• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO-building shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO-Geo shall preferably possess a Diploma from Polytechnic or relevant qualifications.
• The RTO-Geo shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• The RTO-Geo shall have a certificate in Building Construction Supervisors Safety (BCSS) Course.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO shall preferably possess a Diploma from Polytechnic or Workplace Safety & Health Coordinator or possess Advanced Certificate in Workplace Safety and Health or relevant qualifications.
• The RTO shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

Duties & Responsibilities:

• Report and provide assistance to QAQC Engineer & Senior Inspector
• Inspection of the completed tunnel precast elements
• Keeping of Quality Control (QC) records at all stages of the segmental tunnelling lining production
• Testing and examining the materials used
• Checking on the workmanship of the manufacturer in connection with the tunnel precast elements production
• Inspect and checking of defects of production phase of tunnel precast elements and provide finding and recommendation on remedial measures to mitigate the defects

Requirements:

• A Civil Engineering Diploma recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Min. 3 years of relevant experience in the inspection and quality control monitoring of high quality, mass produced precast concrete products
• Will be stationed full time at precast yard.
• Require valid RTO Certification
• Must have SSSS certification

Responsibilities

• Perform AML monitoring/review on Trade post-transaction files.
• Review/investigate Trade manual screening alerts and red flag escalated by trade processing team for potential sanction violations in accordance with SMBC policies.
• Ensure that review and investigation conclusions are adequately and properly documented for regulatory/audit level review.
• Coordinate and/or prepare the required management information reporting data as applicable
• Perform daily name screening alert clearance
• Investigate and report discrepancies and irregularities arising from transactions, system failure, etc and resolve issues including handling stakeholder’s complaints and escalating all issues to Group Head / Deputy Group Head promptly.
• Other tasks as assigned by Group Head / Team Lead
• Regular update of Procedures and Manuals to ensure the group operations is in accordance to SMBC policies, audit comments and in compliance to local as well as related overseas law and regulations
• Contribute in key initiatives and other ad hoc projects as needed

Requirements

• Bachelors degree
• Able to link diverse information to build a full picture and spot inconsistencies
• Possesses knowledge of MAS regulation on AML and Sanctions requirements including KYC, Screening
• Strong team player
• Good communications skills, hands on, independent and proactive in carrying out investigation on customers and/or transactions. Able to work with front office and back office

Responsibilities

You will be a Business Analyst focussing on Front Office requirements on Murex. This would include extending the existing implementation with these new product types as well as support for other stakeholders throughout the project.

Responsibilities:

• Design and configure the proposed solution in Murex
• Work closely with the test team to review test cases and coverage, analyse defects and provide Murex configuration advise
• Augment the existing team members to fill capability gaps and backfill existing team members, as required
• Some level of thought leadership on solution design for FO in Murex will be expected
• Provide specialist markets technology solutions to assist in simplifying the existing architecture and automating the existing process
• Participate and Lead requirements workshops, sometimes including a large number of business SMEs who are geographically distributed.

Skills

Must have

• Engineering degree (Bachelor or Masters) or equivalent or master’s degree in Finance/Business
• Preferably 3-6 years of hands-on Murex Development/ Integration/ Business Analysis experience
• Have a minimum 2 years working in Financial Markets with strong domain knowledge with exposure to multiple asset classes
• Strong functional experience across most or all of the following asset classes -Interest Rate Derivatives, FX Cash, FX Derivatives, Structured Products, Money Markets, Liquidity
• Knowledge of pricing and the end-to-end workflow of a trade in the Murex platform
• Experience working on a large scale migration/implementation/upgradation project would be beneficial
• Experience managing small teams
• Customer focus mentality
• Excellent communication skills, both written and verbal

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO shall preferably possess a Diploma from Polytechnic or Workplace Safety & Health Coordinator or possess Advanced Certificate in Workplace Safety and Health or relevant qualifications.
• The RTO shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

Duties & Responsibilities:

• Report and provide assistance to QAQC Engineer & Senior Inspector
• Inspection of the completed tunnel precast elements
• Keeping of Quality Control (QC) records at all stages of the segmental tunnelling lining production
• Testing and examining the materials used
• Checking on the workmanship of the manufacturer in connection with the tunnel precast elements production
• Inspect and checking of defects of production phase of tunnel precast elements and provide finding and recommendation on remedial measures to mitigate the defects

Requirements:

• A Civil Engineering Diploma recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Min. 3 years of relevant experience in the inspection and quality control monitoring of high quality, mass produced precast concrete products
• Will be stationed full time at precast yard.
• Require valid RTO Certification
• Must have SSSS certification

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO-building shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO-Geo shall preferably possess a Diploma from Polytechnic or relevant qualifications.
• The RTO-Geo shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• The RTO-Geo shall have a certificate in Building Construction Supervisors Safety (BCSS) Course.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all works including all civil and architectural works, plumbing, sanitary, drainage, irrigation and sewer system, commuters facilities, road works, trial trenches and utilities diversion etc.
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems systems and gantry crane and submit evaluation report endorsed by a PE
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works associated to micro-tunneling and mining, Flyover works, sewer diversion (including shaft construction and pipe-jacking operations.

Requirements:

• Diploma or Degree in Civil and Structural Engineering
• At least 4 years’ of experience, of which 3 years experience in either geotechnical works or airport construction.
• Possess a valid RTO cert by IES Singapore

InfoCepts is a global leader of end-to-end data & analytics solutions with nearly 20 years of experience, also named as Gartner’s 2020, 2021 and 2022 customers’ choice for Data & Analytics providers. We continue to grow rapidly year over year, now employing more than 1,000 people in offices across the globe. As we have grown, we have stayed true to our mission—to always help our customers stay modern that help them make smart, data-driven decisions. Since 2004, we have deployed hundreds of high performance analytics applications over web and mobile platforms, built several advanced analytics models, processed petabytes of data using Big Data technologies and delivered several high impact business solutions. Driven by our vision of delivering great customer experiences, we are looking for professionals who are passionate about making the world a better place by leveraging the power of data.

We are hiring aspiring / proven data analysts to join us in our cause of helping customer Stay Modern, ahead of the technology curve!

Roles and Responsibilities

• Using automated tools to extract data from primary and secondary sources
• Removing corrupted data and fixing coding errors and related problems
• Developing and maintaining data in databases, data systems – reorganizing data in a readable format
• Performing analysis to assess quality and meaning of data
• Filter data by reviewing reports and performance indicators to identify and correct code problems
• Using statistical tools to identify, analyze, and interpret patterns and trends in complex data sets that could be helpful for the diagnosis and prediction
• Preparing reports for stakeholders stating trends, patterns, and predictions using relevant data, with the aim of driving stakeholder action on their businesses/functions
• Building dashboards and curating data stories for use cases

Skills Required

A successful data analyst needs to have a combination of technical as well leadership skills. A background in Mathematics, Statistics, Computer Science, Information Management, Engineering, Sciences or Economics can serve as a solid foundation to build your career as a data analyst.

• 1 - 2 years of data analytics and modelling experience
• Strong proficiency in Python and SQL scripting skills
• Prior experience with at least 1 BI tool such as Tableau, PowerBI, QlikSense and/or similar software is essential
• Knowledge of how to create and apply the most accurate algorithms to datasets in order to find solutions
• Knowledge of at least one database tool such as MySQL, MS SQL and/or PostgreSQL
• Strong mathematical skills to help collect, measure, organize and analyze data
• Adept at queries with good communication and stakeholder management skills

This is a 12-month contract Contigent Workforce, 100% work-from-home role.

This role will be focused on the functional scope of workforce management and risk management. Providing support on vendor operational and risk process audits, workforce management administration, and vendor adherence to the agreed KPIs.

Responsibilities

• Manage the vendor adherence to service level agreements for the outsourced sales operations.
• Collaborate with vendor workforce management POC at the vendor sites to ensure the implementation and compliance to established KPIs (key performance indicators).
• Develop and maintain regional workforce management KPI reporting for senior management.
• Maintain a log on vendor operations exposure to risk and share findings with regional Sales Productivity PMs.
• Conduct operational process audits and ensure closure of the corrective actions required at the vendor level.
• Identify and provide feedback on bottoms-up tool and workforce management process efficiency gains with analytical perspective.

Skills

• 5+ years’ experience in vendor operations, change management or operational process improvement role.
• Must be good with managing and understanding the data (SQL, Tableau, PowerBI).
• Process and detail-oriented execution style.
• Critical thinker and resourceful problem-solver
• Comfortable with ambiguity and thrives in a fast-paced, dynamic environment.
• Receptive to open feedback
• Bachelor's Degree preferred

UEN: 199700895N

Key Responsibilities:

• Must To Have Skills: Proficiency in .Net Full Stack Development, Docker, and Kubernetes.

• Good To Have Skills: Experience with Microsoft Azure Architecture.

• Strong understanding of software development principles and methodologies.

• Experience with Agile development methodologies.

• Solid grasp of software testing and debugging techniques.

Roles & Responsibilities:

• Design, develop, and maintain software applications using .Net Full Stack Development.

• Utilize Docker and Kubernetes to deploy and manage applications in a containerized environment.

• Collaborate with cross-functional teams to analyze, design, code, and test multiple components of application code.

• Perform maintenance, enhancements, and/or development work on software applications.

• Ensure software applications are scalable, reliable, and maintainable

Job Summary

We are looking for Technical Business Analyst to plan, conduct and support the project discussion and workshops with the business users including documentation.

Mandatory Skill-set

• Bachelor in Computer Science, Computer Engineering, Information Technology & Engineering;
• At least 3+ years of working experience as a Business Analyst in project setting within Engineering and Smart Operations Industry;
• Proficient in gathering and documenting business requirements, creating functional specifications, and user stories;
• Experience in conducting HMI/SCADA Graphical User Interface (GUI) development and user journey workshops;
• Experience in facilitate technical discussion (smart operations, telemetry network, meter alarm management, control room layout planning) and documentation;
• Excellent analytical and problem-solving skills, with the ability to think critically and strategically;
• Strong interpersonal and communication skills, with the ability to effectively communicate complex ideas to both technical and non-technical stakeholders;
• Must be able to work independently and collaboratively in a fast-paced environment;
• Attention to detail and commitment to producing high quality, accurate work;
• Good communication, interpersonal, and written skills.

Desired Skill-set

• IIBA Business Analysis certification.

Responsibilities

• Responsible to facilitate technical discussion and workshops with various business engineering teams and create functional (technical) specifications as well as user stories;
• Conduct HMI/SCADA Graphical User Interface (GUI) development and user journey workshops including pre&post workshop documentations;
• Gather, collate, and analyze the technical requirements and provide clear functional specifications for the end-to-end proposed solution;
• Validate the documented requirements with business stakeholders to ensure accuracy, completeness, and alignment with business objectives;
• Devise comprehensive test plans (including test scenarios and test cases) to test IT deliverables;
• Consult Solution Architect or Software Design Manager for technical requirements and validations.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO-building shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO-Geo shall preferably possess a Diploma from Polytechnic or relevant qualifications.
• The RTO-Geo shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• The RTO-Geo shall have a certificate in Building Construction Supervisors Safety (BCSS) Course.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all works including all civil and architectural works, plumbing, sanitary, drainage, irrigation and sewer system, commuters facilities, road works, trial trenches and utilities diversion etc.
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems systems and gantry crane and submit evaluation report endorsed by a PE
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works associated to micro-tunneling and mining, Flyover works, sewer diversion (including shaft construction and pipe-jacking operations.

Requirements:

• Diploma or Degree in Civil and Structural Engineering
• At least 4 years’ of experience, of which 3 years experience in either geotechnical works or airport construction.
• Possess a valid RTO cert by IES Singapore

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO shall preferably possess a Diploma from Polytechnic or Workplace Safety & Health Coordinator or possess Advanced Certificate in Workplace Safety and Health or relevant qualifications.
• The RTO shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

Duties & Responsibilities:

• Report and provide assistance to QAQC Engineer & Senior Inspector
• Inspection of the completed tunnel precast elements
• Keeping of Quality Control (QC) records at all stages of the segmental tunnelling lining production
• Testing and examining the materials used
• Checking on the workmanship of the manufacturer in connection with the tunnel precast elements production
• Inspect and checking of defects of production phase of tunnel precast elements and provide finding and recommendation on remedial measures to mitigate the defects

Requirements:

• A Civil Engineering Diploma recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Min. 3 years of relevant experience in the inspection and quality control monitoring of high quality, mass produced precast concrete products
• Will be stationed full time at precast yard.
• Require valid RTO Certification
• Must have SSSS certification

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore