Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description

• Lead and manage the instrumentation, control and automation engineering and design works.
• Ensure instruments, electrical and control designs compliance with customer specifications.
• Lead the team to provide technical supports to all instrumentation, control and automation works.
• Collaborate nternal stakeholders, clients, consultants, vendors and contractors.
• Handle equipment package and procurement including technical specifications preparation, technical clarification, technical bid analysis, etc.
• Work with cross function project team to support project activities, i.e. schedule, process, progress claims, etc.
• Coordinate, provide direction and support to the project team.
• Manage and supervise the site installation, inspection, testing and commissioning, plant proving related to Instrumentation, Control and automation system and interface works with other disciplines and other stakeholders.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all ICA related design, installation and Testing & Commissioning Works.

Requirements

• Degree in Electrical & Electronic Engineering / Instrumentation & Control Engineering / Advanced Diploma in Process Control and Instrumentation.
• At least 15 years of relevant experience
• Experience in Selection, installation and Commissioning of Instrumentation.
• Experience in system design, network design, installation and commissioning of the control and monitoring systems.
• Experience in Basic Programming of PLC/DCS and SCADA.
• Experience in Project Execution, Supervising and Coordination with sub-contractors, consultant and Client.
• Good technical knowledge in understanding instrumentation, control and automation system.
• Knowledge in electrical system and mechanical process system will be an advantage.
• Good technical understanding of water, wastewater and pollution control system.
• Relevant experience in design and site work for water and wastewater treatment works.
• Meticulous and analytical with excellent problem solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Job Description

• Hands-on service, repair and installation of switchgear components.
• Troubleshoot and rectification.
• Maintenance work
• Preparing of service report
• Provide quality responses, safety awareness and customer service skill.
• Performs special assignments and project as assigned.

Requirements

• Professional Certificate (e.g ITE/Nitec/Diploma) in Electrical/Electronic or Mechanical Engineering
• 1-2 years experience
• Able to work overtime
• Able to communicate in English

Responsibilities

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue

Requirements

• Experience in Windows server OS, Unix/Linux OS & VM environment
• Good knowledge and hands-on experience with Microsoft SQL Server would be an advantage
• Good Working knowledge with VPN, firewall appliances and Cisco routers/switches
• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment
• Pro-active, dynamic and with good analytical/conceptual thinking
• Fresh graduates are welcome to apply

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Lead Maintenance Engineer (HVAC & Purified Water Systems)

Our Engineers support internal and external manufacturing operations remain operational, continuously improve, and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

Lead Maintenance Engineer (HVAC and purified water system)

In this role, you will:

• Act as Subject Matter Expert (SME) in IPT Maintenance team with in-depth knowledge in Purified water system, HVAC, and Electrical & Instrumentation.
• You will take ownership for the HVAC and purified water system day to day support and continues improvement.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Lead Quality Risk assessment and develop a yearly trend for purified water system and HVAC system.
• Develop and implement maintenance program, preventive maintenance procedures and spare parts strategy for safe, reliable, and efficient operation of the systems/Equipment’s.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using our Production System.

Key Responsibilities:

Safety & compliance

• Lead or support investigation, participate in trouble shooting and root cause analysis for various operational events, and ensure that all relevant engineering CAPA are completed within agreed timeline.
• Provide support and actively participate in the site expansion project related to the HVAC and water systems, ensuring compliance with the company’s requirements.
• Lead and manage change control on project activities or act as technical advisor for system modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget, and qualification of facilities in accordance with site to approved procedures.
• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.
• Develop commissioning, qualification (IQ, OQ) activities are executed accordingly and in compliance.
• Maintain HVAC and Purified water systems are in optimum condition in compliance with Good Manufacturing Practice (GMP) & EHS requirements.
• Lead/participate in equipment failure troubleshooting and deviation investigations whenever required.
• Provide input during Basis of Design (BOD) and Detailed Design during large capital projects, applying good maintenance and reliability engineering principles whenever required.

Enhance and uphold maintenance quality.

• Implements technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies)
• Supports Maintenance Lead to meet Profit Plan targets, optimize maintenance and product standard cost effectiveness in accordance with cGMP and Safety guidelines.
• Responsible for improving the reliability of equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.
• Lead and perform Root Cause Analysis (RCA) for surfaced issues and implement a robust solution.

Operations excellence

• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program and also ensures that the work is done in accordance with schedule and specification.
• Regularly review and revise maintenance program and procedures to increase equipment reliability, reduce waste and improve overall asset care process & cost efficiency.
• Work with Engineering & Safety, Health & Environment (SHE) to execute a 'reliability-centric’ maintenance plan.
• Share best practices and lessons learned with the objective of improving asset utilization.
• Undertake activities to support realization of production, maintenance and product cost effectiveness with emphasis on equipment reliability and maintenance expenses.
• Conducts Maintenance effectiveness / optimization reviews along with IPT maintenance leads/Engineers/Technicians.

Continuous Improvements (CI)

• Utilize Lean methodologies such as 5S, Standard Work, real-time problem solving (RTPS), to support execution of continuous improvement activities.
• Support the development of continuous improvement framework and work with the Maintenance team to identify opportunities.
• Compile and review data and develops action plans for critical HVAC systems and Purified water systems to improve reliability and reduce M&R cost.
• Identify water and HVAC system repair and replacement projects, plan and develop schedules, acquire materials, prepare budgets, and develop an RFC for job execution.
• Effective project management ensures that jobs are completed on time, within budget,

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 5 to 8 years of maintenance work experience in Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Analytical and Problems solving skill with regard to Purified water system and HVAC Systems
• Knowledge in HVAC and Purified water system operation and Maintenance principle.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Knowledge of various clean room standards across the Pharmaceutical Manufacturing Industry will be an added advantage.
• Familiar with Life cycle of the HVAC system (from design, operations, controls monitoring, maintenance and obsolescence management).
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Demonstrated use of Reliability analysis tools such as FME, RCFA, etc.

Professional Competencies

• Resilient and resourceful
• Good oral/written communication and interpersonal skills
• Continuous learning mindset
• Foster team collaboration
• Strong work ethics

Job description

• Ensure the smooth operation and maintenance of the group IT systems.
• Maintain and update existing group systems in accordance with established processes and standards.
• Provide local support for the office, which consists of approximately 50 people.
• Monitor system performance and troubleshoot issues to ensure continuity of services.
• Implement and maintain security protocols to protect the company's IT infrastructure.
• Collaborate with other departments to understand their IT needs and provide appropriate solutions.
• Document system configurations, processes, and procedures for future reference.
• Proficiency in system administration tasks such as resources deployment, system updates, and troubleshooting.
• Excellent problem-solving skills and the ability to work under pressure.

Optional

• Experience with PowerShell scripting and/or Infrastructure as Code (Terraform)
• Knowledge of network administration and security protocols.
• Familiarity with other operating systems such as Linux.
• Experience with virtualization technologies such as VMware.
• Certification in relevant IT fields (e.g., Microsoft Certified: Windows Server, CompTIA Network+).

Interested applicants please send your resume to [email protected]

Venessa Goh Wee Ni

R24124686

Recruit Express Pte Ltd

EA License No: 99C4599

RCB No.: 199601303W

We regret that only shortlisted candidates will be contacted.

Optimum Solutions (Registration Number: 199700895N)is Singapore's leading Information Technology , Consulting and Professional Services company with Competence in Digital Transformation, Automation, Robotics, Cloud, Big Data, Analytics and Emerging technologies projects. Optimum has been successfully delivering IT projects since 1997 and has been a key IT service provider to clients delivering Software Design, Development, Engineering and IT Transformation Projects.

Job Description

Role : Actimize System Analyst (AML/Anti-Money Laundering)

Technical Require Skills:

• 5+ years IT experience is required.
• Working experience with Oracle PL/SQL,Oracle SQL is mandatory.
• 2+ years working experience with (AML) Anti-Money Laundering is mandatory.
• 1+ years recent working experience with Actimize tool/product is a must.
• Good to have: Batch Scripting, Control M, DevOps.
• Database (Ability to use and understand for the purpose of analysis and design an investigation)
• Analyse Requirements and form solutions for the application.
• Works with external application/user teams on E2E executions.

Technical Design:

• Responsible to create technical design
• Ensure technical designs adheres to architectural roadmap. Development practices and security requirements.
• In case of vendor implementation. Ensure vendor resources create technical design document
• Collaborate with developers and infrastructure teams to clarify functional specifications and technical design during build, test and deployment phase
• Collaborate with Production Support to establish IT operations procedures and document as part of Tech Design
• Coordinate execution of threat modelling process with assistance of Security Architect to ensure implementation of safeguards is comprehensive in accordance with threats

Domain- Banking

To carry out preventive / breakdown maintenance on all plumbing and sanitary systems of the Hotel.

• To operate and carry out preventive / breakdown maintenance on all mechanical equipment such as air conditioning system, freezer, refrigerators, pumps, coolers, ice-makers and other refrigeration equipment.
• To carry out painting, polishing and varnishing works at the Hotel.
• To operate and carry out preventive maintenance and repairs of all electrical installations and equipment such as generator, fire protection system lighting and power, etc. at the hotel.
• To assist in energy conservation programme and participate in fire-fighting and safety exercise.
• Any other suitable task as and when assigned by the Maintenance Officer / Assistant Chief Engineer.

Job Requirements

• At least 1 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): electrical work, mechanical work, painting

Job Responsibilities:

• To perform mechanical fitting job, machine assembly and maintenance, which requires knowledge of machine fits and tolerances
• To lead a team of technicians in preventive maintenance, checking and inspection, troubleshooting, repairs and overhauls of machinery and equipment having assigned and allocated resources to meet targets through planned and scheduled annual maintenance activities
• To carry out metal working for hot works
• To execute welding work
• To operate heavy machinery and perform lifting works
• To read mechanical drawing

Job Requirements:

• Candidate must possess at least secondary school education/ NITEC
• Past experiences in heavy industry/ metal fabrication shops/ machine maintenance will be preferred
• Candidate should possess basic knowledge of computer and data entry, and basic command of English (ability to read, write and speak)
• Able to work rotation shift and weekends

Work Hours:

• Monday - Friday, Shifts

Responsibilities

• Assist engineer to carry out all the Test related activities
• Support & implement different product configuration setup
• To test, analyze and perform troubleshooting on product failures
• Working closely with process and test engineers on yield improvement
• Participate in the Kaizen activities
• To update test tracking records
• Prepare and update Working Instruction
• To support the NPI Process and production runs
• Participate in ISO activities (implementation & maintain)

Requirements

• Nitec & above qualification in engineering with at least 1-3 years of working experience in testing and debug environment
• Good team player
• Ability to work with Peers, engineers, and superiors
• Able to multi-task & work under pressure
• Good understanding of test methods and concepts
• Knowledge of programming and debugging skills

RBA Compliance.

Position:Security Officers

• Able to commit 4 days work 1 day off, 3 days work 1 day off schedule.
• 12 hours permanent shift
• Location: islandwide
• Salary Package: $2,650 to $3,500 (Depends on experience)

Job Description:

• Incident Response, Manage Security & Safety Systems
• Prevent unauthorised entry into the premises
• Monitor CCTV
• Patrolling and clocking
• Access control duties

Requirements:

• Secondary education

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

1. Job Purpose

The incumbent will assist in supporting Population Health initiatives in the Western region. He/she will contribute towards the nationwide implementation of Healthier SG by evaluating the Western Region’s GP Network Performance to provide insights, identify best practices and track areas for improvement.

1. Duties and Responsibilities

• Drive Population Health initiatives in primary care
• Prepare regular dashboard updates by analysing data and tracking progress on indicators
• Perform advanced data analysis to identify meaningful trends and patternsCollate feedback from various sources to supplement the data
  Craft insights to guide our strategy to improve performance
  
• Prepare and check collated datasets for completeness and reasonableness before submission to relevant parties, or for audits
• Provide support to Quality Improvement initiatives and projects
• Any other duties assigned

1. Job RequirementsTertiary Education, preferably in Science, Engineering or Computer Science related fields
   Proficient in data analysis tool(s) such as MS Excel, Tableau, Power BI, SPSS, R, Python, QlikView, etc.
   Able to work independently and acquire necessary knowledge to perform tasks effectively. Prior healthcare-related experience will be an advantage
   Highly meticulous, attentive to details and timelines
   Possess an analytical and inquisitive mind for problem-solving, and the ability to identify / discern complex trends and patterns. Prior experience in Quality Improvement will be an advantage
   Good interpersonal skills and team player
   Good presentation skills
   

• Note: At times, you may be required to meet our partners on Saturdays and weekday evenings

We are seeking for part time/ adhoc pest control technician to join our team!

Working days: adhoc

Job Scope:

• Perform pest control treatments and inspections at clients' premises such as F&B and residentials.

• Provide relevant advice to clients during inspection

• Provide service report

• Maintain pest control equipment in good working condition.

Requirements

• Pest Technician licence
• personal transport
• experience working in Pest company

Interested candidates may watsapp to 82336017.

• Assist with daily site inspections of all Mechanical & Engineering systems and technical equipment, including servicing and maintenance.
• Ensure the site's environmental conditions provide a safe work environment.
• React to Building Management System alarms, and complete emergency repairs as needed.
• Work with third-party vendors, ensuring compliance with company-developed processes, procedures, and all applicable laws and regulations.
• Alert management if subcontractor performance doesn’t meet all requirements per the Master Service Agreement.
• Complete planned preventative maintenance (PM) and reactive maintenance on all equipment.
• Check BMS for running and alarm conditions and respond to HVAC-related client problems.
• Building walkthroughs, taking meter readings from UPS, PDU’s and utilities.
• Provide fixes to facility and plant faults and defects.
• Complete assigned work according to established processes and procedures. Follow all safety processes and requirements and ensure al regulatory requirements and quality standards are met. Conduct routine quality checks for comprehensive maintenance records.
• Complete all required training to ensure successful completion of all job-related responsibilities.
• Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion.
• Impact through clearly defined duties, methods, and tasks are described in detail.
• Deliver own output by following defined procedures and processes under close supervision and guidance.

What You’ll Need:

• Training in a Technical discipline having served an apprenticeship or equivalent with 1-2 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered. Ability to work shifts that may include weekends and holidays
• Must be able to Meet the physical requirements of this role.
• To effectively present information to an internal department, client, management and/or colleagues.
• Ability to follow basic work routines and standards in the application of work.
• Communication skills to exchange straightforward information.
• Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
• Strong organizational skills with an inquisitive mindset.
• Basic math skills. Ability to calculate simple figures such as percentages, discounts, and markups.

JOB DESCRIPTIONS:

• Carry out routine inspection and maintenance on company’s construction equipment
• Dismantles defective equipment and install new or repaired mechanical and electrical parts
• Handles & follows up on equipment issues such as repair & maintenance of electrical and mechanical equipment
• Carrying out mechanical and electrical maintenance, repairing and servicing tasks
• Supervise installation / renovation / replacement works on facilities and equipment which are carried out by vendors / contractors and ensures all works are carried out appropriately
• Troubleshoot and perform minor repairs on M&E services & installation for the building, which includes but not limited to general handyman work in fitting, installation, electrical wiring, plumbing, painter, carpentry and etc.
• Install, test, and commission mechanical and electrical systems and equipment, including heating, ventilation, air conditioning (HVAC), plumbing, electrical wiring, and other critical systems.
• Liaise & supervise the appointed contractors / Term Contractor for any maintenance, repairs and / or renovation works and to ensure standard of work is performed
• Communicate effectively with clients, supervisors, or contractors regarding system status, repairs, and timelines.
• Support foreman / manager in supervision of night site works, ensuring that safety regulations are adhered to when carrying out maintenance works
• Co-ordinate job site activities to consistently meet timeline, customer / client job requirements, SOPs, and statutory regulations
• Carry out any other duties or instructions assigned by the Management

JOB REQUIREMENTS:

• N/O Level/ Higher /Nitec/ Diploma
• Preferably with atleast 5 years of relevant experience in a similar capacity
• Required to work hands-on and in Non-Aircon environment
• Able to be on standby after office hours for any technical / electrical works default.
• Possess knowledge of cable & wiring, AC/ DC drives & inverter motors
• Candidates must have class 3 driving licence. Need to travel from time to time for business needs.
• Able to interpret blueprints, technical drawings and sketches to calculate requirements
• Knowledge on mechanical, electrical and building system, including using of hand and electrical tools
• Regularly inspect and monitor mechanical and electrical systems to detect any performance issues or wear.
• Must be able to read technical manuals and drawings
• Must be able to meet the physical requirements of the job which include bending, lifting heavy equipment and working in confined spaces
• Ability to work in physically demanding conditions and handle equipment with precision.
• Must be able to work shifts, weekends and public holiday when necessary
• Able to manage multiple projects within the scope of work and stay on task
• Able to work well under pressure with minimal supervision

Job Description:

• To record daily output data and submit to leader.
• Setting up machines during changeover of part.
• Trouble shoot production related quality issues.
• To attend daily morning briefing conduct by leader and provide status update.
• To communicate on the status on each machine before shift hand over.
• Ensure own responsible machines to be warm up before start of shift.
• To report any scrap or technical issue to leader faced during processing.
• To ensure respective in-charge machines are fully utilize.
• Inform leader if machine is faulty/down to avoid delay in delivery.

Prerequisites:

• Minimum ‘O’ Levels, Higher Nitec/Diploma in Engineering (Mechanical/Electrical/Electronics), or its equivalent.
• Minimum 2-3 years of working experience in production environment preferred.
• Experience in setup and operating single point diamond turning machine.
• Preferably some years of work experience in related or relevant work experience in optics manufacturing.
• Must be able to understand and communicate in English.
• Able to carry heavy items (segments or tooling).
• Willing to perform rotating shifts.

Our client specializes in controls design, including conveyor controls, tooling controls, process controls, vision system integration, and UL-certified control systems is in search of

Electrical Panel Wiring Technician - West

Responsibilities

• Physically mount components using the appropriate hardware.
• Use both power and hand tools to fabricate steel panels and enclosures
• Assemble and wire electrical components based on provided schematics.
• Neatly route and bundle wires/cables for proper organization.
• Perform other duties as assigned by supervisor.

Requirements

• Minimum Nitec and above or its equivalent
• Ability to read and interpret electrical schematics preferred
• Knowledge of electrical standards is advantageous.
• Ability to work both independently and within a team

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected]stating your current and expected remuneration together with notice period required to current employer.

EA License No: 12C6254 | EA Personnel Registration No: R1879665

Your Mission

This role centers on developing a state-of-the-art, software-driven factory designed for autonomous and adaptable production of future mobility solutions. The role requires expertise in deploying scalable, real-world applications. Responsibilities include designing and reviewing architectures for diverse use cases, establishing foundational environments, and implementing solutions using the most suitable technologies.

What To Expect

• Analyze and assess requirements for deploying digital, AI, and simulation projects at scale.
• Design and architect solutions using IoT (ThingWorx/Kepware), cloud infrastructure (AWS, Azure, GCP), AI, Data Science, MLOps/LLMOps, and Simulation (NVIDIA Omniverse).
• Identify necessary skills, resources, and timelines for successful system implementation.
• Manage development processes and ensure systems are maintained effectively.
• Provide technical leadership and serve as a bridge between Digital Transformation teams and Data/IoT engineers.

What You'll Bring

• Bachelor’s degree or higher in Computer Engineering, Electrical Engineering, Computer Science, Industrial Engineering, or a related field.
• At least 8 years of hands-on experience in system architecture and development; 13 years or more is advantageous for senior roles.
• Proven skills in software architecture design, network interfacing, and data pipeline development. Knowledge of OT devices is a plus, as best practices are applied across the IoT stack.
• Expertise in Software Architecture, Network Diagrams, Data Flow Diagrams, Interface Protocols, and Linux OS.
• Proficiency in scripting languages like PowerShell and Bash.
• Experience with cloud services (AWS, Azure, GCP), database management (Oracle, PostgreSQL, InfluxDB), IoT platforms (ThingWorx, Litmus), communication protocols (OPC/UA, MQTT, Kafka), and Data Science tools (Databricks, Snowflake).
• Technical skills in Docker, CI/CD/CT pipelines, C#, Java, Spring Boot, and Vue.js.

• Preventive and corrective maintenance of Building Management System, Energy management System
• Development of Functional Design Specifications, Software Design Specifications, Control Schematics/Write-up and other software/test documentation.
• Handle application programme change management, hardware deployment management & documentation
• Implantation of PLC/SCADA project from concept to design and programming
• Site Testing and Commissioning with clients.
• Interface design, implementation and testing between various third-party systems
• Meeting with clients, reports and documentation
• Capable of performing troubleshooting independently
• Implement improvement works to clients.

Requirement:

• Diploma or Degree in Engineering (Electrical/ Electronics/ Automation / Building Technology).
• Experience in interfacing design, implementation and testing between various third-party systems using Modbus, BACNet or other protocols will be an advantage.
• 2 years’ working experience in building ACMV systems / PLC related experience.
• Must have Mitsubishi PLC programming experience
• Knowledge of SCADA (Niagara N4 or Mitsubishi MC Works) is an advantage.
• Have worked with Building Management System/SCADA/HVAC system is an advantage.
• A resourceful individual with good organization, time management and problem-solving skills.
• A team player and at the same time able to work independently in a fast-paced environment.
• Able to work during weekends or night jobs occasionally when required.
• Competitive remuneration package will be offered to the shortlisted candidate.

Why Us?

• Office Environment
• Work-Life Balance
• Opportunities for training, development and career progression.

The Role:

• Administer and maintain the day-to-day operations of the servers & networking system.
• Organise, install and support organisation's computer systems including LAN, WAN, network segments and intranet.
• Monitor system performance and troubleshoot issues to ensure continuity of services.
• Implement and maintain security protocols to protect the company's IT infrastructure.
• Provide IT support to end users.
• Collaborate with other departments to understand their IT needs and provide appropriate solutions.
• Document system configurations, processes and procedures for future reference.

What are we looking for?

• Degree in Computer Science, Information Technology or any related field with at least 1 year working experience in IT
• Applications with Diploma in Computer Science or any related field with at least 5 years working experience in IT may also be considered.
• Knowledge of networking protocols and services such as MS Azure.
• Familiarity with other operating systems such as Linux.
• Experience with virtualization technologies such as VMware.
• Certifications in above knowledges will be an added advantage.
• Good analytical problem-solving skills with innovative approach in providing solutions.
• Competent at documenting standard/application operating procedures, process, and work instructions.
• Good communication skills and a team player

Next Step:

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Garrett Lim Jun Jie, R24122758

EA Licence No: 24C2293

JOB Advertisement :-

Role : Software Developer (GIS experience)

Minimum Experience 5+ Years in :-

• Programming Languages: C#, Python, Pandas, HTML, CSS

• Scripting Languages: ArcGIS JavaScript API, JavaScript

• Database/RDBMS: PostgreSQL, Oracle

• Platforms: Sublime Text, Anaconda, Visual Studio Code, VS

• Others: Google Cloud

• GIS & Image Processing Software: ArcMap, ArcGIS Online, ArcGIS Pro, ArcGIS Server, ArcGIS Portal, Geo Server.

• GPS: Leica GPS & DGPS, Trimble, Garmin GPS, Total Station.

• Experience in features like SLD, GIS data editing and maintenance. Utilized ArcGIS Pro 3.0.3, ArcGIS Utility Networks 6, ArcGIS Enterprise 11, and MS SQL Server 2019.

• Support business activities for ESRI ArcGIS platform.

• Responsible for integration testing, Application testing, regression testing.

• Requirement gathering and customer engagement

Responsibilities

· System Engineering Design

· Generating Test Plan & Procedures

· Sourcing and Procurement of System Hardware

· Planning and Setting up Test Lab

· Conduct Factory Acceptance Test

· Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites

· Perform Troubleshooting and Resolving System Faults

· Perform On-Site Acceptance Test

· Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

· Degree in Electrical & Electronics Engineering / Computer Science or equivalent

· Minimum 2 to 3 years working experience in industry

· Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred

· Computer literate e.g. MS office, Visio

· Excellent Oral and Written Communication Skills

· Excellent Time-management

· Good Learning Capability

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

As a Senior IT Sales Executive, your focus is on selling technology solutions, services, or products, such as software, hardware, cloud services, cyber services and IT consulting to customers.

This role involves understanding client needs, positioning relevant technology solutions, and driving revenue growth for the company.

Below is a detailed job scope:

Sales Strategy & Planning

• Develop and implement sales strategies tailored to the IT industry, focusing on key technology solutions like software, hardware, cloud services, cyber services or managed IT services.
• Identify target markets, customer segments, and potential business opportunities in the IT sector.
• Set sales goals and targets for IT products/services, ensuring alignment with overall business objectives.

Client Acquisition & Relationship Management

• Identify and pursue new business opportunities by acquiring new clients and expanding existing relationships.
• Build strong, long-term relationships with key decision-makers (e.g., CIOs, CTOs) in client organizations.
• Conduct meetings, presentations, and demonstrations to showcase the value and ROI of IT products or services.

Technical Knowledge & Solution Selling

• Maintain in-depth knowledge of the company’s IT offerings, including software solutions, hardware products, cloud computing, cybersecurity, and IT infrastructure.
• Understand customer requirements and present tailored IT solutions that address business challenges.
• Collaborate with technical teams to deliver solutions that meet the specific needs of clients.

Sales Pipeline Management

• Develop and manage a robust sales pipeline, from lead generation to closing deals, using CRM tools.
• Track and manage sales metrics, forecasts, and opportunities to ensure sales goals are met or exceeded.
• Prepare and submit proposals, negotiate contracts, and close high-value IT deals.

Market Research & Competitor Analysis

• Stay updated on the latest IT trends, emerging technologies, and industry developments.
• Analyze competitor products, pricing strategies, and sales tactics to refine the company's sales approach.
• Provide insights on market needs and opportunities to drive product innovation and development.

Cross-Functional Collaboration

• Work closely with the marketing team to develop campaigns that support IT sales initiatives.
• Collaborate with technical teams to ensure seamless integration of IT solutions and services into client environments.
• Coordinate with customer support and account management teams to ensure customer satisfaction and retention.

Contract Negotiation & Closing

• Lead the negotiation of contracts, pricing, and terms of agreement for IT services and products.
• Manage the legal and contractual aspects of sales deals, ensuring compliance with company policies.
• Close high-value IT sales deals and ensure successful delivery of products and services.

Revenue & Profit Growth

• Achieve and exceed monthly, quarterly, and annual sales targets for IT products and services.
• Contribute to the company’s overall revenue growth by expanding sales in existing accounts and acquiring new clients.
• Optimize sales profitability by managing pricing strategies and controlling sales expenses.

Customer Relationship Management (CRM)

• Use CRM systems to manage customer data, track sales progress, and maintain an accurate sales pipeline.
• Regularly update client information and track interactions to provide personalized and effective follow-ups.
• Provide reports and updates to senior management on sales performance and market trends.

Training & Development

• Stay current on the latest IT products, trends, and services through continuous learning and training.
• Share industry knowledge with the sales team and help train junior sales executives on solution selling and industry best practices.
• Attend industry events, conferences, and webinars to network and stay updated on new IT innovations.

Customer Satisfaction & Post-Sales Support

• Ensure a smooth post-sales process by coordinating with the delivery and technical support teams to implement IT solutions.
• Manage customer expectations, ensuring high levels of customer satisfaction and retention.
• Address and resolve any issues related to the product or service post-sale.

Reporting & Analysis

• Prepare regular sales reports to monitor progress, identify areas for improvement, and track performance against targets.
• Analyze sales data and customer feedback to refine strategies and improve the overall sales process.
• Report sales results and market insights to senior leadership and contribute to overall business strategy discussions.

Overview

The job-holder is responsible for the quality of patient care delivered and the standard of nursing practice in an assigned ward/unit. S/he provides highly skilled and specialized nursing care to specific patient population and their caregivers.

Job Responsibilities

Primary Responsibilities:

· Assesses, plans, implements and evaluates care of patients with complex healthcare needs according to updated standards of nursing practice

· Ensures patient care delivery (inclusive of education and counselling) is carried out according to established standards of care practice using patient care plan / clinical pathways

· Co-ordinates patients’ access and treatment sequence where required for the specialty

· Conducts teaching and counselling for patients and their families / carers

· Initiates and ensures implementation of discharge planning for patients

· Leads and participates actively in the review of patients with the multidisciplinary team

· Follows up on patients at NUH specialist outpatient clinics where appropriate

· Conducts specialty nurse-led clinic for patients and their families where needed

· Provides clinical supervision to nurses and nurse trainees to ensure quality patient care delivery

· Updates and maintains patient consultation / training statistics / other types of register / registry where appropriate

· Applies understanding of prevention of medico-legal issues in relation to patient care

Secondary Responsibilities:

· Acts as a resource person for clinical nursing matters

· Plans, implements and evaluates in-service staff education and specialty training courses based on unit and individual training needs

· Inducts newly graduated advanced diploma nurses in specialty care of a specific group of patients

· Guides and develops specialty competencies of registered nurses

· Reviews and develops clinical pathways and / or other plans of care in consultation with specialty nurses, nurse managers, doctors and paramedical staff

· Reviews and develops practice policies and guidelines and nursing standards in consultation with specialty nurses, nurse managers and doctors

· Assists with nursing audits on nursing care standards

· Applies best evidence to practice

· Participates in research activities

· Undertakes quality improvement / research projects

· Participates in training / quality improvement / research committees

· Contributes to performance appraisals of enrolled nurses, senior enrolled nurses, staff nurses, senior staff nurses and advanced diploma nursing students

· Takes on additional responsibilities or tasks as assigned by Senior Nurse Manager/Clinician, Deputy/Assistant Director (Nursing) and Chief Nurse

Requirements

· Registered Nurse with at least 9 years of post-registration clinical experience, of which 2 years must be as Assistant Nurse Clinician

· Diploma in Nursing with relevant post-basic advanced certification and Degree in Nursing from recognized training institution as approved by Singapore Nursing Board.

· Technically skilled and competent

· Good interpersonal and communication skills

· Computer literacy skill – MS Word and PowerPoint

As a Patient Service Associate, you will deliver friendly and efficient customer service and create a warm and welcoming atmosphere for all internal and external customers / patients, with the key aim of providing excellent patient care and satisfaction.

Duties & Responsibilities

• Ensure clinic’s operational readiness

• Register patients and book appointments accordingly

• Perform cashiering duties, attend to and manage patients’ enquiries

• Provide chaperone assistance to doctors/nurses and prepare consultation documents

• Assist clinic/nurse manager in administrative duties

• Perform any other ad-hoc duties and responsibilities that may be assigned from time to time

Requirements

• Candidate must possess at least “O” Levels/Diploma

• Proficient in computer skills

• Team player with good communication and interpersonal skills

• Able to multitask and work in a fast-paced environment

• Candidates should be comfortable/flexible with working in a hospital setting and in different clinics when needed

If the role sounds interesting to you, please contact ‘[email protected]’ to understand more on the role. Please indicate the position that you are interested in the subject heading.