Responsibilities

• Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements
• Preparing and submitting the Weekly & Monthly Quality reports.
• Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.
• Maintaining the RIN Register and follow up with QPS for closing.
• Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.
• To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench,trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.
• To be physically present during Asphalt pavement work for Road diversion work.
• Study Shop drawing and liaise with design department on the design issue that may cause difficulty in production.
• To conduct mould inspection for every new mould and mould in use.
• Materials ordering
• To arrange production based on Daily Production Planning from planning department.
• Responsible for achieving the daily planned volume/productivity.
• To prep our inspection together with production supervisor and RTO

Requirements

• Degree in any Engineering Discipline
• Minimum 5 years experience in QA/QC works in railway construction, with at least 1 year LTA MRT experience.
• Experience in structural steel works or precast RC works
• Good interpersonal skills and communication skills
• Open to 6D work week with long working hours to meet tight project deadline.

Tasks:

● Develop and implement SLAM algorithms for accurate simultaneous localization and

mapping of autonomous robots in outdoor environments..

● Integrate sensor data from various sources (lidar, cameras, IMUs, wheel encoders) to

improve SLAM performance and accuracy.

● Utilize calibration techniques to ensure accurate sensor data fusion for SLAM.

● Collaborate with other team members to ensure overall system integration and

functionality.

Education:

● A bachelor's or master's degree in Robotics, Computer Science, Electrical

Engineering, or a related field is typically required.

Technical Skills:

● SLAM algorithms: Proficiency in developing and implementing SLAM

techniques such as EKF-SLAM, Graph SLAM, or FastSLAM.

● Sensor fusion: Experience with integrating data from sensors such as lidar,

cameras, IMUs, and wheel encoders for accurate localization and mapping.

● Robotics: In-depth understanding of robotic systems, kinematics, dynamics,

and control theory.

● Programming languages: Proficiency in languages commonly used in

robotics, such as C++, Python, or ROS (Robot Operating System).

● Simulation tools: Experience with robotic simulation frameworks like Gazebo

or V-REP.

● Problem-solving and analytical skills: Strong analytical and problem-solving

abilities are vital for identifying issues, debugging complex systems, and

proposing effective solutions.

● Communication and teamwork: Excellent verbal and written communication

skills to collaborate with cross-functional teams, document technical

specifications, and present findings effectively.

Experience:

● SLAM implementation: Prior experience in developing SLAM algorithms and

systems for autonomous robots.

● Sensor integration: Knowledge of integrating sensor data from various

sources to improve SLAM performance.

● ROS: Practical experience with the Robot Operating System (ROS) for robotic

software development and integration.

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Job Description

• Industry / Organization Type: Manufacturing
• Position Title: QC Engineer / Quality Control Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Work with Process Engineer & Engineering team on QC requirement
• Document inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

APPLY NOW!!!

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirements in PCB Assembly, quality requirements of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to converse with overseas suppliers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65192 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description:

- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Responsible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 2-4 years Experiences in Civil and Structural sector process plant.

Job Description:

• Responsible for electrical control, electrical schematic design, electrical cabinet wiring, standard component selection, and development of related PLC programs.
• Accurately release BOMs, electrical schematics, and layouts, and estimate labor hours.
• Develop work instructions for electrical cabinet assembly and implement process improvements.
• Complete other tasks assigned by the leadership.

Job Requirements:

• Diploma or higher, CET-4 or above in English, with a background in Mechatronics, Electrical Automation, or related fields.
• Familiarity with electrical cabinet development processes, working principles, and knowledge of electrical automation.
• Proficiency in software such as AutoCAD and EPLAN.
• Strong communication and coordination skills, with a responsible, meticulous work ethic, a spirit of innovation, and excellent teamwork abilities.
• 
  
• Diploma or higher, CET-4 or above in English, with a background in Mechatronics, Electrical Automation, or related fields.
• Familiarity with electrical cabinet development processes, working principles, and knowledge of electrical automation.
• Proficiency in software such as AutoCAD and EPLAN.
• Strong communication and coordination skills, with a responsible, meticulous work ethic, a spirit of innovation, and excellent teamwork abilities.

1. Diploma in mechanical engineering, three years or more of equipment hoisting, pressure pipeline installation, painting engineering, thermal insulation engineering, welding related work experience.

2. Skilled use of MS office

3. Need to write MSRA, preferably trained in RA writing

4. Sort out the workflow

Job Description

• Industry/ Organization Type: Manufacturing/ Production (Precision Engineering)
• Position Title: Procurement Engineer
• Working Location: Kaki Bukit
• Working Hours: 5 days (Mon – Fri, 8am – 5.30pm)
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Report to Operations Manager.
• Obtain quotations and purchase raw materials, components, and assign secondary processes to subcontractors.
• Update approved machining subcontractor quotations in the system.
• Issue and manage Work Orders and Purchase Orders.
• Source materials, components, and plating for cost reduction.
• Perform evaluations for company purchases and assist with assigned duties.
• Collaborate with the group sourcing team on procurement evaluations.
• Develop and manage the Supply Chain Management plan.

APPLY NOW!!!

• At least Diploma in Mechanical Engineering with 1 year of related working experience. Preferably from the Manufacturing industry.
• Proficient in Microsoft Office is a must.
• Experience with CRM tools (such as Salesforce) would be beneficial.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71172 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry / Organization Type: Manufacturing
• Position Title: QC Engineer / Quality Control Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Work with Process Engineer & Engineering team on QC requirement
• Document inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

APPLY NOW!!!

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirements in PCB Assembly, quality requirements of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to converse with overseas suppliers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65192 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Japanese MNC Subsidiary
• Basic from $6,000 to $9,000 + Variable Bonus
• Monday – Friday, 8:30am – 6pm
• Saturday, 8:30am – 12:30pm
• Location: Various locations

Responsibilities

• Lead the Project Team as a Project Manager to oversee project progress while managing costs effectively.
• Supervise sub-contractors' work to ensure compliance with shop drawings, method statements, materials, and samples.
• Coordinate with authorities, sub-contractors, consultants, and clients on shop drawings, materials, and samples.
• Review and align Electrical and ELV design drawings to ensure they meet design specifications and guidelines.
• Manage and execute projects within the stipulated deadlines.
• Attend meetings with contractors to address issues and provide progress updates.
• Review drawings and specifications for compliance with standards.
• Assign tasks to Engineers and Supervisors, ensuring work meets standards and SOPs.

Requirements

• Min. Diploma in Electrical Engineering and at least 10 years of relevant experience.
• Possess strong technical knowledge in Electrical and ELV services, identifying discrepancies with Structural, ID, architectural, and client provisions.
• Proficient in MS Office and Microsoft Project.
• Skilled in leading a team and performing effectively under pressure.
• Candidates with extensive experience may be considered for a senior position.
• FLUENT IN MANDARIN & ENGLISH TO LIAISE WITH MANDARIN-SPEAKING ASSOCIATES.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected]

**Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752
EA. Registration No.: R24123733 | Chen Yit Keat

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, or PhD with Min. 5 years’ experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Project Engineer

Working Day: Mondays to Fridays: 8:30am to 6pm

Salary: $6800 – $8500

Location: Pandan Road Singapore (Clementi)

(We have company bus departing near Clementi MRT station)

Responsibilities:

• Report to the Project Director / Manager in charge of the WTW system.
• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Requirements:

• Min Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Added advantage with specific experience in WTW system (Offshore Passenger Transfer System).
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software an added advantage.
• Good understanding of Document Control. Added advantage with knowledge of ISO9001:2015 QAM system

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

- Location: Bedok

- 5days work

- Basic + AWS + VB

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.

Requirement:

• Diploma/ Degree in Electrical/ Electronics Engineering or related discipline
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Chemical Process Engineer (Chemical Engineering / Operations)

• Tuas (Company Transport / Transport Allowance if candidate travel to work by themselves (S$120)
• 5 Days work per week (Mon to Fri 8am to 5pm)
• Basic: $3800 to $4300 + site allowances
• At least a Bachelor in Chemical Engineering + Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Career Progression Opportunities

Job scope

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turnkey manager to plan and execute plant shutdown

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Site Engineer

Working Days: Monday - Saturday

Working Timing: 0830am - 530pm

Office Location: Kranji

Salary range: $2500-$3500

Responsibilities

Project Management

• To resolve all technical and non-technical issues during the project lifecycle.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Minimize material wastage on-site and maximize machinery/equipment usage.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Achieve targeted progress of works to ensure the intended cash flow.

Technical Understanding

• Fully understand project drawings and scope of work.
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Day Technician

• Work Location: Jurong (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range : $2200 - $2500 + $200( Site Allowance )

Responsibilities:

The Day Technician is responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations.

• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan.
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance.
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator.
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning.
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement.
• Any other duties as assigned.

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• 5 days, Boon lay, Transport provided to & fro
• $4000 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186