Glamco Aviation Pte Ltd (Glamco) prides itself as a leading solutions provider for the Aerospace, Commercial, Air & Maritime Traffic Management and Defence & Security industries. Representing Systems OEMS worldwide, we provide services such as program/project management, system engineering and maintenance support to our customers.

We are searching for a Technical Officer to be part of our diverse team here in Glamco. Our Technical Officers are key component of our operations by providing technical support, installation, testing and maintenance activities (preventive and corrective) for Glamco provided systems in Singapore.

Candidates must show initiative, highly independent, hands-on, aspiration for increase role and responsibilities, and a demonstrated willingness to work in a team.

Job Responsibilities:

The Technical Officer is responsible for providing technical services for Glamco and our clients’ systems. The Technical Officer shall support the Technical Team but not limited to the following:

- Provide daily onsite or remote technical support on computer systems, communication equipment, radar or radio frequency equipment, networking, hardware and software systems.

- Provide 1stline response to faults / activation raised by clients including troubleshooting and recovery.

- Responsible for the proper maintenance (Preventive and Corrective) of systems assigned by the Project Manager / System Engineer including maintaining all relevant written records

- Perform project related activities such as deployment, installation, configuration, testing of systems to support the project

- Perform troubleshooting, predictive, preventive and corrective maintenance to ensure equipment and systems are operational including fault troubleshooting, rectification and testing supported by Technical Team

- Identify, plan and initiate required actions to maintain the systems for long term reliability, operational efficiency and improve maintainability.

- Prepare technical specifications for equipment services, system services, contract labor and ad-hoc maintenance services. Supervise and report performance of contractors to ensure good quality and progress of maintenance works, as well as full compliance with contract specifications

- To assist in the managing and controlling of maintenance equipment and spares

- Liaise, supervise and coordinate with contractors and vendors on projects, maintenance, troubleshooting and repairs works

- Support Technical Team in investigation, analyze and determine the root cause of system defects.

- Support Technical Team in providing expertise for new programs and system

- Ensure project and maintenance SLA (Service Level Agreement) and customer satisfaction levels are met

- Any other technical or operations related duties that may be required allocated by Project Manager / System Engineer

- Potentially perform rotating shift (12 hours) duties in the future

Requirements

Qualification and work experience includes:

- Diploma in Information Technology, Computer Engineering Electronics, Communication Engineering or related field

- Minimum of 2 years working experience in the related field above

- Willing to work on rotating shifts (in the future), weekends and overtime

- Willing to work at multiple sites

- Must possess Class 3 Manual driving license

- Singaporean only

Technical skills include:

- Knowledge on IT system and maintenance including computer servers, workstations, network switches and firewall troubleshooting

- Knowledge on Firewall, Backup solution, 2FA solution and Anti-Virus solution

- Knowledge on OT system and maintenance in Radar or Radio Frequency (RF) technologies is a real plus

- Equipment maintenance and housekeeping

- Report writing

- Vendor management

- Work at heights

Generic skills include:

- Communication

- Interpersonal skills

- Lifelong learning

- Teamwork

- Problem Solving

- Working in SME environment

About Glamco:

GLAMCO Aviation Pte Ltd (GLAMCO) prides itself as a leading solutions provider for the Aerospace, Commercial, Air & Maritime Traffic Management and Defence & Security industries. Established in Singapore since 1982, GLAMCO provides component repair and overhaul, spares support, specialized products and other related consultancy services to Aircraft operators, Defence and Security agencies, Civil Airport and Seaport Operators.

Representing Aircraft Manufacturers, Systems OEMs, Stocking Distributors and OEMs worldwide, we are able to support Programme Management, quick response and delivery. GLAMCO has also expanded its activities to include the supply of specialized equipment for the Navy, Army, as well as Civil Airport and Seaport. Since 2020s, GLAMCO has further expanded our services to provide logistics management (warehouse), system engineering and maintenance support to our customers.

To learn more about us and our products, please visit our website at www.glamco.com.sg.

If you are ready to make an impact, email your contact information and current resume to: [email protected]. Only shortlisted candidates will be notified

Job Description & Requirements

Job responsibilities and requirements

- Remote/On-site diagnosis and troubleshooting technical issues, including account setup and network configuration on the End-User devices

- Manning helpdesk calls and emails and providing prompt and accurate feedback to customers

- Manage/Change request on client site equipment

- Ensure all issues are properly logged

- Follow-up with clients to ensure their IT systems are fully functional after troubleshooting

- Provide good customer service experience

- Able to work on night shift (3 days work and 3 days off)

Work experience – 1 year or more

Languages: Mandarin and English

Role:

• Assist in preparing and reviewing technical reports and maintenance records.
• Support the Fleet Manager in organizing and monitoring maintenance schedules and repair activities.
• Track and address technical issues, ensuring timely resolution and proper documentation.
• Update and maintain technical documentation, including manuals, compliance certificates, and safety records.
• Ensure vessel operations adhere to maritime regulations and industry standards.
• Assist in preparing documentation for inspections, audits, and regulatory evaluations.
• Serve as a point of contact between ship management, crew, and shore-based technical teams.
• Coordinate with suppliers and contractors for procuring parts and services, when required.
• Arrange and participate in technical meetings, providing necessary support.
• Assist in analyzing technical data to identify trends and suggest improvements.
• Contribute to the development and implementation of technical procedures and best practices.
• Provide support during emergencies, such as technical failures or incidents, aiding in troubleshooting and resolution.

Requirements:

• Degree or diploma in Marine Engineering, Mechanical Engineering, or a related discipline.
• Previous experience in ship management, marine engineering, or a related technical field is advantageous.
• Solid understanding of shipboard systems and technical operations.
• Competence in handling technical documentation and managing data.
• Strong communication and coordination abilities.
• Capable of managing multiple tasks under pressure.
• Relevant maritime certifications or qualifications are desirable.

• Oversee the day-to-day operations of assigned vessels, ensuring compliance with HSSEQ System.
• Plan, manage, monitor, and execute vessel repairs, dry dockings, and conversions within approved budgets.
• Track vessel performance trends and implement corrective measures to optimize operations.
• Collect and evaluate emission control/compliance data (SEEMP/EEXI/CII) and obtain approvals from relevant authorities.
• Monitor class and statutory certification status, manage conditions of class, and arrange necessary surveys (e.g., flag state, Panama Canal certifications).
• Conduct regular vessel visits (minimum twice a year, including port and sailing), prepare visit reports, and address identified deficiencies.
• Prepare management reports (biannual, triannual, or quarterly) for the General Manager’s approval, based on Principal requirements.
• Enforce strict cost control over the annual operating budgets of assigned vessels.
• Review monthly financial reports and approve cost controls before submitting them to the Technical Manager.
• Contribute to the training and onboarding of new crew members and office staff.
• Support SIRE inspections and TMSA audits.

Requirements:

• Possess a Marine Engineer Class 1 (Chief Engineer Unlimited) Certificate.
• A minimum of 5 years of experience in tanker operations is essential.
• At least 2 years of sea-going experience as a Chief Engineer on LPG or Oil Tankers is required.
• Experience as a Technical Superintendent, especially with tankers (LPG/Oil), is advantageous.
• Demonstrates a strong work ethic and teamwork skills.
• Excellent organizational and communication abilities.
• Hands-on experience in technical management with practical skills.
• Flexibility to travel on short notice based on operational needs.
• Comprehensive understanding of maritime safety regulations and compliance requirements.
• Proficiency in risk assessment and accident investigation procedures.
• Expertise in budget management and cost control for vessel operations.
• Ability to effectively coordinate with ship staff, including Chief Engineers and Master Mariners, to ensure seamless operations.

Job Description & Requirements

Work under the control and direction of the appropriate Qualified Person when carry out their supervision and fully responsible to the appropriate QP.

· To liaise and conduct inspection with the Main Contractors Engineer/Supervisor.

· To assist Resident Engineer on all structural works carried out according to approved drawings

· To monitor the progress and assist Resident Engineer on structural inspection on all Structural works according to the approved drawings issued.

· To conduct C&S inspection for works the inspections forms submit by Main Contractor Engineer/Supervisor and maintain proper records.

· To check and monitor the Structural works according to the contract drawings, specifications, approved shop drawings and method of statements

Requirements:

· RTO registration with IES is mandatory

· Diploma in Civil/Structural discipline or NCSS.

· Have at least 3 years of experience in site supervision of works

· Min 2 years of experience in supervision of precast concrete element launching work for vehicular structures.

Deliver expert support and comprehensive administration of the Microsoft 365 cloud environment, ensuring a secure and reliable infrastructure.

Key Responsibilities:

• Independently research, design, implement, and manage Microsoft 365 solutions for the organization.
• Oversee the Microsoft 365 environment, maintaining optimal availability, reliability, and performance.
• Continuously monitor system health; review, analyze, and test system performance.
• Conduct annual refresh for hardware, including endpoint devices and network equipment.
• Provide regular updates, perform backups, and restore data as needed.
• Work with internal teams to enhance functionality and improve user experience.
• Facilitate onboarding and offboarding processes for new hires and leavers.
• Document system configurations, processes, and create IT user guides.
• Deliver high-level support, working with internal teams and external vendors to resolve both onsite and offsite issues (including vessel support).
• Travel internationally to support vessel IT systems when vendors are unable to resolve issues remotely.
• Serve as the IT procurement officer, managing vendor relationships with excellent vendor management skills.
• Track and manage billing and subscriptions for SaaS applications and Microsoft 365.
• Maintain an inventory of IT hardware and software assets.
• Perform daily, monthly, and annual IT operational checks.

Requirements:

• Minimum 1 year of experience managing and administering Microsoft 365 environments.
• Over 2 years of experience as L1 support in a mid- to large-sized enterprise.
• Strong skills in customer service, communication, and problem-solving.
• Able to work independently as well as collaboratively in a team.
• Familiarity with networking and firewall configurations is a plus, though not mandatory.

Responsibilities:

-Inspection and supervision of Architectural and building works as required under the project and mandated under the Building Control Act & Regulations.

-Inspect and conduct all required tests for the project.

-Preparation & issuance of site memos on bad workmanship & non-compliant works.

-As-built drawings checks.

-Monitor progress of the works on site and at any off-site manufacturing facilities and report delays immediately.

-Observe and comply with site safety, submit all reports as directed, and ensure that works are carried out in a safe and proper manner

-Attend and witness all on-site testing of architectural works as required by the Client and authorities.

-Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.

-Inspect the completed works and record all defects for rectification before handing them over to the Client.

-Others duties and responsibilities listed in project's contract.

Job Requirements:

-Candidate must be registered with BCA/IES as Resident Technical Officer

-At least 3 Year(s) of working experience in the related field is required for this position.

-Required Skill(s): Supervision of Architectural, building and construction works.

-Must attain certification in "BCSS" and "Develop a Risk Management Implementation Plan (bizSAFE Level 2)".

-Preferably Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

-Good communication skills

ssist QPS team on the site supervision and coordination works.

• Ensure the works are carried out according to contract and in a safe manner

• Attend site meetings.

• Review all submission.

Requirements:

• Registered with IES as Resident Technical Officers (RTO) in Singapore.

• Experience in LTA/HDB project would be an advantage

• Able to travel between sites

Responsibilities:

-Inspection and supervision of workplace safety-related works as required under the project and mandated under the Building Control Act & Regulations and Workplace safety and Health Act & Regulations.

-Inspect and conduct all required tests/inspections for the project.

-Preparation & issuance of site memos on bad workmanship & non-compliant works.

-Observe and comply with site safety, submit all reports as directed, and ensure that works are carried out in a safe and proper manner

-Attend and witness all on-site inspections as required by the Client and authorities.

-Others duties and responsibilities listed in project's contract.

Job Requirements:

-Candidate must be registered with BCA/IES as Resident Technical Officer

-At least 3 Year(s) of working experience in the related field is required for this position.

-Required Skill(s): Supervise workplace safety-related matters.

-Must attain certification in "BCSS" and "Develop a Risk Management Implementation Plan (bizSAFE Level 2)".

-Preferably specialized in workplace safety-related certificates or equivalent.

-Good communication skills

Work under the control and direction of the appropriate Qualified Person when carry out their supervision and fully responsible to the appropriate QP.

· To liaise and conduct inspection with the Main Contractors Engineer/Supervisor.

· To assist Resident Engineer on all structural works carried out according to approved drawings

· To monitor the progress and assist Resident Engineer on structural inspection on all Structural works according to the approved drawings issued.

· To conduct C&S inspection for works the inspections forms submit by Main Contractor Engineer/Supervisor and maintain proper records.

· To check and monitor the Structural works according to the contract drawings, specifications, approved shop drawings and method of statements

Requirements:

· RTO registration with IES is mandatory

· Diploma in Civil/Structural discipline or NCSS.

· Have at least 3 years of experience in site supervision of works

· Min 2 years of experience in supervision of precast concrete element launching work for vehicular structures.

Job Description - Business Analyst

We are seeking a highly motivated and detail-oriented Business Analyst to join our dynamic team. The ideal candidate will possess a strong analytical mindset, excellent communication skills, and a deep understanding of business processes. The Business Analyst will play a crucial role in gathering, analyzing, and documenting business requirements, as well as facilitating effective communication between business stakeholders and technical teams. This position requires a blend of business acumen, technical proficiency, and problem-solving abilities to drive successful project outcomes.

Responsibilities:

• Provide technical and information support on applications to customers via email, messaging, telephone, and on-site when necessary.
• Perform basic troubleshooting, including writing fundamental SQL scripts, on reported issues.
• Escalate technical issues to relevant parties and follow through diligently until resolution.
• Monitor ongoing batch jobs to ensure successful execution without failure.
• Provide monthly reports.
• Perform SIT Testing, UAT Testing of Service Requests and reported defects.
• Ensure timely delivery of development work with quality, meeting internal and external customer expectations.
• Update relevant documents on all executed changes in a timely manner.
• Oversee, update, and follow up on the defect tracking list until all issues are resolved.
• Collaborate effectively with team members to meet project targets and quality objectives.
• Interact effectively with customers from different departments.
• Conduct business process analysis and recommend improvements.
• Develop and maintain project documentation, including requirements, specifications, and user manuals.
• Assist in implementing IT solutions to meet business needs.

Requirements:

• Minimum GCE O/N Level, ITE, or Diploma in a related discipline.
• Preferably with 3 years of IT-related experience.
• Experience using SQL query tools is preferred.
• Strong interpersonal skills.
• Positive attitude towards meeting new challenges.
• Experience with project management tools and methodologies is a plus.
• Ability to work independently and as part of a team.
• Strong problem-solving skills and attention to detail.
• Fresh graduates are welcome to apply.

Job Responsibilities:

Responsible for perform as the team lead on project delivery in development, integration, testing and deployment of ServiceNow solution for our clients across various platform workflows :

• Workflow for IT Technology: ITSM, ITOM, ITAM, and AIOps
• Workflow for Employees and Customers: HRSD, LSD, CSM, FSM
• IRM/GRC, or Integrated Risk Management
• App Engine and Integration Hub as part of the creator workflow
• Prepare technical specifications as required deliverables.
• Provider oversight and unit testing of code along with guiding the project team and client in completing the UAT.

Qualification

• Bachelor’s degree in Computer Science or a related technical field.
• Min 5 - 8 years experiences in proven hands on experience in ServiceNow or any other ITSM solution with client
• Must have ServiceNow Certified System Administrator or Certified Application Developer or Certified Implementation Specialist
• Hands on experience in development & deployment of ServiceNow or other IT workflow
  
  

Job Description - Business Analyst

We are seeking a highly motivated and detail-oriented Business Analyst to join our dynamic team. The ideal candidate will possess a strong analytical mindset, excellent communication skills, and a deep understanding of business processes. The Business Analyst will play a crucial role in gathering, analyzing, and documenting business requirements, as well as facilitating effective communication between business stakeholders and technical teams. This position requires a blend of business acumen, technical proficiency, and problem-solving abilities to drive successful project outcomes.

Responsibilities:

• Provide technical and information support on applications to customers via email, messaging, telephone, and on-site when necessary.
• Perform basic troubleshooting, including writing fundamental SQL scripts, on reported issues.
• Escalate technical issues to relevant parties and follow through diligently until resolution.
• Monitor ongoing batch jobs to ensure successful execution without failure.
• Provide monthly reports.
• Perform SIT Testing, UAT Testing of Service Requests and reported defects.
• Ensure timely delivery of development work with quality, meeting internal and external customer expectations.
• Update relevant documents on all executed changes in a timely manner.
• Oversee, update, and follow up on the defect tracking list until all issues are resolved.
• Collaborate effectively with team members to meet project targets and quality objectives.
• Interact effectively with customers from different departments.
• Conduct business process analysis and recommend improvements.
• Develop and maintain project documentation, including requirements, specifications, and user manuals.
• Assist in implementing IT solutions to meet business needs.

Requirements:

• Minimum GCE O/N Level, ITE, or Diploma in a related discipline.
• Preferably with 3 years of IT-related experience.
• Experience using SQL query tools is preferred.
• Excellent English writing skills.
• Strong interpersonal skills.
• Positive attitude towards meeting new challenges.
• Experience with project management tools and methodologies is a plus.
• Ability to work independently and as part of a team.
• Strong problem-solving skills and attention to detail.
• Fresh graduates are welcome to apply.

About Us:
StarMedia Singapore is a leading creative agency specializing in innovative marketing and design solutions. We collaborate with top brands to transform concepts into reality, from immersive experiences to impactful displays.

Position Overview:
We are seeking a talented Drafter to join our team. In this role, you will create compelling 3D visualizations and produce precise technical drawings and keylines for fixtures and point-of-sale (POS) displays. Your work will play a vital role in ensuring creative designs are structurally sound, visually appealing, and production-ready.

Key Responsibilities:

• Develop high-quality 3D visualizations of designs.
• Produce accurate technical drawings and keylines for fixtures and small POS displays.
• Collaborate with the production team to ensure designs meet specifications for structure and finishings.
• Ensure all drawings align with brand guidelines and production standards.
• Review and refine designs to maintain the highest quality, accuracy, and functionality.
• Communicate effectively with internal teams and external stakeholders.

Qualifications:

• Proven experience in drafting technical drawings and keylines, preferably in fixtures and point-of-sale displays.
• Skilled in 3D visualization and proficient in drafting software such as AutoCAD and Adobe Illustrator.
• Meticulous attention to detail and a strong commitment to accuracy.
• Excellent communication skills with the ability to work seamlessly with production teams.
• Bilingual proficiency in English and Chinese is highly preferred for effective collaboration with diverse stakeholders.

What We Offer:

• A supportive and creative work environment.
• Opportunities to contribute to high-profile projects with global brands.

If you’re a detail-oriented drafter with a passion for creating impactful designs, we want to hear from you!

Resident Technical Officer (M&E)

Responsibilities:

-Inspection and supervision of M&E works as required under the project and mandated under the Building Control Act & Regulations.

-Inspect and conduct all required tests for the project.

-Preparation & issuance of site memos on bad workmanship & non-compliant works.

-As-built drawings checks.

-Monitor progress of the works on site and at any off-site manufacturing facilities and report delays immediately.

-Observe and comply with site safety, submit all reports as directed, and ensure that works are carried out in a safe and proper manner

-Attend and witness all on-site testing of architectural works as required by the Client and authorities.

-Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.

-Inspect the completed works and record all defects for rectification before handing them over to the Client.

-Others duties and responsibilities listed in project's contract.

Job Requirements:

-Candidate must be registered with BCA/IES as Resident Technical Officer

-M&E RTO shall be accredited with the Joint Accreditation Committee of the Institute of Engineers Singapore and the Association of Consulting Engineers.

-At least 3 Year(s) of working experience in the related field is required for this position.

-Required Skill(s): Supervision of M&E, building and construction works.

-Must attain certification in "BCSS" and "Develop a Risk Management Implementation Plan (bizSAFE Level 2)".

-Preferably Executive specialized in Engineering - M&E or equivalent.

-Good communication skills

The RTO Shall:

1) Have a Diploma in Civil/ Structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and shall be accredited by JAC of IES/ACES as QSS; and

2) Have Minimum three (3) Years of relevant experience in projects similar in nature to be Works in the Civil Contracts.

DUTIES AND RESPONSIBILITIES OF SITE SUPERVISORY STAFF

As a guide, the duties and responsibilities of the site supervisory staff is outlined below. The list does not purport to completely embrace the duties expected and the site supervisory staff ought to exercise his discretion to go beyond what is stipulated herein when carrying out his duties.

1) GENERAL

a)To carry out site supervision and inspection of the works including any off-site manufacturing as instructed by the consultant team to ensure that works are constructed to required quality and accuracy.

b)To study the contract documents and drawings and verify if there are any discrepancies among the drawings. All discrepancies shall be brought to the attention of the Consultants concerned.

c)To provide standing supervision as and when directed by the consultant team.

d)To ensure that all installation methods and material used are in accordance with the contract drawings and specifications.

e)To liaise with the contractors and the Architect / M&E / C&S Engineer in the checking and approval of shop drawings, catalogues, and samples.

f)To liaise with the contractors in the coordination of site works & resolve site installation problems.

g)All problems on site shall be referred immediately to the C&S Engineer /Architect / M&E . The Resident Engineer sahll issue sketches or directions as and when necessary. All site memos shall be copied to the Consultants.

h)To monitor and ensure that the site programme is in accordance with the approved construction programme. Any deviations from the construction schedule shall be reported immediately to the C&S Engineer /Architect / M&E. In the event of delays, the Resident Engineer shall assist the contractors to mitigate delays but without comprising on the quality.

i)To ensure that the contractors maintain work safety, cleanliness, and tidiness of the site.

j)To ensure that the main contractor and sub-contractors comply with the Ministry of Manpower’s guidelines and recommendations for construction safety and the owner’s in-house safety management system.

2)GENERAL

a)To check on site that all materials used are of the approved type and of the specified quality.

b)To check and assess temporary works by the contractor for safety and compliance with regulations.

c)To check service routes and contractor’s setting out and report any deviations to the consultant team.

d)To check on site that all installation works are of the approved methods.

e)To check on site that all material and equipment used have been approved by the Architect / M&E / C&S Engineer.

f)To ensure that contractors shall not proceed to the next stage of construction/installation if work is not in accordance with specification, approved method, or design.

g)To witness tests carried out by contractors and record the results, and assisting in testing and commissioning of all M&E systems.

h)You shall ensure that all reinforcement, formwork, penetrations, etc. are finally checked by you prior to concreting. All concrete pours during office hours and all critical pours even after office hours shall be supervised by you personally (i.e. standing supervision).

i)To record all variations as instructed or approved by the consultant team.

j)To inspect and take over completed works.

k)To manage and control a team of site staff or Resident Technical Officer(s).

l)Assist in coordinating Contrator’s works, attending meetings, and ensuring compliance with regulations.

3)COST AND RECORDS

a)To record collate and file all incoming and outgoing design, shop, construction, and coordination drawings. All old construction drawings shall be stamped ‘superseded’ and no checking shall be carried out on the superseded drawings.

b)To record, collate and file all incoming and outgoing mail pertaining to your scope of work.

c)To check and record the contractor’s site progress. The site supervisory staff shall be required to submit daily progress report to the Consultants at specified intervals.

d)To maintain proper and updated daily record of all works done on site, including records of tests, inspections, status of work, safety, site diary, material and equipment on site, labour, dayworks, provisional quantities, etc. and all other records as directed by Building Control Authorities.

e)To check that contractor executes preliminaries items.

f)To generate defects list, supervise and monitor progress of rectification works and ensure that all defects are rectified as per Consultant’s advice.

g)To advise the Consultants on the percentage of works completed for the purpose of verifying progress payment valuation.

h)To check contractor’s claims and variation orders. Actual site checks and measurements shall be carried out.

i)To ensure that the contractors record accurately on drawings, the installation works on site. This is to ensure that the as-built drawings reflect accurately the work that has been done on site. Also to check against the consultants’ drawings and identify and highlight the changes of variation orders so that consultants can direct the contractor to finalise the as-built drawings.

4)WORK PERFORMANCE

a)Knowledge of Work

b)Quality of Work

c)Work Output

d)Organizational Ability

e)Team Work

f)Sense of Responsibility

g)Commitment to Job

h)Initiative

i)Reaction under Pressure

j)Language Ability

k)Conduct

l)Integrity

m)Site Safety

5)MANAGERIAL / SUPERVISORY SKILLS

a)Setting Objective

b)Leadership

c)Power of Analysis

d)Resource Management

Job Scope:

Art:

Main duty:

1. To assist the art dept with acquisition of materials (receiving, DO processing of purchases, sorting and keeping purchases) as well as do paperwork for condemnation of obsolete or damaged items, carry out disposal

2.To manage maintenance and upkeep of Art rooms and resources in the Art Block (6 Art rooms and Kiln room, Woodwork room, darkroom and other related areas, including art materials and assets. E.g, Drill press, Bend Saw, 3D printers)

3.To supervise students at work when no teaching staff is around, invigilate tests and internal exams when called upon for assistance.

4. To provide support in managing the attendance of Sec 1-4 AEP Centre students and communicate with sending schools and parents on results and other admin matters

5. To oversee security of the art rooms by monitoring CCTV data, locking up rooms at 6pm.

6. To provide support and logistical assistance for department and students’ participation (Eg SYF Art Festival) and organisation of art exhibitions (Eg in 2025, Art Festival)

7. To assist in photo-documentation of students at work for purposes of T&L review

8. To oversee any repairs or renovation works being carried out (Eg Renovation of art gallery)

Music:

Main duty:

1. To assist the music dept with acquisition of materials and resources/instruments, repair of instruments as well as all related admin related to procurement of goods or services (receiving, DO processing of purchases, sorting and keeping purchases)

2. To assist in the maintenance and upkeep of the 5 music-learning rooms, including management of the library, cataloguing and stock taking

3. To supervise students at work on occasions when teaching staff is not around.

4. To oversee security of the art rooms by monitoring CCTV data, locking up rooms by 6pm during term time.

5. To assist in setting up for lessons in terms of instruments / computer / electronic set up

7. To assist in setting up of video cameras for practical examinations

Working Arrangement:

Contract Duration: Jan 2025 - Jan 2026

Working Hours:

• Mondays to Thursdays: 9:00am to 6:00pm, inclusive of 45 minutes lunch break

• Fridays: 9:00am to 5:30pm, inclusive of 45 minutes lunch break

Salary:

$1800 (16 Jan 2025 - 30 Jun 2025)

$1980 (1 Jul 2025 - 15 Jan 2026)

Job Requirements:

a. Good communication and interpersonal skills

b. Good team player with a high level of initiative and independence.

c. Proficient in MS Office and Excel

d. Candidate with prior working experience in schools (at least in the last 2 consecutive years), directly with students.

EA License No.: 96C4864

Reg. No.: R22110485

Glamco Aviation Pte Ltd (Glamco) prides itself as a leading solutions provider for the Aerospace, Commercial, Air & Maritime Traffic Management and Defence & Security industries. Representing Systems OEMS worldwide, we provide services such as program/project management, system engineering and maintenance support to our customers.

We are searching for a Technical Officer to be part of our diverse team here in Glamco. Our Technical Officers are key component of our operations by providing technical support, installation, testing and maintenance activities (preventive and corrective) for Glamco provided systems in Singapore.

Candidates must show initiative, highly independent, hands-on, aspiration for increase role and responsibilities, and a demonstrated willingness to work in a team.

Job Responsibilities:

The Technical Officer is responsible for providing technical services for Glamco and our clients’ systems. The Technical Officer shall support the Technical Team but not limited to the following:

- Provide daily onsite or remote technical support on computer systems, communication equipment, radar or radio frequency equipment, networking, hardware and software systems.

- Provide 1stline response to faults / activation raised by clients including troubleshooting and recovery.

- Responsible for the proper maintenance (Preventive and Corrective) of systems assigned by the Project Manager / System Engineer including maintaining all relevant written records

- Perform project related activities such as deployment, installation, configuration, testing of systems to support the project

- Perform troubleshooting, predictive, preventive and corrective maintenance to ensure equipment and systems are operational including fault troubleshooting, rectification and testing supported by Technical Team

- Identify, plan and initiate required actions to maintain the systems for long term reliability, operational efficiency and improve maintainability.

- Prepare technical specifications for equipment services, system services, contract labor and ad-hoc maintenance services. Supervise and report performance of contractors to ensure good quality and progress of maintenance works, as well as full compliance with contract specifications

- To assist in the managing and controlling of maintenance equipment and spares

- Liaise, supervise and coordinate with contractors and vendors on projects, maintenance, troubleshooting and repairs works

- Support Technical Team in investigation, analyze and determine the root cause of system defects.

- Support Technical Team in providing expertise for new programs and system

- Ensure project and maintenance SLA (Service Level Agreement) and customer satisfaction levels are met

- Any other technical or operations related duties that may be required allocated by Project Manager / System Engineer

- Potentially perform rotating shift (12 hours) duties in the future

Requirements

Qualification and work experience includes:

- Diploma in Information Technology, Computer Engineering Electronics, Communication Engineering or related field

- Minimum of 2 years working experience in the related field above

- Willing to work on rotating shifts (in the future), weekends and overtime

- Willing to work at multiple sites

- Must possess Class 3 Manual driving license

- Singaporean only

Technical skills include:

- Knowledge on IT system and maintenance including computer servers, workstations, network switches and firewall troubleshooting

- Knowledge on Firewall, Backup solution, 2FA solution and Anti-Virus solution

- Knowledge on OT system and maintenance in Radar or Radio Frequency (RF) technologies is a real plus

- Equipment maintenance and housekeeping

- Report writing

- Vendor management

- Work at heights

Generic skills include:

- Communication

- Interpersonal skills

- Lifelong learning

- Teamwork

- Problem Solving

- Working in SME environment

About Glamco:

GLAMCO Aviation Pte Ltd (GLAMCO) prides itself as a leading solutions provider for the Aerospace, Commercial, Air & Maritime Traffic Management and Defence & Security industries. Established in Singapore since 1982, GLAMCO provides component repair and overhaul, spares support, specialized products and other related consultancy services to Aircraft operators, Defence and Security agencies, Civil Airport and Seaport Operators.

Representing Aircraft Manufacturers, Systems OEMs, Stocking Distributors and OEMs worldwide, we are able to support Programme Management, quick response and delivery. GLAMCO has also expanded its activities to include the supply of specialized equipment for the Navy, Army, as well as Civil Airport and Seaport. Since 2020s, GLAMCO has further expanded our services to provide logistics management (warehouse), system engineering and maintenance support to our customers.

To learn more about us and our products, please visit our website at www.glamco.com.sg.

If you are ready to make an impact, email your contact information and current resume to: [email protected]. Only shortlisted candidates will be notified

Responsibilities:

• Deliver data centre operations support across multiple data centres

• Respond to all alarms/alerts set in Data Center Infrastructure Management (DCIM), Server Automation Operations System (SAOS), CCTV, Access Control Systems (ACS), and other functions (EHS, Security, etc),

• Provide deep understanding and intelligence of the criticality and impact of the incidents to the resolver groups.

• Ensure detailed records of alarm handling activities, including actions taken, resolutions in ticketing tools and file incident reports.

• Be available to coordinate as an incident commander in event of an issue.

• Support program managers and facilitate project deliverables, improve overall operational and engineering initiatives.

• Conduct root cause analysis (RCA) to determine recurring problems to their source.

• Employ in-depth questioning and analysis techniques such as five whys to determine the underlying cause of the incident or problem.

• Handle ticketing system

• Perform duties in compliance with SOP.

Requirements:

• Diploma/Degree in Information Technology.

• 2 years+ experience in command center, service center, or similar 24x7 operations center environment

• Ability to quickly triage multiple incidents and assign the right priority based on risk and confidence levels

• Knowledge of technical elements associated with systems such as IP Networks, DC Environment and Server Health.

• Outstanding verbal and written communication skills required, work with minimal direction, meeting goals, attention to details and an eye for continuous improvements

• Ability to successfully interact at all levels of the organization, including with clients, while functioning as a team player required.

• Basic working knowledge of data protection policies such as GDPR and the need to keep sensitive information secure.

Job Scope:

• Support the maintenance and support of client's ICT systems.

This requires:

o working closely with the client's business users in scoping user requirements;

o budgeting and procurement of professional services to maintain and support ICT systems;

o strong project management and stakeholder engagement to ensure timely delivery and cost marksmanship;

• Manage client's ICT vendors to ensure satisfactory delivery of services.

• Support maintenance of existing client's ICT systems to ensure their smooth operations and availability, including management of contracts and change requests.

• Ensure that client's ICT systems comply with prevailing government ICT policies and requirements.

• Regularly identify and exploit appropriate technology, review and improve customers' work processes and conduct business process re-engineering when required

Requirements:

• Trained in Information Technology, Computer Science, Engineering (Computing/Telecommunication) or equivalent

• At least 3 years of relevant working experience in IT project management in the scoping, design, development, implementation and maintenance of web-based application systems

• Minimum 2 years of IT knowledge in Web Development, Cloud Technologies, Cloud Security, Agile Methodology, Database Management, and Troubleshooting and Technical Support

• Working knowledge of Cloud Service Providers, Cybersecurity, and ICT Governance will be an added advantage

• Good knowledge of computer concepts such as Operating Systems, Networking, Virtualization, Web Technologies, Cloud Computing, Deployment and DevOps, Security Best Practices,

• Self-motivated, drive, a good team players and strong ability to multi-task

• Excellent verbal, written communication and interpersonal skills

• Strong analytical, presentation and negotiation skills

Salary: TBA

Location: East

EA License No.: 96C4864

Reg. No.: R24121728

Role:

• Generate Technical Proposals to support the Sales Team.
• Serve as the primary contact for customers regarding product queries, orders, and deliveries, and provide administrative support for the Sales Team.
• Oversee the sales order process, including purchase orders, invoices, and issuing sales transaction orders.
• Verify customer orders, including customer details and payment information.
• Respond to customer inquiries, feedback, or complaints via phone or email.
• Ensure quotes align with raised orders, confirming correct pricing, terms, and conditions.
• Record data and maintain systems as outlined in the sales process SOP and as directed by the Sales Team.
• Perform any ad-hoc tasks as required.

Requirements:

• Minimum of 2 years of relevant experience in the Engine and Propulsions Systems or related industry in administration or technical service support.
• Goal-oriented and meticulous in providing accurate information.
• Capable of working independently and as part of a team.
• Able to handle pressure and thrive in a fast-paced environment.

Deliver expert support and comprehensive administration of the Microsoft 365 cloud environment, ensuring a secure and reliable infrastructure.

Key Responsibilities:

• Independently research, design, implement, and manage Microsoft 365 solutions for the organization.
• Oversee the Microsoft 365 environment, maintaining optimal availability, reliability, and performance.
• Continuously monitor system health; review, analyze, and test system performance.
• Conduct annual refresh for hardware, including endpoint devices and network equipment.
• Provide regular updates, perform backups, and restore data as needed.
• Work with internal teams to enhance functionality and improve user experience.
• Facilitate onboarding and offboarding processes for new hires and leavers.
• Document system configurations, processes, and create IT user guides.
• Deliver high-level support, working with internal teams and external vendors to resolve both onsite and offsite issues (including vessel support).
• Travel internationally to support vessel IT systems when vendors are unable to resolve issues remotely.
• Serve as the IT procurement officer, managing vendor relationships with excellent vendor management skills.
• Track and manage billing and subscriptions for SaaS applications and Microsoft 365.
• Maintain an inventory of IT hardware and software assets.
• Perform daily, monthly, and annual IT operational checks.

Requirements:

• Minimum 1 year of experience managing and administering Microsoft 365 environments.
• Over 2 years of experience as L1 support in a mid- to large-sized enterprise.
• Strong skills in customer service, communication, and problem-solving.
• Able to work independently as well as collaboratively in a team.
• Familiarity with networking and firewall configurations is a plus, though not mandatory.

What if you can safeguard the future of all technologies?

Today, most of the systems are connected, automated, and remotely monitored/controlled. Be it Industrial or commercial, automation with connectivity has a huge impact on evolving sectors including HealthTech, Industry 4.0, Satellite, Defense/Military, 5G, and Smart cities. These are prone to cyberattacks due to various limitations in computation, bandwidth, and advances in Quantum computing.

Microsec (www.usec.io) is a fast-growing Singapore based company that has built an enterprise cybersecurity platform that protects against such attacks by facilitating mathematical and computationally optimized encryption algorithms supporting Post-Quantum Cryptography with Machine Learning. To protect from Zero-day attacks, the platform also enables a Machine-learning/AI-based Anomaly detection system that can run on the smallest microcontrollers to the largest supercomputers. An incredible team of various scientists and engineers from across the world has joined the incredible journey to build this technology. The team is looking for its next rockstar candidates to take the company to the next level and safeguard the future of all technologies.

MicroSec is looking for a Technical Product Manager to manage the product roadmap, features, and delivery of its IoT Security Suite. Successful applicants will be responsible for managing an awesome team of scientists and developers while further developing MicroSec’s IoT cybersecurity products.

What you’ll do

• Lead the team in the development of the software product against the roadmap via Scrum planning, development, and execution
• Write the functional issues/requirements, down to the API level
• Do hands-on work on reviewing the code and solution developed by the team
• Come up with system and solution architecture and assist developers in realizing those in an optimized form
• Work cross-function with software systems and technologies utilizing embedded, backend, cloud, python, UI/UX, cybersecurity, etc.
• Test the developed solution end-to-end, including deployment, update, and patch
• Create user flow, product sheet, specification sheets, etc.
• Perform code and design reviews.
• Undertake project scoping, time management, planning, and execution.
• Manage day-to-day operational aspects of the project timeline and scope.
• Prepare and gather project requirements and product backlog.
• Work with engineering teams to prioritize development and ensure that high-quality product is shipped on time
• Assisting user acceptance testing and quality assurance
• Assisting in pre-sales related work including preparation of proposals, decks and RFP
• Enforce project standards with both internal and external resources.
• To prepare, review, and amend technical documentation.
• To review customer requirements and tender specifications for identifying product gaps and planning with the team
• Identify, scope, and implement processes and systems to continuously improve product and service quality as well as operational effectiveness and efficiency
• Perform other duties and responsibilities as assigned.

Who you are

• Must have at least 5 years of experience in Python development and Linux environment
• Must have at least 4 years of experience in writing Machine-learning codes
• Must have at least 1 year of experience in developing solutions for embedded systems
• Must have at least 1 year of experience in managing a technical team involved in Cybersecurity and Machine Learning
• Strong experience and knowledge of Linux, On-prem infrastructure & Cloud technologies. Must be able to perform or manage minor changes and bug fixes to the existing codebase internally or with external vendors.
• University degree in Engineering/Computer Science or an equivalent field.
• Must have a strong understanding of Cybersecurity and Computer networks
• Must have strong experience with Gitlab, Epics, and Issue management
• Must have hands-on skills in code review and design of system/solution architecture
• Must have basic DevOps skills to run basic services like Docker etc to test out the services
• Knowledge of IoT is a plus
• Should have experience in setting up infrastructure, routers/switches, and management of on-prem servers
• Good knowledge of Agile and/or other project management methods or certification is a plus
• Excellent written and oral communication skills; able to communicate in all forms across the company; strong presentation skills.

• Plan, manage, and oversee all activities related to the maintenance, repairs, surveys, and certification requirements of assigned vessels, including dry-docking, conversions, or modifications, as well as preparing docking specifications, compiling costs, and final reporting.
• Update, implement, and monitor the Fleet Management system, including Planned Maintenance Programs (PMS-Eng).
• Conduct ship inspections, ensuring at least one port or sailing visit is made, and provide associated reports.
• Develop a dynamic work plan and action list in collaboration with the Chief Engineer.
• Ensure the vessel’s maintenance adheres to the Company’s policies, and regularly receive progress reports.
• Assist in the selection of Chief Engineers, Engineer Officers, and ratings for vessels under your care.
• Evaluate the performance of Chief Engineers, Engineer Officers, and ratings.
• Handle the Company and fleet’s oil majors’ vetting requirements.
• Monitor fuel oil and lube oil test results, taking corrective action promptly when needed.
• Ensure the timely supply and maintain adequate stocks of engine room stores, spares, and maintenance items on board at all times.
• Ensure the calibration of MMC, gas detection equipment, and alcohol meters is up to date.
• Oversee the annual servicing of portable and fixed LSA & FFA equipment such as fire extinguishers, liferafts, SCBA sets, EEBD sets, lifeboat and rescue boat davit tests, EPIRB and VDR annual performance tests, lifeboat air bottles, and BA compressor air quality tests.
• Support the maintenance of the Company’s TMSA.
• Stay informed on and implement new regulations, legislation, and rules relevant to the Company and fleet.
• Assist with planning, coordinating, and attending new builds, deliveries, and ship sales as needed.
• Participate in maritime organizations, committees, and working groups as required.
• Prepare, manage, and monitor the budget and cost control for the fleet, including docking and modifications.
• Perform other ad hoc duties as assigned by Management.

Requirements:

• Hold a Certificate of Competency (Engine) Class 1 or Class 2 (Port Limit), or alternatively Class 2 or 3 (Foreign Going) may also be considered.
• Degree or Diploma in Marine or Mechanical Engineering.
• Preferably 2 years of experience as Chief Engineer on petroleum and chemical tankers under 20,000 mt deadweight, with 4-stroke main diesel engines.
• Preferably 1 year of shore-based experience as a Technical Superintendent.
• Strong communication skills.
• Willingness and ability to travel overseas to visit or sail with company vessels or other assigned vessels as needed.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule