rental contract, check in & out and all related matters.
• Take care of worker welfare such as food catering, attend to worker enquiry etc.
• Assist in Work Permit application and related matters.
• General administrative duties such as photocopying, scanning, faxing and filling etc
• Assist in purchasing, insurance, invoice verification, letter preparation
• Government license application and renewal
• ISO certification
• Ad-hoc duties assigned by Manager

Job Responsibilities :

• Handle emails and record on Data entry accordingly
• Support the sales team on day-to-day administration and quotation preparation
• Liaise with employees of other departments to resolve issues
• Handle and coordinate incoming items & help to sort them out & do labels to the requestor
• Maintenance of database. Documentation, filing work
• Provide basic administrative support to the other department
• Other ad hoc duties as required

Required Skill(s):

• Good IT skill & internet savvy, Good command of English, Knowledge of SAP preferred
• 1-2 years relevant experience
• Preferably Chinese speaking (required to liaise with chinese speaking customers)
• Good communication & interpersonal skills to communicate with all levels of staff (operations and executive).
• Good knowledge of construction MOM guidelines and Employment Laws.
• Familiar with MOM portal and HR various e-services
• Strong administrative skills, able to work independently, multi-tasks
• Minimum 3 years of HR experience in Construction industry.
• Minimum Diploma in Human Resource or Business Management
• Work Days : Monday to Friday , Alternate Saturday (Half Day)
• With similar working experience in Construction sector will be advantage. Those without working experience may consider.
• Responsible, meticulous, multi-tasker, self-initiative, resourceful, good team player
• Good in Microsoft Office, especially Excel
• Working location: Jurong West
• Fast paced working environment
• Willing to work in a construction service environment.

JOB DESCRIPTIONS:

• Carry out routine inspection and maintenance on company’s construction equipment
• Dismantles defective equipment and install new or repaired mechanical and electrical parts
• Handles & follows up on equipment issues such as repair & maintenance of electrical and mechanical equipment
• Carrying out mechanical and electrical maintenance, repairing and servicing tasks
• Supervise installation / renovation / replacement works on facilities and equipment which are carried out by vendors / contractors and ensures all works are carried out appropriately
• Troubleshoot and perform minor repairs on M&E services & installation for the building, which includes but not limited to general handyman work in fitting, installation, electrical wiring, plumbing, painter, carpentry and etc.
• Install, test, and commission mechanical and electrical systems and equipment, including heating, ventilation, air conditioning (HVAC), plumbing, electrical wiring, and other critical systems.
• Liaise & supervise the appointed contractors / Term Contractor for any maintenance, repairs and / or renovation works and to ensure standard of work is performed
• Communicate effectively with clients, supervisors, or contractors regarding system status, repairs, and timelines.
• Support foreman / manager in supervision of night site works, ensuring that safety regulations are adhered to when carrying out maintenance works
• Co-ordinate job site activities to consistently meet timeline, customer / client job requirements, SOPs, and statutory regulations
• Carry out any other duties or instructions assigned by the Management

JOB REQUIREMENTS:

• N/O Level/ Higher /Nitec/ Diploma
• Preferably with atleast 5 years of relevant experience in a similar capacity
• Required to work hands-on and in Non-Aircon environment
• Able to be on standby after office hours for any technical / electrical works default.
• Possess knowledge of cable & wiring, AC/ DC drives & inverter motors
• Candidates must have class 3 driving licence. Need to travel from time to time for business needs.
• Able to interpret blueprints, technical drawings and sketches to calculate requirements
• Knowledge on mechanical, electrical and building system, including using of hand and electrical tools
• Regularly inspect and monitor mechanical and electrical systems to detect any performance issues or wear.
• Must be able to read technical manuals and drawings
• Must be able to meet the physical requirements of the job which include bending, lifting heavy equipment and working in confined spaces
• Ability to work in physically demanding conditions and handle equipment with precision.
• Must be able to work shifts, weekends and public holiday when necessary
• Able to manage multiple projects within the scope of work and stay on task
• Able to work well under pressure with minimal supervision

Responsibilities:

· Provide timely IT support to all company users, and when necessary, liaise with vendors for support.

· Leveraging technologies to help in improving the organization's efficiencies and productivity.

· Ability to troubleshoot network, hardware, and software problems.

· Company Windows server maintenance.

· Responding in a timely manner to service issues and requests.

Requirements

· Minimum 1-2 years relevant experience in IT infrastructure.

· Knowledge in TCP/IP, DHCP, Windows systems, and Windows Server.

· It would be better if there's understanding about smart factory settings such as IoT, MQTT, etc.

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

About the role

To support R&D department in conducting laboratory tests, sample preparation and executing technical and quality control documentation/testing while co-ordinating with various departments to ensure smooth running of the organisation.

Roles & Responsibilities

Sample Preparation

• Receive and label all raw materials brought into the lab for accountability.
• Maintain inventory of chemicals.
• Prepare materials for experiment and assist R&D activities..
• Assist R&D Engineer to conduct experiments and operate equipment.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• 
  

Measurement & Calibration

• Perform periodic calibration of equipment and reporting of any malfunctions.
• Assist in troubleshooting and maintenance of all testing equipment.
• Ensure proper housekeeping of laboratory on a daily basis.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Perform Laboratory Data Analysis and Reporting

• Recording and reporting of experimental results and trends.

Quality Control

• Perform in process quality check and physical test on in-process materials & finished products
• Testing of properties of aerogel products and co-ordinating with 3rd party laboratories.
• Prepare QC documents for all batches in production department

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Assist workplace safety initiatives.
• Implement and manage waste disposal and coordinate with chemical disposal companies.

Requirements

• ITE / Diploma in Chemical Engineering, Chemistry, Biotech, Lifesciences and Pharma etc.
• Years of work experience: At least 1 - 3 years.
• Training will be provided.
• Knowledge of safe handling of chemicals
• Possess basic computer skills and Microsoft Office applications.
• Team player and able to work independently

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Qua_Ctrl in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, details of your educational background and work experience.

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

Job Description:

• Responsible for carrying out field duties according to the Standard Operating Procedures (SOPs) and / or Operation Supervisor’s instructions.
• Perform unit start-up, shutdown and plant turnaround activities according to the Standard Operating Procedures (SOPs).
• Perform planned rounds (Field / DCS) and take corrective action to maintain equipment and plant operations within safe operating limits and product quality compliance.
• Monitor unit performance to ensure safe and optimal operation of the plant equipment, pipeline distribution network and other facilities.
• Prepare process equipment for maintenance service, this includes line purging, LOTO.
• Take part in operating procedures development and prepare job pack documentation for equipment repair.
• Perform troubleshooting, resolve field operational issues and provide support for engineering, operation and maintenance teams.
• Execute according to production schedules and achieve operation targets in a cost-effective manner.
• Perform any other tasks which may be assigned to him by Ops Supervisor or Ops Manager.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Minimum GCE ‘N’ Level certification with 3 – 5 years of relevant work experience.
• Candidates without any relevant experience will be considered as training will be provided.
• Experience in ISO-tanker unloading, incineration and water treatment operations will be added advantages.
• Candidate with a forklift licence is a plus point.
• Must be prepared to work rotating shifts, weekends and Public Holidays.
• An effective team player with good communication skills.

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

Our culture believes in Powering Your Potential . We provide global opportunities to develop your career, make your community a better place and work with today’s most innovative thinkers to solve the world’s toughest problems.

We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That’s what #LifeAtCummins is all about.

We are looking for a talented Lead Technician - Mechanical to join our team based in Tuas, Singapore. This is an Onsite role reporting to the Service operation Manager. This role will also require travelling within Singapore. Reporting to the Service Supervisor, this role provides support for all Cummins products, primarily in Automotive, Industrial and Marine applications, in a combination of workshop and field work. You will respond to engine breakdowns and provide technical analysis of failure, warranty support and troubleshooting engineering issues. Previous experience in a similar Service role, and knowledge of High-Speed Diesel engines, is essential.

This position offers a long-term career with a global organisation in the power industry and could be the next step in your successful Service career.

In this role, you will make an impact in the following ways:

Responsibilities:

• Establishes and continually develops productive customer relations and ensures prompt and efficient attention to customer needs.
• Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete complex repairs at customer site.
• Performs preventative maintenance activities as per documented schedules and standards on engines and related components in the field.
• Escalates unresolved issues to product specialists or supervisor.
• Coaches and develops technicians and/or apprentices and transfers knowledge and experience to others; may provide work direction; may review repair plans, parts lists, etc.
• Completes required documentation, such as service worksheets, timesheets, warranty claims, quality documents via handwritten forms or business system input screens.
• Identifies additional sales and service opportunities with customer. Completes training in line with skill and business requirements.
• Maintains service vehicle and tools for cleanliness and proper operation.
• Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation and reports any issues / incidents to site management and to their supervisor.

RESPONSIBILITIES

To be successful in this role you will need the following:

• Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
• Customer focus - Building strong customer relationships and delivering customer-centric solutions.
• Develops talent - Developing people to meet both their career goals and the organization’s goals.
• Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.
• Manages conflict - Handling conflict situations effectively, with a minimum of noise.
• Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
• Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
• Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
• Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
• Engine Systems Interactions - Interprets and analyzes the interactions of internal and external electrical and mechanical systems (exhaust, heating, cooling, fuel systems, driveline, aftertreatment, controls, sensors, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair.
• Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
• Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
• Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
• Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

QUALIFICATIONS

Education, Licenses, Certifications:

• Trained Engine Technician (Preferred)
• Vocational diploma from relevant technical institution
• Locally valid driving permit, Class 3 and above This position may require licensing for compliance with export controls or sanctions regulations.

Experience:

• Significant field service work experience
• Expert level knowledge of and/or experience with engine products
• Customer service experience
• Experience providing technical advice and coaching to more junior technicians (preferred)
• Able to write and speak in English language
• Preferably with experience in internal combustion engines
• Experience in Marine environment will be advantageous
• No cross-border relocation provided.
• Team leading experience, 3+ years required.

Description

▶️ Training provided, aircon environment
▶️ Bi-weekly pay available (every 7th and 22nd)
▶️ Min 3 months, extendable or convertible based on performance

Company Overview

Atera Water is a Singaporean water technology start-up, specialising in providing filtration membrane solutions for water and wastewater treatment. The company specialize in economically viable and environmentally friendly filtration technologies, designed to empower communities to tackle water challenges amidst climate change and high costs of advanced filtration membranes.

The company is scaling up our membrane production for pilot and commercial projects in SEA region. We are looking for full-time technician to support the manufacturing of membrane products.

Responsibilities

1. To support membrane manufacturing activities, which includes fibre spinning, looping, stretching and treatment process.

2. To assist in managing inventory of raw materials, components, and finished products

3. To maintain proper records of each batch of newly manufactured products and ensure proper labelling and documentation.

4. To assist in preventive maintenance, checking, inspection and troubleshooting of manufacturing equipment.

5. To ensure that membrane products are manufactured with appropriate quality and on schedule with project or customer requirement.

6. To comply with standards, regulations and safe work practices.

7. To provide supporting duties for product testing, when required.

Requirements

· Minimum Higher NITEC/Professional Certificate in Engineering or Manufacturing or equivalent

· Diploma without experience is welcome to apply and willing to be trained

· Experience in polymer processing and extrusion processes would be an advantage

· Possess a positive attitude and sense of urgency

· Meticulous, keen attention to details and organized.

· Team player and able to work independently

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Perform hands-on mechanical/electrical assembly tasks within the standard time
• Ensure that the assembled machine is according to Makino's quality standards
• Responsible for keying the operation time into EES for performance measurement
• Responsible for housekeeping and ensuring that the assigned machine area is clean and tidy
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job requirements:

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• Experience working in Assembly/Production is an added advantage
• Able to work shifts and commit to overtime on weekdays and weekends when required
• Able to handle physical work and stand for long hours
• Able to read and interpret drawings
• Have the initiative to learn and produce quality outcome
• Responsible and committed to the assigned task
• Team player and able to work independently