Maintenance Technician

Salary: $1,600 - $2,200 + AWS + Allowance + VB

Working Days: Mon – Fri (8am - 5.30pm) + OT

Working Location: Sembawang Area, transport provided

Responsibilities

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Must be willing to wear jumpsuit and mask as Personal Protective Equipment while working in the production area.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Responsibilities

• Carry out condition monitoring services and provide good technical support to customers

Ideally, the candidate should possess

• Higher Nitec in Electrical Engineering or equivalent
• Comprehensive knowledge of Electrical Assets, the Electricity Industry and Regulation
• Excellent interpersonal, motivational, communication and time management skills
• Possess Class 3 driving license

Technician

Assit the Manager in the daily operations of the quipment and facilities.

Conduct regular inpsection, troubleshooting, and preventive and corrective maintenance work.

Carry out troubleshooting and minor repairs to building works and M&E works including air-conditions, electrical, plumbing and fire protection system.

Any other assignments directed by the Management.

Please include the following 2 item in your resume:

1. What is your expected salary?

2. When are you able to start work?

FM Technician Job Responsibilities

1. Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition.
2. Undertake minor building, mechanical and electrical repair works, and handyman works (such as changing of light bulbs, reset drawer locks, etc).
3. Monitor and attend to maintenance service requests, investigate and initiate corrective actions for any service and equipment breakdown, or fault detected during routine check, servicing and maintenance.
4. Daily, weekly and monthly inspection of key facilities, systems and critical areas.
5. Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works carried out by contractors.
6. Supervise contractors/vendors performing maintenance works on building facilities (e.g. Building maintenance, Mechanical & Electrical systems (M&E), horticulture, cleaning, pest control etc).
7. Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions.
8. Assist in fire safety management, emergencies and business continuity plan for the Authority’s premise.
9. Liaise with Authority’s employees on projects and maintenance works and ensure compliance with fire, health and safety standards.
10. Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment.
11. Update information databases and breakdown record for engineering systems.
12. Any other facilities management works or related works that arise from the building operations and need.

Job Qualifications

1. At least three (3) years’ relevant experience in building operation and maintenance of building facilities.
2. The technicians shall hold minimum a NITEC/Higher NITEC in Facility Management or Mechanical and Electrical Services or equivalent.
3. Additional experience in electrical system, uninterruptible power supply, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards will be an advantage.
4. Additional qualifications such as Electrical Worker License/Singapore Certified Energy Manager (Associate)/Green Mark Facilities Manager will be an added advantage.

Immediate 1 Year Project assignment renewable for Singaporean to join as Service Technician /Systems Executive

Office Hours Mon to Fri (24X7 support standby required with standby allowance given)

Suited for those who prefers outdoor hands on servicing jobscope

Min NITEC or Diploma in Electrical / Electronics/Computer relevant + Class 3 Driving License is mandatory

Work sites: Thomson/Ang Mo Kio

Attractive Basic + Standby allowance (when standby) + HP Claim monthly + Transport Claim + up to 2months Performance Bonus

Jobscope:

Overview: You will be responsible for Electro-optics system site support, perform troubleshooting, fault diagnosis and failure analysis to determine the cause of failure for the system. Diagnose and repair EO system issues in lab by using logical, step-by-step approaches to ensure minimal downtime for the customers.

• Support the team on Electro-optics and surveillance systems for preventive and corrective maintenance at sites and vessels
• Update all fault reporting documentation for monthly project meeting
• Liaise with customer for maintenance activities
• Perform in house repair of Electro-Optics equipment
• Perform rotational 24x7 standby services for fault recovery works at various locations
• Able to work offshore and work at height
• Support system setup, testing and installation
• Perform other duties as assigned by superior

Requirements:

• Min ITE certificate / Diploma in electrical / electronic / computer engineering
• Possess Singapore Class 3 driving license
• Experienced in Electro-optics System
• Must be able to clear Cat 2A security clearance for this role
• Positive work attitude, self-motivated, creative, and resourceful with a customer first mind set
• Independent, hardworking, and able to work under pressure
• Able to handle emergency situations outside of normal work hours when required
• Good inter-personal, organizational, problem solving and teamwork skills.

• 5 Day (Mon – Fri): 8am-5.30pm + OT
• Salary: $1,600 - $2,200 + AWS +Allowance + VB
• Location: Senoko South Road（Sembawang Area）, transport provided

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Must be willing to wear jumpsuit and mask as Personal Protective Equipment while working in the production area.

Responsibilities:

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Salary: up to $2600
Working Days & Hours: Mon-fri office hrs

Location: Boon Lay

Job Description:
Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.

• Perform basic checks, calibration and maintenance of test equipment to ensure that test results are accurate.
• Assist and support in non-conformance and investigations of customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Responsible for data entry, clerical and admin support.
• Maintain housekeeping of QC laboratory to ensure a clean and safe working environment.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements: Min Diploma in Life Sciences or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Our client is a global leading cloud infrastructure provider that leverages innovative technology - Hyperconverged infrastructure, HPC with CDI Architecture, AI/ML, Advanced Cooling - to help worldwide customers meet their needs for sophisticated data center operation.

Location: East (Tampines)
Working days; 5 days Monday to Friday
Working hours:
AM shift : 7am to 3pm
PM shift : 3pm to 11pm (Shift allowance $6/day)
Night shift : 11pm to 7am (Shift allowance $17/day)
Salary: Up to $3,000 + Bonus

Roles and Responsibilities:

• Assist engineer to carry out all the Test related activities
• To support & implement different product configuration setup
• To test, analyze and perform troubleshooting on product failures and work closely with process and test engineers on yield improvement
• Participate in the Kaizen activities
• To update test tracking records
• To prepare and update Working Instruction
• To support the NPI Process and production runs
• Participate in ISO activities (implementation & maintain)

Requirements:

• Nitec & above qualification in engineering with at least 1 to 3 years of working experience in testing and debug environment
• Good team player
• Ability to work with Peers, engineers, and superiors
• Able to multi-task & work under pressure
• Perform shift work
• Good understanding of test methods and concepts
• Knowledge of programming and debugging skills

We regret to inform that only shortlisted candidates will be notified.

Interested candidate, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/9197

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Our client is a global leading cloud infrastructure provider that leverages innovative technology - Hyperconverged infrastructure, HPC with CDI Architecture, AI/ML, Advanced Cooling - to help worldwide customers meet their needs for sophisticated data center operation.

Location: East (Tampines)
Working days; 5 days Monday to Friday
Working hours:
AM shift : 7am to 3pm
PM shift : 3pm to 11pm (Shift allowance $6/day)
Night shift : 11pm to 7am (Shift allowance $17/day)

Roles and Responsibilities:

• To assist engineer to work on all process related functions to ensure an efficiency production
• To work with all internal departments to create a proper process operation flow as per customer & business requirement
• To ensure production W/I is properly maintained include SFC control process & SAP maintain process
• ECO changes & implementations.
• Participate in Kaizen activities
• To update EC masterlist & tracking
• To prepare and update Working Instruction.
• To provide trainings over W/I to production.
• To support on the NPI Process
• To support production on mass run
• Participate in ISO activities (implementation & maintain)

Requirements:

• Nitec & above qualification in engineering with at least 1-3 years of working experience in process.
• Good team player
• Ability to work with Peers, engineers, and superiors
• Able to multi-task & work under pressure
• Compliance with RBA standards

We regret to inform you that only shortlisted candidates will be notified.

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/9198

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Entry Level Preventive Maintenance Technician (Semiconductor)

Company benefits:

• Increment after probation (subject to performance)
• 1 year completion bonus

Remuneration: Basic with AWS + VB + Allowance & OT pay

Work location: Kranji Loop

Working hours: 12hours Shifts (3-4 Work Days a Week)

To be rotated every 2 months between Day & Night shifts

Key Responsibilities:

• New & old parts arrangement & logistic (maintenance room, store to tool side).
• Preparation & housekeeping of PM jigs & tools.
• Perform robot PM: parts cleaning & greasing, replacement of sensors, motors, motor drivers etc.
• Installation of vacuum valves, fore line pipes, heater jackets.
• Support tool owner engineer to do technical activities in fab: trouble shoot, modification, installation, de-installation.
• Support 6S & logistic activities (parts cleaning, arrangement, labelling, housekeeping.

Key Requirements

• Min. NITEC in any Engineering field or equivalent certification
• Willing to do hands-on work and comfortable to be in cleanroom suit

*Able to start work within short notice will be highly advantageous.*

WhatsApp me wa.me/6585125305 for a prompt response to your enquiry!

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**Please be notified that only shortlisted candidates will be notified**

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Our client is a Oil & Gas Industry. Due to their current expansion plan, they are looking for a Electrical Technician to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities:

• Apply functional requirements and use engineering tools to design electronic circuits or control systems for product changes or new development under direct supervision.
• Utilize software tools or applications to analyze and test electronic circuits or systems, documenting performance against design criteria.
• Identify testing objectives at a component level following Health, Safety, and Environment (HSE) procedures, and evaluate test results.
• Assist in preparing component specifications and follow established work processes to document designs.
• Collaborate in preparing materials for design reviews.
• Work with mentors to understand the process of submitting invention disclosures and recognize ideas with potential intellectual property (IP) value.
• Communicate effectively as a team member to contribute innovative solutions.
• Demonstrate initiative by exceeding expectations and paying close attention to detail, ensuring work is completed accurately and to the highest standards.

Job Requirements:

• Skills acquired through completion of an undergraduate degree in Electrical Engineering or a related discipline.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Our client is a well-established MNC, market leader in the Pharmaceuticals industry. They are looking for a Process Technician to assist their team for the next phase of their business. They are located in the West – easily accessible.

Note: This is a 1-year contract, convertible and renewable.

Responsibilities:

• Adhere to company’s guidelines while operating and overseeing manufacturing machinery, promptly addressing any alerts during production
• Manage materials used in production and undertake cleaning and sterilization duties within the workplace
• Responsible for the daily functions/operations of designated manufacturing machinery
• Store materials in accordance with the prescribed company’s protocols
• Record/Maintain data in the company’s inventory management system
• Gather the necessary materials, equipment, and solutions for cleaning and sterilization
• Conduct both manual/automated cleaning and sterilization of machinery, containers, and workplaces
• Conduct calibration and pre-operational checks on manufacturing equipment, following the standard protocols
• Operate machinery equipment for filling and packaging purposes
• Identify/Resolve packaging quality issues, implementing the corrective measures as required
• All other adhoc duties as assigned

Requirements:

• Minimum Nitec/Diploma in any relevant fields of Engineering
• Minimum 1 year of relevant working experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

☑ Basic $ 2500 - $ 3500

☑ 5 Days (Mon – Fri: 08:30am – 5.30pm)

☑ MacPherson, Island wide travel & Class 3 license needed.

☑ Good Benefits + Career Growth

Key Responsibilities:

• Install, repair, and maintain safes and vaults.
• Manoeuvre safes using hand tools and equipment.
• Install and service mechanical and electronic locks.
• Keep accurate records of all work performed.
• Provide excellent customer service and address client needs.

Qualifications:

• Experience in safe installation/repair; able to handle heavy safes.
• Skilled with tools and locking systems.
• Class 3 driving license needed

Interested applicants are welcome to apply online with updated Resume or email to [email protected]

Only shortlisted candidate will be notified

Yvette Kam Soo Leng

Registration: R22107492

FM Technician Job Responsibilities

1. Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition.
2. Undertake minor building, mechanical and electrical repair works, and handyman works (such as changing of light bulbs, reset drawer locks, etc).
3. Monitor and attend to maintenance service requests, investigate and initiate corrective actions for any service and equipment breakdown, or fault detected during routine check, servicing and maintenance.
4. Daily, weekly and monthly inspection of key facilities, systems and critical areas.
5. Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works carried out by contractors.
6. Supervise contractors/vendors performing maintenance works on building facilities (e.g. Building maintenance, Mechanical & Electrical systems (M&E), horticulture, cleaning, pest control etc).
7. Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions.
8. Assist in fire safety management, emergencies and business continuity plan for the Authority’s premise.
9. Liaise with Authority’s employees on projects and maintenance works and ensure compliance with fire, health and safety standards.
10. Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment.
11. Update information databases and breakdown record for engineering systems.
12. Any other facilities management works or related works that arise from the building operations and need.

Job Qualifications

1. At least three (3) years’ relevant experience in building operation and maintenance of building facilities.
2. The technicians shall hold minimum a NITEC/Higher NITEC in Facility Management or Mechanical and Electrical Services or equivalent.
3. Additional experience in electrical system, uninterruptible power supply, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards will be an advantage.
4. Additional qualifications such as Electrical Worker License/Singapore Certified Energy Manager (Associate)/Green Mark Facilities Manager will be an added advantage.

• Setting up and installing new printers, copiers, scanners, and copier management software.

• Providing routine service and maintenance to copiers, scanners, printers, and fax machines.

• Troubleshooting and repairing malfunctioning cartridges, printers, and copiers.

• Writing diagnostic reports and training manuals.

• Providing demonstrations and customer training.

• Managing orders and stock of new equipment, parts, and materials.

• Providing excellent customer support and service.

• Managing schedules and customer emergencies.

• Keeping abreast of the latest technologies and practices in the industry.

Job Description:

The CPPS group is seeking a highly motivated scientist or senior scientist to lead in the development of AI technologies to deliver impactful and innovative digital technologies for predictive/prescriptive analytics and decision support. He/she will be expected to define growth opportunities and new ways to engage industry to advance AI for manufacturing, and look after a team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI. The key roles & responsibilities include, but are not limited to the following:

• Develop AI models to enhance and automate decision making and enable predictive/prescriptive analytics
• Define opportunities to push frontiers of AI research in manufacturing
• Formulate research direction and proposals for competitive funding to advance AI in manufacturing
• Engagement of companies to understand their challenges and translate to research collaborations in AI
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Contribute to research and development in Cyber-Physical Production System technologies
• Develop research proposals to secure competitive funding
• Lead technology development, live production environment testbedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• PhD in Computer Science, Data Science or Mechanical/Industrial/Electrical Engineering
• 7 years’ experience in developing and deploying machine learning and data analytics (for Senior Scientist)
• Strong leadership skills
• Programming/coding skills in developing AI and data analytics
• Skills in data modelling, machine learning, signal processing
• Good track record of publications
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

CPPS group is seeking a highly motivated, independent and creative research engineer to deliver impactful and innovative AI-based digital technologies for predictive/prescriptive analytics and decision support. The candidate will work with a multidisciplinary team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI.

The key roles & responsibilities include, but are not limited to the following:

• Co-develop AI models to enhance and automate decision making
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Engage companies to understand their challenges and translate to research collaborations in AI
• Contribute to research and development in Cyber-Physical Production System technologies, including technology development, live production environment test-bedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related field
• Candidates with an ambition and attitude for cutting-edge research are welcome to apply
• Strong understanding of machine learning algorithms, statistical analysis, and data preprocessing techniques
• Experience with machine learning frameworks and libraries, such as TensorFlow, Keras, PyTorch, or Scikit-learn
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

CPPS group is seeking a highly motivated, independent and creative research engineer to deliver impactful and innovative AI-based digital technologies for predictive/prescriptive analytics and decision support. The candidate will work with a multidisciplinary team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI.

The key roles & responsibilities include, but are not limited to the following:

• Co-develop AI models to enhance and automate decision making
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Engage companies to understand their challenges and translate to research collaborations in AI
• Contribute to research and development in Cyber-Physical Production System technologies, including technology development, live production environment test-bedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related field.
• Candidates with an ambition and attitude for cutting-edge research are welcome to apply.
• Strong understanding of machine learning algorithms, statistical analysis, and data preprocessing techniques
• Experience with machine learning frameworks and libraries, such as TensorFlow, Keras, PyTorch, or Scikit-learn
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

The CPPS group is seeking a highly motivated senior research engineer or lead research engineer to lead and conduct R&D in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls, integration and PLC programming. The key roles & responsibilities include, but are not limited to the following:

• Conduct R&D in novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Work with a team of engineers and scientist to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is an advantage

Job Requirement:

• Masters or Bachelor degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls, integration and automation
• 1-3 years experience in industry and/or R&D projects in the area of controls and IIOT (min. 5 years for Lead Research Engineer).
• Develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others.
• Ability to apprehend and/or interpret electrical circuit diagrams is a strong advantage
• Excellent technical presentation and writing skills
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

CPPS group is seeking a highly motivated, independent and creative research engineer to deliver impactful and innovative AI-based digital technologies for predictive/prescriptive analytics and decision support. The candidate will work with a multidisciplinary team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI.

The key roles & responsibilities include, but are not limited to the following:

• Co-develop AI models to enhance and automate decision making
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Engage companies to understand their challenges and translate to research collaborations in AI
• Contribute to research and development in Cyber-Physical Production System technologies, including technology development, live production environment test-bedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related field
• Candidates with an ambition and attitude for cutting-edge research are welcome to apply
• Strong understanding of machine learning algorithms, statistical analysis, and data preprocessing techniques
• Experience with machine learning frameworks and libraries, such as TensorFlow, Keras, PyTorch, or Scikit-learn
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description:

CPPS group is seeking a highly motivated, independent and creative research engineer to deliver impactful and innovative AI-based digital technologies for predictive/prescriptive analytics and decision support. The candidate will work with a multidisciplinary team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI.

The key roles & responsibilities include, but are not limited to the following:

• Co-develop AI models to enhance and automate decision making
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Engage companies to understand their challenges and translate to research collaborations in AI
• Contribute to research and development in Cyber-Physical Production System technologies, including technology development, live production environment test-bedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related field.
• Candidates with an ambition and attitude for cutting-edge research are welcome to apply.
• Strong understanding of machine learning algorithms, statistical analysis, and data preprocessing techniques
• Experience with machine learning frameworks and libraries, such as TensorFlow, Keras, PyTorch, or Scikit-learn
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

The CPPS group is seeking a highly motivated scientist or senior scientist to lead in the development of AI technologies to deliver impactful and innovative digital technologies for predictive/prescriptive analytics and decision support. He/she will be expected to define growth opportunities and new ways to engage industry to advance AI for manufacturing, and look after a team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI. The key roles & responsibilities include, but are not limited to the following:

• Develop AI models to enhance and automate decision making and enable predictive/prescriptive analytics
• Define opportunities to push frontiers of AI research in manufacturing
• Formulate research direction and proposals for competitive funding to advance AI in manufacturing
• Engagement of companies to understand their challenges and translate to research collaborations in AI
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Contribute to research and development in Cyber-Physical Production System technologies
• Develop research proposals to secure competitive funding
• Lead technology development, live production environment testbedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• PhD in Computer Science, Data Science or Mechanical/Industrial/Electrical Engineering
• 7 years’ experience in developing and deploying machine learning and data analytics (for Senior Scientist)
• Strong leadership skills
• Programming/coding skills in developing AI and data analytics
• Skills in data modelling, machine learning, signal processing
• Good track record of publications
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

• Well Established Company
• Basic $3200 - $3500 + Commission + Allowance + Performance Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Ang Mo Kio
• Working day: Monday to Friday
• Working hours: 9am to 6pm
• Training provided for those without/lesser experience

Job Responsibilities:

• Establish sales pipelines by prospecting, forecasting and projecting expected sales volume and profit for existing and new products
• Ability to analyse market trending and competitors’ movement
• Maintains professional and technical knowledge by attending essential product / internal coaching workshops, and regularly business networking
• Sell to new, existing and potential prospects as well as provide sales support to partners to participate in closing and order or to facilitate and add value to the selling process
• Contributes to overall team effort in service delivery excellency
• Plan and execute sales activities, site visits/survey required
• Develop new customer accounts
• Pre-sales, quotation submission and support various sales activities that drive prospects through the awareness and consideration to decision-making phases of the sales cycle
• Provides product, service, or equipment technical and engineering information by answering to customers’ requests
• Develop and coordinate with Ops team in implementation of agreed solutions for customers
• Other ad hoc duties as assigned

Job Requirements:

• Minimum Diploma in Professional Certificate, Engineering (Mechanical), Engineering (Others) or equivalent
• 1 to 2 years of sales experience, preferably in security technology and IT/networking/PA field
• Possess valid class 3 license and with own car is an advantage
• Candidate without or with lesser experience are welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Basic Salary UP$4000 + Transport Allowance

• Company located at Tuas

• 5 Days work week: Monday – Friday: 8am – 5pm

• Well Established Manufacturing Company

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Understand the full requirements of all manufacturing and improvement project.
• Familiar with various laser systems as well as advance welding / cladding technique.
• Experience in robot programming for welding / laser cladding.
• Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.
• Generate PCR and manufacturing process plan.
• Generate engineering drawings and perform drafting.
• Support Asst. Engineering Manager on the job costing.
• Continuously explore for new manufacturing method or new external providers to support the production.
• Work closely with the Production team to resolve any production issue.
• Support the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Requirement

• Diploma / Degree in Mechanical / Manufacturing Engineering or equivalent
• 1 - 3 years of relevant experience in metal machining or oil & gas industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492