Automotive Engineering Technician

1) Singapore class 3 driving license and able to safely operate any light commercial vehicle.

2) Prior knowledge of and able to perform automotive maintenance practices safely, accurately and independently (preferably certified, Nitec or equivalent).

3) Be ready to cover the full duties of any technician at our customers’ workshop sites, including our mobile service, when required.

whatsapp : +65 9837 1821

Job Description:

• Handle Vehicle Diagnostic Tools & Update e-Repairs Documents ,
• Repair or Replace Parts , Oil & Fluid Levels , Wheel Bearings , Car Aircon Compressor Charging , Vehicles.Engine Repair.
• Report to Workshop Maintenance Controller or Team Leaders

Requirements

• Candidates Should Possess A Local Diploma / ITE In Automotive Technology or Mechanical Engineering
• 3-5 Years Experience In the Similar Field With Vehicle Distributors
• Requires A Valid Class 3 / 3A Driving License
• Mondays to Fridays : 0830 to 1730 Hours

- No Quota for WORK-PERMITS ***

Responsibilities

• Perform calibrations and adjustments to meet required standards.
• Set up instrumentation and equipment as needed.
• Conduct fault finding and repairs on equipment.
• Interpret and execute calibration requests from both internal and external customers.
• Provide technical support and product information to internal and external customers.
• Communicate promptly with laboratory management regarding potential or actual issues that require action.
• Liaise with customers to address inquiries and deliver support effectively.

Requirements

• O Level / NITEC in electronics, electrical, mechatronics or mechanical engineering
• Previous experience in service, repair and calibrate a wide range of torque measuring equipment
• Candidates with no experience are welcome to apply.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

• Responsible for setting up, maintaining, and troubleshooting automated testing systems used to evaluate the performance of electronic devices.
• Involves programming test sequences and analyzing test results to ensure product reliability and compliance with specifications.
• Focuses on testing entire systems or subsystems to verify that all components work together as intended.
• Involves using various testing methods to assess functionality, performance, and interoperability.
• Specializes in stress testing electronic components by operating them at elevated temperatures and voltages to accelerate aging and identify potential failures.
• Responsible for setting up and monitoring HTOL test conditions, collecting data, and analyzing results to improve product reliability.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Provide routine, preventive and corrective maintenance, troubleshooting and overhaul on process equipment such as piping, pressure vessel, pump, compressor, etc.

• Diploma or NITEC in a relevant Engineering discipline
• At least 3 years' relevant experience in an oil refinery/petrochemical plant
• Candidates without relevant experience may be considered for entry-level positions.

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As a Technician LS1, you will be responsible for overseeing manufacturing operations.

In this role, a typical day will include:

· To operate manufacturing equipment to produce and/or package contact lenses.

· To operate autoclave to sterilise contact lenses.

· Ensure contact lenses are manufacturing to the best quality level possible.

· Perform activities in compliance to Good Manufacturing Practices in a controlled and regulated environment.

· To ensure compliance to Data Integrity such that information is attributable, legible, contemporaneous, original and accurate.

· Perform all production activities at various stages under cleanroom environment and to work as a team with cross-functional team member to achieve production targets in compliance with cGMP, quality and safety requirements. Handle production tasks and ensures daily target and highest product quality are achieved.

· To maintain the quality standard of Contact Lens manufacturing

· To meet the yield, equipment performance and uptime of the LTs being assigned

· To perform IPC (in process check) such as Visual Lens Inspection and Operator Packaging check.

· To schedule contact lenses to be sterilised within 12 hrs.

· To perform simple machine setup eg Ink change

· To support maintenance activities and troubleshoot machine issues

· To maintain 5S in the production floor

· To participate in Kaizen project for continuous improvement in manufacturing performance

· Perform GxP cleaning and production end waste disposal.

WHAT YOU’LL BRING TO ALCON:

· NITEC in Engineering with 1-2 years of working experience in manufacturing

· Comfortable to assist in pushing of rolling carts that weighs 300kg.

· Perform inspection of lenses under increased lighting and magnification.

HOW YOU CAN THRIVE AT ALCON:

· Good team player

· Enjoy working with various cross functional team across manufacturing site

Alcon Careers

See your impact at alcon.com/careers

(Technical Specialist/ Equipment technician/ Manufacturing Technician/ Production/ Maintenance Technician/ Engineering Assistant/ Assistant Engineer/ Service)

1 vacancy - Afternoon Shift: Mon - Fri 3pm - 11pm / Sat: 1pm-7pm

• Permanent Position / MNC/ Near Woodlands MRT/ Urgent Hiring!!
• AWS, Annual Leave, Medical & Dental Benefit
• Attendance Allowance + Shift Allowance, OT
• Training will be provided

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• To carry out repair & maintenance of in-house Production Automation Machines
• To provide support to ensure production machines & equipments is repaired timely.
• To attend to unforeseen machine breakdown.
• To carry out Preventive Maintenance (PM) as scheduled.
• To support all Automation Integration.
• To recommend improvement to enhance Productivity & Yield.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers
• Prepare the automation documents, reports and records on daily basics

Requirements

• NTC in Engineering-related discipline, preferable in Mechanical/Electrical/Electronics/Plastic technology.
• 1-3 years relevant experience in Machine repairs and maintenance
• Good team player with positive working attitude

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Our client is a tank storage company.

• Perform preventive and corrective maintenance, ensuring quality and safety standards.
• Ensure compliance with safety regulations and manage permits like JSA and LOTO.
• Oversee work orders, support contractors, and mentor junior technicians.
• Contribute to process improvements, supervise projects, and lead equipment training.

Requirements:

• ITE in Maintenance Engineering or equivalent.
• At least 2 years of experience in maintenance, inspection work, and terminal equipment and assets.
• Well-versed in terminal equipment, assets, and fire-fighting and emergency procedures.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Jason Marine Group Limited is a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Technician/ Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing of navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Trailer Repair Technician
• Working Location: Benoi
• Working Hours: 6 days (Mon-Fri 8.30 am-6.30 pm, Sat 8.30 am-5 pm)
• Salary Package: Salary $1,500 + OT + Meals + Accommodation + Transportation + tea break
• Duration: Permanent Role

Key Responsibilities

• Perform repairs and maintenance tasks on trailers to ensure they are in good working condition.
• Inspect trailers for mechanical issues and fix any problems related to performance, parts, or safety.
• Follow maintenance schedules to keep trailers functioning optimally.
• Report any major issues that need further attention or require additional parts to the supervisor.

APPLY NOW!!!

• Experienced with car repair.
• Experienced with trailers/trucks is an advantage.
• A team player who can collaborate, delegate, and lead technicians to meet daily work goals.
• Positive attitude and willingness to learn.
• Detail-oriented with a strong focus on customer satisfaction.
• Meals provided daily.
• Accommodation provided.
• Free company transport between the dormitory and workshop.
• Daily tea break from 3:00 PM to 3:15 PM.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69944 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description & Requirements

Position Summary/Overview:

• The Data Center Operation technician has overall responsibility to support the troubleshooting and coordinating activities pertaining to the day-to-day support of the data centers and critical facilities. responsible for troubleshooting, managing the vendors/contractors and report to the Data Center Operation Site Lead.

Responsibilities:

• Lead a team of contractors or vendors and support in the daily data centre operations
• Perform data centre operations and inspections including monitoring and management for infrastructure systems, DC environment and facilities
• Monitor critical facilities and infrastructure system alerts and perform necessary escalation
• Perform incident management and escalation pertaining to any facilities and system downtime
• Manage and administer the service desk operations
• Ensure the implementation of safe systems on site activities.
• Liaison with BUs in regard to utilities, building services / facilities and systems issues
• Assist in the planning and execution of disaster recovery activities
• Administer and ensure building records, licenses, permit and etc are properly documented.
• Ensure procedures, processes and service level are being followed for any service delivery and operations
• Periodic review of the data centre operations and report any gaps and issues
• Prepare and update of Data Centre and Service Desk monthly report
• Maintain the site asset database, provide updates in accordance with CMMS requirements.

Education & Experience:

• Possess a Diploma in Computer Science or equivalent
• Possess Data Centre Certifications such as Certified Data Centre Professional
• Possess at least 3 years’ experience in Data Centre Operations, Facilities Monitoring & Management
• Familiar with Data Centre facilities including Computer Room Air-Con (CRAC), fire suppression system, water detection system, Uninterrupted Power Supply (UPS) and etc
• Familiar with Service Desk operations and incident management process
• Basic understanding on the operation of MEP systems
• Resourceful, analytical and problem solving skill
• Good communications and interpersonal skills

Reports To: Head Veterinarian / Practice Manager

Location: 77 Lucky Heights, Singapore 467626

Employment Type: Full-Time

About Dr Paws Vet Care

We are a small, first opinion, general practice clinic in close proximity to Siglap, Bedok, East Coast, and Marine Parade. We see dogs, cats, rabbits, guinea pigs, chinchillas and hamsters.

We are equipped with

- IDEXX blood test machines - Digital radiography - Ultrasound machine

- Dental suite (including rabbits/rodents) - Surgical suite – Acupuncture

We are looking for a dedicated Veterinary Nurse to join our team. If you have a passion for animal care and are interested in working in a clinic that combines traditional and alternative therapies, we would love to meet you!

Key Responsibilities

• Patient Care
• Diagnostic Support
• Surgical Assistance
• Client Communication
• Animal Restraint
• Administrative Support
• Clinic Maintenance
• Emergency Care
• Team Collaboration

Qualifications

Required:

• Excellent communication skills and the ability to build rapport with clients and team members.
• Compassionate, empathetic, and professional attitude toward both animals and their owners.
• Ability to work both independently and as part of a collaborative team.
• Singaporeans or PRs only

Preferred:

• Diploma in Veterinary Technology
• Prior experience in the animal industry

How to Apply

Please send your resume, cover letter, and any relevant certifications to [email protected].

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

About the role

To support R&D department in conducting laboratory tests, sample preparation and executing technical and quality control documentation/testing while co-ordinating with various departments to ensure smooth running of the organisation.

Roles & Responsibilities

Sample Preparation

• Receive and label all raw materials brought into the lab for accountability.
• Maintain inventory of chemicals.
• Prepare materials for experiment and assist R&D activities..
• Assist R&D Engineer to conduct experiments and operate equipment.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• 
  

Measurement & Calibration

• Perform periodic calibration of equipment and reporting of any malfunctions.
• Assist in troubleshooting and maintenance of all testing equipment.
• Ensure proper housekeeping of laboratory on a daily basis.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Perform Laboratory Data Analysis and Reporting

• Recording and reporting of experimental results and trends.

Quality Control

• Perform in process quality check and physical test on in-process materials & finished products
• Testing of properties of aerogel products and co-ordinating with 3rd party laboratories.
• Prepare QC documents for all batches in production department

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Assist workplace safety initiatives.
• Implement and manage waste disposal and coordinate with chemical disposal companies.

Requirements

• ITE / Diploma in Chemical Engineering, Chemistry, Biotech, Lifesciences and Pharma etc.
• Years of work experience: At least 1 - 3 years.
• Training will be provided.
• Knowledge of safe handling of chemicals
• Possess basic computer skills and Microsoft Office applications.
• Team player and able to work independently

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Qua_Ctrl in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, details of your educational background and work experience.

whatsapp: 85986715

汽车零件维修员工

薪水：$1800(根据经验 面试可和老板谈)

时间：9am-6pm（周一到周五）(周六9am-2.30pm）(12am-1pm吃饭，3pm-3.15pm喝茶)

地点：靠近woodland

Auto parts repair TECHNICIAN

Salary: $1800 (based on experience, interview can be negotiated with the boss)

Time: 9am-6pm (Mon-Fri) (Sat 9am-2.30pm) (12am-1pm for dinner, 3pm-3.15pm for tea)

Location: Close to Woodland

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Electronic Repair Technician (Aviation)
• Working Location: Seletar – Nearest MRT: Khatib
• Working Hours: Monday to Friday, 8.30 am – 5.45 pm (May need to work Saturdays depending on duty)
• Salary Package: Up to $2700
• Duration: Permanent

Key Responsibilities

• Regularly inspect, test, and troubleshoot avionics systems, including radar, navigation, communication, and flight control systems, ensuring they function correctly and comply with safety standards.
• Use specialized diagnostic tools and software to identify electronic malfunctions or system failures, isolating faults to efficiently carry out repairs.
• Conduct repairs, replacements, and adjustments to aircraft electronic systems such as autopilot, radio systems, GPS, and onboard computers.
• Install new electronic equipment or upgrades, such as advanced communication systems, navigation aids, or flight control systems, ensuring they integrate properly with existing aircraft systems.
• Inspect and repair aircraft wiring, ensuring proper electrical connections and shielding to prevent system failures or electrical fires.
• Calibrate, test, and adjust avionics instruments and sensors, ensuring the accuracy of crucial systems like altimeters, airspeed indicators, and flight data recorders.
• Log all diagnostic tests, repairs, installations, and inspections accurately in the aircraft's maintenance records to ensure compliance with aviation regulations and company policies.
• Follow all relevant aviation safety regulations, including FAA, EASA, or local aviation authority guidelines, ensuring all electronic systems meet strict airworthiness and operational standards.
• Ensure that avionics systems are running the latest software versions by performing regular updates and troubleshooting new software issues that may arise.
• Monitor and maintain the integrity of the aircraft’s electrical power supply to avionics systems, ensuring uninterrupted power flow and system reliability.
• Conduct post-maintenance checks to verify that repairs have been completed properly and the aircraft is ready for flight.

APPLY NOW!!!

• Min. a Diploma in Aerospace Engineering or related
• Min. of one (1) year of relevant work experience
• Training provided for candidates with no experience
• Candidates with CAAS Aircraft Maintenance Certificate Preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70290 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Engineering and Trading firm
• Position Title: Assembly Technician
• Working Location: North – Woodlands Industrial Park
• Working Hours: 5 days / Monday to Friday: 8.30am-5.30pm
• Salary Package: Up to SGD 3500 + Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for assembly, debug and test run of customized modular machines and it’s commissioning.
• Provide on-site technical support at customer premise for equipment operation.
• Perform design modifications through: Simplified design, reduced parts, using cheaper alternatives, while maintaining or enhancing the performance of products in terms of cost reduction.
• Procure and/or assist in the procurement of necessary items to enable the performance of above duties.
• Writing and maintenance of all necessary documentations, work and assembly instructions, manufacturing and test procedures.

APPLY NOW!!!

• Min. ITE in Mechanical Engineering
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD as well as experience in machine design are added advantages

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71420 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

SIA Engineering is recruiting a number of positions for our Singapore Operations located in Changi ( East side of the island ).

Available roles include the following :

1. Aircraft Technicians ( B1 )
2. Avionics Technicians ( B2 )

Requirements :

• Applicants who applied for the above role must have experienced in similar role(s) in other companies.
• Must have relevant Engineering qualifications
• Must have necessary supporting documents/certifications to prove qualifications
• Willing to work in Singapore
• Ability to speak and write in English language is compulsory
• Immediately available candidates are welcomed

Shortlisted candidates would be contacted for an online interview.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

A) The collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

B) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Element has an opportunity for a Senior Test Technician to join our rapidly expanding team. As a member of the operations team, the Senior Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

Job Duties:

• Carry out oil sampling at customer site located around the island
• Work together with a team mate and a customer's representative to the various electrical installations for the sample collection
• Other tasks include disposal of waste oil, packing of oil samples for freight, housekeeping and etc

Job Requirements:

• Familiar with workplace safety and health requirement
• Work at height is required
• Possess a valid Class 3 driving licence
• Able to work independantly with minimal supervision and a team player with good communication skill
• Able to understand customer requirement and perform work in accordance to customer specification

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Roles and Responsibilities:

• Perform daily operational activities which includes attending to customers' enquiries, needs and complaints
• Perform preventive and breakdown technical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers, and electrical control Working in Grade A Commercial Buildings

Requirements:

• Nitec in Mechanical / Electrical or related field
• Candidates with 2 years or more related experience in Facilities Management will be an added advantage.
• Positive attitude, good interpersonal and customer-centric skills
• Shift work required (3 shifts: Morning, Afternoon and Night)
• Working Location: CBD

We are looking for new colleagues! Are you a Veterinary Technician or Nurse who has registration with professional veterinary associations (American/ Australian/ British/ Canadian) with work experience in a specialist referral hospital/ advanced or general practice?

Start a conversation with us via [email protected] if you have the following credentials:

• Degree, Diploma or certification (American/ Australian/ British/ Canadian) in Veterinary Technology/ Nursing relevant studies.
• Minimal 5 years of work experience in anesthesia/ cardiology/ diagnostic imaging/ ECC/ internal medicine/ oncology / ophthalmology/ radiology or surgery within a clinical practice.
• 2 years prior team management experience preferred.
• A team player with excellent interpersonal and concise communication skills.

Work scope:

• Live and exemplify the Five Principles of Mars, Inc. within self and team.
• Be the extra eyes, ears and hands for the veterinarian to ensure the best quality pet care and to maximize the veterinarian’s productivity.
• Lead communications with veterinarians and veterinary medical team to maintain the flow of pets.
• Provide professional, efficient and exceptional service at all times. This includes performing procedures that do not require veterinarian assistance, completing preparatory work for other procedures, ensuring that clients and pets are comfortable in the hospital, and monitoring hospitalized or surgical pets.
• Obtain relevant information and history from clients to maintain proper and complete medical charts.
• Ensure the safety of pets, clients and associates by utilizing safe restraining techniques, following standard protocols while maintaining clean, sterile and organized treatment areas, exams rooms and labs.
• Educate clients about preventive care, pet health needs, any diagnosis or treatment, hospital services and other related matters.
• Assist with surgery as applicable.
• Utilize technical skills to the fullest, within mandated regulations regarding duties of credential veterinary technicians.
• Other job duties as assigned.

Aircon Repairman TECHNICIAN

A little experience is required

Medium Worker (Basic Salary $1600-1800 + OT)

Head Hand (Base Salary $1800-2000 + OT)

Have a class 3 driver's license salary ($2000-2500+ depending on experience), can speaking simple chinese and english

Working hours: 9.30am-6.30pm

Location: Red Hill

Job Summary

The purpose of this position is to perform field technical work in delivering installation, maintenance, troubleshooting, testing, and repair work for the business.

Key Responsibilities

• Assist to perform the preventive maintenance and corrective work for building services, assets/installations at the client’s premises according to local statutory regulation, HSE, and client’s site-specific requirement, etc.
• Assist to ensure the completion of work orders within the standard KPI/SLAs and the client’s needs are met.
• Support a plant/building shutdown or critical event for the purpose of any preventive maintenance/repairs relating to the assigned asset or equipment and other related operating functions, such as housekeeping, security cameras and access controls, etc.
• Assist to perform regular inspections and inventory of tools, vehicles, and equipment used on the agreed cycle.
• Assist to close the service requests from customers within the service level agreement
• Assist Prepare and submitting a timely incident report
• Assist in follow-up scheduling of equipment daily/weekly maintenance work or a job request.
• Make recommendations to the management on ways to improve the facilities.
• Assist with any additional/ad-hoc duties as assigned by superiors as and when the need arises

Required Knowledge and Skills

Technical Knowledge & Experience:

• Minimum Three year experience in building facilities or related environment
• Welcome fresh Nitec/Diploma holder
• Knowledge in Mechanical/Ventilation and Air Conditioning (MVAC) System, Building M&E services functions are an added advantage
• Possesses strong leadership and interpersonal skills, self-motivated, problem-solving skills and able to communicate well at all levels
• Must be a team player, and have a sense of responsibility to meet the objectives of the organization
• Hands-on experience on mechanical and electrical troubleshooting.

Communication:

• Excellence in English
• Ability to work in a team environment and be independently motivated.
• Ability to respond effectively to the most sensitive issues.
• Ability to write technical reports or manuals.

Qualifications and Education:

· Possess at least a NITEC in Electrical or Mechanical Engineering or any related field

· Possess a valid Class 3 Singapore Driver’s license compulsory.

Machinery Mechanic/Technician

Job Description:

• Good job knowledge of marine heavy Equipment Mechanical works, troubleshoot, remove re-installation and repair works (Such as Cranes, motors, generators, and pumps etc.）
• Good job knowledge of Heavy Equipment Electrical work, troubleshoot and repair Equipment Electrical related matters.
• Attend Breakdown
• Provide technical assistance to service operations
• Other ad hoc duties assigned by supervisor/management

Benefits Summary:

• Up $2500 + OT + Bonus + Benefits
• 5 Days work week
• Working Location: West
• MNC with good working environment

Responsibilities:

• Repair, maintenance and troubleshoot EV & heavy commercial vehicles
• Inspect and fix a vehicle’s electrical system
• Perform automotive care tasks like checking fluid levels, rotating tires and changing oil fluids
• Read & understand electrical schematic diagram and use the multimeter & insulation meter to measure voltage, etc
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6593839640

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Edward TOH

Registration No: R1658602

EA License No: 20C0278