Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

• 5 Days work week
• 9am to 6pm
• Walking Distance from MRT

Responsibilities:

• Oversee drawing management and control of technical documentation
• Assist project manager in planning and execution of project plans at site
• To understand and design electrical drawing and single line drawings
• Carrying out tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementing preventative maintenance procedures
• Preparing service & Site Progress Reports

Requirements:

• Diploma in Engineering or equivalent
• Min 2 years of working experience in construction industry
• Knowledge in PLC and WSH

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1222284 | Kelvin Soh

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Prepares and reviews key project documentation in executing the complete Subsea/Riser interface engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares and reviews project requirement specification, layout and interface drawings, design studies and other engineering deliverables using engineering common network, software and tools
• Coordinates with other engineering team members (i.e. Yard engineering, basic design and etc.), Equipment designers and Client’s SURF contractors on technical issues and design solutions in meeting project deliverables
• Participates in project meeting, attends to basic technical queries and issues related to subsea/riser interfaces, reviews and be responsible for Riser interface equipment designer deliverables
• Liaises with owners, Equipment designers, SURF contractors, , statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Generates and reviews the reports on work progress for submission to owners, statutory and classification authorities for approval and maintains project database for future references
• Preparation of technical specification (TS) for complex riser related packages.
• Technical bid evaluation (TBE) of vendor proposals to aid selection of most suitable proposal for the project.
• Reviews Vendor deliverables
• Manages & Liaises with the selected vendor to deliver the package meeting all the project requirements in a safe and cost-effective manner meeting the schedule.
• Provides engineering inputs to commercial, production and project team members on all aspects to procurement, fabrication, installation, testing and commissioning activities

Requirements

• Bachelor's Degree in Mechanical/ Offshore and Marine Engineering or equivalent
• 5 years of experience in Procurement, Planning, Designing, Integration of Subsea/Riser interface design in the oil & gas industry
• Experienced in engineering pre-commissioning and commissioning activities in package
• Possesses good interpersonal skills
• Good problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job description

Serve as the primary point of contact for 1st and 2nd line IT support within Northern Marine Group, focusing on the Singapore office. Additionally, support the wider vessel support team by assisting with IT incident management and vessel-related projects. The role includes occasional travel within the Asia Pacific region to provide IT support on vessels and at site offices.

• React quickly and professionally to service desk incidents and requests that are submitted onshore and offshore via the Self Service Portal

• Responding to support requests for hardware such as, but not limited to, PC’s, Laptops, Mobile devices and Printers

• Responding to Service Requests that relate to, but not limited to, access/application/hardware requests, New Joiner/Leaver requests and standard requests that are submitted via the Self Service Portal.

• Provide knowledge base articles to be consumed by the end user – with the objective of reducing calls by empowering colleagues to search knowledge base for guidance/process or procedures prior to engaging the Service Desk.

• Collaborate with other Northern Marine IT teams to facilitate change and introduce new services to the business.

• Collaborate with Infrastructure Services Team for any incidents and changes aligned to network/storage hardware located in Singapore office

• Attend Vessels that have been brought into management/require refresh to facilitate installation/refresh of hardware.

• Identifying CSIP (Continuous Service Improvement Process) items that may improve how the Service Desk functions

• Ensure that the Asset Database is always maintained.

To be considered for this opportunity, candidates are expected to have a good understanding and awareness of the following technologies:

Networking and Hardware support

Desktop & Printer Hardware support

Windows 10 support

Server 2016/2019 Admin

Windows Server 2008/2012/2016 including AD, DNS, DHCP

Virtualization technologies such as Hyper-V and VMware

Wi-Fi Technologies (Unifi)

Active Directory Administration

Office 365 Admin

Remote access experience and remote support

Certifications in the following areas would be a significant advantage:

HNC/HND or equivalent experience in IT related subject

Job summary

Strong understanding of IT systems, including both hardware and software components. Proficiency in troubleshooting and resolving technical issues. and must be able to travel and board vessels as required for on-site support and maintenance.

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

We are seeking a talented and experienced Cyber Systems Engineer to join our team. You will be responsible for the design, implementation, and maintenance of secure systems and networks. This role involves ensuring the integrity, confidentiality, and availability of our information systems, as well as collaborating with cross-functional teams to deliver the projects.

Be Part of Our Success

System Design and Implementation:

• Design, deploy, and manage IT infrastructure, including servers, storage, and networks.
• Implement system security measures, including firewalls, antivirus, and access controls.
• Install, configure, and maintain operating systems and application software.

Partner Collaboration and Project Delivery:

• Collaborate with external partners to integrate their solutions with our systems.
• Manage relationships with vendors and service providers to ensure the delivery of high-quality IT/Cyber services.
• Lead and participate in project planning, execution, and delivery to clients, ensuring all requirements and timelines are met.
• Communicate project status, risks, and issues to stakeholders and clients.
• Design and maintain network infrastructure, including LAN, WAN, and VPN.
• Ensure network security through appropriate configurations and monitoring.
• Manage network devices such as routers, switches, and firewalls.

Backup and Recovery:

• Develop and implement backup and recovery strategies.
• Ensure data integrity and availability through regular backups.
• Perform system restores as needed.

Collaboration and Support:

• Work with cross-functional teams to understand and support their IT requirements.
• Provide technical support and training to end-users.
• Document system configurations, procedures, and changes.

Research and Development:

• Stay up to date with the latest technology trends and advancements.
• Evaluate and recommend new hardware and software solutions to improve system efficiency and performance.

Qualities We Value

• Knowledge in Computer Science, Information Technology, Cybersecurity, or a related field.
• Proficiency with operating systems (e.g., Windows, Linux) and server management.
• Proficiency with cybersecurity tools and technologies (e.g., firewalls, IDS/IPS, SIEM, antivirus software).
• Strong understanding of networking protocols and infrastructure.
• Relevant certifications (e.g., CISSP, CEH, CISM, CompTIA Security+) are highly desirable.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills.
• Singaporean only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working Location: Jurong East

As a Senior Backend Engineer specializing, you will be responsible for designing, developing, and maintaining backend systems that support the integration and optimization of AI models & LLM in trading applications. You will work closely with the AI engineering team to integrate various machine learning models and algorithms into the backend systems to address business needs, ensuring high availability and low latency.

Key Responsibilities:

• Design, develop, and maintain backend systems and services that support AI models, ensuring high availability and low latency
• Integrate machine learning models and algorithms into backend systems for recommendation systems, predictive analytics, and other business applications
• Collaborate with frontend engineer, AI engineer and other stakeholders to identify business problems and design backend solutions
• Develop efficient APIs, ensuring high standards of performance, reliability, and security
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Document system design and API specifications to foster collaboration and transparency

Qualification & Skills:

• 4+ years of professional experience as Backend Engineer
• Proficiency in Python/ Typescript
• Strong understanding of database systems, including both SQL and NoSQL, and web development frameworks
• Solid experience in complex system design or architecture building.
• Familiarity with API design principles and best practices.
• Familiarity with caching mechanisms and cache invalidation strategies.
• Experience with cloud infrastructure, preferably AWS or GCP.
• Strong problem-solving, communication, and interpersonal skills.
• Passionate about AI/ML, with a keen interest in LLM technology.

We offer a competitive salary that is commensurate with the experience of the successful candidate

We are now seeking Field Service Engineer to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Perform inspection, installation, commissioning, repair, upgrading, troubleshooting and related service work on offshore drilling platforms, land rigs, Shipyard or in workshops.
• Liaise with rig’s management during offshore assignment.
• Communicate with respective Managers for briefing and debriefing of service-related activities.
• Fill in necessary job reports, ISO work instructions and checklists required for all work in a timely manner.
• Interface with relevant departments to obtain a thorough understanding of NOV products and how they are safely operated, tested, calibrated and problems are resolved in a timely manner.
• Communicate field failures and feedback reports to the appropriate departments.
• Install, commission, troubleshoot, and repair NOV drilling equipment
• Provide training to other NOV personnel on the following systems and equipment as needed.
• > Analog and digital PLC based systems
• > Proprietary integrated control systems (Cyberbase, Amphion)
• > Variable Frequency Drives
• > Hydraulic/Pneumatic Systems
• > Electrical Systems (including various types of AC/DC motors)

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.
• Travelling on short notice is required. approximately 50% travelling.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand electrical schematics and PLC programs. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Job Description

• Identify and evaluate problems / root cause of process inefficiency.
• Identify and source for the potential improvement method to improve process efficiency (Safety, Quality, Cost, Delivery and Environmental).
• Lead Project Team (Engineers and Technicians) on process improvement and development activities assigned.
• Develop process digitization concepts and drive big-data analytics for process knowledge improvement.
• Work closely with relevant departments for process improvement and breakthrough projects.
• Present and manage project progress, cost and completion deadline according to schedule.
• Any ad-hoc duties as assigned.

Job Requirements

• Degree in Metallurgy, Materials Science / Engineering, or equivalent with more than 3 years of relevant experience (Experience in Steel / Aluminum metallurgy and Heat Treatment is preferred).
• Diploma in the above-mentioned fields with more than 6 years of relevant experience.
• Knowledge of manufacturing processes and IIOT solution deployment is preferred.
• Preferably Sound knowledge in Process Improvement Methodology.
• Willing to travel; Willing to station 3-12 months in other countries subjected to project requirements.

Permanent, Full Time

We are seeking candidates with:

· A diploma/degree in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.

· At least 2 years of experience in Engine Repair & Maintenance.

· Fresh graduates are welcome, and the company will provide training.

Roles & Responsibilities

· Perform the repair, maintenance, or overhaul of marine diesel engines 2 & 4 stroke under the supervision of Engineer / Technicians.

· Comply with all the requirements to carry out the jobs in the shipyards or anchorages.

· Lifting and shifting heavy components of engine back to the workshop for repair/reconditioning and vice-versa.

· Ensure prompt response and smooth communication with the customers

· Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

· Relevant marine / mechanical / engineering qualification

· Hands-on experience in trouble-shooting, maintenance and repair is an added advantage

· Candidates with no experience may apply as apprentices as training will be provided

· Willing to work in a shipyard/anchorage environment

· Able to work overtime as and when needed

An attractive remuneration package and career growth opportunities await the successful candidates. Interested applicants are invited to email with detailed resumes indicating their current and expected salary.

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct cutting-edge research in large language models, translating theoretical algorithms, frameworks, and methodologies into practical, working prototypes that demonstrate potential product applications.
• Collaborate closely with researchers and engineers to design and implement system architectures and software solutions that transition research findings into scalable, deployable products.
• Develop and build tools and frameworks to facilitate the transfer of LLM capabilities to industry partners, showcasing the practical value and impact of the research outcomes.
• Create and maintain comprehensive technical documentation, including white papers, presentations, and tutorials, to disseminate knowledge to a broader audience and enhance overall expertise in these emerging areas.
• Engage with international research communities and partners to stay abreast of the latest advancements in machine unlearning, contributing to discussions, collaborations, and initiatives that elevate Singapore’s position in the global AI and privacy research landscape.

Job Requirements:

• Minimum Masters’s degree in computer science/ engineering or related fields.
• Proficiency in Python is a must. Experience with other programming languages such as Java, C/C++, or Go, and frameworks like PyTorch or TensorFlow, is highly advantageous.
• Experience in developing and deploying machine learning models, particularly in natural language processing (NLP) and large language models (LLMs), including tasks such as data preprocessing, feature extraction, model training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques, including knowledge graphs, machine unlearning, and AI testing.
• Proficiency in working with common Linux distributions (e.g., Ubuntu, CentOS) and familiarity with shell scripting and command-line tools.
• Experience with cloud platforms (AWS, GCP, Azure) and containerization technologies (Docker, Kubernetes) is a must.
• Experience with version control systems (e.g., Git) and collaborative development tools.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Experience in AI model testing methodologies, including robustness, fairness, and explainability assessments, as well as understanding data privacy and security considerations in AI.
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

Do you want to be part of the team that revolutionizes the resource exploration and navigation industry? Atomionics is working on quantum sensors based on cold atom interferometry where atoms are cooled down to almost absolute zero using lasers. At such cold temperatures, these atoms start behaving like waves, which allows us to precisely measure the forces acting on them.

This opens up a wide range of applications including, but not limited to, paving a path in the energy transition to zero-carbon, exponentially improving the performance of inertial navigation systems, and transforming the global positioning system. At Atomionics, you will get the chance to prototype, test, refine, finalize, and produce your designs toward making our devices compact and robust for field deployment with the only constraints being power and your imagination.

We are looking for an electronics engineer who:

1. Wants the freedom to innovate by being involved in deep tech research
2. Is excited by the prospect of working within an interdisciplinary team comprised of mechanical engineers, physicists, and software engineers
3. Would like to own their work via compelling equity offerings

We are a small, focused group in a high-energy environment. Our team consists of people at the top of their domains with a diverse set of experience, such as in advanced rocket engines, the first digital cameras, and high-resolution microscopes, apart from cold atom physics. In addition, we are backed by some fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

Responsibilities

• Lead project development from hardware specifications, manufacturing methods and procedures, and manufacturing quality
• Design architecture to manage size, weight, and power of cold atom sensors to target specifications
• Propose new innovative solutions and technology

Must have skills

• Analog and digital design
• Microcontroller/microprocessor and FPGA based design, interface SPI, I2C, RS232, Parallel, USB, CAN, and SATA
• Schematic capture and PCB design layout
• Prototyping and debugging of boards
• Strong interest in and passion for technology

Nice to have skills

• Knowledgeable in RF test methodologies of RF modules and the use of RF test equipment
• Knowledgeable in solid-state and fiber-based lasers
• Knowledgeable in high power switching power supply and battery management
• Leads and owns projects
• Expertise in emerging technologies

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Your Job

As a Test Engineer, your primary purpose is to drive quality, yield, and productivity improvements. You will manage the new product release to manufacturing and address any problems affecting the smooth operation of parts. You are responsible for all testing activities related to the transfer of new testers from the design center to the manufacturing plant, including working with the design team to qualify new test systems and propose test limits. Your role also involves sourcing and assembling tester components locally, setting up, and debugging test software and hardware.

Our Team

You will be part of the Data-Com and Specialty Solutions Division, reporting to a Senior Engineer, Principal Engineer, or Department Manager. In this role, you'll collaborate closely with a variety of contacts, including assembly subcontractors, vendors, suppliers, QA Engineers, and Product Design Engineers. This teamwork ensures the seamless integration of innovative solutions and product designs in production processes.

What You Will Do

• Responsible for all testing activities related to new tester transfer from design center to manufacturing plant. Work with design team qualifying new test system, proposing test limit.
• Sourcing, assembling all tester components locally, set up and debugging test software and hardware.
• Tester maintenance for on-line/off-line High-Performance testers, Cirris, BERT, OCR, Robert, etc.
• Perform electrical testing, high speed tester support used in the manufacturing of High-Speed cable assemblies based on standards such as Ethernet, Infiniband, Fibre Channel, PCIe, SAS, SATA, etc.
• Integration of custom designed circuit boards and mechanical fixtures with off-the-shelf test equipment such as digital sampling oscilloscopes, TDR modules and network analyzers.
• Integrate software upgrades into high-speed test systems. Work closely with design centers on software improvement feedback to improvise the system for better solutions.
• Perform electrical testing of High-Speed cable assemblies, analyze test data using statistical modeling tools, identify critical to quality aspects of product design and manufacturing process, perform root cause / corrective action analysis, and provide reports to summarize findings.
• Work closely with multifunctional teams to upgrade globally deployable automated production test systems for cable assembly products. Maintain records for project execution, schedule, and budget. System design includes activities such as mechanical fixture design, PCB design, hardware integration, software development, system documentation, performance testing and characterization, etc.
• Create and execute test plans, conduct software reviews, perform system verification and validation, analyze, and resolve failure modes and document the results.
• Create product and test system documentation, specification, and work instructions
• Introduction of new solutions / technologies in the design of production processes.
• Adherence to procedures related to system management of quality, health, safety and environmental.
• Perform work in accordance with the standards of personal and professional integrity as described in the Code of Ethics and Business Conduct. To comply to PBM Guiding Principles for the job carry out under his responsibility.
• Perform other related duties as assigned by Management.

Who You Are (Basic Qualifications)

• Possess a degree or diploma in Mechanical, Manufacturing, Production Engineering, Systems, or Computer fields.
• Minimum of 2 years of experience with test equipment and measuring instruments.
• Proficient in compiled programming languages such as C/C++ or VB/C# within the Microsoft .NET framework.
• Skilled in using scripted programming languages like Python.
• Strong analytical ability to apply logical reasoning, test assumptions, observe results, and make corrections.

What Will Put You Ahead

• 2-5 years of progressive engineering experience with a robust understanding of high-speed testing and design.
• Extensive experience with RF/microwave test and measurement equipment such as digital sampling oscilloscopes, TDR modules, and network analyzers.
• Knowledge of RF/microwave transmission line theory, including s-parameters, Fourier transforms, and characteristic impedance.
• Experience with relational databases using software like Microsoft SQL or MySQL.
• Exposure to RF/microwave circuit design and PCB layout with tools like Mentor Graphics PADS or Cadence Allegro, and familiarity with advanced PCB fabrication methods.
• Training in Lean/Six Sigma methodologies with an understanding and application of tools such as control charts, process capability, and gage R&R.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Responsibilities

• Lead the execution of the Instrument & Control ITP inspection and test in compliance with rules and Tai Power requirement.
• Ensuring that the deliverables from engineering, fabrication, and principal contractors are of the right quality, according to company and industry requirements
• Supporting engineering design review and provide feedback from basic design, details design up to shop drawings such as SCADA, CCTV, Helideck weather monitoring, ESD, telecommunication, F&G
• Interpreting, implementing, and documenting the overall control philosophy across the wind farm components
• Preparing Instrument & Control equipment technical spec and RFQ for supporting procurement team during quotation sourcing
• Participate in preparation and review of Inspection and Test Plan (ITP) of the wind farm offshore substations (OSS) and commissioning procedure.
• Involving in EC/MC completion test package preparation to ensure construction completion handed over as per sequence and schedule
• Perform a daily supervision of the installation and commissioning
• Attending daily call out inspection and work closely with shipyard construction team, QA and commissioning team
• Involving in wind farm OSS final acceptance test / Proof Concept test procedure preparation.
• Participate in Factory Acceptance Tests (FAT) for wind farm OSS equipment
• Involving in O&M procedure preparation and conducting OSS maintenance execution during operation.
• In association with the Maintenance Systems group, review and update the technical content of the preventive maintenance procedures and to recommend changes where improvements in safety, quality or economy may be effected
• Contributing to the continuous development of new technologies to improve the performance and usability of our wind farm control systems

Requirements

• Bachelor Degree in Electronics/Instrumentation/Communication Engineering
• Knowledge in SCADA, PLA or DCS control system
• Problem solver, attention to details,
• Ability to analyze information and data objectively and logically
• Ability to apply creative thinking and problem-solving skills to complex challenges
• Ability to evaluate the reliability and validity of sources and evidence
• Ability to communicate effectively and persuasively with diverse audiences
• Ability to identify and anticipate potential risks and opportunities
• Possess excellent communication and interpersonal skills

We are seeking an exceptionally skilled and detail-oriented NDT

Systems Engineer to join our team. This role demands extensive

expertise in advanced NDT methods, system design, programmin

and hands-on testing. The ideal candidate will have a proven trac

record in operating and programming advanced NDT equipment,

including PAUT, ToFD, DRT, ECT, and ACFM, and will possess

advanced skills in software and mechanical design.

1. Advanced NDT Equipment Handling:

Phased Array Ultrasonic Testing (PAUT): Operate PAU

systems, including setting up and calibrating equipment

configuring probe arrays, and conducting complex

inspections on various materials.

Direct Radiography Testing (DRT): Execute DRT

procedures, including optimizing exposure parameters,

interpreting radiographic images, and ensuring complia

with safety and quality standards.

Eddy Current Testing (ECT): Perform ECT for detecting

surface and near-surface flaws, including setting up test

parameters and analyzing signals.

Alternating Current Field Measurement (ACFM): Utili

ACFM to detect and size surface-breaking defects, includ

setting up equipment and interpreting measurement da

2. System Design and Programming:

Automatic Immersion Systems: Design, program, and

implement automated immersion systems for ultrasoni

testing. This includes developing custom software soluti

and integrating with hardware components.

Software Simulation: Use CIVA software to simulate an

model NDT scenarios, optimizing test setups and predic

inspection outcomes.

Equipment Programming: Develop and troubleshoot

custom programming for ultrasonic testing equipment,

including creating scripts for specific test procedures an

automating test sequences.

3.Technical Skills:

CIVA Software:

Advanced knowledge of CIVA software fNDT simulation and modeling.

SolidWorks and AutoCAD:

Proficient in SolidWorks formechanical design and AutoCAD for technical drawing.

Programming Skills:

Experienced in programmingultrasonic testing equipment, including creating customscripts and automation solutions.

4.Personal Qualities:

Initiative and Hardworking:

Self-driven with a strong wethic, capable of working independently and managing pressures.

Analytical Skills:

Excellent analytical and problem-solviabilities, with a keen eye for detail and precision.

5.Consulting and Solutions:

Offer expert consulting services to addresscomplex NDT challenges, providing tailored solutions baon client requirements and industry standards.

Problem Solving:

Analyze and resolve technical issuesrelated to NDT processes, equipment, and systemintegration.

6.Travel Requirements:

Regional Travel:

Travel to various international locationincluding the Middle East (Saudi Arabia, UAE, Oman, Qaand Asia (Singapore, Malaysia, Indonesia, Thailand,Bangladesh, India) for project assignments.

Adaptability:

Adapt to diverse working environments,including offshore and onshore sites, and handle projecdemands with flexibility.

Application Instructions:

Interested candidates should submit a detailed resume outlitheir qualifications, experience, and relevant certifications.

Please include a cover letter addressing how your skills andexperiences align with the responsibilities and requirementsoutlined above.

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

Description

• Lead, guide and train technicians
• Troubleshoot and diagnose faulty equipment reported by customers
• Check parts needed and ascertain costs of parts
• Repair Samsung CE produt at customer's place
• Update repair status in the system and follow up the case until job finish
• Answer customers' queries about repair details and parts change
• Escalate case to principal if necessary
• Visit customers to repair equipment on-site
• Any other ad-hoc duties as assigned

Requirement

• Independent and ability to work as a team
• Willing to learn
• Positive attitude
• Minimum GCE 'O' Level
• Able to converse/explain in English
• Able to carry/bring down heavy home applicance/s
• Prefer to have electronic product repair experience
• Preferably with washer/fridge repair experience
• Singapore class 3 driving license is a MUST

Training will be provided.

Working hours: Monday - Friday from 9am to 6pm / Saturday from 9am to 1pm (but must suport full day)