Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Responsibilities

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

How to Apply:

Interested applicants, kindly click on “APPLY NOW”

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pang Seng Leng Diana

EA Personnel Reg No: R1106651

Are you passionate about maintaining robust and high-performing infrastructures? Do you thrive in managing complex network environments and ensuring system reliability? 

Join our infrastructure team and help us elevate operational excellence to new heights.

As a Site Reliability Engineer at Flowdesk, you will be at the heart of our infrastructure operations, ensuring that our global high-frequency trading platform runs smoothly and efficiently. 

Reporting to Flowdesk's Lead of Infrastructure and collaborating closely with the Engineering, Trading, and Data teams, your role is crucial in maintaining and enhancing our systems' reliability and performance

Your mission will be to

• Monitor and optimize our network infrastructure to ensure peak performance and minimal downtime.
• Implement and manage robust monitoring solutions (using tools like Prometheus and Grafana) that proactively detect and resolve issues.
• Maintain critical infrastructures, ensuring reliability security, scalability, and performance of the company’s essential systems, such as Nats, the ultra-low latency networking stack, cloud infrastructures, data pipelines, and more.
• Develop the in-house MPC (Multi-party Computation) infrastructure to ensure reliability and performance.
• Collaborate with the team to design and refine disaster recovery plans that minimize risk and ensure rapid recovery during incidents.
• Engage with Flowdesk's teams to understand their needs and provide technical support and solutions that enhance their operational capabilities.
• Propose and implement system improvements and innovative solutions to enhance performance and reliability.

Background and experience

• 5+ years of experience
• Fluency in English (French is a plus).
• Proven track record in managing and securing high-availability systems in highly sensitive environments.
• Experience with network and system monitoring tools like Prometheus, Grafana, and similar technologies.
• Strong background in implementing and managing incident response strategies and disaster recovery plans.
• Skilled in system automation and scripting (Python, Bash), with a solid understanding of Kubernetes and cloud services (AWS, GCP).
• Familiarity with DevOps methodologies and tools for CI/CD (FluxCD, GitHub Actions).
• Excellent problem-solving skills, with the ability to communicate complex technical information to non-technical stakeholders.
• Organized and methodical approach to work, with the capability to prioritize urgent tasks and meet deadlines.
• A strong interest in continuous learning and applying new technologies and concepts to improve system performance and reliability.

Join our team and contribute to a resilient and cutting-edge trading infrastructure that supports Flowdesk's growth and innovation in the crypto market!

• International environment (English is the main language)
• An allowance of 400 SGD / per month / per person in the household
• Top-of-the-range equipment Macbook, keyboard, laptop stand, 4K monitor & headphones
• Team events and offsites
• Coming soon, gym memberships, international mobility & lot of other cool benefits!

Are you interested in this job but feel you haven't ticked all the boxes? Don't hesitate to apply and tell us in the cover letter section why we should meet!

Here's what you can expect if you apply

1. HR call (30') Get to know Flowdesk and discuss your experience.
2. Technical round with the Lead of the Infrastructure team (60’)
3. Technical interview with the Head of the Infrastructure department (60’)
4. Culture fit with the Lead Talent Acquisition (30')
   

We focus on conversations, not trick questions. These discussions will help you understand how Flowdesk operates and allow you to share your journey and what you’re looking for in your next role.

So... Ready to Join Us?

If you’re excited by the opportunity to shape crypto's future and directly impact our cutting-edge infrastructure, we’d love to hear from you! Apply today and let’s explore how we can build great things together.

Primary Objectives of Position

• Lead a team of senior / technicians to carry out scheduled Preventive Maintenance and Corrective Maintenance together on passenger trains/engineering vehicles/light rail vehicles/component/equipment as assigned by supervisor.
• Ensure the team comply with all PM & CM works and related tasks with approved work instructions, quality procedures, safety and operational procedures, and good maintenance standards.
• Plan and coordinate within the team and other teams to complete the assigned maintenance tasks within the established standard time.
• Ensure the team has the necessary qualifications and authorization to carry out daily tasks and any assigned tasks by supervisor.
• Responsible for the safety, welfare and discipline of the team.
• Responsible for the upkeep of the team equipment/tools and working environment

Major Responsibilities

• Responsible for team's quality and standards of the PM/CM works within the established standard time and be competent to carry out preventive and corrective maintenance tasks within the established standard time in accordance to work instructions and related documents, as assigned by supervisors.
• Exercise safety always, in accordance to established safety procedures.
• Responsible for the safety of self and all co-workers, inclusive of contractors.
• Demonstrate sufficient ability in diagnostic and troubleshooting electromechanical systems.
• Forecast and plan his team and resources to complete maintenance tasks and assigned tasks timely.
• Perform supporting maintenance activities such as Train Driver/Shunter, overhead crane operator, forklift driver, etc. as authorized and required by the supervisor.
• Able to work on a shift roster system in accordance with the MOM guidelines and the Collective Agreement.
• Undertake any other tasks or functions that are incidental or ancillary to the performance of the works assigned by supervisor.

*The above activities are no means exhaustive and are subjected to amendment whenever is needed.

Specific Safety Responsibilities

• Undertake daily safety checks on trains and only signs trains off as fit for service after they have been properly checked.
• Carry out repairs on trains in a safe way according to training received and only signs the work off as complete after thorough checks have been carried out.
• Undertake work in accordance with Company Rules and Procedures.
• Remains constantly vigilant for unexpected defects on trains and report them immediately to his Supervisor.

Job Specifications

• Higher Nitec (with Experience) or Diploma in Engineering (Electrical/Electronic/Mechanical/Mechatronic Engineering).
• Minimum 2 years relevant working experience in maintenance/repair/installation of electrical or mechanical equipment.
• Fresh graduate with good academic results will also be considered.
• Experience in railway environment will be an added advantage.
• Must have analytical & fault-finding skills.
• Understand at least two of electrical/electronic/air conditioning/pneumatic/mechanical system.

Attributes

• Good working attitude with strong commitment to job assignments.
• Able to communicate well with staff at all levels.
• Have good initiatives and strong trouble shooting skills.
• Demonstrates strong leadership qualities and is capable of motivating teammates
• Required to work on 3 rotating shift and required to be on 24 hours standby round the clock for any unforeseen emergency recall.

We regret to inform that only shortlisted applicants will be notified.

Remuneration: $3,500 - $4,000

Working Hours: Mon - Fri, 7:30am - 5pm

Key Responsibilities:

• Minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiate, implement, and manage the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes adhere to all Regulatory and Statutory Requirement.
• Establish and prepare process documentation
• Make recommendations for improving plant operations and solving production-related problems.
• Train respective subordinates
• Conduct employee performance reviews based on job descriptions
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.

Job Description:

• Minimum 2 years working experience in manufacturing environment.
• Nitec / Higher Nitec / Diploma in M&E or Mechanical Engineering
• Able to supervise and lead the subordinates.
• Willing to work after working hour or during non-working days.
• Knowledge in ISO would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team

Job Requirements:

• Higher NITEC in Mechanical Engineering.
• Advanced skills using company software
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

We are seeking an experienced Executive Engineer, Underground Structures to join our team in Singapore, Singapore. In this pivotal role, you will lead the design and execution of complex underground infrastructure projects, ensuring the highest standards of safety, efficiency, and innovation.

• Oversee the planning, design, and construction of underground structures, including tunnels, underground stations, and deep foundations
• Develop and implement engineering solutions for complex geotechnical and structural challenges
• Manage project teams and collaborate with cross-functional departments to ensure timely project delivery
• Conduct detailed structural analysis and design for underground facilities
• Ensure compliance with local and international safety regulations and construction standards
• Evaluate and implement innovative construction methods and technologies to improve project efficiency
• Provide technical leadership and mentorship to junior engineers
• Prepare and review technical reports, design calculations, and construction drawings
• Liaise with clients, contractors, and regulatory authorities to address project-related issues
• Participate in business development activities and contribute to proposal preparation

Experience : 6 + Years

12 months Contract

Willing to work in 24/7 shifts ( Morning , Afternoon & Night )

Position Overview:
We are seeking a highly skilled Site Reliability Engineer (SRE) to provide Level 2 technical support

. The ideal candidate will handle critical tasks such as transaction investigations, scheme rejections, dashboard creation, application monitoring, and incident resolution, while ensuring seamless operations in a 24/7 environment.

Key Responsibilities:

1. Technical Support:
   • Provide Level 2 technical support for the application.
   • Investigate transaction inquiries and ensure timely resolution.
2. Monitoring and Analysis:
   • Create dashboards in Kibana for real-time monitoring of critical applications.
   • Fetch and analyze application logs from Kibana and Linux servers to investigate issues.
3. Data Management and Reporting:
   • Write and execute SQL queries to extract data for business requirements.
   • Generate financial reports in Oracle to meet audit and compliance needs.
4. Incident and Change Management:
   • Provide 24/7 support to resolve P1 incidents within SLAs.
   • Create and implement change requests for bug fixes, OS/server patching, and application restarts.
   • Support all infrastructure-level activities for the applications.
5. Disaster Recovery (DR) Support:
   • Deliver 24/7 DR support for the business.
6. Documentation and Process Improvement:
   • Prepare knowledge transfer (KT) documents for new processes and technical troubleshooting.
   • Investigate deviations from standard processes and escalate as per the escalation matrix.

Skills and Experience:

• Strong expertise in transaction processing platforms.
• Proficiency in SQL and experience in generating reports in Oracle.
• Hands-on experience with Kibana for dashboard creation and log analysis.
• Solid understanding of Linux servers and command-line tools.
• Experience with change management processes, including OS/server patching and application maintenance.
• Proven ability to handle P1 incidents under tight SLAs in a 24/7 support environment.

Qualifications:

• Experience in supporting merchant acquiring or payment gateway applications in a Bank
• Experience of financial transaction workflows, clearing, and settlement processes.
• Familiarity with ITIL processes for incident and change management.

Work Conditions:

• 24/7 support , willing to work in rotational shifts
• Willingness to support disaster recovery operations and participate in weekend or after-hours maintenance activities.

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Mechanical Engineering
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Electrical / Mechanical Engineering.
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

This position is ideal for those who is passionate about solving challenging business problems and building applications that provide an excellent user experience. As a Staff Data Engineer, you will be an integral part of the Loyalty and Marketing development team, focusing on designing and building software solutions that leverage data to solve business problems.

The role is for a self motivated individual with strong foundational software engineering skills. The candidate will be extensively involved in hands on activities, including POCs, design, documentation, and development of new functionality. The candidate must be flexible and willing to switch tasks based on the team's needs.
Responsibilities:

• This position is ideal for an engineer who is passionate about solving challenging business problems and building applications that provide excellent user experiences. You will be an integral part of the Loyalty development team focusing on design and building of software solutions that leverage data to solve business problems.
• Strategic thinker and good business acumen to orient data engineering to the business needs of internal clients.
• Lead development and oversee programming testing functions to ensure that projects are securely delivered while fulfilling expectations.
• Identify opportunities for further enhancements and refinements to standards and processes.
• Lead by example, demonstrating accountability, mentoring junior team members, and by contributing to departmental procedures, best practices, and standards.
• The candidate will be extensively involved in hands on activities including POCs, design, documentation, coding, testing, implementation, and documentation of solutions for new development, system enhancements, and production support.
• Candidate must be flexible and willing to switch tasks based on team's needs.
• Development and programming functions to ensure that projects are delivered on time and within budget with good code quality.
• Work with architects, systems analysts, project managers, QA, and other developers to successfully implement business requirements while applying the latest available tools and technology.
• Responsible for the architecture, design, development, implementation of data based software applications. This includes working with both business and technical stakeholders to deliver high quality products and services that meet business requirements and expectations.
• Interact with business units to define requirements and modifications and use case to utilize in designing appropriate solutions.
• Provide recommendation on scope and scale of effort required to develop solution.
• Design, develop, document, and implement new programs and subprograms, as well as enhancements, modifications, and corrections to existing software Develop testing and debugging routines.
• Create documentation and procedures for installation and maintenance.
• Build and maintain relationship with global and virtual teams and third parties on software development or support issues.
• Identify opportunities for further enhancements and refinements to standards, best practices, and development methodologies.
• Work directly with Architects, System Analysts, Dev leads and QA team leads to manage the technical aspects of a development pipeline.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Main Responsibilities

1. Plan and execute layout designs for modules or single-chip circuits, including routing and verification tasks such as DRC, LVS, and EM checks.
2. Enhance product performance through optimized layout design techniques.
3. Collaborate effectively with design engineers to achieve layout design objectives.
4. Prepare and review tape-out data for accuracy and completeness.
5. Draft layout design documentation.

Requirements

1. Bachelor’s degree or higher in Electronics, Microelectronics, or related fields.
2. Direct experience in analog and mixed-signal IC layout design; familiarity with EDA tools such as Virtuoso, Calibre, and EM verification tools.
3. Proficiency in CMOS/BCD MOS processes and device structures, as well as layout handling for common package types.
4. Familiarity with common ESD protection device structures, principles, and full-chip latch-up protection methods.

5. Strong written and verbal communication skills in both English and Chinese.

6. Proactive, diligent, and capable of working under pressure; excellent learning, communication, and teamwork skills.

This role welcomes both fresh graduates and experienced engineers.

System Integration Engineer Job Scope
For users with testing requirements such as SMPS, SERVER POWER, EVSE, PV, BATTERY, BOBC, Passive Components, and Safety Regulations, the Quantel System Integration Engineer is responsible for the design and implementation of Automated Test Systems (ATS), handling both hardware and software tasks throughout the project lifecycle.

Pre-Project Responsibilities

1. Participate in the pre-sales process for Automated Test Systems (ATS).

2. Evaluate the cost Bill of Materials (BOM) and project schedule for system integration.

3. Discuss and define test purposes, requirements, and acceptance conditions with clients.

In-Project Responsibilities

1. Hardware

a. Procurement of system cabinets and customized mechanical parts

b. Procurement and installation of electrical components.

c. Creation of electrical schematics.

d. Installation and wiring of Chroma or third-party instruments.

e. Conduct Factory Acceptance Testing (FAT).

2. Software

a. Program on Chroma’s exclusive testing platforms (SMPS ATS8000 / BatteryPro).

b. Develop programs based on user test requirements, regulations, and instrument configurations.

c. Conduct regulation studies to ensure compliance.

Post-Shipment Responsibilities

1. Provide online remote support and onsite technical assistance, including system installation, site acceptance testing, and training.

2. Follow up on technical issues, providing professional advice or troubleshooting support.

Requirements:

1. Strong foundational knowledge of electronic circuit principles.

2. Excellent time management skills to handle multiple projects effectively.

3. Proactive, self-motivated, and dynamic.

4. Willingness to travel internationally for technical support.

5. Ability to communication with the Taiwan headquarters.

We offer comprehensive professional technical training, including instrument application, software programming and operation, as well as overseas on-site training at client sites or the Chroma Taiwan headquarter.

6. Diploma in Electronics Electrical Engineering.

7. Fresh graduate or 1 years or more working experience

8. Preferable experience in Electronics Test and Measurement Instrument.

9. Class 2/3 driver licence.

10. Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

- IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

- Support HR on all employee on-board/off-board process including IT training;

- Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

- IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

- Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

- Troubleshoot and configure the firewall, router and switch when issues arises.

- Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

- Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

- All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

- Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

- Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

- Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

- Regular update antivirus related tools and window related system patches.

• IT governance and direction:

- Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

- Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

- Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

- Assist external or internal auditor on IT compliance or ISO related audit;

- Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

- IT project plan, budgeting and proposal;

- IT project deployment after project approved;

- IT project verification and provide necessary training to end user;

- IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

Job Description:

· Responsible in the design and development of highly complex and scalable Python modules.

· Take ownership of end-to-end technical delivery against project timelines and requirements.

· Participate in requirement analysis while recommending alternative solutions.

· Integrate applications using middle ware software’s such as Avro kafka and database design.

· Deploy applications to open shift via CICD pipeline.

· Working with application support, developers, and product owners to ensure successful releases.

· Flexibility to work extra hours to meet corporate and departmental goals.

· Must have the ability to prioritize and manage multiple concurrent tasks in a fast-paced environment while working

under pressure.

Job Requirements:

· Degree in Computing / Computer Science / Engineering preferred.

· 3 to 8 experience preferably in the financial / fintech industry.

· Experience in supporting trading desk

· Experience in Agile/Scrum methodology.

· Excellent troubleshooting and debugging abilities for 2 tier and multi-tier applications.

· Should have worked as first line application support for trading systems and back office with experience in

analysing of issues raised by end users and general system checks and maintenance tasks.

· Strong analytical & problem-solving skills.

· Experience in documenting the design and development work in confluence.

· Expertise in Python (OOPs Concepts, flask/Django frame works, multi-trading, web sockets, and analytics tools such

as pandas, NumPy etc).

· Highly Experienced in Database designing of SQL and PL-SQL with expertise in at least one RDBMS, preferably Maria

DB and MS- SQL.

· Highly Experienced in writing batch scripts using shell scripting.

· Experience in Linux, OpenShift, Avro based kafka, Dockers, Nginx, Sentinel Redis, AngularJS basics, Rest API’s (Flask),

JSON and web sockets amongst others.

· Experience in CI-CD (Continuous Integration Continuous Delivery) pipeline with experience in Bitbucket.

Job Purpose:

Seeking an experienced SAP Manager to oversee our Enterprise Resource Planning (ERP) system, currently running on SAP. The successful candidate will be responsible for reviewing the existing system, evaluating alternative ERP solutions, and, if necessary, planning and executing an upgrade. This candidate will manage a team of engineers and developers in the deployment and support of Teckwah’s business systems and lead the team to implement customizations and new capabilities to fulfill users’ and customers’ needs.

Job Responsibilities:

• Lead a team of support engineers and developers to provide operational support to users of the ERP system. This includes managing the team to provide level 1 and 2 support, addressing daily operational issues and requests, and offering technical advice to resolve system and operational problems.
• Engage with users and customers for new enhancements and modifications to the systems for new deployments or implementations. Plan these implementations, manage the team and resources for deployment, and, if necessary, collaborate with subject matter experts and consultants to implement enhancements that meet user needs
• Understand existing and future operational needs. Assist the head of the department in conducting a comprehensive review and assessment of the ERP systems. This includes planning and gathering further operational requirements, matching them with the capabilities of the existing (and upgraded) system, researching and evaluating alternative ERP systems to determine if better solutions exist, and proposing a suitable approach for the next-generation ERP system. Lead the implementation or upgrade of the system
• Understand system lifecycle management and processes, ensuring all system implementations, developments, and support adhere to TW-defined processes and industry best practices. Oversee the daily operations of the SAP system, ensuring its stability, reliability, and performance.
• As the leader of the team, plan and manage team members' support activities, training, and career development to fulfill their respective roles in Teckwah

Job Requirements:

Experience & Qualification

• Degree or equivalent qualifications in Information Technology, Computer Science / Computer Engineering, Engineering or related discipline.
• With 2 implementation experience in ERP systems.
• At least 5 years’ experience in managing SAP systems, with a strong background on SAP / S/4 HANA.
• Proficiency in SAP modules (esp FICO, WM, QA, MM, PP, SD), and with knowledge of SAP Basis, and ABAP programming.
• Project Management: a proven track record of managing large-scale IT projects, preferably ERP implementations or upgrades.

Skills & Abilities

• Project planning and control skills to enable expedient rollout of salient business systems
• Keep abreast of business development and continuously ensuring the relevance of business systems
• Able to develop systematic and structured processes to ensure continued sustenance of implemented systems
• Excellent verbal and written communication skills, with the ability to present technical information to non-technical stakeholders.
• Strong leadership and team management skills, with the ability to motivate and guide a team to achieve project goals.
• Strong analytical and problem-solving skills, with the ability to assess complex systems and processes.

Key Responsibilities:

• Liaise with Solutions team to understand systems design
• Perform installation, configuration and maintenance of network devices and AD server / management server on-site
• Assist Project Managers and Engineers to prepare systems related diagram for the project implementation
• Ensure systems design conforms to contract and technical requirements
• Engage with back line support and/or with vendor’s support to diagnose and rectify technical problems to effectively resolve project implementation issues
• Attend to preventive and corrective maintenance to backend system
• Ensure all work activities comply with the company’s safe work procedures

Competence (Knowledge, Skills and Abilities):

• Skills in relating to and servicing the customers with a win-win mind set
• Skills in troubleshooting technical problems related to servers, routers, switches, and IoT devices.
• Good knowledge of the security and surveillance solutions landscape and industry trends
• Knowledge on Microsoft Clustering, Active Directory, Agent VI, Milestone, VMware and IT Security is required
• Knowledge of CentOS, Ubuntu, VMware (ESXi), Firewall, Networking, and Windows Server OS
• Proficient in Active Directory, Certificate Services, Virtualization technology, and cyber security is required
• Skills in planning and scheduling
• Professional Certificate in MCSE and CISSP would be an advantage

Requirements:

• Minimum Degree in Computer Engineering or related discipline
• At least 3 years’ experience in a similar capacity
• Experience in installation on Server / Client configuration, Network Storage and IT Network

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

We are looking for a Package-Silicon Integration Engineer in Micron's Package Development Engineering (PDE) Group, who will be responsible for driving advanced package development for next generation silicon and package technologies. You will collaborate with various functional teams such as silicon wafer design, package design, wafer fab to meet project requirements. You will drive the technology development through multiple phases of product maturity and contribute to Micron's strategic objectives of Technology leadership.

RESPONSIBILITIES include but are not limited to:

• Work with package design and development teams to complete chip package interaction risk assessment.
• Work with scribe designers and assembly engineers to find solutions for dicing problems and implement relevant design rules/FMEA.
• Work with die designers to enable design for manufacturing in area like die size, scribe width and pad size.
• Collaborate with R&D/manufacturing wafer fabs and packaging teams to solve relevant issues, and improve yield, quality and manufacturability.
• Contribute to development of new silicon and package technologies by engaging with Micron’s internal factories.
• Define test vehicles, plan DOEs, characterize enabling technologies, document best-known-process and hand-off to manufacturing.
• Identify technology, quality, business process gaps and develop solutions.

EDUCATION, EXPERIENCE & QUALIFICATION REQUIRED

• Masters or Bachelor’s degree in Engineering (Mechanical, Materials Science, Electrical, Chemical) or related field
• 3-5 years of semiconductor fab/Assembly experience in Integration
• Strong Project / Program management skills
• Possess sound methodology for organizing work, decision-making and setting priorities
• Strong analytical, problem solving, and organizational skills
• Proficiency in computer applications like Excel, Word, Power Point.
• Self-motivated and team oriented.
• Strong interpersonal, oral and written communications-skills.

Keen on the role? Apply now!

Skillsets (Must have)

• Experience as a software engineer, with a minimum of 2+ years of proven DevOps and ideally DevSecOps experience.
• Strong knowledge and experience of programming languages such as Java, Python, C# or Javascript/Typescript.
• Good experience in developing software, writing unit/integration test cases and test driven development (TDD).
• Strong knowledge in Linux operating systems and commands.
• Strong knowledge and experience with Git.
• Strong understanding of Docker, Kubernetes (preferably Openshift 4).
• Good communication and written skills.

Skillsets (Good to have)

• Strong understanding of software development best practices including SDLC, Software Configuration and Change Management, Agile, Scrum, Kanban.
• Knowledge and experience with Jenkins, Gitlab, SonarQube, JFrog Artifactory, Cloudbees CD/RO (or equivalent CD tool), and JIRA.
• Knowledge and experience with Helm 3, Terraform and commonly used AWS services as well as AWS automation/IaC stack (e.g. AWS CLI, CloudFormation, Boto3, CDK).

JOB SCOPE & JOB RESPONSIBILITIES

• Experience in an engineering, procurement and operations.
• Ability to analyze bills of material and drawings to understand key requirements.
• Knowledge and direct experience in negotiating contracts and quotations with Contract Manufacturers and Suppliers.
• Ability to identify cost reduction opportunities.
• Responsible for procurement, sourcing and negotiation.

JOB REQUIREMENT

• Diploma or Bachelor degree in engineering.
• At least 3 years experience in procurement engineering.
• Good procurement knowledge is a must.
• Possess good analytical skills, resourceful and independent.
• Team player
• Effective verbal & written communication skills.

Job Scope:

• Responsible for co-ordination of all technical activities on assigned project and assist in ensuring successful completion and execution of the assigned projects.

• Set up network equipment/system for site deployment.

• Participate in Site Test with Customers.

• Ensure effective communication and coordination between all disciplines and project participants in the projects, to resolve all site issue hindering the work progress.

• Assist in planning, scheduling and coordination of works and ensure proper deliverables and full compliance to the approved standards.

• Report to the Project Manager on any site issues hindering the work progress. Highlight those changes that might result in omission or variation cost.

• Report to the Project Manager/Site Manager on work progress carried out on site.

Requirements

• Nitec in Electrical and Electronic Engineering.

• Strong communication and coordination skills.

• Basic Network knowledge is required.

• Experience in Wifi, CCTV and Network is preferred.

• Good planning and project management skills.

• Resilience and ability to work under high pressure.

• Good interpersonal skills and ability to manage difficult situations and client relations effectively.

• Experience with M&E Site Coordination will be an advantage.

• Able occasionally at night to work at work for maintenance support.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Engineer (PLC) to make an impact!

The Role:

As a Services Engineer, you will work within the Services operations team in Singapore and you will be responsible to support any job assign to you to ensure customer satisfaction with Schneider products and its services.

What will you do?

• Perform field service (customer site service) activities involving the installation supervision, commissioning, maintaining, modification, onsite training, system upgrade and repair of Schneider PLC.
• Responsible for a region or subgroup of field services.
• Performs installation supervision and commissioning of Schneider products including day to day service of the same.
• Performs maintenance for Schneider PLC.
• Trains customers on equipment operation and maintenance of Schneider PLC Product.
• Represents Schneider dealing with customer concerns.
• Responsible for identifying and reporting failure modes encountered when in the field. Also responsible for determining the cause of these failures.
• Solve Site problems at customers site and provides reports on these issues.
• Providing 24hrs telephone support for customers.
• Acquisition of Customer Service products.
• Support internal for spare parts warranty, preparation and assembly.
• Improve on site report and process.

What qualifications will make you successful?

• Min Diploma / Degree in Electrical & Electronics Engineering
• Min 3-5 yrs exp. in Oil & Gas sector, Power Generation, Petrochemical technical experience is an added advantage.
• Has experience and skilled in PLC. Technical knowledge of MV and LV equipment will be an added advantage.
• Willing to travel up to 80% within Region.
• Has teamwork and is customer oriented.
• Has good time management and able to work under pressure.
• Excellent verbal and written communication skills in English are essential.
• Ability to interface with all functional areas of the company.
• Skilled in Microsoft Office – Excel, Word and Power Point.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership
• …and more!

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

Job Description:
We are seeking a skilled and motivated System Performance Engineer to join our team. In this role, you will develop and optimize operator libraries for large model inference, training, and fine-tuning processes. You will map operator library implementations to hardware, conduct performance analysis, and identify bottlenecks to maximize system efficiency and performance.

Key Responsibilities:

• Operator Library Development: Develop and optimize libraries for large model inference, training, and fine-tuning, ensuring efficient operation on hardware platforms.
• Performance Analysis: Analyze operator library implementations to identify and resolve performance bottlenecks, optimizing for memory usage, processing time, and data accuracy.
• Optimization Implementation: Engage in the software design and optimization of operator libraries, including instruction-level parallelism, to maximize hardware performance.
• Mapping to Hardware: Map operator library implementation to the underlying hardware, ensuring seamless execution and improved performance.
• Testing and Validation: Perform detailed testing, including memory usage and processing time analysis, to validate optimized library performance.

Qualifications:

• Educational Background: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Strong understanding of large model algorithms and the principles behind their design.
  • Proficiency in computer architecture and many-core processor principles.
  • Practical experience in CPU performance optimization.
• Programming Skills: Expertise in C/C++ programming for performance optimization.
• Communication Skills: Excellent interpersonal and communication abilities to collaborate effectively within cross-functional teams.

Why Join Us?

• Work on cutting-edge technologies and contribute to the development of high-performance systems.
• Collaborate with a dynamic team of experts in semiconductor and hardware design.
• Make an impact on the performance of next-generation hardware systems.

Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.