Job Descriptions:

• Use specialized equipment to test and validate cells, modules, and hybrid gearbox components under electrical, mechanical, and thermal stress conditions.
• Conduct complex destructive testing and collect data from various sensors.
• Perform post-testing teardown inspections and gather data for further analysis.
• Maintain and calibrate test equipment and data collection tools.
• Troubleshoot data acquisition systems and sensors.
• Collaborate with cross-functional teams on sample preparation, building, and instrumentation.

Job Requirements:

• Minimum NITEC/ Certificate/ Diploma in Automotive Engineering/ Mechanical or equivalent
• Valid Driving License
• Candidate with relevant experiences in handling passenger car is a plus

We regret that shortlisted candidates will be notified.

Name: Teoh Xue Ling

Registration No.: R22107190

EA License No.: 02C3423

Job Requirement

• Grow, maintain and transplant flowers, shrubs and trees
• Maintenance and installation of sprinkler systems
• Construct walkways, walls and small foot bridges
• Follows plans and specifications, inspects and directs the planting of landscape material associated with improvement, beautification, and erosion control
• Create and adhere to various watering and feeding schedules
• Plan new growth planting patterns in distinct seasonal changes
• Identify detrimental insects or plant disease and eliminate them
• Ability to adhere to a predetermined budget
• Operate a variety of mechanical equipment
• If certified or under the supervision of a certified applicator will apply chemicals

Requirement

• Primary/Secondary/’O’ Level Education with relevant landscape gardening experience.
• With WSQ Landscape Operation (Entry Level) Certification will be an advantage.
• No age limit with ability to work outdoors.
• Physically fit to handle tools and move around easily during work.

Working Hours and Office Location:

· 5.5-day work week

· Office location: Mandai Estate

· Work location: Various Sites

Responsibilities:

• Conduct product benchmark and qualification testing.
• Monitor product on-going reliability performance.
• Compiling and reporting of evaluation test results.
• Setting up, maintenance and calibration of test equipment.
• Participate in laboratory safety and quality management system audit
• Perform ad-hoc administrative works for Singapore Technical Centre (STC) laboratory including laboratory housekeeping, stock check and inventory of chemicals and consumables etc.

Requirements:

• Minimum Diploma in Electrical Electronic Engineering or related disciplines.
• At least 1-2 years of relevant work experience.
• Good team spirit and sense of accountability.
• Strong communication and interpersonal skills.
• Proficient in both English and Chinese languages as liaison with China and Hong Kong counterparts is required.
• Self-motivated, positive mindset and pro-active.

Job title will commensurate with qualifications and experience. Seasoned candidates with relevant experience may be offered an Assistant Engineer title.

About GP Batteries

GP Batteries International Limited is principally engaged in the development, manufacture and marketing of batteries and battery-related products. Since its establishment under Gold Peak Technology Group in Hong Kong, GP Batteries has rapidly expanded to become one of the world's major suppliers of primary and rechargeable batteries. It is one of the largest consumer battery manufacturers in China. It supplies an extensive range of battery products to original equipment manufacturers, leading battery companies as well as consumer retail markets under its own GP brand name.

GP Batteries' production facilities are located in China, Vietnam and Malaysia, supported by marketing and trading offices spanning across Asia, Europe and North America. The Group currently employs about 5,200 people worldwide and occupies a total floor area of approximately 307,800 square metres.

We offer attractive salary, fringe benefits and long-term career development opportunities to the right candidate. Interested parties, please upload your full resume (include current and expected remuneration package).

We are an equal opportunity employer. The information you provide will be treated in strict confidence and used for recruitment purpose only. You may visit us at www.gpbatteries.com for more information.

We regret to inform that only short-listed candidates will be notified.

Job Summary:

The service technician provides efficient after-sales technical services and support, including assembly, PDI, delivery and commissioning, trouble-shooting, maintenance and servicing of equipment and its related parts.

Job Description:

• To attend to, with urgency, all service calls and is responsible to provide efficient and reliable scheduled maintenance for all equipment. To ensure equipment is tested upon completion before handing over to clients.
• To, at all times, represent the Company in the best possible way, and to relate to clients with professionalism and integrity.
• To assemble, deliver and commission equipment at customer sites, and to train users on its operation.
• To observe safety precautions and to execute correct engineering practices at all times so as to minimise risk to self and others as well as damage to equipment and workplace.
• To maintain proper housekeeping and discipline both within the office floor and workshop as well as the client's work site so as to improve operational efficiency, whilst maintaining the good image of the Company.
• To be responsible to comply with the Group and Company Environment, Health and safety (EHS) policies and safe work procedures.
• To carry out service contracts which our company has with customers.
• To prepare parts recommendation of repairs to admin team for customers
• To assist the manager in seminars, workshop and product demonstration on ad-hoc basis.
• To complete service order as per completed job.
• To assist in improving and building up the Service unit to achieve the Company's objective of being a leading service provider in terms of its reliability and professionalism.
• To pursue and achieve total quality and competitive advantage through high degree of self-discipline, commitment and involvement at all levels of the organization as well as with its clients, suppliers and principals.
• Any other duties as assigned by the company.

Experience & Qualification:

• NITEC or Diploma in Automotive Technology, Mechatronics or Mechanical Engineering.
• Overhead crane service and repair experience is preferred.
• With Class 3 license is preferred.
• Able to work independently with minimum supervision.
• Technical knowledge in automotive repairs.
• Team player with good discipline and work attitude.

Roles & Responsibilities

The aircon technician will be involved in the maintenance, repair, and installation of different types of air conditioning systems. Aircon Technician will be involved in performing general maintenance services in households and offices all across Singapore, including washing aircon, diagnosing and rectifying issues in all brands and types of aircon, and installing and dismantling aircon. This role has the following responsibilities:
- Dismantle malfunctioning systems and replace worn out or defective parts.
- Perform chemical washes and chemical overhauls.
- Perform repair and maintenance on malfunctioning air conditioners.
- Perform general maintenance services on normally-functioning air conditioners.
- Prepare service reports after every completed job.
- Keep a record of job schedules.
- Pick up and deliver required materials and supplies as and when required.
- Communicate with clients with regards to problems in equipment and post-job reports.
- Perform any ad-hoc tasks given by supervisor or management.
This role requires the following skills
- Possess a CLASS 3 DRIVING LICENSE.
- Must be a confident driver and have experience driving medium-large-sized vans.
- Minimum 5 years experience working as an air conditioner technician performing chemical wash, general servicing, repairs, and installation.
- Experience working in CENTRALISED AIRCON SYSTEM maintenance is a big advantage.
- Confident at carrying out repairs and cleaning on all common aircon brands for wall-mounted, ceiling, casement, ducted, and portable aircon in Singapore including Daikin, Panasonic, Samsung, Mitsubishi Electric, Heavy Industries, Fujitsu, Toshiba, Carrier, and Europace.
- Able to speak and write basic English (excellent English is a strong advantage)
- Knowledge of electrical wiring.
- Able to do some heavy lifting and climbing.

- Willing to work on weekend shift

Summary of Job Scope:

To work closely with Microbiologist, Production, QC personnel and QA department to ensure all apparatus and end products are safe and free from any contamination.

• Perform QC checking, sampling and routine analysis of in-coming raw material.

• Operation of High Performance Liquid Chromatography (HPLC) and laboratory analytical instrument.

• Perform sampling, routine checking and recording of packaging material and printed packaging material (Label, leaflet, unit box, tube).

• Carry out sampling and testing for daily purified water system monitoring.

• Maintain and record retained sample of raw material.

• Maintaining and recording the temperature and room humidity in equipment room.

• On line checking and recording of in-process granules and tablet

• Checking and recording of in-process syrup, cream.

• Checking and approval of packing process.

• Daily stock card update for working standard.

• Perform identification test for in-coming raw material.

• Routine analysis and recording of raw material, intermediates and finished product.

• Carry out stability testing.

• Carry out dissolution profile test and monitoring.

• Carry out Analytical method validation.

• Carry out calibration/ performance verification of laboratory equipment/ Apparatus.

• Quality Control check on raw material dispensing.

• Ensure coding of labels and bar code labels are complete & accurate.

• Preparation and recording of reagents and chemicals.

• Preform analysis and support for working standard preparation.

• Maintain tidiness and cleanliness of laboratory equipment and workplace.

• Practice Good Laboratory Practice (GLP) and laboratory safety.

• Maintain QC document in laboratory to ensure up to date and accurate.

• Update laboratory equipment log book / Quality Control (QC) record book and all other QC documents.

Requirements:

• Diploma/ Degree in Chemistry or related field
• Able to perform independently in a fast paced environment
• Able to perform multi-task as assigned by superior
• No prior experience required (Fresh grads are welcome to apply)
• Must be able commit to OT and Night Shift (when necessary)

Responsibilities:

• Executing electrical preventive maintenance to maintain and sustain the food production equipment, facilities and electrical system.
• Supporting Engineers in setting up of the new equipment & systems and transfer equipment for new projects.
• Troubleshooting, maintaining and repairing equipment and electrical / electronic systems.
• Preventing fire and ensuring safety of personnel and equipment and preventing any incidents and accidents from possible electrical hazards.
• Implementing projects to improve energy efficiency for all of systems.
• Maintaining proper records for works of repairs, maintenances and projects.
• Exhibiting good work discipline and housekeeping habits, and adhering to all safety regulation and house rules at all times.

Pre-requisites:

• Minimum NiTEC in Electrical Engineering or related fields.
• Experience in manufacturing environment with handling machine repair and troubleshooting inclusive of preventive maintenance.
• Salary will commensurate with qualifications and experience.

Roles & Responsibilities

• Deliver professional nail services including manicure/ pedicure, extension and gel nail services
• Good excellent cleanliness and hygiene practices
• Recommending various nail designs and nail art to clients
• Evaluating the condition of clients’ nails and advising them on proper nail care and suitable nail care treatments
• Sanitizing all nail instruments and equipment before each use
• Ensuring that workstations are kept clean and orderly
• Ensuring that nail supplies are adequately stocked
• Advise clients on nail care and use of products and colors
• Promote and sell nail care products
• Schedule client appointments and accept payments
• Other duties as and when assigned

Requirements

• With or Without experience - Candidates with experience will be an advantage
• Able to work on weekends and PH
• Good communication skills and cheerful personality

Other Information:

• Good and comfortable working environment
• Annual leave and Medical benefits
• Basic Salary + Commission + Service point + Incentive

Purpose of the Position

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)
• To manage Linde Gas Singapore operations to ensure it is maintained safe, reliable, and efficient.
• The operations are to achieve key performance indicators (KPI’s) and annual plan objectives.

Responsiblities

• Accountable for compliance with safety, health, environmental, quality and relevant industry standards.
• Accountable for safe, efficient, and reliable operation of assets
• Accountable for investigating and trouble shooting process issues and outages
• Support process improvement, productivity and reliability projects
• Accountable for the planning, supervision, and execution of operation activities
• Accountable for compliance to all Procedures, Routines, Logs and other Operational Processes
• Accountable for meeting contractual and supply commitments
• Accountable for planning and executing TAR operational activities
• Accountable for controllable site costs
• Accountable for timely and accurate data reporting

Requirements

• ITE in Chemical Process technology /Diploma in Chemical Engineering or related discipline
• Min. 1 to 2 years Operational experience with demonstrable exposure to process plant operations and site-based activity or equivalent.

Responsible to set-up and operate CNC Machine Milling, Lathe

• Able to perform simple programming (For CNC machines only)

• Conduct first piece inspection

• Report to management in the event of non-conformance of components

• Adhere to good quality, housekeeping, and safety practices

• Perform 5S

Detailed

• Perform duties assigned by Engineering

• Check Routing Sheet details against drawings are correct before machining

• Maintain good housekeeping in the areas of work

• Always follow Company’s safe working practices and requirements

• Comply with safety measures and practices of the Company

• Report any unsafe conditions and practices to Production Superintendent or Engineering Assistant

• Ensure that a machining and inspection procedure is compiled to meet Quality Management System requirements and Quality Objectives

• Ensure adherence and compliance of the Quality Management System and achieve Quality Objectives

• Check raw material dimension before machining commencement

• Carry out the day-to-day machining operation in accordance with Routing Sheet and required date

• Perform 100% in-process inspection and recording inspection result

• Identity any non-conformance product and inform the problem to Production Superintendent or Engineering Assistant

• Check and report raw material defects / non-conformance before commencement

• Proper handling and usage of inspection devices and production machines/equipment

• Ensure job piece set-up and machining operation is in accordance with Routing Sheet and drawings

• Constant check on machining process and carry out in-process inspection to control the dimension according to customer requirements

• Maintenance and account for the inspection devices and tools issued for use

Requirements

• NTC 2 or 3 in Precision Engineering or equivalent

• Minimum 2 years of relevant experience

• Able to operate Fanuc Controller

• Experience in the machine applied for will be an added advantage

• Trainee positions available for interested parties without experience

• Able to read & interpret technical drawings

• Capable of using measuring instruments - Micrometre, Bore Gauge, Profile Projector

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

We are recruiting veterinary technicians to support the clinic’s operations. The main roles and responsibilities of the technicians are:

• Assist veterinarians with medical procedures and surgeries
• Communicate with customers to schedule appointment and explain prescribed medication for patients
• Conduct general cleaning of cages, animals, and the clinic
• Manage inventory of drugs and clinic general supplies
• Overnight nursing duties when required

We are seeking candidates who:

• Are self-motivated, and possess a positive attitude in overcoming challenges
• Take pride in delivering high quality work
• Enjoy working with people as well as animals
• Have an interest in continuing education and furthering your skills

As an employee of Vet Central, these are the rewards you can expect:

• To work in a safe, fun, and friendly environment
• To learn new skills from experienced vets, who are willing to teach
• On-the-job training opportunities
• Flexi-work hours
• Annual wage increment based on performance

Interested candidates, please email Vet Central at [email protected]. All applications will be kept private and confidential.

Working Hours: 7am-7pm; 7pm-7am

Roles & Responsibilities

Assist in the installation, operation, trouble-shooting, maintenance and repair activities of factory and office machineries and equipment, with an emphasis on automation machineries and robotic systems.

Specific Duties & Responsibilities:

• Support Principal Automation Engineer/Automation Engineer in providing technical support in computerized automation/robotic systems.
• Perform machineries and equipment installation, set-up, servicing, maintenance and repair job (both corrective and preventive), and ensure automation/robotic systems to remain in a validated and functional state at all times, including setting up or calibration check.
• Ensure that automation equipment are well maintained in good working condition to support production or engineering runs with minimum downtime.
• Ensure timely diagnosis, trouble-shooting and resolution of identified automation/robotic system issues (both hardware and software).
• Perform routine checks to monitor equipment operating parameters, prompt updating onto monitoring system to ensure operations are within control specifications, including setting up or calibration check.
• Prepare trouble report and be involved in work improvement projects.
• Perform any other duties as assigned by superior and/or management.

Job Specification:

• NTC 3/Diploma in Mechanical/Electrical/Mechatronics or equivalent.
• Understanding of electrical/mechanical/pneumatic schematics • Fundamentals in robot teaching
• Basic knowledge in PLC, HMI, and control system.
• Sensors selection and maintenance
• Minimum 3 years’ experience in process control/automation/robotic system solution in a manufacturing or related field.
• Knowledge Required: • Working knowledge in metal stamping industry is preferred. • Possess safety awareness in handling machine as well as basic safety knowledge in factory.
• Skills Required: Good trouble shooting skills • Hands on skills in mechanical, electrical & pneumatic matters • Good planning, supervisory, interpersonal and analytical skills • Ability to communicate technical/ complex information both verbally and in writing. • Perform multiple tasks concurrently and respond to emergency situations effectively
• Attributes Required : Able to handle physical work, reliable, honest, initiative, independent and good team player

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938 (Tan Jie Bei)

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

Roles and Responsibilities

• To carry out all preventive and breakdown maintenance for all Aircon equipment.
• Ensure safe keeping of hand tools and maintain good housekeeping.
• Ensure all works are carried out safely and/or in accordance with safety procedures.
• Provide technical advice and assistance on all maintenance functions.
• Any other tasks, when required by the immediate superior.
• Prepare service reports after every completed job for customer’s endorsement.
• Communicate with clients with regards to problems in equipment and post-job reports.
• Any ad-hoc tasks given by supervisor or management.

Requirements

• With at least Nitec in Mechanical / Electrical / Electronic or related field
• Candidates with at least 2 years of related experience will be at advantage
• Candidates with technical knowledge in ACMV equipment, switchboard, generators, and experience in BMS (Building Management System) and BAS (Building Automation System) will be of added advantage
• Positive attitude, good interpersonal and customer-centric skills
• Only Singaporeans may apply

Job Description:

1. Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission

2. Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.

3. Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.

4. Complete work order for each vehicle and unit serviced.

5. Adhere to defined guidelines in regards to safety, orderliness and etc.

6. Performs ad hoc duties as assigned by Superiors

Job Requirements:

1. Academic qualification: NTC 2 / Diploma Automotive Technology or equivalent

2. Competent in basic English (verbal & written)

3. Prefers candidates with at least class 3 driving license

4. Prior experience of at least 2 to 3 years in performing automotive service repair (commercial vehicle)

Job Description

• Performing maintenance, repair and overhaul work on vehicles, equipment
• Perform major repair on engine and transmission
• Adhere to defined guidelines in regards to safety, orderliness
• Perform Store receiving, verification of goods receive/Issuing out and storing of goods.
• Perform Store administrative work
• Manage store room inventory
• Provide technical support when necessary.
• Perform basic repair, inspection, reassembly, refitting, and adjusting products as required.
• Maintain work area clean, safe, and orderly.
• To perform any other adhoc tasks assigned.

Working Hours:

• 5.5 days
• 8am - 5pm / 9am - 6pm

Requirement

• Relevant working experience highly welcomed
• Positive attitude, willingness to learn and good team player
• Candidate must possess at least Primary/Secondary School/"O" Level in Others or equivalent.
• At least 1 Year of working experience in the related field is required for this position.

The job scope includes:

• Support laboratory operations by maintaining cleanliness, organization, and functionality of laboratory equipment and workspaces.
• Assist in conducting experiments, tests, and analyses under the supervision of laboratory staff.
• Procure laboratory supplies, equipment, and materials in accordance with project requirements and budgetary guidelines.
• Coordinate with vendors and suppliers to obtain competitive pricing and ensure timely delivery of procurement orders.
• Maintain accurate records of inventory levels, procurement transactions, and supplier information using designated software or systems.
• Assist in the development and implementation of procurement strategies to optimize cost-effectiveness and efficiency.
• Collaborate with laboratory personnel and project teams to identify procurement needs and recommend suitable products or solutions.
• Monitor and track the usage of laboratory consumables to prevent stockouts and minimize wastage.
• Adhere to safety protocols and guidelines while handling hazardous materials and operating laboratory equipment.
• Assist in other laboratory-related tasks and projects as assigned by supervisors or management

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Candidate must possess at least a Secondary School/Professional Certificate/NITEC, Diploma, Advanced/Higher/Graduate Diploma/Degree, any field.
• At least 1 year(s) of working experience in the related field is required for this position.
• Preferably Junior Executives or fresh graduate.
• Good communication skills and able to communicate with suppliers and internal department well.
• Excellent negotiation skills for best material/equipment/service pricing and payment terms from suppliers.
• Be driven, responsible, organized, independent and able to handle stress well.
• Able to learn fast, high attention to detail, and able to multi-task
• Basic Skills required: Proficient in Microsoft Office applications and multilingual skills (English & Mandarin)
• Possess positive working attitude, punctual, initiative and able to work productively under minimal supervision.
• Able to work under pressure and minimum supervision.
• Able to start immediately or at short notice is a plus.
• Able to work from 1:00pm - 10:00pm

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project.

We regret that only shortlisted candidates will be notified.

Our client is a global leader in gateway services, who is seeking to recruit an Engineering Technician. This position is based in Singapore.

Engineering Technician

Job Responsibilities:

· Plan, schedule and achieve workshop maintenance production for equipment and/or vehicles

· Manage in-house workforce, and/or outsourced contractor production/shift supervisors, and shift planning

Requirements:

• Comfortable with shift work

• Nitec/ Higher Nitec in Engineering

JJ Consulting Services

EA Licence No.: 12C6207

Applicants are invited to send in a MS Word resume to [email protected] stating position applying for/present/expected salaries and earliest available date.

We thank all applicants in advance and regret that only short listed candidates will be notified.

Responsibilities

• Responsible for the maintenance of XDC utilities systems, including chillers, boilers
• Perform planned preventive maintenance and emergency maintenance, ensuring all work is recorded in work orders.
• Conduct hands-on repair work as needed.
• Participate in project phases, including identifying discrepancies during walk-downs and leading utility commissioning phases.
• Update SOPs, URS, or other relevant documents as needed.
• Mentor and coach junior engineers to support their development.
• Perform other tasks as assigned by leadership.

Requirements

• Diploma or higher in Mechanical, Electrical, Automation, Pharmaceutical Engineering, or related fields; candidates with equivalent work experience are also considered.
• Ability to quickly learn and understand relevant codes and requirements.
• Strong communication and comprehension skills.
• A positive attitude, strong work ethic, and a willingness to follow leadership instructions.
• Openness to temporary work assignments, including overtime on weekends or weekdays, as needed.
• Ability to work independently with minimal supervision in a fast-paced environment.
• Strong multitasking and prioritization abilities.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Job Scope: Video Technician – Mediapro AV Pte. Ltd.

The Video Technician is responsible for setting up, operating, and maintaining video equipment for events, productions, and installations. This role demands technical expertise in video systems, strong problem-solving skills, and an eye for visual quality to deliver seamless video experiences.

Key Responsibilities:

1. Video Equipment Setup and Operation:

◦ Install and configure video equipment, including projectors, LED walls, cameras, and video switchers.

◦ Operate video systems during live events, broadcasts, or installations.

◦ Perform video checks to ensure proper alignment, resolution, and quality.

2. Content Management:

◦ Load, manage, and cue video content as per event requirements.

◦ Test and verify compatibility of video files with playback systems.

◦ Collaborate with clients or production teams to ensure content accuracy.

3. Troubleshooting and Maintenance:

◦ Diagnose and resolve technical issues with video equipment promptly.

◦ Conduct regular maintenance and cleaning of video systems.

◦ Repair or replace defective components to ensure operational readiness.

4. Video System Design and Integration:

◦ Assist in designing video layouts and setups for events and installations.

◦ Configure multi-screen displays and video mapping for complex setups.

◦ Collaborate with other teams to ensure seamless integration with AV systems.

5. Safety and Compliance:

◦ Follow safety protocols during installation and operation of video equipment.

◦ Ensure compliance with regulatory standards and company policies.

◦ Identify and address potential risks related to video operations.

6. Collaboration and Support:

◦ Work closely with lighting, audio, and staging teams to achieve cohesive AV solutions.

◦ Provide technical support during rehearsals and live events.

◦ Assist with the setup and teardown of video systems and other AV equipment.

7. Documentation and Reporting:

◦ Maintain records of video equipment inventory, setups, and configurations.

◦ Report on equipment usage, repairs, and replacements to management.

◦ Provide feedback for improving video workflows and systems.

Key Performance Indicators (KPIs):

• Visual quality and reliability of video outputs during events.

• Timely setup and operation of video systems.

• Minimal downtime caused by technical issues.

• Compliance with safety and operational standards.

• Client satisfaction with video performance and support.

This role is vital to delivering high-quality video experiences for Mediapro AV Pte. Ltd., ensuring smooth operations and client satisfaction in all projects.

Job Scope: Rigging Technician – Mediapro AV Pte. Ltd.

The Rigging Technician is responsible for the safe setup, operation, and dismantling of rigging systems used for audio-visual equipment, lighting, staging, and other event-related structures. This role requires technical expertise in rigging, adherence to safety standards, and precision to ensure the stability and

reliability of event setups.

Key Responsibilities:

1. Rigging Setup and Operation:

◦ Install rigging equipment such as trusses, motors, hoists, and cables.

◦ Position and secure lighting, audio, video, and stage equipment as per event requirements.

◦ Operate rigging systems during event setups, rehearsals, and live productions.

2. Safety and Compliance:

◦ Adhere to all safety protocols and guidelines during rigging operations.

◦ Conduct risk assessments and ensure equipment is used within safe working limits.

◦ Perform pre-event safety checks on rigging structures and equipment.

3. Maintenance and Inspections:

◦ Conduct regular inspections and maintenance of rigging equipment.

◦ Identify and address wear and tear or potential failures in rigging gear.

◦ Keep accurate records of equipment usage, inspections, and certifications.

4. Technical Collaboration:

◦ Work with lighting, audio, video, and staging teams to integrate rigging into event designs.

◦ Provide technical guidance on load distribution and weight limits for equipment.

◦ Assist in troubleshooting and resolving rigging-related issues during events.

5. Dismantling and Storage:

◦ Safely dismantle rigging systems after events and ensure proper storage of equipment.

◦ Ensure all rigging gear is accounted for and returned to inventory after use.

6. Documentation and Reporting:

◦ Maintain logs of rigging setups, equipment used, and safety checks performed.

◦ Report any incidents, equipment damage, or near misses to management.

◦ Suggest improvements for rigging procedures and equipment upgrades.

Key Performance Indicators (KPIs):

• Safety and stability of rigging setups during events.

• Timeliness in rigging installation and teardown.

• Compliance with safety and regulatory standards.

• Reliability and maintenance of rigging equipment.

• Collaboration effectiveness with other technical teams.

This role is critical for ensuring the structural integrity and safety of AV setups at Mediapro AV Pte. Ltd., contributing to the seamless execution of events and productions.

Job Responsibilities:

• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Multinational corporation
Basic + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Position Overview:

We are looking for an experienced AVL Technician/Manager to oversee our audio, visual, and lighting needs for events and productions.

Key Responsibilities:

• Setup & Operation: Manage setup, operation, and troubleshooting of AVL equipment.
• Event Coordination: Work with organizers to meet AVL requirements.
• Maintenance: Ensure proper maintenance and repair of AVL systems.
• System Design: Design and implement AVL solutions for events.
• Quality Control: Conduct regular quality checks on equipment.

Qualifications:

• Education: Diploma/Degree in Audio Engineering or related field.
• Experience: 1-3 years in AVL operations.
• Skills: Proficiency in AVL equipment, strong leadership, and excellent communication.
• Flexibility: Willingness to work flexible hours, weekdays, weekends, eve of public holidays and public holidays alike.

Benefits:

• Incentives for shows
• Professional development opportunities

Good To Have:

• Class 3/4 Driving License

Responsibilities

• Assist engineering teams with setting up test equipment for production and engineering.
• Manage sustaining of test and backend equipment (ATE, Bench, Handlers, Thermostream, Laser Mark, etc.).
• Perform test program correlations and reject verifications.
• Prepare and load test hardware for remote testing, including sanity checks.
• Conduct characterization or sample screening as per internal team requests.

Requirements

• Diploma or higher Nitec in Electronics, Electrical, Mechatronics, IT, Biochemical, Mechanical, Computer, or Architecture Engineering.
• Experience with HTOL support and ATE testers (Advantest 93K is a plus).
• Hands-on experience with test equipment (Handlers, Probers, Thermostream, etc.).
• Experience in semiconductor test facilities or production/engineering.
• Proficiency in Microsoft Office (Word, Excel, PowerPoint).
• Flexible to work staggered or night shifts as required.