Primary Function:

To perform NDT inspection in Rolls-Royce Seletar premises in an efficient and effective manner.

Duties and Responsibilities:

• Identify surface or very near surface discontinuities in a weld or critical area of engine component using Eddy Current and Ultrasonic Inspection.
• Use Portable handheld scanning technique to detect surface and subsurface defects.
• Perform FPI and inspect under UV light for flaws open to the surface such as cracks, laps, etc.
• Perform Binocular Inspection which is capable of viewing up to 40X magnification.
• Monitor the usage and performed calibration on NDT equipment and measuring instrumentation.
• Ensure all tasks achieve agreed quality standards and deadlines in line with customer OEM and Company requirements.
• Work within NDT team to achieve optimum levels of performance, being particularly aware of On-Time Delivery.
• Ensure that processes and procedures are followed to ensure all tasks are performed efficiently and to the required quality standards.
• Comply with all safety procedures and legislation associated with NDT and aeronautical product.

Requirements:

• Minimum Diploma holder and equivalent
• Minimum of 3 years aviation NDT experience.
• Solid experience in Ultrasonic and Eddy Current Inspection (must have completed all necessary practical hours).
• Possess good analytical skills.
• Proficient in using Microsoft office tools.
• Be detail-oriented.
• Be able to use wide range of tools and instruments.
• Have a good eyesight and color vision.
• Available to work on flexible working hours.

Responsibilities:

• To Perform visual and NDT inspection on aircraft components
• To perform system checks of the NDT processes
• Have the skills and knowledge to set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection and document the results
• Familiar with the scope and limitations of the technique / method which is certified
• Have the skills and knowledge to conduct system performance checks in accordance with the applicable process standard
• Capable of developing work procedures / instructions from process specifications or standards
• Work closely in accordance with Standard Operating Procedures, Data Cards, Process Controls to achieve the highest quality of work.

Requirements:

• NITEC qualification in Engineering or Diploma In Engineering
• Possess NDT Level 2 (ASNT/APCN Aero/NAS 410/En 4179) in ET and PT or MT
• At least 2 years experience in the NDT inspection for aircraft components
• Candidate who passed M10,CO1CAAS paper will be advantage
• Salary range is commensurate with experience
• Candidates must be able to meet near vision & color perception requirement

Currently we have vacancy for Aviation Technician.

If you have suitable candidate, pls recommend.

Scope of work includes:

1. Track, Disassemble, cleaning and checks incoming cabin parts.
2. Day to day maintenance/repair of aircraft interior parts
3. Maintenance of tools and equipment
4. Able to understand Engineering drawing, speak and write English.
5. Prefer Male Singaporean or PR.
6. Salary range from 2K depend on experience, $50 Attendance Allowance, $50 Telephone Allowance.
7. 3 month confirmation / Working Hours Mon to Thu 8.30am to 6.30pm & Fri 8.30am to 5.30pm
8. Male cannot grow beard.
9. Housekeeping, cleaning/ clearing of rubbish and others.
10. Mechanical, Electrical Engineering Certificate (Nitec. Higher Nitec, diploma)
11. A pleasant working attitude with a drive to learn Team player with good communication skills
12. Annual Leave starting from 10 days Max 14days for Technician.

Job Responsibilities

• To carry out the day to day maintenance schedule assigned by the Technicians, Supervisor/Operations Manager.
• To check, maintain and plan smooth operations of all building services.
• To assist the Supervisor or Operations Manager to keep and update records of M&E installations and equipment in the building.
• To assist and monitor the performance of term contractors and contractors on call.
• To ensure proper accounting of all tolls, equipment and stocks.
• To maintain proper records of building plans, drawings and all M&E services including operational manuals.
• To ensure that all essential M&E plant rooms are checked. Maintained and properly secured.
• To attend to emergency arising from breakdown of malfunction of M&E services.
• To monitor and keep records of water and electricity consumption.
• Notwithstanding the above, you are required to undertake any other responsibilities assigned by the Management.
• 6 days work per week

Job Requirements

• Minimum 1 year Experience in Building/Facility/ACMV maintenance. Fresh candidate will also be considered. Training will be provided.
• G.C.E. or NITEC Certificate (Building/Electrical/Mechanical Engineering) or equivalent.
• Must be able to perform shift duties on weekdays, weekends & Public Holiday.
• Positive working attitude and a teamplayer.
• Salary package shall commensurate with relevant work experience. Please apply with your detailed resume with contact information with last drawn and expected salary.

Staff Transport available at Khatib and Sengkang.

Job Description:
We are seeking candidates with hands-on experience in instrumentation within the process industry. The ideal candidate will have a strong background in the installation, maintenance, calibration, and troubleshooting of process control instruments and systems. Proficiency in working with field instruments, control systems, and safety protocols is essential.

Key Responsibilities:

• Install, calibrate, and maintain instrumentation systems in process environments.
• Troubleshoot and repair instrumentation issues.
• Ensure compliance with safety and industry standards.
• Collaborate with engineering teams for system upgrades and improvements.

Requirements:

• Proven experience in instrumentation within the process industry.
• Strong understanding of control systems, sensors, and measurement technologies.
• Knowledge of industry safety standards and procedures.
• Relevant technical certifications or qualifications.

If you meet these criteria, we invite you to apply and join our dynamic team.

Key responsibilities

· Test and troubleshoot instruments, components and assemblies using appropriate Test equipment.

· Test electrical equipment or systems to ensure proper functioning.

· Carry out Avionic Modifications including new wiring installations.

· Complete all tasks in the allotted time frame and to the quality standards of our company.

· Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns.

· Keep records of maintenance and repair work. Maintain repair or maintenance records.

· Order supplies, equipment, materials and parts for repairs and general maintenance.

· Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

· Carry out schedule servicing, and troubleshooting and defect rectification.

· Carry our good housekeeping and observe all Health and Safety Procedure.

· Any Ad-hoc assignment as assigned by Supervisor or Managers

Qualification / Expertise / Skills

• Minimum NITEC / Higher Nitec , Diploma in Aerospace Electronics / Aerospace Avionics.
• At least 2 years of experiences practical and documented aircraft maintenance experience.
• Those with experience on any of the following types; Fokker 100, ATR, E190 or B737,A320 would be an added advantage.
• Knowledge in Base Maintenance activities would be an added advantage.

Job Description:
We are seeking candidates with hands-on experience in instrumentation within the process industry. The ideal candidate will have a strong background in the installation, maintenance, calibration, and troubleshooting of process control instruments and systems. Proficiency in working with field instruments, control systems, and safety protocols is essential.

Key Responsibilities:

• Install, calibrate, and maintain instrumentation systems in process environments.
• Troubleshoot and repair instrumentation issues.
• Ensure compliance with safety and industry standards.
• Collaborate with engineering teams for system upgrades and improvements.

Requirements:

• Proven experience in instrumentation within the process industry.
• Strong understanding of control systems, sensors, and measurement technologies.
• Knowledge of industry safety standards and procedures.
• Relevant technical certifications or qualifications.

If you meet these criteria, we invite you to apply and join our dynamic team.

Key responsibilities

• Inspect and examine aircraft components for leaks, cracks, breaks or other issues.
• Read and utilize maintenance manuals, illustrated parts catalogues, service bulletins and other maintenance documents to troubleshoot and complete work assignments.
• Maintain, repair, and rebuild aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, gaskets, and seals.
• Perform routine maintenance operations, such as the replacement of equipment’s and aircraft components.
• Interpret specifications, or diagrams to inform installation, development or operation activities.
• Perform regular inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments and wear.
• Complete all tasks in the allotted time frame and to the quality standards of our company.
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns.
• Order supplies, equipment, materials and parts for repairs and general maintenance.
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

Qualification / Expertise / Skills

• Minimum ITE holder or GCE ‘O’ Level or Aerospace Engineering.
• At least 5 years of experiences practical and documented aircraft maintenance experience.
• Those with experience on any of the following type B737,A320,Fokker 100 & ATR would be an added advantage.
• Knowledge in Base Maintenance activities would be an added advantage.

(Expected Commencement will be February 2025)

Responsibilities:

• Assist in troubleshooting, installations, calibration of the instruments
• Respond to client or customer service requests
• Remove defective Instruments from system, decontaminates, disassembles, and cleans instruments and replace defective parts using hand tools.
• Lubricates Instruments and replaces defective wiring and tubing
• Records calibrations made, parts and components used, and inventory of parts on hand

Requirements:

· NITEC / ITE or equivalent is required

· Minimum 3 years of relevant experience in a similar field

· WSQ Safe Lifting / Signalman / Rigger certification is advantage

· Compliance with company safety practices and procedures

· Basic knowledge in Mechanical and Instrument equipment is required

· Good reading, writing and verbal communication skill are required

· Willing to work at island wide customer sites

Responsibilities

• Inspect and examine aircraft components for leaks, cracks, breaks or other issues
• Read and utilize blueprints, maintenance manuals, ATA codes, illustrated parts catalogues, service bulletins and other maintenance documents to troubleshoot and complete work assignments
• Maintain, repair, and rebuild aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, gaskets, and seals
• Perform routine maintenance operations, such as the replacement of equipment’s and aircraft components
• Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications
• Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities
• Perform hourly, daily and monthly inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments and wear
• Complete all tasks in the allotted time frame and to the quality standards of our company, our customers and the FAA
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns
• Order supplies, equipment, materials and parts for repairs and general maintenance
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

Requirements

• Min NITEC/Higher NITEC/Diploma in Aeronautical Engineering or equivalent OR
• NITEC/Higher NITEC/Diploma in Engineering with relevant Aerospace experience
• Work location: Seletar
• Singaporeans only

Responsibilities:

• Assist in troubleshooting, installations, calibration of the instruments
• Respond to client or customer service requests
• Remove defective Instruments from system, decontaminates, disassembles, and cleans instruments and replace defective parts using hand tools.
• Lubricates Instruments and replaces defective wiring and tubing
• Records calibrations made, parts and components used, and inventory of parts on hand

Requirements:

• NITEC / ITE or equivalent is required
• Minimum 3 years of relevant experience in a similar field
• WSQ Safe Lifting / Signalman / Rigger certification is advantage
• Compliance with company safety practices and procedures
• Basic knowledge in Mechanical and Instrument equipment is required
• Good reading, writing and verbal communication skill are required
• Willing to work at island wide customer sites

Benefits & Location

Working location: Ubi Techpark and client sites

Working hours: 8.30am to 6pm (Monday to Friday)

Eligible for Overtime Pay

Please submit your updated resume with your expected salary.

Responsibilities

• Monitoring and basic troubleshooting response.
• Perform routine checks and monitoring of systems according to Standard Operation Procedure (SOP)
• Perform scheduled preventive maintenance works.
• Maintain proper housekeeping of all inventories and equipment.
• Comply to Site safety protocol, work procedures and SOPs
• Repair, service, maintain and test Audio Visual, Lighting and Sound equipment
• Ad-hoc duties as assigned by management

Requirements

• No prior experience required
• Able to work independently after short training
• A proactive attitude and willingness to learn
• Ability to adhere to instructions

Job Objectives

To perform effective component maintenance which includes inspection, operational test, repair, and modification (where required) of aircraft components.

Primary Responsibilities

• Perform the full range of repair duties on assigned components under the general supervision of the immediate superior
• Perform repair/overhaul/modification of components according to the requirements specified by relevant approved data
• Perform scheduled/unscheduled maintenance on aircraft components in accordance with manufacturer and other directives
• Perform troubleshooting, testing and operational checks on aircraft components
• Participate in product audit exercises (where/when necessary) to ensure that Satair’s practice/repair overhaul procedure is 100% aligned with the OEM requirement
• Collaborate (where/when necessary) with Customer Service, the OEM and Satair’s management to resolve issues concerning aircraft systems modifications and repairs
• Perform requisition of materials necessary for the jobs in accordance to specified procedures
• Receive training in specific core and secondary skills to enable multi-skill level work to be performed
• Carry out good housekeeping practices and observe all Health and Safety procedures

Secondary Requirements

• Participate in production planning exercises
• Participate in cross training efforts - technical training including recurrent training to other technicians
• Participate in HIRA (Hazard Identification and Risk Assessment) exercises as and when required
• Participate in new capability study and new capability set-up as and when requested to do so
• Participate in continuous improvement projects related to the workshop, specifically in the areas of test/repair engineering and other business processes at large
• Comply with Satair Group’s mission, values and Quality Management procedures
• Comply with Satair Group’s guidelines on Ethics & Compliance
• Understanding, sharing and living of Satair Group values and rules
• Respect Satair Group processes and procedures agreed per function
• Keep the direct report informed of the status of agreed tasks and of any critical problem areas
• Participate in optimizing Satair Group’s business procedures by applying existing Satair Group’s IT systems
• Comment/advise on unsatisfactory situations within the organization, and propose potential solutions for improvements
• Identify and offer suggestions to improve efficiency
• Be well informed about and familiar with the latest developments in Satair Group's business
• Have an inter-cultural understanding
• Participate in occupational safety and health efforts
• Contribute towards a positive and inspiring working environment

Job Requirements

• Minimum 3 years of relevant work experience
• Mechanical fundamental
• Working knowledge of English, both oral and in writing
• Computer literate - ability to learn new programs and understand all basic computer functions
• Preferred Knowledge of tools for SAP, email and databases
• Preferrred CAAS Air Legislation examination paper. Any of the following: M10, L11, L12 or CO1
• Preferred CAAS Paper B11 OR CAAS SAR-66 Papers CO2 and TM1
• Maintain relations across functions and with all stakeholders
• Ability to work in an international context
• Results and task focused
• Motivated and cooperative
• Proactive and flexible
• Attention to detail
• Ability to work under pressure
• Service orientated
• Inter-cultural understanding
  Attitude supportive of Satair values

Key responsibilities

· Test and troubleshoot instruments, components and assemblies using appropriate Test equipment.

· Test electrical equipment or systems to ensure proper functioning.

· Carry out Avionic Modifications including new wiring installations.

· Complete all tasks in the allotted time frame and to the quality standards of our company.

· Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns.

· Keep records of maintenance and repair work. Maintain repair or maintenance records.

· Order supplies, equipment, materials and parts for repairs and general maintenance.

· Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

· Carry out schedule servicing, and troubleshooting and defect rectification.

· Carry our good housekeeping and observe all Health and Safety Procedure.

· Any Ad-hoc assignment as assigned by Supervisor or Managers

Qualification / Expertise / Skills

• Minimum NITEC / Higher Nitec , Diploma in Aerospace Electronics / Aerospace Avionics
• At least 2 years of experiences practical and documented aircraft maintenance experience
• Those with experience on any of the following types; Fokker 100, ATR, E190 or B737,A320 would be an added advantage.
• Knowledge in Base Maintenance activities would be an added advantage

Job Responsibilities

• To carry out the day to day maintenance schedule assigned by the Technicians, Supervisor/Operations Manager.
• To check, maintain and plan smooth operations of all building services.
• To assist the Supervisor or Operations Manager to keep and update records of M&E installations and equipment in the building.
• To assist and monitor the performance of term contractors and contractors on call.
• To ensure proper accounting of all tolls, equipment and stocks.
• To maintain proper records of building plans, drawings and all M&E services including operational manuals.
• To ensure that all essential M&E plant rooms are checked. Maintained and properly secured.
• To attend to emergency arising from breakdown of malfunction of M&E services.
• To monitor and keep records of water and electricity consumption.
• Notwithstanding the above, you are required to undertake any other responsibilities assigned by the Management.
• 6 days work per week

Job Requirements

• Minimum 1 year Experience in Building/Facility/ACMV maintenance. Fresh candidate will also be considered. Training will be provided.
• G.C.E. or NITEC Certificate (Building/Electrical/Mechanical Engineering) or equivalent.
• Must be able to perform shift duties on weekdays, weekends & Public Holiday.
• Positive working attitude and a teamplayer.
• Salary package shall commensurate with relevant work experience. Please apply with your detailed resume with contact information with last drawn and expected salary.

Staff Transport available at Khatib and Sengkang.

Key responsibilities

• Inspect and examine aircraft components for leaks, cracks, breaks or other issues.
• Read and utilize maintenance manuals, illustrated parts catalogues, service bulletins and other maintenance documents to troubleshoot and complete work assignments.
• Maintain, repair, and rebuild aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, gaskets, and seals.
• Perform routine maintenance operations, such as the replacement of equipment’s and aircraft components.
• Interpret specifications, or diagrams to inform installation, development or operation activities.
• Perform regular inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments and wear
• Complete all tasks in the allotted time frame and to the quality standards of our company
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns
• Order supplies, equipment, materials and parts for repairs and general maintenance
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

Qualification / Expertise / Skills

• Minimum ITE holder or GCE ‘O’ Level or Aerospace Engineering.
• At least 5 years of experiences practical and documented aircraft maintenance experience.
• Those with experience on any of the following type B737,A320,Fokker 100 & ATR would be an added advantage.
• Knowledge in Base Maintenance activities would be an added advantage.

The dream of flying has always been a human fascination, evoking emotions and the sense of freedom. Modern business aviation attracts people who share that passion. People from all over the world converge at Jet Aviation, creating a unique cultural mix.

At Jet Aviation we continuously develop our employees, for they

are our most valuable asset. Jet Aviation as an international company offers numerous possibilities for development and opens reams of professional perspectives.

Responsibilities:

• All maintenance activities are performed in compliance with company policy and procedure
• Perform all maintenance activities as identified by engineer and/or in project plan including;

1. Maintenance
2. Aircraft preparation
3. Inspections
4. Troubleshooting

• Support assigned maintenance team to ensure aircraft projects are delivered
• Complete scheduled housekeeping activities to support safety and compliance

Requirements:

• Mechanical / technical knowledge within an industrial environment, preferably within aviation
• Demonstrated understanding of aviation regulatory and safety requirements performing aircraft maintenance.
• Ability to read and understand Aircraft Maintenance Manuals
• Higher ITE / Diploma / Foundation Degree in Aircraft Engineering
• PC literate with MS packages.
• Good team player

• Responsible for the colour matching and quality checks of various coatings products.
• Establish coatings formula using spectrophotometer or other colour matching techniques, blend and spray the colour match and perform any corrections when necessary.
• Responsible to manage and maintain global colour standards (BMS, Federal, internal working copies, etc).
• Be the focal point and colour representative for site’s “On-Colour” software.
• Responsible for all Quality Control functions including incoming material testing, process testing and analysis.
• Perform surveillance test and evaluation of sealants.
• Prepare test reports, certifies and release products for shipment.
• Support company’s goals and objectives, policies and procedures in compliance with quality management system (QMS).
• Assist in creating new procedures and work instructions to maintain and improve the QMS.
• Assume the role of key contact person for product quality issues.
• Maintain the inventory of all laboratory equipment.
• Adhere to laboratory procedures, safety rules and risk assessments.
• Other duties include preventive maintenance, managing calibrations of measuring equipment and maintaining a 5S housekeeping program
• Performs other tasks as assigned
• Initiative and able to work with minimal supervision.
• Ability to identify and correct colour shifts and associated colour problems.
• Well-versed in quality tools, problem-solving skills, statistical analysis tools will be advantageous.

Avionics Workshop Technician role reporting to Operations Manager performs critical Testing, Repair and Troubleshooting of Flight Control Actuations Electronics ensuring that final products are safe and meet customer expectations while keeping the repair process as effective and cost-efficient as possible.

Responsibilities include:

· Test, Repair and Troubleshooting Tasks

· Shop Process Control and Monitoring

· Safety Management and Human Factors

· Documentation and Data Input

· Preventive Maintenance of Equipment

· Continuous Improvement Initiatives

Entry level position with candidates undergoing extensive training and qualifications. Diploma or NITEC in an Aerospace/Aviation science or engineering discipline. Aviation background and experience preferred, aviation regulatory papers a plus.

• Analytical skills – need to be able to spot problems quickly and find the underlying causes so changes can be made
• Critical thinking – once problems are identified, solutions and improvements must be found. This might involve thinking about a process, procedure or problem in a completely new way.
• Attention to detail – as the people responsible for the technical work performed, as well as the people who notice and report on problems, every detail must be noticed and acted upon when necessary
• Numerical skills – statistical analysis and data analysis
• Communications skills – strong written and verbal communication skills are key. Must be able to relay potentially complex ideas to a wide range of audiences – both in personal consultations but also through company SOPs and technical documentation
• Team working skills – working as part of the operations team, and in close coordination with other teams throughout the facility (as well as potential for interaction with suppliers and customers)

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry.

Responsibilities:

• Able to set-up, operate and maintain Shot Peen/ Media Finish / Balancing machines
• Able to perform simple troubleshooting of machines
• Possesses Conventional machining, peening, inspection skills and knowledge
• Read and follow established procedures and work instruction
• Responsible for performing an assessment of risk of his/ her activities, taking corrective and preventive actions
• Require to maintain day to day 6s activities.
• Willing to work cross-functional areas.
• Compliance with Company Code of Ethics and Export regulation
• Support and participate in EH&S, Quality & CORE activities
• Involve in continuous improvement and cost saving initiatives
• Additional tasking as required by the supervisor

Requirements:

• Minimum NITEC in Precision/ Aerospace/ Mechanical Engineering
• 2 years of relevant working experience in Shot Peening/ Media Finish/ Balancing preferably in aviation industry
• Able to work weekly rotating shifts / permanent 2nd and permanent 3rd shift

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together”.

Key responsibilities

· Test and troubleshoot instruments, components and assemblies using appropriate Test equipment.

· Test electrical equipment or systems to ensure proper functioning.

· Carry out Avionic Modifications including new wiring installations.

· Complete all tasks in the allotted time frame and to the quality standards of our company.

· Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns.

· Keep records of maintenance and repair work. Maintain repair or maintenance records.

· Order supplies, equipment, materials and parts for repairs and general maintenance.

· Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

· Carry out schedule servicing, and troubleshooting and defect rectification.

· Carry our good housekeeping and observe all Health and Safety Procedure.

· Any Ad-hoc assignment as assigned by Supervisor or Managers.

Qualification / Expertise / Skills

• Minimum NITEC / Higher Nitec , Diploma in Aerospace Electronics / Aerospace Avionics.
• At least 2 years of experiences practical and documented aircraft maintenance experience.
• Those with experience on any of the following types; Fokker 100, ATR, E190 or B737,A320 would be an added advantage.
• Knowledge in Base Maintenance activities would be an added advantage