• Report to the Head of Department at basis level and to the Lead Electrical Engineer at project level.
• Implement Company work processes, procedures and quality policies as required by project.
• Review Company contractual requirements, scope boundaries and support the Lead Engineer with the Management of change on assigned areas.
• Manage interfaces with equipment and package suppliers to comply with technical requirements, specifications and Client’s Basis of Design, Standards & Project Specifications.
• Ensure that that all risks related to his/her area or responsibility are identified, assessed and preventive measures are implemented in a timely manner when required.
• Support the Lead Engineer on verification activities as required by the verification body / classification society or other applicable approving authorities.
• Represent the Electrical Engineering discipline during meetings, audits, verifications, workshops and technical reviews and be responsible for an effective and timely resolution of identified issues.
• Provide technical support related to Electrical activities at the fabrication site, whenever required.
• Ensure the technical integrity of all Electrical Engineering activities and deliverables for work performed through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements.
• Continuously seek to improve working methods, tools and procedures and contribute actively to the Electrical Engineering Discipline development and experience transfer.
• Perform any other duties as assigned by supervisor.

Work experience requirements:

• Must have minimum 12 years of work experience in medium/large sized brownfield and/or greenfield projects in the Upstream Oil and Gas / Wind energy sector and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.

Qualifications:

• Bachelor’s degree in Electrical Engineering.

Other skills:

• Prepared electrical philosophies and specifications for electrical systems for concept, FEED, and detail engineering projects as necessary.
• Experience in electrical power system design and handling of power system studies.
• Dimensioning and calculation of electrical networks (High and Low voltage).
• Prepare Technical Requisitions for electrical packages like High and Low voltage switchgear, Transformers, Bulk materials etc.
• Input and Follow up of vendor documentation.
• Participate during Factory Acceptance Test (FAT)/Site Acceptance Test (SAT).
• Perform electrical calculations like cable sizing, lighting and heat tracing using relevant software’s.
• Client liaison regarding technical clarifications and queries.
• Co-ordinate electrical design within own discipline and on a multidiscipline level.
• Administration of tags in EIS (set up, define control objects, link to activity, data input etc.).
• Cable administration in relevant database like cabSys, AVEVA.
• Familiarity with Equinor systems (STID, STID TAG, procosys, Stidele, cable routing, SAP) will be a distinct advantage.
• Produce new and revise existing documentation and drawings in accordance with project document schedule.
• Assist in preparation of bulk material MTO.
• A good understanding and knowledge of oil and natural gas industry standards including but not limited to IEC, NORSOK, DNV and other relevant standards related to Electrical Design and Engineering.
• Computer literacy in MS Office.
• Effective technical communication (verbal and written) skills with proven ability to present technical issues to design teams, client, technical authorities and verification bodies.
• Effective interpersonal skills and ability to work well with people at all levels.
• A self-starter who can work independently, make sound decisions, analyses problems and provide focused solutions.

We regret that only shortlisted candidates will be notified.

Summary

The Apple Services Engineering (ASE) team is one of the most exciting examples of Apple's long-held passion for combining art and technology. These are the people who power the App Store, Apple TV, Apple Music, Apple Podcasts, Fitness+ and Apple Books. And they do it on a massive scale, meeting Apple's high expectations with dedication to deliver a huge variety of entertainment in over 35 languages to more than 150 countries. These engineers build secure, end-to-end solutions. They develop the custom software used to process all the creative work, the tools that providers use to deliver that media, all the server-side systems, and the APIs for many Apple services. Thanks to Apple's unique integration of hardware, software, and services, engineers here partner to get behind a single unified vision. That vision always includes a deep dedication to strengthening Apple's privacy policy, one of Apple's core values. Although services are a bigger part of Apple's business than ever before, these teams remain small, nimble, and cross-functional, offering greater exposure to the array of opportunities here.

Description

As an SRE at Apple, you will work on world-renowned internet services that serve hundreds of millions of users worldwide. You’ll collaborate closely with development teams and other stakeholders in the entire lifecycle of services from inception through deployment and continuous refinement. Your responsibilities will include monitoring performance and availability, capacity and disaster recovery planning, defining Service Level Objectives (SLO) and ensuring the reliability and resiliency of systems. Join us if you thrive on solving large-scale problems through your expertise and collaborative team work.

• Support and lead cross functional projects across multiple services - Design, analyze and troubleshoot complex mission-critical distributed systems on a global scale.
• Provide OnCall support to 1st level production support teams.
• Participate in incident management and blameless postmortems.
• Detect and resolve performance bottlenecks, enhance service efficiency.
• Write clear technical documentation, production run books.

Apple is an Equal Opportunity Employer that is committed to inclusion and diversity. We also take affirmative action to offer employment and advancement opportunities to all applicants, including minorities, Women, protected veterans, and individuals with disabilities. Apple will not discriminate or retaliate against applicants who inquire about, disclose, or discuss their compensation or that of other applicants. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Minimum Qualifications

• BS degree in computer science or equivalent field with 5+ years or MS degree with 3+ years experience, or equivalent.
• At least 5 years in a Site Reliability Engineering, DevOps or infrastructure focused role
• Excellent written and verbal communication skills
• Experience in supporting internet-facing production services and distributed systems
• Experience in collaborating effectively across organizations, building strong relationships
• Proficient coding experience with Python or similar scripting languages
• Experience with containers and container orchestration platforms such as Docker and Kubernetes
• Experience with monitoring tools such as Splunk, Grafana, and Prometheus
• Demonstrated ability to deliver results on time with high quality
• Experience in managing and scaling distributed systems in a public, private, or hybrid cloud environment
• Experience in debugging Java code and optimizing JVM performance is plus.
• Understanding of the Linux Operating System, standard networking protocols, and components

Preferred Qualifications

• Passion for crafting and building reliable systems
• Strong sense of ownership and integrity proven through clear communication and collaboration
• Automation advocate - you truly believe in removing operation load with software
• Excellent troubleshooting and problem solving skills

Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skill

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

1. Conduct lab-based research and perform experiments.
2. Collaborate with colleagues both inside/outside the group.
3. Assist in daily lab management duties.
4. Present and report research results and publish scientific results in peer-reviewed journals in a timely manner.
5. Ensure compliance with environment, safety, health and quality program requirements from all levels (e.g. university, faculty of engineering and the department of MSE).
6. Translation and commercialization. Training will be provided

Job Requirements

A bachelor and a master degree in Chemical Engineering, Material Engineering or related field is required. The candidate should have 2-3 years of experiences in doing research.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry-partnered Ignition research project where you will be part of a collaborative team exploring innovative ways of characterizing the physical and rheological properties of liquid personal care products and understanding the impact of these properties in product design and process development.

Key Responsibilities

• In this role, you will perform shear and extensional rheological characterization of a large variety of liquid personal care products including lotions, topical oils, and more. We will explore innovative and emerging methods of rheological characterization and analyzing rheological data to extract material parameters to build a database of materials. Working with our industrial partner we will establish an understanding of rheological properties that are useful for product formulation and process design related to lab and larger scale extrusion/dispensing applications.More specific responsibilities include:
  • Participate in and manage the research project with Principal Investigator (PI), and the research team members to ensure all project deliverables are met.
  • Undertake development of rheological protocols and characterization of liquid personal care products
  • Formulate model materials with various additives to understand their impact on product rheology
  • Design, execute, and interpret experiments independently and with support from the PI.
  • Prepare and deliver written articles, reports, and presentations for industrial partners and external audiences.
  • Attend and present at regular group meetings to receive feedback on work done and future plans
  • Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
  • Coordinate procurement and liaison with vendors/suppliers.
  • Work independently, as well as within a team.

Job Requirements

• Have relevant competence in the areas of rheological characterization and analysis, wet lab work, material formulation
• Have a degree in pharmaceutical engineering, chemical engineering, mechanical engineering, food or materials science/engineering, or a related field. Possessing a Master’s degree will be advantageous.
• Knowledge of any of the following will be advantageous: material dispensing/extrusion processing, material science, textural and sensory analysis

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development.
• Proficient in communicating via technical writing and presentations.
• Possess strong analytical and critical thinking skills.
• Show strong initiative and take ownership of work.

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to thermal management of flexible electronics. You will play a key role in designing and fabricating flexible electronic devices, with a specific focus on solving challenges related to overheating and heat dissipation.

Responsibilities:

• Design and fabricate integrated thermal management system for flexible electronics devices, including RF devices.
• Conduct thermal simulations to identify potential thermal issues and optimize the heat dissipation capabilities of the devices.
• Develop and implement innovative thermal management materials, structures, and approaches to address overheating challenges in flexible electronics.
• Explore and evaluate new materials for efficient heat transfer, storage, and dissipation in flexible electronic devices.
• Collaborate with interdisciplinary team members to integrate thermal management solutions into the overall device design and fabrication process.
• Perform experimental characterization of thermal properties and performance of flexible electronic devices using appropriate measurement techniques and equipment, including IR thermal imaging and thermal reflectance system.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

To apply, please submit your application materials, including a cover letter and curriculum vitae.

Review of applications will begin immediately and continue until the position is filled.

Qualifications

Candidate should meet at least 4 criteria from the following list:

• Bachelor’s or Master’s Degree in Electrical Engineering, Chemistry, Materials Science, or a related field with a focus on flexible electronics and thermal management.
• Strong background in thermal management of electronic devices.
• Proficiency in thermal simulation software for analyzing and optimizing thermal performance.
• Knowledge of thermal management techniques and strategies for flexible electronics, including heat dissipation mechanisms and materials.
• Experience in developing and characterizing novel materials for heat transfer, storage, and dissipation in electronic devices.
• Familiarity with experimental techniques for thermal characterization, such as thermal imaging and thermal reflectance.
• Strong problem-solving skills and ability to think critically about thermal management challenges in flexible electronics.
• Excellent written and verbal communication skills, with the ability to present research findings effectively.
• Track record of research publications in reputable scientific journals.

Job Decription:

• Attend to customer quality issues.
• Improve manufacturing processes and products
• Provide quality services to ensure compliance with the quality system
• Achieve quality targets of products

Requirements :

• Diploma / Degree in Engineering
• No Experience are required
• Good interpersonal and communication skills
• Proficiency in spoken and written Chinese is required to deal with Chinese stakeholder

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.
  

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With min. 2 years of relevant experience in similar field.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Salary - ($5,200 - $6,000)

Mon - Fri, 8am - 5:15pm

Job Description:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations

Job Requirements:

• Diploma/ Degree in Mechanical Engineering
• Minimum 2-3 years related work experience
• 2D & 3D CAD operations; strong in CATIA
• Proficient in Microsoft ( Excel / words / powerpoint )
• Good technical design and engineering background would be highly advantageous
• Solid work test will be conducted during interview

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description

• Reporting to Global Category Microcontroller & Memories (MCM), strive to secure “Best in Class” consistent and sustainable supplier quality performance to reach the Continental Business and Quality targets.
• Maintenance of the defined Supplier Quality Management System (procedures, guidelines, and tools) to ensure the requested quality is in line with the defined supplier management strategies to meet the quality targets.
• Execution of supplier evaluations and assessments to support the cross-functional supplier selection team with the required quality data.
• Driving supplier development & improvement activities at supplier's site.
• Initiation and introduction of the preferred supplier and components strategy.
• Design, initiation, and control of preventive quality management measurements in the design and development phase for supplied parts and services to ensure that our products meet the quality requirements defined.
• Component introduction through robust APQP process which include Component sourcing, writing of specifications, handling of qualifications and risk management.
• Manage change requests (PCN) from component suppliers and assure comprehensive qualification of any change.
• Support of the data system to collect and evaluate supplier quality related key performance indicators (KPIs) for the regular reporting of quality performance.
• Support for the continuous improvement process of all supplier quality-related processes, guidelines, and tools by means of supplier audits, on-site assessments, and benchmarking and best practice sharing programs.

Qualifications

• Degree in Electronics/Electrical Engineering (or related) with minimum 5 years’ experience, preferably in the automotive industry
• Candidates with experience in semiconductor processes (e.g., wafer process technologies, back-end assembly, and testing), knowledge in electronic component & qualification requirements (e.g., AEC-Q, JEDEC, IP qualification) preferred. Candidate with more work experiences may be considered for Principal role.
• Strong experience in quality systems, process audits and part qualification.
• Understanding of automotive practices such as APQP/PPAP/VDA6.3/IATF16949.
• Able to lead suppliers' development and audit activities within Asia.
• Able to work independently and travel frequently (e.g. SE-Asia, China, Japan & S. Korea).
• Strong interpersonal and communication skills e.g. in collaborations, problem solving process, conveying technical details and presentation.

Renumeration: ($3,000-$4,000)

15% of basic as monthly commission paid quarterly

Location: City Hall

Work Hours: Mon - Fri

Job Description

● Implement strategies to acquire new clients and expand the customer

base within the security and IT solutions industry

● Perform needs assessments to understand clients' security requirements

and recommend suitable solutions

● Maintain up-to-date knowledge of advancements in technology and the

company's product offerings

● Provide product demonstrations and compelling presentations to highlight

the benefits of solutions

● Craft tailored sales proposals that address clients' specific security needs

and emphasize the value proposition

Job Requirements

● A bachelor's degree in IT engineering, or related field is preferred. Additional technical qualifications in security systems or electronics are highly advantageous

● Demonstrated success as a sales executive in the IT or physical security industry, with specific knowledge of CCTV, access control systems (ACS), network technology

● Exceptional communication skills to articulate technical concepts to diverse audiences, strong analytical and problem-solving abilities to craft custom solutions, and proven negotiation expertise.

● An established network within the security industry is advantageous

● Experience with selling SaaS solutions (CRM, cloud-based ACS/VMS) is highly advantageous.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description

Your responsibilities:

• You will work include face-to-face and remote selling to both new and existing customers including selling directly to the end consumer/business purchaser or indirectly through various sales channels.
• You will assess customer needs and suggesting appropriate products, services, and/or solutions.
• You will be developing, delivering sales bids, presentations, proposals and conducting product demonstrations.
• You will identify, contact prospective customers, building relationships to generate future sales and repeat business Incumbents matching to this specialization are compensated based on achievement of sales targets.
• You will manage projects / processes, working independently with limited supervision, coach and review the work of lower-level professionals and problems faced are difficult and sometimes complex.
• Living Hitachi energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Your background:

• University degree in Engineering.
• 3 to 5 years of working experience.
• Entry level candidates are welcome to apply.
• Ability to work collaboratively with employees within department and across functions.
• Possesses excellent interpersonal, communication, problem-solving skills and capable of working effectively under own initiative.

technical understanding requirement .

a) understands the drawings and scope of works

b) understands the implications of different technicalchoice so as to meet the project objectives

c) involve in providing value engineering solutions basing on his knowledge .

d) to have knowledge in the preparationof engineering proect proposals and method statements .

e) carry out project objectives so align with company goals.

f) to co-ordinate program and monitor site work , materials , plant and equipment .

g) involving in client /consultant / sub-contractor meetings .

h) to carry out short term planning to meet site progress .

g) shop / as build drawing preparation .

h) Assists project manager in monthly progree report

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Scope:

• Collaborating with project managers to understand project requirements, specifications, and expectations
• Participating in project planning and scheduling activities
• Inspecting construction sites regularly to monitor progress and ensure compliance with design specifications
• Implementing and maintaining quality control procedures to ensure the project meets industry standards and regulations
• Conducting tests on construction materials to ensure they meet required standards
• Collaborating with architects, engineers, and other professionals to coordinate activities and resolve design issues
• Provide technical solutions to problems encountered during the construction process
• Efficiently managing resources, including labour, materials, and equipment
• Implementing and enforcing safety protocols to ensure a safe working environment
• Conducting regular safety inspections and addressing any issues promptly
• Maintaining accurate and up-to-date project documentation, including daily reports, progress reports, and as-built drawings
• Keeping records of materials used, labor hours, and equipment usage
• Identifying and resolving construction-related issues and challenges as they arise
• Providing regular updates to project stakeholders on progress, challenges, and milestones
• Undertake any other duties assigned by management from time to time

Job Requirement:

• Master’s degree in engineering or a related field
• At least having 2 years relevant experience in engineering or site engineering in construction industry
• Strong knowledge of construction methods, materials, and processes.
• Familiarity with relevant construction codes, regulations, and safety standards.
• Proficiency in using construction management software and tools.
• Excellent communication and interpersonal skills.
• Problem-solving skills to address unexpected challenges.
• Attention to detail and a commitment to quality.
• Able to multi-task and work under tight schedules
• Strong negotiation and problem-solving skills
• Able to face challenging tasks and meet high standards and deadlines
• Able to attend to emergency call due to project and works needs beyond office hours
• 6 working days

We are regret that only shortlisted candidates will be notified.

Responsibilities

• Formulate strategies to build a lasting digital connection with customers and grow followers, brand interest and engagement through engaging content across different digital platforms.
• Plan and monitor the ongoing company presence on social media (Facebook, Instagram, Linked In, Youtube and other new platforms)
• Launch optimized online adverts through Facebook or Google etc. to increase company and brand awareness.
• Brainstorming new digital marketing platforms and ways to capture customer attention
• Compose online copywriting, proofreading and editing for various digital marketing content to ensure consistency in branding
• Design of online marketing collaterals such as graphic illustrations, photo and video production via Adobe Design Software or Canva.
• Acquire insight in online marketing trends and keep strategies up-to-date.
• Conduct market surveys, research trade information, and analyse competitor’s online strategies.
• Deliver monthly proposals, reports, presentations and share insights to develop optimization plans and provide action plans
• Any ad-hoc duties as assigned

Requirements

• Minimum 3 years of relevant working experience
• Creative thinker & self-starter
• Excellent understanding of digital marketing concepts and best practices
• Experience with B2B social media, Google Adwords and SEO
• Skills and experience in creative content writing
• Analytical mindset and critical thinking
• Excellent communication and interpersonal skills

Role Description

This position reports to the General Manager, interfacing with Company managers, suppliers, vendors, partners, and clients as regards brand and marketing strategy and policy implementation.

Specific Responsibilities

• Developing short and medium term strategies for increasing brand awareness for the Company.
• Conceptualising and executing marketing campaigns for the Company.
• Managing content creation, curation, and distribution for the Company's online platforms.

Competencies

• Participation in strategic planning.
• Using Agile methodology to plan for and achieve strategic goals and projects.
• Professional Engagement with Stakeholders.
• Exposure to best practices in marketing strategy and campaign execution.
• Database and record management.

Duration of Traineeship/Attachment Offered

• 6 Months

This position is hired for Info-tech & its subsidiaries:

Job Summary:

As the Creative Designer for our business you will be responsible for developing and executing creative solutions to enhance the user experience and drive user engagement on our platform. You will work closely with cross-functional teams to ideate, develop, and execute creative solutions that meet the needs of our users and advertisers.

Key Responsibilities:

1. Develop and execute creative solutions to enhance the user experience and drive user engagement on our platform.
2. Work with cross-functional teams to ideate, develop, and execute creative solutions that meet the needs of our users and advertisers.
3. Collaborate with the sales team to develop custom advertising solutions that align with advertisers' goals and objectives.
4. Manage the creative development process from ideation to execution, ensuring deliverables are completed on time and within budget.
5. Stay up-to-date on industry trends, competitive landscape, and emerging creative technologies.

Qualifications:

1. Bachelor's degree in design, advertising, or a related field.
2. 2-3 years of experience in creative development, preferably in a B2B or online environment.
3. Strong understanding of creative technologies and platforms, including Adobe Creative Suite, HTML, CSS, and JavaScript.
4. Proven experience in managing a team of creative professionals.
5. Excellent project management skills and ability to work in a fast-paced, dynamic environment.
6. Excellent written and verbal communication skills.

Key Responsibilities:

1. Offline Marketing Strategy: Develop and implement comprehensive offline marketing strategies to support the company's goals and objectives.
2. Collateral Development: Conceptualize, design, and produce offline marketing collaterals such as brochures, flyers, posters, and promotional materials that effectively communicate our value proposition and key messages.
3. Event Management: Plan, coordinate, and execute offline events including trade shows, conferences, seminars, and workshops. Manage all aspects of event logistics, from venue selection and booth setup to attendee engagement and post-event follow-up.
4. Print Advertising: Identify opportunities for print advertising in relevant publications, negotiate advertising placements, and oversee the creation and production of print ads.
5. Direct Mail Campaigns: Develop targeted direct mail campaigns to reach potential customers and drive engagement. Manage the end-to-end process, including audience segmentation, content creation, printing, and distribution.
6. Partnership Marketing: Collaborate with partners and vendors to explore co-marketing opportunities such as joint events, co-branded collateral,and cross-promotions.
7. Budget Management: Manage the offline marketing budget effectively, ensuring maximum ROI and cost efficiency in all initiatives.
8. Measurement and Analysis: Track and analyze the performance of offline marketing campaigns and initiatives. Utilize data and insights to optimize strategies and improve outcomes.

Qualifications:

• Bachelor's degree in Marketing, Communications, or a related field.
• Proven experience in offline marketing, preferably within the technology or SaaS industry.
• Strong creative and design skills, with proficiency in graphic design tools such as Adobe Creative Suite.
• Excellent project management skills, with the ability to multitask and prioritize in a fast-paced environment.
• Exceptional written and verbal communication skills.
• Strategic thinker with a results-driven mindset.
• Detail-oriented with a keen eye for design and messaging.
• Ability to work both independently and collaboratively within a team.
• Knowledge of marketing analytics tools and techniques is a plus.

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a Pharmaceutical Innovation Programme Singapore research project where you will be part of a collaborative team exploring innovative ways of understanding extrusion processing for pharmaceutical drug materials and products using rheological measurements.

Key Responsibilities

In this role, you will characterize mixtures of pharmaceutical excipients and drug materials to develop methodologies for screening hot-melt extrusion formulations and selecting optimal operating conditions using rheology, with the objective of producing amorphous-solid-dispersions. You will validate the developed processing space and operating conditions for extruded pharmaceutical formulations using a lab-scale extruder. In collaboration with researchers at the Singapore-MIT Alliance for Research and Technology (SMART), you will characterize the physical properties and performance of intermediate pharmaceutical drug products. The created methods will be transferred to the industrial partner to enhance their product development process using rheological characterization.

More specific responsibilities include:

• Participate in and manage the research project with Principal Investigator (PI), and the research team members to ensure all project deliverables are met.
• Undertake characterization of pharmaceutical active ingredients, polymeric excipients, and plasticizers for producing amorphous-solid-dispersions.
• Perform lab-scale hot-melt extrusion of pharmaceutical materials to validate predicted processing conditions and product outcomes.
• Collaborate with broader pharmaceutical research team at SMART.
• Design, execute, and interpret experiments independently.
• Author papers in high-quality journals in areas that are related to the research.
• Prepare and deliver reports and presentations for industrial partners
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaise with vendors/suppliers.
• Work independently, as well as within a team.

Job Requirements

• Have deep hands-on experience with at least one of the areas of polymer rheology, extrusion processing, pharmaceutical engineering with small molecules.
• Relevant competence in the areas of wet lab work, analytical instrumentation, material science and formulation
• Have an advanced degree in chemical engineering, mechanical engineering, materials science and engineering, or a related field.
• Knowledge of any of the following will be advantageous: rheology, physical characterisation, crystallisation, polymer melts, extrusion, material physics.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development.
• Proficient in communicating via technical writing and presentations.
• Possess strong analytical and critical thinking skills.
• Show strong initiative and take ownership of work.