As a Salvage engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to repair the ship's plant and get the systems up and running again. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, provide support to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager in the selection of new salvage equipment and setting up the right maintenance procedures.
• Maintaining company owned salvage equipment.
• Sharing knowledge with other engineers about complex ship's systems.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities
To make your mark as a salvage engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• A minimum degree in any field with experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Willingness to work on weekends and public holidays frequently, with OT and allowances compensated.

Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.
• Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma / Degree in Engineering
• Min 2 Years experience in chiller maintenance, commissioning, or related HVAC roles

All interested applicants, please send in your resume to: [email protected]

Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Responsibilities

• Work independently or as part of the Project Team in the planning and execution of projects
• Work with the drafting personnel on the design and preparation of shop drawings
• Review and submission of materials/equipment for approval
• Coordination with the various contractors on board the same project as well as liaising with the Client/Consultants on their requirements
• Monitor the progress and performance of direct workers and sub-contractors
• Ensure compliance with the requirements, perform inspection and testing with the relevant authorities as well as close supervision to ensure timely completion of the project
• Attend coordination and project meetings

Requirements

• ITE/Diploma/Degree in Electrical Engineering
• Minimum 5 years of experience working at construction sites
• Possess strong initiative and is resourceful and able to work independently or as part of the Project Team
• Able to critically analyse issues and create/identify solutions
• Good communication skills

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in various tunneling works

- Degree in Civil Engineering

- Accredited as a RE with a valid 2022/2023 IES certificate

- Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate

- comfortable with 56 hours work week

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

Responsibilities:

• Ability to understand design basis and project requirements (HSSE, scope, schedule, quality requirements, client & class requirement and project execution philosophy). Incorporate the project requirements in the engineering design and deliverables.
• Issuance of deliverables within schedule and quality. Complete electrical engineering and FAT, SAT of assigned packages on time within project schedule. Support commissioning and operations.
• Work closely with Project Lead to plan, manage the deliverables as per project requirements.
• Issue the deliverables as per the project timeline and quality requirements.
• Identify areas of improvement. Innovate the new ideas and methodologies to improve project schedule/cost saving/quality.
• Ensure proper change management control, anticipate the technical issues, and take preventive action to mitigate the risk.
• Control scope/ schedule/cost and mitigate the cost escalation or schedule delays.
• Liaise with internal and external stake holders. Ensure alignment with the project requirements and deliverables are approved.

Requirements:

• Possess Degree in Electrical Engineering or equivalent
• At least 10 years of relevant work experience
• Proficient in using MS office, AVEVA, E3D, Navisworks

Interested applicants are welcome to submit your resume to [email protected]

EA. R1107675

Agency no. 07C3676

• Prepare and submit technical shop drawings for approval.
• Project Management and site supervision of the Installation and Commissioning of Air-Conditioning and mechanical ventilation works at Residential and Commercial Building.
• Planning and Design of M&E and Air-Conditioning works
• Attend site meeting, site inspection with sub-contractor and consultants.
• Modify the M&E Drawing According to Site Condition.
• Conduct the testing & commissioning of ACMV system.
• Managed the supervisor and workers to complete within limited time.
• Prepare monthly project progress claim/ progress report.
• Estimating and predicting the cost of tenders.
• Working experience in Air-conditioning/Chilled Water system and Mechanical Ventilation

Responsibilities:

• Service existing accounts, obtain orders, and establish new accounts by planning and organizing daily work schedule to call on existing or potential sales outlets and other trade factors.
• Development and performance of all sales activities in the assigned territory (i.e. lead generation, cold calling, and appointment setting).
• Provide technical support such as troubleshooting, performance improvement and other request to customers.
• Engage in continual improvement, productivity and efficiency with customer by performing data and performance analysis, reporting and following up actions
• “Hands-on” servicing of accounts which includes but is not limited to; chemical testing, calibration and repair of chemical feed related equipment, and visual inspections of systems when necessary.
• Schedule service and sales calls – includes daily, weekly and monthly reporting
• Identify new business needs and opportunities, and develop and implement customized solutions for our customers

Requirements:

• Diploma Degree, or above. Preferred degree in engineering (chemical, environmental, biological, etc.) and sciences (biology, chemistry, etc.)
• Minimum of 3-5 years technical sales or field sales support work with a proven successful track record.
• Those with experience in water treatment, water hygiene, environmental health and safety, and/or secondary disinfection will be an added advantage.
• Possess great team work and demonstrated leadership, organizational, and management skill.
• Strong communication skills (both written and verbal) with experience working on teams from multiple locations.
• Knowledgeable in MS Office applications (Word, Excel and Outlook).
• MUST be Highly Motivated and a Self-Starter.
• Must be willing to work in chemical, noise and hot & cold environment.
• MUST be in good physical ability – the job requires frequent walking to and from worksite.
• Ability to work flexible schedule, some weekends required depending on the servicing of accounts

1) Proficiency in Precision Machining Programming using CAM Software

2) Design Jig and Fixtures for precision machining works.

3) Lead and organize the machinists and operators in daily CNC Machinery operations works

4) Responsible for daily Productivity and Quality improvement studies, plans and implementation.

5) Responsible for and take charge of 5S activities in housekeeping of workplace

Responsibilities:

• Perform geotechnical engineering design.
• Coordinate with clients, architects, consultants, and government authorities to ensure seamless project execution.
• Conduct site supervision activities.
• Analyze and review instrumentation monitoring data.
• Prepare detailed engineering reports.

Requirements:

• At least 3 years of experience in geotechnical engineering design and supervision.
• Proficient in using Plaxis 2D for analysis.
• Singaporeans ONLY.
• Knowledgeable in geotechnical analysis and design according to Euro Codes.
• Experienced in performing slope stability analysis.
• Skilled in designing temporary earth retention structures such as sheet piles, soldier piles, cofferdams, contiguous bored piles, and timber shoring.
• Understanding of various ground monitoring instruments and their principles.
• Familiar with local regulations on geotechnical work.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Software Engineer (Devices)

Responsibilities

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:

1. Requirements gathering;
2. Design and develop software applications for embedded devices.
3. Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
4. Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
5. Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.
6. Assist day-to-day application support issues.
7. Liaise with users on the requirementtesting and production issues.

The qualificationsrequired are as follows:

1. Recognised degree in Electrical / Electronic Engineering / Computer Science or a relevant discipline.
2. Been through at least one full Software Development Lifecycle.
3. Experience in writing Requirements Specification, Use Cases, Design Documentation, object-oriented software design and UML modelling.
4. Good knowledge and experience in C++ on Windows and/or Embedded (e.g. QNX, Vxworks, Linux, Java etc) platforms;
5. Experience in multi-threading, socket programming and serial communication.
6. At least 5 years' relevant experience in object-oriented software development.
7. Prior experience in following areas Scrum AGILE methodology process is a plus
8. Strong analytical and problem-solving skills.
9. Good written and verbal communication skills in English; and Self-motivated and a good team player.

Working location arrangement:

The candidate shall adhere to the company work arrangement to work in office and/or work from home.

JOB DESCRIPTION

* Design and develop Mechanical Equipment/Systems, keeping in mind budget, timelines and other essential resources.

* Work with a team of Engineers in the creation of new product designs, ensuring alignment with project objectives and timelines.

* Utilized CAD Software to create 3D Models and details drawings for new product development.

* Implemented design modifications and optimizations to streamlne the assembly process.

* Collaborate with cross functional teams including product management, manufacturing and quality assurance to ensure successful product development and launch.

* Troubleshoot problems and devise solutions to resolve them.

* Research and keep up with the Dynamic Technology and trends in the mechanical design spectrum.

REQUIREMENTS

* Degree in Mechanical Engineering.

* Knowledge in dealing with Engineering Drawings and 3D Modelling.

* Experience working with designing software - Solidworks and Autocad.

* Minimum 5 years of relevant working experience as Mechanical Design Engineer.

* Able to work independently with minimal supervision.

* Strong verbal, written and communicatin skills.

* Sound knowledge of Computer Application and Microsoft Office.

* Willing to work on weekends and travel occassionally if required.

Job Description

• Industry/ Organization Type: Manufacturing/ Production (Precision Engineering)
• Position Title: Procurement Engineer
• Working Location: Kaki Bukit
• Working Hours: 5 days (Mon – Fri, 8am – 5.30pm)
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Report to Operations Manager.
• Obtain quotations and purchase raw materials, components, and assign secondary processes to subcontractors.
• Update approved machining subcontractor quotations in the system.
• Issue and manage Work Orders and Purchase Orders.
• Source materials, components, and plating for cost reduction.
• Perform evaluations for company purchases and assist with assigned duties.
• Collaborate with the group sourcing team on procurement evaluations.
• Develop and manage the Supply Chain Management plan.

APPLY NOW!!!

• At least Diploma in Mechanical Engineering with 1 year of related working experience. Preferably from the Manufacturing industry.
• Proficient in Microsoft Office is a must.
• Experience with CRM tools (such as Salesforce) would be beneficial.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71172 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Responsibilities

• Study of construction drawings details and coordinate with the consultants and sub-contractors to resolve any technical/site issues.
• Ensure that works on site are carried out according to specications/drawings.
• Produce M&E coordination drawings and check drawings discrepancies.
• Carry out project planning, design, materials requisition, cost control, project supervision and documentation.
• Ensure quality of works is achieved and safety regulations are complied with.
• Conduct M&E meetings

Requirements

• Diploma/Degree in Mechanical / Electrical Engineering or equivalent.
• At least 3 years' working experience in the Building / Construction / Interior Design Industry.
• Proficient in MS Office applications
• AUTOCAD skill will be added advantage
• Able to converse with English and Chinese speaking clients, contractors and vendors to complete projects effectively.
• Strong Organizational, Project Management, and problem-solving skills.
• Capable of working independently with minimal supervision.
• Local working experience needed

Your resume must include the following information: -

1. Current and expected salary
2. Reasons for leaving
3. Date of availability

Other information

• Working hours: Monday to Friday, 9am to 6pm
• saturday 9am to 1pm
• Require to be reachable day and night
• Salary: $3,500 to $8,500

For interested parties, please send your resume to:

[email protected]

HAZARI ENGINEERING & RENOVATION PTE LTD

Whatsapp: +6580376525

We are looking for Software Engineer (Golang) to join one of the Government agency!

• Exciting opportunity to work with a team of professionals to deliver high quality application
• Great career progression and friendly working environment
• Attractive salary and employment benefits

What you will be working on:

• Mainly responsible for software design and development of web frontend and backend applications
• Write automated functional and unit testing for the code you write
• Develop backend APIs & databases supporting the applications
• Design and develop applications leveraging cloud technologies
• Assist DevOps Engineer on build and release automation
• Work closely with fellow developers in pair programming and code review
• Work closely with Business Analyst, Quality Engineer, User Interface/User Experience Designers

What we are looking for:

• Minimum 4-5 years of software development experience in web applications using Golang
• Experience in Reactjs/Typescript/Nodejs, preferably Golang
• Familiar with JavaScript unit testing frameworks such as Jest or Mocha

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui (Vivian) - R2090138

ScienTec Consulting Pte Ltd - 11C5781

Our client is a technology company that leverages advanced analytics and AI to optimize sales for brand owners on e-commerce platforms through their proprietary AI-driven automation technology.

• Regularly audit database indexes to identify and eliminate redundant or low-value entries.
• Enhance session and connection management to prevent prolonged connections and minimize resource bottlenecks.
• Work with cross-functional teams to refactor C# code for better system performance and scalability.

Requirements:

• Degree in Computer Science/Information Technology or equivalent
• At least 5 years of experience in database management and optimization
• Proficient in Azure SQL tools and SQL performance tuning.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the Wet Etch modules.

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

CRM dynamics Software Engineer |

You will be working with a team of dedicated & committed engineers for the development of healthcare application platform and solutions for the transformation of Singapore Healthcare IT landscape. Our mantra is to “work hard and have fun”, to deliver the next generation healthcare digital experience across whole of Singapore.

Role and Responsibilities:

· Responsible to do development for MS CRM Dynamics 365 for both On Cloud and On Premises deployments.

· Responsible for the development on Power Platform especially power apps.

· Responsible for making solution recommendations with pros and cons considering the MS CRM Dynamics and Power Platform.

· Responsible to integrate with other system using KingswaySoft and Web API.

· Responsible for packaging for deployment team over various Dynamics environments using CI / CD of Azure Cloud.

· Perform application/technical design documentation.

· Provide on-going application support and be involved in various stages of the SDLC

· Plan and coordinate end-user training for any system implementations or enhancements.

· Work effectively in a tight deadline, high pressure environment.

Requirements:

• 2 - 5 year’s working experience in programming using Microsoft and web technologies.
• Detailed knowledge of MS CRM Dynamics and Power Platform having developed at least 2 or 3 Applications using Dynamics best practices and design standards.
• Implementation of MS CRM Dynamics
  • Develop .Net (C#) Plugins.
  • Develop .Net assemblies for Custom Workflow.
  • Develop client-side Jscript (JQuery) for entity form events.
  • Develop using MS CRM SDK to implement customization.
  • Configuration of multi-disciplinary user roles
  • Deployment of configurations and customization including solution package for entities (Forms, Views, Charts and Dashboards), Plugins and custom workflows.
  • Data Migration
• Experience in Object Oriented Programming, .Net Web Applications, Web Technology (IIS), .Net framework 4.6.2 and above, C#, SQL and Stored procedure in MS SQL Server 2016 and Above
• Experience in application integration and / or web services integration required.
• Having a knowledge of various version controls repositories.

Interested candidates, please send your CVs on [email protected]

Regret to inform that only shortlisted candidates will be notified.

CEI: R1988671

EA License: 14C7275

Job Title

project control engineer

Occupation

PRODUCTION ENGINEERING CONSULTANT

Job Description & Requirements

Develop and update cost and resource loaded construction schedules. Establish and maintain harmonious client relationship to support project delivery and client satisfaction. Submit monthly reports to Project Manager and support internal reports preparation. Supervise planning, scheduling and cost engineering.

Key responsibilities:

• Review customers' regulatory requirements and conduct compliance review such as RoHS, REACH, Conflict Minerals, etc
• Work with Engineering to obtain BOM. Coordinate with SCM to gather regulatory declaration/ compliance letter from suppliers to ensure material used comply with regulatory requirements
• Review compliance verification on collected declarations and provide compliance letter to customers to ensure our products meets customer requirements.
• Gather compliance documentation on first buy / FA, review and file records.
• Perform updating on new compliances / changes, work with team on gathering declaration updates and filing records.
• Review and conduct regulatory documentation updating exercise every 2 years or upon customer's request.

Qualification and traits desired:

1. Minimum Diploma in Quality Management /Mechanical Engineering or equivalent
2. Possess Internal Quality Audit training certificate in ISO 13485 and 9001 will be advantageous
3. Minimum 2 years in Q, preferably with similar working experience in regulatory compliance.
4. Candidate must be proficient in Microsoft Office and preferably has performed Internal Quality Audit.
5. Excellent oral and written communication skills/good interpersonal skills

Other information:

• Working Hours : 8.15am to 5.30pm (Mon-Fri)
• Location : Changi North
• Company Bus : Pick up at Ang Mo Kio, Yishun, Hougang, Punggol, Pasir Ris, Bedok, Tampines MRT/Interchanges

Interested candidates are invited to apply online with an updated resume. Please indicate the below information in your resume:

• Education Background
• Work experience
• Current & Expected salary
• Reason(s) for leaving current/previous job
• Availability / Notice Period

Job Description:

• Review tender specifications / customers’ requirements and prepare process design.
• Obtain quotation from vendors, suppliers, and subcontractors based on the requirements.
• Interact closely with vendors to understand new technologies and effective implementation of customer applications using vendor’s information.
• Interact closely with customers on technical information and clarifications.
• Prepare cost effective costings.
• Prepare commercial & technical proposals with specifications for timely bid submissions.
• Generate / coordinate P&ID and General Arrangement drawings.
• Work with Business Development Manager to apply costing and process design strategies to increase probability of winning bids.
• Coordinate with Process / Mechanical / Electrical & Instrumentation Team for technical clarification support if required.
• Follow up with customers on submitted proposals and potential opportunities.
• Negotiate with vendors and customers if required.
• Upon award of projects, review and verify completeness of PO contract and compliance with agreed requirements.
• Communicate and nurture relationships with customers to drive more opportunities.

Requirements:

• Degree in Environmental or Chemical Engineering.
• Knowledge or previous experience in water treatment process and municipal wastewater treatment such as Filtration, UF, RO, EDI, SRU, MBBR, MBR etc.
• Knowledge and experience on pumps, motors, valves, piping, mechanical and electrical components for oil and gas industry is added advantage.
• Minimum 5 years of relevant experiences.
• Strong verbal and written communication skills in English.
• Ability to prioritize multiple tasks and work on own initiative.
• Willing to travel for site visits, sales presentation to customers and technical clarification meeting occasionally.