Responsibilities:

· Execute field service activities per Company procedures and general practices of safety and cost-effectiveness.

· Perform basic troubleshooting, running tests, fine-tuning, adjustments, and trimming related to running performance on equipment.

· Independently perform significant/complex repairs and complete overhauls.

· Perform warranty and commissioning activities, delivering the equipment to the customer or a shipyard.

· Perform internal and external progress status reports of assigned work.

· Participate in briefings and debriefing for each service mission

· Create Service Work Reports.

· Collect and organize time sheets and expense reports. Report and inform the back office as required.

· Ensure the work is executed according to Company Quality, Health, Safety, and Environmental guidelines and customer site procedures.

· Issue WeCare and Non-Conformance Reports when appropriate to ensure "lesson learned" from experiences gained at service missions

· Execute Client Survey after each job

· Supervise the tasks performed by Company employees and subcontractors.

· Advice and promote company products and solutions to customers.

· Participate in other department work as directed by the Line manager.

Requirements:

· Bachelor degree in Process, Automation, Mechanical, Marine, Electronics, or Mechatronic Engineering

· 3-5 years hands-on experience in process and electrical & Automation disciplines

· Knowledge or Experience in LPG/LNG/VOC/IG, Flare Gas systems, and Renewable & General Gas handling would be considered as advantage

Responsibilities and Tasks
• Provide engineering study is to include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, as well as code compliance.
• Maintain engineering data bases in support of capacity tracking, capital equipment facilitation, and cash flow project management for assigned systems/areas.
• Provide support for start-up of new equipment and ensure that all equipment will properly interface to other mechanical and electrical systems.
• Specify critical components for design projects and is responsible for assuring designs meet all applicable codes and regulations. The applicable code review and analysis utilizing (but not limited to): IFC, IBC, NEC, NFPA, FM, CGA and Semi standards. This requires continual review and analysis of new and existing equipment, applications, and technology.
• Perform engineering study on emerging facilities technologies to support cutting edge semiconductor processes.
• Participate in mid to long term infrastructure planning for facilities in support of the overall company plan.
• Work with in-house TGCM contractor and ensure chemical and Gas Delivery system running smoothly.
• Review and improve Operation and Maintenance SOP and RA.
• Respond to system issues. Perform Trouble Shooting with in-house TGCM contactors and OEMs.
• Verify all works done by Chemical and Gas section are in accordance with company safety guidelines;
ensure safety features are engineered into designs; and maintain good communication with other engineering disciplines and customers throughout the organization.
• All team members are required to complete their learning items within the stipulated time frame.

For business process and/or QMS component that one is responsible or accountable for:
a. ensuring the QMS/business process that is effective and conforms to requirements.
b. ensuring that the processes are delivering their intended outputs.
c. reporting on QMS/business process performance and opportunities for improvement to management.
d. ensuring the promotion of internal and external customer focus throughout the organization.
e. ensuring the maintenance of the integrity of the QMS/ business process when changes are planned and implemented.
f. ensuring customer requirements are met.

• Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws
and regulations.
• Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.
• Prepares bid sheets and contracts for construction and facilities acquisition.
• Reviews and estimates design costs including equipment, installation, labor, materials,preparation and other related costs.
• Inspects construction and installation progress for conformance to established drawings, specifications, and schedules.
• Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Education

• Bachelor’s degree in Chemical Engineering or equivalent discipline.

Skills, Knowledge and Abilities

• Good team work and collaboration

• Excellent communication and presentation skills

• Strong problem solving and analytical skills

• Independent and able to work on own initiative

• Good organizational skills and ability to prioritize and schedule workload

• Good knowledge of Microsoft Office

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Duties and Responsibilities

• Develop web application prototypes, new technologies and products.
• Build highly responsive and scalable web applications.
• Build fully functional web applications with interfaces to backend database, writing clean and maintainable code.
• Build fully functional, clear, testable backend RESTful/SOAP APIs with interfaces to backend database.
• Resolve defects, and generally ensure accuracy, integrity, interoperability and completeness of system.
• Build regularly automated tasks to perform functions specific to the project requirements.
• Build interfaces to exchange data between various third-party systems.
• Resolve defects, and generally ensure accuracy, integrity, inter-operability and completeness of system.
• Troubleshoot and debug to optimize performance.
• Prepare and deliver software related documentation.
• Provide timely updates to the web and backend application.
• Provide support and maintenance of existing software web application projects.
• Respond to users in a timely manner.
• Work with fellow software engineers to coordinate the development effort and ensure overall consistency in the coding and the interfacing between various components and sub-systems in order to achieve a full functioning solution.
• Work with consultants to craft user stories, assess feasibility and build demonstration showcases.
• Work with consultants and senior engineers to develop test scenarios to ensure full functionality of system before user acceptance test.
• Work with customers and partners, both internal and external where there will be collaboration for knowledge transfer.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Fresh graduate, or up to 2 years of relevant working experience
• Tech Stack Requirements: ASP.NET Framework 4.5 or .NET Core, C#, HTML, CSS, Javascript, SQL Server
• Good problem solving, logical reasoning, planning and time management skills
• Effective communication and technical writing skills
• Strong interest in software engineering
• Willingness to learn on the job, and constantly eager to learn new skills on one’s own
• Ability to work well in teams and also independently in a fast-paced environment
• Familiarity with mobile application development (with Xamarin) is a plus.
• Familiarity with backend API development (with .NET technologies) is a plus.
• Domain knowledge in accounting, or procurement, or inventory management, or leasing, or computerized maintenance management, or billing, or resource booking, or Enterprise Resource Planning is a plus

Only shortlisted candidates will be notified

Job Description:

1. Supplier Quality Management

• Develop and implement supplier quality management programs.
• Conduct regular audits and assessments of supplier facilities to ensure compliance with quality standards and regulatory requirements.
• Evaluate and approve new suppliers based on quality performance and capability assessments.

2. Quality Assurance and Control

• Establish and maintain incoming material inspection processes and criteria.
• Monitor and report on supplier performance, including quality metrics, delivery performance, and corrective actions.
• Work with suppliers to develop and implement corrective action plans to address quality issues.

3. Continuous Improvement

• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.

4. Collaboration and Communication

• Serve as the primary point of contact for all supplier-related quality issues.
• Work closely with internal teams, including engineering, production, and procurement, to address quality concerns and improve supplier relationships.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders.

5. Documentation and Compliance

• Ensure all supplier quality documentation is accurate, complete, and up-to-date.
• Maintain records of supplier audits, inspection results, and corrective actions.
• Ensure compliance with industry standards, customer requirements, and regulatory guidelines.

6. Training and Development

• Provide training and guidance to suppliers on quality standards, processes, and requirements.
• Mentor junior team members and support their professional development.

Job Requirements:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 7 years of experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong knowledge of semiconductor manufacturing processes and quality standards.
• Proven experience in conducting supplier audits and implementing corrective actions.
• Excellent problem-solving, analytical, and organizational skills.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers and internal teams.
• Preferred Skills: Certification in quality management (e.g., CQE, Six Sigma, Lean Manufacturing) is highly desirable.
• Proficiency in quality management tools and software.
• Experience with regulatory requirements and standards specific to the semiconductor industry.

ENGIE Services Singapore is a leading provider of Integrated Facilities Management solutions (IFM), property management, operations and maintenance, specialised rail engineering works, sustainable solutions and FM Consultancy services.

ENGIE understands the integrated role of facility management and the value of it can be expanded beyond the traditional approach. As a total FM, specialized engineering and sustainable real estate solutions service provider, ENGIE offers a comprehensive range of technical, digital and support services customisable to best suit your unique needs.

Responsibilities:

• Work closely with Technician & TO
• In Charge of Building Services, System Operation and maintenance on-site
• Responsible for the planning and execution of corrective/preventive maintenance program
• Liaising with OEM / system contractor for all Building Services / Civil works.
• Improving the efficiency on the operational processes, innovating and implementing systems improvement on energy conservation.
• To provide excellent service to client expectations.
• To achieve effective, economic and safe operations of all Building Services' equipment and system by the team of technical officers and technicians
• Providing feasible solutions and coordinate with owners/users, consultants, vendors/contractors on engineering functional requirements and ensure the objectives are achieved.
• Conduct regular inspection of existing building and its services to ensure that all maintenance programmes are implemented effectively in strict compliance with instructions and guidelines.
• To ensure all works carried out safely and / or in accordance with safety procedures.
• Provide training and guidance to team of Technical Officers and/or Technicians
• Any other tasks, when required by Facilities Manager.

Requirement:

• Bachelor's Degree in Civil Engineering, Mechanical Engineering, Building Technology, Property Management, Facilities management or Building related disciplines.
• Experience in building finishing works.
• Familiar with procedures for statutory submissions such as FSSD, M&E RI, Architectural RI, 5 Yearly Structural Inspections.
• Experience in supervision and project management of A&A works.
• General knowledge of M&E building services.
• Able to guide and troubleshoot Building Services / Civil faults.
• Minimum 3 years of hands-on experience in Building Trade.
• Experience in Plumbing and Sanitary preferred.
• Able to communicate & write in English
• A good team leader.
• Has a good safety mindset and displays good WSH behaviour

Job Description

• Industry/ Organization Type: Manufacturing/ Production (Precision Engineering)
• Position Title: Procurement Engineer
• Working Location: Kaki Bukit
• Working Hours: 5 days (Mon – Fri, 8am – 5.30pm)
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Report to Operations Manager.
• Obtain quotations and purchase raw materials, components, and assign secondary processes to subcontractors.
• Update approved machining subcontractor quotations in the system.
• Issue and manage Work Orders and Purchase Orders.
• Source materials, components, and plating for cost reduction.
• Perform evaluations for company purchases and assist with assigned duties.
• Collaborate with the group sourcing team on procurement evaluations.
• Develop and manage the Supply Chain Management plan.

APPLY NOW!!!

• At least Diploma in Mechanical Engineering with 1 year of related working experience. Preferably from the Manufacturing industry.
• Proficient in Microsoft Office is a must.
• Experience with CRM tools (such as Salesforce) would be beneficial.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71172 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Electrical Engineer
• Working Location: Central
• Working Hours: 5 days (Monday to Friday 9 AM – 6 PM)
• Salary Package: Basic Salary up to $4,000 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Design, develop, and test electrical systems and components for various projects.
• Prepare and interpret electrical schematics, blueprints, and technical specifications.
• Collaborate with cross-functional teams, including project managers, mechanical engineers, and contractors, to ensure project goals are met.
• Perform calculations to ensure safe and efficient electrical system designs.
• Prepare and maintain documentation such as design specifications, project plans, and reports.
• Ensure all electrical engineering projects comply with relevant industry standards and regulations.
• Identify and resolve technical issues promptly to prevent project delays.
• Conduct regular inspections and testing of electrical systems to ensure optimal performance and safety.
• Participate in continuous improvement initiatives to enhance project efficiency and quality.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• NITEC/Diploma in Electrical Engineering or equivalent
• Minimum 1 year of working experience in an Electrical Engineering role

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67299 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Civil Engineering Firm
• Position Title: C&S Engineer
• Working Location: Lavender (near MRT)
• Working Hours: 5 Days, Mon – Fri (8.30am – 6pm)
• Salary Package: Basic Salary + Annual Bonus
• Duration: Permanent

Key Responsibilities

• Perform civil and structural analysis, design development, and impact assessments.
• Oversee the planning, design, and coordination of civil engineering and infrastructure-related designs, as well as site works.
• Ensure that all engineering activities adhere to the relevant statutory requirements, regulations, and industry standards.
• Act as the main point of contact, maintaining communication between project stakeholders, clients, consultants, contractors, and relevant authorities.
• Support the Team Leader in ensuring that design and supervisory work meet high-quality standards.
• Other tasks as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Civil Engineering or equivalent. (Preferably recognized by PEB)
• At least 1 year of design experience in civil engineering projects in consulting firm.
• Good knowledge of authorities’ submission requirements for civil and infrastructure projects is required.
• Familiarity with ground improvement works, civil and structural design, and BIM is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70252 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Purpose

To design, develop, implement and support Cloud Native applications offering IAM services to internal and external customers.

The Job

· Work with team to develop and support cloud native applications that are providing IAM services to the organization.

· Perform day-to-day operations, support, patching and IAM administration

· Function as level 3, supporting incidents

· Involve in all the project and activities related to IAM including preparation of technical presentation with Business and IT stakeholders

· Maintain the completeness of all technical and architectural documentations and ensure that they are updated

· Keep abreast of latest technologies, techniques, tools, best practices and concepts, and apply them where applicable, and contribute to the overall knowledge of the company in cloud native application development.

· Be the subject matter expert on cloud native application development, and micro-service design concepts, and the ability to articulate ideas and communicating clearly to a group of audience on these topics.

· Required to perform code reviews of co-developers and possess ability to identify issues/gaps against the design specifications.

· Ability to work independently, as well as in a team of PM, BA, architects and engineers, and liaise with vendors on design and implementation activities.

· Contribute to all phases of the software development lifecycle, and support all BAU activities where applicable.

· Be aware of company’s architectural and technological strategies and to develop applications that are aligned to these directions.

· Ability to evaluate, weigh the pros and cons, and exercise good judgement when making decisions.

· Takes accountability in considering business and regulatory compliance risks and takes appropriate steps to mitigate the risks.

· Maintains awareness of industry trends on regulatory compliance, emerging threats and technologies in order to understand the risk and better safeguard the company.

· Highlights any potential concerns /risks and proactively shares best risk management practices.

Our Requirements

· Minimum of 7 years of development experience

· Minimum of 4 years of experience in developing cloud native applications

· Must have strong hands-on development experience with UI framework and design with Java Scripts, Spring Framework, JQuery, NodeJS, Angular, Vue JS, React Js and not limited to.

· Experience in UI integration with backend REST, SOAP, web services and/or other web protocols for frontend business application.

· Experience in developing and implementing of enterprise level web application or customer portal related application.

· Experience in developing event driven microservices based on Kafka or similar framework.

· Experience in TDD approach in software development.

· Experience in developing cloud native applications, utilising PaaS or CaaS platform, and on technologies like Kubernetes, VMware TKGI and VMware TAS.

· Experience in using source control like BitBucket, and branching strategy.

· Experience in both Waterfall and Agile development methodology.

· Experience working in a DevOps environment.

· Experience in using team collaboration tools like Jira and Confluence.

· Knowledge in micro service concepts like service registry, circuit breaker, inter-service process communication.

· Knowledge in CI/CD and its toolchain.

· Knowledge of web and application vulnerability, native apps security, authentication mechanism, session management, Oauth & Open ID token-based authentication protocol, SAML2.0 application-level encryption, PKI, application signing, cross-site scripting, and OWASP.

· Good to have domain knowledge in the Insurance or Financial industry.

· High level of integrity, takes accountability of work and good attitude over teamwork.

· Takes initiative to improve current state of things and adaptable to embrace new changes.

To all recruitment agencies: Great Eastern does not accept unsolicited agency resumes. Please do not forward resumes to our email or our employees. We will not be responsible for any fees related to unsolicited resumes.

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Mechanical Service Engineer/Mechanical Engineer
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9 am – 5.30 pm (One Saturday per month, 9 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Perform engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.
• Conduct other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.
• Provide a service report with necessary recommendations & findings.
• Provide technical support for site engineers and customers whenever necessary.

APPLY NOW!!!

• Entry-level candidates with Higher Nitec, Diploma or Degree in Mechanical Engineering.
• Able to read and understand basic Mechanical diagrams.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66137 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Engineering (Marine Industry)
• Position Title: Mechanical Engineer
• Working Location: Gul Circle
• Working Hours: 5 days (Mon to Thurs 8 am to 6 pm, Fri 8 am to 5 pm)
• Salary Package: Basic Salary up to $5,000 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Follow up on projects from start to finish, including quotation, on-site work, invoicing, and service report.
• Lead technician teams through projects.
• Independently execute engine repairs and overhauls on board and on site.
• Dismantle, repair, replace, and reassemble mechanical parts.
• Troubleshoot and recommend repair solutions for machinery breakdowns.
• Conduct daily toolbox meetings with teams, ensuring safe work practices.
• Complete repairs, maintenance, and overhauls on time.
• Deliver high-quality services to satisfy customers.
• Prepare quotations for new inquiries and manage job costs within budget.
• Prepare service reports after project completion.
• Plan job methods and work schedules.
• Communicate with customers to ensure smooth project completion.
• Coordinate with local or overseas agents for job deployment and preparation.

APPLY NOW!!!

• Diploma or Degree in Marine/Mechanical Engineering or equivalent
• At least 3 years of ship repair experience in Singapore
• Able to work with tight schedules to accommodate ship arrival times
• Willing to perform hands-on mechanical repairs, installations, and removals
• Willing to work on-site, on board vessels, and in workshops with occasional irregular hours

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67187 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Your Job

Molex Singapore is seeking for a Process Outsource Engineer to support production process improvements for subcontractors outside Molex Singapore, ensuring quality, yield, and productivity enhancements. You will be responsible for the smooth release of new products to manufacturing, resolving process-related issues, and tracking assets.

Our Team

This role involves extensive collaboration with various internal departments, subcontractors, fabrication vendors, and machine vendors/suppliers.

What You Will Do

• Develop and continuously improve the sub-con quality system to meet agreed goals.
• Monitor project deadlines and budgetary expenditures.
• Collaborate with Sub-Con, Product Design, QA, and Components Engineers to ensure new product release for manufacturing, including full qualification.
• Implement productivity, quality, and cost reduction programs, as well as machine and process improvements.
• Address and resolve quality and process-related issues at sub-cons for assigned products.
• Provide production support to resolve sub-con quality/process problems.
• Manage product capacity expansion, including duplicating machines/fixtures if necessary.
• Qualify all tooling releases to manufacturing at sub-con.
• Maintain proper documentation control for process capability studies, process FMEA, SOPs, process specifications, OJT task analyses, training records, production records, and assets.
• Oversee equipment transfers from in-house to sub-con, ensuring machine setup and production qualification.
• Provide coaching and supervision for new engineers.

Who You Are (Basic Qualifications)

• Degree or Diploma in Mechanical, Manufacturing, or Production Engineering.
• Minimum of 4 years of experience in a similar position (for external candidates) or a minimum of 2 years in a Process Engineer position at Molex (for internal candidates).
• Proficient in process improvement.
• Knowledge of quality systems.
• Ability to identify and propose solutions for directional errors.

What Will Put You Ahead

• Ability to work effectively in a team environment.
• Willingness to take on challenges and demonstrate initiative.
• Six Sigma certification

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

You will be responsible for the design and development of new high-speed custom automation. You will lead the machine development process and guide the activities of tooling design engineers, overseeing the machine lifecycle from quoting to mechanical design and delivery scheduling.

Our Team

You will collaborate closely with the Mass Production, Quality, Product Design, Tooling Design, and Machine Build Teams. This position is part of the DSS Manufacturing Services division and focuses on automation shop activities, design, and project management.

What You Will Do

• Provides assembly feasibility (Design for Manufacturability) and equipment cost estimates to the new product development team.
• Works with engineering department to determine design complete dates. Prioritizes work and delegates work assignments to designer engineers.
• Designs new connector and cable manufacturing machinery utilizing the Siemens NX CAD software.
• Assists in developing and executing the machine qualification plan.
• · Provides technical support for the launch of equipment produced by the LR-Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and developing re-tooling strategies.
• Attends Design Reviews and PFMEA’s while working with design engineers to improve current and future designs of automation.
• Tracks projects using internal methods for summarizing component cost, labor, and leadtime. Develops accurate, up-to-date BOM’s and Spare Tooling Lists
• Understands, supports, and contributes to complete projects according to internal product development procedures, TQM and IS/QS-9000 requirements. Embraces Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Performs other related duties as assigned by management.
• International Travel: Up to 20% per year.

Who You Are (Basic Qualifications)

• Bachelor's degree in Mechanical Engineering.
• 5+ years of mechanical design experience.
• 3+ years of project management experience.
• Proficiency in Siemens NX or a comparable 3D CAD package.
• Experience with high-speed synchronous, asynchronous, and flexible (robotics) assembly systems.

What Will Put You Ahead

• PMP Project Management Certificate along with a Bachelor's degree in Mechanical Engineering.
• Knowledge of machine building techniques.
• Experience in scheduling and budgeting.
• Design experience with electrical connectors or cable assemblies and/or automotive assemblies.
• Mechanical cam/linkage analysis experience and toolmaking knowledge.
• Familiarity with mechanical and electrical systems design standards and machine wiring & industrial electrical logic.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Responsibilities:

• Responsible for smooth and safe operations of the facility and including the the steam system and auxillaries operations.
• Responsible for the operating status of plant by observing control system parameters, BMS, distributed control systems of the facility and including the the steam system and auxillaries operations
• Conduct regular field inspections of plant, stations, or subsystems and equipment to ensure normal and safe operating conditions
• Supervise and lead the boiler and plant operators to operate treatment processes according to process parameters and emission limits compliance
• Identify plant optimization points and support the implement of the approved tasks by the site manager.
• Propose, append, develop and implement Standard Operating Procedures on plant operations and regular maintenance of the plant with the support of operations and maintenance team.
• Analyse, interpret and report on steam operations data and plant performance on periodic and timely basis;
• Recover plant process upsets, equipment malfunctions
• Conducting regualr inspection and testing of equipment to ensure it is safe and operating efficiently.
• Ensure and followup on the CMMS for logs of maintenance activities and repair procedures to ensure safe operation of equipment
• Inspecting facilities for hazards such as leaks, corrosion, or exposure to extreme temperatures
• Monitoring steam pressure and temperature levels to ensure safe operating conditions
• Consulting with management to provide advice on how to improve efficiency of processes or reduce operating costs
• Management and compliance of Workplace Health and Safety Act
• Other tasks assigned by the site manager

Requirements:

• Registered Class 2 Steam Engineer with MOM
• Familiar with FMEA, HAZAOP and Job Hazard Analysis methodologies
• Good interpersonal, management and decision-making skills
• Strong innovative and analytical skills and problem-solving skills
• A registered First-Aider Certification is an added advantage

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/Organization Type: Design & Manufacture of Material Handling Systems
• Position Title: Sales Engineer
• Working Location: Gul Circle (Transportation provided)
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $5,000 + HP Allowance + Incentive
• Duration: Permanent

Key Responsibilities

• Conduct customer visits, managing the full sales cycle from prospecting through to follow-up, utilizing sales leads, cold calls, etc.
• Develop and refine sales strategies for targeted customers to drive revenue growth and increase market share.
• Foster and maintain robust business relationships with both new and current clients, ensuring prospective and ongoing satisfaction with products and services offered.
• Deliver exceptional levels of customer service, ensuring clients' needs and expectations are met or exceeded.
• Provide comprehensive technical presentations and product demonstrations that clearly articulate the features, advantages, and benefits of our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or with at least 2 years of relevant experience.
• Experience in equipment sales or related field would be advantageous.
• Candidates without experience are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66217 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing – Fabrication
• Position Title: Sales Engineer /Assistant Sales Engineer
• Working Location: Tuas, 5 min from MRT
• Working Hours: Monday - Friday (8:30 AM-5:30 PM)
• Salary: Up to $4500 (Basic) + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Achieve growth and sales targets.
• Build and maintain customer relationships.
• Understand and manage customer needs.
• Communicate customer’s requirements effectively to internal team.
• Prepare and present quotations.
• Lead and support operations team for customer’s prototype/sample build to mass production.
• Order entry, planning and monitoring of delivery schedule and commitments to customers.
• Collaborate with raw material suppliers.
• Plan sales and materials based on customer forecasts.
• Participate in monthly stock takes to optimize inventory turnover.
• Other ad-hoc duties that may be assigned.

APPLY NOW!!!

• Background in Engineering, Manufacturing, or a relevant technical field.
• Experience in engineering sales/customer service is a plus.
• Strong marketing and business skills.
• Proficiency in Mandarin to liaise with Mandarin-speaking clients and suppliers.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67170 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

As a Product Development Engineer, the Non-Volatile Engineering (NVE) Product Engineering organization at Micron Technology, Inc., you will be part of a brilliant team of engineers that solves complex problems. You will be responsible for enabling Micron’s NAND products with seamless and issue free release to both internal and external non-volatile system customers.

Key Responsibilities :

• Design novel test algorithms and develop test programs for validating NAND features and commands
• Study the latest RG NAND designs, with focus on customer mode operations
• Use high-speed tester hardware to perform functional and design validation of new NAND devices
• Perform Electrical Failure Analysis during the evaluations, and investigate root causes of reported device issues
• Make use of Verilog/Synopsis VCS for simulation study and analysis
• Involvement in high-speed fail debug
• Collaborate with NAND Design, Application Engineering, Product and System teams to drive closure of device issues
• Develop and optimize deterministic usage case flow and Random Sequence Generator for validation purpose
• Automation of program development and work processes using scripting

Requirements:

• Degree in Electrical and Electronics Engineering / Computer Engineering with 1-3 years’ relevant experience in NAND related product and/or test program development
• Software development proficiency (e.g. C-based programming) and scripting (e.g. Perl, Python)
• Simulation software know-how (e.g. Verilog, Synopsis VCS)
• Excellent problem solving and analytical skills
• Good multitasking and organizational skills
• Strong presentation skills Self-motivation and enthusiasm
• Effective communication skills in written and spoken English

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781