Job Description

• Support the Pharmacist in dispensing medications prescribed by the doctor and managing supplies.
• Assist with inventory and supervise interns and Pharmacist Assistant
• Maintain tidy and systematic with proper upkeep of pharmacy equipment and drug storage
• Assist in the preparation of compounded medications.
• Ensure compliance with regulatory standards and pharmacy policies
• General administrative duties

Requirement

• Singaporeans Only

• Min Diploma in Pharmacy Technician/Pharmaceutical Sciences or relevant

• Min 2 years experience in pharmaceutical care and practice

Check out www.abercare.sg for more details

Interested applicants may send in your resume to [email protected]

Abercare.sg | EA License No. 18C9070 | KOH SU WEN, CLARISSA| Registration No. R24119504

Job Overview

• The incumbent ensures that facilities are safe and functional by performing preventive and corrective maintenance activities. He/She conducts technical troubleshooting for mechanical and electrical issues in compliance with the quality and safety standards, regulations and organisational WSH practices.
• He/She is a problem solver equipped with the required technical knowledge for managing facilities operations and maintenance.
• He/She works at designated sites and is deployed to other properties or locations.

Responsibilities

Manage Facilities Operations

• Perform preventive and corrective maintenance works according to quality and safety standards, procedures and regulations
• Conduct technical investigation in response to fault calls
• Complete documentation on procedures and schedules of maintenance works
• Draw consumable and non-consumable items when required
• Liaise with third party service providers on maintenance or repair works
• Provide summary reports on preventive and corrective maintenance works

Drive Safety and Sustainability

• Comply with regulatory and organisational Workplace Safety and Health (WSH) policies and practices
• Report accidents, near misses and incidents in accordance with WSH reporting practices
• Ensure compliance with Environmental Management System(EMS) standards and practices
• Ensure compliance with environmental sustainability regulatory and organisational requirements

Drive Continuous Improvement Activities

• Engage in continuous improvement initiatives to improve time, cost and quality management
• Provide inputs on the use of latest smart facilities management trends or technologies

Requirements

• Minimum NITEC in Electrical/Mechanical or any equivalent
• Able to work independently on given task
• Motivated and result oriented
• To be able to work well in a team setting
• Able to read and understand basic English

Duties and Responsibilities

• Monitor and analyze electrical systems
• Test devices for improvement, safety, and quality control
• Update older electrical systems for changes, cost reductions, improvements, safety, and quality control
• Repair broken equipment and wiring
• Perform and analyze tests to track results and make improvements
• Work with builders and make recommendations
• Perform calibrations for wire placement and electronic components
• Responsible for all required electrical qualification tests on projects and ensure compliance with all outside parties involved
• Participate in test runs and meet safety regulations
• Modify systems to be environmentally friendly

Job Position: Technician (Full Time)

*We are regret to inform that only shortlisted candidates will be notified*

EA license no: 12C6255

EA Reg.id: R1660688

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

COMPANY DESCRIPTION

MINDS has been caring for Persons with Intellectual Disabilities (PWIDs) and their families since 1962.

Grounded in the belief that all PWIDs have innate abilities and talents, MINDS is committed to empowering them and enhancing their quality of life, while advocating for greater inclusivity for PWIDs as a nation.

MINDS is today one of the largest charities in Singapore employing more than 850 staff. With the key focus to expand community-based services, improving the employability of PWIDS, strengthening education, and engendering inclusive community living, MINDS offers a holistic range of services and programmes across the PWIDs’ lifespan.

These include schools, employment and training development centres, home-based care services and community-based services to cater to the physical, psychological, environmental and social needs of PWIDs. For more information, please visit www.minds.org.sg.

RESPONSIBILITIES

• Responsible for overall IT infrastructure stability, resilience and performance including physical and virtual servers and network resources.
• Responsible for ensuring appropriate IT infrastructure capacity to ensure optimum operational performance for the organisation.
• Coordinates and works with resources (internal and external) to meet established project milestones and to achieve project deliverables.
• Identifies areas for improvement, develop an improvement program and monitors the implementation to increase process efficiency.
• Recommends suitable technology infrastructure updates to develop long-term and short-term planning.
• Assists in developing IT budget for IT infrastructure.
• Develop plans for implementation of new projects, perform Project Management.
• Participates in evaluations, recommends and plans implementations of new technologies and platforms to determine alignment with business’s needs.
• Manages resource availability to continuously support the business, including backup administration.
• Reviews all new and updated processes and procedures introduced into the production environment to ensure SLA compliance for both outsourced and internally managed services. • Participates in the development, maintenance and testing of disaster recovery plans as required & implements improvements.
• Provides mentoring and support to Business and Usual (BAU) ICT Executives.
• Manage response to alerts and notifications of after-hours activity.
• Travel to branches as required.
• Off-hour support as required.

• Degree Computer Science or Technology related studies

• Preferably with some years’ (8-10) experience in IT management level of similar sized structure and business, hands on experience and technical knowledge of applications and communications infrastructure
• An added advantage for those familiar with ITIL

Job Summary

You will be working with a team of professional engineers to challenge status quo, think different, thrive in ambiguity to meet mission objectives of our customers. You will lead a team of software engineers and work closely with other cross functional teams, Service Delivery Managers and Project Managers to deliver quality satellite ground software systems to our customers.

Job Responsibilities

• Drive the design and architecture of satellite ground control and antenna management software systems.
• Lead software team in implementing design, testing, verification, and validation of all software components.
• Implementation of cybersecurity measures for software applications
• Generate and maintain software development documentation.
• Plan and provide necessary software maintenance, training, and consultancy to users on the deployed software.
• Continuously develop new skills & techniques in software technologies to improve and reduce software development time and effort.
• Participate in the definition and development of future products.
• Collaborate with various stakeholders including customers, and engineering teams across organizations.
• Able to challenge the status quo, think different, thrive in ambiguity, care for team members and being ever curious.

Job Requirements

• Knowledge in Computer Engineering or related field.
• At least 8 years’ experience in mission critical system software development.
• Proficient in developing full stack applications, preferably with C#, JS.
• Experience with database, API design, network architecture, message broker, and cloud technologies.
• Experience with core engineering infrastructure tools such as GIT servers, CI/CD pipelines, Container Technologies.
• Familiar with agile software development lifecycles.
• Good understanding of hardware.
• Able to communicate in English and work in a fluid, innovative environment.
• Singaporean only

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

• Report directly to the Project Director/Manager overseeing the WTW system.
• Project Support: Provide technical expertise for the design, development, and construction oversight of the WTW system.
• Coordinate with WTW system designers, vendors, and fabricators, including reviewing drawings, sourcing equipment, and managing cost and schedule control.
• Project Execution: Lead project implementation to meet specified requirements and objectives. Responsibilities include schedule tracking, vendor sourcing and recommendations, cost assessment, resource allocation, addressing inquiries, clarifying technical aspects, supervising project activities, implementing corrective measures, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Troubleshooting and Repair: Diagnose and resolve issues in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Accurately document all changes, maintenance activities, repairs, and inspections.
• Develop operating, maintenance, and safety procedures for the WTW system.

Requirements:

• Bachelor's degree in Mechatronics or related field.
• Minimum of 5 years of experience in the marine industry or shipyard environment.
• Solid understanding of deck machinery, including winches, cranes, lifting and handling equipment, as well as familiarity with IACS rules and regulations (especially ABS, DNV, BV).
• Specific experience in WTW systems (Offshore Passenger Transfer System) is an advantage.
• Strong knowledge of mechanical principles, hydraulic and electrical systems, and P&ID, with proven troubleshooting skills.
• Strong leadership and problem-solving abilities, with knowledge of structural design as a plus.
• Teamwork: Demonstrated ability to work collaboratively with team members at all organizational levels.
• Communication: Clear and effective communication skills for interacting with team members, vendors, fabricators, and clients.
• Proven ability to write reports and deliver presentations in English, with Mandarin skills being an added advantage.
• Software Proficiency: Skilled in MS Office, MS PowerPoint, MS Project, Adobe, and AutoCAD. Familiarity with Primavera scheduling software is a plus.
• Solid knowledge of document control processes, with experience in ISO9001:2015 QAM systems being advantageous.
• Must be willing to travel and work in marine and offshore environments.

Service Technician

Salary: $1, 500 - $2, 000
Working Days: Monday - Friday 8.30am – 5.30pm
Location: Kwong Min Road (Boon Lay)

Job Responsibilities:

• Knowledgeable in servicing and maintenance for refrigeration / electrical machines.
• Identifying faults, troubleshoot, and repair various commercial kitchen equipment.
• Performing repair jobs promptly and efficiently.
• Submitting of daily report for servicing & maintenance functions.
• Ensure all documents are updated upon completion of work
• Ensuring all works comply with the appliance standards and Health and Safety Act.
• Perform equipment quality compliance check.
• Work closely with direct superior to maximize repair rates.
• Maintaining service vehicle in good condition.
• Maintain the work bay and workshop areas in orderly and safe working conditions and exercise good housekeeping practice.
• Any other duties as assigned.

Job Requirements:

• Hands-on experience in installation, maintenance, troubleshooting and/or repairs in electrical machines and mechanical diagnostic skills.
• Possess a valid Singapore class 3 driving license is preferred.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Service Engineer

Location: Tuas (Company pick up available - West & North)

Salary: $3,000 - $4,000 + OT + AWS + Performance bonus

Working days: Monday - Friday

Working hours: 8:30am – 4.30pm

Job Description:

• Product delivery training to distributors and customer
• Provide diagnosis guidance and analysing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.
• Willingness to work beyond office hours if required and any other ad-hoc duties assigned from time to time.

Requirements:

• Diploma and/or certificates in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess valid Class 3 Driving License

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Key Roles and Responsibilities

• Carry out operational tasks to upkeep plant such as gas check at site, data downloading, isolation, issue permit as per SOP etc.
• Perform SCADA data monitoring and logging in NABS system
• Perform system alarms monitoring for FM200, gas and flame detector on annunciator panel
• Conduct gas quantity nominations and reports checking/monitoring
• Supervise maintenance work activities for CM & PM works
• Field check and plant monitoring including End Users and Customers. Weekly routine check and the monthly visual inspection check at site
• Perform meter data download/collection for customers during billing submission
• Perform flow monitoring and control on flow control valve and meter
• Communication and coordination with Upstream supplier, End Users, EMA/PSO, Power Gas and KAM team.Be part of the emergency response team
• Any other job assigned by Shift Manager

Qualifications & Experience

• Minimum Diploma Engineering in Mechanical or Instrument with at least 3 years of experience in Oil and Petrochemical industry
• Class 3 driving license will be an advantage
• OPSOC, WAH, Confined space supervisor, CERT & first aider certificate will be an advantage

Preferred Skills & Characteristics

• Possess good attitude and willingness to learn
• Good Team player
• Able to communicate effectively
• Self-motivated

Description:

• Completing and reviewing work assignments and adjusting workload and resources periodically with the team.
• Mentoring and cross-training staff with a standardized training program and documentation.
• Implementing required quality management systems to ensure customer work scope, results, and team performance meet approved SOPs and organization's safety and quality requirements.
• Participating in cost, quality, and efficiency improvement initiatives driven by the Team Lead.
• Coordinating and ensuring timely calibration of laboratory equipment.
• Maintaining good laboratory housekeeping with the team.
• Perfume compounding and material selection as per formulation.
• Updating compounding information in the Electronic Lab Notebook.
• Ensuring clean tools are used for weighing.
• Preparation for odor evaluations.
• Maintaining End-to-End (E2E) service of material management.
• Supporting the shipping of compounded materials with complete shipping documents.
• Operating and maintaining the Contexa robot

Requirements:

• Min. Diploma in Applied Chemistry / Perfumery and Cosmetic Sciences / Chemical Engineering
• Min. 1-2 years of working / internship experience in a chemistry laboratory environment

Location: Buona Vista

Working hours: Office hours, Mon to Fri

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Lab Technician (Quality Control/ LIMS/ Contract/ Entry Level)

Location: Benoi

Salary up to $3300

1-year contract (Renewable)

Main Functions:

• Support/assist the lab supervisors/chemists by performing routine and non-routine laboratory analysis/wet chemistry on product and in-process samples, to support plant operations for the purpose of quality assurance/control.
• Perform calibration and maintenance of test equipment.
• Prepare samples and ensure accurate data generation and records, in accordance with the standard operating procedures.
• Utilize analytical instruments to address quality assurance/control issues.
• Prepare chemical stock solutions and reagents, as well as set preparation standards. Position will receive direction and support.

Responsibilities :

• Responsible for performing laboratory analysis necessary for the completion of projects typically under the direction of Group Lead and/or in consultation with the Technical Advisor(s)
• Responsible for adhering to and managing quality control programs. This includes maintaining documentation of their experimental results and equipment maintenance and calibration whenever assigned by Group Lead
• Responsible for customer sample distribution process and associated activities to meet agreed turnaround time
• Periodic review and update lab quality and controls documents/procedures
• Responsible for Laboratory Information Management System (LIMS) setup for new and existing equipment
• Responsible for performing laboratory analysis necessary for the completion of projects typically under the direction of Group Lead and/or in consultation with the Technical Advisor(s) whenever assigned by Group Lead
• Support Group/Program Lead in defining strategies, experimental plan and scope of project. This includes defining test execution details such as coordination of support services (analytical, mechanical, electrical, instrumentation, purchasing, etc.)
• The Technician may lead smaller technical support projects in their area of expertise. Technician generally plan one’s own work activities to meet defined project objectives and timetables.

Requirements:

• Diploma with background in Chemical/Process/Technical Engineering.
• Experience in quality control systems.

Apple Lim Pey Chyi - [email protected]

Personnel Reg No: R2090579

EA Licence No: 02C3423

Service Technician - (CCTV & Smart Door Systems) - Class 3

Working Days: 5.5 days

Working Hours: Mon-Fri 9am-6pm , Sat 9am-1pm

Location: Nicoll Highway

Salary: $2500 - $3000 + OT (If required)

Responsibilities & Duties:

• Installing CCTV / Electrical Wiring / Cabling installation/ Door Access System/Smart Home System.
• Servicing and maintaining of company product at customer place.
• Be able to work across multiple teams to get things done
• Perform any other ad-hoc duties as designed.

Tee Xin Li Reg No: R24121619

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Service Technician | Up to $2k | Class 3 | Boon Lay

Salary: $1, 500 - $2, 000
Working Days: Monday - Friday 8.30am – 5.30pm
Location: Kwong Min Road (Boon Lay)

Job Responsibilities:

• Knowledgeable in servicing and maintenance for refrigeration / electrical machines.
• Identifying faults, troubleshoot, and repair various commercial kitchen equipment.
• Performing repair jobs promptly and efficiently.
• Submitting of daily report for servicing & maintenance functions.
• Ensure all documents are updated upon completion of work
• Ensuring all works comply with the appliance standards and Health and Safety Act.
• Perform equipment quality compliance check.
• Work closely with direct superior to maximize repair rates.
• Maintaining service vehicle in good condition.
• Maintain the work bay and workshop areas in orderly and safe working conditions and exercise good housekeeping practice.
• Any other duties as assigned.

Job Requirements:

• Hands-on experience in installation, maintenance, troubleshooting and/or repairs in electrical machines and mechanical diagnostic skills.
• Possess a valid Singapore class 3 driving license is preferred.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Why Us?

• Basic + Overtimes = High Gross Salary
• Dormitory provided
• Transport provided
• Meal provided
• Teabreak provided

Job description:

• Changing tyre with rim for heavy vehicles
• Troubleshooting & maintaining tyres

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Responsibilities :

• Perform failure analysis using various tools and instruments such as digital multimeter,digital microscope,electrical testing equipment.
• Perform Destructive Analysis (cross section, tear down, decapsulation)
• Able to perform part removal process (desoldering process, tool cutting pcb)
• Willing to learn and operate X-ray machine and SEM/EDX.
• Feedback the Failure Analysis findings to engineer for investigation and report compilation.

Requirements :

• Nitec or Diploma in Electronic and/or Electrical Engineering or equivalent.
• At least 1 years of working experience in electronic manufacturing environment will be advantageous.
• Entry level in relevant engineering field are welcome to apply.
• Basic MS office skills and computer skills.
• Possess positive mind set and willingness to learn.
• No Shift work
• 5 days work week (Monday to Friday, 8.15am to 5.15 pm)
• Transport pick-up at Bedok MRT station.

• Company: Manufacturing Company
• Location: Tuas West Road
• Position: QC Technician (Job ID: 18812)

Job Description:

• Reports directly to the section engineer and/or designate
• Carry out all laboratory tests and measurements accurately in accordance to procedure and upkeep/maintain the instruments/facilities in good running conditions
• Prepares standards and reagents for analysis in accordance to procedure and ensure that all related documentation is maintained
• Perform basic maintenance and troubleshooting of instruments and write the maintenance report after troubleshooting/maintenance
• Handle ISO Documentation/Raw Data for QA Department
• Accurately update internal Statistical Process Control (SPC) charts and monitor the charts
• Assist in training for staff for QC Section-related activities when required
• Maintains and checks inventory of all storage samples and ensure all relevant records are maintained
• Perform receiving of QA department purchase and ensure that received items and all related document are correct at the point of receipt
• Assist in audit preparation
• Support the QA Section in its activities as and when required
• Involved in near miss identification and provide work improvement (QEHS) suggestions
• Maintains the general upkeep and cleanliness of the laboratory and related areas by performing housekeeping
• Strictly adhere to all EHS/QMS procedures in all aspects of the activities and observe line discipline and 5S
• Performs any other tasks as instructed by the supervisor, engineer, QC section manager and HOD

Job Requirements:

• Diploma in Chemical or science discipline
• Experience with analytical instruments like ICP-MS, AAS, etc.
• Ability to communicate clearly in both writing and verbally and good interpersonal skills
• Basic understanding of ISO9001, ISO14001 and OHSAS18001 standards will be an advantage
• Proficient in Microsoft Office Tools

Interested applicants please apply directly to the role for further shortlisting.

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Jeffrey Koh Kok Ann

EA Registration No: R1770345

Pasona Singapore Pte Ltd

1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246

EA License No:90C4069

Albatec is looking for a Warehouse & QC Technician to work with us in a dynamic and clean environment. Candidate to have self-consciousness in safety and assist in maintaining warehouse cleanliness and safe working environment.

Requirements

• Minimum Higher-Nitec and above
• Possess Forklift license or Class 3 license
• Knowledge on the use of measuring instruments, i.e. vernier caliper, micrometer, etc

Responsibilities

• Arrange warehouse inventories, maintain cleanliness and housekeeping
• Operate material cutting band saw
• Operate pin stamp machine for material marking
• Conduct visual and dimensional inspection of components and material stock
• Post-process machined materials e.g. deburring, polishing, etc
• Unpack and pack goods for inspection and delivery respectively
• Assist in machine maintenance

Responsibilities:

1. Responsible in performing Preventive Maintenance (PM) and repair job for production equipment
2. Maintain electrical / instrument systems for food production equipment / machines
3. Troubleshoot and identify mechanical / electrical / electronic systems issue and make corrective actions to resolve issues
4. Any other duties assigned by Supervisor

Requirements:

1. At least 2 years of relevant experience
2. Candidates are required to handle heavy equipment
3. Experience in food manufacturing industry will be an advantage
4. Fluent in spoken English and Mandarin (in order to liaise with Mandarin speaking associates)
5. Candidates will need to be comfortable working at heights

Location: Sin Ming Industrial Estate

Employment Tyre: Full Time

Job Description:

We are looking for a skilled and reliable Tyre Technician / Fitter to join our team at Mega Auto Pte Ltd. As a Tyre Technician, you will be responsible for inspecting, repairing, and replacing tyre for the following types of vehicles;

· Prime mover trucks

· Lorries greater than 10 ton,

· Commercial vans

· Saloon vehicles.

Key Responsibilities;

· Inspect tyres for wear, damage, and provide appropriate recommendations

· Perform tyre rotations, repairs, balancing and replacements

· To ensure proper tyre alignment and tyres pressure according to vehicle specifications

· Maintain accurate records for fleet vehicles

· Provide excellent customer service, answering questions and explaining necessary repairs or maintenance

· Adhere to all safety during repairs and maintenance

· Able to work on weekends and public holidays

· Able to standby and attend tyres breakdown services during wee hours

Qualification:

· Knowledge and able to identify tyre wear, damages, tyre maintenance, repair and fitting procedure

· Ability to change heavy equipment

· Minimum to have 5 years of working experiences handling heavy trucks tyre

· Valid driver’s license minimum class 3

· Excellent communication and customer service skills

Salary:

4.0K to 4.8K per month depending on experiences

The jobscopes include:

1) Service of Airconditioner

2) Repair of Airconditioner

3) Good checking, trouble shootings skill in splits, and multisplit type aircon

4) Possess Class 3 License will be an added advanage

5) Have working experience in Agent (Manufacturer) will be added advantage

6) Good Team Player

Jobscope Includes:

1) Aircon Servicing

2) Aircon Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Service Technician/Technician
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $2600 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform maintenance and repair tasks on various electrical and electronic systems, both outdoors and within the company workshop.
• Troubleshoot issues effectively to ensure minimal downtime.
• All other assigned duties.

APPLY NOW!!!

• Minimum Professional Certificate/NiTEC (Electrical & Electronic Engineering / Electrical Engineering).
• At least one year of experience in customer support and repair of forklifts, automobiles, and heavy industrial equipment.
• Must have knowledge of AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65053 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Logistics/ Manufacturing & Production
• Position Title: Maintenance Technician/ Facilities Technician
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: Monday to Friday, 8 am - 5.45 pm
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + PB
• Duration: Permanent

Key Responsibilities

• Perform preventive maintenance and corrective repairs on packaging and conveying equipment, including vehicles, chassis, forklifts, and industrial facilities.
• Troubleshoot and resolve electrical, mechanical, pneumatic, and hydraulic system faults.
• Identify technical issues through inspections and tests; analyze and diagnose malfunctions.
• Use various tools and equipment for diagnosis and repair; order and replace parts, working with suppliers.
• Maintain accurate repair records and parts inventory; communicate findings and repair options.
• Attend to breakdowns, reduce equipment downtime, and enhance performance through quality maintenance.
• Ensure compliance with Health & Safety policies, maintain workplace housekeeping, and follow safe work procedures.

APPLY NOW!!!

• Possession of Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging/ packaging/ conveyor system
• General knowledge of AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Experience in Bagging line would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65269 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/Organization Type: Distributors & Servicing of Boiler and Laundry Equipment
• Position Title: Service Technician
• Working Location: Nearest MRT – Toa Payoh/Potong Pasir
• Working Hours: Monday – Friday, 8 am – 5 pm, Saturday, 8 am – 1 pm
• Salary Package: Up to $2,800 + AWS + VB + OT
• Duration: Permanent

Key Responsibilities

• Execute installation tasks for equipment such as steam boilers and laundry machines.
• Conduct repairs, perform troubleshooting, and provide servicing for various equipment types.
• Respond promptly to service requests and perform maintenance work at customer locations as needed.

APPLY NOW!!!

• Basic electrical/mechanical knowledge.
• Ability to read electrical drawings.
• Candidates with experience in steam boilers and laundry equipment will be advantageous.
• Candidates with valid Class 3 Driving License preferred.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67050 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114