Primary Objectives of Position

• Lead a team of senior / technicians to carry out scheduled Preventive Maintenance and Corrective Maintenance together on passenger trains/engineering vehicles/light rail vehicles/component/equipment as assigned by supervisor.
• Ensure the team comply with all PM & CM works and related tasks with approved work instructions, quality procedures, safety and operational procedures, and good maintenance standards.
• Plan and coordinate within the team and other teams to complete the assigned maintenance tasks within the established standard time.
• Ensure the team has the necessary qualifications and authorization to carry out daily tasks and any assigned tasks by supervisor.
• Responsible for the safety, welfare and discipline of the team.
• Responsible for the upkeep of the team equipment/tools and working environment

Major Responsibilities

• Responsible for team's quality and standards of the PM/CM works within the established standard time and be competent to carry out preventive and corrective maintenance tasks within the established standard time in accordance to work instructions and related documents, as assigned by supervisors.
• Exercise safety always, in accordance to established safety procedures.
• Responsible for the safety of self and all co-workers, inclusive of contractors.
• Demonstrate sufficient ability in diagnostic and troubleshooting electromechanical systems.
• Forecast and plan his team and resources to complete maintenance tasks and assigned tasks timely.
• Perform supporting maintenance activities such as Train Driver/Shunter, overhead crane operator, forklift driver, etc. as authorized and required by the supervisor.
• Able to work on a shift roster system in accordance with the MOM guidelines and the Collective Agreement.
• Undertake any other tasks or functions that are incidental or ancillary to the performance of the works assigned by supervisor.

*The above activities are no means exhaustive and are subjected to amendment whenever is needed.

Specific Safety Responsibilities

• Undertake daily safety checks on trains and only signs trains off as fit for service after they have been properly checked.
• Carry out repairs on trains in a safe way according to training received and only signs the work off as complete after thorough checks have been carried out.
• Undertake work in accordance with Company Rules and Procedures.
• Remains constantly vigilant for unexpected defects on trains and report them immediately to his Supervisor.

Job Specifications

• Higher Nitec (with Experience) or Diploma in Engineering (Electrical/Electronic/Mechanical/Mechatronic Engineering).
• Minimum 2 years relevant working experience in maintenance/repair/installation of electrical or mechanical equipment.
• Fresh graduate with good academic results will also be considered.
• Experience in railway environment will be an added advantage.
• Must have analytical & fault-finding skills.
• Understand at least two of electrical/electronic/air conditioning/pneumatic/mechanical system.

Attributes

• Good working attitude with strong commitment to job assignments.
• Able to communicate well with staff at all levels.
• Have good initiatives and strong trouble shooting skills.
• Demonstrates strong leadership qualities and is capable of motivating teammates
• Required to work on 3 rotating shift and required to be on 24 hours standby round the clock for any unforeseen emergency recall.

We regret to inform that only shortlisted applicants will be notified.

Remuneration: $3,500 - $4,000

Working Hours: Mon - Fri, 7:30am - 5pm

Key Responsibilities:

• Minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiate, implement, and manage the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes adhere to all Regulatory and Statutory Requirement.
• Establish and prepare process documentation
• Make recommendations for improving plant operations and solving production-related problems.
• Train respective subordinates
• Conduct employee performance reviews based on job descriptions
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.

Job Description:

• Minimum 2 years working experience in manufacturing environment.
• Nitec / Higher Nitec / Diploma in M&E or Mechanical Engineering
• Able to supervise and lead the subordinates.
• Willing to work after working hour or during non-working days.
• Knowledge in ISO would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team

Job Requirements:

• Higher NITEC in Mechanical Engineering.
• Advanced skills using company software
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NiTEC or Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• At least a minimum of 5 years of relevant experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Experience : 6 + Years

12 months Contract

Willing to work in 24/7 shifts ( Morning , Afternoon & Night )

Position Overview:
We are seeking a highly skilled Site Reliability Engineer (SRE) to provide Level 2 technical support

. The ideal candidate will handle critical tasks such as transaction investigations, scheme rejections, dashboard creation, application monitoring, and incident resolution, while ensuring seamless operations in a 24/7 environment.

Key Responsibilities:

1. Technical Support:
   • Provide Level 2 technical support for the application.
   • Investigate transaction inquiries and ensure timely resolution.
2. Monitoring and Analysis:
   • Create dashboards in Kibana for real-time monitoring of critical applications.
   • Fetch and analyze application logs from Kibana and Linux servers to investigate issues.
3. Data Management and Reporting:
   • Write and execute SQL queries to extract data for business requirements.
   • Generate financial reports in Oracle to meet audit and compliance needs.
4. Incident and Change Management:
   • Provide 24/7 support to resolve P1 incidents within SLAs.
   • Create and implement change requests for bug fixes, OS/server patching, and application restarts.
   • Support all infrastructure-level activities for the applications.
5. Disaster Recovery (DR) Support:
   • Deliver 24/7 DR support for the business.
6. Documentation and Process Improvement:
   • Prepare knowledge transfer (KT) documents for new processes and technical troubleshooting.
   • Investigate deviations from standard processes and escalate as per the escalation matrix.

Skills and Experience:

• Strong expertise in transaction processing platforms.
• Proficiency in SQL and experience in generating reports in Oracle.
• Hands-on experience with Kibana for dashboard creation and log analysis.
• Solid understanding of Linux servers and command-line tools.
• Experience with change management processes, including OS/server patching and application maintenance.
• Proven ability to handle P1 incidents under tight SLAs in a 24/7 support environment.

Qualifications:

• Experience in supporting merchant acquiring or payment gateway applications in a Bank
• Experience of financial transaction workflows, clearing, and settlement processes.
• Familiarity with ITIL processes for incident and change management.

Work Conditions:

• 24/7 support , willing to work in rotational shifts
• Willingness to support disaster recovery operations and participate in weekend or after-hours maintenance activities.

Job Summary:
We are seeking an experienced Software Testing Engineer to join our dynamic team focused on developing cutting-edge medical device software. The successful candidate will be responsible for designing, executing, and maintaining comprehensive testing processes to ensure our software meets the highest standards of quality, safety, and regulatory compliance. This role requires a deep understanding of software testing and compliance.

Key Responsibilities:

• Design, develop, and execute test plans, test cases, and test scripts for software applications intended for use as medical devices.
• Collaborate with software developers and cross-functional teams to identify, document, and resolve software defects.
• Conduct various types of testing, including functional, integration, system, performance, and regression testing, to ensure software quality.
• Prepare and maintain comprehensive testing documentation, including test protocols, validation reports, and traceability matrices, required for regulatory submissions and audits.
• Work closely with quality assurance and regulatory teams to ensure software testing aligns with industry best practices and regulatory requirements.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software testing, preferably in the medical device industry.
• Knowledge of software testing tools and frameworks (e.g., Selenium, JUnit, or similar).
• Strong analytical skills with excellent attention to detail.
• Effective communication and teamwork abilities.
• Experience with regulatory compliance and documentation for medical devices will be an advantage but not mandatory.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

We are seeking a highly skilled and motivated medical device Product Development Engineer to join our dynamic team. The successful candidate will be responsible for the design, development, and maintenance of software products that meet regulatory requirements for medical devices. This role requires a good understanding of both software engineering and medical device regulations, ensuring our products are safe, effective, and compliant.

Key Responsibilities:

• Collaborate with software development team to design, develop, and maintain software applications intended for use as medical devices.
• Collaborate with cross-functional teams, including clinical, regulatory, quality, and marketing to implement product requirements and specifications.
• Ensure software design complies with relevant medical device regulations and standards (e.g., IEC 62304, ISO 13485, HSA guidelines).
• Work closely with regulatory affairs to ensure software products meet all necessary regulatory requirements and obtain required certifications and approvals.
• Prepare and maintain documentation required for regulatory submissions and audits.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software development, preferably in the medical device industry.
• Experience with regulatory compliance for medical devices.
• Familiarity with software validation and verification processes.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Electrical / Mechanical Engineering.
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Mechanical Engineering
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Assist project teams on the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practises.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree or Diploma in relevant discipline.
• Minimum 3 years of experience in construction/ civil engineering industry.
• Able to read and understand CAD, Revit/Navisworks software services in 3D model is essential.
• Have experiences in working in large scale projects.

Job Description:

· Responsible in the design and development of highly complex and scalable Python modules.

· Take ownership of end-to-end technical delivery against project timelines and requirements.

· Participate in requirement analysis while recommending alternative solutions.

· Integrate applications using middle ware software’s such as Avro kafka and database design.

· Deploy applications to open shift via CICD pipeline.

· Working with application support, developers, and product owners to ensure successful releases.

· Flexibility to work extra hours to meet corporate and departmental goals.

· Must have the ability to prioritize and manage multiple concurrent tasks in a fast-paced environment while working

under pressure.

Job Requirements:

· Degree in Computing / Computer Science / Engineering preferred.

· 3 to 8 experience preferably in the financial / fintech industry.

· Experience in supporting trading desk

· Experience in Agile/Scrum methodology.

· Excellent troubleshooting and debugging abilities for 2 tier and multi-tier applications.

· Should have worked as first line application support for trading systems and back office with experience in

analysing of issues raised by end users and general system checks and maintenance tasks.

· Strong analytical & problem-solving skills.

· Experience in documenting the design and development work in confluence.

· Expertise in Python (OOPs Concepts, flask/Django frame works, multi-trading, web sockets, and analytics tools such

as pandas, NumPy etc).

· Highly Experienced in Database designing of SQL and PL-SQL with expertise in at least one RDBMS, preferably Maria

DB and MS- SQL.

· Highly Experienced in writing batch scripts using shell scripting.

· Experience in Linux, OpenShift, Avro based kafka, Dockers, Nginx, Sentinel Redis, AngularJS basics, Rest API’s (Flask),

JSON and web sockets amongst others.

· Experience in CI-CD (Continuous Integration Continuous Delivery) pipeline with experience in Bitbucket.

The Job

• Develop timing/power/noise characterization flow for advanced node memory compiler.
• Strong focus on design automation for SRAM compiler, big data analysis and design verification.
• Develop memory analysis flow for PPA check.
• Design and develop the layout for integrated circuits according to electronics engineering principles, using software to create design schematics and diagrams.

The Talent

• Bachelor's Degree (with min. 8 years of relevant industry experience) /Masters Degree (with min. 6 years of relevant industry experience)/ PhD in Electrical and Electronic Engineering/Computer Engineering/Computer Science.
• Knowledge of SRAM/ROM memory functionality and high speed, low power memory design architecture.
• Experience in spice simulation and understand CMOS layout view, Verilog coding is preferable.
• Proficient in script programming with Perl or Python3.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Job Description:
We are looking for a skilled and innovative AI System Hardware Engineer to join our team. In this role, you will take ownership of the full hardware R&D process, drive innovation, and ensure high-quality deliverables. If you’re passionate about cutting-edge hardware design and enjoy tackling complex challenges, we’d love to hear from you.

Key Responsibilities:

Lead the entire hardware R&D process, including:

• ASIC bring-up
• Developing hardware design schemes
• Selecting components
• Designing schematics and inspecting PCBs
• Conducting testing, debugging, and ensuring successful mass production
• Design innovative hardware solutions that enhance product functionality, performance, cost efficiency, and quality.

Qualifications:

• Education:Bachelor’s degree or higher in Computer Science, Electronics Engineering, or a related field.
• Technical Skills:Strong understanding of high-speed signal integrity and power distribution techniques.
  Familiarity with modern processors, including GPUs, FPGAs, and X86 architecture.
• Experience:Proven experience with ASIC bring-up and hardware validation.
  Proficient in using testing tools such as power sources, loads, and oscilloscopes.
• Tools:Expertise in hardware design software such as Cadence, Allegro, or similar tools.
  

About Us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

As an Infrastructure Support Engineer, you will be responsible for ensuring the smooth operation and support of our IT infrastructure. You will focus on end-user computing, account management, and asset management within our organization. The ideal candidate will have a strong understanding of Microsoft 365 and possess excellent problem-solving and communication skills.

Responsibilities

Microsoft 365 Administration:

• Administer and support Microsoft 365 services, including Exchange Online, SharePoint Online, Teams, and OneDrive.
• Configure, manage, and troubleshoot user accounts, licenses, and permissions within Microsoft 365.
• Assist with deployment and migration projects involving Microsoft 365.

End User Computing Support:

• Provide technical support for end-user devices, including desktops, laptops, and mobile devices.
• Troubleshoot and resolve hardware and software issues related to Windows OS and Office applications.
• Ensure users have the necessary tools and resources for effective productivity

Account Management:

• Manage user accounts within Active Directory and Microsoft 365, including onboarding and offboarding processes.
• Implement security best practices for user accounts, including role-based access controls and password management.

Asset Management:

• Maintain an accurate inventory of IT assets, including hardware, software, and licenses.
• Assist in procurement and deployment of IT assets according to company policies and budget constraints.
• Perform regular audits of IT asset utilization and compliance.

Documentation and Reporting:

• Create and maintain technical documentation for processes, configurations, and troubleshooting procedures.
• Provide regular reports on system performance, asset status, and support activities.

Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or a related field (or equivalent experience).
• Proven experience in IT support, particularly in infrastructure support and end-user computing.
• Strong knowledge of Microsoft 365 services and administration.
• Familiarity with Active Directory and user account management.
• Proficient in hardware and software troubleshooting for various operating systems.
• Experience with asset management tools and methodologies.
• Excellent communication and interpersonal skills.
• Strong problem-solving abilities and a proactive attitude.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Engineer (PLC) to make an impact!

The Role:

As a Services Engineer, you will work within the Services operations team in Singapore and you will be responsible to support any job assign to you to ensure customer satisfaction with Schneider products and its services.

What will you do?

• Perform field service (customer site service) activities involving the installation supervision, commissioning, maintaining, modification, onsite training, system upgrade and repair of Schneider PLC.
• Responsible for a region or subgroup of field services.
• Performs installation supervision and commissioning of Schneider products including day to day service of the same.
• Performs maintenance for Schneider PLC.
• Trains customers on equipment operation and maintenance of Schneider PLC Product.
• Represents Schneider dealing with customer concerns.
• Responsible for identifying and reporting failure modes encountered when in the field. Also responsible for determining the cause of these failures.
• Solve Site problems at customers site and provides reports on these issues.
• Providing 24hrs telephone support for customers.
• Acquisition of Customer Service products.
• Support internal for spare parts warranty, preparation and assembly.
• Improve on site report and process.

What qualifications will make you successful?

• Min Diploma / Degree in Electrical & Electronics Engineering
• Min 3-5 yrs exp. in Oil & Gas sector, Power Generation, Petrochemical technical experience is an added advantage.
• Has experience and skilled in PLC. Technical knowledge of MV and LV equipment will be an added advantage.
• Willing to travel up to 80% within Region.
• Has teamwork and is customer oriented.
• Has good time management and able to work under pressure.
• Excellent verbal and written communication skills in English are essential.
• Ability to interface with all functional areas of the company.
• Skilled in Microsoft Office – Excel, Word and Power Point.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership
• …and more!

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

ROLE DESCRIPTION SUMMARY

In anticipation of future bids and projects in Defence and Public Security sectors, Engineering Department requires system engineers who has a track record of building, deploying and maintaining the IT infrastructure in an enterprise environment. Domain knowledge in enterprise data networks and/or cybersecurity is desirable.

The System Engineer is to assist with IT infrastructure solutions according to project requirements and drive transformation for internal/external customers by adopting established platforms. The candidate will be involved with the requirements gathering, preparation of proposals, and conduct of presentations to customers or system owners. Upon confirmation of projects, the candidate is expected to take on an active role in the definition, procurement, deployment and operations of the necessary IT infrastructure covering but not limited to server hardware, virtualisation middleware, operating system and backup solution etc. Where necessary, the candidate may be tasked to support data networking initiatives, cybersecurity implementations and other COTS deployment depending on the candidate’s technical background and interests. Therefore, a good understanding of cybersecurity principles and concepts such as network segmentation, network access controls and 802.1X is desirable.

KEY ACTIVITIES AND RESPONSIBILITIES

As an IT Infrastructure System Engineer, you are accountable for:

· Assist project or team leads in evaluating and recommending the appropriate IT infrastructure products (commercial or open source) that will meet project or customer requirements

· Take charge or support the deployment of said products, including integration and testing activities at the System-as-a-whole level

· Work with engineers from other disciplines (e.g. software, cybersecurity, integration) in the delivery of turn-key systems or proof-of-concept (POC) initiatives

· Monitor the health of infrastructure services and perform availability management for servers and its services, and assist in the resolution of operational issues

· Create & maintain technical documentation on Operations / Audit Best Practices, troubleshooting & related solutions knowledge base

· Manage the system recovery process (backup/restore of Infrastructure services and critical production server data and image) and assist in preparing incident reports in the event of outages

· Participate in failover or disaster recovery exercises of the IT infrastructure when required

· Deploy security fixes on Infrastructure services in accordance to enterprise vulnerability and patching strategy

· Administer servers, VMware/Hyper-V platforms and domain controllers/LDAP servers.

· Participate in the optimization of system performance and system capacity planning.

· Support deployment/configuration tasks of Cisco switches and network firewalls (Check Point / Fortinet / Palo Alto)

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Degree in Computer Science, Information Technology or related disciplines

· At least five years of relevant IT experience in designing (not mandatory but preferred), deploying and managing IT infrastructure systems.

· Required knowledge and experience with Windows Server 2k16/2k19, Linux, VMware/Hyper-V virtualization, and Azure Cloud

· Knowledge of infrastructure best practices, system technologies, operation processes and system engineering methodologies

· Working knowledge of cybersecurity technologies will be desirable

· Technical certification in cybersecurity, network or system technologies, such as CCNP, Microsoft Certified: Azure Administrator Associate, VCP (VMware), VMCE (Veeam), OSCP, SSCP etc. will be advantageous.

· Good written and oral communication skills

· Motivated team player with a keen eye for details, but able to work independently as well when required

· Candidate should also be willing to explore new technical domains in order to have a holistic technical view of the digital transformation landscape

Job Description:
We are seeking a skilled and motivated System Performance Engineer to join our team. In this role, you will develop and optimize operator libraries for large model inference, training, and fine-tuning processes. You will map operator library implementations to hardware, conduct performance analysis, and identify bottlenecks to maximize system efficiency and performance.

Key Responsibilities:

• Operator Library Development: Develop and optimize libraries for large model inference, training, and fine-tuning, ensuring efficient operation on hardware platforms.
• Performance Analysis: Analyze operator library implementations to identify and resolve performance bottlenecks, optimizing for memory usage, processing time, and data accuracy.
• Optimization Implementation: Engage in the software design and optimization of operator libraries, including instruction-level parallelism, to maximize hardware performance.
• Mapping to Hardware: Map operator library implementation to the underlying hardware, ensuring seamless execution and improved performance.
• Testing and Validation: Perform detailed testing, including memory usage and processing time analysis, to validate optimized library performance.

Qualifications:

• Educational Background: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Strong understanding of large model algorithms and the principles behind their design.
  • Proficiency in computer architecture and many-core processor principles.
  • Practical experience in CPU performance optimization.
• Programming Skills: Expertise in C/C++ programming for performance optimization.
• Communication Skills: Excellent interpersonal and communication abilities to collaborate effectively within cross-functional teams.

Why Join Us?

• Work on cutting-edge technologies and contribute to the development of high-performance systems.
• Collaborate with a dynamic team of experts in semiconductor and hardware design.
• Make an impact on the performance of next-generation hardware systems.

Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.

Job Summary:
We are looking for a highly skilled AI Chip Processor Core Verification Engineer to design, verify, and enhance AI processor cores. This specialized role demands deep expertise in hardware verification to ensure the functionality, efficiency, and performance of AI chips through systematic test planning and execution.

Key Responsibilities:

• Testplan Development & Verification:
  Develop comprehensive test plans, create and manage testbenches, and ensure thorough testing by analyzing code/functional coverage. Prepare detailed verification reports.
• Gate-Level Simulation:
  Conduct gate-level simulations to validate chip designs, generating and presenting simulation reports.
• Efficiency Improvement:
  Write and refine scripts (in Shell/Python) to automate tasks and enhance the verification workflow, improving overall efficiency.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Proficiency in UVM (Universal Verification Methodology) for testbench development.
  • Hands-on experience with Shell and Python scripting for verification tasks.
• Soft Skills:
  • Strong interpersonal and communication skills to work collaboratively with cross-functional teams.

Software Engineer (SAP Specialist)

Responsibilities:

• Provide SAP Techno-functional Support in FI/CO or SD/MM/PM modules.
• Involve in analysis, design, coding / configuration and testing of SAP System.
• Work with business users to understand their business requirements
• Develop interfaces between SAP with external systems.
• Analyse the software issues, diagnoses the technical faults and suggest the precaution measures along with accurate troubleshooting methodologies
• Ensure safety practices and housekeeping is to be maintained to the highest standard

Requirements:

• Possess a Diploma/Degree in Computer Science / Information Technology or equivalent
• Knowledgeable in SAP and programming languages such as ABAP.
• Good interpersonal, analytical and problem-solving skills
• Minimum 2-3 years of relevant working experience is required

About us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

We are looking for an Application Support Engineer to join our exciting team, to play a pivotal role in our banking technology division, responsible for ensuring the reliability, performance, and availability of critical banking applications.

Responsibilities

• Oversee the bank’s portfolio of applications, ensuring their stability, availability, and performance.
• Hands-on work on technical issue troubleshooting and ensure application functionality.
• Participate in the planning and execution of application upgrades and enhancements.
• Monitor system performance, track incidents, and proactively address potential issues.
• Ensure compliance with regulatory and security requirements for banking application.
• Continuously work towards making improvements in the release process.
• Provide regular reports on application support metrics and key performance indicators (KPIs).
• Support project team on DEV, SIT and UAT environment deployment and troubleshooting.
• Familiar with ITIL based Bank IT process, especially on incident, problem and change management.

Requirements

• Bachelor’s degree in computer science, Computer Engineering, Electrical Engineering, or related fields.
• 3 years of Technical/Application Support experience on multi technology platforms.
• Good knowledge on Linux OS, Windows Server, PostgreSQL, SQL Server, Oracle.
• Cross-platform experience and the expertise to identify and resolve integration issues.
• Excellent understanding of the CI/CD practice.
• Familiar with application release methodology.
• Experience in software development lifecycle and agile development methodologies.
• Experience working in a financial services institution with understanding of MAS technology risk requirements.
• Highly self-motivated to excel in assigned tasks and to deliver results for a digital bank.
• Good communication and coordination skills.
• Hands-on development experience is a plus.
• Excited to work in a fast-paced environment.