Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

Job Description:

• Responsible for carrying out field duties according to the Standard Operating Procedures (SOPs) and / or Operation Supervisor’s instructions.
• Perform unit start-up, shutdown and plant turnaround activities according to the Standard Operating Procedures (SOPs).
• Perform planned rounds (Field / DCS) and take corrective action to maintain equipment and plant operations within safe operating limits and product quality compliance.
• Monitor unit performance to ensure safe and optimal operation of the plant equipment, pipeline distribution network and other facilities.
• Prepare process equipment for maintenance service, this includes line purging, LOTO.
• Take part in operating procedures development and prepare job pack documentation for equipment repair.
• Perform troubleshooting, resolve field operational issues and provide support for engineering, operation and maintenance teams.
• Execute according to production schedules and achieve operation targets in a cost-effective manner.
• Perform any other tasks which may be assigned to him by Ops Supervisor or Ops Manager.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Minimum GCE ‘N’ Level certification with 3 – 5 years of relevant work experience.
• Candidates without any relevant experience will be considered as training will be provided.
• Experience in ISO-tanker unloading, incineration and water treatment operations will be added advantages.
• Candidate with a forklift licence is a plus point.
• Must be prepared to work rotating shifts, weekends and Public Holidays.
• An effective team player with good communication skills.

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.
• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.
• Perform and maintain the documentation of operations in accordance with cGMP requirement.
• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.
• Perform online monitoring of in process parameters / checks throughout the batch.
• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.
• Perform all activities in accordance with cGMP.
• Maintain the cleanliness of work area to ensure cGMP compliance.
• Perform all other relevant duties required to meet the schedule.
• Check relevant material and product details against batch document
• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.
• Involve in equipment / process qualification.
• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.
• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.
• Experience in tablet coating of oral solid dosage manufacturing is preferred.
• A good team player with positive learning attitude.
• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology /Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines
• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.
• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Company Overview

Atera Water is a Singaporean water technology start-up, specialising in providing filtration membrane solutions for water and wastewater treatment. The company specialize in economically viable and environmentally friendly filtration technologies, designed to empower communities to tackle water challenges amidst climate change and high costs of advanced filtration membranes.

The company is scaling up our membrane production for pilot and commercial projects in SEA region. We are looking for full-time technician to support the manufacturing of membrane products.

Responsibilities

1. To support membrane manufacturing activities, which includes fibre spinning, looping, stretching and treatment process.

2. To assist in managing inventory of raw materials, components, and finished products

3. To maintain proper records of each batch of newly manufactured products and ensure proper labelling and documentation.

4. To assist in preventive maintenance, checking, inspection and troubleshooting of manufacturing equipment.

5. To ensure that membrane products are manufactured with appropriate quality and on schedule with project or customer requirement.

6. To comply with standards, regulations and safe work practices.

7. To provide supporting duties for product testing, when required.

Requirements

· Minimum Higher NITEC/Professional Certificate in Engineering or Manufacturing or equivalent

· Diploma without experience is welcome to apply and willing to be trained

· Experience in polymer processing and extrusion processes would be an advantage

· Possess a positive attitude and sense of urgency

· Meticulous, keen attention to details and organized.

· Team player and able to work independently

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Perform hands-on mechanical/electrical assembly tasks within the standard time
• Ensure that the assembled machine is according to Makino's quality standards
• Responsible for keying the operation time into EES for performance measurement
• Responsible for housekeeping and ensuring that the assigned machine area is clean and tidy
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job requirements:

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• Experience working in Assembly/Production is an added advantage
• Able to work shifts and commit to overtime on weekdays and weekends when required
• Able to handle physical work and stand for long hours
• Able to read and interpret drawings
• Have the initiative to learn and produce quality outcome
• Responsible and committed to the assigned task
• Team player and able to work independently

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

Job Description:

• Possess the skills to inspect, diagnose, repair, and maintain trucks
• 检查及维修卡车
• General troubleshooting of vehicle according to complain
• 跟据顾客要求检查及解决汽车故障
• Ability to pinpoint parts to be purchased and understand the part list
• 清楚的指出须要更换的零件
• Maintain proper service records on job done and read job orders
• 记录汽车维修及读工作单
• Perform diagnostics and repairs on trucks (mechanical, electrical, and electronic & aircon system replacement).
• 对卡车进行诊断和维修（机械、电气和电子,空调维修）。
• Overhaul power steering, engines, ESCOT gearboxes, rear axles, and emission systems.
• 检修动力转向系统、发动机、ESCOT 变速箱、后轴和排放系统。

Job Qualification (Skills & Requirements):

• Minimum 3 years’ experience 至少3年经验
• Able to understand basic English基本英文
• Able to multitask, prioritize and manage repair job efficiently
• 能够高效地执行多任务、确定优先级并管理维修工作
• Detail-oriented with a strong commitment to providing high-quality work
• 注重细节，坚定致力于提供高质量的工作
• Ability to work both independently and as part of a team 能够独立工作和团队合作
• Physical capability to lift up to 20kg and perform tasks associated with automotive repair
• 具备举起 20 公斤重物并执行与汽车维修相关的任务的身体能力
• At least a Professional Certificate/Nitec in Automotive Technology or a former NTC 2/3 in Motor Vehicle Mechanics.
• 至少拥有汽车技术专业证书/Nitec 或机动车机械师前 NTC 2/3

Responsibilities:

· Provide timely IT support to all company users, and when necessary, liaise with vendors for support.

· Leveraging technologies to help in improving the organization's efficiencies and productivity.

· Ability to troubleshoot network, hardware, and software problems.

· Company Windows server maintenance.

· Responding in a timely manner to service issues and requests.

Requirements

· Minimum 1-2 years relevant experience in IT infrastructure.

· Knowledge in TCP/IP, DHCP, Windows systems, and Windows Server.

· It would be better if there's understanding about smart factory settings such as IoT, MQTT, etc.

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Job Description:

• Prepare and operate CNC machine tools to perform drilling, milling and other tasks.
• Able to understand the specifications and expected results of the task at hand by reading design drawings, mechanical drawings, etc.
• Translate instructions into computational commands so that the machine can perform the correct function.
• To supervise and monitor when the machine is performing task and able to make necessary adjustments to produce better results.
• Have experience in operatingt a milling machine.

Skills:

• Know Mastercam CNC machining programming software system/G-code.
• Able to read and understand mechanical documents and drawings, such as 2D/3D.
• Must have a basic understanding of computer programming.

Requirements:

• Qualification: ITE/NITEC
• Minimum 2 years of relevant experience
• Bilingual in English and Chinese

About the role

To support R&D department in conducting laboratory tests, sample preparation and executing technical and quality control documentation/testing while co-ordinating with various departments to ensure smooth running of the organisation.

Roles & Responsibilities

Sample Preparation

• Receive and label all raw materials brought into the lab for accountability.
• Maintain inventory of chemicals.
• Prepare materials for experiment and assist R&D activities..
• Assist R&D Engineer to conduct experiments and operate equipment.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• 
  

Measurement & Calibration

• Perform periodic calibration of equipment and reporting of any malfunctions.
• Assist in troubleshooting and maintenance of all testing equipment.
• Ensure proper housekeeping of laboratory on a daily basis.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Perform Laboratory Data Analysis and Reporting

• Recording and reporting of experimental results and trends.

Quality Control

• Perform in process quality check and physical test on in-process materials & finished products
• Testing of properties of aerogel products and co-ordinating with 3rd party laboratories.
• Prepare QC documents for all batches in production department

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Assist workplace safety initiatives.
• Implement and manage waste disposal and coordinate with chemical disposal companies.

Requirements

• ITE / Diploma in Chemical Engineering, Chemistry, Biotech, Lifesciences and Pharma etc.
• Years of work experience: At least 1 - 3 years.
• Training will be provided.
• Knowledge of safe handling of chemicals
• Possess basic computer skills and Microsoft Office applications.
• Team player and able to work independently

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Qua_Ctrl in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, details of your educational background and work experience.

Key Roles and Responsibilities

• To troubleshoot and maintain/service security systems at clients’ premises
• Attend to fault calls during office hours and standby duties after office hours in rotating duty roster
• Liaise closely with client representatives on all service/maintenance related issues.
• Manage day-to-day client interactions and expectations for optimal results..
• Familiarize yourself and deliver customer satisfaction base on each client’s business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required

Requirements

• Min Higher Nitec & Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 2 years working experience.
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.
• Knowledge in IT/Network/Server is an added advantage.
• Good interpersonal and problem solving skills.
• Independent, self-motivated individual whom is able to work under minimum supervision.
• Required to perform standby duties
• Driving License – Preferably if candidate possess own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road
• 5.5 work day

Lead Maintenance Engineer (HVAC & Purified Water Systems)

Our Engineers support internal and external manufacturing operations remain operational, continuously improve, and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

Lead Maintenance Engineer (HVAC and purified water system)

In this role, you will:

• Act as Subject Matter Expert (SME) in IPT Maintenance team with in-depth knowledge in Purified water system, HVAC, and Electrical & Instrumentation.
• You will take ownership for the HVAC and purified water system day to day support and continues improvement.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Lead Quality Risk assessment and develop a yearly trend for purified water system and HVAC system.
• Develop and implement maintenance program, preventive maintenance procedures and spare parts strategy for safe, reliable, and efficient operation of the systems/Equipment’s.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using our Production System.

Key Responsibilities:

Safety & compliance

• Lead or support investigation, participate in trouble shooting and root cause analysis for various operational events, and ensure that all relevant engineering CAPA are completed within agreed timeline.
• Provide support and actively participate in the site expansion project related to the HVAC and water systems, ensuring compliance with the company’s requirements.
• Lead and manage change control on project activities or act as technical advisor for system modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget, and qualification of facilities in accordance with site to approved procedures.
• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.
• Develop commissioning, qualification (IQ, OQ) activities are executed accordingly and in compliance.
• Maintain HVAC and Purified water systems are in optimum condition in compliance with Good Manufacturing Practice (GMP) & EHS requirements.
• Lead/participate in equipment failure troubleshooting and deviation investigations whenever required.
• Provide input during Basis of Design (BOD) and Detailed Design during large capital projects, applying good maintenance and reliability engineering principles whenever required.

Enhance and uphold maintenance quality.

• Implements technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies)
• Supports Maintenance Lead to meet Profit Plan targets, optimize maintenance and product standard cost effectiveness in accordance with cGMP and Safety guidelines.
• Responsible for improving the reliability of equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.
• Lead and perform Root Cause Analysis (RCA) for surfaced issues and implement a robust solution.

Operations excellence

• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program and also ensures that the work is done in accordance with schedule and specification.
• Regularly review and revise maintenance program and procedures to increase equipment reliability, reduce waste and improve overall asset care process & cost efficiency.
• Work with Engineering & Safety, Health & Environment (SHE) to execute a 'reliability-centric’ maintenance plan.
• Share best practices and lessons learned with the objective of improving asset utilization.
• Undertake activities to support realization of production, maintenance and product cost effectiveness with emphasis on equipment reliability and maintenance expenses.
• Conducts Maintenance effectiveness / optimization reviews along with IPT maintenance leads/Engineers/Technicians.

Continuous Improvements (CI)

• Utilize Lean methodologies such as 5S, Standard Work, real-time problem solving (RTPS), to support execution of continuous improvement activities.
• Support the development of continuous improvement framework and work with the Maintenance team to identify opportunities.
• Compile and review data and develops action plans for critical HVAC systems and Purified water systems to improve reliability and reduce M&R cost.
• Identify water and HVAC system repair and replacement projects, plan and develop schedules, acquire materials, prepare budgets, and develop an RFC for job execution.
• Effective project management ensures that jobs are completed on time, within budget,

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 5 to 8 years of maintenance work experience in Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Analytical and Problems solving skill with regard to Purified water system and HVAC Systems
• Knowledge in HVAC and Purified water system operation and Maintenance principle.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Knowledge of various clean room standards across the Pharmaceutical Manufacturing Industry will be an added advantage.
• Familiar with Life cycle of the HVAC system (from design, operations, controls monitoring, maintenance and obsolescence management).
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Demonstrated use of Reliability analysis tools such as FME, RCFA, etc.

Professional Competencies

• Resilient and resourceful
• Good oral/written communication and interpersonal skills
• Continuous learning mindset
• Foster team collaboration
• Strong work ethics

Help us get ahead of disease together with our Vaccines MSAT (Manufacturing Science & Technology) team.

Education required: Diploma in Biotechnology or another relevant field.

Language requirement: Written and spoken fluency in English
Application deadline: We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

Looking to gain valuable real world work experience and help positively impact the health of billions of people? Apply for a GSK Traineeship today!

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

A certificate will be given to successful trainees upon completion of the programme.

What will you do?

The MSAT process science technician’s role is to support the scientists in various process development and process evaluation studies via various tasks such as inventory management, buffer preparation, trial execution and sample management.

• Management of MSAT Process Science facility
• Support qualification of MSAT Process Science equipment
• Support process development / evaluation trials
• Sample management
• Support Environment. Health, Safety and Wellness initiatives

What will you learn?

• Develop strong scientific understanding for process development of various vaccines portfolio.
• Master important skills for laboratory management such as inventory and sample management
• Run process development trials independently and interpret trial outcomes

What are we looking for?

• Diploma in Biotechnology or another relevant field preferred.
• Relevant experience in the bio/pharmaceutical industry in Production, Process Development, Quality Control, R&D or MSAT is a plus.
• At least 2 years' experience in bio/pharmaceutical industry.
• Good knowledge of safety and environment regulations. Good communication skills.
• Good documentation skills.
• Good command of English (verbal and written).

What do we offer you?

• Understand and experience the GSK Culture
• Work with a diversified team of professionals.
• Implement technical knowledge and skills that you have acquired at school
• Apply and develop soft skills such as interpersonal, communications and negotiation skills
• Transport to and from site to MRT stations in centralised locations all across Singapore (only for manufacturing sites)

Sevenseas Electronic is a marine electronics company established in Shanghai, China since 1996 and registered our local companies/stations located in Qingdao, XinGang ,Dalian, Yantai, ZhouShan , FuZhou & GuangZhou ports & Singapore with more than 40 owned, trained & experienced technicians to provide on time & cost-effective service in China and Singapore ports.

Our company is combined by three parts including Radio/Navigation, Automation & IT Solution.

We are looking for a dedicated Service Technician/ Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing of navigation and communications equipment on shipping vessels.

Responsibilities/Requisite :-

1. Attending ships in terminal, anchorage, shipyard for repair, installation, troubleshooting services.

2. Report and documentation as per company procedures (E.g. Update of Software, database, etc.).

3. Timely completion of technical and service work report

4. Conducting fault-finding process and resolve the technical issue onboard as appropriate.

5. Providing technical support both onsite and remotely for company product to the customer.

6. Providing support to coordinators.

7. Ensuring that the work is executed according to Company Quality, Health, Safety and Environmental guidelines and customer site procedures.

8. Ad-hoc duties as assigned by manager.

9. Able to travel overseas.

Requirements

• O-Level/ITE in Electronics Engineering
• Newly graduates are welcome

Alternatively, you may wish to email your resume in a detailed Word format to [email protected].

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Ensure safe and optimal operation of process units
• Ensure workplace safety by proper asset upkeep, supporting function testing on safeguarding system and proper control on work activities in the plant
• Participate in plant shutdown & start-up and process unit troubleshooting work activities

• Diploma or NITEC in Chemical Process Technology (Petrochemicals or Pharmaceuticals) OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE / Polytechnic engineering graduates are welcome to apply as training will be provided

he Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

We are looking to provide a learning opportunity for individuals delivering timely, sustainable output for Technical Services Team. The trainee will work under supervision of the Technical Services - Utilities & HVAC Systems team, Understanding and collaborate with other functions of Technical Services team in the company to provide appropriate and timely output.

Key Responsibilities:

You will be required to:

• Perform daily operation and maintenance of Utility plant and utilities services.
• Provide reliable plant utilities services of heating, cooling, steam and air by involving in operation and maintenance activities on plant facilities and utility systems.
• Determine work priorities, scheduling repair / maintenance of equipment for plant facilities and utilities services.
• Implement and Improve preventive maintenance programs by reviewing operations, quality control and maintenance reports and statistics with operational standards / cGMP for plant facilities and utilities services.
• Contribute to continuous improvement by providing recommendation and initiative to promote sustainability.
• Actively seek improvements to systems and processes through continuous improvement, streamlining and simplification.
• Provide support to new changes to systems and commissioning activities.
• To be able to assess and manage spare parts for Utilities Systems.
• Involve in problem solving sessions to identify the root cause of system issues.
• Participate in qualification of gmp areas (cleanrooms).

You will be able to learn :

• Process Design Learning of Utilities Systems.
• HVAC - Heating Ventilation and Air Conditioning,
• Clean Utilities (Compressed Gases, Purified Water, Water for Injection & Pure Steam Systems) and
• Black Utilities Systems (Chillers, Boiler, Air Compressors, Neutralization package).
• Spare Part Management & Maintenance Work Order Portfolio in SAP.
• Continuous Improvement frame work.

Skills:

Business Skills and Competencies

• Educational background –Mechanical / Chemical Engineering (Diploma)
• Proficient in use of IT and software/systems, ideally document management and database systems

Behavioural Skills and Competencies

• Strong written and oral communication skills
• Flexible with self-reliance to work in an empowered environment
• Awareness and ability to work within culturally diverse teams
• Demonstrated ability to take initiative, think and work independently, and problem-solve
• Strong drive for performance and attention to details
• A keen interest to learn and a passion for knowledge enhancement

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 - S$50,000)

Perform and ensure safe and efficient day-to-day operations of oil movement area so that movement and blending of products are in accordance with specification.

• Diploma or NITEC in any Engineering/Science discipline OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE/Polytechnic engineering graduates are welcome to apply as training will be provided

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Looking to gain valuable real world work experience and help positively impact the health of billions of people? Apply for a GSK Traineeship today!

This offers you the opportunity to kickstart your career – to take on a real role with genuine impact! You’ll take on challenging, serious work on live projects or assignments. You’ll also get to learn from us, develop your skills and gain valuable experience for wherever the future takes you.

What will you do?

• Receipt of materials/chemicals from central warehouse, store and issue to production on timely manner.
• Performing SAP transactions in alignment with physical movement of goods.
• Ensure adherence to GMP requirement such as sanitization of materials, cleaning of classified and non-classified area.
• Receive, handling and management of process waste.
• Timely review temperature graphs from temperature sensors (PEMS and AMS)
• Maintain inventory accuracy and proper documentation (cycle count).

What will you learn?

• cGMP requirement in Biopharma manufacturing environment.
• Zone classification and requirements (cleaning and gowning).
• Inventory management (Kanban and SAP).
• Coordination between requestor, warehouse, and material planner (if shortage of materials)
• Exposure to Biopharma production materials and handling manner (material sanitization method)

What are we looking for?

• Curious, willing to learn and adaptable to changes.
• A lively interest in biopharma industry.
• Good interpersonal skills
• Disciplined and work with integrity.

What do we offer you?

• Working hours: 0800 to 1700, Monday to Friday.
• Subsidized cafeteria service.
• Comprehensive network of company transport serving multiple MRT stations

JOB DESCRIPTIONS:

• Carry out routine inspection and maintenance on company’s construction equipment
• Dismantles defective equipment and install new or repaired mechanical and electrical parts
• Handles & follows up on equipment issues such as repair & maintenance of electrical and mechanical equipment
• Carrying out mechanical and electrical maintenance, repairing and servicing tasks
• Supervise installation / renovation / replacement works on facilities and equipment which are carried out by vendors / contractors and ensures all works are carried out appropriately
• Troubleshoot and perform minor repairs on M&E services & installation for the building, which includes but not limited to general handyman work in fitting, installation, electrical wiring, plumbing, painter, carpentry and etc.
• Install, test, and commission mechanical and electrical systems and equipment, including heating, ventilation, air conditioning (HVAC), plumbing, electrical wiring, and other critical systems.
• Liaise & supervise the appointed contractors / Term Contractor for any maintenance, repairs and / or renovation works and to ensure standard of work is performed
• Communicate effectively with clients, supervisors, or contractors regarding system status, repairs, and timelines.
• Support foreman / manager in supervision of night site works, ensuring that safety regulations are adhered to when carrying out maintenance works
• Co-ordinate job site activities to consistently meet timeline, customer / client job requirements, SOPs, and statutory regulations
• Carry out any other duties or instructions assigned by the Management

JOB REQUIREMENTS:

• N/O Level/ Higher /Nitec/ Diploma
• Preferably with atleast 5 years of relevant experience in a similar capacity
• Required to work hands-on and in Non-Aircon environment
• Able to be on standby after office hours for any technical / electrical works default.
• Possess knowledge of cable & wiring, AC/ DC drives & inverter motors
• Candidates must have class 3 driving licence. Need to travel from time to time for business needs.
• Able to interpret blueprints, technical drawings and sketches to calculate requirements
• Knowledge on mechanical, electrical and building system, including using of hand and electrical tools
• Regularly inspect and monitor mechanical and electrical systems to detect any performance issues or wear.
• Must be able to read technical manuals and drawings
• Must be able to meet the physical requirements of the job which include bending, lifting heavy equipment and working in confined spaces
• Ability to work in physically demanding conditions and handle equipment with precision.
• Must be able to work shifts, weekends and public holiday when necessary
• Able to manage multiple projects within the scope of work and stay on task
• Able to work well under pressure with minimal supervision

Our culture believes in Powering Your Potential . We provide global opportunities to develop your career, make your community a better place and work with today’s most innovative thinkers to solve the world’s toughest problems.

We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That’s what #LifeAtCummins is all about.

We are looking for a talented Lead Technician - Mechanical to join our team based in Tuas, Singapore. This is an Onsite role reporting to the Service operation Manager. This role will also require travelling within Singapore. Reporting to the Service Supervisor, this role provides support for all Cummins products, primarily in Automotive, Industrial and Marine applications, in a combination of workshop and field work. You will respond to engine breakdowns and provide technical analysis of failure, warranty support and troubleshooting engineering issues. Previous experience in a similar Service role, and knowledge of High-Speed Diesel engines, is essential.

This position offers a long-term career with a global organisation in the power industry and could be the next step in your successful Service career.

In this role, you will make an impact in the following ways:

Responsibilities:

• Establishes and continually develops productive customer relations and ensures prompt and efficient attention to customer needs.
• Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete complex repairs at customer site.
• Performs preventative maintenance activities as per documented schedules and standards on engines and related components in the field.
• Escalates unresolved issues to product specialists or supervisor.
• Coaches and develops technicians and/or apprentices and transfers knowledge and experience to others; may provide work direction; may review repair plans, parts lists, etc.
• Completes required documentation, such as service worksheets, timesheets, warranty claims, quality documents via handwritten forms or business system input screens.
• Identifies additional sales and service opportunities with customer. Completes training in line with skill and business requirements.
• Maintains service vehicle and tools for cleanliness and proper operation.
• Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation and reports any issues / incidents to site management and to their supervisor.

RESPONSIBILITIES

To be successful in this role you will need the following:

• Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
• Customer focus - Building strong customer relationships and delivering customer-centric solutions.
• Develops talent - Developing people to meet both their career goals and the organization’s goals.
• Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.
• Manages conflict - Handling conflict situations effectively, with a minimum of noise.
• Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
• Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
• Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
• Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
• Engine Systems Interactions - Interprets and analyzes the interactions of internal and external electrical and mechanical systems (exhaust, heating, cooling, fuel systems, driveline, aftertreatment, controls, sensors, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair.
• Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
• Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
• Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
• Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

QUALIFICATIONS

Education, Licenses, Certifications:

• Trained Engine Technician (Preferred)
• Vocational diploma from relevant technical institution
• Locally valid driving permit, Class 3 and above This position may require licensing for compliance with export controls or sanctions regulations.

Experience:

• Significant field service work experience
• Expert level knowledge of and/or experience with engine products
• Customer service experience
• Experience providing technical advice and coaching to more junior technicians (preferred)
• Able to write and speak in English language
• Preferably with experience in internal combustion engines
• Experience in Marine environment will be advantageous
• No cross-border relocation provided.
• Team leading experience, 3+ years required.

Description

▶️ Training provided, aircon environment
▶️ Bi-weekly pay available (every 7th and 22nd)
▶️ Min 3 months, extendable or convertible based on performance

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Menicon is a contact lens specialist embracing precision craftsmanship to see life in detail. Join our family in Singapore, the first manufacturing facility outside Japan for daily disposable contact lens and a base for developing technologies and products with advanced, value-added features.

We are looking for candidates with an interest to develop their technical capabilities to join our team as Technical Service Technicians. Our Technicians play a key role in ensuring our operational efficiency and product quality by performing preventive maintenance and troubleshooting to our production equipment.

Responsibilities:

• Operate manufacturing equipment to meet target production schedule and output
• Provide technical support in troubleshooting of equipment to meet production targets and quality standard.
• Perform daily, monthly preventive maintenance activities to ensure reliability and efficiency of equipment
• Actively participate in workplace safety, quality improvement projects

Requirements:

• NITEC in any Engineering discipline
• Able to read and understand electrical and mechanical diagram
• Able to perform 12 hours shift and is willing to work overtime
• Able to lift weights of 10-15kg.
• Willing to work in controlled environment

Job Responsibilities:

• Install, maintain, and repair electrical systems and components.
• Conduct regular inspections of electrical systems to ensure compliance with safety regulations.
• Troubleshoot electrical issues, including diagnosing faults and repairing equipment in a timely manner.
• Assist with the design and layout of electrical systems for new projects or modifications.
• Interpret electrical blueprints, wiring diagrams, and technical specifications.
• Adhere to all safety and quality control standards.

Qualifications:

• Associate's degree or higher in Electrical Engineering, Electrical Technology, or a related field.
• Proficient in troubleshooting and repairing electrical systems and machinery.
• Strong knowledge of electrical codes and safety regulations.
• Familiarity with electrical testing equipment and tools.
• Ability to read and interpret technical drawings and schematics.

Job Description

• Efficiently and effectively manage and operate assigned processing or packaging operation according to the standardized operating procedures, guides and manual
• Ensure the correct cleaning and sanitation of processing equipment are rendered following Good Manufacturing practices

Job Requirement

• A good team player to achieve production targets
• Self motivated and work with least supervision
• Able to be on the feet for long hours
• Transportation provided
• Candidates with relevant experience are preferable
• More focused on attitude rather than educational level
• 5.5 days week with OT's & perks