This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Job Description

• Conceptualisation and design of facades, preparation of drawings and structural calculations

• Delivery of technical presentations

• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members

• Supervision of construction, site inspection and training of constructors

• Preparation of technical submissions, proposals and documentation

Job Specifications

• Degree in Civil, Structural or Mechanical Engineering or related disciplines.

• 3 – 5 years of experience in façade design, engineering and construction and project management

• Proficient in CAD software to create designs and solve technical issues.

• Strong and diverse technical background with effective presentation skills

• Well-versed in construction trends, international design standards and building regulations.

• Possess a wide network of building professionals and property developers.

• Ability to multitask and work well in a team.

Knowledge, Skills and Abilities

• Proficient in CAD and 3D Modelling software - Revit, Rhino, Sketchup software

• Possesses deep understanding about various façade materials.

• Well informed in construction trends, international design standards and building regulations.

• Demonstrate organisation and communication skills

• Possesses relationship building and networking skills.

• Skilled in interacting with people of diverse cultural backgrounds at various levels.

• Possesses strong project management skills.

• Willing and able to travel as needed (1 – 2 times/month)

Jessie Hoe Huey Miin

CEI R1103861

EA: 99C4599

Responsibilities:

· Develop and deploy machine learning models: Design, build, and optimize machine learning models and algorithms to solve specific business problems. Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models into production environments.

· Model training and evaluation: Train and fine-tune machine learning models using appropriate algorithms and techniques. Evaluate model performance and identify areas for improvement, employing techniques such as cross-validation, hyperparameter optimization, and ensemble methods.

· Model deployment and integration: Collaborate with software engineers and DevOps teams to deploy machine learning models into production environments. Implement APIs and integrate models with existing systems and applications to enable real-time decision-making.

· Performance monitoring and maintenance: Monitor model performance and address any issues or anomalies that arise. Continuously improve models by refining algorithms, optimizing code, and incorporating feedback from users and stakeholders.

· Data analysis and insights: Perform exploratory data analysis, generate insights, and present findings to stakeholders. Use statistical methods and visualization techniques to communicate complex concepts and patterns effectively.

· Stay up-to-date with the latest advancements: Keep abreast of the latest research and trends in machine learning and artificial intelligence. Evaluate and recommend new tools, libraries, and methodologies to enhance the efficiency and effectiveness of the machine learning workflow.

Requirements:

· Education: Bachelor's or Master's degree in Computer Science, Data Science, Machine Learning, or a related field. An equivalent combination of education and experience will also be considered.

· Experience: At least 2 years’ experience working in a similar role. Hands-on experience in designing, developing, and deploying machine learning models in real-world applications.

· Solid understanding of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn).

· Experience with working on Large Language Models and Generative AI technology is a plus.

Technical skills:

1) Strong programming skills in languages such as Python.

2) Proficiency in machine learning frameworks such as TensorFlow, PyTorch, or Scikit-Learn etc.

3) Solid understanding of Statistical Analysis, Probability Theory, and Hypothesis Testing.

4) Familiarity with machine learning tools on cloud platforms (e.g., AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is a plus.

5) Problem-solving and analytical mindset: Ability to analyze complex problems, break them down into solvable components, and develop innovative machine learning solutions. Strong mathematical and analytical skills are essential.

6) Communication and collaboration: Excellent verbal and written communication skills, with the ability to convey technical concepts to both technical and non-technical stakeholders. Proven ability to work collaboratively in a team environment and effectively manage multiple priorities.

7) Adaptability and continuous learning: Willingness to adapt to evolving technologies and learn new tools and techniques. Demonstrated commitment to staying updated with the latest advancements in machine learning and artificial intelligence.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Lead in Site Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Ensuring environmental, safety, and health practices are carried out at all times.

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years experience in Building Engineering projects
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Organized, meticulous with positive work attitude
• Able to work independently and a team player
• Good analytical, supervision, and communication skills
• Completed QM project and a registered Core-trade Foremen/ Supervisor would be an added advantage

Job Functions:

• Collaborate with development teams to design, build, and maintain the Micro SaaS (Microservices as a Service)/LaaS (Logistic as a Service)/WMS (Warehouse Management System) website and its underlying platform components.
• Analyze and optimize web application performance to enhance overall user experience.
• Manage and maintain large-scale data suites on overseas cloud platforms, ensuring the stability and efficiency of data platforms and services.
• Monitor cloud resources, manage costs, and implement optimization strategies.
• Automating operations, performance tuning, troubleshooting and incident response, and cloud platform management

Education and Experience:

• Bachelor’s degree in computer science-related technical discipline, or equivalent practical experience; with minimal 2 years of working experience in Internet industry
• Proficiency in Java or TypeScript (Angular) for software development.
• Experience with K8S, Docker, SQL Server, MySQL, Redis, RocketMQ, and similar technologies.
• Familiarity with DevOps, SRE, and Scrum methodologies are plus.
• Experience in managing cloud platforms like Azure, AWS, or GCP.

Knowledge, Skills and Abilities

• Self-motivated, a good team player, and continuous improvement attitude
• Ability to read & communicate in Mandarin and English
• Good analytical and trouble-shooting skills.
• Effective communication skills and interpersonal skills.

• Hands-on and customer insights to operate/ administer a cloud infrastructure and firewalls.
• Configuration to high levels of performance, security, scalability, maintainability, aligning to design specifications
• Codify or implement/deploy configurations of automation by default in new projects with proper documentations
• Codify or maintain cloud systems using tools like Ansible, CloudFormation, Terraform
• Participate in Cloud Migrations for VMs using tools like CloudEndure with more than 50 VMs migration or Databases

Requirements:

• Minimum of 5 years IT working experience. Working exprience in cloud platform or tools
• Experience in operational/administration and deployment/migration projects in Cloud and Unix System administration
• Significant experience in problem solving, collaboration and communication, cloud technical expertise
• Experience in Networking skills is good to have

Kindly indicate 105 – Cloud Engineer on the subject

Interested applicants may send in their detailed resumes, with subject title: 105 – Cloud Engineer in MS Word format

(Reg. Nos. R1104128)

IT Consultancy & Services Pte Ltd

EA License No.: 92C5311

For more information about ITC, please visit us @ www.itcspl.com

Job Description

Analyze and design effective compiler optimization;

Implement or enhance code generation targeting mobile platforms;

Analyze and improve the efficiency of our toolchains and build systems with compiler techniques;

Collaborate with cross-product teams to deliver technical solutions and best practices.

Qualifications

Bachelor or above degree in computer science or a related technical discipline, with 5+ years’ experience as a software engineer and 3+ years leading a software engineering team;

Experience in mobile infrastructure, particularly in the compiler, performance optimization, quality, and development efficiency;

Proficient in (at least one): Java, C/C++,Python;

Skilled in building trust-based relationships with the team and fellow leaders;

Experience in managing a cross-regional team is a plus.

Workplace: Ang Mo Kio

Job Description:

• Manage the QA and QC activities of assigned projects to ensure systems meets the customer quality requirements
• Plan, conduct and monitor testing and inspection of Projects work products to ensure finished product quality
• Conduct internal Quality Audits
• Collect and compile statistical quality data
• Prepare reports to communicate outcomes of quality activities
• Coordinate and support on-site audits conducted by external providers
• Develop, monitor and recommend preventive actions
• Investigate customer complaints and issues
• Assist in drafting QA policies and procedures
• Interpret and implement quality assurance standards and procedures
• Analyze data to identify areas for improvement

Requirements:

• Quality inspection, auditing and testing experience
• Experience in software/system/product development lifecycle
• Knowledge of tools, concepts and methodologies of Quality Assurance
• Knowledge of relevant regulatory requirements like ISO 9001, ISO 27001 would be advantageous

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Responsibilities

· Functional blocks and/or subsystems of digital ASICs from design to silicon verification. This includes RTL coding, verification, silicon validation, and qualification.

· Proactively work with other team members and partners to align on specifications, conduct reviews, and complete documentation.

· Contribute to ASIC roadmaps and future innovation.

· Develop technical leadership skills.

· Participate in co-development activities to help prototype ASIC designs in FPGA or other software models to support pre-silicon firmware development and verification.

Education And Experience Required

· BS or MS degree in electrical engineering or equivalent with focus on VLSI design experience

· Fresh MS graduates are welcome.

Knowledge And Skills

· Knowledge of submicron semiconductor technology

· Familiar with digital ASIC/SOC design flow from RTL to silicon characterization

· Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.

· Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.

· Ability to apply analytical and problem-solving skills

· Strong written and verbal communication skills, ability to negotiate design features and options

· Knowledge of embedded system design, verification, and product development lifecycle

· Deep knowledge and domain know-hows in ARM/RISC-V microprocessor subsystem

Purpose: Responsible for reviewing customer supplied data and drawings; and the creation of manufacturing data, programs, tools, jigs and fixtures required for the manufacture of complex machined parts in the most efficient and safe machining process.

Key Area of Responsibilities:

• Review customer (internal/external) supplied data and drawings to ensure that supplied information aligns with project requirements and standards.
• Create manufacturing data, programs, tools, jigs, and fixtures required for the manufacture of complex machined parts in the most efficient and safe machining process.
• Perform machine simulation for all CNC programs to ensure error-free machining prior to release.
• Create detailed and clear shopfloor documentation such as machining setup sheets and tool list.
• Handle workshop feedback and troubleshoot problems relating to CNC machining, programming, and cutting tools in order to ensure parts are produced according to customers' drawings specifications.
• Manage revision control on the 3D model, drawing, program, tool list, and setup sheet documentation to ensure accurate records and allow all parties to follow the right revisions.
• Drive continual improvement on existing CNC program.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 5 years of working experience in the precision machining industry.
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Experience with 3D CAD, 3D CAM and simulation software (e.g. NX, and Vericut)
• Technical knowledge of cutting methodologies and cutting tools
• Experience with tool database software, automation, and post-processor development is advantageous.
• Problem Solving and Continuous Improvement

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• AWS & performance bonus
• Staff incentive
• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

As a Fab 10 Facilities Operations Transformation Engineer, you will play a pivotal role in redefining our Facilities Operations to support our advanced memory and AI applications. You will lead multiple exciting programs aimed at improving team productivity and ensuring an uninterrupted supply of plant utilities and facilities services, operating 24/7 to support Fab Production. Your innovative mentality and passion will drive continuous improvement through data, automation, and enhanced operational strategies. You will have opportunities to work with people from various backgrounds and different responsibilities.

Responsibilities and Tasks:

• Drive improvements to all existing and future Operations programs, coordinating with all Facilities system owners from all sites in Fab 10.
• Lead Post Incident Review (PIR) processes to prevent facilities supply interruptions and ensure smooth execution of critical work through the Site Incident Prevention Plan (SIPP).
• Spearhead labor productivity improvement projects, using business process improvement and automation in daily operations.
• Area Quality Coordinator (AQC), leading quality improvement programs, includes: problem-solving, quality champion, and human deviation reduction.
• Represent Fab 10 in Global Facilities AQC and Operational forums to handle, lead, and facilitate all Global Facilities operations and quality programs.
• Learn and drive improvement to Facilities daily operations, including but not limited to:
• Supervise and handle facilities equipment's and system through FMCS or equivalent, like Life safety system.
• Respond swiftly to abnormal condition affecting production or the site in general and raise it to relevant parties accordingly.
• Reponse and restore facilities services in a timely manner to minimize interruption to production or the site
• Support and implement operating procedures and risk assessments for all facilities systems and facilities-related work activities.
• Follow up on incidents or service interruptions with system owners.
• Coordinate and connect with internal and external parties for facilities operation-related activities.
• Support the shift operations ERT (Emergency Response Team).
• Support Facilities Operation meetings with the Facilities Operations Manager.
• Coordinate, handle, and improve the work permit system.
• Act as a backup for the Site Operations Manager’s functional scope if required.
• Prepare and consolidate operation reports.

Requirements:

• Bachelor in Engineering (Mechanical/Electrical/Controls and Instrumentation) or equivalent experience.
• Have experience with Facilities systems in Semiconductor Industry
• Experience and familiarity with data analytics/automation software such as: Tableau, Microsoft Excel, Python, SharePoint, Power BI, SQL.
• Ability to handle multiple tasks concurrently, prioritize and handle workload.
• Fluent digital literacy, including word processing, spreadsheet, database.
• Team player who enjoys working in a cross-functional environment and the ability to develop long term partnership across teams.
• Positive, energetic, and daring to innovate with the drive to actualize concept into plan.
• Excellent problem solving and analytical thinking!

Responsibilities

· Understand customer demands, challenges, and objectives through assessments, information gathering and Customers, technology/industrial engagements

· Collaboration with sales & business development, product & engineering stakeholders including analyse and selection of appropriate hardware, software, and services to create the winning solution offering to customer and markets

· Developing detailed proposals, presentations, and technical documentation that outline the proposed solutions, including features, benefits, and pricing. Presenting these proposals to customers in a clear and compelling manner

· Preparation and conduct of product and solution exhibitions, demonstrations and proof-of-concept activities to showcase the capabilities and address any technical questions or concerns from customers

· Providing technical expertise and support to business development & sales team throughout the sales cycle, including participating in customer meetings, responding to technical queries, and contributing to the development of sales strategies

· Building and maintaining relationships with technology vendors and partners to stay informed about the latest products, technologies, and industry trends. This includes evaluating new solutions and incorporating them into proposed designs

· Keeping up-to-date with advancements in communication technologies, industry standards, and best practices. Pursuing opportunities to enhance technical skills and knowledge

Requirements

· Degree in Electrical/Electronics/Communications Engineering

• Minimum 5 years’ experience in Communications/Telecommunications/Infosystems Solutions Engineering and Implementations, supporting as a Pre-Sales capacity

· Strong understanding of communications technology

· Able to follow up closely with customers in order to answer to their needs

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected]

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Built on decades of expertise and execution, Marvell’s custom Processor/ASIC solution offers a differentiated approach with a best-in-class portfolio of data infrastructure intellectual property (IP) and a wide array of flexible business models. In this unique role, you’ll have the opportunity to work on both the physical design and methodology for future designs of our next-generation, high-performance processor chips in a leading-edge CMOS process technology, targeted at server, 5G/6G, automotive, and networking applications.

What You Can Expect

• You will work with a global team on both the physical design of complex chips as well as the methodology to enable an efficient and robust design process.
• You will be responsible for maintaining, enhancing, and supporting Marvell's Place and Route Flow, leveraging industry-standard EDA tools.
• Your tasks will include performing synthesis, place and route, as well as timing analysis and closure on multiple intermediate and complex logic blocks.
• You will play a crucial role in developing and implementing timing and logic ECOs, collaborating closely with the RTL design team to drive modifications that address congestion and timing issues.
• Additionally, your involvement with the global timing team will include debugging and resolving any block-level timing issues encountered at the partition level.
• This position provides an exciting platform to engage with diverse engineering challenges within a collaborative and innovative environment at Marvell.

What We're Looking For

• Bachelor’s Degree in Electrical/Computer Engineering, Computer Science, or related fields and min 10 years of related professional experience OR a Master’s degree and/or PhD in Electrical/Computer Engineering, Computer Science, or related fields with min 5 years of related experience. In your coursework, you must have completed a digital logic course and projects that involved circuit design, testing, and timing analysis.
• Good understanding of standard RTL to GDS flows and methodology
• Good scripting skills in languages such as Perl, tcl, and Python
• Good object-oriented programming skills
• Good understanding of digital logic and computer architecture
• Knowledge of Verilog/VHDL
• Good communication skills and self-discipline contributing in a team environment

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in electrical engineering
• 2-6 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job highlights

Positive team atmosphere, Career growth opportunity, Flat organization, 100+ mil users, Competitive compensation

Responsibilities

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

At TikTok, our people are humble, intelligent, compassionate and creative. We create to inspire - for you, for us, and for more than 1 billion users on our platform. We lead with curiosity and aim for the highest, never shying away from taking calculated risks and embracing ambiguity as it comes. Here, the opportunities are limitless for those who dare to pursue bold ideas that exist just beyond the boundary of possibility. Join us and make impact happen with a career at TikTok.

This position is with TikTok's Stability Assurance Team. The team is responsible for ensuring that the services provided by TikTok are highly reliable with low-latency. Reliability assurance is complex and systematic for any massive application system and the team focuses on optimizing the application architecture from end to end; driven by data analysis, with automatic and intelligent failure recovery.

Job Responsibilities:

1. Ensure the online stability of the core system such as TikTok/Live, quickly respond to online accidents and build mechanisms and platforms to improve processing efficiency.

2. Participate in the construction of operation and maintenance tools and platforms, and promote the automation of operation and maintenance.

3. Find system weaknesses and improve projects on the ground through continuous and comprehensive data operations (including availability indicators, historical accidents, resource utilization, etc.),

4. Accumulate best practices in operation and maintenance, provide guidance for business architecture design and component selection, and output operation and maintenance technical documents;

5. Promote the improvement of service reliability, scalability and performance optimization to ensure system SLA.

Qualifications

- Bachelor's Degree or above, Major in Computer Science;

- Solid basic knowledge of computer software; understand the relevant principles of Linux operating system, storage, network IO, etc.;

- Familiar with one or more programming languages, such as Python/Go/Java/PHP/C/C++;

- Have the ability to solve problems systematically, good communication skills, and a strong sense of responsibility

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

As a Non-Volatile Engineering(NVE) Product Engineer at Micron technology Inc, you will be responsible for driving an effort to accelerate NAND development learning cycles to achieve best in class cycle time from first silicon to qualified system.

Additionally, you will work with various Engineering and Development groups to ensure necessary actions are taken to meet NAND reliability( material assessment flow) product requirements. You will be engaged in developing, validating, characterizing, and qualifying Micron's next generation 3D NAND memory products to power our customer's innovation.

Key Responsibilities :

• Define NAND Flash reliability test flow to assess the product reliability performance and ensure no intrinsic reliability issues escape to customer
• Perform high volume statistical data analysis for NAND intrinsic reliability risk assessment
• Drive Solution Space through electrical failure analysis through trims characterization with root cause understanding
• Develop short term counter measures in form of stresses/screens by exercising Digital and Analog Circuit, Device Physics, Process Engineering knowledge
• Collaborate with Fab, NAND Technology Department, NAND Design, NAND Product Development, System Development and Quality/Reliability team to develop solutions and ship end products

Requirements :

• Bachelor's Degree in Electrical Engineering or related disciplines with at least 3 years of related work experience
• Excellent understanding of NAND Flash Device Physics is required
• Knowledge of Programming Languages such as Python/C/C++ is required
• Effective communication skills in written and spoken English
• Good multitasking skills and ability to set priorities in a fast moving, dynamic environment.
• Excellent problem solving and analytical skills
• Self-motivation and enthusiasm

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

Role:

Sales Engineer (Semiconductor / Up to $4500)

• Location: Loyang Way
• Working Days: Mon - Fri
• Working hours : 830 a.m. to 530p.m.
• Salary : $3,000 - $4,500 (depends experience)

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up-to-date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in Engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform technical assistance for different components and systems in power management and backup solutions.
• Liaise with end-users for on-site installation, commission, repair and maintenance.
• Ensure on-site work are carried out in safe manner and comply to safety measures.
• Monitor on maintenance contract to ensure work is carried out timely.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of experience in offering technical support in the UPS/DC Power sector.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

As a Steel Structure Engineer specializing in steel structures, you will be responsible for planning, designing, and overseeing the construction and integrity of steel-based structural components and frameworks. This role involves ensuring structural safety, compliance with codes and regulations, and independent delivery of engineering solutions from inception to completion.

Key Responsibilities:

1. Design and Analysis: Conduct structural design calculations for steel components, connections, and frameworks, ensuring compliance with relevant codes (e.g., AISC, Eurocode, or BS standards).
   Analyze load-bearing requirements, seismic impact, and material properties to create safe, efficient designs.
   Create detailed drawings, specifications, and technical documentation.
   
2. Project Management: Manage steel structure projects from initial design to final implementation, including budgeting, scheduling, and coordinating with other teams.
   Perform risk assessments, implement quality control procedures, and ensure compliance with safety and environmental standards.
   Monitor project progress, making adjustments as necessary to stay on track with timelines and budgets.
   
3. Collaboration and Coordination:Work closely with architects, civil engineers, project managers, and construction teams to integrate structural requirements into overall project design.
   Coordinate with suppliers and contractors to ensure timely and accurate delivery of materials and execution of installation.
   Provide technical guidance and oversight to junior engineers and drafters.
   
4. Quality Assurance and Compliance: Conduct on-site inspections, quality checks, and structural assessments to ensure compliance with design specifications.
   Ensure that all steel structures meet safety and regulatory requirements, adapting designs as needed for unforeseen challenges.
   
5. Reporting and Documentation: Prepare project reports, cost estimates, and technical summaries for stakeholders.
   Maintain organized records of project documentation, calculations, and revisions.
   

Requirements:

1. Education and Experience:Bachelor’s degree in Civil Engineering, Structural Engineering, or related field. At least 2 years of experience in steel structure engineering, with a strong portfolio of completed projects.
   
2. Technical Skills: Proficiency in structural analysis software (e.g., STAAD Pro, ETABS, SAP2000) and CAD tools (e.g., AutoCAD, Tekla, Revit).
   Solid understanding of steel design standards, load calculations, material properties, and connection detailing.
   
3. Project Management Skills:Strong project management abilities, including budgeting, scheduling, and resource allocation.
   Ability to independently lead a project from start to finish, making critical decisions as necessary.
   
4. Soft Skills:Excellent communication and interpersonal skills to collaborate effectively with multidisciplinary teams. Detail-oriented with a strong commitment to accuracy and quality. Problem-solving skills to address design and site challenges effectively.
   

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Design in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Design, you will:

Responsible for product analyzing, design for manufacturing (DFM), tool design 3D and 2D drafting, tool review and debugging.

The key responsibilities are as below:

• Construct mold design layout and conduct mold design review meeting.
• Design precision plastic injection molds in accordance with the requirements.
• Mold management and liaise closely with internal and external customers on matters relating to mold design.
• Preparation of detail bill of material and maintain thorough documentation of hardcopy and softcopy.
• Participate in the First-Off Tool review and assess the suitability of the tool for production.
• Performs other duties as assigned.

What skills and experiences are we looking for?

• Possesses at least a Diploma in Mechanical, Manufacturing, Precision Engineering, and/or any equivalent engineering discipline.
• 2 years of working experience in tool design, and/or any relevant experience.
• Experience in making LSR mold design, as well as packaging mold design is an advantage.
• Proficient in AutoCAD, Unigraphics and Microsoft Office Applications.
• Familiar with engineering drawings and GD&T.
• Ability to develop complex designs to the point of manufacture and release to production.
• Knowledge of plastics & elastomers.
• Team player with a good verbal and written skills.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.