Job Responsibilities:

• To be involved in the planning and execution of civil and structural engineering works.
• Assist Management in monitoring and managing the day-to-day operation of the projects.
• To prepare method of statement, construction sequencing, sketches, and other technical submissions.
• To monitor the execution of the site works. To review and further develop the method and/or sequence of the works to ensure safety and efficiency.
• To assist in the preparation of RA/SWP and other safety documents.
• To collaborate with peers, and to liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare Inspection and Test Plan, and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification and submit technical clarification to the clients and consultants. Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Prepare site record and submit to office in a timely manner.
• Undertake ad-hoc duties as assigned by the management.

Requirements:

• Candidate must possess at least a bachelor’s degree in engineering (Civil) or equivalent from a recognized University accredited with the Professional Engineers Board, Singapore.
• Preferably with design, consulting experience and Improvement works to Surface Car Parks.
• Conversant with Eurocode or Local codes and regulations as well as submission procedures.
• Well knowledge in CAD, BIM and other Civil Engineering software is necessary.
• Good project management and ability to work independently and under pressure to meet tight schedules.
• Proficient in MS office applications and keen to learn new things.
• Good communication skills and able to interact with people of all levels and teamwork.
• Candidates with more years of experience may be considered for a senior role.

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology

Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.

Job Summary:
We are looking for a highly skilled AI Chip Processor Core Verification Engineer to design, verify, and enhance AI processor cores. This specialized role demands deep expertise in hardware verification to ensure the functionality, efficiency, and performance of AI chips through systematic test planning and execution.

Key Responsibilities:

• Testplan Development & Verification:
  Develop comprehensive test plans, create and manage testbenches, and ensure thorough testing by analyzing code/functional coverage. Prepare detailed verification reports.
• Gate-Level Simulation:
  Conduct gate-level simulations to validate chip designs, generating and presenting simulation reports.
• Efficiency Improvement:
  Write and refine scripts (in Shell/Python) to automate tasks and enhance the verification workflow, improving overall efficiency.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Proficiency in UVM (Universal Verification Methodology) for testbench development.
  • Hands-on experience with Shell and Python scripting for verification tasks.
• Soft Skills:
  • Strong interpersonal and communication skills to work collaboratively with cross-functional teams.

Job Description

• Designs of electrical engineering service for building projects, and knowledge of mechanical engineering services
• Prepare tender documents, call tenders, evaluate tender returns and recommend tender awards
• Project management, coordination, supervisions, testing and commissioning for installations of mechanical and electrical engineering services during construction phases. This includes reviewing shop drawings, progress claims and variation claims.
• Engage in discussions with relevant authorities for preparations and submissions of plans
• Attend meetings with clients, contractors and suppliers
• Manage project through defined project scopes, detailed project plans & seek client’s agreements for sign-off
• Track project status and provide regular updates to ensure projects are on tracks
• Any other works as may be directed due to specific requirement of the projects

Job Requirements

• Bachelor's Degree in Electrical Engineering or related fields
• Preferably 1 to 5 years of working experience in designs, supervisions and implementation
• Experience in engineering consultancy or construction industry would be an added advantage
• Able to multi-task and work in fast-paced environment

As an EUV Photo Project Engineer in Operation Central Team (OCT) Central Process and Equipment Engineering (CPEE) Photo Scanner at Micron Technology, Inc., you will lead project activities to achieve and maintain outstanding EUV Ecosystem in high volume manufacturing.

You will be responsible for providing leadership to the global Micron network to drive Photo EUV Productivity, Hardware, Application, Value Engineering, Continuous Improvement Program, Cost reduction, TOR and BKM governance through technical expertise, business process management and project execution.
You'll be working closely with various teams like Process Equipment Engineering Groups, Technology Development, Procurement, and the Central Team, as well as interacting with equipment suppliers to address manufacturing issues. Effective collaboration with manufacturing sites, Quality Engineering, and other functional departments is key, with an exciting element of international travel to achieve your goals.
It’s a great opportunity for someone who enjoys challenges in State of Art Technology in EUV, teamwork and global experiences!

Responsibilities:

• Ensure a safety-first culture for all program and project solutions.
• Oversee the EUV Litho Cluster, including Scanner and Track installation, to meet TIQ (Tool Installation Qualification) goals.
• Close collaboration with EUV ecosystem suppliers (ASML, TEL, Edward Zenith, Zinter, etc) and internal partners (HVM fabs, Central Teams, Technology Development teams).
• Manage EUV Reticle support tools (e.g., Reticle inspection tools, Reticle Clean tools, EUV Reticle pod storage, Pod Clean tools etc) through closed collaboration with Fab and Central Reticle Teams.
• Drive EUV Industrialization goals by leading Supplier Workstream Programs (Eg: Scanner, Source, Drive Laser, TEL Track etc) to achieve industry outstanding performance in Imaging, Overlay, Rework, Defectivity, and Efficiency (Wafers Per Day).
• Drive and facilitate Governance meetings and cross-collaboration projects with internal and external partners to achieve Micron Strategic Initiatives (Eg: cost, yield, quality, Maxout, environmental sustainability).
• Demonstrate strong communication and reporting skills to provide regular Executive updates on project progress, challenges, and escalation for resource support.
• Oversee processes, guide initiatives, and lead project team members toward goal achievement using analytical skills and problem-solving techniques.
• Proactively identify bottlenecks, drive improvements, and share standard methodologies across HVM fabs.
• Demonstrate ownership and accountability in delivering results.

Requirements:

• Global Factory Network Expertise: Demonstrated understanding of worldwide high-volume manufacturing network operations across different geographical region.
• Leadership and Strategic Initiatives: Proven ability in team development and leading transformative initiatives.
• Manufacturing Knowledge: Familiarity with Front End (FE) manufacturing, reticle manufacturing, and fab processes.
• Project/Resource Management: Ability to manage Global Project and Resource.
• Effective Communication: Skilled at communicating effectively across various organizational levels.
• Customer-Focused Project Management: Proficient in project management with a strong customer focus.
• Continuous Learning Advocate: Continuous learning on the job and provide technical mentoring for peers.
• Minimum 4 years’ experience working as Photolithography Equipment/ Process Engineer or Photo Scanner Engineer in Wafer Fab. ASML EUV Scanner experience will be an advantage
• Bachelors/master’s degree in Electrical, Electronics, Mechanical Engineering

You will be responsible for providing leadership to the global Micron network to drive Photo EUV Productivity, Hardware, Application, Value Engineering, Continuous Improvement Program, Cost reduction, TOR and BKM governance through technical expertise, business process management and project execution.
You'll be working closely with various teams like Process Equipment Engineering Groups, Technology Development, Procurement, and the Central Team, as well as interacting with equipment suppliers to address manufacturing issues. Effective collaboration with manufacturing sites, Quality Engineering, and other functional departments is key, with an exciting element of international travel to achieve your goals.
It’s a great opportunity for someone who enjoys challenges in State of Art Technology in EUV, teamwork and global experiences!

• Oversee and manage the day-to-day operations of UAT environments
• Offer technical support to software development teams for application and testing needs
• Assist project management teams in various project-related tasks and activities
• Manage and maintain Windows and Linux server environments, ensuring optimal performance and security
• Perform infrastructure setup and deployment tasks for application environments, including configuration, provisioning, and deployment
• Handle account management activities, creating, modifying, and deleting user accounts and permissions
• Develop and maintain comprehensive documentation for application processes and procedures, including user guides, technical manuals, and standard operating procedures

Requirements:

Minimum 2 years of software development, testing, and support experience.

Strong proficiency in

• Database query languages (Oracle/MSSQL)
• SSH/SFTP client/server operations
• Public/private key and certificate management
• IIS web server administration, including certificate generation
• Linux server OS administration and command-line proficiency
• MSMQ messaging services
• Collaborative and independent software/IT project work

Strong proficiency in scripting for the following:

• PowerShell (Must Have).
• Windows Batch scripting (Must Have).
• VB scripting (good to have).

Additional Info:

• Company Location: East Side

To apply, please visit www.gmprecruit.com and search for Job Reference: 25029

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

We are seeking a highly skilled and innovative Executive Engineer, Mechanical to join our dynamic team in Singapore, Singapore. In this role, you will be responsible for designing and implementing cutting-edge mechanical engineering solutions for various building and infrastructure projects.

• Design and perform calculations for mechanical engineering works, including ACMV, fire protection systems, plumbing, and sanitary systems
• Conduct technical feasibility studies, life cycle analyses, and planning for building engineering projects
• Develop comprehensive study reports, design reports, and technical specifications for mechanical engineering projects
• Prepare detailed tender documents and evaluate proposals, providing thorough assessment reports
• Collaborate with cross-functional teams to ensure project goals are met efficiently and effectively
• Provide support in project management and contract administration for building engineering contracts
• Implement innovative mechanical engineering solutions while staying up-to-date with industry trends
• Troubleshoot and resolve complex mechanical engineering issues as they arise
• Mentor junior engineers and contribute to the overall growth of the engineering team
• Ensure compliance with industry standards and regulations in all project phases

Software Engineer (SAP Specialist)

Responsibilities:

• Provide SAP Techno-functional Support in FI/CO or SD/MM/PM modules.
• Involve in analysis, design, coding / configuration and testing of SAP System.
• Work with business users to understand their business requirements
• Develop interfaces between SAP with external systems.
• Analyse the software issues, diagnoses the technical faults and suggest the precaution measures along with accurate troubleshooting methodologies
• Ensure safety practices and housekeeping is to be maintained to the highest standard

Requirements:

• Possess a Diploma/Degree in Computer Science / Information Technology or equivalent
• Knowledgeable in SAP and programming languages such as ABAP.
• Good interpersonal, analytical and problem-solving skills
• Minimum 2-3 years of relevant working experience is required

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• Evaluate the potential consequences of changes to upstream and downstream systems.
• Develop and maintain programs (shell scripts, SQL scripts) adhering to coding standards and best practices.
• Follow the organization's SDLC processes, creating and updating relevant documentation.
• Participate in system design, review, and improvement, ensuring security and performance.
• Diagnose, troubleshoot, and resolve production issues, implementing both short-term and long-term solutions.
• Perform routine maintenance tasks, including disaster recovery drills and software updates.
• Provide ad-hoc support, data analysis, and troubleshooting to users.
• Manage, maintain, and optimize applications to meet service level expectations.
• Identify and implement improvements to enhance system performance and functionality.
• Coordinate and support production releases, including on-call and after-hours support.
• Proactively identify, assess, and escalate potential risks and issues.

Requirements:

• Hold a master’s or bachelor’s degree in Information Technology, Computer Science, Management Information Systems, Banking and Finance, or a related field.
• Have a minimum of 2 years of experience in MS SQL Server development, including work on SSIS packages, stored procedures, functions, and triggers.
• Demonstrate familiarity with the Software Development Life Cycle (SDLC) process.
• Exhibit strong problem-solving skills and thrive in a dynamic technical environment, with the ability to multitask and deliver high-quality solutions.
• Possess a comprehensive understanding of database management systems.

To apply, please visit www.gmprecruit.com and search for Job Reference: 25015

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

About us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

We are looking for an Application Support Engineer to join our exciting team, to play a pivotal role in our banking technology division, responsible for ensuring the reliability, performance, and availability of critical banking applications.

Responsibilities

• Oversee the bank’s portfolio of applications, ensuring their stability, availability, and performance.
• Hands-on work on technical issue troubleshooting and ensure application functionality.
• Participate in the planning and execution of application upgrades and enhancements.
• Monitor system performance, track incidents, and proactively address potential issues.
• Ensure compliance with regulatory and security requirements for banking application.
• Continuously work towards making improvements in the release process.
• Provide regular reports on application support metrics and key performance indicators (KPIs).
• Support project team on DEV, SIT and UAT environment deployment and troubleshooting.
• Familiar with ITIL based Bank IT process, especially on incident, problem and change management.

Requirements

• Bachelor’s degree in computer science, Computer Engineering, Electrical Engineering, or related fields.
• 3 years of Technical/Application Support experience on multi technology platforms.
• Good knowledge on Linux OS, Windows Server, PostgreSQL, SQL Server, Oracle.
• Cross-platform experience and the expertise to identify and resolve integration issues.
• Excellent understanding of the CI/CD practice.
• Familiar with application release methodology.
• Experience in software development lifecycle and agile development methodologies.
• Experience working in a financial services institution with understanding of MAS technology risk requirements.
• Highly self-motivated to excel in assigned tasks and to deliver results for a digital bank.
• Good communication and coordination skills.
• Hands-on development experience is a plus.
• Excited to work in a fast-paced environment.

Responsibilities:

• Customises CMS database checksheets and allocation of checksheets based on latest engineering drawing revisions and punchlist updates for mechanical/ process/safety /HVAC discipline
• Prepares boundary drawings as per subsystem listing
• Prepares procedures/ work method statements and risk assessment for mechanical/ process/ safety/ HVAC commissioning activities
• Attends Factory Acceptance Test at vendors' premises, as required
• Leads a team of mechanical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides
• Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability
• Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities
• Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner
• Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities, etc
• Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc
• Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures
• Reviews completed commissioning documentation such as checksheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.
• Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

Requirements:

• Min. 5 years years of commissioning experience in the Oil & Gas/ Wind Farm industty
• Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc
• Good knowledge and experience in commissioning activities of oil and gas/ wind farm facilities
• Familiar with permit-to-work systems and lock-out tag-out procedures
• Good analytical, problem solving and planning skills.
• Familiar with Project Specifications, Technical and HSE Standards
• Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.
• Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Amiralty Yard)

60 Admiralty Road West, Singapore 759947

(Tuas Yard)

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing smart city solutions through advanced techology. They are well-known for their dedication of quality smart utilities to their esteemed clients. They are looking out for an Electrical Engineer to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area (project location at East side)

Job Responsibilities:

• Supervising/ monitoring of sub-contractors work and ensuring safety practices are followed.
• Discuss with PM/HOD for site problems and technical difficulties.
• Liaise with affiliated parties for smooth execution of work on site.
• Material tracking to ensure sufficient materials are readily available for installation.
• Carry out inspections of incoming materials and equipment deployed to work site.
• Conduct quality checks of sub-contractor/ vendor works daily.
• Handle site inspection with client/main contractors representatives and updates site installation progress.
• Update drafter on site changes and as-built drawings.
• Arrange and obtain for permit to work before execution of site.
• Ensure all project documentation are properly kept and filed.

Requirements:

• At least 1 - 2 years’ Assistant/Electrical Engineer experience
• Proficient in the understanding of MEP/ construction drawings
• Education qualification in Electrical Engineering or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

• Design, develop, implement, and maintain software systems.
• Collaborate with team leads to understand client needs, assess technical implications, and estimate project timelines.
• Create, update, and review technical documentation.
• Oversee offshore teams, ensuring adherence to quality standards and technical guidelines.
• Review code for potential issues, conduct unit and integration testing, and support user acceptance testing.
• Develop deployment strategies, support production environments, troubleshoot issues, and implement corrective actions.
• Perform other tasks as assigned.

Job Requirements:

• Bachelor's degree in Computer Science or Information Technology with at least 5 years of software development experience using Java (J2EE, Spring Framework) and frontend technologies (JavaScript, Angular, AngularJS), preferably in a banking or financial setting.
• Experience working with offshore teams.
• Hands-on experience with deploying and managing cloud-native Java applications on Microsoft Azure.
• Knowledge of the Newgen BPM system.
• Strong understanding of software development life cycle methodologies, including Waterfall and Agile.
• Excellent communication, presentation, and interpersonal skills.
• Self-motivated, proactive, and able to work independently or as part of a team. Demonstrates a strong sense of responsibility and ownership.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24991

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

We are looking for a skilled IT Security Engineer to join our client for a 1-year direct contract. The successful candidate will bring strong expertise in information security and hands-on experience managing security projects from start to finish.

Responsibilities:

• Lead and execute security projects across various domains, including endpoint, network, and application security.
• Implement and manage security tools, such as Web Proxy, Endpoint Protection, Email Security, and Vulnerability Scanners.
• Assess system security through threat modeling and propose effective solutions.
• Explore and integrate emerging security technologies to strengthen the organization’s security posture.
• Collaborate with teams to ensure secure deployment and operation of cloud environments.

Requirements:

• Bachelor’s degree in Computer Science, Computer Engineering, Information Security, or a related field.
• 5 years experience in IT Security, with deep expertise in one or more security domains.
• 3 years hands-on experience in end-to-end IT security projects or project delivery.
• Familiarity with security tools and frameworks.
• Security certifications (CISSP, CISM, AWS Certified Security, etc.) are highly desirable.
• Experience with cloud security is an added advantage.
• Thrives in fast-paced and demanding environments.

This role is a great opportunity to work on impactful security projects in a dynamic environment.

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job Description

• To act as Resident Engineer for underground MRT station
• Supervise and ensure strict quality control
• Review Technical Documents
• Keep record of all site activities and prepare daily report
• Supervise any repair works
• Witness & verify any field test carried out on site;
• Monitor and report progress of the works on site;
• Manage a team of RTOs
• Work atleast 60 hours per week

Requirements

• Registered with JAC of IES/ACES as an accredited Resident Engineer
• Possess a Degree in Civil Engineering
• Minimum 10 years of relevant experience in Deep Excavation underground projects
• Minimum 8 years of hands-on site experience specifically with LTA projects
• Professional experience in deep excavation, Earth Retaining Stabilizing Structures (ERSS), Diaphragm wall construction, Jet Grouting, Strutting works, Drain diversion, etc

AMC Founded in 2006, licensed by the Singapore Police Force, Police Licensing and Regulatory Department. offers custom security solutions suited to your demands. We work towards meeting the unique needs of every client, be it an enhancement to your current security set up or a complete overhaul that includes:

• Virtual patrolling

• Facial recognition access control

• Remote vehicular access control

• License plate recognition technology

• Visitor Management System

Responsibilities:

• Plan, develop and execute test plans and test cases for desktop and web-based applications.
• Perform manual and automated testing using tools like Selenium, Bash scripting and Python.
• Identify, document, and track bugs using bug tracking tools such as JIRA
• Collaborate with developers, product managers, and other stakeholders to ensure high-quality software releases.
• Conduct performance testing using tools like JMeter.
• Perform API testing using tools like Postman.
• Create and maintain test automation frameworks and scripts.

Requirements:

• Previous leadership experience in planning and proposing QA test activities to stakeholders.
• Proficiency in Python scripting, bash scripting and C++ would be beneficial.
• Strong understanding of manual testing methodologies and processes.
• Experience with automation testing tools (e.g., Selenium).
• Familiarity with version control systems (e.g., Git, SVN).
• Knowledge of Windows and Linux environments.
• Excellent analytical thinking and attention to detail.
• Strong verbal and written communication skills.
• Ability to troubleshoot and resolve issues efficiently.
• Experience working in agile teams.
• Familiar with test methodologies, including functional and non-functional testing, regression testing, smoke testing, sanity testing, end-to-end testing, integration testing, and installation testing

Just imagine your future with us…

At Aurecon we see the future through a very different lens. Do you?

Innovation, eminence and digital are at the heart of everything we do. Are you excited about the future?

Are you driven by the opportunity to work on some of the most challenging and complex projects around the world and to learn from the best? We are.

Diversity is at the core of everything we do. We work together to create a culture based on respect, trust and inclusiveness. Our differences are what fuel our creativity.

What will you do?

In this position you will join our Singapore Buildings business, where you will play an integral part in a team of highly skilled specialists that ‘bring ideas to life’ for our clients across all types of building and infrastructure projects.

We know the work we do is vital in assisting our world’s economic development and, it’s the technical expertise and the depth of knowledge of our people that really sets us apart. Here are the key things you will do to ‘bring ideas to life’.

• Taking responsibility for projects from initial design, through to construction and final review.
• Working in collaboration with other design disciplines, locally and regionally to ensure the integrity of the overall design.
• Managing projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications.
• Assisting in workload management and resource forecasting and involved in preparation of proposal documentation.
• Reviewing and ensuring compliance, including drawings, reports, specifications, survey, access, and preparation of appraisals.
• Building and maintaining effective relationships with clients, recognizing, and developing potential business opportunities.

We know today’s complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.

What can you bring to the team?

Firstly, you will share our genuine passion for re-imagining engineering and be someone that actively pursues continuous learning to help shape the future. You will also need the following:

• A Bachelor’s Degree in Mechanical Engineering, with at least 10 to 12 years’ relevant experience in Buildings Mechanical Design and commissioning of M&E systems in modern commercial and industrial buildings. Data Centre Experience will be preferred.
• Strong project management skills with ability to lead project team members on technical delivery. Excellent presentation, verbal, and written communication skills.
• Sufficient experience to demonstrate intermediate to advanced knowledge of relevant engineering codes, standards, and practices.
• Organised approach and ability to accept increased responsibility and produce accurate and detailed work.
• High level of computer literacy and exposure to BIM / Revit will be highly desired, with advanced problem-solving skills through investigation and analysis.

Our Aurecon Attributes define our way of being – they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don’t expect you to have all eight of the attributes, but one that is unique to you. To find out what your key attribute is, take the test here.

We value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?

About Us

Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.

Over the last 85 years, our team of more than 5,000 experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world’s most complex challenges.

In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible and nimble. We embrace design-led thinking – an approach that is guided by digital engineering, the user experience and sustainability – ensuring that the work we do is future ready and leaves a legacy for the next generation.

Think engineering. Think again.

Want to know more?

You can learn more about what it’s like to work at Aurecon by visiting the careers section of our website.

If you are intrigued or excited by what you have read, then we want to hear from you. Apply now!

• MNC Construction Company

• Salary range: $5000 - $6000 (basic) + $100 Mobile Allowance

• Working hours: Monday – Friday (8:30am – 6:00pm)

• Working Location: Braddell

• Excellent Welfare & Benefits

Job Scope

• Assist Tender / Contract Manager in preparation and submission of Tenders.
• List the scope of work and commercial requirements in order to determine the risks of the project.
• Create Tender File in order to have proper tender management tracking and monitoring.
• Prepare and follow-up on the Request for Quotations to suppliers / sub-cons in order to ensure tender costing and technical data to be submitted on time.
• Collate price comparison, costing summary and technical proposal in order to prepare tender submission.
• Study the addendum and / or corrigendum documents and update costing summary with technical proposal accordingly.
• Prepare and update tender submission documents on time.
• Maintain relevant documentation in an orderly and proper manner.
• Prepare presentation slides necessary for the tender interviews.
• Any other works / duties that are assigned by Superior.
• Prepare plans and documents for quotations to suppliers that will be used as basis for pricing.
• Obtains, compiles and evaluates quotations from the respective suppliers / vendors according to tender requirements.
• Prepare bill of quantities which involves quantity take-off, material sourcing, measuring and estimating materials and labour costing.
• Carry out the detailed breakdown pricing.
• Understanding of Tenders with respect to scope of work, pricing schedule and non-material requirements.
• Attend onsite and consultants’ architects and associate consultants in the administration of projects.

Requirement

• Degree in Electrical Engineering or a related field.
• 3 years’ experience in tender management role (construction industry – electrical for building).
• Knowledge in HT LV, ELV systems, and ACMV / Fire systems is an advantage.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Their duties and responsibilities include:

• Preparing and interpreting blueprints, technical drawings, and plans
• Collaborating with architects, contractors, and other construction professionals
• Planning, directing, and managing the site workforce and subcontractors
• Ensuring that all building procedures and materials comply with building codes, regulations, and standards
• Carrying out surveys and assessing the suitability of construction sites
• Performing quality control tasks on budgets, plans, materials, and the final product
• Inspecting and reviewing projects to monitor compliance with building and safety codes, and other regulations
• Assessing potential risks and drafting mitigation plans
• Providing technical advice and solving problems on site
• Ordering and managing resources and materials to meet project deadlines
• Preparing reports regarding job status and progress to stakeholders

• Oversee contract execution and monitor installation progress, ensuring timely delivery through coordination with clients, consultants, and subcontractors.
• Prepare and review method statements, shop drawings, technical submissions, and work progress reports for M&E-related tasks.
• Liaise with stakeholders to resolve technical and site issues, and coordinate with authorities for inspections, testing, and commissioning.
• Assist in procurement of materials, equipment, and labour within budget while supporting project negotiations.
• Apply expertise in Data Centers, DfMA, and specialized systems such as VAV/VRV, chillers, chilled water pipes, and lighting control systems.

Requirements:

• Diploma in Mechanical/Electrical Engineering or equivalent.
• At least 2 years of experience handling and monitoring the progress of projects in Construction industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740