Job Scope:

· To assist Fumigator in carrying out fumigation & pest control services in accordance with regulatory requirements

· Notify Supervisor immediately of all incidents which are of material importance to the company such as accidents/near-misses/safety breaches/customer complaints followed by written report

· Check and ensure that all material/equipment/resources required for the day's work is available in the vehicle and in good working condition

· Always maintain sufficient stock of supplies and to submit requisition for replenishment if stock runs low.

· Maintain all equipment on board the vehicle in good working condition and to report damages/uncalibrated items immediately

· To ensure accurate reporting of fumigant stock in the vehicle at the end of each working day

· To be able to manage client's expectations and requests at work site and perform decision making if the team is able to accede to the demands within their limits, else TL will need to escalate to the Supervisor

Requirement:

1.) Driver’s License (Class 3) Required

2.) Vector Control Technician Licence

3.) Completed the following training

a.) Forklift Driver’s Licence

b.) Scissor lift Certificate

c.) Basic First Aid Course Certificate

d.) WAH Supervisor Certificate

4.) Fluency in spoken & written English

5.) Good planning and time management skills

6.) Physically Fit

7.) Ability to work in Teams, and supervise junior technicians and assistants

8.) Good interpersonal skills

9.) Good customer service skill

Should have knowledge of cabling,Assembling electronics,Soldering ,Fitment of PCB ,Testing.

Physical assembly of parts ,PCB,Testing ,Soldering ,Coaxial and power connector cable assembly making.

testing of Assembled electronics and Physical parts .

Knowledge of following Cabling design and assembly instructions

Information:

• Salary: $2400 - $2800 Basic
• Attendance: $40
• Normal working hours: Mon-Fri, 8am-5pm
• Company transport at various location in the west

Responsibilities:

• Perform sampling incoming quality inspection
• Perform using equipment such as Vernier Caliper, Micrometer, Guages, Profile Projector and Smart Scope

Requirements:

• ITE/Diploma in Engineering
• Entry level

Interested applicants, send in your updated resume by clicking “Apply Now”.

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

ALG is currently hiring Aircraft Technicians (All Trade) to work for our Commercial Aviation client's MRO based in Changi, Singapore.

Job Responsibilities:

• Troubleshoot, inspect and perform maintenance on customer aircraft including engine, avionics, and aircraft components.
• Be attentive, and ensure close coordination between other trades (B1, B2, Sheet Metal, Cabin) to ensure continuous smooth progress and completion of the projects.

Job Requirements:

• 1-2 years of relevant experience in aircraft maintenance
• Willing and able to perform rotating shifts, including night shift work (if required)
• Able to read mechanical engineering drawings with the direction of the supervisor.

If you're interested in this role, please APPLY NOW! Do note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R23113794

Responsibilities:

• Oversee building and data centre facilities: recording and reporting on the BMS / EMS / Fire D&P / Chiller / Electrical etc
• Administrator for preventative maintenance programs to ensure that equipment are properly serviced & maintained
• Maintain good documentation of facilities and / or equipment maintenance
• Prepare monthly SLA reports for equipment uptime, power usage & temperature readings
• Respond to emergency situation and be on 24x7 standby duty
• Prepared to be on 24x7 standby recall to provide extra manpower coverage when necessary
• Be involved in new data centre projects as well as renovation and maintenance to existing space
• Responsible to handle site inspections / audits by external authority (eg. HDB/LTA/NEA/FSB)
• Scheduling and tracking of servicing jobs and vendor management on a day to day basis
• Maintain high customer service level standards
• Managed all facilities contracts

Requirements:

• Min. Diploma in Building / Facility Management or any other related field
• Some relevant experience in Data Centre facility management and vendor management is a good bonus
• Good knowledge in building technology, mechanical and electrical services and facilities management
• Location: Lakeside / Admiralty

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

• Basic up to $4,500
• Monday – Friday, 8:30am – 5:30pm
• Location: Jurong East

Responsibilities

• Independently diagnose, repair, and troubleshoot pneumatic, electric, and hydraulic lifting equipment.
• Respond to emergency and unscheduled repair needs.
• Complete all assigned tasks within designated timelines.
• Carry out additional responsibilities as assigned by the Service Manager.

Requirements

• Min. ITE in Mechanical Engineering.
• Min. 3 years of mechanical engineering experience in the hoist and crane industry.
• Skilled in independently repairing and troubleshooting pneumatic/electric hoists and electric overhead travelling cranes.
• Must hold a valid Singapore Class 3 driving license.
• Candidates with extensive experience may be considered for a supervisory role.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected]

**Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752
EA. Registration No.: R24123733 | Chen Yit Keat

Facility Technician (Lift Elevator / Escalator)

The Role:

• Maintain, service and repair the elevators, escalators and mechanical-parking systems that includes checking, oiling, greasing, mechanical adjustment, trouble-shooting, testing of safety devices, inspection and parts recommendation and replacement in accordance to local code of practice
• Demonstrate understanding and compliance of Environmental, Health and Safety (EH&S) procedures
• Attend to breakdown maintenance calls at various job sites
• Support Service Operations Team to achieve department objectives on service sales targets and service quality standards

Benefits:

• Basic from $2400
• OT payable
• Transport allowance, standby allowance
• 8am to 6pm (Monday to Thursday), 8am to 530pm (Friday)
• Islandwide
• Training at Kallang

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Gisalle Lim

Registration Number: R23115299
AlwaysHired Pte Ltd
EA Licence No: 24C2293

Why Us?

• Basic + Allowances + AWS + VB
• Working Location: Islandwide
• Monday - Friday; 8am - 6pm

The Role:

• Maintain, service and repair the elevators, escalators and mechanical-parking systems that includes checking, oiling, greasing, mechanical adjustment, trouble-shooting, testing of safety devices, inspection and parts recommendation and replacement in accordance to local code of practice
• Demonstrate understanding and compliance of Environmental, Health and Safety (EH&S) procedures
• Attend to breakdown maintenance calls at various job sites
• Support Service Operations Team to achieve department objectives on service sales targets and service quality standards

What are we looking for?

• At least 1 year hands on experience
• Required to be on standby after work hours and/or Weekends, additional allowance will be given
• Training location: Kallang

Next Step:
Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Edmund Chung Keng Loon
Registration Number: R1986801
AlwaysHired Pte Ltd
EA Licence No: 24C2293

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will perform Non-Destructive Testing and its related duties in accordance with the written instructions and specific calibration requirements.

Essential Responsibilities:

• Perform specific calibrations, NDT, and specific evaluations for acceptance or rejection of parts
• Correct interpretation and understand the inspection operation sheets and work instruction
• Organize, sort and prepare the parts for NDT inspection
• Load, unload, and operate either the real-time XR, UT or auto FPI line effectively
• Perform either X-Ray Inspection, Ultrasonic Inspection, Fluorescent Penetrant Inspection, Eddy Current Inspection, Magnetic Particles Inspection in accordance with the inspection operation sheets
• Ensure the equipment operation readiness always
• Assist the Engineer for any inspection evaluation and reporting
• Upkeep of process system and testing equipment to ensure its continuous operations in compliance to approved documents
• Prepare and clean parts before and/or after inspection
• Conduct audits in NDT area to ensure continuous system compliance to meet regulatory agencies requirements
• Perform scheduled maintenance & housekeeping tasks

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level
• Able to work rotating shifts
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

• Well Established Company

• Working location at Woodlands, Senoko

• Working hour: Monday - Friday (8am - 5pm) & Saturday (8am – 12pm)

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Other task that assigns by the management.

Requirement

• NITEC / Professional Certificate in Electrical / Electronic / Mechanical or equivalent.
• 1 - 2 years of relevant working experience
• Possess Class 3 License is an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job descriptions

• Carrying out maintenance, repairing and servicing tasks (Electrical /Aircon / Mechanical / Building / Repairs).
• Carry out preventive / breakdown and corrective maintenance of M&E works or Aircon or Building.
• To carry out maintenance operations for facilities or buildings , including troubleshooting and repairing mechanical, electrical, and plumbing systems
• Attend to defects and customers' complains promptly. Respond to any fault reports, client requests, or any breakdowns efficiently.
• Performing regular maintenance and repairs on the building facilities or systems to ensure smooth operation. Reporting any fault issues to the supervisor.
• Conduct preventive checks and troubleshooting on the M&E systems.
• Record or inform supervisor of any faults or issues during routine checking.
• Perform any other ad hoc duties assigned

Requirements

• Minimum 2 years and above in Facilities Maintenance or Engineering company
• Minimum NTC/ ITE/ NITEC/ HIGHER NITEC/ VOCATIONAL CERTIFICATE in Mechanical / Air-Con / Electrical / Electronics /Building / Facility Management or facilities maintenance

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Location: West side, Toh Guan Road

Need to have own transport.

Basic + Transport Allowance + OT + AWS + VB

JD:

1. Carry out preventive and corrective maintenace works in accordance to the schedule
2. Carry out corrective maintenace works as when required
3. Observe safety work procedures
4. Ensure proper keeping and use of tools
5. Observe proper work behaviour while working
6. Perform standby works when required
7. Followup on breakdown report and assist Stanby Section where required
8. Report to the superiors on all matters relating to team
9. Carry out any other duties as assigned by the superior
10. Keep proper records of of works carried out in the revelent reports
11. Attend to the building or equipment inspections as required, by law (BCD, FSB)
12. Assist in conducting and investigating of damages/accidents to equipment or personnel
13. Follow up on QC and QA defects.
14. Ensure compliance to Environmental policy, reduction of waste and prevention of pollution

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

SERVICE TECHNICIAN (5 Day / West)

Job Type : Full-Time

• Travel Opportunity
• Training Provided
• 5 Days Work Week

Responsibilities :

• Have a passion to carry out trouble-shooting and maintenance works.
• Love the satisfaction after solving difficult machines.
• Willing to do hands-on work
• Willing to do brazing work
• Any other adhoc duties as assigned

Requirements :

• Candidate must possess at least Secondary School / "O" Level, Professional Certificate / NiTEC, Diploma / Advanced / Higher / Graduate Diploma in Engineering (Industrial), Engineering (Mechanical), Engineering (Mechatronic / Electromechanical) or equivalent.
• Required Language(s) : English
• Required Skill(s) : Aircon, Refrigeration, Chiller, Mechanical, Vacuum Pumps, Water Pumps, Scrubbers or Chillers.
• Able to travel on short notice
• Possess valid driving license (optional)
• Only Singaporean / SPR / Malaysian may apply.

Interested candidates who wish to apply for the advertised position, please send to us your resume via APPLY NOW

Email : [email protected]

We regret that only shortlisted candidates will be notified.

Job Advertisement: Technical Officer (Ancillary)
Institution: Hospital
Family Group: Ancillary

Main Responsibilities and Duties:

• Ensure all preventive and corrective maintenance works are completed according to prescribed checklists and schedules.
• Assign and lead technicians to address breakdowns or complaints promptly; troubleshoot and rectify issues within required KPIs.
• Provide feedback on major works to the Engineer.
• Ensure that all work is carried out in adherence to safety procedures and protocols.
• Handle project-related tasks as assigned.
• Perform any other duties as required by the Engineer or Management.

Key Requirements:

• Diploma in Facilities Management / Engineering
• Relevant technical qualifications and experience.
• Strong troubleshooting skills and a proactive approach to problem-solving.

Job Description

• Industry/ Organization Type: Manufacture of Electrical Power Distribution, Control and Automation Systems
• Position Title: Electrician/Electrical Assembly Technician
• Working Location: Tuas Crescent (Transportation Provided)
• Working Hours: Monday – Friday, 8.15am – 5.45pm
• Salary Package: Up to $2,000 + OT + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assemble framework parts, including drilling, tapping, and installation of fittings and components.
• Conduct electrical wiring and termination tasks efficiently.
• Execute any additional tasks as assigned by the Supervisor, Foreman, or Assistant Foreman.
• Adhere to all safety regulations and requirements during the completion of tasks.
• Maintain daily working tools to ensure they are in good working condition.
• Ensure cleanliness and orderliness in the work area, promoting excellent housekeeping practices.

APPLY NOW!!!

• Possess a Trade Certificate and/or have at least 1 year of relevant experience in electrical fittings and wiring.
• Ability to interpret and read single-line diagrams.
• Willing to cooperate with overtime arrangements as needed.
• Inexperienced candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72149 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Opportunity: Contract Technician (6 Months)

Company: Food MNC

Location: Tuas

Work Environment: Air-conditioned fragrance manufacturing plant

Contract Duration: 6 month

Salary: up to $2,400/month

Working Hours: Monday to Friday, 8:30 AM - 5:30 PM

Job Description

Packing Operations:

Pack finished goods and raw materials at Fragrance, Cosmetic Ingredient, and Oral Care plants.

Apply correct labels to finished goods drums based on product type.

Compounding Tasks:

Perform compounding duties in Fragrance, Oral Care, and Cosmetic Ingredient plants.

Training and Safety Compliance:

Paired with a senior technician for on-the-job training via a buddy system.

Undergo Safety Induction training to meet regulatory requirements.

Equipment Operation:

Operate electronic weighing scales, electric stackers, mechanical pumps, and diaphragm pumps safely.

Record Keeping:

Maintain accurate records of packed drums and report any yield gains or losses.

How to Apply: send your resume to: [email protected] or telegram @jocelynchan ASAP!

Jocelyn Chan| Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence number : 99C4599 Personnel EA License: R1331820

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will be responsible to set up and operate machines such as CNC machines in Milling, Grinding and Lathe; Electrical Discharge Machine (EDM); Surface Grinding; VT Lathe and various conventional machines and specialized equipment to perform machining operations. 

Essential Responsibilities:

• Set up and operate all types of conventional or CNC machines such as electrical discharge machine, laser machine, lathe, radial grinder, reciprocal grinder, milling machine, drilling machine, and specialized equipment to perform machining operation of the most complicated nature in the making of jigs, fixtures, tools, dies, gauges, test equipment and product parts, and their rework or modifications
• May follow a particular product through the machine shop using a variety of machine tools to complete the finished product
• Use all types of standard and special gauges, various hand tools
• Maintain pertinent records; work according to technical drawings and instructions
• Perform scheduled maintenance & housekeeping tasks
  

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read and understand the manufacturing operation sheets and standard operation procedures in English
• Able to work rotating shifts
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• Good mechanical aptitude
• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

The client is the world leading semiconductor company from USA. It is ranked as one of the “Top Best Places to Work in Singapore”. Below position is open urgently.

Position: Technician 1 (12 months Contract, Renewable)

Location: Woodlands

Working Hours: 12 hours shift - Permanent Day/Night

Job Responsibilities:

• Perform manufacturing functions in the production of semiconductor devices by operating various precision equipment within established process specifications.
• During pass down, obtain the list of lots to run from the day shift engineer/technician.

Shift Duties:

1. Check MES (Manufacturing Engineering System): Monitor when the lot will hit and hold the lots at downstream steps.

2.Manage Lots:

• When a lot hits, raise a SharePoint request (form) and trigger the Probe Runner to manually place the wafer on the tester or oven in sequence.
• Follow the Clear Quest Request (CQ) from the Engineer.

3.Operate Software:

• Use MobaXTerm (Omelek) software to load and start wafer testing.
• Unloading wafers from testers/ovens.
• Setting pre-heat temperatures.
• Monitor and update wafer testing progress in MS Excel.

4.Close CQ Requests: Ensure all requests are completed and documented.

Requirements:

• Education: GCE 'A' Level.
• Preferably with working experience in the semiconductor field.
• Proficient in MS Excel and computer literate.

**Interested candidates, kindly email updated resume to [email protected] with Subject of "Technician 1", thank you.

Job Description

• Industry/ Organization Type: Manufacture of Electrical Equipment
• Position Title: Service Technician (Electrical Switchboards)
• Working Location: Nearest MRT – Woodlands North/Admiralty
• Working Hours: Monday – Saturday, 8.30am – 6pm
• Salary Package: Up to $2,500 + VB + OT
• Duration: Permanent

Key Responsibilities

• Perform the installation and commissioning of Electrical Switchboards on various sites, ensuring all components meet the required specifications and standards.
• Respond to service calls promptly, providing exceptional on-site service support, and troubleshoot any issues that arise efficiently.
• Maintain continuous follow-up with customers regarding service issues to meet and exceed customer expectations, ensuring satisfaction and service quality.

APPLY NOW!!!

• Minimum qualification of GCE 'N' level or Nitec in Mechanical/Electrical Engineering
• Prior experience working with Electrical Switchboards is preferred
• Inexperienced candidates are welcome to apply as training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70251 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Perform PM, CM and BM of vehicles;

• Ensure the maintenance services and quality work is carried out with high quality in-accordance with the guidelines and report to workshop supervisor for necessary technical assistance;

• To complete the job within the specified time given;

• Conduct diagnostic check, troubleshooting, automotive transmission and engine overhaul if required;

• Responsible for maintaining, troubleshooting and rectifying vehicle defects;

• Maintain the tools and equipment well;

• Ensure good housekeeping in workshop at all times.

Job Description:

• Logging of cases that are seen via video consultation
• Pick and Packing the medications that have been prescribed by the doctor online
• Arranging for deliveries for medications
• Working closely with our operations team and delivery partners to ensure that medications are delivered smoothly and on time
• Ensuring that medications packed are correctly

Job Requirements:

• Min. 'N' / 'O' Levels / A level / Diploma in any courses
• No experience needed - Training is provided

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

We are looking for a technician or engineer who can handle repairs to commercial chillers and freezers, ice machines, ice cream machines and walk in chillers and freezers, ovens, grills, and other commercial kitchen equipment. We also need someone who can join our team to undertake building and installation of walk in chillers and freezers. A Singapore driving licence is required as you will be travelling from job to job either on your own or with a team to do repairs on site. You will also be required to do repairs and equipment checking in our own service department premises.

It will also be helpful if you can operate and use Windows based computers.

Good written and spoken English is a must.

Permanent .2 rotating shift (2 days , 2 nights . 2 off). Whitley Road

830am-830pm

Our client

Facility management /M&E engineering company in building and industrial market

Service offered to client

A&A work, Build manage, maintain

Specialities

M&E Engineering, Facility Management, Heating, Ventilation, Air-Conditioning, Energy Performance Contracting, Building Maintenance, Building Operation, Managing Agent

Job scope

· Troubleshoot, repair, maintain mechanical/electrical services, plumbing & sanitary services, aircon servicing and maintenance, ACMV systems, chillers, and electrical control system/plumbing system

· Preventive and corrective maintenance of building M&E equipment.

Requirements

· Nitec in Mechanical/Electrical /acmv or Facilities Management

· Hands on experience in Building Facility Maintenance services ,aircon n chillers, Electrical

Working hour: Rotating shift (2 days , 2 nights . 2 off). Whitley Road

830am-830pm

Work location :Whitley Road

Whats on offer

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

For better response, pls apply via job page

https://recruitmentalliance.zohorecruit.com/jobs/Careers

click job opening, click relevant position

We regret that only shortlisted candidates will be notified.