Working hours: Mon to Fri, 8:30am to 6pm

Position Summary

This position is responsible for physical and technical tasks related to Data Center Infrastructure equipment.

Primary Responsibilities

• Perform physical and technical tasks of intermediate & escalated complexity on Data Center infrastructure equipment including but not limited to servers infrastructure, network infrastructure, or other equipment on the DC floor, without immediate supervision.

• Work alongside Technicians in installing, troubleshooting, and maintaining servers, networking equipment, and cabling (requires moving and racking equipment)

• Fix broken servers (replace hard drives, replace bad sticks of RAM, etc.).

• Use hardware/software tools and workflows (automation) in support of these tasks.

• Strictly follow all policies, processes, and procedures related to the activities and data center environment.

• Perform maintenance on a timely basis with adequate recordkeeping.

• Maintain equipment in running order with minimal downtime.

• Ensure a safe working environment and perform maintenance in a safe manner.

Requirements

• NITEC in IT or technical based qualifications.

• Familiar and comfortable using and working with IT equipment and software.

• Experience in repair of electronics components of computers.

• Scissor lift license would be an added advantage.

You will assist pharmacists in ensuring the availability of medications and facilitate patient care through processing of medication orders which includes typing, packing and counselling. You will also be required to prepare extemporaneous syrups and to provide customer service and handle simple enquiries on Over-The-Counter medications and other available retail products.

In addition, you will be required to perform administrative duties e.g. pre-packing, cycle counts and topping up of stocks. You may also be given supervisory duties such as roster planning etc.

Requirements

• Diploma in Pharmaceutical Science from local Polytechnic, WSQ Advanced Certificate in Pharmacy Support or equivalent
• Work experience in retail/hospital/clinic will be an advantage
• Able to work on weekends and public holidays (PHs)

Responsibilities:

• Site execution of pre-commissioning, commissioning and function testing of LV Switchgears, UPS systems, transformers, VFDs, distribution panels, generators, lighting circuits, etc.
• Carry out isolations / de-isolations on electrical equipment up to and including 690V as an Authorized Electrical Person (AEP) as approved by Responsible Electrical Person (REP).
• Attend daily Tool Box Talks to ensure full understanding of work scope as per PTW requirements.
• Carry out commissioning testing activities safely to comply with site PTW/LOTO and safety regulations and procedures.
• Assist vendors in carrying out pre-commissioning and commissioning scope of work related to vendor packages.
• Carry out troubleshooting of faults arising during commissioning tests.
• Filling up checksheets, test records and prepare red-line mark-up drawings, etc. during commissioning tests.
• Maintain latest drawings / documentation on site including all red-line markup drawings.
• Planning and undertaking scheduled maintenance.
• Responding to breakdowns
• Diagnosing faults
• Supervising engineering and technical staff.

Requirements:

• Diploma in Electrical Qualification.
• At least 7 years working experience in electrical equipment commissioning / operation & maintenance.
• Experience in testing and fault-finding troubleshooting of HV/LV transformers, UPS, batteries, motors, LV switchboards, VT, CT, motor starters, control panel, power distribution panels, lighting system, socket outlets, heat tracing, Nav Aids etc.
• Effective team player and ability to communicate in English.
• Familiar with Permit –To-Work system.
• Familiar with ATEX and Hazardous Area Equipment.
• Understanding and application of Electrical Safe Working Practices on Live equipment.
• Class 3 driving licence in advantage
• Abel to work rotating shift.

Job Highlights

• 5.5 working days
• with OT
• Medical Benefits
• Company Shuttle Bus

Position objective and summary

• To ensure all waste types are properly identified, received, sorted, treated and disposed of within regulatory requirements
• Monitor, plan and organise the waste/wastewater treatment system processing activities
• Submit reports on performance and progress.
• To ensure Evaporator systems running smoothly with pre-set parameters

Main tasks / activities / responsibilities

• To operate the Evaporator systems safely according to protocol, work procedures & SOPs and to advise line supervisor of any abnormality
• Assist with incoming waste management and system & equipment maintenance
• Conduct sampling of treated waste samples as instructed by line Lead
• Work with Line Lead, Operation Manager and Consultants to eliminate any possible bottlenecks in waste treatment procedures
• To ensure company’s treatment procedures are in line with regulatory requirements

Job requirements

• Willingness to communicate & build rapport with team of diverse cultures
• Solid organizational skills, including multi-tasking and time management
• Experience working in EHS and Permit-To-Work system
• Able to work independently
• Willingness to assist on the ground when the need arises
• Able to perform 12hr rotating shift
• Experience in evaporator & process plant supervisory role will be advantageous

The Equipment Technician II is responsible, as member of the interdisciplinary operation team, to provide technical support for production operations in meeting output and quality. This includes transfer, document and repair. Further the Equipment Technician will support the Equipment Engineer in required training activities to ensure the processes will be correctly operated. Also his/her expertise will be required to optimize the infrastructure of the facility.

Your Responsibilities

• Provide first level troubleshooting and resolve production stoppages due to equipment issues
• Minimise equipment downtime and ensure production meets target output and yield
• Document and report all production line stoppages due to equipment or technical issues
• Monitor machine output and ensure the required standards are met
• Replenish production auxiliary materials and tools in the respective workstations
• Perform process control check where necessary
• Participate in and execute preventive maintenance and calibration activities for production and measuring equipment
• Ensure work stations are in excellent housekeeping conditions
• Collaborate with engineers and production in continuous process improvement projects
• Maintain and build up relationships with local vendors
• Other duties as assigned
• Able to perform shift work as and when necessary

Your Profile

• Higher NITEC or Diploma in any Engineering discipline
• At least 3 years of relevant experience, preferably in medical device industry
• Prior technical experience in Electronics / Manufacturing environment will be added advantage
• Meticulous, responsible, flexible, independent and customer oriented
• Experience working in project environment with good problem solving skills

What we offer

• being encouraged to think and act entrepreneurially
• working in global teams and projects
• developing yourself professionally

Responsibilities:

• Perform maintenance, repair or overhaul of Air compressor
• Lead the team of technicians and train in troubleshooting, diagnostics and best practices
• Submission of Service Reports timely manner.
• Communicate with Internal/Customers on job related issues, recommendations, unforeseen problems
• Identify potential risks to the team and/or the equipment or job.
• Ensure safety observances on site both for self and team and highlight safety risks to Manager.
• Upkeep of equipment and tools used as well as proper housekeeping of your work surroundings.

Requirements:

• ITE/Diploma in Engineering
• Experience in maintenance and repair of major Air Compressor brands
• Familiar with maintenance and repair of Air treatment equipment like Air Dryer and Filter.
• Knowledge of Vacuum pumps, blowers or other rotating equipment such as pumps is a plus.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

About the Role:

• Assist the Building Manager in the daily operations
• Troubleshoot building services failures
• Ensure efficient and effective maintenance of Client's facilities through routine check and preventive maintenance strategies
• Preparation of monthly and incident report pertaining to the site(s)

About You:

• Diploma / Higher Nitec / Nitec in Facilities Management / Mechanical Engineering / Electrical Engineering / Building Services or equivalent.
• Min 3 years relevant Facilities Operation experience.
• Comfortable to work morning and night rotating shift.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status.

We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

JOB HIGHLIGHTS

• Attractive medical benefits
• Career development and growth
• 5 day work week
• 5 mins walk from Ubi MRT

Job Description:

• Responsible to troubleshoot and repair PCBAs from production output and customer returns
• Responsible for product quality inspections
• Prepare raw materials for production
• Validate all finished goods to ensure compliance with customer requirements before each delivery
• Other duties as and when assigned

Job Requirements:

• Minimum a NITEC or Diploma in Electronics/ Mechanical/ Manufacturing with at least 2 years of working experience in a manufacturing environment
• Hands-on experience in the production process, PCBA troubleshooting and repair

All resumes are treated with the strictest confidence. We regret that only shortlisted candidates will be notified.

The Facilities Technician is responsible for daily engineering sections to support the hotel operations.

Primary Responsibilities

Daily Engineering Operations

• Operates the equipment to deliver a comfortable room temperature to hotel areas.
• Operates the equipment to deliver clean water to the respective services in the hotel.
• Operates the equipment to deliver hot water to the respective services in the hotel as required.
• Operates the equipment to deliver clear and sharp images from the television and satellites equipment to hotel guest suites as required.
• Operates the equipment to deliver audio visual support to the hotel event as required.
• Assists and supports the emergency operations team during an emergency and a crisis in a timely and efficient manner.

Shift Operations

• Rectifies equipment and facilities breakdown as required.
• Replaces faulty components / lighting bulbs as required.
• Responds to requests relating to technical issues from hotel patrons in a timely and efficient manner.
• Collects daily utilities meter readings and verify plant / equipment are in proper operations as required.
• Patrols hotel grounds to verify fire and safety risk as required.
• Patrols hotel grounds to verify all lightings on hotel grounds operate within the preset timings as required.

Plant and Facilities Services

• Operates plant facilities to support every aspect of hotel operations in a timely and efficient manner.

Preventive Maintenance

• Rectifies / Repairs damaged furniture to the highest quality level and in a timely manner.
• Rectifies / Paints defective building surfaces to the highest quality level and in a timely manner.

Other Responsibilites

• Operates the hotel elevators and dumbwaiters as required.
• Operates the hotel swimming pool and water fountains as required.
• Operates the hotel fire protection services as required.
• Operates the hotel drainage and sanitary system as required.
• Operates the hotel television and satellites system as required.
• Operates the hotel public music system as required.
• Operates the hotel lightings and dimming system as required.

Involvement In Wider Job Function Actions/Relationships

• Upholds Accor Values of Guest Passion, Sustainable Performance, Spirit of Conquest, Innovation, Trust and Respect, in the execution of all duties and responsibilities.
• Participates and supports sustainability in Corporate initiatives and programmes.
• Performs any other duties and responsibilities that may be assigned.

Candidate Profile

Knowledge and Experience

• Nitec Certificate in Building Facilities Maintenance, Electrical / Electronics, Air conditioning servicing and/or Plumbing.
• Minimum of 1 year of relevant experience.
• Good working knowledge of Microsoft Office.

Competencies

• Detailed Engineering knowledge.
• Planning ahead.
• Great communicator.
• Ability to communicate with all levels of colleagues.
• Service oriented professionalism.
• Ability to contribute in a team environment.
• Multicultural awareness to work with colleagues from diverse cultures.
• Responsive to change within the team.
• Sense of urgency and able to set priorities.

Benefits of Joining Raffles Hotel Singapore

• 5-day Work Week.
• Duty Meals are provided.
• Colleagues’ Discount and/or Preferential Room Rates at worldwide Accor Hotels.
• Flexible Benefit – Dental/Optical/Vacation Expenses/Children’s Education.
• Medical and Wellness Benefit.
• Comprehensive Insurance Coverage.
• Local/Overseas Career Development & Growth Opportunities.
• Holistic Learning and Development Opportunities.

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Laboratory Technician to be part of their Labortory Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Laboratory Technician:

• Assist in routine lab tasks such as paint preparation, panel setup, and airless spray applications.
• Conduct sampling, testing, and analysis for paint products.
• Support chemists in development projects, including managing stock levels for panels, raw materials, and lab supplies.
• Participate in trial applications and inspections outside the lab under supervision.
• Handle non-chemical waste disposal and maintain a safe work environment by following ISO, safety, and environmental standards.
• Communicate progress or delays effectively with the line manager.
• Ensure workplace safety, especially in handling chemicals, and follow preventive measures to reduce risks.

Requirements:

• Diploma in related field
• Entry level are welcome to apply. Training provided.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

The position is responsible for daily engineering sections to support the hotel operations.

Primary Responsibilities

Daily Engineering Operations

• To cut, fabricate and install wooden and other structures according to specifications.
• Reads blueprints, drawings and sketches to fully grasp requirement.
• Takes measurements and calculate the size and amount of material needed.
• Cut, shape and smooth lumber and other materials (e.g. fiberglass) according to measurements.
• Builds window frames, doors, staircases and frame buildings by using raw materials or pre-constructed items.
• Lays out floorings, roofing or drywalls ensuring they are leveled and compatible.
• Carves and assembles furniture, cabinets, shelves and other items and install them where designated.
• Builds scaffolding and other construction structures.
• Rectifies equipment and facilities breakdown as required.
• Responds to requests relating to carpentry issues from hotel patrons in a timely and efficient manner.
• Replaces faulty components / parts as required.

Preventive Maintenance

• Rectifies / Repairs damaged furniture to the highest quality level and in a timely manner.
• Rectifies / Repairs defective building surfaces to the highest quality level and in a timely manner.

Involvement In Wider Job Function Actions / Relationships

• Upholds Accor Values of Guest Passion, Sustainable Performance, Spirit of Conquest, Innovation, Trust and Respect, in the execution of all duties and responsibilities.
• Participates and supports sustainability in Corporate initiatives and programmes such as Planet 21 – Corporate Social Responsibility, Diversity and Inclusion, Women at Accor Generation, etc.
• Performs any other duties and responsibilities that may be assigned.

Candidate Profile

Knowledge and Experience

• Proven experience as carpenter
• Hands-on experience in working with carpentry materials
• Excellent understanding of carpentry techniques and methods of installation and construction
• Proficient in using electrical and manual equipment and measurement tools (powered saws, hammers, rulers etc.)
• Ability to read technical documents and drawings
• Willingness to follow safety guidelines at all times
• Good knowledge of English
• Good understanding of basic math
• Good physical condition and endurance
• Related or relevant carpentry training/certification preferred.

Competencies

• Detailed Engineering knowledge.
• Planning ahead.
• Great communicator.
• Ability to communicate with all levels of colleagues.
• Service oriented professionalism.
• Ability to contribute in a team environment.
• Multicultural awareness to work with colleagues from diverse cultures.
• Responsive to change within the team.
• Sense of urgency and able to set priorities.

Benefits of Joining Raffles Hotel Singapore

• 5-day Work Week.
• Duty Meals are provided.
• Colleagues’ Discount and/or Preferential Room Rates at worldwide Accor Hotels.
• Flexible Benefit – Dental/Optical/Vacation Expenses/Children’s Education.
• Medical and Wellness Benefit.
• Comprehensive Insurance Coverage.
• Local/Overseas Career Development & Growth Opportunities.
• Holistic Learning and Development Opportunities.

Reporting to the Engineering Manager, you are responsible for supporting and executing the setup of the Packaging operations. This involves working closely together with the Capital Project team to ensure Safety, Quality, Compliance and Operational aspects of the packaging lines are adequately included during the design and construction phase. Post construction and qualification, as the team prepares for commercial supply, you will support the engineering and maintenance activities to ensure they meet GMP, regulatory and supply requirements.

In this role, you will:

• Participate actively as part of the Site start-up team in equipment FATs and site qualification activities (IQ, OQ and PPQ) for Syringe and Vial Packaging lines.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using MPS.
• Build future-ready manufacturing facility and position Singapore as strategic site for new products and innovation solutions in the Global Network.

Key Responsibilities:

Safety & compliance

• Uphold and comply with safety standards and never compromise on patient, team and personal safety.
• Participate in Safety, Health, and Environment (SHE) improvement initiatives.
• Implement corrective and preventive actions as recommended from investigations, regulatory inspections and internal audits.
• Understand and ensure Safety and cGMP requirements are met. Ensure equipment related activity is completed according to established procedures and all associated documentation is completed to a high standard.
• Participate in Emergency Response Team (ERT) as a team member when assigned.

Enhance and uphold Maintenance quality

• Execute maintenance and improvement activities within the IPT, ensure preventative maintenance is completed according to schedule requirements, and support equipment change control implementations.
• Reduce equipment downtime and enhance equipment performance through quality preventive maintenance works.
• Executes CMMS Work Instruction from Packaging line (e.g. Isolation and Reconnection of electrical supply, replace faulty part, troubleshoot, repair E/I and mechanical faults).

Operations excellence

• Support and meet performance metrics of the assigned operations.
• Proactively assess and carry out preventive maintenance and corrective repair works on packaging, robotic and conveying system.
• Contribute to maintain a high level of good housekeeping and carrying out operations within accepted GMP and HSE practices.
• Resolve issues in a timely manner and minimize equipment down time.
• Participate in Continuous improvement initiatives. Identify and report improvement for routine work activities.
• Highly effective worker; resourceful with a “get-it-done, can-do” attitude.

Problem solving

• Analyze and recommend solutions for identified issues.
• Support Production and Maintenance teams on problem solving and troubleshooting.
• Able to properly assess the situation and understand when to escalate to a higher level.
• Work together with the Engineering team to use 5S tool to maintain the working environment and perform Kaizen for improvement activities.

What are we looking for?

Qualifications & Experience

• Nitec/ Diploma in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 3-5 years of maintenance experience in the chemical or semiconductor industry.
• Experience or knowledge of PLC’s/HMI’s, electrical protective devices will be an added advantage.
• Good oral/written communication and interpersonal skills.
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Basic knowledge in using Microsoft Office, including MS Word, MS Excel, MS PowerPoint

Professional Competencies

• Resilient and resourceful
• Continuous learning mindset
• Foster teamwork and cross collaboration
• Strong work ethics
• Result driven mindset

Job Requirements

• Physically fit as the job requires employee to stand, walk, crouch, lift, twist, climb and reach.
• In addition, employee may be required to stand for a period of time, climb flights of stairs, and wear hearing protection equipment as required by the job.
• May be required to be on standby for any emergency repair after office hours, weekends and public holidays.

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only.
• PMETs/Mid-Careerist with minimum 2 years working experience.
• Open to two years contract.

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path.
• A state-of-the-art facility that delivers solution to its customers world-wide.
• Highly engaging team that aims to innovate the future.

Job Responsibilities

• Home Automation / Systems Integration projects for Hotels and Condos.
• Ensure consistency in execution of project activities.
• Testing and commissioning of project system.
• Identify and resolve project issues.
• Ensure on time submission of work done, certificate duly signed by client representative for monthly progress claims submission.
• Ad-hoc duties assigned.

Job Requirements

• Nitec & above
• Training provided - Welcome entry level
• Mandarin speaking - to work with Chinese Associates
• Office location at Ang Mo Kio
• Able to travel to project sites at Town area
• 5 days work (Monday to Friday , 9am to 6pm)
• Salary up to $2400 - $3200

Interested applicants pls submit your MS word resume. Shortlisted candidates will be contacted soon. Thank you.

Permanent Night Shift (11pm-7am)

Our client

MNC facility management /M&E engineering company in building and industrial market

Job scope

· To troubleshoot, repair , maintain mechanical/electrical services, plumbing & sanitary services, aircon servicing and maintenance, ACMV systems, chillers, and electrical control system.

Requirements

· Nitec in Mechanical/Electrical or Facilities Management or its equivalent

· Hands on experience in Building Facility Maintenance services n aircon n chillers

· Training will be provided for fresh graduate

Benefit:

• Basic salary up to $2300 - $3000
• OT applicable
• 5day work
• AWS + Bonus

Job Scope:

• Perform mechanical/electrical maintenance in forklift or automotive vehicle department
• Repairing and maintenance of forklift at client site
• Troubleshooting and testing of forklift at workshop
• Other duties as assigned

Requirements:

• Candidates with hands on electrical repair experience will have added advantage
• Class 3 driving license is a must

Please submit your updated resume in MS word format by using the APPLY NOW BUTTON.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Cheang Wei Yang (R21102313)

Our client is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies.

MODULE TECHNICIAN (TEST EQUIPMENT)
Salary: Up to $2,600, OT payable
Duration: 1 year contract (renewable)
Working Hours: 5 days, either Sunday to Thursday or Tuesday to Saturday, 8:15am to 5:30pm
Location: Woodlands

Roles and Responsibilities:

• Perform Preventive Maintenance (PM) and troubleshooting of equipment to ensure success & survival rate to meet module goal
• Follow SOP and carry out CAS per specification
• Execute good maintenance of support tool
• Support the running of production in the Module and ensure equipment readiness and worthiness for production
• Execute in-depth preventive maintenance (PM) as per PM schedule and specifications
• Troubleshoot basic equipment related issues and minimize equipment downtime
• Assist Engineer in the installation and hook up of new or upgrading equipment
• Know how to use SPACE to monitor SPC charts.
• Understand all the PR rules and follow CAS correctly
• Know how to use measurement instruments effectively in data collection. Able to create metrology job files correctly (equipment list to be defined by the Supervisors)
• Assist in implementing equipment improvement projects
• Maintain good housekeeping in the production floor / sub-fab / office and maintenance support areas
• Ensure and follow good safety practice and also safe custody of tools, equipment and other properties belonging to the Module
• Assist new Technicians on their On-The-Job-Training (OJT) by acting as their buddy
• Provide proper and accurate passed down of line issues and documentation (fill up and file the checklists)
• Wafer scrap reduction awareness
• Coordinate with Specialists to ensure efficiency of work to meet Mfg and Module objectives.
• Responsible and accountable for complying with and implementing environmental, health, safety and security (EHSS) system, policies, procedures and guidelines that are applicable to your scope of work, thereby maintaining a healthy and safe workplace.

Requirements:

• Nitec/ Diploma in Engineering
• Good verbal and written communication skills
• Team Player
• Good ownership and accountability

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/10174

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

• Well Established Company
• Basic $2000 to $3000 + AWS + VB
• Working location: Hougang / Site (Island Wide)
• 5 days’ work week (8:30am to 5:30pm)
• Communications equipment (Radio; Network; Wireless)
• Training Provided

Job Responsibilities:

• Carry out daily preventive maintenance and corrective maintenance of Radio, Network and Wireless equipment at site, including inspection, troubleshooting and replacement of faulty equipment
• Run tests and interpret results to ensure equipment is operating functionally
• Assist engineer in-charge to supervise site works
• Communicate with customers and various stakeholders of the project
• Supervise subcontractors for site works

Requirements:

• NITEC and/or Diploma in Electrical / Electronic Engineering or equivalent
• Candidate without experience is welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Conduct regular inspection repairs and preventive maintenance on equipment, breakdown.
• Identify electrical and mechanical faults. Perform tests and resolve the technical issues
• Order and replace parts, liaise with suppliers to ensure proper procurement.
• Maintain clean work environment and ensure contractors follow safety rules.
• Assist in preventive mainteance and breadk of faciloties
• Assist in administrative duties such as incident report and facilities records.

Requirements:

• ITE/Diploma in Electrical/Mechatronic Engineering
• Min 3 years of relevant experience
• Knowledge in electrical system and components
• Ability to work Overtime when necessary

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

Company’s Profile
Founded in 2008, Global TechSolutions (GTSS) is a trusted name in semiconductor equipment manufacturing, with over a decade of experience serving front-end semiconductor wafer manufacturers. Our team, backed by strong OEM expertise, excels in repairs, refurbishment, installations, and field service support.

Benefits:

• Guaranteed AWS

• Performance bonus

• Increment after probation (subject to performance)

• 1 year cash completion bonus

Salary Package:
- Basic Salary: $2200
- Shift Allowance

- Fixed monthly attendance allowance

- OT pay eligible

Working Location: Kranji

Working Hours: 12 hours shift work, (4 days work, 3 days off | 3 days work 4 days off)

Key Responsibilities:

• Perform robot PM: parts cleaning & greasing, replacement of sensors, motors, motor drivers etc.

• Installation of vacuum valves, fore line pipes, heater jackets.

• Support tool owner engineer to do technical activities in fab: trouble shoot, modification, installation, de-installation.

• Support 6S & logistic activities (parts cleaning, arrangement, label-ling, housekeeping.

Requirements:

• Min. NITEC in any Engineering field or equivalent certification

• Willing to do hands-on work and comfortable to be in clean room suit

• Able to work on weekends

*Able to start work within short notice will be highly advantageous.*

**Please be notified that only shortlisted candidates will be notified**

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: TOH SHIQI

EA Personnel No: R23119083

EA License No: 21C0845

The Water Heater and/Ceiling Fan Technician is responsible for installing, repairing, and maintaining ceiling fans and water heaters in residential and commercial settings. This role involves a combination of technical skills, customer service, and attention to detail.

Responsibilities

• Install and repair ceiling fans and/or water heaters.
• Provide excellent customer service
• Explain work details to clients.
• Ensure safety compliance and adherence to regulations.
• Maintain accurate records of installations and repairs.
• Stay updated on product knowledge and industry advancements.
• Manage work schedules and respond to emergency calls efficiently.
• Conduct quality checks on completed installations.

Requirements

• Valid Singapore Class 3 driving license.
• Technical proficiency in electrical work.
• Relevant certifications and licenses.
• Strong troubleshooting and problem-solving skills.
• Excellent customer service and communication skills.
• Physical stamina for lifting and climbing.
• Commitment to safety protocols.
• Attention to detail in installations and repairs.
• Efficient time management and organizational skills.
• Able to attend relevant company-sponsored compliance training whenever necessary

Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Job Scope

• Will be helping out with cleaning of instruments
• Packing of sterilized instruments
• Will be required to carry heavy loads (max of 11-12kg)

Job Requirements

• No experience required as on job training provided
• Need to be comfortable with sight of blood
• GCE N Levels

Interested candidates can write in to Ann at [email protected]

Ann Goh Xin Ting
R1875289

Recruit Express Pte Ltd
E.A License: 99C4599

• Position: Technician (Heavy Equipment)
• Location: Tuas (company transport provided)
• Working hours: Monday to Friday (8.30am - 4.30pm)
• Salary (commensurate with experience): Up to $2,500 + OT Payable + AWS + 14 Days Annual Leave + Transport Allowance + Meal Allowance
• Duration: Permanent
• Industry: Equipment & parts distributor (MNC)

Main Responsibilities:

• In-charge of machine assembly
• Handling electrical panel wiring and machine cable routing
• Perform machine testing
• On-site installation & commissioning
• Servicing & troubleshooting
• Maintain workshop cleanliness after daily job
• Any other ad-hoc duties assigned

Requirements:

• ITE or Diploma in Mechanical/Electrical/Mechatronics Engineering
• Trained and/or experienced in the heavy equipment industry
• Minimum 2 years of relevant experience is required

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Gather business and/or application requirements on the infrastructure, conduct impact analysis, suggest design/re-design to integrate the change into the existing environment

• Test systems in accordance to specifications & service level. Where relevant, perform the necessary system programming & configuration

• Manage systems changes through established change request process & provide status reports to the relevant parties

• Respond promptly to incident, investigate & provide temporary &/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties

• Conduct root cause analysis & implement pro-active measures. Monitor effectiveness of implemented measures

• Monitor & measure the performance & availability of systems proactively;

• implement corrective actions identified to improve performance & availability

• Monitor the agreed service level (.e.g. service request, system availability), document & maintain the configuration of the systems; provide regular reporting to relevant parties

• Execute service continuity measures, e.g. backup/restore procedures & disaster recovery plan dry run to ensure continuous operation of the business

• Ensure the management of ICT systems adhere to established ISO20000 & ISO27001 processes / procedures and ITIL best practices / ITSM and methodologies (e.g. change management, release management, incident management, problem management, configuration management)

• Manage budget, resources and schedule for system implementation / operation activities; ensure deliverables meet client requirements and quality standards

• Established facility management standards/best practices to ensure operation consistency across project/facility management teams

Responsibilities:

• Basic site infrastructure management and monitoring
• NetApp storage file sharing solution admin support
• Local application support: user account, shopfloor domain account synchronization
• Local application support: architecture specification maintenance and update, firewall flow matrix, coordinating with global support in case of incident.
• Cyber security support on local applications / local infrastructure: patching, cyber compliance status

Requirements:

• Strong communication skills
• IT support processes: Incident management, change management,
• Expertise / knowledge about IT infrastructure foundations: Network/Firewall/VM (virtual machine)
• Windows servers / Active Directory
• Knowledge on application architecture

Find Your Dream Job With Us

WE ARE HIRING !! Apply now and make a difference.

Role: System Analyst

Job Requisition Number: JR46220

Job Level: More than 10 years of relevant experience (L4)

Location: Singapore

Key Skills: Shell Script, SQL, Spark, Python, System Diagram

Job Objectives

To support AML (Anti-Money Laundering) Projects/CRs for Singapore and Regional entities

Key Responsibilities

· Participate in end-to-end projects for system implementation of machine learning system

· Engage and collaborate with Architects, Security and Development Lead to ensure solution design complies with enterprise design principles, security and control standards

· Liaise with application teams across group and countries build the enhancements according to the technical solution plan

· Analyse user requirements and convert requirements to design document and other system documentation to capture key design decisions

· Plan technical deliverables, perform design and development works to meet project’s requirements within schedule

· Perform data mapping and process mapping with interfacing applications

· Escalate issues that impacts project schedule on timely basis and propose workarounds/resolutions

· Create technical documents for the solutions. Compile timely, comprehensive, and accurate documentation as requested

· Test, maintain and recommend software improvements to ensure strong functionality and optimization

· Work with production support team members to conduct root cause analysis of issues, review new and existing code and/or perform unit testing

· Partner with Test Management teams to ensure completion of SIT, UAT, performance / load testing and application security testing with quality result

· Liaise with other application teams and business users to prepare test cases and test data prior to testing in UAT and Mock Run environment

· Manage project change request approval windows and deployment schedule

· Facilitate and provide technical and testing support before and after production deployment

· Liaise with other units across IT and Business in the organization

· Manage external vendors for project delivery within schedule

Key Requirements:

Must Have

· More than 10 years assuming techno functional role in either compliance technology or machine learning domain

· At least 8 years of experience / knowledge in Unix Shell Scripting, Oracle, Java and Python, Spark

· At least 8 years of experience in application and database design and

· Ability to multitask effectively and handle large amounts of data

· Highly driven, pro-active and a strong team player

· Excellent interpersonal skills and written and verbal communication skills in English

Good to Have

· Experience in Hadoop ecosystem and technologies

· Experience in NoSQL database or Big Data

· Experience in Git, Jenkins, JIRA

· Experience in SharePoint and Confluence

Please forward your resume in MS word format to [email protected] and

[email protected]

Please refer your friends for any IT openings as we have various positions.

Please do not send PDF Format Resume . Send the following details

1. Notice period

2. Current Salary

3. Expected Salary

4. Visa Status in Singapore

5. Current Location