Our client is a global provider of intelligent automation and integrated security management solutions.

• Assist the project team with documentation, report drafting, and coordinating project tasks.
• Participate in the system design, technical development, and implementation phases.

Requirements:

• ITE in Electrical or equivalent
• Minimum 3 years of experience in Security System Installation.
• Good understanding in computer, network, security, ELV and electrical system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Chemical Technician

Working Days & Hours: 3-4 Day | 8am to 8pm (12 hour rotating shift)

Working Location: Jurong Island (Transport provided at Jurong East)

Salary Range: $2000-$2600

• The Chemical Technician is responsible for monitoring and maintaining the operations of the process units and equipment by measuring, recording and controlling process operating parameters.
• Expected to diagnose and rectify systems and components’ faults in accordance to established procedures and specifications and to ensure that the process units and equipment operates safely and efficiently.

Job Responsibilities:

• Perform minor maintenance.
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors.
• Carry out filter changes.
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations.
• Adjusting process parameters to optimize process operations under supervision of Supervisors.
• Commissioning and decommissioning of process equipment.
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products.
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures.
• Performing emergency response activities and drills

Job Requirement:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Working Days: 5.5 Days Work Week
Working Timing: Mon - Fri, 9am - 6pm, Sat 9am - 1pm
Salary: $ 1800 - $ 2500 + $ 500 Attendant Allowance + High OT Payout
Office: Sembawang

Requirements:

• Relevant experience is required
• Full-time NEA Vector Control Technician License
• Class 3 Driving License (Required, Manual Company Van Provided)
• Able and willing to do OTs (OTs will be paid accordingly)

Job Responsibilities:

• To carry out DETAILED INSPECTIONS and to administer appropriate pest management plans to assist with eradicating the pests and provide QUALITY SERVICES to customers’ premises
• Able to perform pest control works at residential, commercial, industrial & food establishments
• Most of the jobs will be conducted within the F&B premises

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Highlights

• Career Development Opportunities
• Duty Meals, Birthday Leave and Flexible benefits
• Complimentary Room Nights
• Discounted Room and Dining Rates

As a Technician, we rely on you to

• Manage, coach and supervise the engineering technicians
• Maintain electrical and mechanical plant & equipment of the hotel
• Manage the engineering programmes
• Organize the record for the future planning

We are looking for someone who:

• Has a passion for Engineering
• Understands engineering equipment in a hotel
• A friendly, helpful and trustworthy leader
• Enjoys taking on a new challenge
• Not afraid to take up new challenges
• Always prepared
• A motivator and a self-starter

If you are the right person, what are you waiting for? Click the apply button now!

• Perform system performance test and evaluation and customer qualification focusing on vision inspection system.
• Evaluating and establishing vision system performance specifications.

Requirements:

• Diploma in engineering discipline
• At least 1 year of field servicing experience in semiconductor industry
• PC hardware, OS and networking knowledge

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is a tank storage company.

• Perform preventive and corrective maintenance, ensuring quality and safety standards.
• Ensure compliance with safety regulations and manage permits like JSA and LOTO.
• Oversee work orders, support contractors, and mentor junior technicians.
• Contribute to process improvements, supervise projects, and lead equipment training.

Requirements:

• ITE in Maintenance Engineering or equivalent.
• At least 2 years of experience in maintenance, inspection work, and terminal equipment and assets.
• Well-versed in terminal equipment, assets, and fire-fighting and emergency procedures.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Conduct regular fuel farm operations and maintenance tasks following SOPs and safety guidelines.
• Preparation the daily logs and supervise the troubleshooting processes carried out by contractors, and reports all equipment abnormalities to the maintenance teams.

Requirements:

• NITEC and above
• At least 2 years of experience in Aviation industry.
• Possess valid class 4/5 and forklift license
• Proficient in utilizing applications with a strong awareness of cybersecurity.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

job responsibilities

1、Assembly of parts and components to camera products, following company’s design and manufactory protocols.

2、Work closely with manufactory and quality control team in headquarters to ensure products meet company standards.

3、Complete and pass Manufactory Technician training tests.

4、Translate documents to English when required.

5、Provide reports and suggestions to improve work efficiency and product quality.

6、Assist in facility setup.

7、any other job assigned by managements.

Job requirements

1、Polytechnics or Bachelor's degree, majoring in mechanics, manufacturing, optics, physics, or related fields；

2、Experience in assembly, testing and cleaning of optical or electronic devices are a plus;

3、Working experiences in Cleanroom environment is a plus.

4、Strong initiative, proactive and teamworking spirits.

5、Frequent travel to headquarters in Fuzhou, Fujian province, China is required.

Summary of role requirements:

• Looking for candidates available to work:Monday: Morning, Afternoon
  Tuesday: Morning, Afternoon
  Wednesday: Morning, Afternoon
  Thursday: Morning, Afternoon
  Friday: Morning, Afternoon
  

Our client is specialized in the production and distribution of disposable medical devices.

• Perform technical support for daily manufacturing operation.
• Ensure all equipment are well maintained.
• Assists in machine and equipment improvement and upgrade.

Requirements:

• Nitec in Engineering or equivalent
• At least 3 years of troubleshooting equipment failure and handling technical issues experience in cGMP manufacturing environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Conduct troubleshooting, repair equipment-related failures to minimize downtime, and ensure housekeeping and adherence to safety and cleanroom protocols.
• Arrange and perform periodic equipment preventive maintenance.
• Collaborate with engineers to troubleshoot process-related issues pertaining to equipment failure.

Requirements:

• Nitec in Mechanical / Electrical / Electronics / Mechatronics Engineering or equivalent.
• At least 1 years of relevant working experience
• Familiarity with Programmable Logic Control (PLC).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

1. Job Purpose

The job-holder is responsible to assist the specialists in dental care delivery according to established hospital policies, procedures and standards of dental care and practices.

2. Duties and Responsibilities

2.1 Primary Responsibilities and Duties (80%)

• · Responsible for providing four-handed chair-side assistance to specialists in dental treatment and procedures for various disciplines.
• · Responsible for ensuring the instruments and materials are ready for each appointment, and ensure the proper maintenance of dental instruments.
• · Comply with Infection Control and maintains Infection Control Standards.
• · Comply with work safety regulations in handling of dental instruments and equipment.
• · Assist in cleaning, sterilising, sorting and packing of instruments in general sterilisation area.
• · Manage Inventory in assigned dental operatory and assist in stock ordering.
• · Assist with patient’s appointment.
• · Collaborate and co-operate with clinicians and other health-care providers in the smooth delivery of dental care and services.

2.2 Secondary Responsibilities and Duties (20%)

• · Participate in service quality activities.
• · Coach and guide the junior staff in dental assisting (For Dental Surgery Assistant role)
• · Assume additional responsibilities as assigned by Clinic Supervisor/ Clinic Manager.

3. Job Specification

• · Minimum NITEC Certification in Dental Assisting or Equivalent Qualification (For Dental Surgery Assistant role)
• · Minimum GCE “N” Level Certification
• · Proficient in computer skills (MS Office).
• · Possess good interpersonal and communication skills.
• · A team player and is also able to work independently.
• · A hands-on person with eyes on details.
• · Display compassion and have a positive and caring attitude.
• · Have strong interest in dentistry field

Join us help transform the healthcare landscape in Singapore! We - the NUHS@Home team - are a dynamic new home hospital service looking for passionate and innovative administrative staff to co-create with us.

As a Senior Executive Assistant for NUHS@Home, you will play a vital role in providing administrative support to the Nursing team of NUHS@Home. You will be responsible for information management, training administration, project, audit and meeting coordination. We're looking for people with new ideas and a can-do attitude. People who are willing to think outside the box and embrace innovation. People who never give up and are always striving to improve. If you're a proactive problem-solver who is passionate about healthcare and wants to be part of an exciting new home hospital service, we want to hear from you.

Job Responsibilities

Primary Duties & Responsibilities
Information Management
• Maintain nursing competency checklists, policies and procedures and ensure these are reviewed and updated in a timely manner.
• Maintain confidential and sensitive information.
• Organize and manage files, documents, and records.
• Develop forms when needed.
• Be proficient with Microsoft office software and technology tools.

Training Administration
• Registration and enrolment: Managing the process of enrolling staff in the training courses as per training schedule and tracking their progress. Collaborate with all stakeholders and ensure sufficient participants for the training to be held as planned.
• Classroom Set Up: Ensure appropriate classroom set-up for the training programs.

• Resource Allocation: Allocate resources such as training rooms, training materials, aids etc. for the training programs.
• Training Inventory: Ensure sufficient and appropriate training materials are accounted for and purchased in a timely manner.
• Evaluation: Measure the effectiveness of the training programs through assessments, feedback, and performance improvement metrics.
• Documentation: Keep records of training attendance, completion, and any certifications or credentials obtained.
• Continuous Improvement: Analyze training outcomes and feedback to make improvements to the training on an on-going basis with trainers.
• Compliance: Ensure training programs meet legal and regulatory requirements especially those mandated by Singapore Nursing Board etc. to achieve required nursing training hours.

Secondary Duties & Responsibilities
• Provides administration support for onboarding and offboarding nurses such as IT and pass access.

• Support internal and external audits, including but not limited to licensing and accreditation.
• Perform secretariat roles for assigned committees.
• Perform planned activities such as Nursing Grand Round, Quality week events etc.
• Handle correspondences and coordinate meetings.
• Any other tasks as assigned by the Supervisor.

Requirements
• Diploma in any discipline

• Good computer literacy and conversant in MS Office
• Good written and verbal communication skills
• Able to cope with and work in a fast paced environment
• Must be a good team player with positive work attitude and able to work independently
• Prior knowledge/working experience in a hospital setting is an added advantage

(1) Overview and purpose of the position*

1) Responsible in overseeing the performance of outsourced maintenance service providers in mechanical services and systems for the hospital and ensure functionality as well as serviceable at all times.

2)To audit and monitor service standards rendered by specialist vendor and outsourced maintenance service provider.

3)To provide support to Head of Department and Building Managers in capital nature replacements, systems and building improvement projects.

4)To coordinate and support hospital’s A&A and minor works.

(2) Accountabilities*

(2) Related Performance Indicators

1) Strong culture of staff and leadership accountability

• Work closely with FM Institution Lead and Mechanical Lead, in building clear scope, expectations and deliverables for the Mechanical team as well as planning for specialty training and develop the capabilities of Mechanical Team members.
• As a Subject matter expert to assist the Mechanical Lead in ensuring team members understands their scope.
• Work closely with team members, service provider and specialist vendors on system breakdown investigations, inspections, audits, review of maintenance program, etc.
• To lead / provide support in the investigation of incident/system failure to determine root cause of failure as needed.
• To participate and support in audits that the hospital subscribes to.

2) Contract management, evaluation, negotiation, and execution

• Manage Mechanical systems contracts to ensure timely renewals and contract requirements are fulfilled.
• Ensure timely renewal of authority licencing.
• Ensure processes are in accordance and compliance with Audit Compliance, NUHS Contract Management, Procurement and Finance Policies and Process.

3) Manage Managing Agent, vendors and liaison with authorities as well as communication to stakeholders

• To respond and support the maintenance agent and vendors in mitigating and recovery of critical system failure or incident.
• Work closely with Admin on compilation of contract documents, such as agreement, checklist, warranties, etc.
• Monitor vendors’ performance, deliverables and Key Performance Indicators (KPIs) are as per contract awarded.
• Perform invoice verification against works completed for timely processing of invoices.
• To ensure repair to reported system fault and breakdown are carried out in a timely manner.
• To carry out monthly analysis to Mechanical systems breakdown and recommend improvement plan as needed.
• Filing and documentation recording of all authorities’ correspondences.
• Conduct internal audits to check on non-compliances, identify gaps and follow-ups till closure.
• Represent Mechanical Team as the liaison party on authority matters.

4) Developing and implementing procedures, policies and checklists

• Review and update Standard Operating Procedures (SOP) and working instructions on a regular basis.
• Develop and harmonise trade related SOPs, Preventive Maintenance Checklists and working instructions with the cluster institutions for alignment to prevailing Singapore Standards / Code of Practices and/or industry best practices for benchmarking.

5) Asset Management

• Plan and oversee Mechanical system upgrades/improvements or replacements before their expiration or its end of life.

6) Projects

• Project Manager or render support to Project Managers for improvement works to existing hospital facilities such as renovation and retrofitting, replacement of system infrastructure and improvement initiatives to existing specialized systems and hospital facilities.
• Prepare Approval To Purchase (ATP) and Approval To Award (ATA) papers for Preventive Maintenance Contracts and projects.

7) Knowledge management

• Maintain good documentation (e.g records of all contracts, reports, agreements, check lists) with FM Admin team to ensure full compliance.

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Minimum three (3) years of relevant experience in management of mechanical systems operations. (Note: Minimum 8 years for Diploma Holders)
• Experience in Fire Safety/ Alarm System, Medical Gas/ Vacuum System, Lift and Escalator System, Pneumatic Tube System, Mechanical Automation system is advantageous.
• Health care experience is advantageous.
• Good interpersonal skills and customer service oriented.
• Positive work attitude, ability to work with all levels of staffs and strong team player.

Job Scope details:

Conduct initial meetings to gather requirements and understand the existing infrastructure.

Document the project scope, objectives, and deliverables.

Assessment and Planning:

Assess the current infrastructure and network setup.

Plan the VDI deployment, including resource allocation and network configuration.

Design:

Design the Omnissa architecture, including core components, and DR site setup.

Create detailed design documents covering all aspects of the deployment.

Implementation (DC and DR):

Deploy VMWare Hypervisor and vSphere components (vCenter, vSwitch)

Deploy Windows server machines, Microsoft SQL server, Windows KMS server, Vmware dynamic environment manager and App volume server

Configure Vmware Horizon/Omnissa for users.

Set up the DR site with replication and failover configurations.

Create and deploy master images for VDI desktops.

Implement user profile management and policies.

Provisioning of VDIs for users

Testing and Validation:

Conduct thorough testing of the VDI environment, user testing and failover tests.

Validate the setup with user acceptance testing (UAT).

Training and Documentation:

Provide knowledge transfers for administrators and end-users.

Deliver comprehensive documentation, including as-built documents and operational guides.

Go-Live and Support:

Assist with the go-live process and provide post-deployment support.

Required Loca Cat 2 Clearance prior to onboard candidate.

Job Description:

• Perform mechanical/electrical assembly or wiring for equipment/machine;
• Perform on-site service and support.
• Perform any other assignments assign by HOD;

Job Requirements:

• Experience in machine /electrical assembly or wiring for equipment/machine;
• Follow established safety rules and regulations;
• NITEC in Mechatronics/Electrical/related engineering field;

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of relevant working experience
• Able to work from 7am - 7pm

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

We are assisting our client, part of a global engineering and technology group, look for an experienced Software professional to lead a team of software engineers and work closely with other cross functional teams, Service Delivery Managers and Project Managers to deliver quality satellite ground software systems projects for their clients.

Responsibilities

• Drive the design and architecture of satellite ground control and antenna management software systems.
• Lead software team in implementing design, testing, verification, and validation of all software components.
• Implementation of cybersecurity measures for software applications
• Generate and maintain software development documentation.
• Plan and provide necessary software maintenance, training, and consultancy to users on the deployed software.
• Continuously develop new skills & techniques in software technologies to improve and reduce software development time and effort.
• Participate in the definition and development of future products.
• Collaborate with various stakeholders including customers, and engineering teams across organizations.
• Able to challenge the status quo, think different, thrive in ambiguity, care for team members and being ever curious.

Requirements

• Minimum 8 years’ experience in mission critical system software development.
• Proficient in developing full stack applications, preferably with C#, JS.
• Experience with database, API design, network architecture, message broker, and cloud technologies.
• Experience with core engineering infrastructure tools such as GIT servers, CI/CD pipelines, Container Technologies.
• Familiar with agile software development lifecycles.
• Good understanding of systems and hardware.

About the role

Join our dynamic team at NTT DATA SERVICES SINGAPORE PTE. LTD. as a System Analyst (KYC/AML). You will play a pivotal role in supporting our organization's compliance and risk management initiatives within the Banking & Financial Services industry.

What you'll be doing

• Analyse and design solutions for Know Your Customer (KYC) and Anti-Money Laundering (AML) systems and processes
• Collaborate with cross-functional teams to identify and implement improvements to KYC/AML operations
• Perform system testing, configuration, and maintenance to ensure optimal performance of KYC/AML applications
• Develop and document standard operating procedures, user guides, and training materials
• Stay up-to-date with regulatory changes and industry best practices in KYC/AML compliance
• Proficiency in firewall, network, and security concepts to draft system diagrams and raise firewall connectivity
• Techno-functional skillset who can design technical solutions and operational processes

What we're looking for

• Relevant degree in Computer Science, Information Systems, or a related field
• Solid 8-10 yrs experience in Unix/Linux, Shell Scripting, SQL and database management is Must
• At least 6 years of hands-on experience in middleware (Apache, Jboss, and Maria database) installation, configuration and troubleshooting
• Strong understanding of KYC and AML regulations, processes, and systems
• Proficiency in analysing requirements, designing solutions, and implementing system enhancements
• Excellent problem-solving, critical thinking, and communication skills

Leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia.

Your new role

• Understand the business processes and work with users to design and develop an end-to-end solution.
• Provide advice and assistance to business users in the effective use of application system and information technology.
• Manage the development of the application system and ensure the project is implemented within budget and according to schedule.
• Design solutions that are of quality and functional to ensure a good user experience.
• Monitors the performance of the application and work with relevant stakeholders to troubleshoot any issues surfaced in the production environment.
• Work closely with various technical, solution and information architects to ensure the application developed is robust and align with the Enterprise Architecture.
• Produce technical documentation for application systems.

What you'll need to succeed

• Experience in application development using the following technologies and programming languages such as Mobile, web, object-oriented programming, SQL, Java, JavaScript, Mainframe.
• Experience in Project Management and is able to manage user expectation and deliver within project timeline
• Experience/knowledge in Scrum /DevOps concepts
• Experience/knowledge in the various technologies supporting CI/CD such as GitLab, Confluence, JIRA, SonarQube
• Experience/Knowledge in Cloud, microservices architecture and container technologies such Docker, Kubernetes
• To have a keen interesting in IT / programming / system designs
• Good understanding of SDLC.
• Secure coding to prevent application vulnerabilities (for eg. Cross-site scripting; Injection vulnerability flows such as SQL injection, command injection; Race conditions; Improper error / exception handling etc)
• Application integration with government services such as CorPass, SingPass.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is required

Do note that these roles are only open to candidates currently residing in Singapore.

Please reach out to me at [email protected] with your latest CV for a confidential discussion.

Have A Great Week!

Registration ID No. R1984348

EA License number: 07C3924

Company Registration No. 200609504D

-Able to use laser cutting equipment .

-Able to do carpentry

-Able to do LED signages

-Able to do Electrical works

-Able to do Signage Installations

-Able to carry heavy load

-Able to work long hours, public holiday and overtime

• A minimum of 5 years’ experience in a similar role.
• Basic computer skills.
• Able to work independently and with a good working attitude
• Experienced/Responsible/Diligence.
• Strong team spirit.
• Able to work any shift
• Able to work on weekends and public holiday
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed