We are looking for an Asst Engineer / Engineer to be part of one or more teams in supporting and maintaining systems, keep them up and running smoothly 24/7. The Asst Engineer / Engineer should have broad technical skills and a working background in the System-Level Maintenance in the following disciplines, Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS.

Responsibilities:

• Involve in one or more teams in supporting and maintaining systems, keep them up and running smoothly
• Report to the Team Lead/Service Delivery Manager and in fulfilling SLA and KPI in accordance to maintenance contractual agreement.
• Assist Team Lead/Service Delivery Manager to deliver contract obligation within budget.
• Able to operate and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders.
• To perform routine Preventive Maintenance in accordance with the maintenance instructions / procedures.
• To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures, involving fault troubleshooting, diagnosis & replacement of equipment/module/component at sites and/or workshop.
• Liaison with procurement and equipment vendors.
• Perform 24/7 off-site standby for fault activation after office hours.
• Arrange and attend monthly meeting with customers.
• Provide engineering services such as engineering reports, supply support, configuration control and management and obsolescence management.
• Provide solutions to technical problem associate with RF communication systems.
• Required to travel to sites for work

Requirements

• Minimum of Diploma in Electronics/Mechatronics/Computer Engineering or equivalent
• Minimum of 2-3-year experience in a similar engineering-related capacity.
• Positive work ethics and team player.
• Takes ownership of responsibilities.
• Thrive in multi-disciplinary and cross-functional environments
• Able to work effectively in an indoor and outdoor environment.
• Preferably with some knowledge in Data Analytics (e.g. failure trending/patterns)
• Preferably with experience in System-Level Maintenance in the following disciplines is highly preferred (Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS). Other Engineering-related experience maybe considered.
• Evident in written, verbal and interpersonal skills
• Proficient in MS Office (Words, Power-point & Excel)

Job Description

• EPCI Contractor engineering focal point to manage safety engineering deliverables and safety risk studies – Focal point between third party safety studies consultant, Owner/Operator, as well as topside engineering contractor and Hull & Marine engineering contractor (if any).
• Ensure that the assigned scope of work is delivered technically feasible and within the project schedule
• Responsible for preparing the TBE on third party consultants based on the safety study proposal.
• Responsible for reviewing reports from third party consultant.
• Ensure that inter discipline coordination for input collection to feed into the respective safety studies
• Responsible for managing the interface issue and coordination with topside and Hull & Marine engineering contractor (if any) concerning technical safety engineering matter.
• Identify, review and feedback/follow up on the recommendations from safety studies with the relevant responsible party to take into consideration in design.
• Support Project Management Team on the CTR, MDR and schedule development and updates.
• Responsible for developing design safety philosophy
• Responsible for reviewing active and passive fire protection philosophy and specification
• Additional responsibility as per project requirement assigned by project manager (project specific)
• Participate in Inter Discipline Comments (IDC) of engineering documents from other engineering disciplines

Job Requirements

• Bachelor’s degree in Engineering, preferably Chemical Engineering
• At least 5 years of relevant working experience in marine/ offshore industry
• Well versed with regulatory and class requirements.
• Possess good communication and interpersonal skills.
• Able to work in a team.

• MNC Company
• Basic $5000 - $6000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF

Job Responsibilities:

• Interpret applicable Legal, Singapore Standards, Code of Practice & other requirements and implement & provide directions for compliance.
• Develop, maintain and periodically test out emergency response, Organize & conduct CERT audit and other emergency response relevant drills.
• Liaise with local authorities for all EHS issues, Licence renewal and represent the RC/SICA and other relevant meetings.
• Manage all EHS incident and non-conformance investigations and track corrective and preventive actions to closure.
• Organize risk assessments, site inspections and industrial hygiene and environmental samplings as well as implement or direct risk reduction and control measures.
• Conduct and organize EHS audits, trainings, meetings and promotional programs to increase employee awareness and knowledge.
• Establishing EHS objectives & Targets and its management Programme for continual improvement.
• Contractor management on In-house & SDM (Shutdown Maintenance) activities.
• Should have strong awareness on Safety Case implementation as well as Mitigative Measures for Safety Critical Events (SCE) in Major Hazard Industries (MHI).
• Establish good communication with all level and function within the organization.
• Assist in the adhoc assignment or project assign by management.
• Spearhead continual improvement projects for HSE.
• Work with HSE department in organizing Annual Safety Campaign.
• Liaise with local authorities for all EHS issues, License renewal and represent the RC/SICA/SORT and other relevant meetings.
• Other ad-hoc duties as assigned.

Requirements:

• Min Diploma in Chemical Engineering
• At least five years of primary experience handling safety responsibilities within HSE department
• At least 3 years of working experience in the oil or petrochemical industry. Preferably experienced in Jurong Island
• Must be a Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF
• Good command of English (spoken and written)
• Experience with ISO14001/ SS651(ISO45001) management systems

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Hi,

Immediate Hiring!!

Role: SAP MM Consultant

Min 5 to 8 yrs of experience

JD

• Min 1 Greenfield S4hana Implementation
• Understanding Business requirements, Blueprint.
• Interacting with the Business Users
• Should have worked on Implementation project.
• Strong understanding of business processes in materials management.
• Proficiency in SAP MM configuration and customization.
• Experience with integration of SAP MM with other SAP modules (e.g., SD, PP, FI).
• Troubleshoot and resolve issues related to SAP MM.
• Should have Good Communications skills (Both written/ Verbal) and desire to learn new modules
• Hands- on experience on S4 HANA.

Regards

Kshama

+91 9833964181

[email protected]

Responsibilities

• Develop Manufacturing/Operating Instructions and necessary Standard Operating Procedures
• Develop, maintain, and troubleshoot the process control system recipe/Models
• Investigate, report and troubleshoot findings on both quality and EHS-related issues observed during manufacturing or batch record review
• Develop, implement, and monitor robust preventive measures for processing issues
• Play a proactive role in ensuring the site safety and quality standards are adhered to
• Proactively monitor, identify develop, and implement improvements in processes and equipment
• Communicate regularly to the plant personnel on process updates
• Train the process technicians on the process and procedures as required.
• Ensure adherence to approved procedures and update the procedures as required, including the principles and practices of good data management (ALCOA) Focus on Safety and GMP Compliance as operations | priorities and as performance measures
• Accountable for Good Data Management and Date integrity understanding and performance
• Report and investigate actions or behaviors that may negatively impact the desired outcome of the GMP process or activity
• Own on or more multiple equipment/GMP ayotema in production and present the system overview with evidence compliance to internal and external auditors.
• Develop courses of action and drive the implementation of solutions
• Play an active and impactful role to deliver flawless execution for respective PCTs (eg APL, MS, 00, Leadership, Engineering) by updating performance against metrics, highlighting & resolving issues with appropriate escalations Work with the PCT to identify and drive improvement as per continuous improvement (Cl) goals of the PCT.
• Uphold code of conduct and values
• The senior position is expected to perform a coaching role to junior engineers and manage more complex manufacturing and operation issues. He/she is also expected to lead working teams managing projects to support manufacturing processes. Collaborate with cross-functional teams to drive flawless execution.
• Internal Stakeholders includes:
• Operation-for supporting the operation team to meet production targets in cycle time and output
• Supply Chain-for ensuring availability of raw materials for production and supply of finished products to the market, for qualification of alternate sources of material/consumables Quality for production batch release, and production investigation/improvement
• Engineering for equipment readiness and production investigation/improvement
• EHS-for performing safety review of changes in the manufacturing processes and safety related investigation
• Technical Services for product chemistry, process design understanding production investigation improvement and product transfer
• External Stakeholders Equipment Vendors and raw material suppliers-for new materials/equipment/consumables sourcing and during process investigation/improvement

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!

Interested candidates, please submit your resume to [email protected]

Alison Chen

Outsourcing Team

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

1. Minimum 10 years of experience in Project management. With specialisation in

managing large scale IT projects, preferably datacentre and cloud setup and migration

2. Certifications in Project management and experience in Agile methodologies

3. Sound knowledge in IT Infrastructure (Compute, Network, Storage & cyber security) to

drive the projects

4. Experience in disaster recovery and business continuity

5. Knowledge of value stream mapping and process improvement techniques

Hi,

Immediate Hiring - Recruiter - (IT/SAP)

Manage the entire recruitment process for all positions in various industries

• Assist in job scoping by understanding corporate culture, objectives and business structures.
• Perform candidate screening and matching to job requirements
• Conduct interviews and recommend potential candidate profiles
• Placement of job advertisements on various websites
• Ensure adherence to all administrative procedures and that all reporting systems are kept up to date
• Drive recruitment strategy and hiring results by sourcing potential candidates through online channels, campus recruitment and networks.
• Manage full life-cycle of recruitment from screening, interviewing, negotiating salary offers to facilitating the hiring and on-boarding process.

Requirements:

· Diploma and above

· with CEI certification are highly advantageous

Regards

Kshama

+91 9833964181

[email protected]

Hi,

Immediate Hiring!!

Role: SAP SD Consultant

Min 5 to 8 yrs of experience

JD

• Min 1 Greenfield S4hana Implementation
• Understanding Business requirements, Blueprint.
• Interacting with the Business Users
• Should have worked on Implementation project.
• Good knowledge of Complete SD process Including Configuration\Customizing of Sales, Shipping, Pricing & Billing documents
• Design, customize, configure and testing of SD.
• Working knowledge on Integration between SD and other core modules like FICO/PS/MM.
• Should have Good Communications skills (Both written/ Verbal) and desire to learn new modules
• Hands- on experience on S4 HANA.

Regards

Kshama

+91 9833964181

[email protected]

Hi,

Immediate Hiring!!

Role: SAP FICO Consultant

Min 5 to 8 yrs of experience

JD

• Min 1 Greenfield S4hana Implementation
• Understanding Business requirements, Blueprint.
• Interacting with the Business Users
• Should have worked on Implementation project.
• Hands on Experience in FICO sub- module Accounts Payable(P2P) , Accounts Receivable(O2C) , Asset Accounting , Cash and Bank Accounting , GL Accounting , Profit Center Accounting , Cost Center Accounting , Internal Order Accounting ,
• Should have minimum of 2 E2E Greenfield S4hana implementation project experience. Including Planning, Process Design, Configuration, Testing, Deployment.
• Should have Good Communications skills (Both written/ Verbal) and desire to learn new modules
• Hands- on experience on S4 HANA.

Regards

Kshama

+91 9833964181

[email protected]

Hi,

Immediate Hiring for SAP ABAP Lead

· Engage and partner with internal customers, SAP team, and system integrator/application maintenance vendors to deliver business systems and processes.

· Enable the design and implementation of technical solutions across business units for a variety of SAP modules including but not limited to FICO, SDMM, PP, QM, PM, REFX, Fiori

· Assess technical solutions proposed by vendor partners.

· Proficient with various integrations with SAP S/4HANA system using SAP CPI, CIG, ODATA and hands-on expertise in SAP integration ALE, IDOCS and Web Services / RESTful required, for integrations with various systems such as Ariba, Concur, Success Factors, SAP Cloud Platform, BI/dashboarding tools and other non-SAP systems.

· Involve in supporting, troubleshooting and resolving system integration issues for Ariba CIG (Cloud Integration Gateway)

· Engage in project/scoping discussions with internal customers to understand business requirements and complexity to ensure the appropriate SAP services and capabilities are available, and recommend the technical approach/solution.

· Conduct regular reviews of the application portfolio and technical landscape to identify code redundancies/inefficiencies or system/program performance issues and work with vendor partners to recommend, improve and resolve.

· Build credible relationships with peers and stakeholders.

· Drive and manage technical projects relating to the SAP landscape.

Job Requirements:

· Degree in Information Technology, Computer Science, or other related disciplines

· Minimum 8 years’ hands-on experience in SAP ABAP

· Minimum 3-5 years’ hands-on experience in ALE/IDOC/Web Services/RESTful integrations experience

· Technical proficiency with at least 1 to 2 full life cycle of S/4 HANA (1809 or later) implementation and HANA support projects experience.

· Hands on expertise in SAP Cloud products & related processes/ services.

· Good knowledge in AWS/Azure & cloud platform is an added advantage.

· SAP S/4HANA Cloud and SAP BTP Integration and extensibility solution experience

· Strong knowledge of good programming/development standards, design methodologies.

· Working knowledge of DevOps automation concepts, practices, and procedures.

· Knowledge of modern back-end technology stacks, tools, and standards, including relational and non-relational databases, webservers, server-side frameworks such as Postgres, MongoDB, Nginx, Node.js, restful APIs, and OAuth is a plus

· Possess Database knowledge (Oracle, DB2, SQL, HANA, Sybase) and Operating System knowledge (UNIX, Windows, Linux)

· Skilled in change management, system analysis, requirements gathering and production control

· Strong troubleshooting and analytical skills, proactive and ability to communicate progress and outcomes, and provide clear recommendations

· Possess exceptional interpersonal and communication skills including verbal, written, listening and presentation.

· Willingness and keen to learn about new technologies, seek continuous learning and initiative to explore, research and hands-on.

· Good team player with positive attitude and strong work ethic with attention to detail.

· Ability to manage multiple tasks, work in a team environment, understand and be responsive to project and stakeholder needs.

· Ability to adapt and function effectively in a fast-paced, changing environment while working under tight deadlines.

Regards

Kshama

+91 9833964181

[email protected]

Job Requirements:

• Education: Nitec/Higher Nitec, Diploma, or Degree in IT, IS, Cybersecurity, or related fields.
• Experience: 2+ years in IT, IS, or Cybersecurity preferred. Fresh candidates may be considered for Associate Engineer roles.
• Knowledge of security technologies (Firewalls, VPN, DLP, IDS/IPS, SIEM, AWS, Azure, Google Cloud).
• Network/system troubleshooting (OSPF, BGP, AD, LDAP, RADIUS, SNMP).
• Programming (Python, C++, Java, JavaScript, Ruby, Bash, PowerShell).
• Certifications: CCNA/CCNP, CCSE/CCSM, CyberArk, CISSP, OSCP, or equivalent (preferred).
• Interest: Passion for cybersecurity trends and hacking techniques.

Requirements:

• Degree/Diploma with more than 1-5 years of experience
• Preferred from Cyber Security/Electronic/IT industries
• Proficient in Microsoft office softwares
• Proven business negotiations and presentations skills
• Possess professional communication skills and relationships management
• Possess high responsibility and strategic thinking
• Implement key time-management skills in high demand settings

The Opportunity

Adobe Experience Cloud provides the most comprehensive set of applications, capabilities, and services specifically designed to address today’s need for personalized customer experiences at scale. We are in need of a high-powered technical leader to help our largest customers navigate the operational challenges of delivering real time customer experiences at scale. You will work one-on-one with our top tier customers, supporting the implementation, technical health, performance optimization and business relationships with Adobe. You will be the technical partner our largest customers need in order to ensure their supercharged engine, finely tuned will make their customer experiences hum. Working in close collaboration with our Customer Success Manager this team will ensure strategic value realization from their partnership with Adobe.

A bit more about you

Responsible for evangelizing Adobe Solutions with enterprise customers, this role engages as the technical health leader, delivering dedicated services, methodology advice, and being the customer’s technical advocate within Adobe. Key elements of the role include Service Delivery Strategy, implementation cycle guidance, balancing risk and maximise value in Adobe technology adoption. In addition, partner with Customer Support leaders, you will field questions, log and work high priority issues & and handle critical issues while working with the extended Adobe Support team (Customer Support, Consulting and Engineering).

What you’ll do

• Build, develop, and maintain one-on-one relationships with customers.
• Produce and deliver a prescribed set of technical services to maintain operational health.
• Drive discussions with multiple personas from developers and analysts to management and senior leadership regarding tasks, projects, cases, and prioritization.
• Serve as a primary, technical go-to person for multiple customers, establishing a deep business and operational understanding of their environment.
• Field technical inquiries, handle customer issues, and influence partners to improve customers’ health.
• Strategically think about people, process, and technology challenges, helping customers realize the efficiencies and advantages of the Adobe Experience Cloud.
• Identify and mitigate risks to establish successful partnerships with Adobe.

What you need to succeed

• Experience in a customer-facing role with outstanding communication skills.
• Strong technical background with hands-on expertise to work through challenges and events.
• Ability to drive discussions and represent Adobe within a customer’s environment.
• Critical thinking regarding people, process, and technology challenges.
• Ability to successfully execute solutions and functionality to optimize customer investment.
• Demonstrated ability to identify and mitigate risks, ensuring customers' operational health.
• Ability to collaborate within a team to deliver world-class service.
• Experience and familiarity with the following (a plus but not a hard requirement): Adobe Analytics, Adobe Audience Manager (AAM), Adobe Experience Manager (AEM), Adobe Experience Platform (AEP), Adobe Campaign, Adobe Magenta, Adobe Marketo, Adobe Target.

Job Description

We are seeking a talented Information Systems Analyst to join our dynamic team. As an Information Systems Analyst, you will play a crucial role in analysing, designing, and implementing information systems that support organization's business objectives. You will work closely with various stakeholders to understand their needs, propose innovative solutions, and ensure the smooth operation of IT systems.

Key Responsibilities:

• Analyse current systems to identify areas for improvement and optimization.
• Gather and document business requirements, functional specifications, and technical specifications.
• Design and develop new systems or modify existing ones to meet evolving business needs.
• Plan and execute system implementations, including data migration, configuration, and testing.
• Conduct thorough system testing to identify and resolve defects and performance issues.
• Develop and execute test plans and test cases to ensure system quality and reliability.
• Provide technical support to users, including troubleshooting system issues and answering questions.
• Develop and conduct user training programs to enhance system adoption and usage.
• Create user manuals, guides, and other documentation to facilitate system understanding.
• Manage small to medium-sized IT projects, including planning, scheduling, and resource allocation.
• Monitor project progress, identify potential risks, and take corrective actions to ensure project success.
• Collaborate with cross-functional teams to coordinate project activities and deliverables.
• Monitor and maintain IT infrastructure components, such as servers, networks, and databases.
• Troubleshoot and resolve infrastructure issues to minimize system downtime.
• Implement security measures to protect sensitive data and systems from unauthorized access.
• Create detailed system flowcharts, data flow diagrams, and other technical documentation.

Qualifications and Skills:

• Master’s degree in Computer Science, Information Systems, or a related field.
• 3+ years of experience as an Information Systems Analyst or similar role.
• Strong analytical and problem-solving skills.
• Available to attend system issues beyond call of duty hours including during odd hours and weekends.

If you are a highly motivated and skilled Information Systems Analyst with a passion for technology and a commitment to delivering exceptional results, we encourage you to apply.

Interested candidates who wish to apply for the advertised position, please e-mail us an updated copy of your resume to email address: [email protected]

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for the purpose in connection to this recruitment and its related activities.

Responsibilities:

• Responsible for smooth and safe operations of the facility and including the the steam system and auxillaries operations.
• Responsible for the operating status of plant by observing control system parameters, BMS, distributed control systems of the facility and including the the steam system and auxillaries operations
• Conduct regular field inspections of plant, stations, or subsystems and equipment to ensure normal and safe operating conditions
• Supervise and lead the boiler and plant operators to operate treatment processes according to process parameters and emission limits compliance
• Identify plant optimization points and support the implement of the approved tasks by the site manager.
• Propose, append, develop and implement Standard Operating Procedures on plant operations and regular maintenance of the plant with the support of operations and maintenance team.
• Analyse, interpret and report on steam operations data and plant performance on periodic and timely basis;
• Recover plant process upsets, equipment malfunctions
• Conducting regualr inspection and testing of equipment to ensure it is safe and operating efficiently.
• Ensure and followup on the CMMS for logs of maintenance activities and repair procedures to ensure safe operation of equipment
• Inspecting facilities for hazards such as leaks, corrosion, or exposure to extreme temperatures
• Monitoring steam pressure and temperature levels to ensure safe operating conditions
• Consulting with management to provide advice on how to improve efficiency of processes or reduce operating costs
• Management and compliance of Workplace Health and Safety Act
• Other tasks assigned by the site manager

Requirements:

• Registered Class 2 Steam Engineer with MOM
• Familiar with FMEA, HAZAOP and Job Hazard Analysis methodologies
• Good interpersonal, management and decision-making skills
• Strong innovative and analytical skills and problem-solving skills
• A registered First-Aider Certification is an added advantage

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/Organization Type: Design & Manufacture of Material Handling Systems
• Position Title: Sales Engineer
• Working Location: Gul Circle (Transportation provided)
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $5,000 + HP Allowance + Incentive
• Duration: Permanent

Key Responsibilities

• Conduct customer visits, managing the full sales cycle from prospecting through to follow-up, utilizing sales leads, cold calls, etc.
• Develop and refine sales strategies for targeted customers to drive revenue growth and increase market share.
• Foster and maintain robust business relationships with both new and current clients, ensuring prospective and ongoing satisfaction with products and services offered.
• Deliver exceptional levels of customer service, ensuring clients' needs and expectations are met or exceeded.
• Provide comprehensive technical presentations and product demonstrations that clearly articulate the features, advantages, and benefits of our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or with at least 2 years of relevant experience.
• Experience in equipment sales or related field would be advantageous.
• Candidates without experience are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66217 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing – Fabrication
• Position Title: Sales Engineer /Assistant Sales Engineer
• Working Location: Tuas, 5 min from MRT
• Working Hours: Monday - Friday (8:30 AM-5:30 PM)
• Salary: Up to $4500 (Basic) + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Achieve growth and sales targets.
• Build and maintain customer relationships.
• Understand and manage customer needs.
• Communicate customer’s requirements effectively to internal team.
• Prepare and present quotations.
• Lead and support operations team for customer’s prototype/sample build to mass production.
• Order entry, planning and monitoring of delivery schedule and commitments to customers.
• Collaborate with raw material suppliers.
• Plan sales and materials based on customer forecasts.
• Participate in monthly stock takes to optimize inventory turnover.
• Other ad-hoc duties that may be assigned.

APPLY NOW!!!

• Background in Engineering, Manufacturing, or a relevant technical field.
• Experience in engineering sales/customer service is a plus.
• Strong marketing and business skills.
• Proficiency in Mandarin to liaise with Mandarin-speaking clients and suppliers.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67170 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Mechanical Service Engineer/Mechanical Engineer
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9 am – 5.30 pm (One Saturday per month, 9 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Perform engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.
• Conduct other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.
• Provide a service report with necessary recommendations & findings.
• Provide technical support for site engineers and customers whenever necessary.

APPLY NOW!!!

• Entry-level candidates with Higher Nitec, Diploma or Degree in Mechanical Engineering.
• Able to read and understand basic Mechanical diagrams.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66137 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Engineering (Marine Industry)
• Position Title: Mechanical Engineer
• Working Location: Gul Circle
• Working Hours: 5 days (Mon to Thurs 8 am to 6 pm, Fri 8 am to 5 pm)
• Salary Package: Basic Salary up to $5,000 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Follow up on projects from start to finish, including quotation, on-site work, invoicing, and service report.
• Lead technician teams through projects.
• Independently execute engine repairs and overhauls on board and on site.
• Dismantle, repair, replace, and reassemble mechanical parts.
• Troubleshoot and recommend repair solutions for machinery breakdowns.
• Conduct daily toolbox meetings with teams, ensuring safe work practices.
• Complete repairs, maintenance, and overhauls on time.
• Deliver high-quality services to satisfy customers.
• Prepare quotations for new inquiries and manage job costs within budget.
• Prepare service reports after project completion.
• Plan job methods and work schedules.
• Communicate with customers to ensure smooth project completion.
• Coordinate with local or overseas agents for job deployment and preparation.

APPLY NOW!!!

• Diploma or Degree in Marine/Mechanical Engineering or equivalent
• At least 3 years of ship repair experience in Singapore
• Able to work with tight schedules to accommodate ship arrival times
• Willing to perform hands-on mechanical repairs, installations, and removals
• Willing to work on-site, on board vessels, and in workshops with occasional irregular hours

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67187 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Your Job

Molex Singapore is seeking for a Process Outsource Engineer to support production process improvements for subcontractors outside Molex Singapore, ensuring quality, yield, and productivity enhancements. You will be responsible for the smooth release of new products to manufacturing, resolving process-related issues, and tracking assets.

Our Team

This role involves extensive collaboration with various internal departments, subcontractors, fabrication vendors, and machine vendors/suppliers.

What You Will Do

• Develop and continuously improve the sub-con quality system to meet agreed goals.
• Monitor project deadlines and budgetary expenditures.
• Collaborate with Sub-Con, Product Design, QA, and Components Engineers to ensure new product release for manufacturing, including full qualification.
• Implement productivity, quality, and cost reduction programs, as well as machine and process improvements.
• Address and resolve quality and process-related issues at sub-cons for assigned products.
• Provide production support to resolve sub-con quality/process problems.
• Manage product capacity expansion, including duplicating machines/fixtures if necessary.
• Qualify all tooling releases to manufacturing at sub-con.
• Maintain proper documentation control for process capability studies, process FMEA, SOPs, process specifications, OJT task analyses, training records, production records, and assets.
• Oversee equipment transfers from in-house to sub-con, ensuring machine setup and production qualification.
• Provide coaching and supervision for new engineers.

Who You Are (Basic Qualifications)

• Degree or Diploma in Mechanical, Manufacturing, or Production Engineering.
• Minimum of 4 years of experience in a similar position (for external candidates) or a minimum of 2 years in a Process Engineer position at Molex (for internal candidates).
• Proficient in process improvement.
• Knowledge of quality systems.
• Ability to identify and propose solutions for directional errors.

What Will Put You Ahead

• Ability to work effectively in a team environment.
• Willingness to take on challenges and demonstrate initiative.
• Six Sigma certification

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

You will be responsible for the design and development of new high-speed custom automation. You will lead the machine development process and guide the activities of tooling design engineers, overseeing the machine lifecycle from quoting to mechanical design and delivery scheduling.

Our Team

You will collaborate closely with the Mass Production, Quality, Product Design, Tooling Design, and Machine Build Teams. This position is part of the DSS Manufacturing Services division and focuses on automation shop activities, design, and project management.

What You Will Do

• Provides assembly feasibility (Design for Manufacturability) and equipment cost estimates to the new product development team.
• Works with engineering department to determine design complete dates. Prioritizes work and delegates work assignments to designer engineers.
• Designs new connector and cable manufacturing machinery utilizing the Siemens NX CAD software.
• Assists in developing and executing the machine qualification plan.
• · Provides technical support for the launch of equipment produced by the LR-Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and developing re-tooling strategies.
• Attends Design Reviews and PFMEA’s while working with design engineers to improve current and future designs of automation.
• Tracks projects using internal methods for summarizing component cost, labor, and leadtime. Develops accurate, up-to-date BOM’s and Spare Tooling Lists
• Understands, supports, and contributes to complete projects according to internal product development procedures, TQM and IS/QS-9000 requirements. Embraces Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Performs other related duties as assigned by management.
• International Travel: Up to 20% per year.

Who You Are (Basic Qualifications)

• Bachelor's degree in Mechanical Engineering.
• 5+ years of mechanical design experience.
• 3+ years of project management experience.
• Proficiency in Siemens NX or a comparable 3D CAD package.
• Experience with high-speed synchronous, asynchronous, and flexible (robotics) assembly systems.

What Will Put You Ahead

• PMP Project Management Certificate along with a Bachelor's degree in Mechanical Engineering.
• Knowledge of machine building techniques.
• Experience in scheduling and budgeting.
• Design experience with electrical connectors or cable assemblies and/or automotive assemblies.
• Mechanical cam/linkage analysis experience and toolmaking knowledge.
• Familiarity with mechanical and electrical systems design standards and machine wiring & industrial electrical logic.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Resident Engineer (Civil & Structural)

MORE INFORMATION:

• 5 Years Contract
• Location: Nanyang Drive
• Salary : up to $7,000 depending on experience
• IMMEDIATE VACANCY

Our client is a prominent engineering consultancy specializing in water management and environmental services. As part of the global Binnies Group, the company delivers innovative solutions for infrastructure development and sustainability, partnering with public and private clients to enhance urban resilience and environmental stewardship.

RESPONSIBILITIES:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor’s RFI’s and technical submittals.
• Other work scopes include but not limited to assess method statements/ instrumentation reading, coordinate with other discipline engineers and liaise with design team/ QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

REQUIREMENTS

• Good graduate Degree in Civil & Structural Engineering, recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

Lim Pey Chyi (Apple) - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423