Responsibilities

• Setup, operate and maintain all types of conventional or CNC machines such as Milling, Lathe, Surface Grinding, Shaping, Hobbing, broaching and conventional machines in the cell/process.
• Setup, operate and maintain all measuring equipment, gages and fixtures for making accurate inspection checks.
• Perform simple troubleshooting of machines.
• Able to read and interpret blueprints.
• Maintain pertinent records; Shop-paper and work in accordance to technical instructions and drawings.
• Work in an orderly manner and keeping work areas, benches and machinery in a tidy and clean condition after used.
• Notify the Supervisor timely for any machine or tooling problems which could jeopardize product quality or infringe safe work conditions.
• Engage in any other activities or responsibilities as requested by the Supervisor

Requirements

• NITEC /Higher NITEC in Precision Engineering or equivalent.
• At least 2 years working experience in a Precision Engineering environment.
• Basic command of written and spoken English.
• Able to work weekly rotating shifts

Job Description

• Install, repair, test & commission cable systems (voice/data/fiber optics);
• Prepare/install cable pathways & supports where needed;
• Assist in the preparation of tools & materials used for daily work assignments;
• Troubleshoot cabling system issues & perform repairs & maintenance;
• Assist co-workers with installation & routine maintenance of structured cabling systems;
• Ensure quality, health/safety standards & report issues, if any;
• Any other duties as assigned.

Requirements:

• Minimum NITEC (Electrical Engineering/Electrical Technology/Built Environment) or work- related experience
• Good communication & team work skills
• Flexibility & willingness to work night shifts occasionally (as jobs require)

Location: Mandai

Carry out daily production activities that includes:-

• Feed-in of raw material or recycle product
• Packing of products
• Operate equipment and machinery to meet daily production target
• Ensure that quality and output is met
• Check and inspect production machinery or equipment
• Perform preventive maintenance and carry out basic repair
• Operate forklift to retrieve raw material and stack product from and into the warehouse respectively
• Update production record and activities
• Ensure that all production activities are carried out in accordance with Work Instruction (WI).
• Maintain good housekeeping of the production area
• Adhere to safety procedures and regulations

Job Requirements:

- O Level or S.P.M qualification

- Must be able to lift heavy objects < 25kg

- On-job training will be provided

Job Description & Requirements

As a Solution Provider/System Integrator of the followings:

· CCTV Surveillance Systems

· Security Card Access Control Systems

· Architectural Dimming Systems

Responsibilities

· Able to do maintenance/service

. Able to do troubleshooting

Requirements

· Nitec/Higher Nitec in Electrical/Electronics

· Min 1-2 years' experience in related field

· Able to work independently

· Able to work OT after working hours & Saturday, if jobs required

· Possess class 3 driving licence is an added advantage

Responsibilities include but are not limited to the following:

Carry out preventive/corrective maintenance and repair works on building/aircon maintenance

Co-ordinate all technical aspects in the technical team

Ad-hoc assignments as assigned

Job Requirement :

Possess Servicing, Electrical, or its equivalent knowledge/experience

Have good analysis and troubleshooting skills

Able to work individually as well as teamwork

Other Information :

Salary will be commensurate with job experience & qualification

5-1/2 days work week

Working location: East

Interested applicants, please get in touch with Mr. Raja @ 90307711

Job Description:

• Assist in the building & Testing of machine
• Assist in the troubleshooting, repairing & maintenance of electro-hydraulic machines
• Assist in the operation of machines durinf hire period

Job Requirements:

• Min NITEC in Mechanical/Electrical Engineering
• At least 2 years of relevant experience preferred
• Preferably with knowledge of hydraulics controls system
• Good interpersonal & effective communication skills
• Willing to travel overseas frequently
• Independant & responsible

Requirements:

· Candidate must possess at least NITEC/Higher NITEC in Mechanical/Electrical Engineering.

· Experience in Material Handling/ Automation/ Conveyor systems would be an Advantage.

· Able to read & understand Electrical Drawings or has PLC Controlled Systems Knowledge would be an Advantage.

· Proficient in MS Word and Excel

· Entry Level candidates is welcome to apply as Training will be provided.

Job Description:

· Perform Equipment Maintenance works according to Manufacturer’s Maintenance Instruction/Work Procedure and approved maintenance checklists.

· Carry out minor repair work as part of Preventive Maintenance work.

· Assist Supervisor during major repair work.

· To carry out ad-hoc duties assigned by Superiors.

Benefits:

· 5-day Work Week

· Annual performance bonus and year end AWS

· Medical and Dental Insurance (including family members)

Location:

· Changi Airfreight Centre / other Contracts assigned location.

Please email Resume to: [email protected]

Job Description & Requirements

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

Job Description

• Responsible for performing a variety of duties within a manufacturing environment.
• Duties related to production, kitting, packaging, shipping and receiving, and inventory control:
• Follow assembly and packaging work instructions to exact details and be able to understand and follow written and verbal instructions in English, typically related to safety, quality, and manufacturing processes
• Work efficiently on-line where tasks vary as different models move through the assembly process and demonstrate excellent understanding of daily priorities to meet expectations of internal and external customers.
• Duties may be related to installation, repair and support of manufacturing equipment.
• Involving inspections of raw materials and in-process and/or finished products to ensure compliance with Agilent’s quality and reliability standards.
• Maintain a clean and organized work area.

Qualifications

• Nitec / Higher Nitec / Diploma in Mechanical Engineering, Electrical Engineering or its equivalent
• Minimum1 to 3 years of experience in a Manufacturing environment
• Basic Microsoft Office skills (Word, Excel).
• SAP, MES experiences preferred

We are looking for a reliable, resourceful Building Technician who works independently with who can lead the Team.

• Ownership and responsibilities of assigned system & program
• Risk assessment, and test to meet factory standards
• Share and provide generous training to team members
• Respond to system failure escalation calls
• Supervise shutdowns
• Rectify system faults and restore the system back
• Collaborate daily with operation team
• Experience in system trouble shooting
• Skills in handling meeting
• Identifying system faults and root causes
• Fluent spoken and written English

Primary Roles & Responsibilities

The patching cabling between network equipment and client’s network

The installation of power cables from equipment to power supply in rack/cabinet/closet

The installation, troubleshooting and de-installing IT equipment (Servers / Network /

Storage / etc)

o Install/swap out devices (e.g., phone, computers, cables, boards, edge routers, switches and etc.)

Complete all hard and complex Move, Add Change (MAC) requests within the defined service levels

Act as interface between client’s associates and management

Provide hardware break-fix services for network infrastructure

Perform onsite call-through, data, voice, website and security testing

Perform back-up testing to ensure all systems are connected to the client’s network as directed

Support carrier testing of circuits

Assist with facilities efforts such as vendor coordination and vendor supervision

o Power and uninterruptable power supply (UPS) restoral

o Water problems,

o Emergency cooling restoration,

o Fire suppression exercises, restoration, and post fire events

Support inventory management activities

o Receiving inventory

o Tagging of assets

o Tracking spares (crash kits)

o Ordering inventory

o Updating inventory records

o Prepare and return damaged equipment

Act as an interface, as needed, between associates at the applicable location and centralized project / operations / MAC management

Requirements:

Must be proficient in utilizing technical tools such as BERT testers, cable testers, and fiber testers.

Requires experience in working in communications closets

o Must be able to perform rack and stack activities

Must be able to safely lift heavy objects

o Must understand cable patching processes and procedures in copper and fiber

o Experience in either or both CommScope and Corning structured cables (copper and fiber)

o Must have a basic knowledge of data communications networking.

Must be able to assist in troubleshooting issues

Must understand network terminology

Requires good interpersonal communications skills

o Must be able to explain technical issues in a way the client will understand an

issue

o Must be able to interpret a client’s issue in a way that will allow technician to facilitate a resolution

Education/Experience Requirements

• 5+ years of experience in Data Centre operations and environment
• Must have a basic knowledge of local and wide area networking.
• High school Diploma or equivalent required

EA License no: 96C4864

Reg No: R23115903

JOB DUTIES

• Work in a team on scheduled projects.
• Support local and overseas project/attachment.
• Overseas project attachment and support up to 12 months.
• Report to Team Leader/Supervisor
• Install, de-install, relocation and preventive maintenance of semiconductor equipment.
• Commissioning/decommissioning of semiconductor equipment.
• Weekly Service Report update
• Monthly Progress Report assessment

EDUCATIONAL QUALIFICATIONS

Possesses Diploma or above in Engineering or a related field

CRITICAL SKILLS/KNOWLEDGE

On-the-job training by OEM for the first two months

WORKING EXPERIENCE

At least 2 or more years experience working in semiconductor industry.

PERSONALITY TRAITS

• Team worker
• Industrious
• Proactive
• Positive mindset
• Disciplined
• Physically fit

OTHER ABILITIES/APTITUDES

• Ready-to-go for overseas job attachment/support up to 12 months.
• Work at different sites depending on the project.
• Monthly online team meeting on a Saturday morning

BENEFITS/INCENTIVES

• 5 days work week
• 14 days annual leave
• Additional 1 day annual leave every 2 years with the company, up to 20 days

Transport allowance upon probation completion

1. $600 for car owners
2. $300 for other modes of transport including public transport

Job Summary:

The service technician provides efficient after-sales technical services and support, including assembly, PDI, delivery and commissioning, trouble-shooting, maintenance and servicing of equipment and its related parts.

Job Description:

• To attend to, with urgency, all service calls and is responsible to provide efficient and reliable scheduled maintenance for all equipment. To ensure equipment is tested upon completion before handing over to clients.
• To, at all times, represent the Company in the best possible way, and to relate to clients with professionalism and integrity.
• To assemble, deliver and commission equipment at customer sites, and to train users on its operation.
• To observe safety precautions and to execute correct engineering practices at all times so as to minimise risk to self and others as well as damage to equipment and workplace.
• To maintain proper housekeeping and discipline both within the office floor and workshop as well as the client's work site so as to improve operational efficiency, whilst maintaining the good image of the Company.
• To be responsible to comply with the Group and Company Environment, Health and safety (EHS) policies and safe work procedures.
• To carry out service contracts which our company has with customers.
• To prepare parts recommendation of repairs to admin team for customers
• To assist the manager in seminars, workshop and product demonstration on ad-hoc basis.
• To complete service order as per completed job.
• To assist in improving and building up the Service unit to achieve the Company's objective of being a leading service provider in terms of its reliability and professionalism.
• To pursue and achieve total quality and competitive advantage through high degree of self-discipline, commitment and involvement at all levels of the organization as well as with its clients, suppliers and principals.
• Any other duties as assigned by the company.

Experience & Qualification:

• NITEC or Diploma in Automotive Technology, Mechatronics or Mechanical Engineering.
• Overhead crane service and repair experience is preferred.
• With Class 3 license is preferred.
• Able to work independently with minimum supervision.
• Technical knowledge in automotive repairs.
• Team player with good discipline and work attitude.

Job Requirement

• Grow, maintain and transplant flowers, shrubs and trees
• Maintenance and installation of sprinkler systems
• Construct walkways, walls and small foot bridges
• Follows plans and specifications, inspects and directs the planting of landscape material associated with improvement, beautification, and erosion control
• Create and adhere to various watering and feeding schedules
• Plan new growth planting patterns in distinct seasonal changes
• Identify detrimental insects or plant disease and eliminate them
• Ability to adhere to a predetermined budget
• Operate a variety of mechanical equipment
• If certified or under the supervision of a certified applicator will apply chemicals

Requirement

• Primary/Secondary/’O’ Level Education with relevant landscape gardening experience.
• With WSQ Landscape Operation (Entry Level) Certification will be an advantage.
• No age limit with ability to work outdoors.
• Physically fit to handle tools and move around easily during work.

Working Hours and Office Location:

· 5.5-day work week

· Office location: Mandai Estate

· Work location: Various Sites

Responsibilities:

• Conduct product benchmark and qualification testing.
• Monitor product on-going reliability performance.
• Compiling and reporting of evaluation test results.
• Setting up, maintenance and calibration of test equipment.
• Participate in laboratory safety and quality management system audit
• Perform ad-hoc administrative works for Singapore Technical Centre (STC) laboratory including laboratory housekeeping, stock check and inventory of chemicals and consumables etc.

Requirements:

• Minimum Diploma in Electrical Electronic Engineering or related disciplines.
• At least 1-2 years of relevant work experience.
• Good team spirit and sense of accountability.
• Strong communication and interpersonal skills.
• Proficient in both English and Chinese languages as liaison with China and Hong Kong counterparts is required.
• Self-motivated, positive mindset and pro-active.

Job title will commensurate with qualifications and experience. Seasoned candidates with relevant experience may be offered an Assistant Engineer title.

About GP Batteries

GP Batteries International Limited is principally engaged in the development, manufacture and marketing of batteries and battery-related products. Since its establishment under Gold Peak Technology Group in Hong Kong, GP Batteries has rapidly expanded to become one of the world's major suppliers of primary and rechargeable batteries. It is one of the largest consumer battery manufacturers in China. It supplies an extensive range of battery products to original equipment manufacturers, leading battery companies as well as consumer retail markets under its own GP brand name.

GP Batteries' production facilities are located in China, Vietnam and Malaysia, supported by marketing and trading offices spanning across Asia, Europe and North America. The Group currently employs about 5,200 people worldwide and occupies a total floor area of approximately 307,800 square metres.

We offer attractive salary, fringe benefits and long-term career development opportunities to the right candidate. Interested parties, please upload your full resume (include current and expected remuneration package).

We are an equal opportunity employer. The information you provide will be treated in strict confidence and used for recruitment purpose only. You may visit us at www.gpbatteries.com for more information.

We regret to inform that only short-listed candidates will be notified.

(2 years contract renewable)

• 5 days, 8.30am- 5.50pm
• Location: East, and client's site whenever required

1. Associate System Engineer

• Salary: S$ 2,800 ~ 3,000 + allowance

2. System Engineer

• S$ 3,500 + Allowance

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

• Work with Precision lapping machine skill operation
• Responsible for process and quality inspection
• Any other ad-hoc duties as assigned

Requirements:

• Min Higher Nitec/Diploma in Electrical/Mechatronics
• Training provided
• Able to read technical drawing
• Knowledge in Auto-Cad
• Able to use measuring tool (micrometer, height gauge, CMM)
• Working Hours: Mon - Fri, 8:30am - 6.15pm
• Location: Ang Mo Kio
• Salary: Up to $3000
• Able to start work immediate or on short notice

How to apply:

Interested applicants kindly state your expected salary, last drawn salary and starting date.

We regret to inform that only shortlisted candidates will be notified.

Log on to www.e-cruitteam.com.sg for more job opportunities!

EA Personnel: Teo Kai Xin, Joey

EA Reg ID: R23114229

EA Licence No.:19C9603

Job Description:

The candidate will be responsible to perform vehicle repair work outlined on repair order with efficiency and accuracy in accordance to Ferrari standards.

Possess the ability to diagnose cause of malfunction and execute repair work to meet customer promised time.

Job Requirement:

- Minimum NTC 2/NITEC in Automotive with least 3 years of experience in automotive and/or luxury brand

- Knowledge of troubleshooting/repair techniques in Ferrari/other Luxury brands or Supercars will be added advantage

- Proficient in MS office and MODIS procedures will be a plus

- Proficiency in PDI and technical assistance procedure (Escalation of tech request to factory whenever required)

- Knowledge of repair techniques / also for older cars

- Basic writing skills (to record work performed and recommended future service requirements on Repair Orders

- Sound knowledge of vehicle electronic components, theory, systems and testing tools and procedures

- Skilled in diagnosis and repair all key vehicle systems and components

- Knowledge of the proper procedures for handling hazardous materials, using tools & equipment

- Knowledge of the proper procedures for ensuring the Technician’s own safety, the safety of his or her co-workers, and the safety of customers and their vehicles

- Ability to read and interpret Repair Order to execute repair work independently

- Basic customer communication skills in event of customer contact

- Fixing vehicles right the first time

- Test driving vehicles, if necessary, to verify customer complaints (For candidates with prior relevant experience)

- The ideal candidate should ensure that repair tasks are completed and delivery deadlines are met. The Technician is required to maintain a current knowledge of all vehicles and their service needs as described in manuals, technical bulletins, and training programs.

We regret that only shortlisted candidates would be notified.

Interested candidates, please apply in through emailing your CV to us at: [email protected]

Responsibilities:

• Executing electrical preventive maintenance to maintain and sustain the food production equipment, facilities and electrical system.
• Supporting Engineers in setting up of the new equipment & systems and transfer equipment for new projects.
• Troubleshooting, maintaining and repairing equipment and electrical / electronic systems.
• Preventing fire and ensuring safety of personnel and equipment and preventing any incidents and accidents from possible electrical hazards.
• Implementing projects to improve energy efficiency for all of systems.
• Maintaining proper records for works of repairs, maintenances and projects.
• Exhibiting good work discipline and housekeeping habits, and adhering to all safety regulation and house rules at all times.

Pre-requisites:

• Minimum NiTEC in Electrical Engineering or related fields.
• Experience in manufacturing environment with handling machine repair and troubleshooting inclusive of preventive maintenance.
• Salary will commensurate with qualifications and experience.

Summary of Job Scope:

To work closely with Microbiologist, Production, QC personnel and QA department to ensure all apparatus and end products are safe and free from any contamination.

• Perform QC checking, sampling and routine analysis of in-coming raw material.

• Operation of High Performance Liquid Chromatography (HPLC) and laboratory analytical instrument.

• Perform sampling, routine checking and recording of packaging material and printed packaging material (Label, leaflet, unit box, tube).

• Carry out sampling and testing for daily purified water system monitoring.

• Maintain and record retained sample of raw material.

• Maintaining and recording the temperature and room humidity in equipment room.

• On line checking and recording of in-process granules and tablet

• Checking and recording of in-process syrup, cream.

• Checking and approval of packing process.

• Daily stock card update for working standard.

• Perform identification test for in-coming raw material.

• Routine analysis and recording of raw material, intermediates and finished product.

• Carry out stability testing.

• Carry out dissolution profile test and monitoring.

• Carry out Analytical method validation.

• Carry out calibration/ performance verification of laboratory equipment/ Apparatus.

• Quality Control check on raw material dispensing.

• Ensure coding of labels and bar code labels are complete & accurate.

• Preparation and recording of reagents and chemicals.

• Preform analysis and support for working standard preparation.

• Maintain tidiness and cleanliness of laboratory equipment and workplace.

• Practice Good Laboratory Practice (GLP) and laboratory safety.

• Maintain QC document in laboratory to ensure up to date and accurate.

• Update laboratory equipment log book / Quality Control (QC) record book and all other QC documents.

Requirements:

• Diploma/ Degree in Chemistry or related field
• Able to perform independently in a fast paced environment
• Able to perform multi-task as assigned by superior
• No prior experience required (Fresh grads are welcome to apply)
• Must be able commit to OT and Night Shift (when necessary)

About the Company

Casa Creation is the authorized distributor for SK Magic, one of the world’s most advanced home appliance makers originating from Korea. Combining sleek design, effortless use, and amazing health benefits, we believe that our SK Magic product range - particularly state of the art water and air purifiers - are the fast-rising appliances of the future in today’s hectic yet discerning society.

Vision

Creating a clean and safe living environment, through the pursuit of fundamental health care.

Core Values

1. Health: We believe in creating a clean and safe environment, through the pursuit of fundamental health care
2. Eco-Friendliness: Our products reduce resource consumption, minimise pollution and reduces the production-use-disposal process.
3. Convenience: We aim to minimise labour for all our customers, creating a seamless experience and curating our products to suit each of your needs.

Responsibilities

• Install company water purifiers on-site, including set up of parts, troubleshooting, and quality checks.
• Perform routine maintenance, such as inspecting parts, checking, and replacing filters.
• Perform repair works as necessary.

Skills Required

• Minimum 1 year experience in plumbing or related technician work.
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Customer oriented with positive work attitude.

Other Requirements

• Possess a valid Class 3/3A driving license.
• Able to work 5.5 days a week.

Responsibilities:

• Knowledge in servicing and maintenance for refrigeration / machines electrical.
• Identify faults, troubleshoot, and repair various commercial kitchen equipment.
• Performing repair jobs promptly and efficiently.
• Submission of daily report of servicing & maintenance functions.
• Ensuring all works compliance with appliance standards and Health and Safety Act.
• Maintaining service vehicle in good condition.
• Other relevant skills or experience we will consider to be of benefit.
• Any other duties as assigned.

Requirements:

• Hands-on experience in installation, maintenance, troubleshooting and/or repairs in electrical machines and mechanical diagnostic skills.
• Possess a valid Singapore class 3 driving license is preferred.
• Other relevant skills or experience we will consider to be of benefit.
• Basic and/or excellent written (English).

Note:

• Only shortlisted candidates will be notified.

Job Responsibilities:

• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Multinational corporation
Basic + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

ALG is recruiting for an Avionics Technician for our Aerospace Client.

This is a permanent role is based in Singapore. Candidates who have just graduated with a diploma in electronics are welcome to apply.

PRINCIPAL ACCOUNTABILITIES

• Set up and operate test equipment in the repair, overhaul and modification of Avionics Line Replaceable Units.
• Conduct regular functional/self test and calibration on Automated/Manual Test Equipment.
• Ensure all test equipment are within calibration due-date before testing of LRU is carried out.
• Perform modification in accordance to service bulletins on LRUs as and when required.
• Troubleshoot customer's unit and return it to serviceable condition in the most efficient manner.
• Verify and ensure all repairs or modifications carried out conform to quality and workmanship standards.
• Maintain good housekeeping practices at work place and test benches at all time.Carry out duties as assigned by the Supervisor to meet team’s objectives.

KNOWLEDGE AND SKILLS

• Minimum Diploma in Electronics a must.
• Minimum of one year experience in Avionics equipment repair; those with no experience is welcome.
• Able to read digital and analog electronics circuitry.
• Able to perform manual soldering on electronics components.
• Have good color perception.
• Able to communicate effectively in English, both verbally and in writing.
• Ability to interpret schematic diagrams, troubleshoot and repair PCB assembly down to component level is highly desired.
• Competent to conduct tests according to the Component Maintenance Manual.
• Able to interpret, evaluate test results and write test report.

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA Licence Number: 11C4379 | Registration Number: R22105273

Work Hours:

• Monday - Friday, Shifts

Responsibilities

• Assist engineer to carry out all the Test related activities
• Support & implement different product configuration setup
• To test, analyze and perform troubleshooting on product failures
• Working closely with process and test engineers on yield improvement
• Participate in the Kaizen activities
• To update test tracking records
• Prepare and update Working Instruction
• To support the NPI Process and production runs
• Participate in ISO activities (implementation & maintain)

Requirements

• Nitec & above qualification in engineering with at least 1-3 years of working experience in testing and debug environment
• Good team player
• Ability to work with Peers, engineers, and superiors
• Able to multi-task & work under pressure
• Good understanding of test methods and concepts
• Knowledge of programming and debugging skills

RBA Compliance.