Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

A mechanical technician in a chemical plant plays a crucial role in ensuring the smooth and safe operation of the facility. Their job scope encompasses a wide range of responsibilities, including:

Job Responsiblities

• Responsible for the maintenance, repair, and troubleshooting of various mechanical equipment, including pumps, compressors, turbines, conveyors, and heat exchangers.
• Diagnosing faults, and carrying out repairs or replacements of piping systems, including installation, inspection, and leak detection.
• Maintenance and calibration of instruments used to monitor and control process parameters, such as pressure, temperature, and flow rate.
• Participate in the installation and commissioning of new equipment, ensuring proper alignment, connections, and functionality.
• Perform scheduled inspections and preventive maintenance tasks on equipment to identify potential problems. Adhere to safety procedures and regulations, ensuring a safe working environment for themselves and others.
• Maintain accurate records of all maintenance and repair work performed, including work orders, parts used, and repair details.
• Assist in training other technicians or apprentices.
• Managing the inventory of spare parts and tools.

Skills, Knowledge & Requirements

• Ability to diagnose and troubleshoot mechanical problems effectively.
• Strong safety awareness and commitment to safety practices and regulations.
• Ability to communicate effectively with colleagues, supervisors, and operators.
• Minimum 8 years experience in local process plants

Working Hours: Mondays - Fridays : 8.00am to 5.30pm
Working Location: Deploy to nearest Army camp

Job Scope:

• Maintain and repair the various weapon systems (i.e. Heavy Armed and Small Arms weapons) in the camp premise.
• Conduct of weapon inspections and repairs.
• Required to travel occasionally to other Training Centres and Institutions to support in the out-process inspection/ repair of weapon systems.

Requirements

• Singaporeans ONLY
• NITEC/Higher NITEC/Diploma in Mechanical Engineering or related discipline
• 2 years contract with good benefits.
• Willing to travel to different camp sites as and when required.

Alternatively, you may send your application and resume in MS Words format to [email protected]

**We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Choo Tchi Seng
Registration Number: R1544906
EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Job Title: Electrical & ACMV Technician

Department: Facilities Management / Maintenance

Reports To: Facilities Manager / Maintenance Supervisor

Job Purpose: To perform installation, maintenance, and repair of electrical systems and air conditioning, ventilation, and mechanical systems (ACMV) to ensure optimal performance and safety of facilities.

Key Responsibilities

Electrical Systems

• Install, inspect, and repair electrical wiring, circuits, and equipment.
• Troubleshoot electrical issues and resolve them in a timely manner.
• Conduct routine maintenance and emergency repairs on electrical systems.
• Ensure compliance with electrical codes and safety standards.
• Maintain accurate records of electrical work performed and materials used.

ACMV Systems

• Install, maintain, and repair air conditioning, ventilation, and mechanical systems.
• Perform diagnostics to identify issues in ACMV systems and implement corrective actions.
• Conduc routine inspections and preventive maintenance to ensure system efficiency.
• Replace or repair faulty components, including compressors, filters, and ductwork.
• Ensure compliance with relevant ACMV codes and safety regulations.

General Duties

• Respond to service requests and prioritize tasks based on urgency and importance.
• Collaborate with other maintenance staff and contractors as needed.
• Keep up-to-date with industry trends and advancements in electrical and ACMV technologies.
• Maintain a clean and safe work environment, adhering to health and safety protocols.

Qualifications and Skills

Education

Technical Cert in electrical or ACMV Trained

Experience

Fresh graduate with Hands-on experience with troubleshooting and repair of electrical and ACMV systems.

Skills

Proficiency in reading blueprints and technical diagrams.

Strong knowledge of electrical codes and ACMV standards.

Ability to operate and maintain specialized tools and equipment.

Excellent problem-solving skills and attention to detail.

Effective communication and teamwork abilities.

Certifications

Relevant electrical or ACMV certification (e.g., Electrical License, HVAC Certification) preferred.

Working Conditions:

Full-time position with potential for overtime or on-call hours as needed.

Physical requirements include lifting, climbing, and working in various environmental conditions.

May involve working in confined spaces and exposure to electrical hazards.

Work Days: 5 days (rostered off/rest)

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Perform maintenance of marine electrical system/component in workshops and onboard vessels
• Supervise any workers being assigned for jobs completion
• Perform corrective maintenance and planned maintenance
• Perform electrical wiring, cabling and modification of electrical circuit
• Test electrical systems and continuity of circuits in electrical wiring, equipment and fixtures, using testing devices such as Multimeter, Insulation tester and Process calibrator
• Participate in the repair of electrical components in workshop and onboard ships.

Requirements:

· NTC/Higher Nitec in Electrical Engineering and related field.

· Preferably with at least 4-5 years working experience in electrical repairs and maintenance.

· Able to read electrical circuit drawings.

· Preferably to have experience in DC/AC motors, Generators, Switchboards and Circuit breakers.

· Experience in testing and calibration of high/low voltage equipment or fault analysis

· Able to perform troubleshooting and fault rectification during daily operations

· Positive-attitude and have initiative to perform all tasks being assigned

· Willing to work in outdoor condition e.g heat, oil and dust

· Willing to work in Changi area

· Only Singapore Citizens need apply

Other Information:

· Location: Changi

· Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT

· 5 days work week

· Working Hours: 7.45am-5pm

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career. This role focuses on developing world-class engineering solutions that meet the unique challenges of biotech production.

In this position, you will provide support to Process Engineers in the characterization of new and existing products, maintaining and improving metrology tools, and ensuring process excellence in a high-volume biotech production setting. You will collaborate extensively with various departments including Manufacturing, Equipment Engineering, Analytical Sciences, Facilities, Supply Chain, and Quality Assurance to support new product releases and continuous process improvement.

Scopes & Responsibilities

• Assist Process Engineers in troubleshooting, sustaining, and continuously improving production lines for consumables related to new product development, yield, quality, and throughput.
• Design and execute controlled experiments to optimize processes, while documenting and analyzing results.
• Support MES ticket handling and process verification/validation activities.
• Conduct nonconforming material analysis and investigations.
• Recommend and implement process improvements to meet production goals across multiple operations and technologies.
• Coordinate execution of equipment and process validation, data collection, and report summarization.
• Collaborate with Engineering/R&D teams to develop and refine processes for new and existing products.
• Maintain and update technical documentation, including technical requirements, drawings, and work instructions for engineering and consumables production lines.

Qualifications

• Diploma or Bachelor’s degree in Engineering, Sciences, or related field.
• Experience in manufacturing within a FDA-regulated environment is advantageous.
• Strong understanding of manufacturing processes within a regulated biotech or medical devices environment.
• Ability to execute test plans for components, materials, systems, and processes effectively.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint).
• Experience with product & process feasibility studies, line validation, qualification, and process optimization.
• Excellent team collaboration, interpersonal, and communication skills.
• Strong documentation and technical report writing abilities.
• Ability to manage stress and handle multitasking across functions effectively.
• Proactive, innovative, and self-motivated.

Responsibilities:

• Inspect and troubleshoot equipment and machine.
• Perform preventive maintenance to achieve minimal to zero machine downtime.
• Source replacement parts.
• Repair and replace faulty parts & equipment.
• Carry out minor fabrication
• Carry out building maintenance and service
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.

Requirements:

• Rich experience as a technician especially on machine maintenance and repair
• Electrical, electronic and mechanical knowledge
• Detailed with problem-solving skills

Job Responsibilities

System Maintenance and Configuration:

• Install, configure, and maintain hardware and software for the organization’s infrastructure.
• Monitor system performance to ensure everything runs smoothly and securely.
• Regularly update systems to provide necessary patches and upgrades.

Network Management:

• Manage network servers and technology tools.
• Set up user accounts and workstations.
• Monitor network performance and integrity.

Security:

• Ensure security through access controls, backups, and firewalls.
• Frequently review security protocols and make adjustments as needed.
• Respond to and resolve help desk requests.

Data Management:

• Oversee data storage solutions and database systems.
• Ensure data recovery and backup procedures are in place and functioning correctly.
• Manage and store backups.

Troubleshooting and Support:

• Troubleshoot issues and outages.
• Upgrade systems with new releases and models.
• Provide technical support and training to other employees.

Documentation and Policy Development:

• Develop expertise to train staff on new technologies.
• Build an internal wiki with technical documentation, manuals, and IT policies.
• Document system performance and plan for future upgrades.

Collaboration and Communication:

• Work closely with IT project managers and other technical staff.
• Collaborate with other departments to understand their technical needs and implement IT solutions.
• Report regularly on operation status.

Job Requirements

• Degree/Diploma in Computer Science/Information Technology.
• Basic knowledge of computer networks/infrastructure.
• Strong analytical and problem-solving skills.
• Good understanding and possess troubleshooting know-how on IT infrastructure and software.
• Able to handle sensitive information confidentially.
• Minimum 2 years of experience in a similar field.
• Strong knowledge of MS 365 and Azure.

Job Description:

• Integrate and install auto-mechanical/ electrical/ electronic subcomponents /robot/equipment according to process instructions
• Carry out calibration/acceptance test on sub-systems/robot/vehicle/equipment according to process instructions
• Perform functional checks, setting, testing, fault finding and failure analysis
• Service and troubleshoot of Auto-mechanical / Electronics / Electrical control system

Job Requirements:

• Minimum qualification of NITEC in Mechatronics/Electronics/ Electrical/Robotics & Smart Systems or related discipline
• Candidates with 2 to 3 years’ experience in automotive or relevant industrial experience will also be considered
• Perform troubleshooting and fault analysis on Hydraulic/Pneumatic/ Electronics/ Electrical systems
• Basic understanding of electrical/electronic circuit
• Able to perform analytical and diagnostics with measuring equipment like Digital Meter & Scope
• Advantage with class 3 driving licence
• Willing to travel overseas

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

The Job
The Technician will learn how to operate the terminal system by executing and maintaining the day-to-day operation in accordance with company’s work procedure under the supervision and direction set by operations and company management team.

Key responsibilities:

• Carry out the daily action plan and update the checklist accordingly.
• Perform routine check on valves and pumps status on a regular basis.
• Ensure samples are collected and recorded properly.
• Conduct ship/shore conference and berthing/unberthing vessels.
• Ensure running pumps are in good order.
• Ensure TPI/CPI are skimmed.
• Assume the role of auxiliary fire fighter during the event of emergency.
• Carry out housekeeping in the assigned area.
• Supervise the blinding/de-blinding work.
• Perform tank de-gassing, gas-test for hot work and confined space entry.
• Perform WDO & Tank Farm draining as per operations requirement.
• Perform tank gauging & temperature measurement.
• Carry out daily patrol rounds and update shift logs.
• Any other tasks as and when assigned by the management.
• Adhere to the company’s HSSE (Health, Safety, Security and Environment) Policy.

Job Requirements

• Minimum N’ level.
• Preferably tertiary education in petrol chemical or related course.
• Strong interest in oil and gas industry.
• Ability to engage in critical analysis.
• Ability to function well in stressful situations.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Roles & Responsibilities

• Plan, coordinate, and execute quality assurance and control activities for projects, ensuring compliance with contract specifications.
• Ensure quality assurance and control across projects
• Maintain regulatory compliance and safety standards
• Liaise with suppliers and subcontractors to ensure quality control and adherence to standards.
• Facilitate off-site inspections, sampling, and testing of materials.
• Compile QA/QC record for submission to Client

Requirements

• Diploma in Civil Engineering or its equivalent
• StEr will be great advantage
• At least 4-year related working experience
• Welding inspection certificate (CSWIP 3.1) is an advantage
• Able to work in a team

• Onsite rectify clients vehicles
• Strong mechanicl and technical knowledge
• Familiarity with a variety of vehicle makes and models

Job Duties and Responsibilities:

• Perform daily operational activities which includes attending to customers' enquiries, needs and complaints
• Perform preventive and breakdown technical support and maintenance for mechanical/electrical services, maintenance of blower systems and electrical/electronic control systems.
• Require travelling within Singapore.

Minimum Requirements:

• Minimum ITE graduate with 1 year experience or without any working experience in Mechanical, Electrical, Instrumentation or Electronic & Computer Engineering field are welcome to apply
• Having own transport will be advantageous but not compulsory.
• Hard worker and able to adapt and learn fast.

• Engage in the installation, repair and maintenance of various technology-based equipment.
• Conduct regular checks and troubleshooting to ensure the technical equipment operates at its optimal performance.
• Provide on-site assistance with hardware and software use and address and resolve technical issues faced by clients or customers.
• Carry out diagnostic tests and analyses to identify the roots of technical issues.
• Liaise with team members and communicate with stakeholders in layman's terms to assess needs and system requirements.
• Record and document instances of hardware failure, repair, installation and removal.
• Stay up to date with technical developments and advancements in allied fields.

Requirements

• working hours : 7:30am - 5:15pm (5.5 days)
• Nitec in Mechanical/Mechatronics

Job Summary

Assist Operations Manager in up-keeping and maintenance of the club’s AV and audio systems. Also to provide support and advice during events and functions that required the usage of AV systems.

Main Duties and Key Responsibilities

o Reporting to the Operations Manager, you are to provide all audio visual (AV) support to the club facilities and events held in the club.

o Provide sound advice and reliable support to members and guests, and work closely with maintenance team to troubleshoot any possible technical issues should it arise during the event.

o Propose and perform preventive maintenance for all audio visual equipment to ensure that they are well maintained and in good working condition.

o Liaise with external AV contractors to carry out improvement works effectively.

o Keep track and conduct monthly inventory check on all the audio visual equipment.

o Perform any other duties as and when assigned by your Manager.

Job Requirements and Qualifications

o Minimum GCE 'N' or 'O' level with at least 2 years of relevant experience in similar industry.

o Customer-oriented, independent with initiative.

o Able to perform shift work including weekends and public holidays.

o Only Singaporean / PR may apply.

Key Responsibilities:

• Plan and Execution of plant Predictive, Preventive Maintenance (PPM) works,
• Plant operational support and troubleshooting of electrical and instrumentation equipment.
• Work, coordinate with and supervise the resident maintenance contractors (IE) according to the job plan and scheduled daily maintenance activities.
• Follow equipment maintenance procedures, code of practices, engineering procedures derived from AIP standards and compliance of SHE excellence related to his works.
• Utilize Maximo to maintain plant electrical and instrument spare parts.
• Maintain a complete and accurate plant maintenance records & report.
• Other duties as assigned to meet business and operation needs.

The Candidate should have:

• Diploma or NTC qualification in a technical or engineering discipline; an electrical or instrumentation discipline would be essential.
• Minimum of 5 years hands on maintenance experience in the refining or chemical process industries
• Good functional knowledge and experience in the maintenance of Process Equipment and Instrumentations.
• Good PC skills and understanding of electrical drawings, logic diagrams, programming, schematics, loop drawings and P&IDs.
• Good interpersonal and communications skills.
• Ability to work effectively in a multi-discipline and multi-cultural team in a high-pressure environment.

Supporting Electrical and Automation at Tuas plant.

Responsibilities:

· Responsible for safety personnel and plant.

· Participate directly in site emergency response team.

· Troubleshoot and repair a variety of complex liquid and powder processing, blending and high-speed packaging equipment.

· Repair and install various equipment, guards and piping using lifting devices if required.

· Perform PM’s and work orders as well as project work.

· Disassembly, diagnosis, repairs and re-assembly of machinery to hygienic and sanitary standards.

· Participate in the development of a Predictive Maintenance program at Tuas.

· Complete all necessary reports and documentation via hardcopy and computer.

· Maintain a clean and sanitary environment in accordance to all safety and GMP policies.

· Be able to use independent judgment and work well within a team concept.

· Interact with internal and external customers in a professional manner.

· Follow all cGMP requirements to ensure proper manufacturing environment.

· Actively participate in the resolution and elimination of downtime issues.

· Assist in the creation of SOP’s, checklist, and work instructions.

· Provide training and guidance to new employees.

· Complete all necessary transactions, reports and documentation with accuracy and timeliness.

· Maintain a clean and sanitary environment to 5S or similar standard.

· Adhere to the Tuas Code of Conduct.

Requirements:

· Nitec/Higher Nitec/Diploma in Mechatronics equivalent qualifications.

· At least 3 yearsof industrial maintenance experience.

· Previous experience in a food or pharma manufacturing environment is preferred with experience and knowledge of predictive and preventative maintenance technologies.

We are looking for multiple seasoned Senior and Staff System Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Processor (NPU) architecture, programming Model, simulation, verification, profiling and optimization
• Specification, review and verification of other IP blocks
• FPGA images and IO boards for pre-silicon verification and design exploration
• Boot ROM, bare metal BSPs, sample applications

Responsibilities:

• Support Inference Engine, Toolchain and ASIC teams on NPU
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C bare-metal design, implementation, optimization and debugging using GCC-like toolchains
• Strong processor architecture knowledge: ARM/RISC-V ISA, symmetric multiprocessing, cache architecture, SIMD, Vector Processing, custom instructions
• Strong software, hardware and FPGA debugging capability
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with

o Python for prototyping, demo, verification and/or automation

o OS: GNU/Linux, proprietary RTOS, Bare metal

The following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded system architecture and development experience.

Supporting Electrical and Automation at Tuas plant.

Responsibilities:

· Responsible for safety personnel and plant.

· Participate directly in site emergency response team.

· Troubleshoot and repair a variety of complex liquid, drying and powder processing, and packaging equipment.

· Back up and maintain PLC, HMI, VSD and other controller program and software version.

· Troubleshoot automation issue by hardware or instrument, program setting/bug and connection issue.

· Knowledge in Alen Bradley PLC, Wonderware SCADA and In Batch system for Troubleshoot automation related in Dry Blending, Filling and Packaging system.

· Evaluation of P&IDs, functional design specification.

· Responsible for performing PM’s and work orders as well as project work.

· Disassembly, diagnosis, repairs and re-assembly of machinery to hygienic and sanitary standards.

· Participate in the development of a Predictive Maintenance program at Tuas.

· Complete all necessary reports and documentation via hardcopy and computer.

· Communicate with Engineering technician on any major process issues as and when required.

· Maintain a clean and sanitary environment in accordance to all safety and GMP policies.

· Be able to use independent judgment and work well within a team concept.

· Interact with internal and external customers in a professional manner.

· Follow all cGMP requirements to ensure proper manufacturing environment.

· Actively participate in the resolution and elimination of downtime issues.

· Assist in the creation of SOP’s, checklist, and work instructions.

· Complete all necessary transactions, reports and documentation with accuracy and timeliness.

· Maintain a clean and sanitary environment to 5S or similar standard.

· Adhere to the Tuas Code of Conduct.

· Provide technical assistance and support regarding all projects, installations, and repairs.

· Maintain smooth communication with different levels of departments and peers.

· Upgrade hardware and software for improved process control.

Requirements:

· Nitec/Higher Nitec/Diploma in Electrical & Electronics / Mechatronics equivalent qualifications.

· At least 3 years of industrial automation & maintenance experience.

· Previous experience in a food or pharma manufacturing environment is preferred with experience and knowledge in Automation and predictive and preventative maintenance technologies.